Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Evolution and Development”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
USGS1989

Appalachian Piedmont landscapes from the Permian to the Holocene

Between the Potomac and Susquehanna Rivers and from the Blue Ridge to the Fall Zone, landscapes of the Piedmont are illustrated for times in the Holocene, Late Wisconsin, Early Miocene, Early Cretaceous, Late Triassic, and Permian. Landscape evolution took place in tectonic settings marked by major plate collisions (Permian), arching and rifting (Late Triassic) and development of the Atlantic passive margin by sea floor spreading (Early Cretaceous). Erosion proceeded concurrently with tectonic uplift and continued after cessation of major tectonic activity. Atlantic Outer Continental Shelf sediments record three major erosional periods: (1) Late Triassic-Early Jurassic; (2) Late Jurassic-Early Cretaceous; and (3) Middle Miocene-Holocene. The Middle Miocene-Holocene pulse is related to neotectonic activity and major climatic fluctuations. In the Piedmont upland the Holocene landscape is interpreted as an upland surface of low relief undergoing dissection. Major rivers and streams are incised into a landscape on which the landforms show a delicate adjustment to rock lithologies. The Fall Zone has apparently evolved from a combination of warping, faulting, and differential erosion since Late Miocene. The periglacial environment of the Late Wisconsin (and earlier glacial epochs) resulted in increased physical erosion and reduced chemical weathering. Even with lowered saprolitization rates, geochemical modeling suggests that 80 m or more of saprolite may have formed since Late Miocene. This volume of saprolite suggests major erosion of upland surfaces and seemingly contradicts available field evidence. Greatly subdued relief characterized the Early Miocene time, near the end of a prolonged interval of tropical morphogenesis. The ancestral Susquehanna and Potomac Rivers occupied approximately their present locations. In Early Cretaceous time local relief may have been as much as 900 m, and a major axial river draining both the Piedmont and Appalachians flowed southeast past Baltimore. The Late Triassic landscape was influenced by rift basin development. Streams drained into a hydrologically closed basin: no through-flowing rivers seem to have been present. A limestone escarpment along the Blue Ridge may have existed as a consequence of a semi-arid climate. The Permian may have been a time of Himalayan-like mountains and mountain glaciers. Streams (and glaciers) generally flowed southwest and west. ?? 1989.

Geomorphology↗
USGS2015

Coevolution of bed surface patchiness and channel morphology: 1. Mechanisms of forced patch formation

Riverbeds frequently display a spatial structure where the sediment mixture composing the channel bed has been sorted into discrete patches of similar grain size. Even though patches are a fundamental feature in gravel bed rivers, we have little understanding of how patches form, evolve, and interact. Here we present a two-dimensional morphodynamic model that is used to examine in greater detail the mechanisms responsible for the development of forced bed surface patches and the coevolution of bed morphology and bed surface patchiness. The model computes the depth-averaged channel hydrodynamics, mixed-grain-size sediment transport, and bed evolution by coupling the river morphodynamic model Flow and Sediment Transport with Morphological Evolution of Channels (FaSTMECH) with a transport relation for gravel mixtures and the mixed-grain-size Exner equation using the active layer assumption. To test the model, we use it to simulate a flume experiment in which the bed developed a sequence of alternate bars and temporally and spatially persistent forced patches with a general pattern of coarse bar tops and fine pools. Cross-stream sediment flux causes sediment to be exported off of bars and imported into pools at a rate that balances downstream gradients in the streamwise sediment transport rate, allowing quasi-steady bar-pool topography to persist. The relative importance of lateral gravitational forces on the cross-stream component of sediment transport is a primary control on the amplitude of the bars. Because boundary shear stress declines as flow shoals over the bars, the lateral sediment transport is increasingly size selective and leads to the development of coarse bar tops and fine pools.

Journal of Geophysical Research F: Earth Surface↗
USGS1990

Sedimentary evolution of the Pliocene and Pleistocene Ebro margin, northeastern Spain

The Pliocene and Pleistocene deposits of the Spanish Ebro margin overlie a regional unconformity and contain a major disconformity. These unconformities, named Reflector M and Reflector G, mark the bases of two seismic sequences. Except for close to the upper boundary where a few small channel deposits are recognized, the lower sequence lacks channels. The upper sequence contains nine channel-levee complexes as well as base-of-slope aprons that represent the proximal part of the Valencia turbidite system. Diverse geometries and variations in seismic units distinguish shelf, slope, base-of-slope and basin-floor facies. Four events characterize the late Miocene to Pleistocene evolution of the Ebro margin: (a) formation of a paleodrainage system and an extensive erosion-to-depositional surface during the latest Miocene (Messinian), (b) deposition of hemipelagic units during the early Pliocene, (c) development of canyons during the late Pliocene to early Pleistocene, and (d) deposition of slope wedges, channel-levee complexes, and base-of-slope aprons alternating with hemipelagic deposition during the Pleistocene. Sea-level fluctuations influenced the evolution of the sedimentary sequences of the Ebro margin, but the major control was the sediment supply from the Ebro River.

Marine Geology↗
USGS2014

Development of a generic auto-calibration package for regional ecological modeling and application in the Central Plains of the United States

Process-oriented ecological models are frequently used for predicting potential impacts of global changes such as climate and land-cover changes, which can be useful for policy making. It is critical but challenging to automatically derive optimal parameter values at different scales, especially at regional scale, and validate the model performance. In this study, we developed an automatic calibration (auto-calibration) function for a well-established biogeochemical model—the General Ensemble Biogeochemical Modeling System (GEMS)-Erosion Deposition Carbon Model (EDCM)—using data assimilation technique: the Shuffled Complex Evolution algorithm and a model-inversion R package—Flexible Modeling Environment (FME). The new functionality can support multi-parameter and multi-objective auto-calibration of EDCM at the both pixel and regional levels. We also developed a post-processing procedure for GEMS to provide options to save the pixel-based or aggregated county-land cover specific parameter values for subsequent simulations. In our case study, we successfully applied the updated model (EDCM-Auto) for a single crop pixel with a corn–wheat rotation and a large ecological region (Level II)—Central USA Plains. The evaluation results indicate that EDCM-Auto is applicable at multiple scales and is capable to handle land cover changes (e.g., crop rotations). The model also performs well in capturing the spatial pattern of grain yield production for crops and net primary production (NPP) for other ecosystems across the region, which is a good example for implementing calibration and validation of ecological models with readily available survey data (grain yield) and remote sensing data (NPP) at regional and national levels. The developed platform for auto-calibration can be readily expanded to incorporate other model inversion algorithms and potential R packages, and also be applied to other ecological models.

Ecological Informatics↗
USGS1980

Rubidium-strontium geochronology and plate-tectonic evolution of the southern part of the Arabian Shield

Rubidium-strontium studies of Precambrian volcanic and plutonic rocks of the Arabian Shield document an early development of the Arabian craton between 900 and 680 m.y. (million years) ago. Geologic studies indicate an island-arc environment characterized by andesitic (dioritic) magmas, volcaniclastic sedimentation, rapid deposition, and contemporaneous deformation along north or northwest-trending axes. Magmatic trends show consistent variation in both composition and geographic location as a function of age. The oldest units belong to an assemblage of basaltic strata exposed in western Saudi Arabia that yield an age of 1165:!:110 m.y. The oldest andesitic strata studied yield an age of 912:!:76 m.y. The earliest plutonic units are diorite to trondhjemite batholiths that range from 800 to 9,00 m.y. in age and ,occur along the western and southern parts of Saudi Arabia. Younger plutonic units, 680 to 750 m.y. in age, range from quartz diorite to granodiodte and become more abundant in the central and northeastern parts of the Arabian Shield. Initial 'Sr/ 86 Sr ratios for both dioritic groups range from 0.7023 to 0.7030 and average 0.7027. The absence of sialic detritus in sedimentary units and the evidence for an island-arc environment suggest the early development of the Arabian craton at a convergent plate margin between plates of oceanic lithosphere. Active subduction apparently extended from at least 900 m.y. to about 680 m.y. Subsequent to this subduction-related magmatism and tectonism, called the Hijaz tectonic cycle, the Arabian craton was sutured to the late Precambrian African plate in a collisional event. This period of orogeny, represented in Arabia and eastern Africa by the Mozambiquian or Pan-African event, extended from some time before 650 m.y. to at least 540 m.y. and perhaps 520 m.y. B.P. Although the tectonic processes of subduction and continental collision during the 900+ to 500-m.y. period require similar directions of plate convergence, the differences in magmatic and tectonic. styles of Hijaz orogenesis from those of the Pan-African and the temporal break between them in much of the southern part of the Arabian Shield support division into at least two events. As defined by the ages of major plutonic units, the axis of magmatic and tectonic activity migrated eastward or northeastward during the Hijaz cycle, the predominantly dioritic plutonic rocks becoming younger and more siliceous to the east. Granodiorite to granite pl}.1tonism of the Pan-African event, however, shows no geographic bias, being distributed throughout the Arabian Shield. Although the Hijaz diorites and Pan-African granitic rocks exhibit strong contrasts in composition and age differences as great as 250 m.y. in the westernmost parts of the area, the two groups are less distinct compositionally and nearly the same age in the eastern part.

Professional Paper↗
USGS2006

Evolution of the CD4 family: teleost fish possess two divergent forms of CD4 in addition to lymphocyte activation gene-3

The T cell coreceptor CD4 is a transmembrane glycoprotein belonging to the Ig superfamily and is essential for cell-mediated immunity. Two different genes were identified in rainbow trout that resemble mammalian CD4. One (trout CD4) encodes four extracellular Ig domains reminiscent off mammalian CD4, whereas the other (CD4REL) codes for two Ig domains. Structural motifs within the amino acid sequences suggest that the two Ig domains of CD4REL duplicated to generate the four-domain molecule of CD4 and the related gene, lymphocyte activation gene-3. Here we present evidence that both of these molecules in trout are homologous to mammalian CD4 and that teleosts encode an additional CD4 family member, lymphocyte activation gene-3, which is a marker for activated T cells. The syntenic relationships of similar genes in other teleost and non-fish genomes provide evidence for the likely evolution of CD4-related molecules in vertebrates, with CD4REL likely representing the primordial form in fish. Expression of both CD4 genes is highest in the thymus and spleen, and mRNA expression of these genes is limited to surface IgM- lymphocytes, consistent with a role for T cell functionality. Finally, the intracellular regions of both CD4 and CD4REL possess the canonical CXC motif involved in the interaction off CD4 with p56LCK, implying that similar mechanisms for CD4 + T cell activation are present in all vertebrates. Our results therefore raise new questions about T cell development and functionality in lower vertebrates that cannot be answered by current mammalian models and, thus, is of fundamental importance for understanding the evolution of cell-mediated immunity in gnathosomes. Copyright ?? 2006 by The American Association of Immunologists, Inc.

Journal of Immunology↗
USGS1992

Development of spatial data guidelines and standards: spatial data set documentation to support hydrologic analysis in the U.S. Geological Survey

Spatial data analysis has become an integral component in many surface and sub-surface hydrologic investigations within the U.S. Geological Survey (USGS). Currently, one of the largest costs in applying spatial data analysis is the cost of developing the needed spatial data. Therefore, guidelines and standards are required for the development of spatial data in order to allow for data sharing and reuse; this eliminates costly redevelopment. In order to attain this goal, the USGS is expanding efforts to identify guidelines and standards for the development of spatial data for hydrologic analysis. Because of the variety of project and database needs, the USGS has concentrated on developing standards for documenting spatial sets to aid in the assessment of data set quality and compatibility of different data sets. An interim data set documentation standard (1990) has been developed that provides a mechanism for associating a wide variety of information with a data set, including data about source material, data automation and editing procedures used, projection parameters, data statistics, descriptions of features and feature attributes, information on organizational contacts lists of operations performed on the data, and free-form comments and notes about the data, made at various times in the evolution of the data set. The interim data set documentation standard has been automated using a commercial geographic information system (GIS) and data set documentation software developed by the USGS. Where possible, USGS developed software is used to enter data into the data set documentation file automatically. The GIS software closely associates a data set with its data set documentation file; the documentation file is retained with the data set whenever it is modified, copied, or transferred to another computer system. The Water Resources Division of the USGS is continuing to develop spatial data and data processing standards, with emphasis on standards needed to support hydrologic analysis, hydrologic data processing, and publication of hydrologic thermatic maps. There is a need for the GIS vendor community to develop data set documentation tools similar to those developed by the USGS, or to incorporate USGS developed tools in their software.

Conference Paper↗
USGS2001

Analytical data for waters of the Harvard Open Pit, Jamestown Mine, Tuolumne County, California, March 1998-September 1999

The Jamestown mine is located in the Jamestown mining district in western Tuolumne County, California (see Fig. 1). This district is one of many located on or near the Melones fault zone, a major regional suture in the Sierra Nevada foothills. The districts along the Melones fault comprise the Mother Lode gold belt (Clark, 1970). The Harvard pit is the largest of several open pits mined at the Jamestown site by Sonora Mining Corporation between 1986 and 1994 (Fig. 2; Algood, 1990). It is at the site of an historical mine named the Harvard that produced about 100,000 troy ounces of gold, mainly between 1906 and 1916 (Julihn and Horton, 1940). Sonora Mining mined and processed about 17,000,000 short tons of ore, with an overall stripping ratio of about 4.5:1, yielding about 660,000 troy ounces of gold (Nelson and Leicht, 1994). Most of this material came from the Harvard pit, which attained dimensions of about 2700 ft (830 m) in length, 1500 ft (460 m) in width, and 600 ft (185 m) in depth. The bottom of the pit is at an elevation of 870 ft (265 m). Since mining operations ceased in mid-1994, the open pit has been filling with water. As of November, 2000, lake level had reached an elevation of about 1170 ft (357 m). Water quality monitoring data gathered after mine closure showed rising levels of arsenic, sulfate, and other components in the lake, with particularly notable increases accompanying a period of rapid filling in 1995 (County of Tuolumne, 1998). The largest potential source for arsenic in the vicinity of the Harvard pit is arsenian pyrite, the most abundant sulfide mineral related to gold mineralization. A previous study of weathering of arsenian pyrite in similarly mineralized rocks at the Clio mine, in the nearby Jacksonville mining district, showed that arsenic released by weathering of arsenian pyrite is effectively attenuated by adsorption on goethite or coprecipitation with jarosite, depending upon the buffering capacity of the pyrite-bearing rock (Savage and others, 2000). Although jarosite would be expected to dissolve in water having the composition of the developing pit lake, iron oxyhydroxide species (ferrihydrite and goethite) would be stable, and strong partitioning of arsenic onto suspended particles or bottom sediments containing these iron phases would be expected. Arsenic release to the lake would not be expected until stratification develops, producing a reducing, non-circulating hypolimnion in which the iron phases would be destroyed by dissolution. The fact that arsenic concentrations increased rapidly before the pit lake was deep enough to stratify shows that arsenic may not be attenuated in the ways that the earlier Clio mine area study indicated, and suggested that our understanding of release and transport of arsenic in this environment is incomplete. Therefore, in 1997 we decided to study the chemical evolution of the Harvard pit lake as part of a project on environmental impacts of gold mining in the Sierra Nevada, and in early 1998 we developed a cooperative study with several of the investigators in the Stanford University Department of Geological and Environmental Sciences who had done the Clio study. The U.S. Geological Survey portion of the project has been funded by the Mineral Resources Program. It is anticipated that a better understanding of the release and transport of arsenic into the Harvard pit lake and its accumulation there will contribute to more accurate predictions of arsenic release from weathering of sulfide-bearing rocks exposed by mining or other activities or events, and to better forecasts of pit lake evolution in this and similar environments, leading to more effective monitoring and mitigation strategies. An accurate predictive model is needed for the Harvard pit lake to forecast trends in metal concentrations, particularly arsenic, and also concentrations of major cations and anions. As the lake approaches pre-mining groundwater levels the lake water could move down the hydrologic gradient to the southeast into domestic wells, and could also affect the surface water of Woods Creek (see Figures 1-3). This report presents data for water samples collected from March, 1998 through September, 1999. Selected preliminary data for the pit lake for the 1998 calendar year have been reported (Savage and others, 2000).

California↗
USGS2019

Insights into pāhoehoe lava emplacement using visible and thermal structure-from-motion photogrammetry

We present the evolution over 3 months of a 2016–2017 pāhoehoe flow at Kīlauea as it changed from a narrow sheet flow into a compound lava field fed by a stable system of tubes. The portion of the flow located on Kīlauea's coastal plain was characterized using helicopter‐based visible and thermal structure‐from‐motion photogrammetry to construct a series of georeferenced digital surface models and thermal maps on eight different days. Results reveal key influences on the emplacement and evolution of such long‐lived pāhoehoe flows. This region of the flow grew by ~12 × 10 6 m 3 with a near‐constant time‐average discharge rate of 1.2–2.7 m 3 /s. The development of two tube systems is captured and shows an initial nascent tube enhanced by a narrow topographic confinement, which later inflated and created a topographic inversion that modulated the emplacement of a second flow lobe with its own tube system. The analysis of breakouts at various stages of the field's life suggests that the evolution of the thermal and morphological properties of the flow surface reflect its maturity. Thermal properties of breakouts were used to expand the empirical relationship of breakout cooling to longer timescales. This study contributes to the long‐term development and validation of more accurate predictive models for pāhoehoe, required during the management of long‐lasting lava flow crises in Hawai'i and elsewhere.

Hawaii↗
USGS2018

Groundwater flow and heat transport for systems undergoing freeze-thaw: Intercomparison of numerical simulators for 2D test cases

In high-elevation, boreal and arctic regions, hydrological processes and associated water bodies can be strongly influenced by the distribution of permafrost. Recent field and modeling studies indicate that a fully-coupled multidimensional thermo-hydraulic approach is required to accurately model the evolution of these permafrost-impacted landscapes and groundwater systems. However, the relatively new and complex numerical codes being developed for coupled non-linear freeze-thaw systems require verification. This issue is addressed by means of an intercomparison of thirteen numerical codes for two-dimensional test cases with several performance metrics (PMs). These codes comprise a wide range of numerical approaches, spatial and temporal discretization strategies, and computational efficiencies. Results suggest that the codes provide robust results for the test cases considered and that minor discrepancies are explained by computational precision. However, larger discrepancies are observed for some PMs resulting from differences in the governing equations, discretization issues, or in the freezing curve used by some codes.

Advances in Water Resources↗
USGS2022

Great expectations for earthquake early warnings on the United States West Coast

In October 2019, California became the first state in the United States to fully activate a public earthquake early warning system—ShakeAlert®—managed by the U.S. Geological Survey. The system was subsequently rolled out in March 2021 in Oregon and May 2021 in Washington. Earthquake early warning (EEW) systems can provide seconds of notice to people and technological systems that shaking is imminent, but their effectiveness depends on recipients’ expectations and actions as well as technical performance. To better understand these dependencies, we surveyed representative samples of adults in California (N = 1219), Oregon (N = 1020), and Washington (N = 1037) in February 2021. Most respondents had experienced earthquakes, but few had lived through violent shaking; most had not followed protective action guidance to Drop, Cover, and Hold On (DCHO) in earthquakes; and most reported no personal or social harm from prior earthquakes. Nevertheless, expectations and perceived usefulness of EEW were high, and higher still for those who expected alerts to be accurate and easy to use, expressed tolerance of missed and erroneous warnings, and expected to be affected by a damaging earthquake in their lifetime. Results suggest opportunities to better align public preferences and expectations with ShakeAlert operations. For example, some respondents preferred lower alerting thresholds than those proposed by government and scientists. Moreover, reported tolerance of warning errors was widespread, but respondents wanted explanations quickly, suggesting a need to further develop post-alert messaging. Findings from this study should be informative for future research on the co-evolution of experiences and expectations with EEW systems.

California, Oregon, Washington↗
USGS2002

Status and opportunities for genomics research with rainbow trout

The rainbow trout (Oncorhynchus mykiss) is one of the most widely studied of model fish species. Extensive basic biological information has been collected for this species, which because of their large size relative to other model fish species are particularly suitable for studies requiring ample quantities of specific cells and tissue types. Rainbow trout have been widely utilized for research in carcinogenesis, toxicology, comparative immunology, disease ecology, physiology and nutrition. They are distinctive in having evolved from a relatively recent tetraploid event, resulting in a high incidence of duplicated genes. Natural populations are available and have been well characterized for chromosomal, protein, molecular and quantitative genetic variation. Their ease of culture, and experimental and aquacultural significance has led to the development of clonal lines and the widespread application of transgenic technology to this species. Numerous microsatellites have been isolated and two relatively detailed genetic maps have been developed. Extensive sequencing of expressed sequence tags has begun and four BAC libraries have been developed. The development and analysis of additional genomic sequence data will provide distinctive opportunities to address problems in areas such as evolution of the immune system and duplicate genes. ?? 2002 Elsevier Science Inc. All rights reserved.

Conference Paper↗
USGS2010

Paleozoic plate-tectonic evolution of the Tarim and western Tianshan Regions, western China

The plate-tectonic evolution of the Tarim basin and nearby western Tianshan region during Paleozoic time is reconstructed in an effort to further constrain the tectonic evolution of Central Asia, providing insights into the formation and distribution of oil and gas resources. The Tarim plate developed from continental rifting that progressed during early Paleozoic time into a passive continental margin. The Yili terrane (central Tianshan) broke away from the present eastern part of Tarim and became a microcontinent located somewhere between the Junggar ocean and the southern Tianshan ocean. The southern Tianshan ocean, between the Tarim craton and the Yili terrane, was subducting beneath the Yili terrane from Silurian to Devonian time. During the Late Devonian-Early Carboniferous, the Tarim plate collided with the Yili terrane by sinistral accretional docking that resulted in a late Paleozoic deformational episode. Intracontinental shortening (A-type subduction) continued through the Permian with the creation of a magmatic belt.

Tarim Region, Tianshan Region↗
USGS1994

Geology and geochemistry of Summitville, Colorado: An epithermal acid sulfate deposit in a volcanic dome

Geologic studies during recent open-pit mining at Summitville, Colorado, have provided new information on an epithermal acid sulfate Au-Ag-Cu deposit formed in a volcanic dome. Geologic mapping, geochemical studies of whole-rock samples from blast holes, and geologic and geochemical traverse studies refine the details of the evolution of the Summitville deposit. Six distinct events followed emplacement of the quartz latite volcanic dome and define the development of the Summitville deposit: (1) an early stage of acid sulfate alteration, (2) subsequent Cu sulfide and gold mineralization, (3) widespread hydrothermal brecciation, (4) volumetrically minor, base metal sulfide-bearing barite veining, (5) volumetrically minor, kaolinite matrix brecciation, and finally, (6) supergene oxidation. Events 1 and 2 were the most important for the formation of the Summitville deposit. Acid sulfate altered rock is primarily found in the quartz latite volcanic dome rock and consists of vuggy silica (central), quartz-alunite, quartz-kaolinite, argillic, and propylitic (distal) zones. Ore deposition (event 2) of enargite, luzonite, covellite, pyrite, native sulfur, marcasite, and minor sphalerite, native gold, + or - barite and galena overprinted the acid sulfate altered rocks. Events 3, 4, and 5 are geologically important but rarely formed units large enough to be considered mineable ore by open-pit mining. The final supergene oxidation event affected much of the near-surface portion of the deposit and leached copper and sulfide minerals forming oxide zones. Near-surface oxide zones contain the highest Au grades and decrease progressively with depth.Fractures were important fbr localizing both the acid sulfate altered rock and ore deposition at Summitville. Such fracture control is apparent despite a lack of distinct throughgoing open-space quartz veins; instead, laterally and vertically extensive ore zones are identified by their highly silicified character that can be traced laterally for up to 500 m and vertically up to 200 m. Ore zones strike parallel to regional faults related to rifting and basin and range development, suggesting that hydrothermal fluids followed preexisting fractures. Ore zones follow two northwest trends, a N 30 degrees W + or - 20 degrees trend, and a N 60 degrees W trend. Most fractures and faults in the open pit dip steeply from 65 degrees to vertical. Ore zones intersect near the center of the deposit to form a large zone approximately 150 by 400 m. Ore zones form a rough radial pattern located near the center of the deposit and a discontinuous arcuate feature on the northern side. This radial pattern, arcuate feature, and the intersection of ore zones near the center of the deposit are probably related to the intrusion of a porphyry below the deposit. The overall low Au-grade, high-tonnage character of the Summitville deposit is related to low permeability in the quartz latite volcanic dome rock and absence of well-developed open-space hydrothermal veins.Gold analyses of development drill holes and blast hole samples, in conjunction with geologic mapping in the open pit, indicate that vuggy silica, quartz-alunite, and quartz-kaolinite altered rock constitute most of the Au ore. Vuggy silica averaged 2.4 ppm Au, quartz-alunite averaged 1.2 ppm Au, and quartz-kaolinite averaged 0.86 ppm Au during open-pit mining. Grades for argillically altered rock were usually below the ore cutoff of 0.34 ppm Au. Propylitically altered rock rarely contained detectable Au concentrations (0.03 ppm Au) and constituted only waste rock. Although volumetrically minor, event 4 base metal sulfide-bearing barite veins and event 5 kaolinite matrix breccias contained high Au grades (up to about 800 ppm Au), producing approximately 5 to 15 percent of the total Au mined in the deposit.Geochemical studies of samples collected across traverses of altered and mineralized ore zones indicate that Te, Bi, and Pb are characteristic trace elements, in addition to Au, Ag, Cu, and As that are typical of acid sulfate mineral deposits. Anomalous Te is associated with Cu sulfides and gold in vuggy silica zones. Anomalous Bi and Pb concentrations correlate most consistently with quartz-alunite zones. Thallium is also anomalous at Summitville. Highest concentrations of Tl are found in argillic rock, whereas silicified zones are depleted in it. The anomalous Tl in distal zones is similar to observations in some porphyry Cu systems. Pronounced lateral zonation of Ag/Au ratios is present in the deposit. The Ag/Au ratios vary from about 2:1 near the center of the orebody to greater than 20:1 on the periphery.The Summitville deposit is located in the midlevel portion of a mineralized volcanic dome, with a porphyry system at depth, and a hot springs environment at the surface. Drill holes through the volcanic dome intersected a quartz monzonite porphyry approximately 600 m below the surface that is altered to sericite and pyrite similar to some porphyry deposits. Laterally extensive cristobalite and opal replacing quartz latite are found southwest of the deposit and represent a hot-spring environment. Bedded siliceous sinter, some of which contains plant debris, overlies the cristobalite and opal at some localities. These deposits may represent surface vents for the fluids responsible for acid sulfate alteration or mineralization of the volcanic dome.

Economic Geology↗
USGS2017

Emplacement of Holocene silicic lava flows and domes at Newberry, South Sister, and Medicine Lake volcanoes, California and Oregon

This field guide for the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly 2017 focuses on Holocene glassy silicic lava flows and domes on three volcanoes in the Cascade Range in Oregon and California: Newberry, South Sister, and Medicine Lake volcanoes. Although obsidian-rich lava flows have been of interest to geologists, archaeologists, pumice miners, and rock hounds for more than a century, many of their emplacement characteristics had not been scientifically observed until two very recent eruptions in Chile. Even with the new observations, several eruptive processes discussed in this field trip guide can only be inferred from their final products. This makes for lively debates at outcrops, just as there have been in the literature for the past 30 years. Of the three volcanoes discussed in this field guide, one (South Sister) lies along the main axis defined by major peaks of the Cascade Range, whereas the other two lie in extensional tectonic settings east of the axis. These two tectonic environments influence volcano morphology and the magmatic and volcanic processes that form silicic lava flows and domes. The geomorphic and textural features of glass-rich extrusions provide many clues about their emplacement and the magma bodies that fed them. The scope of this field guide does not include a full geologic history or comprehensive explanation of hazards associated with a particular volcano or volcanic field. The geochemistry, petrology, tectonics, and eruption history of Newberry, South Sister, and Medicine Lake volcanic centers have been extensively studied and are discussed on other field excursions. Instead, we seek to explore the structural, textural, and geochemical evolution of well-preserved individual lava flows—the goal is to understand the geologic processes, rather than the development, of a specific volcano.

California, Oregon↗
USGS2001

Natural-gas hydrates: Resource of the twenty-first century?

Although considerable uncertainty and disagreement prevail concerning the world's gas-hydrate resources, the estimated amount of gas in those gas-hydrate accumulations greatly exceeds the volume of known conventional gas reserves. However, the role that gas hydrates will play in contributing to the world's energy requirements will ultimately depend less on the volume of gas-hydrate resources than on the cost to extract them. Gas hydrates occur in sedimentary deposits under conditions of pressure and temperature present in permafrost regions and beneath the sea in outer continental margins. The combined information from arctic gas-hydrate studies shows that in permafrost regions, gas hydrates may exist at subsurface depths ranging from about 130 m to 2000 m. The presence of gas hydrates in offshore continental margins has been inferred mainly from anomalous seismic reflectors (known as bottom-simulating reflectors) that have been mapped at depths below the seafloor ranging from approximately 100 m to 1100 m. Current estimates of the amount of gas in the world's marine and permafrost gas-hydrate accumulations are in rough accord at about 20,000 trillion m3. Gas hydrate as an energy commodity is often grouped with other unconventional hydrocarbon resources. In most cases, the evolution of a nonproducible unconventional resource to a producible energy resource has relied on significant capital investment and technology development. To evaluate the energy-resource potential of gas hydrates will also require the support of sustained research and development programs. Despite the fact that relatively little is known about the ultimate resource potential of gas hydrates, it is certain that they are a vast storehouse of natural gas, and significant technical challenges will need to be met before this enormous resource can be considered an economically producible reserve.

AAPG Memoir↗
USGS1989

Terrain, vegetation, and landscape evolution of the R4D research site, Brooks Range Foothills, Alaska

Maps of the vegetation and terrain of a 22 km2 area centered on the Department of Energy (DOE) R4D (Response, Resistance, Resilience to and Recovery from Disturbance in Arctic Ecosystems) study site in the Southern Foothills Physiographic Province of Alaska were made using integrated geobotanical mapping procedures and a geographic-information system. Typical land forms and surface f orms include hillslope water tracks, Sagavanirktok-age till deposits, nonsorted stone stripes, and colluvial-basin deposits. Thirty-two plant communities are described; the dominant vegetation (51% of the mapped area) is moist tussock-sedge, dwarf-shrub tundra dominated by Eriophorum vaginatum or Carex bigelowii. Much of the spatial variation in the mapped geobotanical characters reflects different-aged glaciated surfaces. Shannon-Wienerin dices indicate that the more mature landscapes, represented by retransported hillslope deposits and basin colluvium, are less heterogeneous than newer landscapes such as surficial till deposits and floodplains. A typical toposequence on a mid-Pleistocene-age surface is discussed with respect to evolution of the landscape. Thick Sphagnum moss layers occur on lower hillslopes, and the patterns of moss-layer development, heat flux, active layer thickness, and ground-ice are seen as keys to developing thermokarst-susceptibility maps.

Alaska↗
USGS1997

Development of multiple unconformities during the Devonian-Carboniferous transition on parts of Laurussia

The Devonian-Carboniferous transition on Laurussia was a time of diverse geologic activity associated with the assembly of Pangea, including episodes of Late Devonian glacial-eustatic lowstand and active orogeny on four margins. Six widespread unconformities are present in the Devonian-Carboniferous (Mississippian) interval on southern parts of Laurussia. We suggest that attention to the timing and plan of the unconformities may provide ways of discerning tectonic and climatic controls on their respective origins. Indeed, unconformities generated by pure eustasy are ideally of interregional extent, whereas unconformities generated by tectonism reflect more local factors associated with the evolution of sedimentary basins. Each of the six unconformities analyzed provides evidence for concurrent eustasy and tectonism. Glaciation was apparently the dominant factor driving the development of unconformities during the latest Devonian. During the Early Carboniferous, however, the volume of glacial ice available to drive eustasy was limited and, at times, tectonism may have been the source of a subordinate eustatic signal. Development of unconformities in southern Laurussia appear to be local manifestations of tectonic and climatic processes associated with supercontinent assembly. Thus, the time may be at hand for construction of a new global stratigraphic paradigm that is based on the plate tectonic supercycle affecting continentality and climate.

Prace - Panstwowego Instytutu Geologicznego↗