Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Earth and Space Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
USGS2009

Pingos on Earth and Mars

Pingos are massive ice-cored mounds that develop through pressurized groundwater flow mechanisms. Pingos and their collapsed forms are found in periglacial and paleoperiglacial terrains on Earth, and have been hypothesized for a wide variety of locations on Mars. This literature review of pingos on Earth and Mars first summarizes the morphology of terrestrial pingos and their geologic contexts. That information is then used to asses hypothesized pingos on Mars. Pingo-like forms (PLFs) in Utopia Planitia are the most viable candidates for pingos or collapsed pingos. Other PLFs hypothesized in the literature to be pingos may be better explained with other mechanisms than those associated with terrestrial-style pingos. ?? 2008 Elsevier Ltd.

Planetary and Space Science↗
USGS1974

Seismic hazards and land-use planning

Basic earth-science data are necessary for a realistic assessment of seismic hazards and as a basis for limiting corrective land-use controls only to those areas of greatest hazard. For example, the location, character, and amount of likely displacement and activity of surface faulting can be predicted if detailed geologic maps and seismic data are available and are augmented by field studies at critical localities. Because few structures can withstand displacement of their foundations, they should be located off active fault traces, the distance varying with the character of faulting, the certainty with which fault traces are known, and the importance of the structure. Recreational activities and other nonoccupancy land uses should be considered for fault zone areas where land is under pressure for development; elsewhere, such areas should remain as open space. Two methods of predicting ground shaking effects have applications to land-use decisions: (1) Relative earthquake effects can be related to firmness of the ground and can be used in a gross way to allocate population density in the absence of more sophisticated analyses; and (2) intensity maps, based on, (a) damage from former earthquakes, or (b) a qualitative analyses of geologic units added to a design earthquake, can be helpful both for general and specific plans. Theoretical models are used with caution to predict ground motion for critical structures to be located at specific sites with unique foundation conditions. Fully adequate methods of assessing possible shaking remain to be developed. Where land-use decisions do not reflect likely ground shaking effects, stringent building codes are needed, particularly for important structures. Ground failure (landsliding, ground cracking and lurching, differential settlement, sand boils, and subsidence) commonly results from liquefaction, loss of soil strength, or compaction. Areas suspected of being most likely to fail should not be developed unless detailed site studies can demonstrate the hazard does not exist or can be overcome. Various methods can be used to reduce the high, long-term public costs that follow development of unstable ground. However, areas subject to tectonic deformation generally cannot be predicted nor can effects of such deformation be minimized. Large water waves, such as produced by tsunamis, seiches, and dam failure or overtopping, can be anticipated in many places. Their effects can be lessened by land-use regulations similar to flood-plain zoning, restrictions on location of critical structures, and appropriate warning systems. Many local, state, and federal government agencies, universities, and private consultants may be able to assist planners by advising them of pertinent data and where those data can be obtained. Interpretation of the data for an evaluation of seismic risk commonly requires a team of planners, geologists, and soil and structural engineers.

Circular↗
USGS2023

Viewing river corridors through the lens of critical zone science

River corridors integrate the active channels, geomorphic floodplain and riparian areas, and hyporheic zone while receiving inputs from the uplands and groundwater and exchanging mass and energy with the atmosphere. Here, we trace the development of the contemporary understanding of river corridors from the perspectives of geomorphology, hydrology, ecology, and biogeochemistry. We then summarize contemporary models of the river corridor along multiple axes including dimensions of space and time, disturbance regimes, connectivity, hydrochemical exchange flows, and legacy effects of humans. We explore how river corridor science can be advanced with a critical zone framework by moving beyond a primary focus on discharge-based controls toward multi-factor models that identify dominant processes and thresholds that make predictions that serve society. We then identify opportunities to investigate relationships between large-scale spatial gradients and local-scale processes, embrace that riverine processes are temporally variable and interacting, acknowledge that river corridor processes and services do not respect disciplinary boundaries and increasingly need integrated multidisciplinary investigations, and explicitly integrate humans and their management actions as part of the river corridor. We intend our review to stimulate cross-disciplinary research while recognizing that river corridors occupy a unique position on the Earth's surface.

Frontiers in Water↗
USGS1981

Objectives, accomplishments, and future plans of IGCP project 143, remote sensing and mineral exploration

The International Geological Correlation Programme (IGCP) is a worldwide cooperative research programme that began in 1974 under the auspices of the International Union of Geological Sciences. Because of the global availability of Earth resources data collected by satellites and the great interest among geologists in taking advantage of these new sources of information, a project was begun in 1976 to improve the rate of technology transfer in the field of remote-sensing exploration for energy and mineral resources. Conducting joint workshops in cooperation with COSPAR has been an important part of this project. It is to be hoped the project will improve our capability to explore, identify, and develop new resources to meet the burgeoning demands of society. ?? 1981.

Advances in Space Research↗
USGS1996

Distinguishing shocked from tectonically deformed quartz by the use of the SEM and chemical etching

Multiple sets of crystallographically-oriented planar deformation features (PDFs) are generated by high-strain-rate shock waves at pressures of > 12 GPa in naturally shocked quartz samples. On surfaces, PDFs appear as narrow (50-500 nm) lamellae filled with amorphosed quartz (diaplectic glass) which can be etched with hydrofluoric acid or with hydrothermal alkaline solutions. In contrast, slow-strain-rate tectonic deformation pressure produces wider, semi-linear and widely spaced arrays of dislocation loops that are not glass filled. Etching samples with HF before examination in a scanning electron microscope (SEM) allows for unambiguous visual distinction between glass-filled PDFs and glass-free tectonic deformation arrays in quartz. This etching also reveals the internal 'pillaring' often characteristic of shock-induced PDFs. This technique is useful for easily distinguishing between shock and tectonic deformation in quartz, but does not replace optical techniques for characterizing the shock features.

Earth and Planetary Science Letters↗
USGS2002

Cassini/VIMS observations of the moon

In this paper, we present preliminary scientific results obtained from the analysis of VIMS (Visible and Infrared Mapping Spectrometer) lunar images and spectra. These data were obtained during the Cassini Earth flyby in August 1999. Spectral ratios have been produced in order to derive lunar mineralogical maps. Some spectra observed at the north-east lunar limb, show few unusual absorption features located at 0.357, 0.430 and 0.452 ??m, the origin of which is presently unknown. ?? 2002 COSPAR. Published by Elsevier Science Ltd. All rights reserved.

Advances in Space Research↗
USGS2015

The effect of pressurized magma chamber growth on melt migration and pre-caldera vent locations through time at Mount Mazama, Crater Lake, Oregon

The pattern of eruptions at long-lived volcanic centers provides a window into the co-evolution of crustal magma transport, tectonic stresses, and unsteady magma generation at depth. Mount Mazama in the Oregon Cascades has seen variable activity over the last 400 ky, including the 50 km 3 climactic eruption at ca. 7.7 ka that produced Crater Lake caldera. The physical mechanisms responsible for the assembly of silicic magma reservoirs that are the precursors to caldera-forming eruptions are poorly understood. Here we argue that the spatial and temporal distribution of geographically clustered volcanic vents near Mazama reflects the development of a centralized magma chamber that fed the climactic eruption. Time-averaged eruption rates at Mount Mazama imply an order of magnitude increase in deep magma influx prior to the caldera-forming event, suggesting that unsteady mantle melting triggered a chamber growth episode that culminated in caldera formation. We model magma chamber–dike interactions over ∼50 ky preceding the climactic eruption to fit the observed distribution of surface eruptive vents in space and time, as well as petrologically estimated deep influx rates. Best fitting models predict an expanding zone of dike capture caused by a growing, oblate spheroidal magma chamber with 10–30 MPa of overpressure. This growing zone of chamber influence causes closest approaching regional mafic vent locations as well as more compositionally evolved Mazama eruptions to migrate away from the climactic eruptive center, returning as observed to the center after the chamber drains during the caldera-forming eruption.

Oregon↗
USGS2008

Evaluation of candidate Landsat Data Gap Sensors

The capabilities of the currently operational Landsat satellites may be lost before the launch of the follow-on Landsat Data Continuity Mission (LDCM), thus producing a gap in the Landsat data record and the National Satellite Land Remote Sensing Data Archive (NSLRSDA). In anticipation of a gap, the Federal agencies responsible for Landsat program management, the National Aeronautics and Space Administration (NASA) and the Department of Interior (DOI) U. S. Geological Survey (USGS), convened a Landsat Data Gap Study Team (LDGST). The study team assessed the basic characteristics of multiple systems and identified sensors aboard the China-Brazil Earth Resources Satellite (CBERS-2) and the Indian Remote Sensing (IRS-P6) ResourceSat-1 satellite as the most promising sources of Landsat-like data. The sensors include the combination of CBERS-2 Infrared Multi-spectral Scanner (IRMSS) and High Resolution Charged Coupled Device (CCD), as well as the IRS-P6 Advanced Wide Field Sensor (AWiFS) and the IRS-P6 Linear Imaging Self Scanning Sensor (LISS-III). The study team concluded that more robust technical evaluations of data and sensor performance are required before gap mitigation strategies can be fully formulated. A technical report is made available that summarizes the results from those evaluations, including the initial data characterization and science utility evaluation. The report can be accessed at http://calval.cr.usgs.gov/LDGST.php.

Conference Paper↗
USGS2020

Felsic melt and gas mobilisation during magma solidification: An experimental study at 1.1 kbar

Melt and gas transfer processes are essential to the formation and growth of the Earth’s crust and for sustaining volcanic activity. These processes also play a major role in magma fractionation at shallow depths (<10 km) where magmas stall rheologically and solidify. In this scenario, the conditions of melt and gas mobilization during progressive cooling of crystal mushes down to their solidus remain poorly understood. We present experimental data (at 1.1 kbar) showing how a combination of temperature and crystal content control the ability of melt and gas to escape from cooling and solidifying hydrous silicic magmas with initial crystal volume fractions (Φ) of 0.6, 0.7, and 0.8, and for temperature snapshots of 850, 800, and 750°. Microstructural observations and chemical data show that the amount of extracted melt increases by 70% from 850 to 750° and by 40% from Φ = 0.6 to 0.8 at 750°, due to the formation of interconnected crystal frameworks, gas expansion in constricted pore space, and filter pressing during cooling. As a result, our experiments suggest that melt and gas extraction from cooling mushes increases in proximity to their solidus and can operate efficiently at 0.6 < Φ <0.93. These observations shed light on maximum estimates of the segregation of gas-rich, crystal-poor magmas (0.02 m/year at 850° to 9 m/year at 750°) to form felsic dykes or eruptible systems feeding volcanoes.

Frontiers in Earth Science↗
USGS2025

Toward a near-lossless image compression strategy for the NASA/USGS Landsat Next mission

As orbiting Earth imaging platforms carry more complex and capable instruments, efficient methods are needed to reduce the time and cost associated with storing and downlinking greater volumes of image data. The upcoming NASA/USGS Landsat Next mission, with an increase in spatial and spectral resolution over previous Landsat missions, is no exception. Landsat Next will produce nearly six times the amount of image data per day over either of the current Landsat 8 or Landsat 9 observatories. Near-lossless compression, where the image after compression is not identical to the original image, allows for the efficient storage and transmission of all image data while meeting the mission’s global coverage, temporal revisit frequency, and science measurement and performance requirements. Although the Landsat user community is understandably cautious about lossy compression, it is possible to constrain the maximum loss, or error, introduced during compression, ensuring that any added error remains within the intrinsic noise level of the instrument. The Consultative Committee for Space Data Systems image compression standard, CCSDS 123.0-B-2, was chosen for the Landsat Next mission because it is an internationally supported standard suited for integration with space hardware, and it allows control over the magnitude and distribution of compression error. Using several proxy datasets as a surrogate for Landsat Next image data, an investigation was performed to determine a preliminary set of parameter values that would keep the added compression error within acceptable limits. The results of these studies demonstrate that near-lossless image compression can be utilized by the Landsat Next instruments to store and downlink all science data without compromising image quality or mission requirements.

Remote Sensing of Environment↗
USGS2010

The ASTER data system: An overview of the data products in Japan and in the United States

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data system is a cooperative system, which is operated jointly by Japan’s Ministry of Economy, Trade, and Industry (METI) through its Earth Remote Sensing Data Analysis Center (ERSDAC), and by the National Aeronautics and Space Administration (NASA) primarily through its Goddard Space Flight Center (GSFC) and Land Processes (LP) Distributed Active Archive Center (DAAC). ASTER is a moderate-resolution land remote sensing system onboard the Earth Observing System (EOS) Terra spacecraft. ASTER-acquired data are received at the White Sands, New Mexico, ground receiving station, and then transmitted via land network to the EOS Data and Operations System (EDOS) within the Goddard DAAC, located at the GSFC. EDOS pre-processes raw ASTER data to Level-0 (L0) data, and sends them via the high-speed Asia-Pacific Advanced Network (APAN) to the ASTER Ground Data System (GDS) in Japan. ASTER GDS processes the L0 data to level-1 (L1) datasets; they distribute these data to users, and also use them to generate higher-level products for their user community. ASTER GDS sends a copy of all L1A data they produce to NASA’s LP DAAC, located at the U.S. Geological Survey’s Center for Earth Resources Observation and Science (EROS) near Sioux Falls, South Dakota. All L1 data received from Japan are ingested, archived, and available for users at LP DAAC. The LP DAAC also generates and distributes higher-level products from L1 data based on requests from users. To meet time-critical needs related to sensor health and performance, natural disasters, national emergencies, and certain field campaigns, the ASTER Expedited Data System (EDS) was developed, and is operated jointly by U.S. and Japanese partners.

Book chapter↗
USGS2026

Sedimentological and geochemical characterization of lacustrine deposits of the Babouri-Figuil basin, northern Cameroon: Implications for source rocks distribution and petroleum exploration

The West and Central African Rift System (WCARS) refers to the series of Cretaceous rift basins where commercial hydrocarbon accumulations have been discovered. Some of the WCARS frontier basins are currently being investigated to increase our understanding of these basins in light of new commercial discoveries. The present study was performed in the Babouri-Figuil Basin (BFB), which is genetically related to the WCARS and constitutes an area of interest in terms of petroleum prospecting, where the distribution of petroleum source rocks and potential targets for petroleum exploration across the entire basin is poorly understood. For the current study, an integrated facies analysis along with organic and inorganic geochemical techniques were applied to the basin's Cretaceous deposits with the aim of reconstructing the paleodepositional environment, assessing factors that triggered the input of organic matter, and providing a spatial overview of the organic matter accumulation in the basin based on outcrop samples. An alluvial fan-lacustrine-braided river system is inferred from the facies analysis of the stratigraphic sequence consisting of conglomerate, sandstone, siltstone, limestone, marlstone, and claystone. Bulk analysis of organic matter reveals that black shale and massive claystone are the main prospective petroleum source rocks in the basin. Inorganic geochemical analyses reveal the influence of anoxic conditions, moderate to high primary productivity, and low terrigenous inputs in organic matter enrichment. The formations rich in organic matter are predominantly concentrated in the western and eastern parts of the basin which may represent areas with depressions, characterized by high accommodation space. In terms of the regional context of the WCARS rift basins, typical hydrocarbon exploration in the BFB may target basal-conglomerate, sandstone beds situated directly above or/and interbedded with the Lower Cretaceous source rocks, and the Upper Cretaceous sandstone beds. Basement rocks (granite, granodiorite, and gneisses) and oil shale deposits may represent potential unconventional hydrocarbon exploration. The current integrated study provides an insight that should guide future hydrocarbon exploration campaigns in the basin.

Babouri-Figuil basin↗
USGS2022

Landsat data ecosystem case study: Actor perceptions of the use and value of landsat

It is well-known that Earth observation (EO) data plays a critical role in scientific understanding about the global environment. There is also growing support for the use of EO data to provide context-specific insights, with significant implications for their use in decision support systems. Technological development over recent years, including cloud computing infrastructure, machine learning techniques, and rapid expansion of the velocity, volume, and variety of space-borne data sources, offer huge potential to provide solutions to the myriad environmental problems facing society and the planet. The USGS/NASA Landsat Program, the longest continuously gathered source of land surface data, has played a central role in our understanding of environmental change, particularly for its contribution of longitudinal products that offer greater context for present research and decision support activities. The challenge facing the Landsat and EO data community, however, now lies in moving beyond context-specific knowledge generation to translating such knowledge into tangible value for society. Drawing from an open data ecosystem framework and qualitative social science methods, we map the Landsat data ecosystem (LDE) and the relationships linking multiple actors responsible for processing, indexing, analyzing, synthesizing, and translating raw Landsat data into information that is useful, useable, and used by end users in particular social-environmental contexts. Both the role of Big Data and associated technologies are discussed as they relate to the ultimate use of Landsat-derived information products to guide decision-making, and key data ecosystem characteristics that shape the likelihood of these products’ use are highlighted.

Frontiers in Environmental Science↗
USGS2006

Proceedings of the U.S. Geological Survey Sixth Biennial Geographic Information Science Workshop, Denver, Colorado, April 24-28, 2006

The U.S. Geological Survey's (USGS) Sixth Biennial Geographic Information Science Workshop April 24 - 28, 2006, at the Denver Federal Center in Denver, Colorado, provides a unique opportunity for multi-disciplinary Geographic Information Systems (GIS) and associated scientific professionals to share, learn, present, and discuss a wide variety of geospatial-related topics. Information is exchanged through a series of plenary sessions, hands-on technical workshops, user and commercial vendor demonstrations, lecture and poster sessions, and specialty meetings. Workshop attendance is limited to Department of Interior (DOI) and USGS employees and contractors; however, plenary, hands-on, and lecture sessions have presenters from other Federal agencies, numerous commercial vendors, universities, and several consortia. Over 175 participants are expected to attend the Workshop. Several prominent speakers are featured at this Workshop. Monday evening Star Guest Speaker and National Aeronautics and Space Administration (NASA) Astronaut Captain Dominic Gorie will talk about his experiences as a veteran of three space flights and over 32 days in space, including the NASA Space Shuttle Radar Topography Mission that mapped more than 47 million miles of the Earth's land surface. Selected as an astronaut candidate by NASA in December 1994, Captain Gorie is currently Chief of the Astronaut Shuttle Branch. Monday evening also features a town hall meeting with Geographic Information Office (GIO) leaders Karen Siderelis, Kevin Gallagher, Bob Pierce, Steve Guptill, Mark DeMulder, John Mahoney, and Mark Negri, who will discuss changes and activities within the GIO in an open discussion format. Tuesday plenary sessions feature keynote speaker Dr. P. Patrick Leahy, Acting USGS Director. Dr. Leahy holds undergraduate and graduate degrees in geology (1968) and geophysics (1970) from Boston College. In 1979, he received his doctorate in geology from Rensselaer Polytechnic Institute, where he specialized in regional ground-water studies and hydraulics. Dr. Leahy has been with the USGS since 1974, and has held various technical and managerial positions, including Associate Director for Geology and Chief of the National Water-Quality Assessment (NAWQA) Program. Dr. Leahy will be discussing a broad range of topics including Bureau accomplishments, initiatives, and budgets. The purpose of this proceedings volume is to serve as an activity reference for Workshop attendees as well as an archive of technical abstracts submitted, presented, and discussed at the Workshop. Author, co-author, and presenter names, affiliations, and contact information are listed with presentation titles along with submitted abstracts. Some hands-on sessions are offered twice. In these instances, abstracts submitted for publication are presented in the proceedings on both days they are offered. All acronyms used in these proceedings are explained in the text of each abstract. The term 'ArcGIS' refers to an integrated collection of GIS software products produced by Environmental Systems Research Institute, Inc. (ESRI).

Scientific Investigations Report↗
USGS2008

Methane hydrate formation in turbidite sediments of northern Cascadia, IODP Expedition 311

Expedition 311 of the Integrated Ocean Drilling Program (IODP) to northern Cascadia recovered gas-hydrate bearing sediments along a SW-NE transect from the first ridge of the accretionary margin to the eastward limit of gas-hydrate stability. In this study we contrast the gas gas-hydrate distribution from two sites drilled ~ 8??km apart in different tectonic settings. At Site U1325, drilled on a depositional basin with nearly horizontal sedimentary sequences, the gas-hydrate distribution shows a trend of increasing saturation toward the base of gas-hydrate stability, consistent with several model simulations in the literature. Site U1326 was drilled on an uplifted ridge characterized by faulting, which has likely experienced some mass wasting events. Here the gas hydrate does not show a clear depth-distribution trend, the highest gas-hydrate saturation occurs well within the gas-hydrate stability zone at the shallow depth of ~ 49??mbsf. Sediments at both sites are characterized by abundant coarse-grained (sand) layers up to 23??cm in thickness, and are interspaced within fine-grained (clay and silty clay) detrital sediments. The gas-hydrate distribution is punctuated by localized depth intervals of high gas-hydrate saturation, which preferentially occur in the coarse-grained horizons and occupy up to 60% of the pore space at Site U1325 and > 80% at Site U1326. Detailed analyses of contiguous samples of different lithologies show that when enough methane is present, about 90% of the variance in gas-hydrate saturation can be explained by the sand (> 63????m) content of the sediments. The variability in gas-hydrate occupancy of sandy horizons at Site U1326 reflects an insufficient methane supply to the sediment section between 190 and 245??mbsf. ?? 2008 Elsevier B.V.

Earth and Planetary Science Letters↗
USGS2020

A long-term geothermal observatory across subseafloor gas hydrates, IODP Hole U1364A, Cascadia accretionary prism

We report 4 years of temperature profiles collected from May 2014 to May 2018 in Integrated Ocean Drilling Program Hole U1364A in the frontal accretionary prism of the Cascadia subduction zone. The temperature data extend to depths of nearly 300 m below seafloor (mbsf), spanning the gas hydrate stability zone at the location and a clear bottom-simulating reflector (BSR) at ∼230 mbsf. When the hole was drilled in 2010, a pressure-monitoring Advanced CORK (ACORK) observatory was installed, sealed at the bottom by a bridge plug and cement below 302 mbsf. In May 2014, a temperature profile was collected by lowering a probe down the hole from the ROV ROPOS. From July 2016 through May 2018, temperature data were collected during a nearly two-year deployment of a 24-thermistor cable installed to 268 m below seafloor (mbsf). The cable and a seismic-tilt instrument package also deployed in 2016 were connected to the Ocean Networks Canada (ONC) NEPTUNE cabled observatory in June of 2017, after which the thermistor temperatures were logged by Ocean Networks Canada at one-minute intervals until failure of the main ethernet switch in the integrated seafloor control unit in May 2018. The thermistor array had been designed with concentrated vertical spacing around the bottom-simulating reflector and two pressure-monitoring screens at 203 and 244 mbsf, with wider thermistor spacing elsewhere to document the geothermal state up to seafloor. The 4 years of data show a generally linear temperature gradient of 0.055°C/m consistent with a heat flux of 61–64 mW/m 2 . The data show no indications of thermal transients. A slight departure from a linear gradient provides an approximate limit of ∼10 −10 m/s for any possible slow upward advection of pore fluids. In-situ temperatures are ∼15.8°C at the BSR position, consistent with methane hydrate stability at that depth and pressure.

Cascadia subduction zone↗
USGS2010

Seismic hazard assessment: Issues and alternatives

Seismic hazard and risk are two very important concepts in engineering design and other policy considerations. Although seismic hazard and risk have often been used inter-changeably, they are fundamentally different. Furthermore, seismic risk is more important in engineering design and other policy considerations. Seismic hazard assessment is an effort by earth scientists to quantify seismic hazard and its associated uncertainty in time and space and to provide seismic hazard estimates for seismic risk assessment and other applications. Although seismic hazard assessment is more a scientific issue, it deserves special attention because of its significant implication to society. Two approaches, probabilistic seismic hazard analysis (PSHA) and deterministic seismic hazard analysis (DSHA), are commonly used for seismic hazard assessment. Although PSHA has been pro-claimed as the best approach for seismic hazard assessment, it is scientifically flawed (i.e., the physics and mathematics that PSHA is based on are not valid). Use of PSHA could lead to either unsafe or overly conservative engineering design or public policy, each of which has dire consequences to society. On the other hand, DSHA is a viable approach for seismic hazard assessment even though it has been labeled as unreliable. The biggest drawback of DSHA is that the temporal characteristics (i.e., earthquake frequency of occurrence and the associated uncertainty) are often neglected. An alternative, seismic hazard analysis (SHA), utilizes earthquake science and statistics directly and provides a seismic hazard estimate that can be readily used for seismic risk assessment and other applications. ?? 2010 Springer Basel AG.

Pure and Applied Geophysics↗
USGS2013

EAARL coastal topography and imagery–Western Louisiana, post-Hurricane Rita, 2005: First surface

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, Virginia. This project provides highly detailed and accurate datasets of a portion of the Louisiana coastline beachface, acquired post-Hurricane Rita on September 27-28 and October 2, 2005. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the National Aeronautics and Space Administration (NASA) Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Website.

Louisiana↗