Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Natural Hazards”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

486 records · Page 14Linked to original sources
USGS2024

Insights on gas hydrate formation and growth within an interbedded sand reservoir from well logging at the Qiongdongnan Basin, South China Sea

Although variable well log resolution and its control on saturation estimation has been studied, it has not been directly applied to a specific location to explore the nature of gas hydrate within a sand reservoir. We applied in-situ measurements of resistivities, neutron porosity, and gamma ray at two sites in the Qiongdongnan Basin, South China Sea (QDN-W05–2021 and QDN-W08–2021) to investigate the reservoir parameters of a hydrate-bearing sand reservoir. Our results show that gas hydrate is distributed in 5 zones with a total thickness of 10.7 m and an average saturation of 69% at the QDN-W05–2021 site, while they are distributed in 2 zones with a total thickness of 4.3 m and an average saturation of 49% at the QDN-W08–2021 site. We found that variances in saturations estimated from lateral-extra deep button (RX), phase shift (P40H-P40L), and attenuation (A40H-A40L) resistivities within the laterally mapped continuous sand body were affected by the nature of gas hydrate occurrences. Results indicate gas hydrate forms and accumulates at the center of the sand layer and tends to be less or not present toward the top and base. Integrated with seismic data, the in-situ measurements provide insights in the evolution of a mushroom-shaped, hydrate-gas reservoir system. In the system, free gas is likely horizontally transported from the top-center of the gas chimney to the surrounding areas in the early stage dominated by a warm-gas environment, whereas hydrate forms in the opposite pathway starting from the surrounding areas in the following stage with temperature reducing. Our study suggests that high-resolution in-situ measurements not only are a tool to identify the physical properties, but also can be used to help explain the physical process of hydrate growth and accumulation.

Marine Geology↗
USGS2000

Shoals and valley plugs in the Hatchie River watershed

Agricultural land use and gully erosion have historically contributed more sediment to the streams of the Hatchie River watershed than those streams can carry. In 1970, the main sedimentation problem in the watershed occurred in the tributary flood plains. This problem motivated channelization projects (U.S. Department of Agriculture, 1970). By the mid-1980's, concern had shifted to sedimentation in the Hatchie River itself where channelized tributaries were understood to contribute much of the sediment. The Soil Conservation Service [Natural Resources Conservation Service (NRCS) since 1996] estimated that 640,000 tons of bedload (sand) accumulates in the Hatchie River each year and identified roughly the eastern two-thirds of the watershed, where loess is thin or absent, as the main source of sand (U.S. Department of Agriculture, 1986a). The U.S. Geological Survey (USGS), in cooperation with the West Tennessee River Basin Authority (WTRBA), conducted a study of sediment accumulation in the Hatchie River and its tributaries. This report identifies the types of tributaries and evaluates sediment, shoal formation, and valley-plug problems. The results presented here may contribute to a better understanding of similar problems in West Tennessee and the rest of the southeastern coastal plain. This information also will help the WTRBA manage sedimentation and erosion problems in the Hatchie River watershed. The source of the Mississippi section of the Hatchie River is in the sand hills southwest of Corinth, Mississippi (fig. 1). This section of the Hatchie River flows northward in an artificial drainage canal, gathering water from tributary streams that also are channelized. The drainage canal ends 2 miles south of the Tennessee State line. The Tennessee section of the Hatchie River winds north and west in a meandering natural channel to the Mississippi River. Although most of the Hatchie River tributaries are also drainage canals, the river's main stem has kept most of its natural character. The Hatchie River flows through a wide valley bottom occupied mostly by riverine wetland. Historically, the valley bottom has supported hardwood forests. Since publication of the first Hatchie River report (U.S. Department of Agriculture, 1970), the channel of the river has become shallower, and flooding has increased (U.S. Department of Agriculture 1986b). These wetter conditions inhibit growth of hardwoods and lead to premature hardwood mortality. The NRCS has predicted that despite efforts to control erosion in the uplands, most of the valley-bottom forest will die. '...swamping may be so prevalent as to change most of the Hatchie River Basin flood plain into a marsh condition, with the only remnants of the present bottomland hardwood timber remaining. (U.S. Department of Agriculture, 1986b). Loss of channel depth has been concentrated in short reaches near tributary mouths. At the mouths of Richland, Porters, Clover, and Muddy Creeks, navigation has become difficult for recreational users (Johnny Carlin, West Tennessee River Basin Authority, oral commun., 1998). As the low-gradient alluvial system of the Hatchie River accumulates sediment, another common outcome has been the formation of valley plugs, areas where 'channels are filled with sediment, and all the additional bedload brought downstream is then spread out over the flood plain until a new channel has been formed' (Happ, 1975). Valley plugs typically form where the slope of a sand-laden tributary decreases downstream, or where the tributary joins its parent stream (Happ and others, 1940; Diehl, 1994, 1997; Smith and Diehl, 2000).

Mississippi, Tennessee↗
USGS2025

Spatio-temporal evolution of distributed volcanic fields, case studies—Sierra Chichinautzin and Michoacán-Guanajuato, México

An analysis of 1,375 volcanoes in the Michoacán-Guanajuato (1,148 volcanoes in a 26,200 square-kilometer area) and Sierra Chichinautzin (227 volcanoes in a 3,500 square-kilometer area) volcanic fields in central Mexico identified patterns in the spatial and temporal distribution of past eruptions. A cluster agglomerative hierarchical method and kernel analysis confirmed that the Michoacán-Guanajuato volcanic field comprises four volcanic fields (Valle de Santiago, Uruapan, Apatzingán, and Pátzcuaro volcanic fields) controlled by different fault systems, indicating that it is not a single volcanic field but rather a group of volcanic fields (a “superfield”), each of which has distinct characteristics. In the Sierra Chichinautzin volcanic field, well-constrained isotopic ages were used to build a model of how the spatial distribution of the eruptions has changed over time. Two new 40Ar/39Ar ages from a locally recognized volcanic feature near the town of El Cantil, herein called El Cantil volcano (1,537±17 kilo-annum [ka]) and the volcanic feature at Cerro el Elefante (herein called El Elefante dome) (1,485±92 ka) belong to the oldest volcanic group identified in the Sierra Chichinautzin volcanic field, confirming the timing of the beginning of monogenetic volcanism in the region. Based on the volcanic groups identified in the Sierra Chichinautzin volcanic field, the youngest volcanism (less than 35 ka) is found only in the central-western sector of the field. Principal component analysis determined the directional trends of feeder dikes only for vents <10 ka in the Sierra Chichinautzin volcanic field. Possible magma migration paths through the crust were identified using seismic data from both volcanic fields using an earthquake catalog from 1973 to 2023, which includes 9,016 earthquakes in the Michoacán-Guanajuato volcanic field and 841 in the Sierra Chichinautzin volcanic field. The spatial distribution of the hypocenters does not highlight any trend that could be associated with superficial movement of magma in the Sierra Chichinautzin volcanic field. In the Michoacán-Guanajuato volcanic field, however, eight seismic swarms since 1997 have been detected. These swarms are interpreted to result from ascending magma. Strengthening monitoring systems and reinforcing mitigation measures to address volcanic hazards and risk are important means of preparing for future eruptions in both regions. Analysis such as those herein provide insights as to where an eruption might occur and may help mitigate volcanic hazards.

Michoacán-Guanajuato, Sierra Chichinautzin↗
USGS2024

Groundwater quality near the Placerita Oil Field, California, 2018

Groundwater-quality data and potential fluid-migration pathways near the Placerita Oil Field in Los Angeles County, California, were examined by the U.S. Geological Survey to determine if oil-field fluids (water and gas from oil-producing and non-producing zones) have mixed with groundwater resources. Six of the 13 new groundwater samples collected for this study contained petroleum hydrocarbons, thermogenic gas, inorganic chemical signatures, and (or) isotopic values consistent with potential mixing with fluids from hydrocarbon-bearing formations. For historical groundwater samples, benzene was the most detected petroleum hydrocarbon. The historical groundwater samples with a benzene concentration greater than 0.5 micrograms per liter were from environmental monitoring wells at industrial or commercial facilities unrelated to oil and gas development that, in many cases, have identified soil or groundwater contamination and were not typically analyzed for other constituents that could provide additional lines of evidence for potential mixing with oil-field fluids. Methane was not detected in any of the 12 historical samples with a reported measurement. Reviewing historical data revealed factors that could potentially adversely affect groundwater quality in the study area. These factors include modified hydraulic gradients caused by large volumes of water extracted from the main production area and reinjected downgradient into nonproducing zones, well-barrier failures in wells constructed in the northern part of the oil field before the 1970s, well-barrier failures in produced-water disposal wells downgradient from the main production area, and naturally occurring hydrocarbons at shallow intervals. The groundwater samples most geochemically similar to samples from hydrocarbon-bearing formations were in areas where hydrocarbons are naturally occurring at shallow intervals and where oil development is at shallow depths. Additional data for hydraulic heads, water quality, and formation temperatures at multiple depths in areas with large injection volumes and well-integrity issues are needed to evaluate whether those factors have contributed to mixing between fluids from oil-producing or injection formations and groundwater resources.

California↗
USGS2026

Bottom-up characterization of geologic methane emissions in the San Juan Basin in the southwestern USA

Methane is a potent greenhouse gas that plays an important role in atmospheric chemistry and global warming. The current global methane budget has large uncertainties, and a better understanding of the budget would help to guide strategies for reducing anthropogenic emissions to fight climate change. Natural geologic methane emissions are a particularly poorly constrained source, with top-down estimates from 14 C in ice cores suggesting much lower geologic emissions than bottom-up scaling of direct flux measurements. Our study aims to contribute to resolving this discrepancy through improved bottom-up characterization of geologic methane seepage in the San Juan Basin in southwestern Colorado and northwestern New Mexico, USA. We performed 983 new flux chamber measurements in this basin during summer 2022 and winter 2023 field campaigns. Our results, in combination with prior measurements, suggest that natural seepage in the San Juan Basin only occurs on or near the Fruitland coal outcrop. Specifically, our new measurements confirm previous measurements of seepage along the northwestern exposure of the Fruitland outcrop in Colorado (a known hydrodynamic overpressure region) and for the first time, identified seepage locations along the southernmost Fruitland outcrop exposure in New Mexico, in association with a coal cleat and a fault. Overall, seepage along the Fruitland coal outcrop is heterogeneously distributed, with both positive and negative (interpreted as microbial soil sink) methane fluxes. Features that are hypothesized to be predictive of seepage (e.g., faults) were not associated with positive methane fluxes in areas outside of the Fruitland outcrop. Our best estimate for total geologic methane seepage in the San Juan Basin from spatial interpolation and statistical upscaling is approximately 0.14 Tg CH 4 /yr, with a range from 0.029 to 0.48 Tg CH 4 /yr. This best-estimate value is lower than a previous bottom-up estimate from a gridded seepage inventory, but higher than a previous top-down estimate.

Colorado, New Mexico↗
USGS2026

Critical minerals in zinc ore—An update on Earth Mapping Resources Initiative Research in the Boulder Batholith region, Montana

Plain Language Summary U.S. Geological Survey research, in collaboration with Montana Technical University and Montana Bureau of Geology and Mines, is providing key critical mineral information that may have potential for critical mineral production of several mining districts in the Boulder Batholith region, to better understand the abundance and distribution of natural resources within this region. Continued research can be used to show the potential for previously undiscovered critical mineral resources in southwestern Montana and in other parts of the United States.

Montana↗
USGS2024

Field observations and logs from the Rose Hip trench exposure across a north-facing scarp within the Seattle Fault Zone, southern Bainbridge Island, Washington

The Seattle Fault Zone is an approximately 70-km-long, east-west-trending zone of south-dipping blind reverse faults within the Puget lowland region in Washington. Because of the proximity, the Seattle Fault Zone poses a significant earthquake hazard to the Puget sound and Seattle metropolitan regions. We present preliminary mapping and trench-site information from a paleoseismic investigation across a newly identified active fault scarp located within the hanging wall of the Seattle Fault Zone on southern Bainbridge Island, Washington. The trench exposed monoclinally folded Miocene bedrock, fractured and faulted glacial-related deposits, and laminated lacustrine deposits capped by slope-derived colluvium. The observations from this investigation record late Pleistocene to Holocene north-vergent folding and faulting along this new fault scarp.

Washington↗
USGS1973

Geohydrology of the Cross-Florida Barge Canal area, with special reference to the Ocala vicinity

The Cross-Florida Barge Canal route commences at Palatka on the St. Johns River, about 75 miles upstream from the Atlantic Ocean, and extends 110 miles southwestward across Peninsular Florida into deep water in the Gulf of Mexico near Yankeetown. The canal will be equipped with five locks, each 600 feet long and 84 feet wide, and the channel will be a minimum of 12 feet deep and 150 feet wide. From near Ocala northeastward, the canal channel will replace much of the natural channel of the Oklawaha River, and will be excavated into beds of the so-called shallow sand aquifer of Miocene age and younger, which overlies limestone of the Floridan aquifer. Westward from Ocala, most of the canal will be excavated below the potentiometric surface into limestone and dolomite of the Floridan aquifer. Water levels of Rodman, Eureka, and Inglis Pools will be controlled by dams and spillways with the limited exchange of water between the pools and the aquifers. The water levels in the Summit Pools will fluctuate with the natural changes in the ground-water level of the Floridan aquifer, although the stage of the pool will be controlled partly by the stage held in the Eureka Pool. A dynamic inflow-outflow relationship will exist between the Summit Pool and the Floridan aquifer. The Floridan aquifer in the canal area is 1,000 to 1,200 feet thick and consists of limestone and dolomite of middle Eocene Miocene age, including from older to younger, the Lake City, Avon Park, and Ocala limestones plus permeable sandy, dolomitic limestone in the lower part of the Hawthorn Formation. It is possible that most of the flow to the two major springs in the area occurs in the upper 100 feet or so of the aquifer in the Ocala Limestone. The aquifer is underlain by the Oldsmar limestone of early Eocene age and is overlain by sand, clayey sand, clay and shell beds of Miocene through Holocene age, in thickness from a few feet to 300 feet. The permeable beds overlying the Floridan aquifer constitute the shallow aquifer, while the poorly permeable ones act as confining beds where the Floridan aquifer is under artesian conditions. A north-south line drawn separating the head of Silver Springs on the west from the Oklawaha River on the east marks the approximate western limit of a continuous blanket of materials of Miocene-Pliocene(?) age covering the rocks of the Floridan aquifer. East of the line, much of the aquifer is under artesian conditions, particularly in the Oklawaha River valley, although in some areas east of the valley, direct recharge through thick permeable Miocene-Pliocene(?) sands occurs. West of the line, only scattered remnants of a once continuous Miocene-Pliocene(?) cover remain. Lack of the cover is a result of erosion on the crest and flank of the Ocala Uplift, a broad northwest-southeast trending anticlinal upwarp, the axis of which is crossed by the canal route in the Dunnellon area. Over most of this area the Floridan aquifer is unconfined and receives direct recharge through a cover of a few tens of feet of sand and clayey sand of Quaternary age. Tensional stresses during the structural evolution of the Ocala Uplift produced an intersecting system of fractures and normal faults in rocks of the Floridan aquifer. The fractures and faults are important controls for orientation of solution channels and, therefore, for development of ground-water circulation patterns. When the system surface streams, which once drained the Barge Canal area, eroded the poorly permeable Miocene-Pliocene(?) cover from the flanks of the Ocala Uplift, surface runoff was reduced and precipitation began to directly infiltrate the underlying limestones. Now only principal streams remain, such as the Oklawaha and Withlacoochee Rivers and a few short tributaries, while one of the most highly developed subsurface drainage systems in the world has evolved in cavernous limestone of the Floridan aquifer. Two of the larger freshwater springs in the world now discharge from the Floridan aquifer in the canal area. Silver Springs near Ocala discharges an average 531 mgd (million gallons per day) down the 4-mile long Silver River, which flows on poorly permeable beds to the Oklawaha River. Rainbow Springs near Dunnellon discharges on average 468 mgd from numerous orifices in the bed of the 5-mile-long Rainbow River, which flows into the Withlacoochee River. The heads of the springs have migrated to their present positions partly because of a tendency of ground-water levels to decline as permeability in the aquifer is increased due to removal of limestone by solution, and because of mechanical erosion of the limestone in the vicinity of the spring heads. Also, points of principal spring discharges have shifted in the past due to changes in ground-water levels in response to changes in sea level. The subsurface drainage system is continuing to evolve today, as evidenced in part by frequent occurrence of new sinkholes and by the presence of significant amounts of calcium bicarbonate in the spring waters. Rodman Pool, at the east end of the canal, is separated from the Floridan aquifer by poorly permeable materials. The pool's operating water level will be only a few feet above the potentiometric surface at the downstream end, and at or slightly below the potentiometric surface at the upstream end. Little exchange of water between the Rodman Pool and the Floridan aquifer is expected. Eureka Pool, just upstream from Rodman Pool, will also be separated from the Floridan aquifer by poorly permeable beds. However, the stage of the pool will be about 15 feet higher than the natural potentiometric surface at the pool's downstream end, and some seepage into the Floridan aquifer is anticipated through faults and leaky parts of the poorly permeable beds, with a consequent rise in ground-water levels in areas adjacent to the lower end of the pool. Possibilities for particulate contamination of the aquifer will tend to be minimized because of the filtering capacity of the materials through which water must pass to reach the aquifer, although the natural filter will not preclude movement into the aquifer of contaminants which might become dissolved in the pool waters. No significant interchange of water between the pool and the aquifer is expected at the upstream end of the Eureka Pool. Present construction plans indicate an operating stage for Eureka Pool which will range between 38 and 40 feet above mean sea level, although it is possible to dredge the pool deep enough to permit a range in stage of 36 to 40 feet. A backwater effect extending up Silver River from the Eureka Pool is expected to regulate the stage at the head of Silver Springs between 39 and 44 feet above mean sea level if the pool ranges between 36 and 40 feet. If Eureka Pool ranges only between 38 and 40 feet, the range of stage at the head of the springs should be about 41 to 44 feet above mean sea level. From Inglis Lock west, the canal will have direct connection with the Gulf, and canal stage will fluctuate with the Gulf tide. Since the canal stage will be slightly lower than the adjacent ground-water levels along much of the reach, there will be some ground-water inflow to the canal. No significant changes in the existing ground-water regime are expected in the vicinity of Inglis Pool, the first step up in the canal east of the Gulf. Existing ground-water and surface-water levels in the area will not change appreciable, and the natural stage and flow of Rainbow Springs, which will flow by way of Rainbow River into Inglis Pool, should not be affected by canal operations. A possible adverse effect of the canal on the Inglis Pool area could result if sea water is locked up from the Gulf through Inglis Lock. However, the high step of 25 feet at the lock, flushing action of continuous flow from Inglis Pool to the lower reaches of the Withlacoochee River, and use of possible preventive locking procedures should minimize the problem. The potential for adverse effects on the ground-water regime is greatest in the area of the Summit Pool. Through most of the length of the pool, the canal channel will be excavated into limestone of the Floridan aquifer to depths of 12 to 27 feet below the potentiometric surface. Changes that will take place in the ground-water flow system in the Silver Springs drainage area, once the canal is completed, were estimated by flow-net analysis. Variation in aquifer transmissivity was determined by calculating transmissivity in 25 different flow cells surrounding Silver Springs. Transmissivity in the 25 cells averages about 15,600,000 gpd/ft [2,090,000 ft2/day (feet squared)], but transmissivity in the six cells through which the Summit Pool passes ranges from 9,000,000 to 44,000,000 gpd/ft (1,210,000 to 5,900,000 ft2/day). Transmissivity was used to compute static stage of the Summit Pool under given ground-water level conditions. Had the canal existed in May 1968 and had the stage of Eureka Pool been held at 36 feet at the time, the static stage in Summit Pool would have been about 42.1 feet above mean sea level. Thus, a conceptual model of the changes in the potentiometric surface wrought by the finished canal was drawn, and zones of ground-water inflow and outflow were delineated. Most outflow from the Summit Pool to the aquifer should be limited to one 4-mile-long zone along the north side of the pool, about 5 miles south of Silver Springs. It is estimated that a water volume equivalent to about 8 percent of the daily flow of Silver Springs will enter the Summit Pool each day from the southern one-third of the Silver Springs drainage area. A like amount will reenter the aquifer at the main zone of outflow and move toward Silver Springs at an estimated average velocity of about 200 feet per day, if something close to the natural static stage of the pool is maintained by return pumpage of the lockage losses. At a velocity of 200 feet per day, water from the Summit Pool would discharge at Silver Springs about 140 days later. However, any estimate of velocity in the highly cavernous limestone aquifer in the area should be used with caution, because difficult to measure changes in porosity and thickness of major zones of flow may cause large variations in velocity. If all lockage losses are returned to the Summit Pool by pumping from Eureka Pool, no net loss from the Silver Springs drainage area, except for some evaporation from the water surface in the canal and possible leakage around locks, will result from canal operations. The zone of outflow from the Summit Pool to the aquifer will be in a natural potentiometric trough, and the zone of inflow will be in a potentiometric ridge area. The equilibrium water level in the pool will tend to be about 1 foot higher than the altitude of the lowest level in the pre-canal potentiometric trough, and about 2 feet lower than the highest level on the pre-canal potentiometric ridge. West of the Silver Springs drainage area just east of Dunnellon Lock, in the area of a local potentiometric high, the water level in the Summit Pool is expected to be about 15 feet below the natural potentiometric surface. In most areas 2 to 3 miles away from the Summit Pool, effects of the canal on the natural potentiometric surface should be slight. The stage of the Summit Pool, judging from the 36-year record for ground-water level changes and the anticipated indirect effect of the controlled stage in Eureka Pool, should have a maximum of about 10.5 feet with a maximum water level of about 51.5 feet above mean sea level and a minimum of about 41.0 feet above mean sea level. Of particular importance in the Summit Pool is an implementation of well planned construction and operational procedures designed to minimize risks of ground-water contamination.

Florida↗
USGS2024

Methodology for inclusion of produced and stored carbon dioxide in the U.S. Geological Survey Federal lands greenhouse gas inventory

The U.S. Geological Survey (USGS) has developed two new carbon dioxide (CO2) emissions and sequestration accounting methods for use in future reports. The first method is a Federal lease-produced CO2 emissions calculation for an update of the report, “Federal Lands Greenhouse Gas Emissions and Sequestration in the United States.” The methodology to incorporate Federal lease CO2 production emissions into the updated report relies on CO2 sales royalty data from the Office of Natural Resources Revenue (ONRR). The end usage points for the gas include enhanced oil recovery with CO2 (CO2-EOR), food and beverage, and chemical production. CO2-EOR is the main end point for natural CO2 production in the United States; it accounted for 94% of usage in 2022 [1]. Federal lands emissions from this sector are estimated at 460 metric tons of CO2 in 2022, a very small amount relative to most other Federal lands emissions sector estimates. The second new method, planned for a separate report, is a calculation of the geologic storage of CO2 on Federal lands. The second method estimates the CO2 stored under Federal surface lands and documents Federal climate change mitigation efforts. Currently, there is no storage of CO2 at an industrial level on Federal lands, however multiple proposals and projects are planned. This method was developed on non-Federal lands datasets in an effort to prepare for when these activities on Federal lands will require accounting. National estimates for CO2 geologic storage using this method, but without a Federal lands filtering step, totaled 8.0 million metric tons (Mt) in 2022. The two methods described here are new benchmark methods in a collection of accounting procedures to document the current state of greenhouse gas emissions and their storage on Federal lands. These benchmarks can then be used to measure any subsequent changes in emissions from or carbon storage beneath Federal lands. While the magnitude of the values is currently non-existent to small, emissions mitigation goals established by decision makers indicate that these values will grow, and their documentation will take on greater value and use.

continental United States↗
USGS2026

Uncertainty quantification of geologic energy storage in depleted gas reservoirs using material balance equations embedded in a hierarchical errors-in-variables model

The storage potential for gas in geologic settings, such as depleted hydrocarbon reservoirs and solution-mined salt caverns, is becoming salient to future energy infrastructure planning. Technologies such as carbon capture, utilization, and storage, carbon dioxide-enhanced oil recovery, and natural gas and hydrogen storage help meet growing energy demands, reduce carbon emissions to meet climate goals, and provide energy security amid geopolitical uncertainties. Therefore, estimates of underground gas storage capacity could be useful for efficiently navigating the energy transitions. Material balance is a fundamental method in reservoir engineering for estimating original gas in place and potential storage capacity at the scale necessary for national assessments of subsurface pore space resources. However, the deterministic method cannot accommodate multiple data sources or quantify uncertainty in predictions. In this study, a method that embeds material balance equations within a hierarchical errors-in-variables model is proposed which allows the estimation of the distributions of reservoir properties needed for assessments. Uncertainties associated with these reservoir properties have traditionally been expert-elicited, whereas the uncertainty estimates from the proposed models are data-driven. Capacity and uncertainty estimates can be used in a probabilistic resource assessment, supplementing information traditionally used by assessors or even replacing this expert elicitation step when data are unavailable. Various regression models are compared in a case study of the Michigan Basin, a large contributor to the United States’ current natural gas storage capacity. In particular, errors-in-variables models help ameliorate regression dilution and can quantify uncertainty in predictions of pressure in addition to storage capacity. Overfitting is addressed by quantifying generalization error and model averaging in simple and stratified cross-validation against reported working gas capacity, representing the varying quality and quantity of available data. Incorporating a statistical framework into existing numerical methods in reservoir engineering can improve the quality of estimation, and in particular, this method brings rigor to uncertainty quantification as part of a larger effort by the U.S. Geological Survey to assess domestic energy gas storage resources in depleted hydrocarbon reservoirs.

Mathematical Geosciences↗
USGS2025

Hydrogeologic characterization of the Cahuilla Valley and Terwilliger Valley Groundwater Basins, Riverside County, California

The relation between the groundwater and the amount of natural recharge to the Cahuilla Valley and Terwilliger Valley groundwater basins is not well understood. During the 20th century, the reliance on groundwater near Anza, California, used for agricultural, domestic, and municipal reasons has increased, and there is the potential for changes in groundwater availability related to climate change. Several types of existing data were evaluated, and new data were collected for this study, with the goal of characterizing the region’s hydrogeology. The study’s scope included constructing a geologic framework model to show where the groundwater-bearing units are present and their relation to each other, estimating the major components of the groundwater budget, and understanding local short-term and regional long-term groundwater flow and how that has changed since the early 1900s. Two electrical resistivity tomography surveys were done in the Durasno Valley about 2,150 feet apart to identify the thickness of the alluvium, its horizontal extent, and the depth-to-basement along two profiles perpendicular to Cahuilla Creek. The subsurface sediments were mostly horizontally layered and the transitional boundary between the alluvium and basement was thinner and shallower along the upgradient profile where the depth-to-basement was about 70 feet below land surface; the depth-to-basement at the downgradient profile was more than about 140 feet below land surface. The results from the surveys were used to place four monitoring wells at two sites along the survey profiles. Artesian flow from the deepest well at the downgradient site indicated that the decomposed and competent basement likely contributed some groundwater to the overlying alluvium, laterally, from below, or both. A digital three-dimensional geologic framework model was constructed using EarthVision software to represent the subsurface geometry of the alluvium, decomposed basement, and competent basement. Maps and cross sections of the modeled thicknesses of the alluvium and decomposed basement, and the modeled elevation of the top of the competent basement, were made to show the subsurface geometry of vertical faults, selected wells, and the groundwater-bearing units. Because natural recharge is related to the variable cycles of precipitation, estimates are difficult to quantify. Recharge and runoff have extreme interannual variability in the study area; recharge and runoff can be sporadic, and a substantive amount may not occur in some years. Estimates of recharge from a previous study and the regional-scale Basin Characterization Model for California for four different periods ranged from 3,800 acre-feet/year for 1897–1947 to 5,900 acre-feet/year for 1971–2000. Potential recharge from the disposal of domestic septic systems may have been as much as 500 acre-feet in 2020. It was estimated that between about 400 and 2,400 acre-feet/year of groundwater is lost through evapotranspiration by vegetation and evaporation from open water bodies, but the main source of discharge is through pumpage, mainly used for agriculture from the alluvium in the Cahuilla Valley and Terwilliger Valley groundwater basins. The estimated total pumpage for 1991–2021 ranged from about 1,140 acre-feet in 2019 to about 3,450 acre-feet in 1994. When summed, the cumulative amount of estimated pumpage between 1991 and 2021 was about 81,400 acre-feet. The general direction of groundwater flow is from the northeast along the San Jacinto fault zone at the headwaters of Cahuilla and Hamilton Creeks, to the surface-water outlets at the west and southeast parts of the study area. Groundwater-level data from the 1950s and earlier indicate that there was a natural groundwater divide between the Cahuilla Valley and Terwilliger Valley groundwater basins, but the changing magnitude and extent of the groundwater depressions caused by pumping since about 1950 indicate that the location of the natural groundwater boundary between the Cahuilla Valley and Terwilliger Valley groundwater basins has migrated over time. Flow from the upper to the lower parts of the Cahuilla Valley groundwater basin roughly follows the course of Cahuilla Creek through the narrow Durasno Valley where an estimated volume of flow in April 2019 was about 10–150 acre-feet/year. Short-term trends in groundwater levels, particularly in wells where groundwater is shallow and in the basement unit, show how some areas respond quickly to recharge and discharge. Wells located further to the east within the Cahuilla Valley groundwater basin in the alluvium show much less of a response to recharge events; areas of sustained pumpage from the alluvium, primarily for agriculture, show long-term declines in groundwater levels and generally do not show the effects of storm events or recent runoff. Groundwater levels in wells that are farthest from where most of the recharge occurs and where pumping has been the greatest, had some of the largest long-term groundwater-level declines at a rate of about 0.8 foot/year between 1971 and 2021.

California↗
USGS2024

Layered intrusions in the Precambrian: Observations and perspectives

Layered intrusions are plutonic bodies of cumulates that form by the crystallization of mantle-derived melts. These intrusions are characterized by igneous layering distinguishable by shifts in mineralogy, texture, or composition. Layered intrusions have been fundamental to our understanding of igneous petrology; however, it is their status as important repositories of critical metals – such as platinum-group elements, chromium, and vanadium – that has predominantly driven associated research in recent decades. Many layered intrusions were emplaced during the Precambrian, predominantly at the margins of ancient cratons during intervals of supercontinent accretion and destruction. It appears that large, layered intrusions require rigid crust to ensure their preservation, and their geometry and layering is primarily controlled by the nature of melt emplacement. Layered intrusions are best investigated by integrating observations from various length-scales. At the macroscale, intrusion geometries can be discerned, and their presence understood in the context of the regional geology. At the mesoscale, the layering of an intrusion may be characterized, intrusion-host rock contact relationships studied, and the nature of stratiform mineral occurrences described. At the microscale, the mineralogy and texture of cumulate rocks and any mineralization are elucidated, particularly when novel microtextural and mineral chemical datasets are integrated. For example, here we demonstrate how mesoscale observations and microscale datasets can be combined to understand the petrogenesis of the perplexing snowball oiks outcrop located in the Upper Banded Series of the Stillwater Complex. Our data suggest that the orthopyroxene oikocrysts did not form in their present location, but rather formed in a dynamic magma chamber where crystals were transported either by convective currents or within crystal-rich slurries. Critical metals may be transported to the level of a nascent intrusion as dissolved components in the melt. Alternatively, ore minerals are entrained from elsewhere in a plumbing system, potentially facilitated by volatile-rich phases. There are many ore-forming processes propounded by researchers to occur at the level of emplacement; however, each must address the arrival of the ore mineral, its concentration of metals, and its accumulation into orebodies. In this contribution, several of these processes are described as well as our perspectives on the future of layered intrusion research.

Precambrian Research↗
USGS2026

Decadal trends in the quality of groundwater used for public drinking-water supply in California, 2004–2023, California groundwater ambient monitoring and assessment program, priority basin project

This study provides a comprehensive assessment of decadal changes in the quality of groundwater used for public drinking-water supply at 444 monitoring sites across California during 2004–2023. We assessed decadal step trends in groundwater quality for 145 water-quality constituents and geochemical indicators statewide and across geographic and land-use based network groups. We evaluated the statistical significance of directional changes (predominant increase or decrease of constituent concentrations) and the magnitude of those changes across all network groups. Uranium showed the most widespread directional and high-magnitude increases of all constituents with regulatory benchmarks statewide, particularly in the agriculture-dominated Central Valley as well as urban- and desert-dominated regions of Southern California. Fluoride and perchlorate showed the most widespread directional and high-magnitude decreases of all constituents with regulatory benchmarks statewide, which were also most pronounced in Southern California. Although arsenic and nitrate did not often register significant directional changes across network groups, they showed widespread, high-magnitude changes in both directions (increase and decrease) at levels often exceeding 10 percent of respective regulatory benchmarks statewide. Triazine herbicides (atrazine and simazine) and the gasoline oxygenate methyl tert-butyl ether (MTBE) showed significant directional decreases statewide, but not at levels considered to be of high magnitude compared to respective regulatory benchmarks. We observed significant directional and high-magnitude increases of total dissolved solids (TDS) statewide, which were most pronounced in agricultural areas. Analysis of explanatory geochemical indicators indicated that prevalent statewide increases of alkalinity and calcium were the predominant components of the observed statewide increases in TDS by mass. Widespread increases in groundwater alkalinity and calcium across agricultural and urban areas may be related, in part, to warm-season irrigation and other anthropogenic factors that have shifted soil weathering dynamics over the long term. Increasing alkalinity concentrations were related to increasing uranium concentrations, particularly in areas with aquifer materials derived from granitic rocks. Conversely, increasing calcium concentrations were related to decreasing fluoride concentrations, particularly in areas where fluoride occurred naturally at elevated concentrations. Decrease of perchlorate, triazine herbicides, and MTBE are likely related to decreased anthropogenic source inputs over time and natural attenuation in aquifers.

EarthArXiv↗
USGS2024

Complex landslide patterns explained by local intra-unit variability of stratigraphy and structure: Case study in the Tyee Formation, Oregon, USA

Lithology and geologic structure are important controls on landslide susceptibility and are incorporated into many regional landslide hazard models. Typically, metrics for mapped geologic units are used as model input variables and a single set of values for material strength are assumed, regardless of spatial heterogeneities that may exist within a map unit. Here we describe how differences in bedding thickness, grain size, inferred uniaxial compressive strength, and bedding dip control the inherent susceptibility of slopes to deep-seated failure within a single mapped geologic unit - the Tyee Formation of Oregon, USA. The Tyee, which covers over 15,000 km2 and underlies much of the Oregon Coast Range, comprises gently folded alternating beds of sandstone and siltstone deposited as turbidites, forming a 2-km thick Eocene submarine fan which has been uplifted and exhumed through the Cenozoic. Deep-seated landslides are widespread in the Tyee, but form a complex spatial pattern such that landslide density ranges from 0 to 24% of the total landscape area. These slides are often extensive and sufficiently deep to reduce local hillslope gradients, resulting in a strong negative correlation between landslide density and mean local slope. Mean annual precipitation and predicted strong ground motions from Cascadia earthquake scenarios also fail to explain the spatial distribution of deep-seated landslides. Consequently, landslide stability models, which are strongly influenced by landscape slope, pore-water pressure, and seismic acceleration, yield landslide susceptibility maps which are broadly anti-correlated with mapped deep-seated landslide density. Through a multivariable linear regression model, we show that much of the variance in deep-seated landslide density can be explained by variability of intra-unit stratigraphic and structural characteristics, which we measure at 128 sites across two study areas totaling ∼3000 km2. Our results suggest bedding dip is only weakly correlated to landslide density, but strongly influences landslide failure style. Subtle increases in bedding dip, even in the gently folded Tyee Formation, result in a substantially higher likelihood of a landslide being cataclinal, or parallel to bedding. Overall, we find a slight majority of landslides fail within these cataclinal slopes, and that these landslides tend to be larger than non-cataclinal landslides. We also show that the lithological and structural properties that influence landslide susceptibility are distinct for these two populations of landslides. Our results demonstrate how localized, intra-unit, geologic variability can exert strong control on landslide susceptibility and failure style. This suggests that in some locations, landslide hazard models could be significantly improved by incorporating detailed, spatially variable, geologic properties rather than relying solely on generalized geologic map units.

Oregon↗
USGS2025

Cooling perspectives on the risk of pathogenic viruses from thawing permafrost

Climate change is inducing wide-scale permafrost thaw in the Arctic and subarctic, triggering concerns that long-dormant pathogens could reemerge from the thawing ground and initiate epidemics or pandemics. Viruses, as opposed to bacterial pathogens, garner particular interest because outbreaks cannot be controlled with antibiotics, though the effects can be mitigated by vaccines and newer antiviral drugs. To evaluate the potential hazards posed by viral pathogens emerging from thawing permafrost, we review information from a diverse range of disciplines. This includes efforts to recover infectious virus from human remains, studies on disease occurrence in polar animal populations, investigations into viral persistence and infectivity in permafrost, and assessments of human exposure to the enormous viral diversity present in the environment. Based on currently available knowledge, we conclude that the risk posed by viruses from thawing permafrost is no greater than viruses in other environments such as temperate soils and aquatic systems.

mSystems↗
USGS2025

Simulating human behavior under earthquake early warning

Earthquakes are a rapid-onset hazard where advance planning and learning plays a key role in mitigating injuries and death to individuals. Recent advances in earthquake detection have resulted in the development of earthquake early warning (EEW) systems. These systems can provide advance warning to predetermined geographic regions that an earthquake is in progress, which may result in individuals receiving warning seconds before significant shaking is felt at their location. This additional time could allow individuals to take more effective protective actions during the immediate disaster. To demonstrate this, we created an agent-based simulation of a basic apartment that allowed us to randomly and repeatedly simulate an individual receiving and responding to an EEW message. The results of our preliminary simulation show that, in our study environment, earthquake early warning alerts have the potential to allow for sufficient time for individuals to take protective actions.

Washington↗
USGS2026

Decadal trends in the quality of groundwater used for public drinking-water supply in California, 2004–23, California Groundwater Ambient Monitoring and Assessment Program, Priority Basin Project

This study provides a comprehensive assessment of decadal changes in the quality of groundwater used for public drinking-water supply at 444 monitoring sites across California during 2004–23. We assessed decadal step trends in groundwater quality for 145 water-quality constituents and geochemical indicators statewide and across geographic and land-use based network groups. We evaluated the statistical significance of directional changes (predominant increase or decrease of constituent concentrations) and the magnitude of those changes across all network groups. Uranium showed the most widespread directional and high-magnitude increases of all constituents with regulatory benchmarks statewide, particularly in the agriculture-dominated Central Valley as well as urban-and desert-dominated regions of Southern California. Fluoride and perchlorate showed the most widespread directional and high-magnitude decreases of all constituents with regulatory benchmarks statewide, which were also most pronounced in Southern California. Although arsenic and nitrate did not often register significant directional changes across network groups, they showed widespread, high-magnitude changes in both directions (increase and decrease) at levels often exceeding 10 percent of respective regulatory benchmarks statewide. Triazine herbicides (atrazine and simazine) and the gasoline oxygenate methyl tert -butyl ether showed significant directional decreases statewide, but not at levels considered to be of high magnitude compared to respective regulatory benchmarks. We observed significant directional and high-magnitude increases of total dissolved solids statewide, which were most pronounced in agricultural areas. Analysis of explanatory geochemical indicators indicated that prevalent statewide increases of alkalinity and calcium were the predominant components of the observed statewide increases in total dissolved solids by mass. Widespread increases in groundwater alkalinity and calcium across agricultural and urban areas may be related, in part, to warm-season irrigation and other anthropogenic factors that have shifted soil weathering dynamics over the long term. Increasing alkalinity concentrations were related to increasing uranium concentrations, particularly in areas with aquifer materials derived from granitic rocks. Conversely, increasing calcium concentrations were related to decreasing fluoride concentrations, particularly in areas where fluoride occurred naturally at elevated concentrations. Decrease of perchlorate, triazine herbicides, and methyl tert -butyl ether are likely related to decreased anthropogenic source inputs over time and natural attenuation in aquifers.

California↗
USGS2024

Using the horizontal-to-vertical spectral ratio method to estimate thickness of the Barry Arm landslide, Prince William Sound, Alaska

Conducting detailed investigations of large landslides is difficult, especially in the subsurface, largely due to environmental factors such as steep slopes, difficult access, and numerous objective hazards. These factors have made it challenging to accurately estimate the depth to the failure surface of the Barry Arm landslide, a large (roughly 10 8 cubic meters), deep-seated bedrock landslide in Prince William Sound, Alaska, recognized in 2019. The landslide has exhibited accelerated movement in recent years and poses a potential tsunamigenic hazard if rapid failure occurs. Failure surface depth, equivalent to landslide thickness, is a necessary metric for landslide-volume calculations and associated tsunami wave models. In this report, we used seismic noise recorded by a seismometer located on the Barry Arm landslide in Alaska to calculate the horizontal-to-vertical spectral ratio (HVSR) to investigate the site fundamental frequency ( f 0 ) and depth of the failure surface. To ensure that observed peak frequencies in the spectral ratio were related to the underlying stratigraphy (and not caused by other noise sources like nearby glaciers, topographic resonance, weather, or human activities), we also calculated HVSRs using earthquake signals, HVSRs at other seismic stations within a 2.5-kilometer radius, and a standard spectral ratio between the landslide station and other sites. We observed multiple peaks in the landslide HVSR curves at 1.5 hertz (Hz), 4–5 Hz, and 7–11 Hz. The frequencies of these peaks were consistent at the landslide site through time and across methods and were dissimilar to those identified at other seismic stations in the area, making it unlikely the peaks were caused by local noise. Directional HVSRs calculated at 15-degree intervals showed amplification of the higher frequency peaks in the direction parallel to slip, indicating two-dimensional site effects. We used the distinct frequency peaks in the seismic record to develop a 4-layer conceptual model of the landslide wherein the top of the deepest layer represents the primary failure surface, or the boundary between damaged (mobile) and undamaged material. We inverted Rayleigh wave ellipticity curves within this 4-layer configuration with constraints on S-wave velocity and layer thickness based on analogous material properties identified in the literature. This was necessary absent any site-specific subsurface S-wave velocity data. The best-fitting models indicate a mean slope-normal depth to the failure surface of 188 (±9) meters (m), with additional stratigraphic boundaries at 4 and 20 m below ground surface, potentially representing layered motion. These results agree with and improve upon ranges estimated by previous studies and can support future modeling and assessment efforts at Barry Arm.

Alaska↗