Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Modeling and Software”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,663 records · Page 15Linked to original sources
USGS2025

Factors affecting the distribution of water-bearing fractures in the bedrock aquifers of West Virginia

Bedrock aquifers cover 23,601 square miles within the State of West Virginia and comprise 97.4 percent of the surficial area within the State; the remaining 2.6 percent (621 square miles) consists of alluvial sand-and-gravel and glacial outwash aquifers bordering the State’s major rivers. While West Virginia’s alluvial aquifers have been studied extensively, bedrock aquifers have only been characterized for studies completed in a few areas in Jefferson, McDowell, and Monroe Counties. Bedrock aquifers are water supplies for public supply, agriculture, industry, and residential homeowner use. In this study, the U.S. Geological Survey, in cooperation with the West Virginia Department of Environmental Protection Division of Water and Waste Management, provides a statewide assessment of the occurrence and distribution of fractures within bedrock aquifers of the State and the various topographic, physiographic, and lithologic influences controlling the occurrence and distribution of bedrock fractures. The results of this study provide an increased understanding of the distribution of fractures in bedrock aquifers in West Virginia and help to verify trends that have been suspected for many years but were never well documented or verified by data. The results confirmed that the density of fractures and those that were determined to be water bearing decrease significantly with depth. A statistically significant difference in the density of fractures was observed at a depth of 215 feet for wells in the Appalachian Plateaus Physiographic Province’s and in the Valley and Ridge Physiographic Province’s aquifers; a higher density of fractures and water-bearing fractures were above a depth of 215 feet than below that depth. This is an important consideration when drilling wells for residential, commercial, industrial, or agricultural water supply. Abandoned underground coal mines are commonly believed to form large pools of water in the interconnected mine entries in abandoned room and pillar coal mines. Such pools of water can and do exist in abandoned underground coal mines, but many mines lack open entries and are held up by overburden strata and pillars that can collapse and form aquifers comprised of vast interconnected rubble zones (gob), especially in older mines. Data assessed for this study showed that shale-corrected values of effective porosity for limestone aquifers in West Virginia had a median value of 2 percent and an average value of 4 percent and generally are mineralized with low effective porosity. Argillaceous or sandy limestone has a median shale-corrected porosity of 4 percent and an average shale-corrected porosity of 5 percent. The median and average shale-corrected porosity of sandstone aquifers was estimated to be 14 percent, but the median shale-corrected porosity for argillaceous or calcareous sandstone was 5 percent and the average shale-corrected porosity for argillaceous or calcareous sandstone was 6 percent. Even though shale has a relatively high total sonic porosity compared to other lithologies, shale and siltstone had relatively low shale-corrected porosity, ranging from 0 to 2 percent. Well yields were previously documented to be highest in valley settings, lowest on hilltops, and intermediate on hillsides. Transmissivity data provided by this study confirm this general pattern within the Appalachian Plateaus Province; however, the Valley and Ridge Province does not follow this pattern. While still lowest on hilltop settings, the highest well yields were in hillside settings. The trend for the Valley and Ridge Province was likely skewed because of 9 high-yield wells specifically targeting deeper thin limestone units, such as the Tonoloway and Helderberg Limestones, at depths with transmissivity in excess of 2,000 feet squared per day in Mineral County, West Virginia, or targeting karst aquifers in Berkeley, Jefferson, or Greenbrier Counties, West Virginia. Finally, water-bearing fractures have been hypothesized to comprise a small number of all fractures within a typical bedrock well in West Virginia. Data collected for this study support this theory. A total of 3,403 fractures were identified during this study; 3,151 (92.6 percent) of those fractures are low-transmissive, and only 252 (7.4 percent) fractures are water-bearing. Even though a well may contain many fractures, less than 8 percent are considered water-bearing fractures.

West Virginia↗
USGS2025

Reconnaissance of potential alternate water supply sources for the City of Gary, West Virginia

Seven potential sources of water, consisting of free-flowing discharge from abandoned coal mines at six locations and one abandoned flooded underground coal mine air shaft, were sampled for chemical analysis to assess the quality of the groundwater emanating from the seven mine sources. The six free-flowing mine discharge sources were also assessed for discharge by current-meter measurements on two separate occasions. The U.S. Geological Survey assessed these seven sources to provide information to the City of Gary, West Virginia (W. Va.), and the City of Gary’s consulting engineer with groundwater-quality and flow data to allow them to assess the seven sites as potential alternate sources of water for the City of Gary to augment its existing supply. For the six sites where discharge could be measured, discharge ranged from a minimum of 0.082 cubic feet per second (ft 3 /s) to a maximum of 3.685 ft 3 /s. Of the six sites measured, only two, Harmon Branch at Thorpe, W. Va. (USGS site 372201081303501) and the abandoned public-supply water wells near Havaco, W. Va. (USGS site 372358081344601), had discharge in excess of 1.00 ft 3 /s. Discharge from the abandoned public supply wells was 3.685 ft 3 /s on September 20, 2023, and 2.888 ft 3 /s on October 16, 2023, and discharge from Harmon Branch at Thorpe, W. Va., was 1.049 ft 3 /s on September 22, 2023, and 1.038 ft 3 /s on October 17, 2023. Discharge in the abandoned underground mine air shaft (USGS site 372224081340901) could not be assessed, but the air shaft drains an abandoned mine that likely contains water stored in approximately 1.7 square miles (mi 2 ) of abandoned underground coal mines in the Pocahontas No. 3 coal seam, and possibly an additional 0.9 mi 2 of leakage from the overlying Pocahontas No. 4 coal seam. Discharge for the six sites measured for the study was measured during a period between September 20 and October 18, 2023, and corresponded to the 12th to the 15th percentile of flow-duration statistics for the Tug Fork downstream of Elkhorn Creek at Welch, W. Va. streamgage (USGS site 03212750). Water-quality data for the seven sites sampled overall were acceptable with respect to drinking water standards. Of the 203 constituents analyzed, only a few failed to meet applicable U.S. Environmental Protection Agency (EPA) drinking water standards. Iron exceeded the 300 micrograms per liter (μg/L) secondary maximum contaminant level (SMCL) at only 1 of the 7 sites (14.3 percent) sampled. Iron concentrations ranged from a minimum of less than (<) 5.00 μg/L to a maximum of 724 μg/L with a median concentration of 7.62 μg/L. Manganese exceeded the 50.0 μg/L SMCL at 2 of the 7 sites (28.6 percent) sampled. Manganese concentrations ranged from a minimum of 1.93 μg/L to a maximum of 271 μg/L with a median concentration of 4.03 μg/L. No sites sampled exceeded the arsenic maximum contaminant level (MCL) of 10 μg/L. Arsenic concentrations ranged from a minimum of <0.100 μg/L to a maximum of 2.35 μg/L with a median arsenic concentration of 0.200 μg/L. None of the seven sites sampled for selenium for this study exceeded the EPA MCL of 50.0 μg/L. Selenium concentrations ranged from a minimum of <0.050 μg/L to a maximum of 5.26 μg/L with a median concentration of 3.21 μg/L. All seven sites were sampled for volatile organic compounds (VOCs), semivolatile organic compounds (SVOCs), and polychlorinated biphenyls (PCBs), but most had concentrations below the detection limit. Of the 10 PCB compounds analyzed for the seven sites sampled, none contained detectable concentrations of PCBs or Aroclor compounds. Of the 44 SVOCs analyzed at each of the seven sites sampled, only 1 SVOC, acenaphthene, was detected, at a concentration of 0.02 μg/L. Of the 96 VOCs analyzed, from each of the seven sites sampled, only two were found at detectable concentrations. Trichloromethane was detected only at 1 of the 7 (14.3 percent) sites sampled at a concentration of 0.027 μg/L, and benzene was detected at the same site and 3 additional sites (4 of the 7 sites or 57.1 percent of the sites sampled) at concentrations of 0.028, 0.029, 0.021, and 0.035 μg/L, but none exceeded the EPA MCL for benzene of 5.00 μg/L. Total coliform bacteria are ubiquitous in the environment, and their presence only suggests the potential for contamination by near-surface processes. Escherichia coli ( E. coli ) bacteria are derived from either human or animal fecal material and can be an indicator of potential contamination by pathogenic bacteria or viruses. Total coliform bacteria were detected at all 7 sites sampled at concentrations ranging from 17.5 to greater than (>) 2,420 most probable number per 100 mL (MPN/100 mL) of sample, with a median total coliform concentration of 1,553 MPN/100 mL. Escherichia coli bacteria were detected at 4 of the 7 sites sampled at concentrations ranging from <1 to 11.9 MPN/100 mL, with a median E. coli concentration of 5.1 MPN/100 mL.

West Virginia↗
USGS2026

Wind River subbasin restoration: Annual report of U.S. Geological Survey activities January 2024 through December 2024

We sampled juvenile wild Oncorhynchus mykiss (Steelhead Trout) in headwater streams of the Wind River, Washington, to characterize population attributes and investigate life-history metrics, particularly migratory patterns, and early life-stage survival. Additionally, this sampling provides an index of abundance of non-native Brook Trout Salvelinus confluentus . We used passive integrated transponder (PIT) tagging and a series of instream PIT-tag interrogation systems (PTISs) to track juveniles and adults. The Wind River subbasin is considered a wild Steelhead refuge by Washington Department of Fish and Wildlife (WDFW). No hatchery Steelhead Trout have been released in the Wind River subbasin since 1997, and hatchery adults are estimated at less than one percent of spawners in most years. Over 25 years of Steelhead Trout status and trend monitoring and research in the subbasin is contributing to understanding of population response to numerous restoration actions in the subbasin, including removal of Hemlock Dam from Trout Creek in 2009, which had an inadequate adult ladder and contributed to increased water temperatures, to near lethal levels for salmonids. Data from our study, and companion work by WDFW, are contributing to the Columbia Basin Fish and Wildlife Program (2009) Research, Monitoring, and Evaluation (RM&E) Strategy of Fish Population Status Monitoring. Specifically, this work addresses the sub-strategies of 1) Assessing the Status and Trends of Diversity of Natural Origin Fish Populations and Uncertainties Research regarding differing life histories of a wild Steelhead Trout population, 2) Assessing the Status and Trend of Adult Natural Origin Fish Populations, and 3) Monitoring and Evaluating the Effectiveness of Tributary Habitat Actions Relative to Environmental, Physical, or Biological Performance Objectives. During summer and fall 2024, we PIT-tagged 2,075 Steelhead Trout parr (age-0 and age-1), in the Trout Creek and upper Wind River watersheds. Age-0 and age-1 parr were at high abundance due to strong spawner numbers in 2023 and 2024 (Estimate of 932 in 2023; and a moderate number of spawners in 2024 though an estimate is not available at this time; 24-year median = 619; Charlie Cochran, WDFW Fish Biologist, personal commun., 2025). An additional 100 parr (age-0 and age-2 or older) were tagged to provide fish for estimating detection efficiencies at PTISs. Steelhead Trout parr were recaptured and detected through repeat headwater sampling, smolt trapping, instream PTISs and Columbia River mainstem PIT-tag detection. We maintained and upgraded six instream PTISs to detect PIT-tagged Steelhead Trout parr, smolts, and adults, providing data for population assessments, and life-cycle research. Detection data from PIT-tagged adult Steelhead Trout at our four primary PTISs allow assessment of adult escapement to tributary watersheds within the Wind River subbasin. Most adult Steelhead detected were tagged by WDFW at an adult trap in the lower Wind River and some as smolts at screw traps. Adult Steelhead Trout detection efficiency estimates at our primary PTIS in Trout Creek have been greater than 99 percent during eight of the past ten years and have exceeded 97% at our primary PTIS in the Wind River during nine of the past ten years. Adult escapement estimates to tributary watersheds are helping evaluate the efficacy of the 2009 removal of Hemlock Dam from rkm 2.0 of Trout Creek. Detections at the instream PTISs have shown trends of age-0 and age-1 Steelhead Trout parr emigration from natal areas during summer and fall, in addition to the expected movement of parr and smolts in spring. Our data suggest that most fish from a cohort that migrate downstream will do so at age-1 for additional rearing in the subbasin. We have estimated that from 15% to 56% of parr tagged as age-0 fish in headwater areas make downstream migrations at age-1 for additional rearing (median = 29%). We have estimated that from 1% to 27% of Steelhead Trout parr, tagged as age-1 fish, make downstream migrations during fall (median = 3.5%): this is especially pronounced in the upper Wind River portion of the watershed (median 10%). These findings raise questions about parr rearing habitat and whether migrations are density- or habitat-quality driven, and answers to such questions are long-term goals of this study as active and passive habitat restoration occurs. Repeat sampling at sites in the subbasin within and between years has enabled assessment of juvenile Steelhead Trout growth patterns. Growth rates (relative change in weight) of age-0 PIT-tagged parr during summer have been similar across the subbasin, though slightly lower in the Trout Creek watershed (Trout Creek sites, 0.57 - 1.25%/day, Wind River sites = 0.94 – 2.48%/day). Summer growth rates have been lower for age-1 parr in the Trout Creek watershed than the upper Wind River watershed (Trout Creek sites, = 0.03 - 0.14%/day, Wind River sites = 0.05 – 0.19%/day). Yearly relative growth was similar across the subbasin for both age-0 and age-1 tagged parr. During 2024 range of mean daily relative change in weight from the previous year for age-0 tagged fish was: Trout Creek sites = 0.96 – 1.41%/day, Wind River sites = 0.80 – 1.30 %/day; and for age1 tagged fish was: Trout Creek sites = 0.37 - 0.50 %/day, Wind River sites = no age-1 tagged recaptures. Non-native Brook Trout are present in the subbasin, chiefly the Trout Creek watershed. Mean percent-of-catch that is Brook Trout, at four sample sites in Trout Creek, has declined from the period 1998 – 2003 to the period 2011 – 2024 (range of decrease = 19 - 82%). Percent-of-catch (of 64 samples, 52 < 10%; 3 > 20%) and number of Brook Trout at the Trout Creek sites from 2011 through 2024, though variable, have generally declined. Habitat restoration evaluation efforts are critical to ensure efficient use of money and resources but require long-term monitoring of population metrics. Detailed viable salmonid population and life-history data, such as that provided by PIT-tagging and instream PTIS networks inform fisheries policy and management and enable assessment of long-term effects of habitat restoration actions such as the removal of Hemlock Dam on Trout Creek and proposed major instream habitat restoration in the upper Wind River.

Washington↗
USGS1998

Methods and guidelines for effective model calibration; with application to UCODE, a computer code for universal inverse modeling, and MODFLOWP, a computer code for inverse modeling with MODFLOW

This report documents methods and guidelines for model calibration using inverse modeling. The inverse modeling and statistical methods discussed are broadly applicable, but are presented as implemented in the computer programs UCODE, a universal inverse code that can be used with any application model, and MODFLOWP, an inverse code limited to one application model. UCODE and MODFLOWP perform inverse modeling, posed as a parameter-estimation problem, by calculating parameter values that minimize a weighted least-squares objective function using nonlinear regression. Minimization is accomplished using a modified Gauss-Newton method, and prior, or direct, information on estimated parameters can be included in the regression. Inverse modeling in many fields is plagued by problems of instability and nonuniqueness, and obtaining useful results depends on (1) defining a tractable inverse problem using simplifications appropriate to the system under investigation and (2) wise use of statistics generated using calculated sensitivities and the match between observed and simulated values, and associated graphical analyses. Fourteen guidelines presented in this work suggest ways of constructing and calibrating models of complex systems such that the resulting model is as accurate and useful as possible.

Water-Resources Investigations Report↗
USGS2024

Current status of the community sensor model standard for the generation of planetary digital terrain models

The creation of accurate elevation models (topography) from stereo images are critical for a large variety of geospatial activities, including the production of digital orthomosaics, change detection, landing site analysis, geologic mapping, rover traverse planning, and spectral analysis. The United Stated Geological Survey, Astrogeology Science Center, continues to transition the supported planetary sensor models to the Community Sensor Model (CSM) standard. This paper describes the current state of use for this photogrammetric standard, supported sensor model types, and qualitatively compares derived topography between SOCET SET and SOCET GXP ( ® BAE Systems) using HiRISE stereo images of Mars. Our transition to the CSM standard will ensure an uninterrupted capability to make these valuable products for Mars and many other extraterrestrial planets and moons.

Remote Sensing↗
USGS2025

Toward a new framework to evaluate process-based model configurations and quantify data worth prior to calibration

Model criticism, discrimination, and selection methods often rely on calibrated model outputs. Because calibration can be computationally expensive, model criticism can first be undertaken by assessing model outputs obtained from limited prior parameter ensembles. However, such prior-based methods are often heuristic and do not formalize the notion of balancing model consistency with data and model complexity (i.e., model adequacy). We present a new framework to discriminate among candidate models prior to calibration that formalizes prior-to-calibration model adequacy into a metric to implicitly balance prior model output data coverage with model complexity represented by prior output (co)variance. The prior model adequacy metric “Mahalanobis distance deviation” quantifies the deviation of (a) the set of squared Mahalanobis distances of data from a prior model output distribution from (b) the set of squared Mahalanobis distances of data from their own distribution. A new data worth metric “discernment value” is also presented which quantifies the value of data for screening less-adequate models prior to calibration. Discernment value is calculated from the change in variance of a weighted average of prior model outputs from all candidate models due to less-adequate model outputs receiving lower weight. The framework is demonstrated using a one-dimensional groundwater flow model with eight possible configurations. A synthetic data network is used to test the framework. Results show the framework identifies the candidate models most similar to the true model used to create the synthetic data. Discernment values show variation in the value of different data types and locations for screening less-adequate models.

Water Resources Research↗
USGS2024

Reference 1D seismic velocity models for volcano monitoring and imaging: Methods, models, and applications

Seismic velocity models of the crust are an integral part of earthquake monitoring systems at volcanoes. 1D models that vary only in depth are typically used for real‐time hypocenter determination and serve as critical reference models for detailed 3D imaging studies and geomechanical modeling. Such models are usually computed using seismic tomographic methods that rely on P ‐ and S ‐wave arrival‐time picks from numerous earthquakes recorded at receivers around the volcano. Traditional linearized tomographic methods that jointly invert for source locations, velocity structure, and station corrections depend critically on having reasonable starting values for the unknown parameters, are susceptible to local misfit minima and divergence, and often do not provide adequate uncertainty information. These issues are often exacerbated by sparse seismic networks, inadequate distributions of seismicity, and/or poor data quality common at volcanoes. In contrast, modern probabilistic global search methods avoid these issues only at the cost of increased computation time. In this article, we review both approaches and present example applications and comparisons at several volcanoes in the United States, including Mount Hood (Oregon), Mount St. Helens (Washington), the Island of Hawai’i, and Mount Cleveland (Alaska). We provide guidance on the proper usage of these methods as relevant to challenges specific to volcano monitoring and imaging. Finally, we survey‐published 1D P ‐wave velocity models from around the world and use them to derive a generic stratovolcano velocity model, which serves as a useful reference model for comparison and when local velocity information is sparse.

Seismological Research Letters↗
USGS2024

Updating the crustal fault model for the 2023 National Seismic Hazard Model for Alaska

We present the crustal fault model for Alaska, based on geologic observations, as a primary input for the 2023 revision of the U.S. Geological Survey National Seismic Hazard Model. We update the 2013 Alaska Quaternary fault and fold database to produce a simplified model of 105 fault sections and four fault zone polygons with basic geologic parameters including slip sense and rate. Significant updates include the following: (1) a slip rate of ∼53 mm/year on the Queen Charlotte Fault indicating it accommodates all of the plate boundary motion; (2) quantified slip rates on megathrust splay faults in the southern Prince William Sound region and near Kodiak Island; (3) improved details of structures in the Chugach-St. Elias orogen; (4) revision of the Castle Mountain Fault from right-lateral slip to a predominantly reverse fault; (5) improved Interior Alaska tectonic models that clarify relationships between the Denali, Totschunda, and thrust faults on both sides of the Alaska Range; (6) identified large earthquake sources in the eastern Brooks Range; and (7) omission of the Chatham Strait section of the Denali Fault. The fault model underscores that the collision of the Yakutat microplate is the dominant driver of active crustal faulting in most of Alaska.

Alaska, Yukon↗
USGS2026

From model to action: Identifying the gaps in coastal marsh models for decision making

Coastal salt marsh modeling projects are designed to answer questions about where salt marshes may migrate, how they can migrate, and how they will be impacted by changing water levels. While this information is vital for climate-resilient marsh conservation, translating these findings into actionable results remains a challenge. The authors examined the actionability of marsh modeling efforts in the United States by analyzing data collected from semi-structured interviews of marsh model users ( n = 24) across two ongoing projects along the U.S. East Coast and the Gulf of America (Gulf of Mexico). By qualitatively analyzing the interview data, the authors found that the tasks of practitioners who use coastal marsh model outputs fall into three major themes: (1) marsh restoration, (2) planning with uncertainty, and (3) conserving habitat for marsh-reliant species. For each of these themes, the authors identify unmet needs, including high spatial resolution information for local planning, accessible descriptions of uncertainty to increase user confidence, and the incorporation of human dimensions data (e.g., human alterations to the landscape such as impoundments and culverts) for a comprehensive understanding of the coastal salt marsh. Marsh modeling projects should strategize how to fulfil these unmet user needs so that marsh modeling outputs can better support decisions related to marsh conservation and restoration.

Gulf of America, United States East Coast↗
USGS2025

A review of post-wildfire adaptations of surface-water-quality models: Synthesis, gaps, and opportunities

As wildfires increasingly affect water-supply watersheds, the demand for models to predict water-quality responses is increasing. This work reviews and synthesizes existing post-wildfire applications of water-quality models in the context of geographic and ecohydrological distribution, hydrologic and water-quality response process representation, model parameterization, model and input data scales, model calibration data availability, as well as calibration and performance evaluation approaches. Emphasis is placed on models that simulate water-quality output, rather than sediment and erosional response as the primary focus. Here, identified gaps and opportunities to advance the post-wildfire application of water-quality models include: 1. applying models in under-represented geographic and ecohydrologic regions, 2. simulating multiple streamflow generation mechanisms, including groundwater, with an emphasis on shifting dominant flow pathways as the landscape recovers following wildfire, 3. adding studies that include the simulation of metals, 4. incorporating more biogeochemical and in-stream processes to model applications, 5. applying finer spatial and temporal resolution of precipitation data input as well as finer spatial resolution hydrologic response units, 6. implementing fully distributed grid or element models or finer resolution response units to capture burn severity heterogeneity, 7. collecting enhanced water-quality data for model calibration and validation, 8. conducting model-intercomparison studies, and 9. developing model parameter value guidance in post-wildfire applications. These identified gaps and opportunities may assist users in deciding on key processes and approaches to consider in modeling post-wildfire water-quality conditions.

Science of the Total Environment↗
USGS2026

The 2025 Puerto Rico and Virgin Islands U.S. National Seismic Hazard Model Update: Ground motion model selection and comparison

We evaluate, select, and describe the ground-motion models (GMMs) used in the 2025 update of the U.S. National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). We identify the most appropriate models that align with GMM selection criteria for use in the PRVI region to improve the accuracy of seismic hazard assessments. The update incorporates globally applicable GMMs suited for the active crustal and subduction earthquakes in the region. We include region-specific adjustments to these GMMs derived from local site response analyses derived from ground motion records. The unadjusted and regionally-corrected GMMs are combined to create a robust model for predicting median ground motion. The model integrates epistemic uncertainty through a median ground motion logic tree that accounts for variations in magnitude and distance. This study compares the GMMs selected for the 2025 PRVI NSHM, including both as-provided and regionally adjusted NGA-West2 and NGA-Subduction models, with those used in the 2003 PRVI NSHM. We evaluate how changes in model selection, weighting, aleatory variability, and epistemic uncertainty influence seismic hazard estimates. Trends with distance, magnitude, and spectral period are analyzed to evaluate how the scaling behavior of the newer GMMs differs from that of earlier models. Relative to the GMMs used in the 2003 NSHM for this region, the 2025 models generally predict lower ground motions. Comparisons with additional GMMs indicate that the adjustments applied for PRVI are consistent with regional-specific modifications developed elsewhere globally. The increase in aleatory variability and epistemic uncertainty in the 2025 update results in a notable increase in hazard levels from these wider uncertainty bounds. These changes can result in as much as a 10%–20% variation in probabilistic ground motion at the 2% in 50 years exceedance level for hazard maps computed across the region for representative site classes and periods.

Puerto Rico, Virgin Islands↗
USGS2025

An inset groundwater-flow model to evaluate the effects of layering configuration on model calibration and assess managed aquifer recharge near Shellmound, Mississippi

The U.S. Geological Survey has developed a high-resolution inset groundwater-flow model in the Mississippi Delta as part of an interdisciplinary collaboration coordinated by the Mississippi Alluvial Plain project to provide a tool that stakeholders can use to support water-resource management decisions. Groundwater withdrawals from the Mississippi River Valley alluvial (MRVA) aquifer have been vital to support agricultural production in the region, but substantial groundwater-level declines near Shellmound, Mississippi, have caused concerns for long-term sustainability of the aquifer. To better understand the subsurface and try to mitigate the long-term groundwater-level declines, stakeholders have undertaken actions including a Groundwater Transfer and Injection Pilot (GTIP) project using a riverbank filtration-based managed aquifer recharge approach. The pilot project consisted of extracting groundwater near the Tallahatchie River and reinjecting it into the aquifer 3 kilometers west where water levels have substantially declined. A high-resolution airborne electromagnetic (AEM) survey was also completed to collect electrical resistivity data to support the GTIP project and the development of the groundwater model. The inset groundwater-flow model was developed to (1) integrate the AEM data into the optimal layering configuration of the MRVA aquifer that the available observation data can support through calibration, and (2) assess the potential effect of the GTIP project on the groundwater levels. The AEM data were processed into three different layering configurations leading to the development of model A (18 layers), model B (16 layers), and model C (8 layers), all at a 100- x 100-meter cell spatial resolution using the U.S. Geological Survey modular finite-difference flow model 6 code with Newton-Raphson formulation. The model development process integrated recent advances in modeling, such as the incorporation of AEM data, the use of outputs from the soil-water-balance (SWB) model, and the Aquaculture and Irrigation Water-Use Model, and was facilitated by robust automation using the open-source python packages Modflow-setup and SFRmaker. Using Parameter Estimation ++ Iterative Ensemble Smoother, the three numerical groundwater-flow models (models A, B, and C) were calibrated against a set of observations, which included aquifer groundwater levels, streamflows, stream stage, and aquifer transmissivity. Results indicate that the detailed representation of MRVA aquifer layers in model A produced the best calibrated model by history matching, and the integration of data representing surficial connectivity played a key role in improving groundwater recharge and enhancing the ability of the model to match groundwater levels in the cone of depression. A forecast model simulated the managed aquifer recharge approach, and the results indicated that, given average irrigation and recharge conditions (2010–15), the GTIP project has the potential to induce groundwater-level increases of as much as 3 meters around the injection site, but a sustained increase would require repetition in subsequent years of water transfer at 2022 rates or above.

Mississippi↗
USGS2024

2024 Crustal Deformation Modeling Workshop report

The 2024 Crustal Deformation Modeling Workshop was held June 10–14 at the Colorado School of Mines. The workshop included two days of tutorials on using PyLith for crustal deformation modeling, followed by three days of science talks and discussions. The workshop focused on four primary themes: ● Constraining long-term fault slip rates and their uncertainties using geodetic and geologic data; ● Earthquake cycle modeling with a focus on constraining models using seismic and geodetic data; ● Interaction of fluids and faulting; and ● Separating contributions of surface loading and tectonic loading in crustal deformation. The complete agenda is available on the CIG website.

Conference Paper↗
USGS2024

Numerical model of the groundwater-flow system near the southeastern part of Puget Sound, Washington

Groundwater flow in the active model area (AMA) was simulated using a groundwater-flow model. A steady-state model version of the model simulates equilibrium conditions, and a transient model version simulates monthly variability. The model corresponds to the physical and temporal dimensions of the conceptual model and groundwater budget. The steady-state model version represents average conditions for an 11-year period (January 1, 2005–December 31, 2015), and the transient model represents monthly hydrologic variability within that period. The 13-layer model was constructed using MODFLOW-NWT with a uniformly spaced grid consisting of 416 rows, 433 columns, and cells with a horizontal dimension of 500 feet (ft) on a side. The model was calibrated to measured values of water levels in wells and lakes and estimated base flow for selected streamflow measurement stations, commonly referred to as streamgages. Model calibration was accomplished using a combination of manual and automatic methods, including the Model-Independent Parameter Estimation (PEST) program that adjusted model input parameters with the aim of minimizing the difference between estimated and model-simulated values of hydraulic head and base flow. Model boundary conditions consist of all simulated groundwater inflow to and outflow from the AMA. For example, a stream reach that simulates a gain from or loss to groundwater is a boundary condition that allows water to exit or enter, respectively, the groundwater system. Other boundary conditions include springs, seeps, precipitation recharge, groundwater exchange with lakes and Puget Sound, and groundwater pumping. A comparison of the estimated groundwater budget to that simulated by the steady-state model version indicates that the relative percentages of total inflow or total outflow for six major categories of boundary conditions are similar for the two budgets. The model was used to simulate three suites of scenarios of potential drought and water-use changes. Scenario 1 suite consisted of the steady-state model version that was run with 0, 15, 20, and 25 percent reduction of precipitation recharge to assess the corresponding reductions in base flow with decreasing recharge. The last simulation for the scenario 1 suite consisted of the transient model version simulating 3 years of consecutive seasonal drought, defined by the months of May through September, to assess the corresponding base-flow reductions. Scenario 2 suite consisted of the steady-state model version with all simulated groundwater use removed, compared with a simulation that includes current groundwater use to evaluate changes to potentiometric surfaces and base flows. Scenario 3 suite consisted of a transient model version of the model that simulated pumping increases for four different categories of water-supply wells (compared to no pumping increases) to evaluate resulting reductions in base flow. Although, these scenarios provide examples of model applications and useful insights, many other scenarios could be simulated. A description of how to download the model is described in the body of this report. Uncertainty is associated with most model inputs. Groundwater levels, lake levels, and land-surface altitudes are relatively certain; other model inputs are far less certain, including precipitation recharge, base flow, hydraulic properties, water use, and the three-dimensional structure of subsurface hydrogeologic units. Models are useful not because of high levels of accuracy of all model inputs, but because they combine the best information and estimates available, thereby providing the best predictions available related to physical processes. The model described in this report simulates groundwater flow on a regional scale, which has inherent limitations for simulating hydrologic scenarios at local scales. Model structures and inputs were generalized to be consistent with this regional scale. For example, the actual groundwater system has much greater heterogeneity of hydraulic conductivity than is possible within the model’s degrees of freedom. Variations in hydraulic gradients over distances less than 500 ft cannot be simulated. The distances between model features, such as a pumping well and a stream, must be placed at 500-ft intervals and are co-located if both features are within the same model cell.

Washington↗
USGS2025

Modeling seawater intrusion along the Alabama coastline using physical and machine learning models to evaluate the effects of multiscale natural and anthropogenic stresses

Seawater intrusion threatens groundwater resources in coastal regions, including southern Baldwin County, Alabama, where the freshwater-saltwater interface dynamics remain poorly understood. To address this gap, this study uses combined physics-based and machine-learning models to quantify seawater intrusion caused by natural (storm surges) and anthropogenic (human activities) perturbations. The long short-term memory network and wavelet analysis were used to assess vertical aquifer vulnerabilities, revealing that the shallow part of the Coastal lowlands aquifer system (CL1) in the southern Baldwin County region is more susceptible to sea level rise and groundwater extraction than deeper aquifers. Based on these findings, a cross-sectional numerical model (physics approach) for the CL1 aquifer was developed to evaluate tidal and storm surge effects, using Tropical Storm Claudette (June 2021) as a case study. Results showed that tidal fluctuations had a minimal impact on the saltwater-freshwater interface location, whereas storm surges caused substantial inland movement, with effects lasting for nine months. The steady-state version of the three-dimensional (3D) physical model predicted seawater intrusion across the entire area, and convolutional neural network-based modeling further validated the model results. The 3D physical model was also applied to a smaller area to assess human impact on the saltwater interface due to two groundwater pumping scenarios (± 50% of the baseline pumping rate). Results revealed that a 50% increase in groundwater withdrawals caused seawater to advance ~ 320 m inland, whereas a 50% reduction led to a ~ 270-meter retreat. This study highlights the vulnerability of Alabama’s shallow coastal aquifers to seawater intrusion due to storm surges and human activities, and demonstrates that combining physics-based models with machine learning approaches can improve groundwater predictions, though its accuracy depends on the availability of site-specific data.

Alabama↗
USGS2024

The 2023 Alaska National Seismic Hazard Model

US Geological Survey (USGS) National Seismic Hazard Models (NSHMs) are used extensively for seismic design regulations in the United States and earthquake scenario development, as well as risk assessment and mitigation for both buildings and infrastructure. This 2023 update of the long-term, time-independent Alaska NSHM includes substantial changes to both the earthquake rupture forecast (ERF) and ground motion models (GMMs). The ERF includes numerous additions to the finite-fault model, considers two deformation models, and introduces updated declustering and smoothing algorithms in the gridded background seismicity model. For the Alaska–Aleutian subduction zone, megathrust earthquakes occur on an updated structural and segmentation model, and the moment magnitude (M) 8+ rupture and rate model include a logic tree branch that considers slip rates derived from geodetic models of interface coupling. The megathrust model considers multiple models of down-dip width, and magnitudes are computed using newly developed scaling relations. For subduction intraslab events and subduction interface events with M < 7, the 2023 update uses a smoothed seismicity model with rupture depths derived from Slab2. The 2023 model updates GMMs in all tectonic settings using the recently published Next Generation Attenuation Subduction (NGA-Sub) GMMs for subduction interface and intraslab events, and the NGA-West2 GMMs for active crustal settings. Collectively, additions and updates to the Alaska NSHM result in hazard increases across most of south-central Alaska relative to the previous model, published in 2007. These changes are primarily due to the adoption of updated rate models for the large-magnitude interface events and the NGA-Sub GMMs that have much higher aleatory variability (sigma), consistent with global observations, and that include models of epistemic uncertainty.

Alaska↗