Geology ReportsSearch

SEARCH · Geology Reports

Results for “Nature”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources

Methylmercury in flood-control impoundments and natural waters of northwestern Minnesota, 1997-99

We studied methylmercury (MeHg) and total mercury (HgT) in impounded and natural surface waters in northwestern Minnesota, in settings ranging from agricultural to undeveloped. In a recently constructed (1995) permanent-pool impoundment, MeHg levels typically increased from inflow to outflow during 1997; this trend broke down from late 1998 to early 1999. MeHg levels in the outflow reached seasonal maxima in mid-summer (maximum of 1.0 ng L −1 in July 1997) and late-winter (maximum of 6.6 ng L −1 in February 1999), and are comparable to high levels observed in new hydroelectric reservoirs in Canada. Spring and autumn MeHg levels were typically about 0.1–0.2 ng L −1 . Overall, MeHg levels in both the inflow (a ditch that drains peatlands) and outflow were significantly higher than in three nearby reference natural lakes. Eleven older permanent-pool impoundments and six natural lakes in northwestern Minnesota were sampled five times. The impoundments typically had higher MeHg levels (0.071–8.36 ng L −1 ) than natural lakes. Five of six lakes MeHg levels typical of uncontaminated lakes (0.014–1.04 ng L −1 ) with highest levels in late winter, whereas a hypereutrophic lake had high levels (0.37–3.67 ng L −1 ) with highest levels in mid-summer. Seven temporary-pool impoundments were sampled during summer high-flow events. Temporary-pool impoundments that retained water for about 10–15 days after innundation yielded pronounced increases in MeHg from inflow to outflow, in one case reaching 4.6 ng L −1 , which was about 2 ng L −1 greater than the mean inflow concentration during the runoff event.

Minnesota

Genetic variation in natural and translocated populations of the endangered Delmarva fox squirrel (Sciurus niger cinereus)

The Delmarva fox squirrel, Sciurus niger cinereus , is a federally listed endangered subspecies whose range has been reduced by 90%. In an attempt to increase both population size and range, translocation sites were established beginning in the 1960's by moving squirrels from the natural range to sites outside the current range. Although translocations have served as the primary component of the DFS recovery program, there has been very little post-release examination of the genetics of the translocation sites. In this study, we developed ten microsatellite loci, screened the three polymorphic loci, and sequenced a 330 bp fragment of the mitochondrial control region in order to assess levels of genetic variation in natural and translocated regions of Delmarva fox squirrels and to compare them to Southeastern fox squirrels ( S. n. niger ). Although we found low levels of microsatellite polymorphism, there were no differences in heterozygosity between natural and translocated regions, or between Delmarva and Southeastern fox squirrels. We found high levels of polymorphism in the mitochondrial control region. Our patterns of haplotype diversity suggest incomplete lineage sorting of the two subspecies. In general, our data suggest that the current levels of genetic variation in the translocated sites are representative of those found in the natural population, and we encourage the continued use of translocations as a major component of Delmarva fox squirrel recovery.

Conservation Genetics

Near-fault velocity spectra from laboratory failures and their relation to natural ground motion

We compared near-fault velocity spectra recorded during laboratory experiments to that of natural earthquakes. We fractured crystalline rock samples at room temperature and intermediate confining pressure (50 MPa). Subsequent slip events were generated on the fracture surfaces under higher confinement (300 MPa). Velocity spectra from rock fracture resemble the inverse frequency (1/ f ) decay of natural earthquake velocity. This spectrum can be attributed to fault creation via seismic fracturing over a wide range of spatial scales. In contrast, subsequent slips on the rough fracture surfaces are depleted in high frequency energy and falloff approximately as 1/ f 2 . The 1/ f 2 spectrum is more consistent with a slider-block model obeying static-kinetic friction than a natural earthquake. The depleted high frequency content precludes the rough fault experiments from being directly analogous to natural sources. The suppression of high frequencies may have resulted from two possible factors: (1) the presence of a well-developed shear zone and coseismic damping of the fault motion by dissipation within it or, in our favored interpretation, (2) a smaller amount of energy dissipated by shearing relative to the total energy release at elevated confining pressure. In context of the latter explanation, a unifying concept that applies to these experiments, earthquakes, ground motion, and models of complex radiated motion is that high frequency radiated energy is relatively enhanced when total energy release is nearly balanced within the source region by dissipative processes. This near-critical energy release condition can be accessed at low normal stress in laboratory experiments.

Journal of Geophysical Research

The global occurrence of natural gas hydrate

Natural gas hydrate occurs worldwide in oceanic sediment of continental and insular slopes and rises of active and passive margins, in deep-water sediment of inland lakes and seas, and in polar sediment on both continents and continental shelves. In aquatic sediment, where water depths exceed about 300 m and bottom water temperatures approach 0° C, gas hydrate is found at the seafloor to sediment depths of about 1,100 m. In polar continental regions, gas hydrate can be present in sediment at depths between about 150 and 2000 m. Thus, natural gas hydrate is restricted to the shallow geosphere where its presence affects the physical and chemical properties of near-surface sediment. An updated global inventory reports on natural gas hydrate recovered from 19 places worldwide and includes 77 places where the presence of gas hydrate has been inferred from geophysical, geochemical, and geological evidence. The potential amount of methane in natural gas hydrate is enormous, with current estimates converging around about 10 teratonnes (10 19 g) of methane carbon.

Book chapter

Metaproteomics and metagenomics reveal microbial pathways of organic matter degradation and methanogenesis in a marginally producing natural gas well

The expansion of natural gas production and utilization worldwide has led to the decline of many once-productive wells, eventually resulting in costly well-plugging and unused infrastructure. However, in areas like the Michigan basin, MI, where the majority of natural gas is biogenically produced, microbial communities could potentially be stimulated to generate additional methane, increasing gas supply and reducing the need to drill new wells. In this study, we performed metaproteomic, metagenomic, and geochemical analyses of Antrim Shale formation water from a marginally producing natural gas well to evaluate resident microbial community functions in the context of potential bioenergy production. Functional proteins involved in methanogenesis, degradation/catabolism (including organic matter degradation), biosynthesis, energy utilization, transmembrane transport, and stress response were among the most commonly identified groups. Three metagenome-assembled genomes (MAGs) were characterized, including Methanomicrobiaceae, Methanothrix , and Smithella . For each, the identified proteins involved in methanogenesis and the degradation of diverse organic compounds, strongly suggest their role in utilizing shale-derived organic matter. These findings provide an increased understanding of the microorganisms and their metabolisms generating natural gas in the Antrim Shale and establish a foundation for future stimulation efforts aimed at enhancing biogenic methane production in marginal gas wells.

Michigan

Selecting remediation goals by assessing the natural attenuation capacity of groundwater systems

Remediation goals for the source areas of a chlorinated ethene‐contaminated groundwater plume were identified by assessing the natural attenuation capacity of the aquifer system. The redox chemistry of the site indicates that sulfate‐reducing (H 2 ∼ 2 nanomoles [nM]) per liter conditions near the contaminant source grade to Fe(III)‐reducing conditions (H 2 ∼ 0.5 nM) downgradient of the source. Sulfate‐reducing conditions facilitate the initial reduction of perchloroethene (PCE) to trichloroethene (TCE), cis ‐dichloroethene ( cis ‐DCE), and vinyl chloride (VC). Subsequently, the Fe(III)‐reducing conditions drive the oxidation of cis ‐DCE and VC to carbon dioxide and chloride. This sequence gives the aquifer a substantial capacity for biodegrading chlorinated ethenes. Natural attenuation capacity (the slope of the steady‐state contaminant concentration profile along a groundwater flowpath) is a function of biodegradation rates, aquifer dispersive characteristics, and groundwater flow velocity. The natural attenuation capacity at the Kings Bay, Georgia site was assessed by estimating groundwater flowrates (∼0.23 ± 0.12 m/d) and aquifer dispersivity (∼1 m) from hydrologic and scale considerations. Apparent biodegradation rate constants (PCE and TCE ∼ 0.01 d −1 ; cis ‐DCE and VC ∼ 0.025 d −1 ) were estimated from observed contaminant concentration changes along aquifer flowpaths. A boundary‐value problem approach was used to estimate levels to which contaminant concentrations in the source areas must be lowered (by engineered removal), or groundwater flow velocities lowered (by pumping) for the natural attenuation capacity to achieve maximum concentration limits (MCLs) prior to reaching a predetermined regulatory point of compliance.

Bioremediation Journal

Radar image and data fusion for natural hazards characterisation

Fusion of synthetic aperture radar (SAR) images through interferometric, polarimetric and tomographic processing provides an all - weather imaging capability to characterise and monitor various natural hazards. This article outlines interferometric synthetic aperture radar (InSAR) processing and products and their utility for natural hazards characterisation, provides an overview of the techniques and applications related to fusion of SAR/InSAR images with optical and other images and highlights the emerging SAR fusion technologies. In addition to providing precise land - surface digital elevation maps, SAR - derived imaging products can map millimetre - scale elevation changes driven by volcanic, seismic and hydrogeologic processes, by landslides and wildfires and other natural hazards. With products derived from the fusion of SAR and other images, scientists can monitor the progress of flooding, estimate water storage changes in wetlands for improved hydrological modelling predictions and assessments of future flood impacts and map vegetation structure on a global scale and monitor its changes due to such processes as fire, volcanic eruption and deforestation. With the availability of SAR images in near real - time from multiple satellites in the near future, the fusion of SAR images with other images and data is playing an increasingly important role in understanding and forecasting natural hazards.

International Journal of Image and Data Fusion

Characterizing operational signatures of reservoirs with the SWOT satellite by comparing natural lake and reservoir dynamics

Due to a lack of management operations data, hydrological models may represent reservoirs as natural lakes, leading to poor discharge predictions in regulated basins. To parse seasonal operational signatures, we compare the dynamics of natural lake and reservoir systems across North America using Surface Water and Ocean Topography (SWOT) satellite observations and derived discharge estimates. Overall, reservoirs and their adjacent river reaches exhibit significantly greater variability (in standard deviation) than their natural counterparts across almost all SWOT observed (e.g. water surface elevation) and inferred (e.g. discharge) variables. Natural lakes show strong same-day correlations between inflow and outflow discharge (median Spearman R = 0.8), whereas 76% of reservoirs exhibit maximum correlation when outflow is lagged, suggesting operations buffer seasonal flow variability. Our findings indicate operations not only affect reservoir dynamics themselves but also have upstream and downstream consequences, which, when integrated into models, will offer more realistic hydrologic conditions.

Environmental Research Letters

First evidence of natural reproduction and recruitment of reintroduced Lake Sturgeon in the Coosa River, Georgia

Objective Lake Sturgeon Acipenser fluences became extirpated from the Coosa River system in Georgia and Alabama during the 1970s. The Georgia Department of Natural Resources began stocking hatchery-raised Lake Sturgeon in 2002 with the goal of reestablishing a self-sustaining population. Stocking lapsed in 2020 due to the COVID-19 pandemic, which allowed an opportunity to assess natural recruitment to the reintroduced population. Methods We conducted trammel-net surveys during May–August in 2022 and 2023 and removed a pectoral fin spine section from all captured individuals. We compared the fin spine sections of suspected naturally hatched juveniles with those from known-age, hatchery-raised juveniles to confirm our age estimates. Results We captured one age-2 juvenile Lake Sturgeon in 2022 and eight age-3 juveniles in 2023. This indicates the presence of natural recruitment due to the absence of stocking of hatchery individuals in 2020. Conclusions Documenting individuals of a year-class that was not created by hatchery-raised juveniles provides the first evidence that offspring of early reintroduced Lake Sturgeon are being recruited into the reintroduced population in the Coosa River, Georgia.

Alabama, Georgia

Parentage-based tagging using mothers balances accuracy and cost for discriminating between natural and stocked recruitment for inland fisheries

Hatchery programmes are frequently used to supplement inland fisheries, yet achieving successful management outcomes often requires information on stocked versus naturally reproduced fish abundance. Parentage-based tagging – genetically assigning offspring to their parents – has potential to be an effective approach for distinguishing stocked and naturally reproduced fish. However, several challenges may limit its application to inland fisheries, including genetic relatedness among populations that can affect identification accuracy and high costs of genotyping large broodstocks. Here, we demonstrate the efficacy of parentage-based tagging based on broodmothers in the Lake Ontario Chinook Salmon fishery, which uses thousands of broodparents and has potential for substantial relatedness between stocked and naturally reproduced fish. Restricting parent sampling to broodmothers reduced costs by two-thirds, was logistically pragmatic, and achieved >95% accuracy in distinguishing stocked from naturally reproduced salmon. Combined, these results highlight the potential wide applicability of parentage-based tagging for assessing stocking programmes in inland waters.

New York, Ontario

Contribution of natural history collection data to biodiversity assessment in national parks

There has been mounting interest in the use of museum and herbaria collections to assess biodiversity; information is often difficult to locate and access, however, and few recommendations are available for effectively using natural history collections. As part of an effort to inventory vertebrates and vascular plants in U.S. national parks, we searched manually and by computer for specimens originating within or adjacent to 14 parks throughout the northeastern United States. We compared the number of specimens located to collection size to determine whether there was any effect on detection rate of specimens. We evaluated the importance of park characteristics (e.g., age since establishment, size, theme [natural vs. cultural]) for influencing the number of specimens found in a collection. We located >31,000 specimens and compiled associated records (hereafter referred to as specimens) from 78 collections; >9000 specimens were park-significant, originating either within park boundaries or in the local township where the park was located. We found >2000 specimens by means of manual searches, which cost $0.001–0.15 per specimen searched and $0.81–151.95 per specimen found. Collection effort appeared relatively uniform between 1890 and 1980, with low periods corresponding to significant sociopolitical events. Detection rates for specimens were inversely related to collection size. Although specimens were most often located in collections within the region of interest, specimens can be found anywhere, particularly in large collections international in scope, suggesting that global searches will be necessary to evaluate historical biodiversity. Park characteristics indicated that more collecting effort occurred within or adjacent to larger parks established for natural resources than in smaller historical sites. Because many institutions have not yet established electronic databases for collections, manual searches can be useful for retrieving specimens. Our results show that thorough, systematic searching of natural history collections for park-significant specimens can provide a historical perspective on biodiversity for park managers.

Conservation Biology

GeoNat v1.0: A dataset for natural feature mapping with artificial intelligence and supervised learning

Machine learning allows “the machine” to deduce the complex and sometimes unrecognized rules governing spatial systems, particularly topographic mapping, by exposing it to the end product. Often, the obstacle to this approach is the acquisition of many good and labeled training examples of the desired result. Such is the case with most types of natural features. To address such limitations, this research introduces GeoNat v1.0, a natural feature dataset, used to support artificial intelligence‐based mapping and automated detection of natural features under a supervised learning paradigm. The dataset was created by randomly selecting points from the U.S. Geological Survey’s Geographic Names Information System and includes approximately 200 examples each of 10 classes of natural features. Resulting data were tested in an object‐detection problem using a region‐based convolutional neural network. The object‐detection tests resulted in a 62% mean average precision as baseline results. Major challenges in developing training data in the geospatial domain, such as scale and geographical representativeness, are addressed in this article. We hope that the resulting dataset will be useful for a variety of applications and shed light on training data collection and labeling in the geospatial artificial intelligence domain.

Transactions in GIS

Discriminating between natural vs induced seismicity from long-term deformation history of intraplate faults

To assess whether recent seismicity is induced by human activity or is of natural origin, we analyze fault displacements on high-resolution seismic reflection profiles for two regions in the central United States (CUS): the Fort Worth Basin (FWB) of Texas, and the northern Mississippi embayment (NME). Since 2009 earthquake activity in the CUS has increased dramatically, and numerous publications suggest that this increase is primarily due to induced earthquakes caused by deep-well injection of wastewater, both flowback water from hydrofracturing operations and produced water accompanying hydrocarbon production. Alternatively, some argue that these earthquakes are natural, and that the seismicity increase is a normal variation that occurs over millions of years. Our analysis shows that within the NME, faults deform both Quaternary alluvium and underlying sediments dating from Paleozoic through Tertiary, with displacement increasing with geologic unit age, documenting a long history of natural activity. In the FWB, a region of ongoing wastewater injection, basement faults show deformation of the Proterozoic and Paleozoic units, but little or no deformation of younger strata. Specifically, vertical displacements in the post-Pennsylvanian formations, if any, are below the resolution (~15 m) of the seismic data, far less than expected had these faults accumulated deformation over millions of years. Our results support the assertion that recent FWB earthquakes are of induced origin; this conclusion is entirely independent of analyses correlating seismicity and wastewater injection practices. To our knowledge this is the first study to discriminate natural and induced seismicity using classical structural geology analysis techniques.

Arkansas, Illinois, Mississippi, Missouri, Tenness

Natural graphite demand and supply - Implications for electric vehicle battery requirements

Electric vehicles have been promoted to reduce greenhouse gas emissions and lessen U.S. dependence on petroleum for transportation. Growth in U.S. sales of electric vehicles has been hindered by technical difficulties and the high cost of the lithium-ion batteries used to power many electric vehicles (more than 50% of the vehicle cost). Groundbreaking has begun for a lithium-ion battery factory in Nevada that, at capacity, could manufacture enough batteries to power 500,000 electric vehicles of various types and provide economies of scale to reduce the cost of batteries. Currently, primary synthetic graphite derived from petroleum coke is used in the anode of most lithium-ion batteries. An alternate may be the use of natural flake graphite, which would result in estimated graphite cost reductions of more than US$400 per vehicle at 2013 prices. Most natural flake graphite is sourced from China, the world's leading graphite producer. Sourcing natural flake graphite from deposits in North America could reduce raw material transportation costs and, given China's growing internal demand for flake graphite for its industries and ongoing environmental, labor, and mining issues, may ensure a more reliable and environmentally conscious supply of graphite. North America has flake graphite resources, and Canada is currently a producer, but most new mining projects in the United States require more than 10 yr to reach production, and demand could exceed supplies of flake graphite. Natural flake graphite may serve only to supplement synthetic graphite, at least for the short-term outlook.

GSA Special Papers

Rapid discovery of SNPs differentiating hatchery steelhead trout from ESA-listed natural-origin steelhead trout using a 57K SNP array

Natural-origin steelhead trout ( Oncorhynchus mykiss (Walbaum, 1792)) in the Pacific Northwest, USA, are threatened by a number of factors including habitat destruction, disease, decline in marine survival, and a potential erosion of genetic viability due to introgression from hatchery strains. Our major goal was to use a recently developed SNP array containing ∼57 000 SNPs to identify a subset of SNPs that differentiate hatchery and natural-origin populations. We analyzed 35 765 polymorphic SNPs in nine populations of steelhead trout sampled from Puget Sound, Washington, USA. We then conducted two outlier tests and found 360 loci that were candidates for divergent selection between hatchery and natural-origin populations (mean F CT = 0.29, maximum = 0.65) and 595 SNPs that were candidates for selection among natural-origin populations (mean F ST = 0.25, maximum = 0.51). Comparisons with a linkage map revealed that two chromosomes (Omy05 and Omy25) contained significantly more outliers than other chromosomes, suggesting that regions on Omy05 and Omy25 may be of adaptive significance. Our results highlight several advantages of the 57 000 SNP array as a tool for population and conservation genomics studies.

British Columbia, Washington

Anthropogenic vs. natural pollution: An environmental study of an industrial site under remediation (Naples, Italy)

Heavy metal concentrations and Pb isotopic composition were determined in the soils, slags, scums and landfill materials from a shut down industrial (brownfield) site. This was the second largest integrated steelworks in Italy, and is now under remediation by a Government project. It is located in the outskirts of Napoli on the Bagnoli-Fuorigrotta plain (BFP), which is part of the Campi Flegrei (CF) volcanic caldera, where many spas and geothermal springs occur. The purpose of this work is to distinguish the natural (geogenic) component, originated by hydrothermal activity, from anthropogenic contamination owing to industrial activity. 'In-situ sediments' (soils), slags, scums and landfill materials from 20 drill-cores were selected from a network of 197 drills carried out on a 100 ?? 100 m grid, covering the entire brownfield site. In general, heavy metal enrichments in the upper 3 m of the cores strongly suggest mixing between natural (geogenic) and anthropogenic components. Pb isotopic data are suggestive of three potential end members, and confirm the existence of a strong natural component in addition to contamination from anthropogenic activities. The slags, scums and landfill materials have been proved, through mineralogy and leachate experiments, to be geochemically stable; this shows that metal pollutants are not bio-available and, hence, do not pose a risk to future developments on this site. The natural contribution of hydrothermal fluids to soil pollution, in addition to the non-bio-availability of metal pollutants from industrial materials, indicate that heavy metal remediation of soils in this area would be of little use. Continuous discharge from mineralized hydrothermal solutions would cancel out any remediation effort.

Geochemistry: Exploration, Environment, Analysis

The web of life: Natural science information on the Internet

As society has come to equate economic prosperity with the health of our living resources, national science policy has called for the development of a comprehensive digital knowledge base to support informed decision making and wise resource management. The Internet and World Wide Web demonstrate the earliest stages of this evolving virtual library of the natural world, offering an increasing array of high-quality, innovative resources and services in the natural science arena. This article discusses the leading providers of natural science information on the Internet and highlights some of the exemplary resources they are delivering online. The discussion concludes with a brief discussion of the role of the librarian in developing the Web of natural science knowledge online and provides a short Webliography of starting points for further exploration of this subject area. PDF

Journal of Library Administration

Applying the Land Use Portfolio Model with Hazus to analyse risk from natural hazard events

This paper describes and demonstrates the integration of two geospatial decision-support systems for natural-hazard risk assessment and management. Hazus is a risk-assessment tool developed by the Federal Emergency Management Agency to identify risks and estimate the severity of risk from natural hazards. The Land Use Portfolio Model (LUPM) is a risk-management tool developed by the U.S. Geological Survey to evaluate plans or actions intended to reduce risk from natural hazards. We analysed three mitigation policies for one earthquake scenario in the San Francisco Bay area to demonstrate the added value of using Hazus and the LUPM together. The demonstration showed that Hazus loss estimates can be input to the LUPM to obtain estimates of losses avoided through mitigation, rates of return on mitigation investment, and measures of uncertainty. Together, they offer a more comprehensive approach to help with decisions for reducing risk from natural hazards.

International Journal of Risk Assessment and Manag