Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Ecological Applications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

279 records · Page 14Linked to original sources
USGS2025

Earthquake magnitude and source parameter estimation with a distributed acoustic sensing dataset in the Gorda subduction zone

Distributed acoustic sensing (DAS) systems offer a cost‐effective way to create large‐scale strainmeter arrays for seismological applications using fiber‐optic cables. DAS‐based strain measurements are known to be influenced by various factors, bringing into question their general reliability for accurate earthquake characterization. A 15‐km‐long DAS deployment in northern California was operational within 3 days of the 2022 M w 6.4 Ferndale earthquake and ran continuously throughout the aftershock sequence. We utilize these aftershock data to validate DAS‐based strain measurements in two ways. We first test the accuracy of DAS‐based magnitude estimates from peak dynamic strains by comparing them with magnitude and attenuation scaling relations derived independently from traditional borehole strainmeter (BSM) data. We demonstrate that DAS‐based magnitudes are comparable to BSM‐based magnitudes when corrections for variations in site response along the fiber‐optic cable are properly made. Magnitude errors are spatially correlated, potentially because of factors such as finite‐fault effects (e.g., stress drop) or more complex, unmodeled path attenuation or because of wave propagation effects in heterogeneous media. We then apply more advanced source characterization methodology to the DAS data using a time‐domain empirical Green’s function (EGF) deconvolution approach to measure details of the moment rate history. The EGF approach using DAS data depends on careful treatment of distorting factors such as anthropogenic sources of noise and optical phase wrapping but successfully isolates source spectra for moderate‐magnitude earthquakes: source spectral ratios obtained from DAS data, broadband seismometer data, and BSM data in the same region show consistent results, revealing differences in directivity and spectral shape among earthquakes. Although further research is needed to refine source‐time‐function estimation techniques for DAS data, particularly for larger magnitude events, these case studies demonstrate the clear potential of DAS for earthquake source characterization.

California↗
USGS2024

Integration of rupture directivity models for the US National Seismic Hazard Model

Several rupture directivity models (DMs) have been developed in recent years to describe the near-source spatial variations in ground motion amplitudes related to propagation of rupture along the fault. We recently organized an effort towards incorporating these directivity effects into the USGS National Seismic Hazard Model (NSHM), by first evaluating the community's work and potential methods to implement directivity adjustments into probabilistic seismic hazard analysis (PSHA). Guided by this evaluation and comparison among the considered DMs, we selected an approach that can be readily implemented into the USGS hazard software, that provides an azimuthally varying adjustment to the median ground motion and its aleatory variability. This method allows assessment of the impact on hazard levels and provides a platform to test the DM amplification predictions using a generalized coordinate system, necessary for consistent calculation of source-to-site distance terms for complex ruptures. We give examples of the directivity-related impact on hazard, progressing from a simple, hypothetical rupture, to more complex fault systems, composed of multiple rupture segments and sources. The directivity adjustments were constrained to strike-slip faulting, where DMs have good agreement. We find that rupture directivity adjustments using a simple median and aleatory adjustment approach can impact hazard both from a site perspective and on a regional scale, increasing shaking off the end of the fault trace up to 30--40\% and potentially reducing it for sites along strike. Statewide hazard maps of California show that the change in shaking along major faults can be a factor to consider for assessing long-period (>ls) near-source effects within the USGS NSHM going forward, reaching up to 10--20\%. Finally, we suggest consideration of minimum parameter ranges and baseline requirements as future DMs are developed to minimize single approach adaptations, to enable more consistent application within both ground motion and hazard studies.

Earthquake Spectra↗
USGS2025

Aeromagnetic and magnetotelluric imaging of west-central Idaho and the Stibnite-Yellow Pine mining district: A regional to district perspective

Aeromagnetic and magnetotelluric (MT) data are used to better understand the geology and mineral resources near the Stibnite-Yellow Pine mining district in central Idaho. The reduced-to-pole (RTP) transformation of regional-scale aeromagnetic data shows that allochthonous island-arc rocks west of the Salmon River suture are significantly more magnetic than the Laurentian continental rocks east of the suture and that the granitoids of the Idaho batholith have moderate to low magnetization in both early, metaluminous, and late, peraluminous phases. Application of tilt derivative to aeromagnetic data highlights major crustal-scale structures. The 5-km upward continued magnetic data indicate island-arc rocks have deep magnetic sources. The 110-km-long MT profile images resistivity structure to depths around 30 km. At shallow depths, resistivity corresponds to mapped geologic units, with moderate resistivities underlying volcanic and roof-pendant metasedimentary rocks and moderate to high resistivities occurring beneath the Idaho batholith. Crustal-scale moderate resistivities beneath the suture image the results of tectonomagmatic processes that accompanied suturing and translating allochthonous terranes. Low resistivity values beneath and fringing the batholith are derived from metasedimentary rocks that may have served as a melt source and reductant during melt generation and provided metals during later ore formation. In the Stibnite-Yellow Pine mining district, a high-resolution aeromagnetic compilation is shown to correlate with mapped lithologies and mineral deposit-related structures. The RTP transform distinguishes magnetic and nonmagnetic granitoid phases of the Idaho batholith. The tilt derivative highlights metasedimentary rocks, some of which are favorable ore hosts. The Meadow Creek fault hosts the Stibnite and Hangar Flats deposits and is imaged as a magnetic low due to hydrothermal alteration. Reconstructions of magnetic anomaly offsets and orebodies indicate around 3 km of post-95 Ma dextral separation, with some or all of the offset inferred to postdate the main Au mineralization episode (61–66 Ma).

Idaho↗
USGS2026

Towards a refined definition of “tidal influence” for the coastal wetland sciences

The astronomical tide relates to lunar (and to a lesser extent solar) influences on rising and falling water bodies, and is a key control of many coastal processes. However, tides manifest along coastal margins in different ways to muddle application beyond Sir Isaac Newton’s first descriptions. Here, we argue that tide, or specifically “tidal,” has not been adequately defined for the coastal wetland sciences to facilitate contemporary interdisciplinary distinction for rapidly changing coastlines and future climate adaptation planning. We provide a brief history of the tidal concept, and we describe tides in a diversity of uncommonly recognized marginal coastal environments. Common astronomical tide manifestations are described through hydrographic examples, then expanded to include those tidal environments exposed additionally to fluvial, meteorological (wind), or groundwater influences. Our expanded definition of “tidal” is intended to be a forward-looking construct as environments will inevitably change with sea-level rise, water extraction, and anthropogenic flow alteration. Our definition of wetland tidal influence, which we broaden, includes those “wetlands affected by astronomic water level fluctuations within coastally restricted environments causing frequent or infrequent surface inundation or groundwater tidal variation that affects the biogeochemistry of the soil (e.g., ion exchange capacity, oxygen state, mineralization processes)”. Astronomic water level fluctuations are often amplified or dampened by non-astronomical events, such as wind. Expanding the definition of what is considered tidal by the scientific community is critical for improved understanding of coastal wetland function and the suite of ecosystem services they provide people and society, including climate mitigation opportunity, management, and adaptation.

Wetlands↗
USGS2026

The 2025 Puerto Rico and Virgin Islands U.S. National Seismic Hazard Model Update: Ground motion model selection and comparison

We evaluate, select, and describe the ground-motion models (GMMs) used in the 2025 update of the U.S. National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). We identify the most appropriate models that align with GMM selection criteria for use in the PRVI region to improve the accuracy of seismic hazard assessments. The update incorporates globally applicable GMMs suited for the active crustal and subduction earthquakes in the region. We include region-specific adjustments to these GMMs derived from local site response analyses derived from ground motion records. The unadjusted and regionally-corrected GMMs are combined to create a robust model for predicting median ground motion. The model integrates epistemic uncertainty through a median ground motion logic tree that accounts for variations in magnitude and distance. This study compares the GMMs selected for the 2025 PRVI NSHM, including both as-provided and regionally adjusted NGA-West2 and NGA-Subduction models, with those used in the 2003 PRVI NSHM. We evaluate how changes in model selection, weighting, aleatory variability, and epistemic uncertainty influence seismic hazard estimates. Trends with distance, magnitude, and spectral period are analyzed to evaluate how the scaling behavior of the newer GMMs differs from that of earlier models. Relative to the GMMs used in the 2003 NSHM for this region, the 2025 models generally predict lower ground motions. Comparisons with additional GMMs indicate that the adjustments applied for PRVI are consistent with regional-specific modifications developed elsewhere globally. The increase in aleatory variability and epistemic uncertainty in the 2025 update results in a notable increase in hazard levels from these wider uncertainty bounds. These changes can result in as much as a 10%–20% variation in probabilistic ground motion at the 2% in 50 years exceedance level for hazard maps computed across the region for representative site classes and periods.

Puerto Rico, Virgin Islands↗
USGS2023

Sediment thickness map of United States Atlantic and Gulf Coastal Plain Strata, and their influence on earthquake ground motions

With the recent successful accounting of basin depth ground-motion adjustments in seismic hazard analyses for select areas of the western United States, we move toward implementing similar adjustments in the Atlantic and Gulf Coastal Plains by constructing a sediment thickness model and evaluating multiple relevant site amplification models for central and eastern United States seismic hazard analyses. We digitize and combine existing sediment thickness data sets into a composite surface that delineates the base of Cretaceous sediments under the Atlantic Coastal Plain and the base of Mesozoic sediments under the Gulf Coastal Plain. Amplification models dependent on sediment thickness, site natural period, and source-to-site path length are compared with data sets of observed ground motions to evaluate the ability of the new models to improve ground motion estimates. We find that the amplification models can account for observed trends in sediment-thickness and period-dependent residuals, but some tuning is required. For example, the model of Chapman and Guo requires a reference V S 30 , the time-averaged shear-wave velocity within 30 m of the Earth’s surface, for non-Coastal Plain sites, which we estimate to be between about 1 and 2 km/s. Along with our sediment thickness model, we estimate a velocity profile for application to the Harmon et al. site-natural-period-based model in order to best match the Chapman and Guo period dependence for a broad range of sediment thicknesses. The Next Generation of Attenuation models for the eastern United States Gulf Coast path-based adjustment models can also account for seismic attenuation in the Coastal Plain sediments and reduce the standard deviation of total residuals. If enacted in the U.S. Geological Survey National Seismic Hazard Model, these amplification models will reduce predicted short-period (<1 s) and increase predicted long-period (>1 s) ground motions in the Coastal Plains appreciably.

Earthquake Spectra↗
USGS2026

Site-specific amplifications in Northwestern Turkiye: A generic approach

In this study, we derive generic site amplification functions applicable to Northwestern Türkiye and follow guidance on site classifications established by the United States National Earthquake Hazards Reduction Program (NEHRP). We employ the one-dimensional (1-D) equivalent linear ground response analysis method and focus on recordings from a select suite of free-field strong motion (SM) stations. These particular SM stations are associated with a comprehensive geotechnical site conditions dataset comprising 76 shear-wave velocity profiles. Despite their varying resolutions and depths, this diversity allows for a more representative analysis across different site conditions, enhancing the robustness of our findings. For analyses, we utilize a robust set of global ground motion records, selected from both within and outside of Türkiye, to serve as strong and weak input bedrock motions. Site amplification is determined by propagating these bedrock records through 76 site-specific Afet ve Acil Durum Yönetimi Başkanlığı (AFAD) station profiles and calculating the spectral acceleration ratio between the ground surface and the input motion. Our analyses reveal substantial disparities between the amplification functions derived from 1-D site response analyses using strong and weak input motions. These disparities are central to our analysis and inform the subsequent comparison with site amplification functions reported in the literature. We compare the generic site amplification functions derived in this study with those reported in the literature for regions with similar geological and seismic conditions to Northwestern Türkiye. For example, site amplification functions for NEHRP Site Classes C and D have been documented for Greece and the United States utilizing frequency-dependent methods such as the quarter-wavelength approximation. Our findings reveal that the generic site amplification functions derived in this study exhibit differences in peak amplitudes and predominant frequencies compared to those in the literature, reflecting regional variations in geotechnical and seismic properties. This study represents an initial effort to formulate generic site amplification functions for Türkiye, with a particular emphasis on the Northwestern region. A thorough literature review indicated no prior studies have proposed such functions specifically for this area.

Northwestern Turkiye↗
USGS2026

A novel drive-point multilevel system to investigate PFAS and other contaminants of global concern in the hyporheic zone of a wastewater effluent dominated stream

Contaminants found in treated wastewater discharged to streams, including pharmaceuticals and per- and polyfluoroalkyl substances (PFAS), are of global concern due to their deleterious effects on aquatic ecosystems and potential impacts to human health. Hyporheic zones have strong potential for contaminant attenuation. Assessing this potential requires collection of physical and biogeochemical data within the hyporheic zone. This study tested the applicability of a novel drive-point multilevel system (DP-MLS) for quantifying head profiles and characterizing contaminant concentrations in the hyporheic zone of a temperate region effluent dominated stream (EDS). DP-MLS, each with 4 ports, were installed in the stream bed at two sites, DS-1 and DS-2, 0.2 and 4.7 km downstream of the effluent outfall, respectively. Head profiles were measured and groundwater collected for analysis of pharmaceuticals and PFAS temporally over two years. The DP-MLS withstood rapid changes in stage, ice formation, and floating debris. Vertical hydraulic gradients (VHG) were generally upward but varied in magnitude indicating heterogeneity in hydraulic conductivity and variability in flow conditions. Upward VHG were also about 2X larger at DS-1 than at DS-2. Contaminant concentration profiles consistently showed penetration of pharmaceuticals and PFAS to 1 m below the bed at DS-2 while there was less penetration, lower groundwater concentrations, and more temporal variability in concentrations at DS-1. Integration of the physical and chemical data suggests weaker upwelling conditions at DS-2 are more easily reversed during periods of high stream stage, which could facilitate migration of wastewater contaminants into the bed. However, further studies incorporating other transport processes and reach scale dynamics are required to fully characterize these exchanges. Overall, this study demonstrates the efficacy of these novel DP-MLSs for characterization of the hyporheic zone and provides new insights into the occurrence, composition, and persistence of wastewater derived contaminants in the hyporheic zone of a well-studied EDS.

Iowa↗
USGS2025

Mapping potential sensitivity to hydrogeomorphic change in the UMRS riverscape

In 2020 the U.S. Geological Survey (USGS), as part of the Upper Mississippi River Restoration (UMRR) Program, began a new project to characterize potential hydrogeomorphic change associated with hydrogeomorphic units (HGUs) and their catenae (units linked by their association with sediment sources and flow origins). The goal of the project was to develop a geographic information system (GIS) database of HGUs for the Upper Mississippi River System (UMRS) available to both scientists and river managers working on UMRR studies and HREP planning and design studies. The characterization was based on a hydrogeomorphic change hierarchical classification developed previously for the UMRS. The products were generated with automated techniques in a GIS using systemic datasets. Landforms were mapped from the 2015 UMRS topobathymetric dataset with geomorphon (shape-based) tools tailored for the large riverscape, valley bottom environments in the UMRS. A clustering analysis was applied to the resulting landforms to identify HGUs associated with zones of perennial low flows, bankfull flows, and overbank floodplains. Catenae were assembled based on the proximity of the units to the main channel, tributary mouths, and side channels from previously published aquatic areas (USACE, 2018) coupled with least-cost flowpath linkages between potential sediment origins and planform change units developed by Rogala, Fitzpatrick, and Henderson (2020). These GIS-based analyses were successful at identifying a range of HGUs using an automated technique with available data across the entire riverscape, with emphasis on those that have the potential for hydrogeomorphic change. Most of the resulting features are depositional, as expected in a large river system. However, this is the first attempt of linking tributary inputs, side channel erosion and levee breaches with their depositional counterparts. The approach was successfully piloted in Pools 8 and 10 in the Upper Impounded Reach and Pool 14 in the Lower Impounded Reach, with next steps for application in reaches of the unimpounded section and Illinois River. This report emphasizes results from Pool 10, which was the focus of most of our attention during the pilot phase.

Illinois, Indiana, Iowa, Minnesota, Missouri, Sout↗
USGS2024

A comparative analysis of OpenET for evaluating evapotranspiration in California almond orchards

The almond industry in California faces water management challenges that are being exacerbated by droughts, climate change, and groundwater sustainability legislation. The Tree-crop Remote sensing of Evapotranspiration eXperiment (T-REX) aims to explore opportunities to improve precision irrigation management for woody perennial cropping systems. Almond orchards in the California Central Valley were equipped with eddy covariance flux measurements to evaluate satellite remote sensing-based evapotranspiration (RSET) models. OpenET provides high-resolution (30-m spatial and daily temporal) RSET data, synthesizing decades of research for practical water management. This study provides an evaluation of OpenET performance at six almond sites covering a large range in soils, age, and variety. It also compares OpenET ensemble evapotranspiration (ET) data with applied irrigation and precipitation records over an additional 148 almond orchards located in the Central Valley of California. Results show OpenET models, including the ensemble ET value, produced reasonable and actionable ET values, with overall coefficient of determination (R 2 ) and mean absolute error values of 0.73- and 0.95-mm d −1 at the daily time step, respectively. However, given the temporal sampling of Landsat (8-day revisit) and the interpolation methods used, the assessed ET models had difficulty in capturing short-term variability in almond ET; for example, the rapid decline in measured ET observed as a response to lack of irrigation preceding and during almond harvest. The study also drew attention to the spatial complexity in scenarios where irrigated orchards are surrounded by hot/dry areas, causing discrepancies between measured and modeled ET values. In comparison with irrigation records, OpenET ensemble ET was capable of quantifying water input (applied irrigation + precipitation) in almond orchards to within 13 % when evaluating monthly data. Initial results presented here reinforce the idea that RSET models, such as in OpenET, are powerful tools, yet their application requires nuanced understanding and careful consideration of local conditions.

California↗
USGS2024

Peak streamflow trends and their relation to changes in climate in Illinois, Iowa, Michigan, Minnesota, Missouri, Montana, North Dakota, South Dakota, and Wisconsin

Flood-frequency analysis, also called peak-flow frequency or flood-flow frequency analysis, is essential to water resources management applications including critical structure design and floodplain mapping. Federal guidelines for doing flood-frequency analyses are presented in a U.S. Geological Survey Techniques and Methods report known as Bulletin 17C. A basic assumption within Bulletin 17C is that for drainage basins without major hydrologic alterations, statistical properties of the distribution of annual peak streamflows (peak flows) are stationary; that is, the mean, variance, and skew are constant. The stationarity assumption has been widely accepted within the flood-frequency community; however, a better understanding of long-term climatic persistence and concerns about potential climate change and land-use change has caused a reexamination of the stationarity assumption. This work is part of that reexamination. The stationarity assumption is a concern because flood-frequency analyses that do not incorporate observed trends and abrupt changes may result in a poor representation of the true flood risk. Bulletin 17C does not offer guidance for incorporating nonstationarities when estimating floods, and it describes a need for studies that incorporate changing climate or basin characteristics. In response to this need and a history of concern regarding nonstationarity peak flows in the region, this study was done to assess potential nonstationarity in peak flows in the north-central United States. This report summarizes the methods used to detect hydroclimatic changes in peak-flow data in the study region. Four periods were selected for analysis of peak flow, daily streamflow, and climate data. The periods are (1) a 100-year period, 1921–2020; (2) a 75-year period, 1946–2020; (3) a 50-year period, 1971–2020; and (4) a 30-year period, 1991–2020. The starting point for these analyses was the initial data analysis of peak flow described in Bulletin 17C, which includes plotting the peak flow and checking for autocorrelation, monotonic trends, and changes points. Analyses were added to examine additional features in the data. Results are provided in a U.S. Geological Survey data release. The study limitations are documented for users of the results.

Scientific Investigations Report↗
USGS2025

Grammar to graph—An approach for semantic transformation of annotations to triples

Data annotation is the process of labeling data to show the outcome that a related data model should predict. In this study, annotation data were transformed into semantic graph triples, mainly for use with the Resource Description Framework (RDF), a type of entity-relationship-attribute data model for graph databases. The transformation of annotation data to semantic graph triples provides complex linguistic meaning with data handling advantages such as reduced data storage needs, improved logical specification of relations between objects, and reusable classes and properties that support logic and inference. A grammar-based framework in graph form supports user questions and queries. The words defining approximately 334 topographic feature types compiled by the U.S. Geological Survey were tokenized as units of analysis and grouped by part of speech. Their dependency relations were identified for this study using natural language processing libraries. Dependency concepts are used as structured semantic relations among part-of-speech classes. Tokens, units equivalent to words, form instances of classes and were quantified within a tabular output format using PostgreSQL data storage software. Table data were logically aligned as triples following a mapping file and stored with an ontology file using Ontop virtual triplestore software. A grammar ontology schema for the data was synchronized to match queries whose results validated the graph’s structure. The text analysis produced 8 part-of-speech classes of content words for object representations and 4 classes of function words for operational applications. Dependency relations formed 27 ontology properties for topographic subgraph structures. Token occurrences shaped overall ontology salience and formed a lexicon of syntactic terms for subgraph objects and properties. The schema ontology of class and property population shapes formed the lexicon of English terms. SPARQL Protocol and RDF Query Language (SPARQL) was used with the lexicon to conform data to RDF guidelines. This study confirms the hypothesis that although linguistic logic varies from description logic, its approximation applies to ontology design. Property and query use case patterns extracted from the analysis support queries concerning complex topographic relations and patterns normally embedded within text definitions. The method used in this study could be applied to text forms in other domains, such as survey notes.

Scientific Investigations Report↗
USGS2025

Properties of solid bitumen formed during hydrous, anhydrous, and brine pyrolysis of oil shale: Implications for solid bitumen reflectance in source-rock reservoirs

Solid bitumen reflectance (BR o in %) is widely used as a thermal maturity proxy in source-rock reservoirs, yet solid bitumen texture and physical attributes may be affected by varying environmental constraints during its formation, e.g., water saturation, mineral catalysis, or salinity. Herein we investigated the development of solid bitumen properties during artificial maturation using three diverse (lacustrine to marine) oil shale samples containing abundant amorphous H-rich sedimentary organic matter (bituminite). The oil shales were treated via pyrolysis (320 °C, 72 h) using hydrous, anhydrous, and brine conditions, causing the development of a newly formed solid bitumen in the experiment residues from the thermal conversion of bituminite. The properties of the newly formed solid bitumen then were evaluated via geochemical screening tests, optical and electron microscopy, and infrared spectroscopy. Experimental residues also were treated via solvent extraction, allowing characterization of the effects of extraction on solid bitumen. Results showed that bituminite with higher resin and asphaltene components evolved to a solid bitumen with higher reflectance (as a percentage of the original value) when exposed to the same heat treatment, relative to bituminite with higher saturate and aromatic components. Aromatization of solid bitumen also was generally more pronounced in the presence of deionized water relative to anhydrous conditions, supporting prior observations. These results suggest the compositions of primary sedimentary organic matter, and the local concentration of water, affect the development of solid bitumen during thermal advance, potentially explaining the origin of multiple solid bitumen populations with varying reflectance in source-rock reservoir samples or in a single microscope field. Experiments using brine were inconclusive regarding enhanced/decreased aromatization, which could be attributed to the salinities of the brines used in the tests. Extraction of residues caused a consistent increase in BR o values, suggesting that migrating or expelled oils could cause an increase in BR o via natural solvation and absent an increase in temperature. This work provides insights into the development and evolution of BR o in source-rock reservoirs as a function of the composition of the original bituminite and changing environmental conditions, with potentially broad application for petroleum prospecting and resource estimation.

Colorado↗
USGS2026

Inference of pattern-based geological CO2 sequestration and oil recovery potential in a commingled main pay and residual oil zone CO2-EOR flood

Several detailed studies have shown that residual oil zones (ROZs) can present significant resources for additional hydrocarbon recovery as well as subsurface carbon dioxide (CO 2 ) sequestration via enhanced oil recovery by injecting CO 2 (CO 2 -EOR). Field development strategies included new wells drilled dedicated to main pay zones (MPZ) and ROZs, or existing wells in MPZs deepened to ROZs for commingled injection-production using different well patterns. The latter presented a challenge when discerning the injection and production from each of the zones, and for subsequent quantification of CO 2 sequestration and EOR potential from different patterns and from the field. In this paper, an innovative method for analyzing commingled injections and productions from MPZs and ROZs, with application to pattern-based data from four staggered line drive patterns in Wasson Field's Denver Unit, Texas, USA, was developed. Decline curve and ratio-trend methods were used as means of history-matching and forecasting. Cumulative production-time and cumulative production-rate data for oil, gas, and water, as well as water-oil ratio (WOR) and gas-oil ratio (GOR), were analyzed along with injection data for time intervals covering major injection events in MPZ, or MPZ and ROZ combined. A combined analysis enabled inference of allocation of fluids into different zones during WAG (water alternating gas) injection and thereby estimation of CO 2 storage, utilization, and retention in different zones as a function of total injection. Results show that ROZs generally present higher CO 2 sequestration potential compared to MPZs, and a comparable incremental oil recovery factor of ∼20%, on average. Results based on ratio analysis further show that while the WOR trend of the pattern production is mostly dominated and controlled by ROZ, GOR is controlled by both intervals. Although the method relying on decline curves and the approach used in zonal fluid allocations are subject to their limitations, this study presents a practical and innovative well-pattern-based method to infer and forecast CO 2 sequestration and oil recovery quantities and fluid ratios from MPZs and ROZs in commingled operations and highlight the added potential offered by ROZs.

Texas↗
USGS2025

James Buttle review: The characteristics of baseflow resilience across diverse ecohydrological terrains

The dynamic storage of aquifers is the portion of groundwater that can potentially drain to any given point along a stream to create baseflow. Baseflow typically occurs year-round in perennial streams, though the characteristics and stability of dynamic storage are often most important to instream processes during extended dry periods (without precipitation and snowmelt) when runoff and quickflows are minimised. The term ‘baseflow resilience’ is defined for this review as the tendency of baseflow in streams to maintain a consistent volume and water quality year to year while under stress from climate variability and extremes, along with anthropogenic stressors such as water withdrawals, land use change, and water quality degradation. ‘Baseflow resilience’ has, in part, a user-defined meaning spanning water supply and water quality variables of primary interest. Watershed characteristics that directly impact resilience can often produce non-intuitive feedbacks that enhance some attributes of baseflow while simultaneously impairing others. For example, permeable stream corridor geology creates strong stream-groundwater hydrologic connectivity, yet fast groundwater drainage via preferential high-permeability flowpaths can lead to streamflow not being sustained during extended dry periods. Also, shallow groundwater sources are generally more immediately vulnerable to extreme events, warming, salinization, transpiration, and precipitation drought, compared to deeper groundwater. Yet baseflow drought in streams influenced by deeper groundwater can lag precipitation drought by years, and contaminant legacies may propagate through deep groundwater flowpaths to receiving waters for decades to centuries. Finally, irrigation withdrawals can intercept groundwater that would have drained to streams, and the application of irrigation may leach contaminants from the soil zone by unnaturally raising water tables, yet irrigation return flows can sustain baseflow and groundwater-dependent habitats in semiarid areas. This review covers the concept of hydrologic resilience in the context of stream baseflow processes and summarises the common hydrogeological controls on, and multiscale stressors of, dynamic groundwater storage. Further, we present several quantitative metrics to assess a range of water supply to water quality baseflow characteristics using both broadly available and boutique data types, a subset of which are demonstrated using data from the Delaware River Basin, USA.

Delaware River Basin↗
USGS2024

Framework for implementing damping scaling factors in U.S. Geological Survey National Seismic Hazard Models

Traditionally, probabilistic seismic hazard analysis (PSHA) has focused on calculating ground motion hazard curves for elastic, 5%-damped pseudo spectral accelerations, Sa(T,5%), which are used as the basis for engineering design parameters and targets for ground motion selection and modification. However, structures and geotechnical systems can exhibit a wide range of damping ratios both above and below the 5% level, depending on the construction material, structural system, nonstructural elements, or subsurface soil properties. When spectral parameters at such damping levels are required for certain applications, 5%-damped accelerations have traditionally been extracted from PSHA-based hazard curves and adjusted outside of the hazard integral using damping scaling factors (DSF) such as those from Newmark & Hall (1982). Recent advances in the development of more rigorous and comprehensive damping scaling models (e.g., Rezaeian et al., 2014; Rezaeian et al., 2021) have allowed for the modeling of means and standard deviations of DSFs as functions of earthquake source and path properties for crustal, intraslab, and subduction interface tectonic environments. These DSF models can be applied to ground motion model (GMM) estimates of Sa(T,5%) for a given earthquake rupture scenario to produce a corresponding mean and standard deviation Sa at a specified damping ratio β, Sa(T,β). In this study, the DSF models of Rezaeian et al. (2014) and Rezaeian et al. (2021) are implemented within the U.S. Geological Survey National Seismic Hazard Model (NSHM) PSHA framework to calculate probabilistic hazard curves for spectral accelerations at damping ratios from 0.5% to 30%. The DSF models are applied directly to the mean and standard deviation of Sa(T,5%) predictions from each GMM in the NSHM logic tree. Resulting hazard curves and uniform hazard and risk spectra for Sa(T,β) are presented for several geographic locations and compared with corresponding spectra estimated using current design practices by applying the same DSFs outside of the PSHA calculation. Key differences between the two methods for estimating Sa(T,β) are discussed, and potential strategies are presented for the implementation and usage of the hazard-consistent Sa(T,β) in building codes. Comparing the results to those from DSFs used in current design practices that are mainly based on Newmark & Hall (1982) is not explored in this study.

Conference Paper↗
USGS2025

Water supply in the conterminous United States, Alaska, Hawaii, and Puerto Rico, water years 2010–20

We present an assessment of water supply across the conterminous United States (CONUS), Alaska, Hawaii, and Puerto Rico covering water years 2010–20. Our analysis drew on two national hydrologic models, the National Hydrologic Model Precipitation-Runoff Modeling System and the Weather Research and Forecasting model hydrologic modeling system. Both models produced estimates of streamflow, evapotranspiration, soil moisture, snow water equivalent, and other hydrologic states and fluxes. The models were driven by the bias-adjusted 4-kilometer-resolution, long-term regional hydroclimate simulation over the conterminous United States dataset (CONUS404). We assessed spatial and temporal error distributions by comparing monthly simulations at the 12-digit hydrologic unit code and regional scale from both models against external benchmarking datasets. Results showed that average annual rainfall across the CONUS was 857 millimeters per year for the period of analysis, with water year 2012 the driest year (729 millimeters) and water year 2019 the wettest year (995 millimeters). Key interannual variability results included the following: (1) the California–Nevada hydrologic region had the highest variability in precipitation and snow accumulation, and (2) the Texas hydrologic region was among hydrologic regions with the highest variability in precipitation. We related interannual variability in precipitation to storage volumes in soil moisture, snow water equivalent, and lakes and reservoirs to highlight areas with little storage and large year-to-year variability in precipitation. These areas included the Southern High Plains, Central High Plains, Texas, Souris–Red–Rainy, Mississippi Embayment, and Midwest regions. Our analysis of groundwater-level data showed that several of these areas overlap aquifers where groundwater levels were considerably lower than historical averages, including the Colorado Plateaus aquifers, the Rio Grande aquifer system, and the Central and Southern regions of the High Plains aquifer. Many of these lowered groundwater levels are continuations of decades-long declines from overpumping that started well before the assessment period. The resulting water budgets and their analyses provide a high-resolution foundational assessment of the mean state and variability of the terrestrial hydrologic cycle across the CONUS and Alaska, Hawaii, and Puerto Rico to support a wide range of water resource management applications.

Professional Paper↗
USGS2026

Comparative assessment of STIC sensors, streamflow and rain gauges for quantifying river connectivity in intermittent systems

In intermittent stream systems, including those occurring in Texas, USA, the severity of low-flow conditions, duration of seasonal disconnection, and frequency of no-flow events have been amplified by drought. Documentation of these no-flow events is necessary to evaluate ecosystem health. However, many intermittent reaches remain un-gauged given that perennial river sec-tions are often prioritized for gauge placement. Our objectives were to 1) document stream flow using Stream Temperature, Intermittency, and Conductivity (STIC) loggers to determine the frequency and duration of no-flow events in intermittent tributaries of the Colorado River, Texas and 2) compare logger data to publicly available data from streamflow discharge and precipitation gauge networks to understand differences among these data types for drying event characterization. We use these comparisons to summarize benefits and limitations of the application of in-stream data loggers. STIC loggers were deployed at 19 sites, one in each pool and riffle habitat of a stream reach. STIC loggers recorded a measurement of relative conductance every six hours from June 2022 to March 2024, which was used to determine the presence or absence of flow connectivity in a reach. No-flow duration among intermittent reaches varied between 37 and 270 days across tributaries during an ongoing drought in the study area. Overall, logger data was more precise than discharge data for characterizing no-flow events or precipitation data when documenting presence of water in the stream channel due to runoff. Lack of discharge gauges in intermittent tributaries left large sections of stream reaches undocumented and resulted in mischaracterization of flow patterns. Drought severity across the tributaries did not follow longitudinal patterns that would be expected by the climatic precipitation gradient of the study area. More research is needed to determine if factors such as population size affect severity. Likewise, precipitation data did not correlate well with logger water presence data, lacking consideration for groundwater recharge, soil hydrophobicity, and surface compaction. This study shows that to monitor no-flow events, detailed spatial datasets are necessary and that STIC loggers are useful tools that provide data to fill spatial information gaps and facilitate more accurate flow characterization and water presence data in intermittent systems.

Texas↗