SEARCH · Geology Reports

Results for “Journal of Agricultural, Biological and Environmental Statistics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 13Linked to original sources

USGS2025

Laboratory assessment for recovery of porcine circovirus 2 and porcine reproductive and respiratory syndrome virus using two types of commercially available hollow-fiber ultrafilters

Groundwater near swine farms is an uninvestigated reservoir for porcine reproductive and respiratory syndrome virus (PRRSV) and porcine circoviruses (PCVs). Enteric microorganisms are often collected from groundwater via dead-end ultrafiltration, but recovery of PRRSV and PCV with this method has not been assessed. We recovered PRRSV2 and PCV2 by dead-end ultrafiltration followed by polyethylene glycol (PEG) precipitation, nucleic acid extraction, and reverse-transcription quantitative real-time PCR. We also compared 2 commercial hemodialysis ultrafilters (Asahi Kasei Rexeed-25A, Nipro Elisio-25H) and compared PRRSV2 recovery in these filters to other waterborne microorganisms. On average, 8 ± 1% of PRRSV2 was recovered by dead-end ultrafiltration and PEG precipitation, compared to 25 ± 6% for adenovirus 41. Full-process recovery of bacteria in the same filters was 5–15%; Cryptosporidium parvum recovery was 42 ± 12%. PCV2 was detected in 4 of 12 replicate filters, but low stock concentrations precluded quantitative recovery estimates. Elisio-25H ultrafilters performed similarly to Rexeed-25A filters for all organisms tested and is an effective replacement for the Rexeed-25A, which is no longer available in the United States. Our recovery of PRRSV2 and PCV2 by dead-end ultrafiltration in the laboratory suggests that PRRSV2 detection limits are as low as 3–50 genomic copies/L in sample volumes of 100–1,500 L. Based on quantitative microbial risk assessment, these concentrations are relevant to PRRSV2 infection rates in the U.S. swine herd.

Journal of Veterinary Diagnostic Investigation↗

USGS2026

Thermal detectability of subsurface water ice on Mars: A comparative analysis for the Subsurface Water Ice Mapping (SWIM) Project

We have developed a new global map of shallow ground ice distribution, SWIM23, based on Mars Global Surveyor Thermal Emission Spectrometer data and made systematic comparisons between this new map and two similar, previously developed data products. We have explored the origin of differences between the three ice maps by detailing technical and procedural differences in their development, by making global pixel-by-pixel comparisons, and by carrying out a series of one-dimensional thermal simulations to explore fundamental physical limitations of thermal ice-detection techniques. These efforts and the production of a composite thermal ice-consistency map supported integration of multiple geophysical data products relevant to ice detection in the upper meter of the Martian regolith into the larger Mars Subsurface Water Ice Mapping project. Our work also highlights fundamental physical limitations to thermal ice detection as a technique, particularly the rapid fall-off in ice detection sensitivity at depths >30 cm, which produces maximum uncertainty in the presence and depth of ice within regions preferred for potential human landing sites. A future Mars orbiter mission designed to detect ice and support crewed landing site selection in the midlatitude region should give payload priority to an instrument capable of probing the 1–5 m depth range (i.e., a high-frequency radar), over a next-generation thermal spectrometer, which is unlikely to offer clarity on ice table depths or lateral continuity of the ice table in the locations of highest interest.

Planetary Science Journal↗

USGS2026

Transcriptional changes in wild Yukon River Chinook Salmon associated with Ichthyophonus infections

Objective We compared differentially expressed genes in Chinook Salmon Oncorhynchus tshawytscha with three divergent Ichthyophonus statuses (undetected, subclinical infections, or clinical disease; n = 100) to investigate associated transcriptomic responses. Disease associated with the fish parasite Ichthyophonus sp. was first diagnosed in adult Chinook Salmon from the Yukon River in the late 1980s and has subsequently been implicated in premature host mortality. Methods Chinook Salmon tissue sample collections and Ichthyophonus infection data were leveraged from a multi-agency collaboration during summer 2022 at three locations along the main-stem Yukon River that spanned nearly 2,000 km of freshwater migration (lower, middle, and upper river). We sequenced the transcriptome and compared this to infection status based on routine diagnostic procedures. Results Among the 17,569 genes for which messenger RNA was detected, we identified a transcription signature in the skeletal muscle that was associated with Ichthyophonus infections and included 53 differentially expressed genes. The differentially expressed genes and their pathways included those known for involvement in immune functions, energy synthesis, cellular breakdown, and reproduction—all processes that are known to be influenced by senescence during spawning migrations. Conclusions Results demonstrate a clear transcriptional difference between diseased fish (clinical disease group) and those in which Ichthyophonus was undetected, including identifying candidate markers for infection in this population. These results provide a foundation for development of nonlethal biomarkers to evaluate potential Ichthyophonus infections in Chinook Salmon based on gene transcription, protein products, or gene variants (e.g., polymorphisms).

Journal of Aquatic Animal Health↗

USGS2025

Multi-lithofacies alluvial characterization via airborne electromagnetic-borehole fusion using ordinary interval kriging and geologic constraints

Airborne electromagnetic (AEM) survey provides extensive spatial coverage and detailed resolution at the near surface and can be used to develop hydrogeological models. However, utilization of AEM data is not straightforward because AEM resistivity is an indirect measurement for inferring sediment types. This study develops an ordinary interval kriging (OIK) algorithm and a resistivity-to-multi-lithofacies (R2ML) data fusion workflow for multi-lithofacies alluvial characterization. OIK utilizes irregular interval data to construct three-dimensional (3D) resistivity fields from one-dimensional inverted AEM resistivity models. The R2ML workflow maps the resistivity field generated from OIK into a multi-facies lithological model, incorporating geologic constraints derived from well logs and geological observations. The numerical and real-world cases demonstrate that OIK is computationally efficient, accounts for 3D anisotropy, and minimizes the smoothing effect, thereby preserving resistivity contrasts and reducing interpolation uncertainty. The methodology is applied to lithologic characterization of the Mississippi River Valley alluvial aquifer (MRVA) in the Shellmound area, Mississippi, U.S. A frequency-domain AEM survey was conducted to support groundwater studies for the managed aquifer recharge (MAR) to the MRVA. The resulting lithological model, including four types of lithofacies—clay, very fine sand, fine-medium sands, and graveliferous sands, illustrates the geomorphological processes of the MRVA and implies potential MAR. The alignment between the lithological model and existing geological and hydrogeological investigations demonstrates that OIK and R2ML workflow effectively capture the subsurface architecture of the MRVA. The methods have broad applicability for characterizing alluvial aquifers through AEM-borehole data fusion, supporting sustainable groundwater management.

Mississippi↗

USGS2024

Subduction zone geometry modulates the megathrust earthquake cycle: Magnitude, recurrence, and variability

Megathrust geometric properties exhibit some of the strongest correlations with maximum earthquake magnitude in global surveys of large subduction zone earthquakes, but the mechanisms through which fault geometry influences subduction earthquake cycle dynamics remain unresolved. Here, we develop 39 models of sequences of earthquakes and aseismic slip (SEAS) on variably-dipping planar and variably-curved nonplanar megathrusts using the volumetric, high-order accurate code tandem to account for fault curvature. We vary the dip, downdip curvature and width of the seismogenic zone to examine how slab geometry mechanically influences megathrust seismic cycles, including the size, variability, and interevent timing of earthquakes. Dip and curvature control characteristic slip styles primarily through their influence on seismogenic zone width: wider seismogenic zones allow shallowly-dipping megathrusts to host larger earthquakes than steeply-dipping ones. Under elevated pore pressure and less strongly velocity-weakening friction, all modeled fault geometries host uniform periodic ruptures. In contrast, shallowly-dipping and sharply-curved megathrusts host multi-period supercycles of slow-to-fast, small-to-large slip events under higher effective stresses and more strongly velocity-weakening friction. We discuss how subduction zones' maximum earthquake magnitudes may be primarily controlled by the dip and dimensions of the seismogenic zone, while second-order effects from structurally-derived mechanical heterogeneity modulate the recurrence frequency and timing of these events. Our results suggest that enhanced co- and interseismic strength and stress variability along the megathrust, such as induced near areas of high or heterogeneous fault curvature, limits how frequently large ruptures occur and may explain curved faults' tendency to host more frequent, smaller earthquakes than flat faults.

Journal of Geophysical Research: Solid Earth↗

USGS2025

Advancing current understanding of Martian impact-generated hydrothermal systems through novel coupled modeling: Insights from Gale, Jezero, and other craters

Impact-generated hydrothermal systems are considered potentially habitable environments on Mars, Earth, and other planetary bodies for microbial life. However, there is an ongoing debate regarding what geological features on Mars provide definitive evidence for such systems. Although earlier studies have modeled hydrothermal processes in Martian craters, they often lacked integration with shock physics hydrocodes to constrain initial impact conditions. The importance of this two-code coupling was demonstrated by successfully replicating alteration signatures in the Earth's Haughton impact structure. In this study, we use a similar two-code approach, combining the iSALE hydrocode with the HYDROTHERM hydrothermal model to simulate the full evolution of impact-generated hydrothermal systems. We apply this method to craters the size of Jezero (∼50 km) and Gale (∼154 km) in diameter. Although Jezero's interior is largely buried, our results align with hypothesized hydrothermal vents and alteration minerals near central uplifts in similarly sized exposed craters, such as Toro and Auki. Furthermore, our models correspond to alteration patterns observed by the Curiosity in the lower layers of Mount Sharp, which may represent remnants of impact-driven hydrothermal activity. A key finding is that these systems may persist much longer than previously estimated. Our simulations suggest that a Jezero-sized system could remain habitable for thermophiles for approximately 720,000 years, whereas a Gale-sized system could persist for nearly 2 million years. Additionally, simulations under unsaturated crustal conditions reveal that air-dominated near-surface layers can suppress vertical fluid flow, enabling deep subsurface alteration without producing detectable mineral signatures at the surface.

Journal of Geophysical Research - Planets↗

USGS2025

Applying U-Th disequilbrium for dating siliceous sinters

Continental hydrothermal systems are critical avenues for the crustal transport of heat and mass captured for geothermal energy and mineral exploration. Thus, understanding their temporal evolution and longevity is important for resource characterization. Deposits of microlaminated siliceous sinter, common surface expressions of high temperature reservoirs (> 170 °C), have the potential to trace hydrothermal histories. Geothermal reservoirs are often located within uranium-bearing silicic volcanic rock where subsurface fluid-rock interactions extract U into hydrothermal fluids. U incorporated in the surface sinter deposit has the potential to provide a U— Th disequilibrium dating option. We focus on samples from El Tatio geyser field in the Altiplano of northern Chile, the largest geothermal system in the Andes. Our resulting 230 Th/U ages, along with the water and deposit elemental compositions, suggest concentrations of U and Th vary predictably along the sinter apron. While distal facies containing the highest U concentrations (> 50 μg/g) are least affected by detrital Th corrections, they can display suspected open-system behavior. In contrast, more medial facies, where bacterial mats and other porous textures are co mmonly concentrated, have only trace amounts of U (< 0.1 μg/g), which leads to unreliable or geologically improbable dates. Proximal facies tend to date most consistently. By comparing existing 14 C ages with 230 Th/U results, 230 Th/U ages tend to be younger than the 14 C ages, supporting the presence of a 14 C-dead carbon influence. New data confirm that the onset of geothermal activity at El Tatio goes back to the late Pleistocene.

Altiplano, El Tatio geyser field↗

USGS2026

Earthquake-hazard exposure of residents with potential access and functional needs in the United States

Earthquake response plans and earthquake early warning (EEW) systems designed for general populations may not consider potential access and functional needs (AFN) of individuals with physical, sensory, cognitive, or social limitations. Previous efforts to map the distribution of these populations have focused on social-vulnerability indices that ignore or oversimply these limitations. The descriptive and exploratory analysis summarized in this United States (U.S.) case study addresses this gap by identifying and integrating spatially explicit data for AFN-related residential populations, earthquake hazards, and county and county equivalents for the conterminous U.S., Alaska, Puerto Rico, and Hawaii. We focus on 13 AFN-related attributes that relate to an individual's ability to access information contained in an EEW alert, to understand and process earthquake information or observed ground shaking, and to take self-protective actions based on this information and physical cues of an earthquake. Depending on the demographic attribute, there are millions to tens of millions of U.S. residents with AFN-related attributes in areas considered to have varying likelihoods (2%, 10%, and 50%) of exceedance of a damaging earthquake in the next 50 years. Although these amounts represent low percentages at the national level, the percentage of individuals with AFN-related attributes in many counties and county equivalents substantially exceeds national percentages. No one county, county equivalent, U.S. state, or U.S. territory has the highest percentage of individuals in all AFN-related attributes; therefore, future efforts to increase individual resilience to earthquakes may benefit from understanding the local context of individuals with potential access and functional needs.

International Journal of Disaster Risk Reduction↗

USGS2026

Geophysical architecture and geochronology of the Neoarchean Mentor anorthosite intrusive complex, northwestern Minnesota: Largest anorthosite complex of the Superior Province?

The Neoarchean Mentor anorthosite intrusive complex (MAIC) lies within the Wawa subprovince in northwestern Minnesota, in a region where the Wawa, Quetico, and Wabigoon subprovinces are juxtaposed in close proximity. Archean rocks are entirely concealed, and interpretations are developed from aeromagnetic, gravity, and borehole samples. The MAIC includes both anorthosite (dense, weakly magnetized) and oxide-rich gabbro (strongly magnetized) lithologies. Anorthosite is coarse-grained to megacrystic, intensely altered, and locally brecciated. Pervasive epidote alteration enhanced the density of the anorthosite via introduction of higher-density mineral assemblages, explaining why the MAIC produces a significant gravity high. Oxide-rich gabbro forms a border phase of the MAIC and has potential for vanadium, chromium, and titanium mineralization, and produces a strong aeromagnetic high. The MAIC is interpreted to extend over an area of 640 km 2 , making it the largest known anorthosite complex of the Superior Province, as measured by preserved areal extent. Modeling indicates the MAIC extends more than 6 km into the subsurface. A new Pb–Pb zircon age of 2737.2 ± 4.5 Ma is interpretated as the crystallization age of anorthosite within the MAIC, showing that the MAIC formed well before the ca. 2690 Ma Shebandowanian orogeny, and raising new questions about correlations with other parts of the Wawa subprovince. A low-density batholith, here informally called the Fertile batholith, is interpreted to intrude the southern part of the MAIC. A new Pb–Pb zircon age of 2701.1 ± 6 Ma is interpreted as the magmatic age of the Fertile batholith.

Minnesota↗

USGS2025

New constraints on location and timing of the Great Lakes tectonic zone, central Upper Peninsula, Michigan, USA

The Great Lakes tectonic zone (GLTZ) forms the boundary between the Wawa–Abitibi and Minnesota River Valley subprovinces within the Archean Superior Province. The GLTZ is concealed for all of its 1100 km length, except for a segment in the central Upper Peninsula of Michigan. There, it is exposed as a northwest-striking mylonite zone along a 11 km segment, extending to the onlap of Paleozoic rocks to the east. Farther east, its location has been unknown. Here, we use aeromagnetic and gravity data to develop interpretations of the expression of the GLTZ and to define its extent under cover. Aeromagnetic gradients over the mylonite zone are interpreted to be produced by structurally juxtaposed rocks with varying magnetizations. Gravity data show a regional gradient along the GLTZ, produced by the juxtaposition of a dense greenstone belt on the north against lower-density gneisses and granites on the south. The GLTZ is interpreted to extend ∼55 km under cover to the east. The GLTZ is terminated on the east by the buried eastern arm of the ca. 1100 Ma Midcontinent Rift. An undeformed granitic dike that cuts the mylonitic foliation produces a U–Pb apatite age of 2523 ± 33 Ma, implying no major post-Archean shearing occurred, and is at odds with previous interpretations of major Proterozoic reactivation. A granite intrusion in the Minnesota River Valley subprovince produces a Pb–Pb zircon age of 2606.9 ± 3.6/7.4 Ma. This suggests that magmatism related to the Sacred Heart orogeny, previously known in Minnesota, extended to Michigan.

Michigan↗

USGS2026

Top-down targeted network analysis of critical mineral commodities applied to international geochemistry database

The global demand for critical mineral commodities is rapidly increasing, making domestic production an important factor in supporting the economy and national security. Large scale, publicly available geochemical databases allow for the application of data informatics methods to interrogate critical mineral commodities data for correlations in deposit formation and distribution, particularly for identifying enrichment of multiple critical mineral commodities at the same deposit. In this study, we applied network analysis to the Critical Minerals Mapping Initiative (CMMI) ore geochemistry (Critical Minerals in Ores, CMiO) database to identify the high concentration (defined as 10× bulk crustal abundance) co-occurrence of different critical mineral commodities across a mineral system hierarchy from deposit environments to individual deposits. Identifying patterns or unique outliers in enrichment in network communities will allow for the location of secondary critical mineral commodity resources from under-utilized deposits. We find trends in the enrichment of critical mineral commodities in network-communities between the elements praseodymium (Pr), neodymium (Nd), terbium (Tb), and dysprosium (Dy) across multiple CMiO database deposit environments and groups down to specific deposit types and sites. A separate trend in network community deposition is observed as well between iridium (Ir) and platinum (Pt) in deposit environments, groups, types, and sites. Network analysis focused on critical minerals in magmatic-hydrothermal deposits identified multiple deposit sites from different deposit types within the CMiO database with concentrations of Dy, Nd, Tb, Pr, Ir, and Pt that are at least ten times greater than the crustal average. This approach can be applied to any target element(s) or deposit(s) of interest, allowing broad investigation of co-enriched critical mineral commodities.

Journal of Geochemical Exploration↗

USGS2024

Exploring the uncertainty of machine learning models and geostatistical mapping of rare earth element potential in Indiana coals, USA

Rare earth elements and yttrium (REEs) have a wide range of applications in high- and low-carbon technologies. The strategic significance of REEs has grown due to their expanding applications in manufacturing industries and the constrained availability of these essential resources. This research explores the applicability of machine learning models and their uncertainty for assessing the REE potential in coal beds using various coal parameters as inputs. The work focuses on developing a predictive model based on geological variables, excluding considerations related to potential shifts in the commodities market. The Indiana Coal Quality Database was used as the data source. The promising and unpromising indicators derived from the outlook coefficient of samples from the database were used as the REE potential indicator for machine learning classification models. The filter-based approach with bootstrap was used to evaluate the importance of the coal parameters and their prediction uncertainties. Four machine learning methods (linear discriminant analysis (LDA), random forest (RF), support vector machine (SVM), and artificial neural networks (ANN), a data balancing and augmentation approach (Synthetic Minority Over-sampling Technique), and bootstrap resampling techniques were used for building the models and evaluating their prediction capabilities under uncertainty. It was determined that the SVM bootstrap model with ten-times balanced and augmented data provided superior results compared with other models. Finally, stochastic spatial maps of the REE potential within the coal basin were generated using sequential indicator simulation. The spatial maps of the REE potential showed that a 29% area of the Indiana section of the Illinois coal basin has economic potential of REEs, with 90% confidence.

Indiana↗

USGS2025

Impact of gas/liquid phase change of CO2 during injection for sequestration

CO 2 sequestration in deep saline formations is an effective and important process to control the rapid rise in CO 2 emissions. The process of injecting CO 2 requires reliable predictions of the stress in the formation and the fluid pressure distributions – particularly since monitoring of the CO 2 migration is difficult – to mitigate leakage, prevent induced seismicity, and analyze wellbore stability. A key aspect of CO 2 is the gas–liquid phase transition at the temperatures and pressures of relevance to leakage and sequestration, which has been recognized as being critical for accurate predictions but has been challenging to model without ad hoc empiricisms. This paper presents a robust multiphase thermodynamics-based poromechanics model to capture the complex phase transition behavior of CO 2 and predict the stress and pressure distribution under super- and sub- critical conditions during the injection process. A finite element implementation of the model is applied to analyze the behavior of a multiphase porous system with CO 2 as it displaces the fluid brine phase. We find that if CO 2 undergoes a phase transition in the geologic reservoir, the spatial variation of the density is significantly affected, and the migration mobility of CO 2 decreases in the reservoir. A key feature of our approach is that we do not a priori assume the location of the CO 2 gas/liquid interface – or even if it occurs at all – but rather, this is a prediction of the model, along with the spatial variation of the phase of CO 2 and the change of the saturation profile due to the phase change.

Journal of the Mechanics and Physics of Solids↗

USGS2024

Long-term communication of aftershock forecasts: The Canterbury earthquake sequence in New Zealand

On 14 February 2016, a magnitude (M)5.7 earthquake struck in Christchurch New Zealand (Aotearoa in the Maori language). The shaking caused damage to historic facades, power outages, cliff collapses, rock falls, and liquefaction but no reported injuries or fatalities. This Valentine’s Day earthquake was an aftershock in the Canterbury earthquake sequence (CES), which began on 4 September 2010 with the M7.1 Darfield Earthquake and included the destructive and fatal M6.2 Christchurch aftershock on 22 February 2011. This study, eight months after the Valentine’s Day earthquake and six years after the initiation of the CES, is the first to explore long-term aftershock forecast information and communication needs. The exploratory study also aimed to gather feedback on aftershock scenarios, an alternative form for communicating the forecast. The qualitative study involved workshops with emergency managers, public health officials, and members of the public in Christchurch. Key findings for long-term communication throughout an earthquake sequence include: 1. divergent earthquake experiences affect aftershock communication response and information needs; 2. understanding aftershock sequence behavior is foundational to sense-making when large aftershocks occur; 3. strategic earthquake sequence updates from the trusted science agency and local agencies could serve as important reminders for earthquake preparedness; 4. communication of aftershock forecast uncertainty could aid with both the credibility of the information and living with uncertainty, and 5. inclusion of impact information and preparedness advice into aftershock forecast scenarios could provide links to actionable information. The paper derives implications for research and practice of long-term communications during an aftershock sequence.

Christchurch↗

USGS2026

Assessing natural recharge in Indian Wells Valley, California: A Basin Characterization Model case study

The communities in Indian Wells Valley (IWV), in the northern Mojave Desert in California, rely on groundwater for domestic and agricultural use. Mountain front recharge from the surrounding Sierra Nevada is the main source of natural recharge to the valley. Increased urbanization, agricultural development, and groundwater pumping during recent decades put IWV in a state of critical overdraft. The U.S. Geological Survey Basin Characterization Model, version 8 (BCMv8) was used to evaluate historical and future climate and hydrologic conditions in IWV. The BCMv8 estimated natural recharge in IWV at 10.7 million cubic meters (Mm 3 ) per year for the period from 1981 to 2010. Future patterns of water balance variables using three future climate scenarios, hot-wet, hot-dry, and warm-moderately wet, were calculated for mid-century (2040–69) and end-of-century (2070–99) periods. Results for both wet models projected an increase in recharge in both periods, whereas the hot-dry model projected a decrease in recharge in both periods. All models reported a large increase in seasonal variability in recharge, indicating more future availability and frequent occurrences of drought years. All climate scenarios projected an increase in climatic water deficit in both periods. These increases in irrigation demand and variability of water supply highlight the importance of strategic management planning for the sustainability of water resources in IWV.

California↗

USGS2024

Remote sensing evapotranspiration in ensemble-based framework to enhance cascade routing and re-infiltration concept in integrated hydrological model applied to support decision making

Integrated hydrological models (IHMs) help characterize the complexity of surface–groundwater interactions. The cascade routing and re-infiltration (CRR) concept, recently applied to a MODFLOW 6 IHM, improved conceptualization and simulation of overland flow processes. The CRR controls the transfer of rejected infiltration and groundwater exfiltration from upslope areas to adjacent downslope areas where that water can be evaporated, re-infiltrated back to subsurface, or discharged to streams as direct runoff. The partitioning between these three components is controlled by uncertain parameters that must be estimated. Thus, by quantifying and reducing those uncertainties, next to uncertainties of the other model parameters (e.g. hydraulic and storage parameters), the reliability of the CRR is improved and the IHM is better suited for decision support modelling, the two key objectives of this work. To this end, the remotely sensed MODIS-ET product was incorporated into the calibration process for complementing traditional hydraulic head and streamflow observations. A total of approximately 150,000 observations guided the calibration of a 13-year MODFLOW 6 IHM simulation of the Sardon catchment (Spain) with daily stress periods. The model input uncertainty was represented by grid-cell-scale parameterization, yielding approximately 500,000 unknown input parameters to be conditioned. The calibration was carried out through an iterative ensemble smoother. Incorporating the MODIS-ET data improved the CRR implementation, and reduced uncertainties associated with other model parameters. Additionally, it significantly reduced the uncertainty associated with net recharge, a critical flux for water management that cannot be directly measured and rather is commonly estimated by IHM simulations.

Sardon catchment↗

USGS2026

Satellite tracking of Galapagos Petrel Pterodroma phaeopygia reveals distribution and movements during chick rearing

We tracked 19 adult Galapagos Petrels Pterodroma phaeopygia during the chick-rearing seasons in 2009 and 2010 (Santa Cruz Island [ n = 16] and Floreana Island [ n = 3]) in the Galápagos Islands, Ecuador. Eight petrels performed 27 complete foraging trips lasting 0.6 to 18.8 days. Short trips (3.2 ± 2.1 days; 785 km; max displacement 671 km) and long trips (10.8 ± 3.9 days; 2,856 km; max displacement 1,034 km) resulted in concentrated use of waters off southern and western Isabela Island and within the Galápagos Marine Reserve (GMR). Less concentrated time extended farther southwest and eastward, in that case toward mainland Ecuador. Total distance covered among all completed trips, independent of duration, was strongly correlated with trip duration ( R ² = 0.92), indicating a strategy favoring active searching and foraging over commuting. Petrels ranged across Ecuador's exclusive economic zone (EEZ), as well as other countries' (Colombia, Costa Rica, Perú), and waters beyond; they spent 46%, 27%, and 34% of their time in the GMR during short, long, and apparent (incomplete) trips, respectively. However, overlap with EEZs or marine protected areas (MPAs) does not necessarily confer protection, because commercial tuna fishing, including legal fishing historically permitted inside the GMR, occurs within these waters. Including all complete and incomplete trips, petrels spent 37% of their time in high-seas waters without formal protection, outside both MPAs and EEZs. While some hot spots overlapped Galápagos MPAs, the far-ranging nature of chick-provisioning petrels underscores the importance for this species of also having coordinated, multinational protection of the high seas.

Floreana Island, Galápagos Islands, Santa Cruz Isl↗

USGS2025

New paleomagnetic constraints on the eruption timing, stratigraphy, and post-emplacement deformation of the Picture Gorge Basalt within the Columbia River Basalt Group

The Picture Gorge Basalt (PGB) is part of the Miocene Columbia River Basalt Group (CRBG). The PGB, which outcrops in eastern Oregon, is considered coincident in time with the voluminous Grande Ronde Basalt. New radiometric ages have expanded the age‐range of the PGB, suggesting it began erupting prior to the Steens Basalt to its south and continued until after cessation of the Grande Ronde Basalt eruptions, an interval of 1.5 Ma. However, the existing paleomagnetism of the PGB implies this eruption timeline is an overestimate. To reconcile the radiometric and paleomagnetic timescales for the PGB, we conducted a paleomagnetic study on sections of the PGB to construct a detailed, high‐quality magnetostratigraphy. Our data indicate the stratigraphically lowest lava flows in the PGB are of reversed polarity, revealing a new paleomagnetic transition with the PGB and a reversed (R)–normal (N)–reversed (R) sequence. This suggests one of two timeline possibilities for PGB volcanism: (a) eruptions began and during through CRBG polarity chrons R0–N0–R1, penecontemporaneous with Steens Basalt, or (b) eruptions began and persisted during CRBG polarity chrons R1–N1–R2. Our work supports a longer interval of PGB volcanism than was suggested by previous paleomagnetic data but is at odds with the suggestion that PGB eruptions lasted through the entire main CRBG. We favor a scenario wherein PGB eruptions begin with R0 and continue into the R1 paleomagnetic interval. The paleomagnetic results also record a ∼18° vertical‐axis rotation of east‐central Oregon after ∼16 Ma with respect to stable North America.

Oregon↗