SEARCH · Geology Reports

Results for “Tectonics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources

USGS1999

Tectonic and sediment supply control of deep rift lake turbidite systems: Lake Baikal, Russia

Tectonically influenced half-graben morphology controls the amount and type of sediment supply and consequent type of late Quaternary turbidite systems developed in the active rift basins of Lake Baikal, Russia. Steep border fault slopes (footwall) on the northwest sides of half-graben basins provide a limited supply of coarser grained clastic material to multiple small fan deltas. These multiple sediment sources in turn laterally feed small (<10 km diameter) unchannelized sublacustrine sand-rich aprons that are deposited at the slope base on the lake floor. Gradual slopes of the southeastern ramp margins (hanging wall) of the lake basins, conversely, feed finer grained sediment from larger drainages into two different types of channelized turbidite sublacustrine fan systems: (1) small (5–20 km) laterally fed sand-rich fans sourced by local rivers, often originating from glaciated valleys; and (2) large (>65 km) axially fed elongate mud-rich fans sourced by regional exterior drainage of the Selenga River that supplies large quantities of silt. Basin plain turbidites in the center of the linear basins and axial channels that are controlled by rift-parallel faults are fed from, and interfinger with, aprons and fans. The predictability of the turbidite systems in Lake Baikal provides the best example yet studied of how tectonics and sediment supply interact to control the development of a wide variety of coeval turbidite systems on a single basin floor.

Geology↗

USGS2009

Postimpact deposition in the Chesapeake Bay impact structure: Variations in eustasy, compaction, sediment supply, and passive-aggressive tectonism

The Eyreville and Exmore, Virginia, core holes were drilled in the inner basin and annular trough, respectively, of the Chesapeake Bay impact structure, and they allow us to evaluate sequence deposition in an impact crater. We provide new high-resolution geochronologic (<1 Ma) and sequence-stratigraphic interpretations of the Exmore core, identify 12 definite (and four possible) postimpact depositional sequences, and present comparisons with similar results from Eyreville and other mid- Atlantic core holes. The concurrence of increases in ?? 18 O with Chesapeake Bay impact structure sequence boundaries indicates a primary glacioeustatic control on deposition. However, regional comparisons show the differential preservation of sequences across the mid-Atlantic margin. We explain this distribution by the compaction of impactites, regional sediment-supply changes, and the differential movement of basement structures. Upper Eocene strata are thin or missing updip and around the crater, but they thicken into the inner basin (and offshore to the southeast) due to rapid crater infilling and concurrent impactite compaction. Oligocene sequences are generally thin and highly dissected throughout the mid-Atlantic region due to sediment starvation and tectonism, except in southeastern New Jersey. Regional tectonic uplift of the Norfolk Arch coupled with a southward decrease in sediment supply resulted in: (1) largely absent Lower Miocene sections around the Chesapeake Bay impact structure compared to thick sections in New Jersey and Delaware; (2) thick Middle Miocene sequences across the Delmarva Peninsula that thin south of the Chesapeake Bay impact structure; and (3) upper Middle Miocene sections that pinch out just north of the Chesapeake Bay impact structure. Conversely, the Upper Miocene-Pliocene section is thick across Virginia, but it is poorly represented in New Jersey because of regional variations in relative subsidence.

Chesapeake Bay↗

USGS2013

Structure and tectonic evolution of the eastern Española Basin, Rio Grande rift, north-central New Mexico

We describe the structure of the eastern Española Basin and use stratigraphic and stratal attitude data to interpret its tectonic development. This area consists of a west-dipping half graben in the northern Rio Grande rift that includes several intrabasinal grabens, faults, and folds. The Embudo–Santa Clara–Pajarito fault system, a collection of northeast- and north-striking faults in the center of the Española Basin, defines the western boundary of the half graben and was active throughout rifting. Throw rates near the middle of the fault system (i.e., the Santa Clara and north Pajarito faults) and associated hanging-wall tilt rates progressively increased during the middle Miocene. East of Española, hanging-wall tilt rates decreased after 10–12 Ma, coinciding with increased throw rates on the Cañada del Almagre fault. This fault may have temporarily shunted slip from the north Pajarito fault during ca. 8–11 Ma, resulting in lower strain rates on the Santa Clara fault. East of the Embudo–Santa Clara–Pajarito fault system, deformation of the southern Barrancos monocline and the Cañada Ancha graben peaked during the early–middle Miocene and effectively ceased by the late Pliocene. The north-striking Gabeldon faulted monocline lies at the base of the Sangre de Cristo Mountains, where stratal dip relations indicate late Oligocene and Miocene tilting. Shifting of strain toward the Embudo–Santa Clara–Pajarito fault system culminated during the late Pliocene–Quaternary. Collectively, our data suggest that extensional tectonism in the eastern Española Basin increased in the early Miocene and probably peaked between 14–15 Ma and 9–10 Ma, preceding and partly accompanying major volcanism, and decreased in the Plio-Pleistocene.

New Mexico↗

USGS2015

Composite Sunrise Butte pluton: Insights into Jurassic–Cretaceous collisional tectonics and magmatism in the Blue Mountains Province, northeastern Oregon

The composite Sunrise Butte pluton , in the central part of the Blue Mountains Province, northeastern Oregon, preserves a record of subduction-related magmatism, arc-arc collision, crustal thickening, and deep-crustal anatexis. The earliest phase of the pluton (Desolation Creek unit) was generated in a subduction zone environment, as the oceanic lithosphere between the Wallowa and Olds Ferry island arcs was consumed. Zircons from this unit yielded a 206 Pb/ 238 U age of 160.2 ± 2.1 Ma. A magmatic lull ensued during arc-arc collision, after which partial melting at the base of the thickened Wallowa arc crust produced siliceous magma that was emplaced into metasedimentary rocks and serpentinite of the overthrust forearc complex. This magma crystallized to form the bulk of the Sunrise Butte composite pluton (the Sunrise Butte unit; 145.8 ± 2.2 Ma). The heat necessary for crustal anatexis was supplied by coeval mantle-derived magma (the Onion Gulch unit; 147.9 ± 1.8 Ma). The lull in magmatic activity between 160 and 148 Ma encompasses the timing of arc-arc collision (159-154 Ma), and it is similar to those lulls observed in adjacent areas of the Blue Mountains Province related to the same shortening event. Previous researchers have proposed a tectonic link between the Blue Mountains Province and the Klamath Mountains and northern Sierra Nevada Provinces farther to the south; however, timing of Late Jurassic deformation in the Blue Mountains Province predates the timing of the so-called Nevadan orogeny in the Klamath Mountains. In both the Blue Mountains Province and Klamath Mountains, the onset of deep-crustal partial melting initiated at ca. 148 Ma, suggesting a possible geodynamic link. One possibility is that the Late Jurassic shortening event recorded in the Blue Mountains Province may be a northerly extension of the Nevadan orogeny. Differences in the timing of these events in the Blue Mountains Province and the Klamath-Sierra Nevada Provinces suggest that shortening and deformation were diachronous, progressing from north to south. We envision that Late Jurassic deformation may have collapsed a Gulf of California-style oceanic extensional basin that extended from the Klamath Mountains (e.g., Josephine ophiolite) to the central Blue Mountains Province, and possibly as far north as the North Cascades (i.e., the coeval Ingalls ophiolite). The lull in magmatic activity between 160 and 148 Ma encompasses the timing of arc-arc collision (159–154 Ma), and it is similar to those lulls observed in adjacent areas of the Blue Mountains Province related to the same shortening event. Previous researchers have proposed a tectonic link between the Blue Mountains Province and the Klamath Mountains and northern Sierra Nevada Provinces farther to the south; however, timing of Late Jurassic deformation in the Blue Mountains Province predates the timing of the so-called Nevadan orogeny in the Klamath Mountains. In both the Blue Mountains Province and Klamath Mountains, the onset of deep-crustal partial melting initiated at ca. 148 Ma, suggesting a possible geodynamic link. One possibility is that the Late Jurassic shortening event recorded in the Blue Mountains Province may be a northerly extension of the Nevadan orogeny. Differences in the timing of these events in the Blue Mountains Province and the Klamath–Sierra Nevada Provinces suggest that shortening and deformation were diachronous, progressing from north to south. We envision that Late Jurassic deformation may have collapsed a Gulf of California–style oceanic extensional basin that extended from the Klamath Mountains (e.g., Josephine ophiolite) to the central Blue Mountains Province, and possibly as far north as the North Cascades (i.e., the coeval Ingalls ophiolite).

Idaho, Oregon↗

USGS2022

A refined assessment of the paleoceanographic and tectonic influences on the deposition of the Monterey Formation in California

Application of updated diatom biochronology to the Monterey Formation and related biosiliceous rocks reveals the imprint of both global paleoclimatic/ paleoceanographic and regional tectonic events. A rise in global sea level combined with regional tectonic deepening associated with the development of the transform California margin resulted in the abrupt onset of deposition of fine-grained Monterey sediments between 18 and 16 Ma. The base of the Monterey does not mark a silica shift in diatom deposition from the North Atlantic to the North Pacific. Rather, a North Atlantic decline of diatoms after ~13 Ma and increasing divergence in nutrient levels between the North Atlantic and North Pacific between ~13 and 11 Ma, coincided with a major enhancement of diatom deposition in the Monterey Formation. A stratigraphically condensed interval of phosphate-rich sediments between 13 and 10 Ma in coastal southern California appears to have resulted from sediment starvation on offshore banks during a period of higher sea level, as inland sections commonly contain thick sequences of diatomaceous sediment. Increasing latitudinal thermal gradients in the latest Miocene, which triggered a biogenic bloom in the equatorial Pacific at 8 Ma, also lead to enhanced diatom deposition in the uppermost Monterey and overlying biosiliceous rocks. Uplift of the California coastal ranges after ~5.2 Ma resulted in an increasing detrital contribution that obscured the presence of diatoms in onshore sediments. Major reduction in coastal upwelling in the early Pliocene at ~4.6 Ma caused a drastic reduction of diatoms in sediments of offshore southern California.

California↗

USGS2023

Geology along the Yuba Pass and Highway 70 corridors: A complex history of tectonics and magmatism in the northern Sierra Nevada

This field trip traverses a cross section of northern Sierra Nevada geology and landscape along two major corridors, Highway 49 (Yuba Pass) and Highway 70. These highways, and adjacent roadways, offer roadcuts, outcrops, and overviews through diverse pre-Cenozoic metamorphic rocks along the Laurentian margin, Mesozoic batholithic rocks, and Miocene volcanic rocks. Observing this array of rocks on a single trip provides an opportunity to examine the progression of tectonic forces in this region since the Paleozoic Era. Inspiration for this trip is a 1:100,000-scale geologic map and geophysical maps of the Portola 30′ × 60′ quadrangle that integrate decades of published and unpublished mapping with new geophysical data. The quadrangle map will seamlessly depict a geologically complex region along the boundary between the Sierra Nevada and Basin and Range provinces, dominated by transtensional tectonics of the Walker Lane. This field trip highlights many of the major units of the geologic map and will also feature new geochronological data on plutonic rocks.

California↗

USGS2003

Hydrothermal and tectonic activity in northern Yellowstone Lake, Wyoming

Yellowstone National Park is the site of one of the world's largest calderas. The abundance of geothermal and tectonic activity in and around the caldera, including historic uplift and subsidence, makes it necessary to understand active geologic processes and their associated hazards. To that end, we here use an extensive grid of high-resolution seismic reflection profiles (∼450 km) to document hydrothermal and tectonic features and deposits in northern Yellowstone Lake. Sublacustrine geothermal features in northern Yellowstone Lake include two of the largest known hydrothermal explosion craters, Mary Bay and Elliott's. Mary Bay explosion breccia is distributed uniformly around the crater, whereas Elliott's crater breccia has an asymmetric distribution and forms a distinctive, ∼2-km-long, hummocky lobe on the lake floor. Hydrothermal vents and low-relief domes are abundant on the lake floor; their greatest abundance is in and near explosion craters and along linear fissures. Domed areas on the lake floor that are relatively unbreached (by vents) are considered the most likely sites of future large hydrothermal explosions. Four submerged shoreline terraces along the margins of northern Yellowstone Lake add to the Holocene record of postglacial lake-level fluctuations attributed to “heavy breathing” of the Yellowstone magma reservoir and associated geothermal system. The Lake Hotel fault cuts through northwestern Yellowstone Lake and represents part of a 25-km-long distributed extensional deformation zone. Three postglacial ruptures indicate a slip rate of ∼0.27 to 0.34 mm/yr. The largest (3.0 m slip) and most recent event occurred in the past ∼2100 yr. Although high heat flow in the crust limits the rupture area of this fault zone, future earthquakes of magnitude ∼5.3 to 6.5 are possible. Earthquakes and hydrothermal explosions have probably triggered landslides, common features around the lake margins. Few high-resolution seismic reflection surveys have been conducted in lakes in active volcanic areas. Our data reveal active geothermal features with unprecedented resolution and provide important analogues for recognition of comparable features and potential hazards in other subaqueous geothermal environments.

Wyoming↗

USGS2003

Supra-subduction zone extensional magmatism in Vermont and adjacent Quebec: Implications for early Paleozoic Appalachian tectonics

Metadiabasic intrusions of the Mount Norris Intrusive Suite occur in fault-bounded lithotectonic packages containing Stowe, Moretown, and Cram Hill Formation lithologies in the northern Vermont Rowe-Hawley belt, a proposed Ordovician arc-trench gap above an east-dipping subduction zone. Rocks of the Mount Norris Intrusive Suite are characteristically massive and weakly foliated, have chilled margins, contain xenoliths, and have sharp contacts that both crosscut and are parallel to early structural fabrics in the host metasedimentary rocks. Although the mineral assemblage of the Mount Norris Intrusive Suite is albite + actinolite + epidote + chlorite + calcite + quartz, intergrowths of albite + actinolite are probably pseudomorphs after plagioclase + clinopyroxene. The metadiabases are subalkaline, tholeiitic, hypabyssal basalts with preserved ophitic texture. A backarc-basin tectonic setting for the intrusive suite is suggested by its LREE (light rare earth element) enrichment, negative Nb-Ta anomalies, and Ta/Yb vs. Th/Yb trends. Although no direct isotopic age data are available, the intrusions are broadly Ordovician because their contacts are clearly folded by the earliest Acadian (Silurian-Devonian) folds. Field evidence and geochemical data suggest compelling along-strike correlations with the Coburn Hill Volcanics of northern Vermont and the Bolton Igneous Group of southern Quebec. Isotopic and stratigraphic age constraints for the Bolton Igneous Group bracket these backarc magmas to the 477-458 Ma interval. A tectonic model that begins with east-dipping subduction and progresses to outboard west-dipping subduction after a syncollisional polarity reversal best explains the intrusion of deformed metamorphosed metasedimentary rocks by backarc magmas.

Geological Society of America Bulletin↗

USGS2008

Tectonic and magmatic evolution of the northwestern Basin and Range and its transition to unextended volcanic plateaus: Black Rock Range, Nevada

The seismically active eastern and western margins of the northern Basin and Range have been extensively studied, yet the northwestern margin of the province remains incompletely understood. The Black Rock Range of northwestern Nevada straddles the transition from the Basin and Range province to the south and east, and flat-lying volcanic plateaus to the west. This poorly understood range preserves a remarkably complete record of Cenozoic magmatism and provides an important window into the pre-Miocene history of the unextended volcanic plateaus of northeastern California and southern Oregon. Geologic mapping and 40Ar/39Ar geochronology from the northern Black Rock Range document three significant episodes of Eocene to middle Miocene volcanism. Eocene (35 Ma) basalts directly overlie Mesozoic granites and arc-related volcanic and sedimentary rocks. Locally erupted Oligocene to early Miocene (27-21 Ma) bimodal volcanic rocks comprise the bulk of the Cenozoic section and conformably overlie the Eocene basalt flows. These bimodal units include rhyolitic lavas, variably welded rhyolitic ash flows, unwelded ash-fall deposits, and thin basalt flows. In the neighboring Pine Forest Range ???20 km to the north, similar Oligocene to early Miocene units are overlain by more than 500 m of ca. 16.4 Ma Steens-equivalent basalt flows and are capped by ca. 16 Ma rhyolitic ash-flow tuffs. In the northern Black Rock Range, the ca. 16.4 Ma middle Miocene basalts are absent from the section, and a 16.2 Ma rhyolitic ash-flow tuff directly overlies the early Miocene flows. Basaltic and rhyolitic volcanic products in the northern Black Rock Range span 35-16 Ma, with many of the Oligocene volcanic units derived from local vents and dikes. Despite the map-scale complexities of locally derived lava flows, the Cenozoic section is broadly conformable and dips gently (???5??-10??) to the northwest. The region experienced no significant tilting between 35 and 16 Ma, with moderate tilting (???5??-10??) and concomitant uplift occurring after 16 Ma. This tectonic history is consistent with that of the nearby Pine Forest and Santa Rosa Ranges, where low-temperature thermochronology documents footwall exhumation along the range-bounding normal faults after 12 Ma. The velocity structure of the crust beneath the northern Black Rock Range is constrained by a recent geophysical survey (seismic reflection, refraction, and gravity) and contains gradients that correspond to basin depths predicted by our geologic mapping. Together with recently completed geological and geophysical studies from the surrounding region, our results suggest that the evolution of the northwestern margin of the Basin and Range was characterized by long-lived and voluminous volcanism without significant tectonism, followed by low-magnitude (???20%) extension along high-angle normal faults. ?? 2008 Geological Society of America.

Geological Society of America Bulletin↗

USGS2011

Age and tectonic setting of the Mesozoic McCoy Mountains Formation in western Arizona, USA

The McCoy Mountains Formation consists of Upper Jurassic to Upper Cretaceous siltstone, sandstone, and conglomerate exposed in an east-west–trending belt in southwestern Arizona and southeastern California. At least three different tectonic settings have been proposed for McCoy deposition, and multiple tectonic settings are likely over the ∼80 m.y. age range of deposition. U-Pb isotopic analysis of 396 zircon sand grains from at or near the top of McCoy sections in the southern Little Harquahala, Granite Wash, New Water, and southern Plomosa Mountains, all in western Arizona, identified only Jurassic or older zircons. A basaltic lava flow near the top of the section in the New Water Mountains yielded a U-Pb zircon date of 154.4 ± 2.1 Ma. Geochemically similar lava flows and sills in the Granite Wash and southern Plomosa Mountains are inferred to be approximately the same age. We interpret these new analyses to indicate that Mesozoic clastic strata in these areas are Upper Jurassic and are broadly correlative with the lowermost McCoy Mountains Formation in the Dome Rock, McCoy, and Palen Mountains farther west. Six samples of numerous Upper Jurassic basaltic sills and lava flows in the McCoy Mountains Formation in the Granite Wash, New Water, and southern Plomosa Mountains yielded initial ε Nd values (at t = 150 Ma) of between +4 and +6. The geochemistry and geochronology of this igneous suite, and detrital-zircon geochronology of the sandstones, support the interpretation that the lower McCoy Mountains Formation was deposited during rifting within the western extension of the Sabinas-Chihuahua-Bisbee rift belt. Abundant 190–240 Ma zircon sand grains were derived from nearby, unidentified Triassic magmatic-arc rocks in areas that were unaffected by younger Jurassic magmatism. A sandstone from the upper McCoy Mountains Formation in the Dome Rock Mountains (Arizona) yielded numerous 80–108 Ma zircon grains and almost no 190–240 Ma grains, revealing a major reorganization in sediment-dispersal pathways and/or modification of source rocks that had occurred by ca. 80 Ma.

Arizona↗

USGS2026

Mid-Cretaceous porphyritic magmatism in the Beartooth Mountains of the northern Laramide foreland and its connection to Frontier Formation sediment dispersal in Bighorn basin, Montana-Wyoming (USA), and Cordilleran tectonism

Porphyritic intrusions in the southeast Beartooth Mountains and porphyritic cobbles from the Torchlight conglomerate of the Cenomanian Frontier Formation in Bighorn basin (Montana-Wyoming, USA) bear striking resemblance. We utilize geologic mapping, petrography, geochemistry, and geochronology to characterize rocks from both locations and test whether the Beartooth Mountains area was the provenance for Bighorn basin cobbles. Mapping on Line Creek Plateau in the Beartooth Mountains shows three units with porphyritic phenocrysts consisting dominantly of plagioclase, plagioclase + potassium feldspar, and plagioclase + quartz. Petrography shows embayed quartz, opacitic rims, and zoned plagioclase. Geochemistry characterizes the intrusions as trachydacite to trachyte and trace elements exhibit enrichment in light rare earth elements and slight depletion in heavy rare earth elements relative to primitive mantle. Zircon U-Pb dating shows substantial Archean inheritance and ca. 104−92 Ma dates; some samples display multiple mid-Cretaceous date populations. Bighorn basin porphyritic cobbles exhibit similar modal mineralogy, near-identical geochemistry, and Archean inheritance and mid-Cretaceous geochronology. We suggest the porphyritic cobbles were sourced from basement-hosted porphyritic intrusions now exposed in the Beartooth Mountains, given that geochemistry does not agree with coeval volcanic sources along the Frontier Formation depositional fairway (Idaho batholith) or sedimentary-hosted Beartooth Mountains porphyritic sills intruded into Cambrian shale. Stratigraphic evidence does not support kilometer-scale mid-Cretaceous Beartooth Mountains exhumation to expose basement-hosted porphyritic intrusions, and we therefore present a volcanic hypothesis to bring rocks to the surface. This mid-Cretaceous multimillion-year magmatism is unexplained by tectonic models for the north-central Laramide foreland, and thus we further explore the emplacement processes, spatiotemporal significance, and tectonic implications of these rocks.

Montana, Wyoming↗

USGS2005

Subduction erosion of the Jurassic Talkeetna-Bonanza arc and the Mesozoic accretionary tectonics of western North America

The Jurassic Talkeetna volcanic arc of south-central Alaska is an oceanic island arc that formed far from the North American margin. Geochronological, geochemical, and structural data indicate that the arc formed above a north-dipping subduction zone after ca. 201 Ma. Magmatism migrated northward into the region of the Talkeetna Mountains ca. 180 Ma. We interpret this magmatism as the product of removal of the original forearc while the arc was active, mainly by tectonic erosion. Rapid exhumation of the arc after ca. 160 Ma coincided with the sedimentation of the coarse clastic Naknek Formation. This exhumation event is interpreted to reffect collision of the Talkeetna arc with either the active margin of North America or the Wrangellia composite terrane to the north along a second north-dipping subduction zone. The juxtaposition of accreted trench sedimentary rocks (Chugach terrane) against the base of the Talkeetna arc sequence requires a change from a state of tectonic erosion to accretion, probably during the Late Jurassic (before 150 Ma), and definitely before the Early Cretaceous (ca. 125 Ma). The change from erosion to accretion probably reflects increasing sediment flux to the trench due to collision ca. 160 Ma. ?? 2005 Geological Society of America.

Geology↗

USGS2007

Tectonic uplift, threshold hillslopes, and denudation rates in a developing mountain range

Studies across a broad range of drainage basins have established a positive correlation between mean slope gradient and denudation rates. It has been suggested, however, that this relationship breaks down for catchments where slopes are at their threshold angle of stability because, in such cases, denudation is controlled by the rate of tectonic uplift through the rate of channel incision and frequency of slope failure. This mechanism is evaluated for the San Bernardino Mountains, California, a nascent range that incorporates both threshold hill-slopes and remnants of pre-uplift topography. Concentrations of in situ-produced cosmogenic 10Be in alluvial sediments are used to quantify catchment-wide denudation rates and show a broadly linear relationship with mean slope gradient up to ???30??: above this value denudation rates vary substantially for similar mean slope gradients. We propose that this decoupling in the slope gradient-denudation rate relationship marks the emergence of threshold topography and coincides with the transition from transport-limited to detachment-limited denudation. The survival in the San Bernardino Mountains of surfaces formed prior to uplift provides information on the topographic evolution of the range, in particular the transition from slope-gradient-dependent rates of denudation to a regime where denudation rates are controlled by rates of tectonic uplift. This type of transition may represent a general model for the denudational response to orogenic uplift and topographic evolution during the early stages of mountain building. ?? 2007 The Geological Society of America.

Geology↗

USGS2008

Impact effects and regional tectonic insights: Backstripping the Chesapeake Bay impact structure

The Chesapeake Bay impact structure is a ca. 35.4 Ma crater located on the eastern seaboard of North America. Deposition returned to normal shortly after impact, resulting in a unique record of both impact-related and subsequent passive margin sedimentation. We use backstripping to show that the impact strongly affected sedimentation for 7 m.y. through impact-derived crustal-scale tectonics, dominated by the effects of sediment compaction and the introduction and subsequent removal of a negative thermal anomaly instead of the expected positive thermal anomaly. After this, the area was dominated by passive margin thermal subsidence overprinted by periods of regional-scale vertical tectonic events, on the order of tens of meters. Loading due to prograding sediment bodies may have generated these events.

Chesapeake Bay↗

USGS2011

Terrestrial source to deep-sea sink sediment budgets at high and low sea levels: Insights from tectonically active Southern California

Sediment routing from terrestrial source areas to the deep sea influences landscapes and seascapes and supply and filling of sedimentary basins. However, a comprehensive assessment of land-to-deep-sea sediment budgets over millennia with significant climate change is lacking. We provide source to sink sediment budgets using cosmogenic radionuclide–derived terrestrial denudation rates and submarine-fan deposition rates through sea-level fluctuations since oxygen isotope stage 3 (younger than 40 ka) in tectonically active, spatially restricted sediment-routing systems of Southern California. We show that source-area denudation and deep-sea deposition are balanced during a period of generally falling and low sea level (40–13 ka), but that deep-sea deposition exceeds terrestrial denudation during the subsequent period of rising and high sea level (younger than 13 ka). This additional supply of sediment is likely owed to enhanced dispersal of sediment across the shelf caused by seacliff erosion during postglacial shoreline transgression and initiation of submarine mass wasting. During periods of both low and high sea level, land and deep-sea sediment fluxes do not show orders of magnitude imbalances that might be expected in the wake of major sea-level changes. Thus, sediment-routing processes in a globally significant class of small, tectonically active systems might be fundamentally different from those of larger systems that drain entire orogens, in which sediment storage in coastal plains and wide continental shelves can exceed millions of years. Furthermore, in such small systems, depositional changes offshore can reflect onshore changes when viewed over time scales of several thousand years to more than 10 k.y.

California↗

USGS2014

Coseismic landslides reveal near-surface rock strength in a high-relief tectonically active setting

We present quantitative estimates of near-surface rock strength relevant to landscape evolution and landslide hazard assessment for 15 geologic map units of the Longmen Shan, China. Strength estimates are derived from a novel method that inverts earthquake peak ground acceleration models and coseismic landslide inventories to obtain material proper- ties and landslide thickness. Aggregate rock strength is determined by prescribing a friction angle of 30° and solving for effective cohesion. Effective cohesion ranges are from 70 kPa to 107 kPa for 15 geologic map units, and are approximately an order of magnitude less than typical laboratory measurements, probably because laboratory tests on hand-sized specimens do not incorporate the effects of heterogeneity and fracturing that likely control near-surface strength at the hillslope scale. We find that strength among the geologic map units studied varies by less than a factor of two. However, increased weakening of units with proximity to the range front, where precipitation and active fault density are the greatest, suggests that cli- matic and tectonic factors overwhelm lithologic differences in rock strength in this high-relief tectonically active setting.

Geology↗

USGS2016

Extending Alaska's plate boundary: tectonic tremor generated by Yakutat subduction

The tectonics of the eastern end of the Alaska-Aleutian subduction zone are complicated by the inclusion of the Yakutat microplate, which is colliding into and subducting beneath continental North America at near-Pacific-plate rates. The interaction among these plates at depth is not well understood, and further east, even less is known about the plate boundary or the source of Wrangell volcanism. The drop-off in Wadati-Benioff zone (WBZ) seismicity could signal the end of the plate boundary, the start of aseismic subduction, or a tear in the downgoing plate. Further compounding the issue is the possible presence of the Wrangell slab, which is faintly outlined by an anemic, eastward-dipping WBZ beneath the Wrangell volcanoes. In this study, I performed a search for tectonic tremor to map slow, plate-boundary slip in south-central Alaska. I identified ∼11,000 tremor epicenters, which continue 85 km east of the inferred Pacific plate edge marked by WBZ seismicity. The tremor zone coincides with the edges of the downgoing Yakutat terrane, and tremors transition from periodic to continuous behavior as they near the aseismic Wrangell slab. I interpret tremor to mark slow, semicontinuous slip occurring at the interface between the Yakutat and North America plates. The slow slip region lengthens the megathrust interface beyond the WBZ and may provide evidence for a connection between the Yakutat slab and the aseismic Wrangell slab.

Geology↗

USGS2010

Hydrothermal zebra dolomite in the Great Basin, Nevada--attributes and relation to Paleozoic stratigraphy, tectonics, and ore deposits

In other parts of the world, previous workers have shown that sparry dolomite in carbonate rocks may be produced by the generation and movement of hot basinal brines in response to arid paleoclimates and tectonism, and that some of these brines served as the transport medium for metals fixed in Mississippi Valley-type (MVT) and sedimentary exhalative (Sedex) deposits of Zn, Pb, Ag, Au, or barite. Numerous occurrences of hydrothermal zebra dolomite (HZD), comprised of alternating layers of dark replacement and light void-filling sparry or saddle dolomite, are present in Paleozoic platform and slope carbonate rocks on the eastern side of the Great Basin physiographic province. Locally, it is associated with mineral deposits of barite, Ag-Pb-Zn, and Au. In this paper the spatial distribution of HZD occurrences, their stratigraphic position, morphological characteristics, textures and zoning, and chemical and stable isotopic compositions were determined to improve understanding of their age, origin, and relation to dolostone, ore deposits, and the tectonic evolution of the Great Basin. In northern and central Nevada, HZD is coeval and cogenetic with Late Devonian and Early Mississippian Sedex Au, Zn, and barite deposits and may be related to Late Ordovician Sedex barite deposits. In southern Nevada and southwest California, it is cogenetic with small MVT Ag-Pb-Zn deposits in rocks as young as Early Mississippian. Over Paleozoic time, the Great Basin was at equatorial paleolatitudes with episodes of arid paleoclimates. Several occurrences of HZD are crosscut by Mesozoic or Cenozoic intrusions, and some host younger pluton-related polymetallic replacement and Carlin-type gold deposits. The distribution of HZD in space (carbonate platform, margin, and slope) and stratigraphy (Late Neoproterozoic Ediacaran–Mississippian) roughly parallels that of dolostone and both are prevalent in Devonian strata. Stratabound HZD is best developed in Ediacaran and Cambrian units, whereas discordant HZD is proximal to high-angle structures at the carbonate platform margin, such as strike-slip and growth faults and dilational jogs. Fabric-selective replacement and dissolution features (e.g., collapse breccias, voids with geopetal textures) are common, with remaining void space lined with light-colored dolomite crystals that exhibit zoning under cathodoluminescence. Zoned crystals usually contain tiny (<1–3 μm) fluid inclusions with vapor bubbles, requiring Th > ∼70 °C. The oxygen isotopic compositions of HZD are consistent with formation temperatures of 50–150 °C requiring brine circulation to depths of 2–5 km, or more. The few HZD occurrences with the highest concentrations of metals (especially Fe, Mn, and Zn) and the largest isotopic shifts are closely associated with Sedex or MVT deposits known to have formed from hotter brines (e.g., Th > 150–250 °C). These relationships permit that HZD formed at about the same time as dolostone, from brines produced by the evaporation of seawater during arid paleoclimates at equatorial paleolatitudes. Both dolostone and HZD may have formed as basinal brines, which migrated seaward from evaporative pans on the platform, with dolostone forming at low temperatures along shallow migration pathways through permeable limestones, and HZD forming at high temperatures along deeper migration pathways through basal aquifers and dilatant high-angle faults. The small MVT deposits were chemical traps where hot brines encountered rocks or fluids containing reduced sulfur. The abundant Sedex deposits mark sites where hot brine discharged at the seafloor in adjacent basins. Thus the distribution of HZD may map deep migration pathways and upflow zones between eastern shallow marine facies, where evaporative brine could have been generated, and western Sedex deposits, where heated brines discharged along faults into platform margin, slope, and basin facies. The small size and scarcity of Pb-Zn deposits and the abundance of barite deposits in the Great Basin suggests the brines were generally reduced, possibly due to reactions with carbonaceous rocks along deep migration pathways. While this scenario may have occurred at several times, the age and abundance of Sedex deposits suggest that such a hydrology was best developed in the Late Ordovician, Late Devonian, and Early Mississippian, possibly in response to episodes of extension and forebulge faults associated with the Antler orogeny. The improved understanding of HZD may aid future exploration for ore deposits in the Great Basin.

Nevada↗