Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “New Jersey Geological Survey Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
USGS2014

EAARL-B submerged topography: Barnegat Bay, New Jersey, pre-Hurricane Sandy, 2012

These remotely sensed, geographically referenced elevation measurements of lidar-derived submerged topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Barnegat Bay, New Jersey, acquired pre-Hurricane Sandy on October 18, 22, 23, and 26, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New Jersey↗
USGS2007

Concentrations and Loads of Organic Compounds and Trace Elements in Tributaries to Newark and Raritan Bays, New Jersey

A study was undertaken to determine the concentrations and loads of sediment and chemicals delivered to Newark and Raritan Bays by five major tributaries: the Raritan, Passaic, Rahway, Elizabeth, and Hackensack Rivers. This study was initiated by the State of New Jersey as Study I-C of the New Jersey Toxics Reduction Workplan for the New York-New Jersey Harbor, working under the NY-NJ Harbor Estuary Program (HEP) Contaminant Assessment and Reduction Program (CARP). The CARP is a comprehensive effort to evaluate the levels and sources of toxic contaminants to the tributaries and estuarine areas of the NY-NJ Harbor, including Newark and Raritan Bays. The Raritan and Passaic Rivers are large rivers (mean daily discharges of 1,189 and 1,132 cubic feet per second (ft3/s), respectively), that drain large, mixed rural/urban basins. The Elizabeth and Rahway Rivers are small rivers (mean daily discharges of 25.9 and 49.1 ft3/s, respectively) that drain small, highly urbanized and industrialized basins. The Hackensack River drains a small, mixed rural/urban basin, and its flow is highly controlled by an upstream reservoir (mean daily discharge of 90.4 ft3/s). These rivers flow into urbanized estuaries and ultimately, to the Atlantic Ocean. Each of these tributaries were sampled during two to four storm events, and twice each during low-flow discharge conditions. Samples were collected using automated equipment installed at stations adjacent to U.S. Geological Survey streamflow-gaging stations near the heads-of-tide of these rivers. Large-volume (greater than 50 liters of water and a target of 1 gram of sediment), flow-weighted composite samples were collected for chemical analysis using filtration to collect suspended particulates and exchange resin (XAD-2) to sequester dissolved contaminants. Composite whole-water samples were collected for dissolved polycyclic aromatic hydrocarbons (PAH) and for trace element analysis. Additional discrete grab samples were collected throughout each event for trace-element analysis, and multiple samples were collected for suspended sediment (SS), particulate carbon (POC), and dissolved organic carbon (DOC) analysis. The suspended sediment and exchange resin were analyzed for 114 polychlorinated biphenyls (PCBs, by US EPA method 1668A, modified), seven 2,3,7,8-substituted chlorinated dibenzo-p-dioxins (CDD) and 10 dibenzo-p-difurans (CDF) (by US EPA method 1613), 24 PAHs (by low-resolution isotope dilution/mass-spectral methods), 27 organo-chlorine pesticides (OCPs) (by high resolution isotope dilution/mass-spectral methods), and the trace elements mercury (Hg), methyl-mercury (MeHg), lead (Pb), and cadmium (Cd). Isotope dilution methods using gas chromatography and high-and low-resolution mass spectral (GC/MS) detection were used to accurately identify and quantify organic compounds in the sediment and water phases. Trace elements were measured using inductively coupled plasma-mass spectrometry and cold-vapor atomic fluorescence spectrometry methods. The loads of sediment, carbon, and chemicals were calculated for each storm and low-flow event sampled. Because only a few storm events were sampled, yearly loads of sediment were calculated from rating curves developed using historical SS and POC data. The average annual loads of sediment and carbon were calculated for the period 1975-2000, along with the loads for the selected water years being modeled as part of the New York New Jersey Harbor Estuary Program CARP. Comparison of loads calculated using the rating curve method to loads measured during the sampled storm events indicated that the rating curve method likely underpredicts annual loads. Average annual loads of suspended sediment in the tributaries were estimated to be 395,000 kilograms per year (kg/yr) in the Hackensack River, 417,000 kg/yr in the Elizabeth River, 882,000 kg/yr in the Rahway River, 22,700,000 kg/yr in the Passaic River, and 93,100,000 kg/yr in the Raritan River. Averag

Scientific Investigations Report↗
USGS2014

EAARL-B submerged topography: Barnegat Bay, New Jersey, post-Hurricane Sandy, 2012-2013

These remotely sensed, geographically referenced elevation measurements of lidar-derived submerged topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Barnegat Bay, New Jersey, acquired post-Hurricane Sandy on November 1, 5, 16, 20, and 30, 2012; December 5, 6, and 21, 2012; and January 10, 2013. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar system, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map nearshore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site .

New Jersey↗
USGS2010

EAARL Coastal Topography-Sandy Hook Unit, Gateway National Recreation Area, New Jersey, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Sandy Hook Unit of Gateway National Recreation Area in New Jersey, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2017

Application of at-site peak-streamflow frequency analyses for very low annual exceedance probabilities

The U.S. Geological Survey (USGS), in cooperation with the U.S. Nuclear Regulatory Commission, has investigated statistical methods for probabilistic flood hazard assessment to provide guidance on very low annual exceedance probability (AEP) estimation of peak-streamflow frequency and the quantification of corresponding uncertainties using streamgage-specific data. The term “very low AEP” implies exceptionally rare events defined as those having AEPs less than about 0.001 (or 1 × 10 –3 in scientific notation or for brevity 10 –3 ). Such low AEPs are of great interest to those involved with peak-streamflow frequency analyses for critical infrastructure, such as nuclear power plants. Flood frequency analyses at streamgages are most commonly based on annual instantaneous peak streamflow data and a probability distribution fit to these data. The fitted distribution provides a means to extrapolate to very low AEPs. Within the United States, the Pearson type III probability distribution, when fit to the base-10 logarithms of streamflow, is widely used, but other distribution choices exist. The USGS-PeakFQ software, implementing the Pearson type III within the Federal agency guidelines of Bulletin 17B (method of moments) and updates to the expected moments algorithm (EMA), was specially adapted for an “Extended Output” user option to provide estimates at selected AEPs from 10 –3 to 10 –6 . Parameter estimation methods, in addition to product moments and EMA, include L-moments, maximum likelihood, and maximum product of spacings (maximum spacing estimation). This study comprehensively investigates multiple distributions and parameter estimation methods for two USGS streamgages (01400500 Raritan River at Manville, New Jersey, and 01638500 Potomac River at Point of Rocks, Maryland). The results of this study specifically involve the four methods for parameter estimation and up to nine probability distributions, including the generalized extreme value, generalized log-normal, generalized Pareto, and Weibull. Uncertainties in streamflow estimates for corresponding AEP are depicted and quantified as two primary forms: quantile (aleatoric [random sampling] uncertainty) and distribution-choice (epistemic [model] uncertainty). Sampling uncertainties of a given distribution are relatively straightforward to compute from analytical or Monte Carlo-based approaches. Distribution-choice uncertainty stems from choices of potentially applicable probability distributions for which divergence among the choices increases as AEP decreases. Conventional goodness-of-fit statistics, such as Cramér-von Mises, and L-moment ratio diagrams are demonstrated in order to hone distribution choice. The results generally show that distribution choice uncertainty is larger than sampling uncertainty for very low AEP values.

Scientific Investigations Report↗
USGS2021

Distribution of chlorinated volatile organic compounds and per- and polyfluoroalkyl substances in monitoring wells at the former Naval Air Warfare Center, West Trenton, New Jersey, 2014–17

A study was conducted by the U.S. Geological Survey in cooperation with the U.S. Navy (the Navy) to determine the status of volatile organic compounds (VOCs) and per- and polyfluoroalkyl substances (PFASs) in groundwater at the former Naval Air Warfare Center (NAWC) in West Trenton, New Jersey. Wells contaminated with VOCs were sampled in 2014, 2015, 2016, and 2017 as part of the Navy’s long-term monitoring program. The results for trichloroethene (TCE), cis-1,2-dichloroethene (cisDCE), and vinyl chloride (VC) were plotted in map view to determine whether the areal extent of the contamination had changed over the 4-year period. TCE, cisDCE, and VC concentrations were plotted along nine lines of section across the former NAWC site to determine whether the vertical distribution of VOCs had changed during 2014–17. TCE, cisDCE, and VC concentrations over time were plotted on graphs for each well to determine long-term trends and changes in VOC concentrations. Data from 1990 to 2017 were used, if available, to make these graphs. Results show that the areas of VOC concentrations greater than or equal to 1 microgram per liter decreased slightly on the northwestern side and the northeastern side of the NAWC site from 2014 to 2017 under the influence of a pump-and-treat system, natural attenuation processes, and engineered bioaugmentation experiments ongoing at the site. The pump-and-treat system continued to hydraulically contain the VOC contamination and kept it from moving offsite to the south and west of NAWC. One well northeast of the NAWC site, 50BR, was found to have detectable TCE and cisDCE concentrations. These detections indicated that VOC contamination had migrated offsite and that the pump-and-treat system was not containing the VOC contamination on the eastern side of the facility. Detectable VOC concentrations were present in wells as deep as 200 and 221 feet on the eastern and western sides of the NAWC site. TCE concentrations in most wells were found to be stable or to have slowly decreased since the facility closed in 1999. Only 7 wells, including 3 pump-and-treat extraction wells, showed substantial increases in TCE concentration from 2014 to 2017. Continuing sources of TCE to the system are desorption of TCE from organic materials in the aquifer, back diffusion of TCE from the contaminated bedrock matrix, and dissolution of remaining dense nonaqueous phase TCE in the aquifer. Wells at the former NAWC site were sampled for PFASs in 2015, 2016, and 2017. Perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and perfluorononanoic acid (PFNA) results were plotted in map and cross-section views to determine the areal and vertical extent of the PFAS contamination at the site. PFOS, PFOA, and PFNA concentrations greater than their established maximum contaminant levels were detected in 25, 24, and 21 of the 26 wells sampled, respectively, on the eastern side of NAWC in 2017. Vertically, the highest PFAS concentrations were present in shallow wells along the fence near the firehouse and along the railroad tracks where the aqueous film-forming foam discharge reportedly occurred back in 1990. PFAS concentrations were detected in one well (54BR) as deep as 200 feet on the eastern side of the NAWC site. PFASs were present in wells east of the railroad tracks, indicating that PFAS-contaminated groundwater had moved offsite. In a limited test of five wells, samples collected with regenerated cellulose dialysis membrane (RCDM) passive samplers contained PFAS concentrations equal to those in samples from low-flow purging.

New Jersey↗
USGS2012

Variations in statewide water quality of New Jersey streams, water years 1998-2009

Statistical analyses were conducted for six water-quality constituents measured at 371 surface-water-quality stations during water years 1998-2009 to determine changes in concentrations over time. This study examined year-round concentrations of total dissolved solids, dissolved nitrite plus nitrate, dissolved phosphorus, total phosphorus, and total nitrogen; concentrations of dissolved chloride were measured only from January to March. All the water-quality data analyzed were collected by the New Jersey Department of Environmental Protection and the U.S. Geological Survey as part of the cooperative Ambient Surface-Water-Quality Monitoring Network. Stations were divided into groups according to the 1-year or 2-year period that the stations were part of the Ambient Surface-Water-Quality Monitoring Network. Data were obtained from the eight groups of Statewide Status stations for water years 1998, 1999, 2000, 2001-02, 2003-04, 2005-06, 2007-08, and 2009. The data from each group were compared to the data from each of the other groups and to baseline data obtained from Background stations unaffected by human activity that were sampled during the same time periods. The Kruskal-Wallis test was used to determine whether median concentrations of a selected water-quality constituent measured in a particular 1-year or 2-year group were different from those measured in other 1-year or 2-year groups. If the median concentrations were found to differ among years or groups of years, then Tukey's multiple comparison test on ranks was used to identify those years with different or equal concentrations of water-quality constituents. A significance level of 0.05 was selected to indicate significant changes in median concentrations of water-quality constituents. More variations in the median concentrations of water-quality constituents were observed at Statewide Status stations (randomly chosen stations scattered throughout the State of New Jersey) than at Background stations (control stations that are located on reaches of streams relatively unaffected by human activity) during water years 1998-2009. Results of tests on concentrations of total dissolved solids, dissolved chloride, dissolved nitrite plus nitrate, total phosphorus, and total nitrogen indicate a significant difference in water quality at Statewide Status stations but not at Background stations during the study period. Excluding water year 2009, all significant changes that were observed in the median concentrations were ultimately increases, except for total phosphorus, which varied significantly but in an inconsistent pattern during water years 1998-2009. Streamflow data aided in the interpretation of the results for this study. Extreme values of water-quality constituents generally followed inverse patterns of streamflow. Low streamflow conditions helped explain elevated concentrations of several constituents during water years 2001-02. During extreme drought conditions in 2002, maximum concentrations occurred for four of the six water-quality constituents examined in this study at Statewide Status stations (maximum concentration of 4,190 milligrams per liter of total dissolved solids) and three of six constituents at Background stations (maximum concentration of 179 milligrams per liter of total dissolved solids). The changes in water quality observed in this study parallel many of the findings from previous studies of trends in New Jersey.

New Jersey↗
USGS2023

Simulation of flow and eutrophication in the central Salem River, New Jersey

The central Salem River in New Jersey is subject to periods of water-quality impairment, marked by elevated concentrations of phosphorus and chlorophyll- a , and low concentrations of and large diurnal swings in concentrations of dissolved oxygen. These seasonal eutrophic conditions are controlling factors for water quality in lower reaches, where the river is more lacustrine than in upper reaches, as a result of downstream damming. This biological productivity is supported by nutrient wash-off from agricultural areas in the surrounding watershed. To investigate this impairment, flow measurement and water-quality sampling were conducted during 2007–08 in support of development of a one-dimensional surface-water-quality model that simulates nutrient cycling and transformation processes. The U.S. Geological Survey, in cooperation with the New Jersey Department of Environmental Protection, used the U.S. Environmental Protection Agency Water Quality Analysis Simulation Program (WASP) to develop a receiving-water-quality model of the central Salem River between Woodstown and Deepwater, New Jersey, from April 2007 to October 2008. The main-stem river and largest tributary were simulated. In the flow model, kinematic wave flow is used to simulate flow in upper reaches and ponded weir flow is used to simulate flow in lower reaches. The water-quality model makes use of a mass-balance equation to simulate the fate and transport of nutrients, phytoplankton chlorophyll- a , dissolved oxygen, and oxygen demands (an indicator rather than a substance) in the river. Model input included channel characteristics, boundary conditions for flow and water quality, environmental parameters, vertical dispersion coefficients, settling rates, and kinetic constants. Inputs were estimated where field data were lacking, notably for tributary flows and nutrient loads. The model was calibrated to observed flow variables and concentrations of dissolved oxygen, chlorophyll- a , and nutrients at sampling locations, with emphasis on growing-season conditions. Calibration was achieved through graphical and statistical comparison of simulated results to observed data. Sensitivity analyses were performed, and model limitations and applicability were evaluated. Simulated results closely matched observed data in most cases, although some were overpredicted slightly. The most important causes of overprediction were estimated tributary flows for the flow model and estimated tributary watershed loads for the water-quality model. Calibration of dissolved-oxygen concentrations was closer, and predicted diurnal variations were consistent with high algal photosynthesis/respiration, although lack of continuous dissolved-oxygen data precluded verifying these predictions. A similar caveat applies to predicted diurnal variations in chlorophyll- a . Simulated limitations on algal growth were consistent with those based on observed data and indicated phosphorus was the main limiting nutrient, except during certain periods when nitrogen was limiting. Two water-quality management scenarios were simulated with the model to assess the effect of point- and nonpoint-source nutrient reductions on water-quality conditions in the river. Scenarios involved (1) a return of watershed land use to predevelopment natural conditions and (2) an extreme reduction in nutrient input. Although the extreme-nutrient-reduction scenario yielded improvements in water quality, the natural-conditions scenario yielded the largest improvements as indicated by minimal violations of surface-water-quality standards or thresholds. However, years may be needed to attain the full benefit of these management scenarios as a result of accumulation of phosphorus and organic carbon in riverbed sediments in lacustrine reaches. The results of this study indicate that the quality of water in the central Salem River will improve if management policies that mitigate the effects of nutrient-loading practices in the watershed, particularly those related to agriculture, are implemented.

New Jersey↗
USGS2008

Recovery of Ground-Water Levels From 1988 to 2003 and Analysis of Potential Water-Supply Management Options in Critical Area 1, East-Central New Jersey

Water levels in four confined aquifers in the New Jersey Coastal Plain within Water Supply Critical Area 1 have recovered as a result of reductions in ground-water withdrawals initiated by the State in the late 1980s. The aquifers are the Wenonah-Mount Laurel, the Upper and Middle Potomac-Raritan-Magothy, and Englishtown aquifer system. Because of increased water demand due to increased development in Monmouth, Ocean, and Middlesex Counties, five base and nine alternate management models were designed for the four aquifers to evaluate the effects resulting from potential reallocation of part of the Critical Area 1 reductions in withdrawals. The change in withdrawals and associated water-level changes in the aquifers for 1988-2003 are discussed. Generally, withdrawals decreased 25 to 30 Mgal/d (million gallons per day), and water levels increased 0 to 80 ft (feet). The Regional Aquifer-System Analysis (RASA) ground-water-flow model of the New Jersey Coastal Plain developed by the U.S. Geological Survey was used to simulate ground-water flow and optimize withdrawals using the Ground-Water Management Process (GWM) for MODFLOW. Results of the model were used to evaluate the effects of several possible water-supply management options in order to provide the information to water managers. The optimization method, which provides a means to set constraints that support mandated hydrologic conditions, then determine the maximum withdrawals that meet the constraints, is a more cost-effective approach than simulating a range of withdrawals to determine the effects on the aquifer system. The optimization method is particularly beneficial for a regional-scale study of this kind because of the large number of wells to be evaluated. Before the model was run, a buffer analysis was done to define an area with no additional withdrawals that minimizes changes in simulated streamflow in aquifer outcrop areas and simulated movement of ground water toward the wells from areas of possible high chloride concentrations in the northern and southern parts of the Critical Area. Five base water-supply management models were developed. Each management model has an objective function, decision variables, and constraints. Two of the five management models were test cases: clean slate option and reallocation from the Wenonah-Mount Laurel aquifer and Englishtown aquifer system to small volume wells for potable water use. Nine other models also were developed as part of a trade-off analysis between withdrawal amounts and constraint values. The 14 management models included current (2003) or regularly spaced well locations with variations on the constraints of ground-water head, drawdown, velocity at the 250-mg/L (milligram per liter) isochlor, and withdrawal rate. Results of each management model were evaluated in terms of withdrawals, heads, saltwater intrusion, and source of water by aquifer. Each trade-off curve was defined by using six to nine separate management model runs. Results of the management models designed in this study indicate that a withdrawal reallocation of 5 to 20 Mgal/d within Critical Area 1 would increase the area of heads below -30 ft and the velocity at the 250-mg/L isochlor by up to 4 times that of the simulated 2003 results; the range of values are 0 to 521 square miles and 1 to 20 feet per year, respectively. The increase in area of heads below -30 ft was larger in the Middle Potomac-Raritan-Magothy aquifer than in other aquifers because that area was negligible in 2003. The range of modeled withdrawals is closely tied to management-model design. Interpretation of management model results is provided as well as a discussion of limitations.

Scientific Investigations Report↗
USGS2026

Analysis of alternative weir designs for improved passage of select fish at the U.S. Geological Survey streamgaging weir at Blackwells Mills, New Jersey

As the population of New Jersey continues to remain dense, the need for water supply will likely continue to be high, which can lead to water managers needing to make difficult decisions about managing drinking-water supply. Streamgaging weirs like the ones used by the U.S. Geological Survey (USGS) play a critical role in providing accurate and stable streamflow data, but their presence can affect the passage of diadromous fish species such as river herring ( Alosa pseudoharengus [alewife], Alosa aestivalis [blueback herring], and Alosa sapidissima [American shad]). In some situations, weirs existing in rivers and streams are no longer used because they were part of a farm irrigation system or some type of industrial operation. The weir at the USGS streamgage 01402000 Millstone River at Blackwells Mills, New Jersey, was purposefully built as a hydraulic-control structure that provides a precise and stable control for the measurement of stage and computation of continuous streamflow. To satisfy the dual need of maintaining accurate streamflow data and providing improved fish passage for select species of fish during migration season, the USGS proposed the development and evaluation of two alternative weir designs that would meet the criteria established for successful passage of American shad, alewife, and blueback herring during their yearly migration. The designs were also required to maintain adequate control of the upstream pool elevation necessary for the precise computation of streamflow used by State agencies for municipal water-supply purposes for surrounding communities. Two alternative weir design modifications were incorporated at the center of the Blackwells Mills weir and modeled using two-dimensional hydraulic modeling software and three-dimensional computational fluid-dynamics software to simultaneously evaluate conditions for passage of the target fish species and effects to streamflow computations at the streamgage. The models were calibrated to existing conditions around the weir location using surveyed-elevation data and recorded stage, streamflow, and velocity in the Millstone River. The alternative weir designs lowered the weir crest by 1.02 feet (ft) and the resulting simulations showed an effective increase in depth of 0.98 ft at the median streamflow of 251 cubic feet per second (ft 3 /s) and 0.96 ft at the 95-percent exceedance streamflow of 98 ft 3 /s. The alternative weir designs were also found to increase streamflow depth across the shallowest portions of the weir structure at the downstream anti-scour skirt by lowering the skirt about 4 inches, allowing for two or more body depths of water for American shad, alewife, and blueback herring at the median migration streamflow of 251 ft 3 /s. The alternative weir designs also reduced the highest stream velocities across the downstream weir sill and anti-scour skirt from about 9 to 10 feet per second, and the depth-averaged velocity to about 7 to 8 feet per second. The sensitivity of the weir with respect to the computation of streamflow was increased from about 1.8 cubic feet per second per hundredth foot to 1.6 cubic feet per second per hundredth foot for streamflows of about 10–100 cubic feet per second.

New Jersey↗
USGS2007

Summary of selected U.S. Geological survey data on domestic well water quality for the Centers for Disease Control's National Environmental Public Health Tracking Program

About 10 to 30 percent of the population in most States uses domestic (private) water supply. In many States, the total number of people served by domestic supplies can be in the millions. The water quality of domestic supplies is inconsistently regulated and generally not well characterized. The U.S. Geological Survey (USGS) has two water-quality data sets in the National Water Information System (NWIS) database that can be used to help define the water quality of domestic-water supplies: (1) data from the National Water-Quality Assessment (NAWQA) Program, and (2) USGS State data. Data from domestic wells from the NAWQA Program were collected to meet one of the Program's objectives, which was to define the water quality of major aquifers in the United States. These domestic wells were located primarily in rural areas. Water-quality conditions in these major aquifers as defined by the NAWQA data can be compared because of the consistency of the NAWQA sampling design, sampling protocols, and water-quality analyses. The NWIS database is a repository of USGS water data collected for a variety of projects; consequently, project objectives and analytical methods vary. This variability can bias statistical summaries of contaminant occurrence and concentrations; nevertheless, these data can be used to define the geographic distribution of contaminants. Maps created using NAWQA and USGS State data in NWIS can show geographic areas where contaminant concentrations may be of potential human-health concern by showing concentrations relative to human-health water-quality benchmarks. On the basis of national summaries of detection frequencies and concentrations relative to U.S. Environmental Protection Agency (USEPA) human-health benchmarks for trace elements, pesticides, and volatile organic compounds, 28 water-quality constituents were identified as contaminants of potential human-health concern. From this list, 11 contaminants were selected for summarization of water-quality data in 16 States (grantee States) that were funded by the Environmental Public Health Tracking (EPHT) Program of the Centers for Disease Control and Prevention (CDC). Only data from domestic-water supplies were used in this summary because samples from these wells are most relevant to human exposure for the targeted population. Using NAWQA data, the concentrations of the 11 contaminants were compared to USEPA human-health benchmarks. Using NAWQA and USGS State data in NWIS, the geographic distribution of the contaminants were mapped for the 16 grantee States. Radon, arsenic, manganese, nitrate, strontium, and uranium had the largest percentages of samples with concentrations greater than their human-health benchmarks. In contrast, organic compounds (pesticides and volatile organic compounds) had the lowest percentages of samples with concentrations greater than human-health benchmarks. Results of data retrievals and spatial analysis were compiled for each of the 16 States and are presented in State summaries for each State. Example summary tables, graphs, and maps based on USGS data for New Jersey are presented to illustrate how USGS water-quality and associated ancillary geospatial data can be used by the CDC to address goals and objectives of the EPHT Program.

Scientific Investigations Report↗
USGS2010

Simulation of Runoff and Reservoir Inflow for Use in a Flood-Analysis Model for the Delaware River, Pennsylvania, New Jersey, and New York, 2004-2006

A model was developed to simulate inflow to reservoirs and watershed runoff to streams during three high-flow events between September 2004 and June 2006 for the main-stem subbasin of the Delaware River draining to Trenton, N.J. The model software is a modified version of the U.S. Geological Survey (USGS) Precipitation-Runoff Modeling System (PRMS), a modular, physically based, distributed-parameter modeling system developed to evaluate the impacts of various combinations of precipitation, climate, and land use on surface-water runoff and general basin hydrology. The PRMS model simulates time periods associated with main-stem flooding that occurred in September 2004, April 2005, and June 2006 and uses both daily and hourly time steps. Output from the PRMS model was formatted for use as inflows to a separately documented reservoir and riverrouting model, the HEC-ResSim model, developed by the U.S. Army Corps of Engineers Hydrologic Engineering Center to evaluate flooding. The models were integrated through a graphical user interface. The study area is the 6,780 square-mile watershed of the Delaware River in the states of Pennsylvania, New Jersey, and New York that drains to Trenton, N.J. A geospatial database was created for use with a geographic information system to assist model discretization, determine land-surface characterization, and estimate model parameters. The USGS National Elevation Dataset at 100-meter resolution, a Digital Elevation Model (DEM), was used for model discretization into streams and hydrologic response units. In addition, geospatial processing was used to estimate initial model parameters from the DEM and other data layers, including land use. The model discretization represents the study area using 869 hydrologic response units and 452 stream segments. The model climate data for point stations were obtained from multiple sources. These sources included daily data for 22 National Weather Service (NWS) Cooperative Climate Station network stations, hourly data for 15 stations from the National Climatic Data Center, hourly data for 1 station from the NWS Middle Atlantic River Forecast Center records, and daily and hourly data for 7 stations operated by the New York City Department of Environmental Protection. The NWS Multisensor Precipitation Estimate data set for 2001-2007 was used for computing daily precipitation for the model and for computing hourly precipitation for storm simulation periods. Calibration of the PRMS model included regression and optimization algorithms, as well as manual adjustments of model parameters. The general goal of the calibration procedure was to minimize the difference between discharge measured at USGS streamgages and the corresponding discharge simulated by the model. Daily streamflow data from 35 USGS streamgages were used in model calibration. The streamflow data represent areas draining from 20.2 to 6,780 square miles. The PRMS model simulates reservoir inflow and watershed runoff for use as input into HECResSim for the purpose of evaluating and comparing the effects of different watershed conditions on main-stem flooding in the Delaware River watershed draining to Trenton, N.J. The PRMS model is useful as a planning tool to simulate the effects of land-use changes and different antecedent conditions on local runoff and reservoir inflow and, as input to the HEC-ResSim model, on flood flows in the main stem of the Delaware River.

Open-File Report↗
USGS2021

Simulated effects of sea-level rise on the shallow, fresh groundwater system of Assateague Island, Maryland and Virginia

The U.S. Geological Survey, in cooperation with the National Park Service, developed a three-dimensional groundwater-flow model for Assateague Island in eastern Maryland and Virginia to assess the effects of sea-level rise on the groundwater system. Sea-level rise is expected to increase the altitude of the water table in barrier island aquifer systems, possibly leading to adverse effects to ecosystems on the barrier islands. The potential effects of sea-level rise were evaluated by simulating groundwater conditions under sea-level-rise scenarios of 20 centimeters (cm), 40 cm, and 60 cm. Results show that as sea level rises, low-lying areas of the island originally represented as receiving freshwater recharge in the baseline scenario are inundated by saltwater. This change from freshwater recharge to saltwater decreases the overall amount of freshwater recharging the system. As the water table rises in response to the higher sea levels, freshwater flow out of the system changes, with more freshwater leaving as submarine groundwater discharge and less freshwater leaving as seeps and evapotranspiration. At the current land-surface altitude, as much as 50 percent of the island may be inundated with a 60-cm rise in sea level, and the low-lying marshes may change from freshwater to saltwater. Groundwater levels at 32 wells were monitored for as long as 12 months between October 2014 and September 2015 on Assateague Island. Results from objective classification analysis of 14 shallow monitoring wells show two dominant processes affecting groundwater levels in two different settings on the island. On the western side of the island, between the primary dune and the inland bays, water levels clearly respond to precipitation events. This side of the island is more protected from ocean tides and typically is more vegetated than the eastern side. On the eastern side of the island, between the Atlantic Ocean and the primary dune, water levels clearly respond to tidal events. Specific conductance was measured at four wells, two on the western part of the island and two on the eastern part of the island. Specific conductance values in the two wells west of the primary dune show episodic decreases, coinciding with precipitation events. Specific conductance values in the two wells on the eastern side of the primary dune show episodic increases, coinciding with high-tide events. These high frequency monitoring data are intended to aid in designing a monitoring network that can document both short-term and long-term hydrologic processes on Assateague Island National Seashore. This study uses a modeling approach consistent with models developed for Gateway National Recreation Area, Sandy Hook Unit (New Jersey) and Fire Island National Seashore (New York). Combined, these models are meant to improve the regional capabilities for predicting climate-change effects on barrier islands and provide resource managers with a common set of tools for adaptation and mitigation of potentially adverse effects of sea-level rise.

Maryland, Virginia↗
USGS2018

An initial comparison of pesticides and amphibian pathogens between natural and created wetlands in the New Jersey Pinelands, 2014–16

A study conducted by the U.S. Geological Survey, in cooperation with the New Jersey Pinelands Commission and Montclair State University, was designed to compare pesticide concentrations and the presence and prevalence of amphibian pathogens between natural ponds and two types of created wetlands, excavated ponds and stormwater basins, throughout the New Jersey Pinelands. The study described herein is part of a larger study by the New Jersey Pinelands Commission designed to compare the functional equivalency of natural and created wetlands throughout the New Jersey Pinelands. Sites were selected on the basis of land-use classifications within a 500-meter radius around each wetland from a pool of natural ponds, excavated ponds, and stormwater basins determined by the New Jersey Pinelands Commission. Water, bed-sediment, anuran-food, and composite larval-anuran-tissue samples were collected from four reference (minimum land-use effects) and four degraded (maximum land-use effects) sites from each wetland type for a total of 24 ponds or basins throughout the New Jersey Pinelands during 2014–16. Prevalence of Ranavirus was determined on the basis of tail clips collected from 60 individual larval anurans in each wetland, and 10 animals from each wetland also were swabbed for the presence of Batrachochytrium dendrobatidis (Bd). Other constituents measured included turbidity, pH, specific conductance, dissolved oxygen, dissolved organic carbon, percent organic carbon in sediment, and composite larval-anuran lipid content. The amount of altered land (percent agricultural plus percent developed) ranged from 0 to 62.4 percent for the natural ponds, 0 to 63.6 percent for the excavated ponds, and 23.3 to 80.2 percent for the stormwater basins. The herbicides atrazine and metolachlor were observed in 60 and 89 percent of the water samples, respectively. The insecticide bifenthrin was the most frequently detected current-use pesticide (greater than 25 percent of the samples) in bed-sediment, anuran-food, and composite larval-anuran-tissue samples. The legacy insecticide p,p' -DDT and its primary degradates p,p' -DDD and p,p' -DDE were the most frequently detected compounds in bed-sediment and anuran-food samples (32–76 percent in sediment samples and 24–72 percent in anuran-food samples). Significantly, greater numbers of pesticides and higher total pesticide concentrations were observed in stormwater basins than in natural and excavated ponds. Reference wetlands had fewer pesticides and lower total pesticide concentrations compared to degraded wetlands, indicating a positive relation between percent altered land and pesticides throughout the New Jersey Pinelands. Ranavirus was observed in larvae from 4 wetlands, including 1 reference natural pond, 1 degraded natural pond, and 2 degraded stormwater basins, with prevalence ranging from 3 to 43 percent. Bd was detected in swabs from 18 animals and in 4 natural ponds (1 reference and 3 degraded), 3 excavated ponds (all reference), and 2 stormwater basins (1 reference and 1 degraded); however, detection probability was low. In the wetlands with Bd detections, between 10 and 30 percent (between 1 and 3) of the animal’s swabbed tested positive for Bd. Owing to the limited number of positive detections for both Bd and Ranavirus , no statistical comparisons between wetland types and land-use classifications were possible.

New Jersey↗
USGS2023

Moderate flood level scenarios—Synthetic storm-driven flood-inundation maps for coastal communities in 10 New Jersey counties

The U.S. Geological Survey (USGS), in cooperation with the New Jersey Department of Environmental Protection (NJDEP) and the New Jersey Office of Emergency Management (NJOEM), created digital flood-inundation maps for approximately 1,430 square miles of the New Jersey coast and tidewaters through 10 coastal counties stretching from Cumberland County through Bergen County, New Jersey. The maps depict extent and depth estimates of coastal flooding corresponding to selected tidal elevations recorded by 25 real-time USGS tide gages located within the study area. The flood-inundation maps can be accessed through the USGS Interagency Flood Risk Management (InFRM) Flood Decision Support Toolbox (FDST). Previously published modeled data were utilized from the coupled ADvanced CIRCulation Model (ADCIRC) and Simulating Waves Nearshore (SWAN) model. Simulated tropical storm events were selected based on parameters including landfall location or closest approach location, maximum wind speed, central pressure, and radii of winds. Two storm events were selected per tide gage providing two “scenarios” and accompanying inundation-map libraries for each gage. Flood-inundation maps reflect between 9 to 30 stages (elevations) at each tide gage that correspond to areal extents and depths for ADCIRC-SWAN storm time steps extracted from modeled hydrographs at the gage locations. Water-surface elevations from ADCIRC-SWAN node points extending through each tide gage station extent were used to interpolate a water surface. Combining these surfaces with a geographic information system (GIS) topobathymetric digital elevation model (TBDEM) delineated the area flooded by coastal waters at each tide gage elevation. The availability of these maps to visualize potential inundation for selected water levels along with real-time water level data available online from USGS tide gages, coastal impact statements, and forecasted tide elevations from the National Weather Service (NWS) will provide emergency management personnel and residents with a link between numeric and text warning information and images of estimated inundation extents in their community. User selected display of inundation allows early response activities to NWS forecasted water level elevations or mitigation planning by selecting targeted water levels and planning critical pre-flood activities such as building elevations, early traffic pattern changes because of neighborhood building inundation levels, improved understanding about when major road access is affected, as well as for post-flood recovery efforts. A subsequent analysis of several community metrics including total structures, structure density, percent of buildings inundated, and roads and bridges affected by flooding was used to evaluate moderate flooding impacts among the mapped station extents. Initial comparisons are presented to show the variability of these characteristics within each mapped station extent then extended to evaluate impacts from moderate flooding on these same areas. The analysis used simulated inundation layers at the moderate flood stage to investigate the magnitude of inundation on building structures and major roads among the mapped station extents. Experimental equations were developed to begin testing if a mathematical equation could help identify communities that were disproportionately impacted at moderate flood stage. The community analysis of impacts to moderate flooding based on these inundation scenario maps should provide community leaders and local and state planning officials with tools to better visualize and understand how flooding begins to disrupt and damage building structures and major roads as a surrogate for direct increased risk to human life and property.

New Jersey↗
USGS2017

Morphologic evolution of the wilderness area breach at Fire Island, New York—2012–15

Introduction Hurricane Sandy, which made landfall on October 29, 2012, near Atlantic City, New Jersey, had a significant impact on the coastal system along the south shore of Long Island, New York. A record significant wave height of 9.6 meters (m) was measured at wave buoy 44025 , approximately 48 kilometers offshore of Fire Island, New York. Surge and runup during the storm resulted in extensive beach and dune erosion and breaching of the Fire Island barrier island system at two locations, including a breach that formed within the Otis Pike Fire Island High Dune Wilderness area on the eastern side of Fire Island. The U.S. Geological Survey (USGS) has a long history of conducting morphologic change and processes research at Fire Island. One of the primary objectives of the current research effort is to understand the morphologic evolution of the barrier system on a variety of time scales (from storm scale to decade(s) to century). A number of studies that support the project objectives have been published. Prior to Hurricane Sandy, however, little information was available on specific storm-driven change in this region. The USGS received Hurricane Sandy supplemental funding (project GS2–2B: Linking Coastal Processes and Vulnerability, Fire Island, New York, Regional Study) to enhance existing research efforts at Fire Island. The existing research was greatly expanded to include inner continental shelf mapping and investigations of processes of inner shelf sediment transport; beach and dune response and recovery; and observation, analysis, and modeling of the newly formed breach in the Otis Pike High Dune Wilderness area, herein referred to as the wilderness breach. The breach formed at the site of Old Inlet, which was open from 1763 to 1825. The location of the initial island breaching does not directly correspond with topographic lows of the dunes, but instead the breach formed in the location of a cross-island boardwalk that was destroyed during Hurricane Sandy. From 2013 to November 2015, bathymetric data were collected by the USGS St. Petersburg Coastal and Marine Science Center during three surveys of the breach channel and tidal shoals, and shoreline positions on each side of the breach (also collected by the National Park Service). Additionally, pre-storm topography/bathymetry EAARL–B light detection and ranging (lidar) data were collected by the USGS the day prior to Hurricane Sandy’s landfall. These data serve as a baseline for change analyses during four subsequent periods: June 2013, June 2014, October 2014, and May 2015. The June 2013 single-beam bathymetry data were collected in collaboration with the U.S. Army Corps of Engineers (USACE), using the Lighter Amphibious Resupply Cargo (LARC) vessel, and included the ebb shoal and breach channel. The USGS collected and processed the three additional bathymetric datasets using personal watercraft equipped with single-beam echo sounders and backpack Global Positioning System (GPS) over shallow flood shoals. Eastern and western breach shorelines were surveyed weekly to monthly beginning on November 6, 2012 (by the National Park Service [NPS], and USGS St. Petersburg Coastal and Marine Science Center), with measurements made every few weeks for the first year and every few months after October 2013. The NPS and researchers from Stony Brook University monitored the breach by collecting field data of the breach channel bathymetry, conducting aerial photographic overflights, and performing water-quality analyses (see http://po.msrc.sunysb.edu/GSB/ ). The aerial photography collected and rectified by Stony Brook University is used extensively in our morphologic change description to examine changes to breach shorelines (supplementing shoreline data collected in the field), channel width, and orientation. Due to the uncertainties and the variation in survey methods, a rigorous quantitative analysis was not performed. However, average calculations of various breach metrics allow a qualitative analysis of breach development and evolution. This report presents an overview of the data collected and a summary discussion of the observed changes to the breach system and the seasonal wave climatology associated with the breach morphodynamic response.

New York↗
USGS2006

Sources of water to wells in updip areas of the Wenonah-Mount Laurel aquifer, Gloucester and Camden Counties, New Jersey

Since 1996, when the New Jersey Department of Environmental Protection (NJDEP) restricted ground-water withdrawals from the Potomac-Raritan-Magothy aquifer system in the southern New Jersey Coastal Plain as a result of excessive drawdown, Coastal Plain communities have been interested in developing alternate sources of water supply for their residents. The use of ground water from areas near the updip parts of the overlying confined aquifers where withdrawals are not restricted is being considered to meet the demand for drinking water. Concerns have arisen, however, regarding the potential effects of increased withdrawals from these areas on ground-water flow to streams and wetlands as well as to the deeper, confined parts of the aquifers. Therefore, the U.S. Geological Survey, in cooperation with the NJDEP, conducted a study to investigate the sources of water to currently inactive wells in the updip part of the Wenonah-Mount Laurel aquifer in Gloucester and Camden Counties, New Jersey. Of particular interest is whether the primary source of the increased withdrawals is likely to be the aquifer outcrop or the downdip, confined part of the aquifer. The outcrop of the Wenonah-Mount Laurel aquifer covers nearly 8 mi2 (square miles), or about 46 percent of Deptford Township's 17.56-mi2 area. The Deptford Township Municipal Utilities Authority owns six currently (2005) inactive wells in the Wenonah-Mount Laurel aquifer at the southeastern boundary of Deptford Township, 1.25 mi (miles) from the outcrop. For the purposes of this study, an existing ground-water-flow model of the New Jersey Coastal Plain aquifers was used to simulate ground-water-flow conditions in Gloucester and Camden Counties in 1998. Two alternative withdrawal scenarios were superimposed on the results of the 1998 simulation. In the first (the 'full-allocation' scenario), full-allocation withdrawal rates established by the NJDEP were applied to 45 existing wells in the Deptford Township area. In the second (the 'additional-withdrawal' scenario), the full-allocation scenario was modified by adding an additional withdrawal of 1.62 million gallons per day from the six inactive Deptford Township withdrawal wells. Simulated drawdown for the full-allocation scenario is zero to near zero in Deptford Township. Changes are greatest downdip from Deptford Township, where a broad area of 5- to 10-ft (feet) drawdowns is simulated; maximum drawdown at the center of the cone of depression is 20 ft. Water levels declined as much as 10 ft around individual wells whose current withdrawals are only a small percentage of their allotted allocation. Simulated drawdown for the additional-withdrawal scenario exceeds 40 ft and is centered around the six inactive Deptford Township withdrawal wells. The area in which the simulated drawdown is 5 ft extends approximately 3.75 mi downdip from the wells and 2 mi updip, into the outcrop. Water budgets based on the simulation results for the full-allocation and additional-withdrawal scenarios were calculated and compared, with particular focus on a 75-mi2 area in and around Deptford Township that includes the outcrop of the Wenonah-Mount Laurel aquifer and part of the area downdip from the outcrop (budget zone 2). The comparison of the two water budgets for zone 2 shows that 46 percent of the withdrawals from the six inactive Deptford Township wells would result from reduced stream base flow in the outcrop of the Wenonah-Mount Laurel aquifer and 35 percent would result from increased downward flow from the overlying Vincentown aquifer. Four percent would result from increased flow from the downdip areas of the Wenonah-Mount Laurel aquifer, 5 percent would result from decreased flow to the downdip areas of the Wenonah-Mount Laurel aquifer, and 5 percent would result from decreased flow to the underlying Englishtown aquifer system. The remaining 4 percent was attributed to decreased upward flow to the overlying Vincentown aquifer.

Scientific Investigations Report↗
USGS2011

Hydrologic assessment of three drainage basins in the Pinelands of southern New Jersey, 2004-06

The New Jersey Pinelands is an ecologically diverse area in the southern New Jersey Coastal Plain, most of which overlies the Kirkwood-Cohansey aquifer system. The demand for groundwater from this aquifer system is increasing as local development increases. Because any increase in groundwater withdrawals has the potential to affect streamflows and wetland water levels, and ultimately threaten the ecological health and diversity of the Pinelands ecosystem, the U.S. Geological Survey, in cooperation with the New Jersey Pinelands Commission, began a multi-phase hydrologic investigation in 2004 to characterize the hydrologic system supporting the aquatic and wetland communities of the New Jersey Pinelands area (Pinelands). The current investigation of the hydrology of three representative drainage basins in the Pinelands (Albertson Brook, McDonalds Branch, and Morses Mill Stream basins) included a compilation of existing data; collection of water-level and streamflow data; mapping of the water-table altitude and depth to the water table; and analyses of water-level and streamflow variability, subsurface gradients and flow patterns, and water budgets. During 2004-06, a hydrologic database of existing and new data from wells and stream sites was compiled. Methods of data collection and analysis were defined, and data networks consisting of 471 wells and 106 surface-water sites were established. Hydrographs from 26 water-level-monitoring wells and four streamflow-gaging stations were analyzed to show the response of water levels and streamflow to precipitation and recharge with respect to the locations of these wells and streams within each basin. Water-level hydrographs show varying hydraulic gradients and flow potentials, and indicate that responses to recharge events vary with well depth and proximity to recharge and discharge areas. Results of the investigation provide a detailed characterization of hydrologic conditions, processes, and relations among the components of the hydrologic cycle in the Pinelands. In the Pinelands, recharge replenishes the aquifer system and contributes to groundwater flow, most of which moves to wetlands and surface water where natural discharge occurs. Some groundwater flow is intercepted by supply wells. Recharge rates generally are highest during the non-growing season and are inversely related to evapotranspiration. Analysis of subsurface hydraulic gradients, water-table fluctuations, and streamflow variability indicates a strong linkage between groundwater and wetlands, lakes and streams. Gradient analysis indicates that most wetlands are in groundwater discharge areas, but some wetlands are in groundwater recharge areas. The depth to the water table ranges from zero at surface-water features up to about 10 meters in topographically high areas. Depth to water fluctuates seasonally, and the magnitude of these fluctuations generally increases with distance from surface water. Variations in the permeability of the soils and sediments of the aquifer system strongly affect patterns of water movement through the subsurface and the interaction of groundwater with wetlands, lakes and streams. Mean annual streamflow during 2004-06 ranged from 83 to 106 percent of the long-term mean annual discharge, indicating that the data-collection period can be considered representative of average conditions. Measurements of groundwater levels, stream stage, and stream discharge and locations of start-of-flow are illustrated in basin-wide maps of water-table altitude, depth to the water table, and stream base flow during the period. Water-level data collected along 15 hydrologic transects that span the range of environments from uplands through wetlands to surface water were used to determine hydraulic gradients, potential flow directions, and areas of recharge and discharge. These data provide information about the localized interactions of groundwater with wetlands and surface water. Wetlands were categorized with r

New Jersey↗