Geology ReportsSearch

SEARCH · Geology Reports

Results for “International Journal of Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources

Metabolically diverse microorganisms mediate methylmercury formation under nitrate-reducing conditions in a dynamic hydroelectric reservoir

Brownlee Reservoir is a mercury (Hg)-impaired hydroelectric reservoir that exhibits dynamic hydrological and geochemical conditions and is located within the Hells Canyon Complex in Idaho, USA. Methylmercury (MeHg) contamination in fish is a concern in the reservoir. While MeHg production has historically been attributed to sulfate-reducing bacteria and methanogenic archaea, microorganisms carrying the hgcA gene are taxonomically and metabolically diverse and the major biogeochemical cycles driving mercury (Hg) methylation are not well understood. In this study, Hg speciation and redox-active compounds were measured throughout Brownlee Reservoir across the stratified period in four consecutive years (2016–2019) to identify the location where and redox conditions under which MeHg is produced. Metagenomic sequencing was performed on a subset of samples to characterize the microbial community with hgcA and identify possible links between biogeochemical cycles and MeHg production. Biogeochemical profiles suggested in situ water column Hg methylation was the major source of MeHg. These profiles, combined with genome-resolved metagenomics focused on hgcA -carrying microbes, indicated that MeHg production occurs in this system under nitrate- or manganese-reducing conditions, which were previously thought to preclude Hg-methylation. Using this multidisciplinary approach, we identified the cascading effects of interannual variability in hydrology on the redox status, microbial metabolic strategies, abundance and metabolic diversity of Hg methylators, and ultimately MeHg concentrations throughout the reservoir. This work expands the known conditions conducive to producing MeHg and suggests that the Hg-methylation mitigation efforts by nitrate or manganese amendment may be unsuccessful in some locations.

Idaho

Influence of an igneous intrusion on the inorganic geochemistry of a bituminous coal from Pitkin County, Colorado

Although the effects of igneous dikes on the organic matter in coal have been observed at many localities there is virtually no information on the effects of the intrusions of the inorganic constituents in the coal. Such a study may help to elucidate the behavior of trace elements during in situ gasification of coal and may provide insights into the resources potential for coal and coke affected by the intrusion. To determine the effects of an igneous intrusion on the inorganic chemistry of a coal we used a series of 11 samples of coal and natural coke that had been collected at intervals from 3 to 106 cm from a dike that intruded the bituminous Dutch Creek coal in Pitkin, CO. The samples were chemically analyzed for 66 elements. SEM-EDX and X-ray diffraction analysis were performed on selected samples. Volatile elements such as F, Cl, Hg, and Se are not depleted in the samples (coke and coal) nearest the dike that were exposed to the highest temperatures. Their presence in these samples is likely due to secondary enrichment following volatilization of the elements inherent in the coal. Equilibration with ground water may account for the uniform distribution of Na, B, and Cl. High concentrations of Ca, Mg, Fe, Mn, Sr, and CO2 in the coke region are attributed to the reaction of CO and CO2 generated during the coking of the coal with fluids from the intrusion, resulting in the precipitation of carbonates. Similarly, precipitation of sulfide minerals in the coke zone may account for the relatively high concentrations of Ag, Hg, Cu, Zn, and Fe. Most elements are concentrated at the juncture of the fluidized coke and the thermally metamorphosed coal. Many of the elements enriched in this region (for example, Ga, Ge, Mo, Rb, U, La, Ce, Al, K, and Si) may have been adsorbed on either the clays or the organic matter or on both.Although the effects of igneous dikes on the organic matter in coal have been observed at many localities there is virtually no information on the effects of the intrusions on the inorganic constituents in the coal. Such a study may help to elucidate the behavior of trace elements during in situ gasification of coal and may provide insights into the resource potential of coal and coke affected by the intrusion. To determine the effects of an igneous intrusion on the inorganic chemistry of a coal we used a series of 11 samples of coal and natural coke that had been collected at intervals from 3 to 106 cm from a dike that intruded the bituminous Dutch Creek coal in Pitkin, CO. The samples were chemically analyzed for 66 elements. SEM-EDX and X-ray diffraction analysis were performed on selected samples. Volatile elements such as F, Cl, Hg, and Se are not depleted in the samples (coke and coal) nearest the dike that were exposed to the highest temperatures. Their presence in these samples is likely due to secondary enrichment following volatilization of the elements inherent in the coal. Equilibration with ground water may account for the uniform distribution of Na, B, and Cl. High concentrations of Ca, Mg, Fe, Mn, Sr, and CO2 in the coke region are attributed to the reaction of CO and CO2 generated during the coking of the coal with fluids from the intrusion, resulting in the precipitation of carbonates. Similarly, precipitation of sulfide minerals in the coke zone may account for the relatively high concentrations of Ag, Hg, Cu, Zn, and Fe. Most elements are concentrated at the juncture of the fluidized coke and the thermally metamorphosed coal. Many of the elements enriched in this region (for example, Ga, Ge, Mo, Rb, U, La, Ce, Al, K, and Si) may have been adsorbed on either the clays or the organic matter or on both.

International Journal of Coal Geology

Oxygen isotope fractionation in divalent metal carbonates

Equilibrium fractionation factors for the distribution of 18 O between alkaline‐earth carbonates and water have been measured over the temperature range 0–500°C. The fractionation factors α"> α α can be represented by the equations CaCO3–H2O, 1000lnα = 2.78(106T−2)− 3.39,"> CaCO 3 – H 2 O , 1000 ln α = 2.78(10 6 T −2 )− 3.39, CaCO3–H2O, 1000lnα = 2.78(106T−2)− 3.39, SrCO3–H2O, 1000lnα = 2.69(106T−2)− 3.74,"> SrCO 3 – H 2 O , 1000 ln α = 2.69(10 6 T −2 )− 3.74, SrCO3–H2O, 1000lnα = 2.69(106T−2)− 3.74, BaCO3–H2O, 1000lnα = 2.57(106T−2)− 4.73."> BaCO 3 – H 2 O , 1000 ln α = 2.57(10 6 T −2 )− 4.73. BaCO3–H2O, 1000lnα = 2.57(106T−2)− 4.73. Measurements on MnCO 3 , CdCO 3 , and PbCO 3 were made at isolated temperatures. A statistical‐mechanical calculation of the isotopic partition function ratios gives reasonably good agreement with experiment. Both cationic size and mass are important in isotopic fractionation, the former predominantly in its effect on the internal vibrations of the anion, the latter in its effect on the lattice vibrations.

Journal of Chemical Physics

Biogenic origin of coalbed gas in the northern Gulf of Mexico Coastal Plain, U.S.A

New coal-gas exploration and production in northern Louisiana and south-central Mississippi, Gulf of Mexico Basin, is focused on the Wilcox Group (Paleocene–Eocene), where the depth to targeted subbituminous C to high volatile C bituminous coal beds ranges from 300 to 1680 m, and individual coal beds have a maximum thickness of about 6 m. Total gas content (generally excluding residual gas) of the coal beds ranges from less than 0.37 cm 3 /g (as-analyzed or raw basis; 1.2 cm 3 /g, dry, ash free basis, daf) at depths less than 400 m, to greater than 7.3 cm 3 /g (as-analyzed basis; 8.76 cm 3 /g, daf) in deeper (> 1,500 m) parts of the basin. About 20 Wilcox coal-gas wells in northern Louisiana produce from 200 to 6485 m 3 of gas/day and cumulative gas production from these wells is approximately 25 million m 3 (as of December, 2006). U.S. Geological Survey assessment of undiscovered, technically recoverable gas resources in the Gulf of Mexico Coastal Plain, including northern and south-central Mississippi, indicates that coal beds of the Wilcox Group contain an estimated mean total 109.3 million m 3 (3.86 trillion ft 3 ) of producible natural gas. To determine the origin of the Wilcox Group coal gases in northern Louisiana, samples of gas, water, and oil were collected from Wilcox coal and sandstone reservoirs and from under- and overlying Late Cretaceous and Eocene carbonate and sandstone reservoirs. Isotopic data from Wilcox coal-gas samples have an average δ 13 C CH4 value of − 62.6‰ VPDB (relative to Vienna Peedee Belemnite) and an average δ D CH4 value of − 199.9‰ VSMOW (relative to Vienna Standard Mean Ocean Water). Values of δ 13 C CO2 range from − 25.4 to 3.42‰ VPDB. Produced Wilcox saline water collected from oil, conventional gas, and coalbed gas wells have δ D H2O values that range from − 27.3 to − 18.0‰ VSMOW. These data suggest that the coal gases primarily are generated in saline formation water by bacterial reduction of CO 2 . Shallow (< 150 m) Wilcox coal beds containing freshwater have little or no biogenic gas. Molecular and isotopic analyses of gas samples collected from conventional gas and oil wells suggests that both biogenic and thermogenic gases are present in and adjacent to the Wilcox intervals that contain biogenic coal gases. Oil, probably sourced from thermally mature, down-structural-dip parts of the Wilcox Group, is produced from sandstones within the coal-bearing interval. Gas chromatograms of C 10+ saturated hydrocarbons from Wilcox oils show a depletion of n -alkanes probably resulting from biodegradation of the oil. Isotopic composition of the gases associated with the oils is of mixed themogenic and biogenic origin (average δ 13 C CH4 = − 44.4‰ VPDB, and average δ D CH4 = − 182.4‰ VSMOW).

International Journal of Coal Geology

Field calibration and validation of remote-sensing surveys

The Optical Collection Suite (OCS) is a ground-truth sampling system designed to perform in situ measurements that help calibrate and validate optical remote-sensing and swath-sonar surveys for mapping and monitoring coastal ecosystems and ocean planning. The OCS system enables researchers to collect underwater imagery with real-time feedback, measure the spectral response, and quantify the water clarity with simple and relatively inexpensive instruments that can be hand-deployed from a small vessel. This article reviews the design and performance of the system, based on operational and logistical considerations, as well as the data requirements to support a number of coastal science and management projects. The OCS system has been operational since 2009 and has been used in several ground-truth missions that overlapped with airborne lidar bathymetry (ALB), hyperspectral imagery (HSI), and swath-sonar bathymetric surveys in the Gulf of Maine, southwest Alaska, and the US Virgin Islands (USVI). Research projects that have used the system include a comparison of backscatter intensity derived from acoustic (multibeam/interferometric sonars) versus active optical (ALB) sensors, ALB bottom detection, and seafloor characterization using HSI and ALB.

Alaska

Depth calibration and validation of the Experimental Advanced Airborne Research Lidar, EAARL-B

The original National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), was extensively modified to increase the spatial sampling density and improve performance in water ranging from 3–44 m. The new (EAARL-B) sensor features a 300% increase in spatial density, which was achieved by optically splitting each laser pulse into 3 pulses spatially separated by 1.6 m along the flight track and 2.0 m across-track on the water surface when flown at a nominal altitude of 300 m. Improved depth capability was achieved by increasing the total peak laser power by a factor of 10, and incorporating a new “deep-water” receiver, optimized to exclusively receive refracted and scattered light from deeper water (15–44 m). Two clear-water missions were conducted to determine the EAARL-B depth calibration coefficients. The calibration mission was conducted over the U.S. Navy’s South Florida Testing Facility (SFTF), an established lidar calibration range located in the coastal waters southeast of Fort Lauderdale, Florida. A second mission was conducted over Lang Bank, St. Croix, U.S. Virgin Islands. The EAARL-B survey was spatially and temporally coincident with multibeam sonar surveys conducted by the National Oceanic and Atmospheric Administration (NOAA) ship Nancy Foster. The NOAA depth data range from 10–100 m, whereas the EAARL-B captured data from 0–41 m. Coefficients derived from the SFTF calibration mission were used to correct the EAARL-B data from both missions. The resulting calibrated EAARL-B data were then compared with the original reference dataset, a jet-ski-based single beam sonar dataset from the SFTF site, and the deeper NOAA data from St. Croix. Additionally, EAARL-B depth accuracy was evaluated by comparing the depth results to International Hydrographic Organization (IHO) standards. Results show good agreement between the calibrated EAARL-B data and all three reference datasets, with 95% confidence levels well within the maximum allowable total vertical uncertainty for IHO Order 1 surveys.

Journal of Coastal Research

Observations of turbulence in a partially stratified estuary

The authors present a field study of estuarine turbulence in which profiles of Reynolds stresses were directly measured using an ADCP throughout a 25-h tidal day. The dataset that is discussed quantifies turbulent mixing for a water column in northern San Francisco Bay that experiences a sequence of states that includes a weak ebb and flood that are stratified, followed by a strong, and eventually unstratified, ebb and flood. These measurements show that energetic turbulence is confined to a bottom mixed layer by the overlying stratification. Examination of individual Reynolds stress profiles along with profiles of Richardson number and turbulent Froude number shows that the water column can be divided into regions based on the relative importance of buoyancy effects. Using the measured turbulence production rate P, the dissipation rate ϵ is estimated. The observed turbulence had values of ϵ / νN 2 > 20 all of the time and ϵ / νN 2 > 200 most of the time, suggesting that the observed motions were buoyancy affected turbulence rather than internal waves. However, at times, turbulent Froude numbers in much of the upper-water column were less than one, indicating important stratification effects. Taken as a whole, the data show that stratification affects the turbulent velocity variance q 2 most severely; that is, observed reductions in are largely associated with small values of q 2 rather than with a dramatic reduction in the efficiency with which turbulent motions produce momentum fluxes. Finally, the dataset is compared to predictions made using the popular Mellor–Yamada level 2.5 closure. These comparisons show that the model tends to underestimate the turbulent kinetic energy in regions of strong stratification where the turbulence is strongly inhomogeneous and to overestimate the turbulent kinetic energy in weakly stratified regions. The length scale does not appear to compensate for these errors, and, as a result, similar errors are seen in the eddy viscosity predictions. It is hypothesized that the underestimation of q 2 is due to an inaccurate parameterization of turbulence self-transport from the near-bed region to the overlying stratification.

Journal of Physical Oceanography

Design and performance of a horizontal mooring for upper-ocean research

This paper describes the design and performance of a two-dimensional moored array for sampling horizontal variability in the upper ocean. The mooring was deployed in Massachusetts Bay in a water depth of 84 m for the purpose of measuring the horizontal structure of internal waves. The mooring was instrumented with three acoustic current meters (ACMs) spaced along a 170-m horizontal cable that was stretched between two subsurface buoys 20 m below the sea surface. Five 25-m-long vertical instrument strings were suspended from the horizontal cable. A bottom-mounted acoustic Doppler current profiler (ADCP) was deployed nearby to measure the current velocity throughout the water column. Pressure sensors mounted on the subsurface buoys and the vertical instrument strings were used to measure the vertical displacements of the array in response to the currents. Measurements from the ACMs and the ADCP were used to construct time-dependent, two-dimensional current fields. The current fields were used as input to a numerical model that calculated the deformation of the array with respect to the nominal zero-current configuration. Comparison of the calculated vertical offsets of the downstream subsurface buoy and downstream vertical instrument string with the pressure measurements were used to verify the numerical code. These results were then used to estimate total deformation of the array due to the passage of the internal waves. Based on the analysis of the three internal wave events with the highest measured vertical offsets, it is concluded that the geometry of the main structure (horizontal cable and anchor legs) was kept to within ±2.0 m, and the geometry of the vertical instrument strings was kept to within ±4.0 m except for one instance when the current velocity reached 0.88 m s −1 .

Massachusetts

Evaluation of coal mine drainage and associated precipitates for radium and rare earth element concentrations

Coal mine drainage (CMD) and associated metal-rich precipitates have recently been proposed as unconventional sources of rare earth elements (REEs). However, the potential occurrence of radium (Ra), a known carcinogen, with the REE-bearing phases has not been investigated. We hypothesized that Ra may occur in solids that are precipitated from CMD as a “radiobarite” solid solution ((Ba,Sr,Ra)SO 4 ) and/or adsorbed with hydrous metal oxides. REEs have been documented to sorb or co-precipitate with iron (Fe), manganese (Mn), and aluminum (Al) oxyhydroxide in CMD solids. Likewise, Ra has been documented to sorb to hydrous Fe and Mn oxides especially where sulfate (SO 4 ) and/or barium (Ba) concentrations are insufficient to precipitate radiobarite. Thus, we conducted the first-ever survey of Ra concentrations in corresponding CMD water and solid samples in the United States. Samples were analyzed from 4 untreated and 9 treated CMD sites in both the bituminous and anthracite coal regions of Pennsylvania across a range of pH and SO 4 concentrations. The dissolved Ra in CMD was relatively low (<0.5 Bq/L), consistent with radiobarite solubility; however, CMD solids were largely composed of amorphous Fe, Al, and Mn oxyhydroxide and silicate minerals. Ra was associated with Mn-enriched CMD solids, upwards of 875 Bq/kg. Total REE + yttrium (Y) content in the CMD solids was enriched upwards of 3600 mg/kg and was significantly correlated with Al content. These preliminary results suggest that REE extraction may target Al-rich solids to avoid Ra in Mn-rich solids.

Pennsylvania

A model to locate potential areas for lake sturgeon spawning habitat construction in the St. Clair–Detroit River System

In response to a need for objective scientific information that could be used to help remediate loss of fish spawning habitat in the St. Clair River and Detroit River International Areas of Concern, this paper summarizes a large-scale geographic mapping investigation. Our study integrates data on two variables that many riverine fishes respond to in selecting where to spawn in these waters (water flow velocity and water depth) with available maps of the St. Clair&ndash;Detroit River System (SC&ndash;DRS). Our objectives were to locate and map these two physical components of fish habitat in the St. Clair and Detroit rivers and Lake St. Clair using a geographic information system (GIS) and to identify where, theoretically, fish spawning habitat could be remediated in these rivers. The target fish species to which this model applies is lake sturgeon (Acipenser fulvescens), but spawning reefs constructed for lake sturgeon in this system have been used for spawning by 17 species of fish. Our analysis revealed areas in each river that possessed suitable water velocity and depth for fish spawning and therefore could theoretically be remediated by the addition of rock-rubble substrate like that used at two previously remediated sites in the Detroit River at Belle Isle and Fighting Island. Results of our analysis revealed that only 3% of the total area of the SC&ndash;DRS possesses the necessary combination of water depth and high flow velocity to be indicated by the model as potential spawning habitat for lake sturgeon.

Michigan, Ontario

Structural equation model of total phosphorus loads in the Red River of the North Basin, USA and Canada

Attribution of the causes of trends in nutrient loading is often limited to correlation, qualitative reasoning, or references to the work of others. This paper represents efforts to improve causal attribution of water-quality changes. The Red River of the North basin provides a regional test case because of international interest in the reduction of total phosphorus loads and the availability of long-term total phosphorus data and ancillary geospatial data with the potential to explain changes in water quality over time. The objectives of the study are to investigate structural equation modeling methods for application to water-quality problems and to test causal hypotheses related to the drivers of total phosphorus loads over the period 1970 to 2012. Multiple working hypotheses that explain total phosphorus loads and methods for estimating missing ancillary data were developed, and water-quality related challenges to structural equation modeling (including skewed data and scaling issues) were addressed. The model indicates that increased precipitation in season 1 (November–February) or season 2 (March–June) would increase total phosphorus loads in the basin. The effect of agricultural practices on total phosphorus loads was significant, although the effect is about one-third of the effect of season 1 precipitation. The structural equation model representing loads at six sites in the basin shows that climate and agricultural practices explain almost 60% of the annual total phosphorus load in the Red River of the North basin. The modeling process and the unexplained variance highlight the need for better ancillary long-term data for causal assessments.

Red River of the North Basin

Hydrologic connectivity to streams increases nitrogen and phosphorus inputs and cycling in soils of created and natural floodplain wetlands

Greater connectivity to stream surface water may result in greater inputs of allochthonous nutrients that could stimulate internal nitrogen (N) and phosphorus (P) cycling in natural, restored, and created riparian wetlands. This study investigated the effects of hydrologic connectivity to stream water on soil nutrient fluxes in plots (n = 20) located among four created and two natural freshwater wetlands of varying hydrology in the Piedmont physiographic province of Virginia. Surface water was slightly deeper; hydrologic inputs of sediment, sediment-N, and ammonium were greater; and soil net ammonification, N mineralization, and N turnover were greater in plots with stream water classified as their primary water source compared with plots with precipitation or groundwater as their primary water source. Soil water-filled pore space, inputs of nitrate, and soil net nitrification, P mineralization, and denitrification enzyme activity (DEA) were similar among plots. Soil ammonification, N mineralization, and N turnover rates increased with the loading rate of ammonium to the soil surface. Phosphorus mineralization and ammonification also increased with sedimentation and sediment-N loading rate. Nitrification flux and DEA were positively associated in these wetlands. In conclusion, hydrologic connectivity to stream water increased allochthonous inputs that stimulated soil N and P cycling and that likely led to greater retention of sediment and nutrients in created and natural wetlands. Our findings suggest that wetland creation and restoration projects should be designed to allow connectivity with stream water if the goal is to optimize the function of water quality improvement in a watershed.

Journal of Environmental Quality

Irrigated areas of India derived using MODIS 500 m time series for the years 2001-2003

The overarching goal of this research was to develop methods and protocols for mapping irrigated areas using a Moderate Resolution Imaging Spectroradiometer (MODIS) 500 m time series, to generate irrigated area statistics, and to compare these with ground- and census-based statistics. The primary mega-file data-cube (MFDC), comparable to a hyper-spectral data cube, used in this study consisted of 952 bands of data in a single file that were derived from MODIS 500 m, 7-band reflectance data acquired every 8-days during 2001-2003. The methods consisted of (a) segmenting the 952-band MFDC based not only on elevation-precipitation-temperature zones but on major and minor irrigated command area boundaries obtained from India's Central Board of Irrigation and Power (CBIP), (b) developing a large ideal spectral data bank (ISDB) of irrigated areas for India, (c) adopting quantitative spectral matching techniques (SMTs) such as the spectral correlation similarity (SCS) R 2 -value, (d) establishing a comprehensive set of protocols for class identification and labeling, and (e) comparing the results with the National Census data of India and field-plot data gathered during this project for determining accuracies, uncertainties and errors. The study produced irrigated area maps and statistics of India at the national and the subnational (e.g., state, district) levels based on MODIS data from 2001-2003. The Total Area Available for Irrigation (TAAI) and Annualized Irrigated Areas (AIAs) were 113 and 147 million hectares (MHa), respectively. The TAAI does not consider the intensity of irrigation, and its nearest equivalent is the net irrigated areas in the Indian National Statistics. The AIA considers intensity of irrigation and is the equivalent of "irrigated potential utilized (IPU)" reported by India's Ministry of Water Resources (MoWR). The field-plot data collected during this project showed that the accuracy of TAAI classes was 88% with a 12% error of omission and 32% of error of commission. Comparisons between the AIA and IPU produced an R 2 -value of 0.84. However, AIA was consistently higher than IPU. The causes for differences were both in traditional approaches and remote sensing. The causes of uncertainties unique to traditional approaches were (a) inadequate accounting of minor irrigation (groundwater, small reservoirs and tanks), (b) unwillingness to share irrigated area statistics by the individual Indian states because of their stakes, (c) absence of comprehensive statistical analyses of reported data, and (d) subjectivity involved in observation-based data collection process. The causes of uncertainties unique to remote sensing approaches were (a) irrigated area fraction estimate and related sub-pixel area computations and (b) resolution of the imagery. The causes of uncertainties common in both traditional and remote sensing approaches were definitions and methodological issues. ?? 2009 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS).

ISPRS Journal of Photogrammetry and Remote Sensing

A mycosis-like granuloma of fish

Mycoses of systemic distribution are rarely observed in fresh-water fish in this country. In a recent review of atypical cell growths in fishes, Nigrelli cited the only known instance of a mycetoma in a North American fresh-water fish which occurred in the head of fingerling landlocked salmon from an Idaho hatchery. The fungus associated with this granuloma was characterized by a branching septate mycelium. Rucker reported a streptomycete which was pathogenic to blueblack salmon. This organism produced internal nodules containing masses of hyphae but no inflammatory response. A pathogenic fungus has been observed frequently in marine fish, however, and in both marine and fresh-water fish in Europe. This organism was tentatively classified as a Phycomycete in or near the order Chytridiales and was assigned to the genus and species Ichthyophonus hoferi , later reclassified as Ichthyosporidium hoferi . The graduloma described in this report occurs in fresh-water trout and is apparently caused by a budding, yeast-like form with no hyphae which evokes a tremendous inflammatory reaction. Morphologically, the organism does not resemble the previously described Ichthyosporidium. The lesions were first seen accidentally in sections prepared from a diplobacillus infection of brook trout termed &ldquo;kidney disease.&rdquo; Subsequently, the granuloma was observed in three widely separated infections involving the diplobacillus in each instance. The histological material was received in a fixed condition; thus, no cultural data was available and the nomenclature and classification of the mycotic organism were not attempted. The present distribution of the disease, however, with its potential threat to domestic fish populations, seemed to warrant a description and discussion of the disease. Efforts are in progress to culture the organism.

Journal of Infectious Diseases

Depositional controls on coal distribution and quality in the Eocene Brunner Coal Measures, Buller Coalfield, South Island, New Zealand

The Buller Coalfield on the West Coast of the South Island, New Zealand, contains the Eocene Brunner Coal Measures. The coal measures unconformably overlie Paleozoic-Cretaceous basement rocks and are conformably overlain by, and laterally interfinger with, the Eocene marine Kaiata Formation. This study examines the lithofacies frameworks of the coal measures in order to interpret their depositional environments. The lower part of the coal measures is dominated by conglomeratic lithofacies that rest on a basal erosional surface and thicken in paleovalleys incised into an undulating peneplain surface. These lithofacies are overlain by sandstone, mudstone and organic-rich lithofacies of the upper part of the coal measures. The main coal seam of the organic-rich lithofacies is thick (10-20 m), extensive, locally split, and locally absent. This seam and associated coal seams in the Buller Coalfield are of low- to high-volatile bituminous rank (vitrinite reflectance between 0.65% and 1.75%). The main seam contains a variable percentage of ash and sulphur. These values are related to the thickening and areal distribution of the seam, which in turn, were controlled by the nature of clastic deposition and peat-forming mire systems, marine transgression and local tidal incursion. The conglomeratic lithofacies represent deposits of trunk and tributary braided streams that rapidly aggraded incised paleovalleys during sea-level stillstands. The main seam represents a deposit of raised mires that initially developed as topogenous mires on abandoned margins of inactive braidbelts. Peat accumulated in mires as a response to a rise in the water table, probably initially due to gradual sea-level rise and climate, and the resulting raised topography served as protection from floods. The upper part of the coal measures consists of sandstone lithofacies of flu vial origin and bioturbated sandstone, mudstone and organic-rich lithofacies, which represent deposits of paralic (deltaic, barrier shoreface, tidal and mire) and marine environments. The fluvial sandstone lithofacies accumulated in channels during a sea-level stillstand. The channels were infilled by coeval braided and meandering streams prior to transgression. Continued transgression, ranging from tidal channel-estuarine incursions to widespread but uneven paleoshoreline encroachment, accompanied by moderate basin subsidence, is marked by a stacked, back-stepping geometry of bioturbated sandstone and marine mudstone lithofacies. Final retrogradation (sea-level highstand) is marked by backfilling of estuaries and by rapid landward deposition of the marine Kaiata Formation in the late Eocene.

International Journal of Coal Geology

Rethinking a groundwater flow system using a multiple-tracer geochemical approach: A case study in Moab-Spanish Valley, Utah

The Glen Canyon Group Aquifer (GCGA) is the sole source of public water supply for the city of Moab, Utah, a domestic and international tourist destination. Population and tourism growth are likely to target the GCGA for future water resources, but our analysis indicates that additional withdrawals would likely be sourced from groundwater storage and not be sustained by recharge. A quantitative estimate of groundwater discharge from the GCGA is problematic because the downgradient aquifer boundary is the Colorado River, and groundwater discharge to the river is very small compared to the river flow. A water budget based on a conceptual model of GCGA discharging into an adjacent alluvial Valley-Fill Aquifer (VFA) was reported by Sumsion (1971) and numerous subsequent studies have repeated and utilized this water budget. The GCGA contains stable isotopes, tritium, 3 He/ 4 He ratios, dissolved solids, and sulfate concentrations that contrast with the VFA, indicating it is instead recharged by local streams rather than from the GCGA. Water-budget calculations, based on: (1) measured spring discharge and streamflow gains, (2) horizontal gradients in VFA groundwater age, and (3) GCGA outcrop area vadose-zone pore waters are all less than previously thought. Using a lumped parameter model and 14 C groundwater ages, we estimate recharge to the deeper GCGA (DGCGA) to be 4.2 ± 2.3 × 10 6 m 3 /yr, which is approximately equal to the measured discharge from wells and springs.

Utah

A linear geospatial streamflow modeling system for data sparse environments

In many river basins around the world, inaccessibility of flow data is a major obstacle to water resource studies and operational monitoring. This paper describes a geospatial streamflow modeling system which is parameterized with global terrain, soils and land cover data and run operationally with satellite‐derived precipitation and evapotranspiration datasets. Simple linear methods transfer water through the subsurface, overland and river flow phases, and the resulting flows are expressed in terms of standard deviations from mean annual flow. In sample applications, the modeling system was used to simulate flow variations in the Congo, Niger, Nile, Zambezi, Orange and Lake Chad basins between 1998 and 2005, and the resulting flows were compared with mean monthly values from the open‐access Global River Discharge Database. While the uncalibrated model cannot predict the absolute magnitude of flow, it can quantify flow anomalies in terms of relative departures from mean flow. Most of the severe flood events identified in the flow anomalies were independently verified by the Dartmouth Flood Observatory (DFO) and the Emergency Disaster Database (EM‐DAT). Despite its limitations, the modeling system is valuable for rapid characterization of the relative magnitude of flood hazards and seasonal flow changes in data sparse settings.

International Journal of River Basin Management

Does Europa have a subsurface ocean? Evaluation of the geological evidence

It has been proposed that Jupiter's satellite Europa currently possesses a global subsurface ocean of liquid water. Galileo gravity data verify that the satellite is differentiated into an outer H 2 O layer about 100 km thick but cannot determine the current physical state of this layer (liquid or solid). Here we summarize the geological evidence regarding an extant subsurface ocean, concentrating on Galileo imaging data. We describe and assess nine pertinent lines of geological evidence: impact morphologies, lenticulae, cryovolcanic features, pull‐apart bands, chaos, ridges, surface frosts, topography, and global tectonics. An internal ocean would be a simple and comprehensive explanation for a broad range of observations; however, we cannot rule out the possibility that all of the surface morphologies could be due to processes in warm, soft ice with only localized or partial melting. Two different models of impact flux imply very different surface ages for Europa; the model favored here indicates an average age of ∼50 Myr. Searches for evidence of current geological activity on Europa, such as plumes or surface changes, have yielded negative results to date. The current existence of a global subsurface ocean, while attractive in explaining the observations, remains inconclusive. Future geophysical measurements are essential to determine conclusively whether or not there is a liquid water ocean within Europa today.

Journal of Geophysical Research: Planets