Geology ReportsSearch

SEARCH · Geology Reports

Results for “Atmospheric Measurement Techniques”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

470 records · Page 14Linked to original sources

Limited preservation of strike-slip surface displacement in the geomorphic record

Offset geomorphic markers are commonly used to interpret slip history of strike-slip faults and have played an important role in forming earthquake recurrence models. These data sets are typically analyzed using cumulative probability methods to interpret average amounts of slip in past earthquakes. However, interpretation of the geomorphic record to infer surface slip history is complicated by slip variability, measurement uncertainty, and modification of offset features in the landscape. To investigate how well geomorphic data record surface slip, we use offset measurements from recent strike-slip surface ruptures ( n = 39), faults with geomorphic evidence of multiple strike-slip earthquakes ( n = 29), and synthetic slip distributions with added noise ( n > 10,000) to examine the constraints of the geomorphic record and the underlying assumptions of the cumulative offset probability distribution analysis method. We find that the geomorphic record is unlikely to resolve more than two paleo-slip distributions, except in specific cases with low slip variability, high slip-per-event, and semiarid climate. In cases where site-specific conditions allow for interpretation of more than two earthquakes, lateral extrapolation along a fault is not straightforward because on-fault displacement and distributed deformation may be spatially variable in each earthquake. We also find that average slip in modern earthquakes is adequately recovered by probability methods, but the reported prevalence of strike-slip faults with characteristic slip history is not supported by geomorphic data. We also propose updated methods to interpret slip history and construct uncertainty bounds for paleo-slip distributions.

Journal of Geophysical Research: Solid Earth

Per- and polyfluoroalkyl substances (PFAS) mass flux and mass balance at an aqueous film-forming foam release site in semiarid eastern New Mexico, USA

Passive flux meters (PFMs) directly measure groundwater chemistry mass flux and Darcy flux, providing insight into contaminant source-zone architecture and transport properties. This study uses PFMs to characterize PFAS flux in groundwater at a semiarid site with a thick (greater than 90-m) unsaturated zone where groundwater has been contaminated with per - and polyfluoroalkyl substances (PFAS) related to the use of aqueous film-forming foam (AFFF) for fire training and fire suppression. PFAS mass discharge (PFAS mass flux integrated over a control plane) in groundwater downgradient from several PFAS release areas is calculated using PFM results. In groundwater downgradient from fire-training areas, total PFAS mass discharge (summed across 14 compounds) was estimated to be between 6.0 and 31 g per day in 2020 and between 5.9 and 23 g per day in 2021. Site-specific documentation, generic information on AFFF properties, and literature values of PFAS concentration in AFFF are used to estimate site-specific PFAS-application rates at fire-training areas. These PFAS-application rates are compared to groundwater PFAS-discharge rates. Results suggest that transformation processes (exact pathways unknown) have led to increased discharge of measured PFAS in groundwater relative to initial AFFF formulations. The mass balance approach has broad applicability as a high-level approach that can provide insight into PFAS transport at AFFF sites.

New Mexico

Linking stream-reach nitrogen loads and groundwater “reachsheds” to inform wastewater-nitrogen management actions, Cape Cod, Massachusetts

Study Region Cape Cod, Massachusetts, U.S.A. Study Focus Anthropogenic nitrogen (N) is a key factor in degrading groundwater and surface-water quality, particularly in coastal New England where onsite wastewater systems are prevalent. This study evaluated whether direct N-load measurements in streams on Cape Cod, Massachusetts, coupled with flow-path information from groundwater-flow models, can effectively identify potential land areas where nitrogen mitigation could substantially reduce loads to receiving waters. Nitrogen fluxes were measured along 63 stream reaches during winter and summer and paired with simulated groundwater recharge areas to identify and rank potential areas for reduction of nonpoint-source N inputs. New Hydrologic Insights for the Region Reach-scale nitrate-N loads ranged from −39.1–1182 kg-N/yr per 100 m of stream, indicating spatially variable groundwater inputs across seasons. “Reachsheds” — areas contributing groundwater recharge to specific stream reaches — were delineated using a regional groundwater-flow model. Strong correlations were found between observed N loads and land-use characteristics, especially the number of septic systems and total N inputs from the sum of considered sources. Observed N loads were moderately correlated with recharge area size and wastewater flow estimates. Correlating reach-specific groundwater N loads with land use and parcel-scale nitrogen-yield data identified reachsheds with the highest potential for N load reduction. This approach enables targeted implementation of restoration efforts to optimize nutrient management and support regional load reduction.

Massachusetts

The Mammoth magnetic anomaly, Pinal County, Arizona

A high-resolution Earth Mapping Resources Initiative airborne geophysical survey was flown in the southwest North American porphyry copper province to improve bedrock geologic maps and to identify areas that have unrecognized critical mineral resource potential. During the review of the aeromagnetic data, a distinctly monopolar-shaped, negative magnetic anomaly was observed at a flight elevation of 200 m above the ground with a maximum amplitude of –9500 nT. We have named this the Mammoth magnetic anomaly (MMA) because it is centered 12 km northeast of the town of Mammoth, Arizona, USA. The total field anomaly (TFA) contour of –500 nT enclosing the MMA defines an elongate shape measuring 2.5 km long by 1 km wide that trends northwest–southeast. Given the striking nature of this negative, monopolar-shaped magnetic anomaly, we conducted a ground campaign in May 2025 to determine its authenticity and potential relationship to critical mineral endowment. The MMA was confirmed on the ground with a TFA approaching –46,000 nT. Total magnetic intensity (TMI) observations routinely fell below the 18,000 nT operating floor of an industry-standard cesium-vapor total field magnetometer, and extremely low TMI measurements were corroborated along coincident traverse lines using two high dynamic range, but lower sensitivity, smartphone vector magnetometers. The lowest TMI values recorded by both smartphone magnetometers were 1000 nT and confirmed with multiple adjacent and crossing lines. Field observations suggest that this magnetic feature is caused by strong remanent magnetization within fine-grained magnetite hosted within locally altered Pinal Schist.

Arizona

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology

To heal or not to heal?: 1. The effect of pore fluid pressure on the frictional healing behavior of lithologies in Oklahoma

The competition between fault healing (i.e., re-strengthening) and fault loading determines the timing and magnitude of fault failure within the seismic cycle. Repeating earthquakes can give observational estimates of fault healing rates, however, it is difficult to link laboratory studies of frictional healing and observed healing rates from repeating earthquakes in part because of uncertainty in lithology at depth. Due to well-constrained and relatively simple geology, earthquakes in Oklahoma can be linked to the granitic basement rock and to the Arbuckle Group, which is primarily composed of dolomite at earthquake depths. Here, we conduct friction experiments to measure healing rates of the two earthquake-bearing lithologies at confining pressures representative of earthquake depths and pore pressures ranging from 0% to 80% of the confining pressure. We measure frictional healing by executing slide-hold-slide tests with hold times ranging from 3 s to 3000 s. The friction experiments on the Troy Granite indicate that pore fluid pressure does not greatly affect healing rate. On the other hand, the dolomite of the Arbuckle Group exhibits decreased healing with increased pore fluid pressure, with weakening at the highest pore pressure. We hypothesize that this is due to an increase in dissolution of dolomite at high pore pressures/low effective normal stress. These healing rates are used in the companion paper to understand the moment-recurrence time behavior of repeating earthquakes in Prague, Oklahoma. This work has implications for possible enhanced dissolution and weakening behavior of the Arbuckle Group during wastewater injection activities.

Oklahoma

Prioritizing US Geological Survey science on salinization and salinity in candidate and selected priority river basins

The US Geological Survey (USGS) is selecting and prioritizing basins, known as Integrated Water Science basins, for monitoring and intensive study. Previous efforts to aid in this selection process include a scientifically defensible and quantitative assessment of basins facing human-caused water resource challenges (Van Metre et al. in Environmental Monitoring and Assessment , 192(7), 458 2020). In the present work, we explore this ranking process based on water quality considerations, specifically salinity and salinization. We selected top candidate basins to study salinity and salinization issues in 18 hydrologic regions that include 163 candidate basins. Our prioritization is based on quantitative assessment of sources of salinity, drivers of change, and receptors that must respond to those sources and drivers. Source terms represented in the prioritization include geology, depth to brackish groundwater, stream conductivity, chloride in precipitation, urban and agricultural land use, application of road salt as a deicer, and irrigation. Drivers represented in prioritization include changes in chemical weathering as a result of changes in rainwater chemistry. Receptors include measures of water stress, measurements of stream ecological health, and socioeconomic factors. In addition, we present research activities for the USGS on salinity and salinization that can be pursued in these basins including assessment of sources, pathways, and loadings; predicting and understanding changes in sources, peaks, and trends; understanding the components of salinity and mobilization of contaminants; understanding the relationship between salinization and changing ecosystems; and developing knowledge on the causes and distribution of groundwater salinity, brackish water resources, and challenges related to desalination.

Enviornmental Monitoring and Assessment

Are field observations of surface rupture useful? An example from the 2023 Mw 7.8 Pazarcık, Turkey (Türkiye), earthquake

Field investigations have long been an important component of the scientific response to surface‐faulting earthquakes. However, in light of advances in remote data and models, the question arises whether field‐based observations of surface rupture remain useful for understanding rupture processes and seismic hazards. We approach this question using a field‐based study of the central 2023 M w 7.8 Pazarcık, Turkey (Türkiye), earthquake rupture, at the intersection of the east Anatolian fault (EAF) and Narlı fault. Our field observations include the surface rupture expression and extent of the central EAF and northernmost Narlı fault in generally forested and steep terrain and 68 measurements of left‐lateral surface displacement. These data improve our understanding of the Pazarcık rupture complexity, resolve the surface geometry of the Narlı fault–EAF connection, and exhibit a clear (>2 m) change in surface displacement across this intersection zone that confirms remote‐based coseismic slip models. Our study shows that focusing field efforts in areas of obscured or low‐resolution remote data can yield essential data for refining rupture extent, documenting perishable on‐fault displacement, and improving postearthquake situational awareness. A comparison of similarly large‐magnitude continental surface‐rupturing earthquakes indicates that displacement uncertainties relate to a complex set of factors, including measurement methods, rupture complexity, and displacement magnitude. Our study validates the need for postearthquake field observations, which, when driven by clear motivating questions and knowledge of methodological strengths and limitations, provide high‐resolution rupture data that complement remote‐based models.

Pazarcık

Reconnaissance of potential alternate water supply sources for the City of Gary, West Virginia

Seven potential sources of water, consisting of free-flowing discharge from abandoned coal mines at six locations and one abandoned flooded underground coal mine air shaft, were sampled for chemical analysis to assess the quality of the groundwater emanating from the seven mine sources. The six free-flowing mine discharge sources were also assessed for discharge by current-meter measurements on two separate occasions. The U.S. Geological Survey assessed these seven sources to provide information to the City of Gary, West Virginia (W. Va.), and the City of Gary’s consulting engineer with groundwater-quality and flow data to allow them to assess the seven sites as potential alternate sources of water for the City of Gary to augment its existing supply. For the six sites where discharge could be measured, discharge ranged from a minimum of 0.082 cubic feet per second (ft 3 /s) to a maximum of 3.685 ft 3 /s. Of the six sites measured, only two, Harmon Branch at Thorpe, W. Va. (USGS site 372201081303501) and the abandoned public-supply water wells near Havaco, W. Va. (USGS site 372358081344601), had discharge in excess of 1.00 ft 3 /s. Discharge from the abandoned public supply wells was 3.685 ft 3 /s on September 20, 2023, and 2.888 ft 3 /s on October 16, 2023, and discharge from Harmon Branch at Thorpe, W. Va., was 1.049 ft 3 /s on September 22, 2023, and 1.038 ft 3 /s on October 17, 2023. Discharge in the abandoned underground mine air shaft (USGS site 372224081340901) could not be assessed, but the air shaft drains an abandoned mine that likely contains water stored in approximately 1.7 square miles (mi 2 ) of abandoned underground coal mines in the Pocahontas No. 3 coal seam, and possibly an additional 0.9 mi 2 of leakage from the overlying Pocahontas No. 4 coal seam. Discharge for the six sites measured for the study was measured during a period between September 20 and October 18, 2023, and corresponded to the 12th to the 15th percentile of flow-duration statistics for the Tug Fork downstream of Elkhorn Creek at Welch, W. Va. streamgage (USGS site 03212750). Water-quality data for the seven sites sampled overall were acceptable with respect to drinking water standards. Of the 203 constituents analyzed, only a few failed to meet applicable U.S. Environmental Protection Agency (EPA) drinking water standards. Iron exceeded the 300 micrograms per liter (μg/L) secondary maximum contaminant level (SMCL) at only 1 of the 7 sites (14.3 percent) sampled. Iron concentrations ranged from a minimum of less than (<) 5.00 μg/L to a maximum of 724 μg/L with a median concentration of 7.62 μg/L. Manganese exceeded the 50.0 μg/L SMCL at 2 of the 7 sites (28.6 percent) sampled. Manganese concentrations ranged from a minimum of 1.93 μg/L to a maximum of 271 μg/L with a median concentration of 4.03 μg/L. No sites sampled exceeded the arsenic maximum contaminant level (MCL) of 10 μg/L. Arsenic concentrations ranged from a minimum of <0.100 μg/L to a maximum of 2.35 μg/L with a median arsenic concentration of 0.200 μg/L. None of the seven sites sampled for selenium for this study exceeded the EPA MCL of 50.0 μg/L. Selenium concentrations ranged from a minimum of <0.050 μg/L to a maximum of 5.26 μg/L with a median concentration of 3.21 μg/L. All seven sites were sampled for volatile organic compounds (VOCs), semivolatile organic compounds (SVOCs), and polychlorinated biphenyls (PCBs), but most had concentrations below the detection limit. Of the 10 PCB compounds analyzed for the seven sites sampled, none contained detectable concentrations of PCBs or Aroclor compounds. Of the 44 SVOCs analyzed at each of the seven sites sampled, only 1 SVOC, acenaphthene, was detected, at a concentration of 0.02 μg/L. Of the 96 VOCs analyzed, from each of the seven sites sampled, only two were found at detectable concentrations. Trichloromethane was detected only at 1 of the 7 (14.3 percent) sites sampled at a concentration of 0.027 μg/L, and benzene was detected at the same site and 3 additional sites (4 of the 7 sites or 57.1 percent of the sites sampled) at concentrations of 0.028, 0.029, 0.021, and 0.035 μg/L, but none exceeded the EPA MCL for benzene of 5.00 μg/L. Total coliform bacteria are ubiquitous in the environment, and their presence only suggests the potential for contamination by near-surface processes. Escherichia coli ( E. coli ) bacteria are derived from either human or animal fecal material and can be an indicator of potential contamination by pathogenic bacteria or viruses. Total coliform bacteria were detected at all 7 sites sampled at concentrations ranging from 17.5 to greater than (>) 2,420 most probable number per 100 mL (MPN/100 mL) of sample, with a median total coliform concentration of 1,553 MPN/100 mL. Escherichia coli bacteria were detected at 4 of the 7 sites sampled at concentrations ranging from <1 to 11.9 MPN/100 mL, with a median E. coli concentration of 5.1 MPN/100 mL.

West Virginia

Evaluation of models for estimating hydraulic conductivity in glacial aquifers from NMR logging

Nuclear magnetic resonance (NMR) logging is a promising method for estimating hydraulic conductivity ( K ). During the past ∼60 years, NMR logging has been used for petroleum applications, and different models have been developed for deriving estimates of permeability. These models involve calibration parameters whose values were determined through decades of research on sandstones and carbonates. We assessed the use of five models to derive estimates of K in glacial aquifers from NMR logging data acquired in two wells at each of two field sites in central Wisconsin, USA. Measurements of K , obtained with a direct push permeameter (DPP), K DPP , were used to obtain the calibration parameters in the Schlumberger-Doll Research, Seevers, Timur-Coates, Kozeny-Godefroy, and sum-of-echoes (SOE) models so as to predict K from the NMR data; and were also used to assess the ability of the models to predict K DPP . We obtained four well-scale calibration parameter values for each model using the NMR and DPP measurements in each well; and one study-scale parameter value for each model by using all data. The SOE model achieved an agreement with K DPP that matched or exceeded that of the other models. The Timur-Coates estimates of K were found to be substantially different from K DPP . Although the well-scale parameter values for the Schlumberger-Doll, Seevers, and SOE models were found to vary by less than a factor of 2, more research is needed to confirm their general applicability so that site-specific calibration is not required to obtain accurate estimates of K from NMR logging data.

Wisconsin

Stream habitat characteristics at selected sites in the Georgia-Florida coastal plain

Habitat characterization is part of a multidisciplinary approach to water-quality assessment implemented by the National Water-Quality Assessment Program. Habitat data were collected in the Georgia-Florida Coastal Plain study unit at 24 sites during 1993-95. Data were collected for habitat characteristics at three spatial scales: basin, segment, and reach. Basin data include physiography, land resource provinces, and land use, providing a description of the environmental setting at each site. Segment data include length, gradient, and sinuosity. A Kendall correlation analysis performed on segment characteristics and the log-of-basin area showed a correlation between segment gradient and the log-of-basin area and a correlation between sinuosity and segment length. Reach data consist of field-collected measurements of both instream and riparian habitats. Sand and detritus were the most common channel-bed substrates among the sampled sites. Measurements of channel width, water depth, and bank width and height were used to create cross-sectional profiles of each sampled area. Elevations of selected durations plotted on cross sections illustrated the percentage of time that the banks were inundated at each site. Sites were divided into two groups based on duration of bank inundation (less than or equal to 1 percent and greater than 1 percent). Bank woody vegetation was also sampled and a clustering algorithm known as Two-Way INdicator SPecies ANalysis (TWINSPAN) was used to analyze these data. TWINSPAN divided the sites into two groups based on their vegetation composition. A statistical comparison of the two types of site groups (duration of bank inundation and vegetation) was performed. The significant association between these groups was consistent with the hypothesis that inundation frequency affected riparian vegetation.

Florida, Georgia

Streamflow, ground-water recharge and discharge, and characteristics of surficial deposits in Buzzards Bay Basin, southeastern Massachusetts

Streamflow measurements at 14 low-flow partial-record stations and two discontinued streamflow-gaging stations were related to concurrent streamflows at six long-term streamflow-gaging stations to estimate streamflows at selected flow durations from 50 to 99 percent for water years 1967-91. At low flows, stream discharge per square mile generally increased with increasing percentage of subbasin underlain by stratified-drift deposits. At the 70-, 90-, and 99-percent flow durations, subbasins underlain primarily by stratified-drift deposits had stream discharges per square mile at least 2, 4, and 8 times greater, respectively, than subbasins underlain primarily by till and bedrock deposits. Streamflow measured three times at the Paskamanset River showed that streamflows downstream of municipal pumped wells increased at a lower rate per unit drainage area than streamflows upstream of the pumped wells. When pumpage from wells near the river was added to measured streamflow at the most downstream station, the sum was similar to the potential streamflow at the station if its streamflow per unit area was the same as that upstream from the pumped wells. Mean ground-water recharge and discharge rates were computed from continuous records of daily mean discharge during water years 1967-91 for six streamflow-gaging stations in southeastern Massachusetts and Rhode Island. Estimates of mean ground-water recharge were 19.7 to 22.6 inches per year for stations with drainage areas primarily underlain by till and bedrock deposits, and 23.8 to 25.2 inches per year for stations with drainage areas primarily underlain by stratified-drift deposits. During drought years, annual ground-water recharge can be less than 50 percent of the mean ground-water recharge rate for water years 1967-91. Estimates of ground-water discharge rates generally were 1 to 4 inches per year less than estimates of ground-water recharge rates. Ground-water discharge-duration curves were calculated from hydrograph separation of streamflow records at the six continuous streamflow-gaging stations for water years 1967-91. When streamflows were less than the median streamflow (50-percent duration), ground-water discharges averaged 85.7 percent of the total streamflow at the six streamflow-gaging stations. Ground-water discharges were estimated at the 14 low-flow partial-record stations and two discontinued streamflow-gaging stations by multiplying streamflows at the selected flow durations from 50 to 99 percent for water years 1967-91 by 85.7 percent. Data on surficial deposits in the basin were obtained by drilling 10 wells, by conducting 12 seismic-refraction surveys, and by collecting well log data for 313 wells from consulting firms and the Massachusetts Department of Environmental Management. These data indicated that a few minor corrections could be made to existing saturated thickness maps for stratified-drift deposits in Buzzards Bay Basin. Few well logs were detailed enough to estimate transmissivities; thus existing transmissivity maps were not updated for stratified-drift deposits in the basin.

Massachusetts

Land-based nutrient flux to a fringing reef: Insights from Ofu Island, American Samoa

Submarine groundwater discharge (SGD) is a critical driver of nutrient transport in coral reef ecosystems, shaping water quality, primary productivity, and overall reef health. This study quantifies SGD fluxes and associated nutrient dynamics in two reef flat pools within the Ofu Unit of the National Park of American Samoa: Papaloloa and Fatuana. A multi-method approach integrating unoccupied aerial system-based thermal infrared (UAS-TIR) surveys, radon-based SGD measurements, multichannel electrical resistivity tomography (ERT), and discrete water sampling was used to assess SGD rates and nutrient contributions. UAS-TIR imagery revealed cooler sea surface temperatures in both pools, indicative of SGD, with the higher fluxes observed in Papaloloa. Radon measurements revealed a strong inverse correlation between SGD rates and tidal stage, with a more immediate SGD response at Papaloloa due to its highly permeable calcareous sand and gravel substrate. In contrast, a 2–3-hour lag in SGD response at Fatuana suggests discharge from a more inland aquifer that has lower diffusivity. Nutrient concentrations correlated with temperature and salinity, confirming SGD as the dominant nutrient transport mechanism, whereas isotopic analyses indicated inputs from both groundwater and potential anthropogenic sources. Despite lower SGD flux at Fatuana, higher algal cover suggests additional factors influencing algal proliferation, including substrate availability and hydrodynamic conditions. Excess nutrient inputs from SGD may contribute to algal overgrowth, which threatens Ofu’s thermally tolerant corals by increasing competition for space and light. These findings underscore the complexity of SGD-mediated nutrient dynamics in reef environments and emphasize the need for integrated hydrological and ecological assessments to support effective reef conservation and management strategies.

American Samoa, Ofu Island, Olosega Island

RioM-1: A new calcite reference material for U-Pb LA-ICP-MS geochronology

Determining absolute ages of carbonate diagenesis, faulting, fossil formation, speleothem growth, carbonate-hosted hydrocarbon deposits, vein mineralisation and hydrothermal alteration has become increasingly accessible through LA-ICP-MS U-Pb dating of calcite, complementing traditional isotope dilution methods still applicable to certain materials (e.g., speleothems via micro-drilling). However, well-calibrated reference materials for LA-ICP-MS calcite geochronology remain scarce. Here, we characterise the Rio Maior calcite, designated ‘RioM-1’, as a potential reference material for U-Pb dating by LA-ICP-MS. Fragments (0.1 to 1 cm 3 ) from a single scalenohedral crystal were analysed by ID-TIMS (U-Pb), LA-ICP-MS (U-Pb and 87 Sr/ 86 Sr), and SIMS (O isotopes). RioM-1 displays high U mass fraction and low, though variable, proportions of common Pb. Combined ID-TIMS analyses from two independent laboratories yielded a Tera-Wasserburg lower intercept date of 63.93 ± 0.11 Ma (2 s , MSWD = 1.3, n = 16). LA-ICP-MS U-Pb data from three independent laboratories are concordant with the TIMS age, producing a pooled date of 64.10 ± 0.12/1.2 Ma (2 s , MSWD = 7.7, n = 708) and an initial 207 Pb/ 206 Pb ratio of 0.85 ± 0.01. Other calcite reference materials, when normalised to RioM-1, yielded dates within uncertainty of their published values. SIMS measurements returned a mean 18 O/ 16 O of 0.002044450 ± 181 (1 s ) and δ 18 O SMOW of 19.57 ± 0.92‰ (1 s ), while LA-ICP-MS strontium isotope measurement yielded a mean 87 Sr/ 86 Sr of 0.708177 ± 9 (2 s ).

Geostandards and Geoanalytical Research

Assessment of coastal and fluvial morphodynamic changes using Structure-for-Motion: A case study of the Sfȃntu Gheorghe Mouth (Danube Delta, Romania)

The ability to accurately map erosion, flooding, and habitat loss in coastal environments is crucial for formulating national strategies aimed at preventing and mitigating the impacts of natural disasters. A fundamental component of this process is the implementation of coastal morphodynamics monitoring through Structure-from-Motion (SfM) techniques, utilizing high-resolution 2D/3D data obtained from aerial photogrammetry. To assess morphodynamic changes over a three-year period (2022 – 2024), several SfM-based photogrammetric studies were conducted, each year, in the Romanian sector of the Danube-Black Sea coastal zone, specifically at the mouth of one of the Danube River distributaries (Sf Gheorghe branch) into the Black Sea, and along the left bank, near Sf Gheorghe locality, located within the Danube Delta Biosphere Reserve (DDBR). The essential equipment for aerial photogrammetry comprises Unmanned Aerial Vehicles (UAVs) and Global Navigation Satellite Systems (GNSS). In this study, the UAV used was a DJI Mavic 3T (Enterprise/Thermal) drone, complemented by two Trimble R12i and R4 GNSS systems, as well as approximately 10 Ground Control Points (GCPs). Data acquisition and processing were carried out using specialized photogrammetric software (Agisoft Metashape) along with various GIS tools (e.g., Blue Marble Geographics Global Mapper and ESRI ArcMap). The photogrammetric products generated for the study, as detailed in this paper, include Digital Elevation Models (DEMs), Digital Terrain Models (DTMs), orthomosaics (orthophotos), and others. At Sfântu Gheorghe beach, a comparison between 2023 and 2024 photogrammetric surveys revealed that the left bank of the Sf. Gheorghe Arm, at the river mouth into the Black Sea, suffered from a twist (erosion) of up to 64 metres. Additionally, on the selected perimetre (total area of 31,910 square meters ) from the beach and dune zone of Sf. Gheorghe, an area of up to 16,202 square meters was eroded between 2023 and 2024. This contrasts with the period between 2022 and 2023, during which deposition predominated. Erosion at the Danube mouths and the adjacent Black Sea coastline is driven by a complex interaction of natural and anthropogenic factors. Natural processes, including subsidence, sea-level rise, and episodic extreme storm events, contribute significantly to coastal dynamics. Meanwhile, human-induced factors, such as upstream hydrotechnical works that limits sediment transport, cutting of navigation canals, as well as the exacerbating effects of climate change, further accelerate erosion. The recent Structure-from-Motion (SfM) surveys provide essential quantitative data, enabling a detailed analysis of both short-term and long-term morphodynamic changes influenced by seasonal variations and extreme hydrometeorological events in this highly dynamic coastal system.

Sfȃntu Gheorghe Mouth (Danube Delta)

Base flow and ground water in upper Sweetwater Valley, Tennessee

The upper Sweetwater Valley area has a flow system with complex interaction between surface and ground water. A water budget study indicated that during dry years approximately three-fourths of the annual flow to Sweetwater Creek may be derived from ground-water sources. Hydrograph analysis showed seasonal variation of recharge to the ground-water flow system. Streamflow records were analyzed to estimate the frequency of low flow of Sweetwater Creek at river mile 16.7, and indicated the lowest average flow for 1 day in 20 years to be about 5.1 cubic feet per second. Two periods of base-flow measurements of Sweetwater Creek identified channel reaches with significant gains and losses of streamflow. Base flow measurements also showed interbasin transfer of water among sub-basins of the valley. Major flow surpluses were associated with areas in which the majority of flow originated at a spring. Topographically low areas adjacent to the main stem of Sweetwater Creek generally have surplus flow. Topographically higher areas generally have deficient surface outflow unless significant spring flow occurs in the basin. Ground-water recharge occurs by water draining into sinkholes, faults, and fractures. Ground-water flow is regionally diffused across formation strikes from the topographically low areas unless the water is exposed to highly permeable formations or impervious formations. Ground water infiltrates the highly permeable formations and flows along strike. Ground water encountering impervious formations may discharge at small springs at the contact, or may reroute along the contact if the upgradient rock is sufficiently permeable or has well developed secondary porosity. Groundwater discharges to streams at innumerable seeps and at a few large springs. Areas of ground-water flow up-gradient of large springs are hypothesized as likely areas of significant ground-water reservoirs.

Tennessee

Representation of surface-water flows using Gradient-Related Discharge in an Everglades Network

The Everglades Depth Estimation Network interpolates water-level gage data to produce daily water-level elevations for the Everglades in south Florida. These elevations were used to estimate flow vectors (gradients and directions) and volumetric flow rates using the Gradient-Related Discharge in an Everglades Network (GARDEN) application developed by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers. Flow rates in both the east-west and north-south directions were computed on a 400-meter square grid using modified parameters in the Manning’s equation. The frictional resistance parameter in the Manning’s equation was calibrated to measured flow rates at coastal creeks fed by Everglades Depth Estimation Network boundary flows. Levees and other features that act as barriers to flow were defined as “no-flow” grid cells where vectors were set to zero. The flow volume magnitudes were calibrated with 2020 daily values of coastal river flows, and verification was performed using 2021 data. Within a given day, the measured coastal river flows fluctuate more than the GARDEN boundary flows because of tidal and wind forcings. Because the GARDEN boundary flows were the upstream water source for the coastal rivers, calibration focused on matching average daily flow volumes rather than daily fluctuations. The Pearson’s correlation coefficient is 0.766 for the 2020 calibration period and 0.566 for the 2021 verification period. Applying GARDEN to periods with hydraulic-control-structure releases allows the propagation of structure flows to be seen in the daily flow-vector maps along with the multiday response of flows farther downgradient. Flow vectors may be overestimated near control structures because of difficulties in resolving the water gradient downstream from the structure. Flow vectors farther from the structure are more accurate than those near the structure.

Florida

The 2023 US 50-State National Seismic Hazard Model: Overview and implications

The US National Seismic Hazard Model (NSHM) was updated in 2023 for all 50 states using new science on seismicity, fault ruptures, ground motions, and probabilistic techniques to produce a standard of practice for public policy and other engineering applications (defined for return periods greater than ∼475 or less than ∼10,000 years). Changes in 2023 time-independent seismic hazard (both increases and decreases compared to previous NSHMs) are substantial because the new model considers more data and updated earthquake rupture forecasts and ground-motion components. In developing the 2023 model, we tried to apply best available or applicable science based on advice of co-authors, more than 50 reviewers, and hundreds of hazard scientists and end-users, who attended public workshops and provided technical inputs. The hazard assessment incorporates new catalogs, declustering algorithms, gridded seismicity models, magnitude-scaling equations, fault-based structural and deformation models, multi-fault earthquake rupture forecast models, semi-empirical and simulation-based ground-motion models, and site amplification models conditioned on shear-wave velocities of the upper 30 m of soil and deeper sedimentary basin structures. Seismic hazard calculations yield hazard curves at hundreds of thousands of sites, ground-motion maps, uniform-hazard response spectra, and disaggregations developed for pseudo-spectral accelerations at 21 oscillator periods and two peak parameters, Modified Mercalli Intensity, and 8 site classes required by building codes and other public policy applications. Tests show the new model is consistent with past ShakeMap intensity observations. Sensitivity and uncertainty assessments ensure resulting ground motions are compatible with known hazard information and highlight the range and causes of variability in ground motions. We produce several impact products including building seismic design criteria, intensity maps, planning scenarios, and engineering risk assessments showing the potential physical and social impacts. These applications provide a basis for assessing, planning, and mitigating the effects of future earthquakes.

Earthquake Spectra