Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological Society of America Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 13Linked to original sources
USGS2025

Estimation of dynamic geologic CO2 storage resources in the Illinois Basin, including effects of brine extraction, anisotropy, and hydrogeologic heterogeneity

Since the vast majority of carbon dioxide (CO 2 ) storage resources in the United States are in deep saline aquifers, optimizing the use of these saline storage resources could be crucial for efficient development of geologic CO 2 storage (GCS) resources and basin- or larger-scale deployment of GCS in the country. Maximum CO 2 injection rates can be enhanced by extracting brine from the CO 2 storage unit. However, disposal of the extracted brine is both a technological and economic challenge. The lowest-cost option would likely be reinjection of the extracted brine into another formation above or below the CO 2 storage unit. Therefore, it is important to estimate brine injectivity as it will constrain the potential to increase CO 2 injectivity at an injection site that has access to multiple geologic storage units where either CO 2 or brine can be injected. Using a simulation-optimization framework, coupled with a non-isothermal, multiphase CO 2 -water-salt equation-of-state module, we developed a computationally efficient method for evaluating optimization of simultaneous CO 2 injection, brine extraction, and brine (re)injection at hypothetical injection sites deployed across a geologic basin. The Illinois basin is ideal for testing our methodology because it contains multiple geologic storage units with seals in between them to isolate injection of CO 2 in one unit from interfering with the injection of either brine or CO 2 in another unit above or below it. In addition, we investigated the relative effects of variation in key geologic parameters as well as two reservoir structures (hydrogeologic heterogeneity/anisotropy and homogeneity/isotropy) on CO 2 injectivities and enhancement of CO 2 injectivity through extracting brine. Results suggest that permeability, depth, and especially thickness of the storage unit could be the most influential parameters determining CO 2 injectivity. They also suggest that only injecting CO 2 into the storage unit with the greatest injectivity, enhancing that unit’s injectivity by extracting brine, and disposing of the produced brine in other suitable units could maximize total CO 2 injectivity in limited regions of the basin. At the majority of simulated injection sites, however, we found that injecting CO 2 into all of the accessible and suitable storage units was more likely to maximize the CO 2 storage resource.

Illinois, Kentucky, Indiana↗
USGS2026

3D semantic mapping of surface geological features

Semantic mapping in 3D is fundamental to a wide range of geoscientific studies and applications, including geomorphology, hazard assessment, and environmental monitoring. However, automatically segmenting geological features from large-scale photogrammetric datasets remains a significant challenge. We present a methodology to address this gap. Using overlapping images collected over environments of interest, Structure-from-Motion (SfM) produces georeferenced point clouds and estimates camera poses. Existing large vision models, such as Segment Anything Model, segment objects in the images, generating pixel-segmentation associations. To produce pixel-point associations, we project the points back onto the camera image planes. As objects are independently segmented across multiple images with different perspectives, we develop a segmentation mosaicking algorithm to build probabilistic point-segmentation associations that combines the pixel-segmentation associations and pixel-point associations. Our methodology is validated using both synthetic data generated by Kubric and real-world UAV-SfM data. The implementation is designed to be compatible with existing SfM software, including Agisoft and OpenDroneMap, for photogrammetry mapping in geoscience studies. As a case study, we apply our method to the semantic mapping of precariously balanced rocks (PBRs), which provide upper-bound constraints on historical ground motion shaking intensity. To support object-level identification of PBRs, we additionally integrated Grounding DINO, enabling text-prompted segmentation of features of interest within UAV imagery. This case study demonstrates the effectiveness of our method in generating a 3D semantic map of PBRs, enabling spatial distribution of PBR fragility for earthquake hazard analysis.

Computers & Geosciences↗
USGS2023

Stratigraphic notes—Volume 1, 2022

This is the first volume in the U.S. Geological Survey (USGS) series of reports on stratigraphy entitled “Stratigraphic Notes,” which consists of short papers that highlight stratigraphic studies, changes in stratigraphic nomenclature, and explanations of stratigraphic names and concepts used on published geologic maps. “Stratigraphic Notes” is a long-term (multiyear), multivolume publication containing articles that address updates or revisions to stratigraphic nomenclature (and whose content ultimately will be incorporated by National Geologic Map Database personnel into Geolex, https://ngmdb.usgs.gov/Geolex/ ). We welcome papers for the “Stratigraphic Notes” series from geoscientists of the USGS, of State Geological Surveys, and from academicians. Papers can be submitted for publication in “Stratigraphic Notes” by contacting the USGS Geologic Names Committee ( gnc@usgs.gov ). As new “Stratigraphic Notes” volumes are published, links to the volumes will be posted at https://doi.org/10.3133/pp1879 . This first volume ("Stratigraphic notes—Volume 1, 2022") includes articles that provide guidance for those who wish to submit papers to “Stratigraphic Notes,” as well as information on how to make your manuscripts compliant for geologic names reviews and how to organize your paper’s content to facilitate inclusion of new or revised names in Geolex. This volume also includes some specific guidance on conducting geologic names reviews of geologic and hydrogeologic reports.

Professional Paper↗
USGS2024

Geologic map of the southern Stillwater Range, Nevada

The southern Stillwater Range in west-central Nevada contains the western part of the Oligocene Stillwater-Clan Alpine caldera complex, which extends about 55 kilometers (km) east from the west side of the Stillwater Range to the northwestern Desatoya Mountains. The complex consists of at least seven nested ignimbrite calderas and subjacent plutonic rocks emplaced into a complex basement composed of Mesozoic metasedimentary and metavolcanic rocks and Cretaceous granitic plutons. The calderas formed during large-volume (100s to greater than (>) 2,500 cubic kilometers [km 3 ]) eruptions of silicic ignimbrites between about 30.4 and 25.1 million years before present (Ma). The Job Canyon and Poco Canyon calderas and the western part of the much larger Elevenmile Canyon caldera, and their plutonic roots, are exposed in the southern Stillwater Range. There, the caldera complex was steeply tilted during large-magnitude crustal extension in the middle Miocene, and further exhumed during the late Miocene to Holocene Basin and Range extension that formed the modern Stillwater Range. This tilted crustal section affords an exceptional opportunity to view structural cross sections of ignimbrite calderas and their plutonic roots to paleodepths as much as 9–10 km.

Nevada↗
USGS2026

Cambrian and Ordovician stratigraphy, conodont biostratigraphy, and microfacies analysis to support 1:24,000-scale geologic mapping of the southern Lake Champlain valley, New York and Vermont

Introduction Geologic mapping in the southern Lake Champlain valley of New York and Vermont (fig. 1) has required evaluation of stratigraphic nomenclature used since the early 1900s. The paleogeography of the Cambrian and Ordovician adjacent to the Adirondack Highlands, the high-relief mountains of Proterozoic igneous and metamorphic rocks of northern New York, has impacted the lithostratigraphic succession, facies changes, and several hiatuses that occur within the package of clastic and carbonate rocks that demonstrates overall deepening consistent from the southern to northern Appalachians. The stratigraphic nomenclature used for the geologic mapping of the Cambrian and Ordovician strata of the study area is derived from evaluation of names put forth by previous workers from areas of northern New York and western Vermont. Descriptions of type localities or type sections and other criteria set forth by the North American Stratigraphic Code (North American Commission on Stratigraphic Nomenclature [NACSN], 2021) were consulted. The North American Stratigraphic Code states that lithostratigraphic units, such as the fundamental unit, the formation, be defined by lithic character and be mappable (NACSN, 2021, Article 24). However, some early workers (Walcott, 1912; Kay, 1937; Fisher and Hanson, 1951; Oxley and Kay, 1959) have defined stratigraphic units based on fossil content, which may or may not be facies dependent, and hence may not be mappable as lithostratigraphic units. Although preservation of older names takes priority in stratigraphic nomenclature (NACSN, 2021, Article 7), some do not have adequately defined stratotypes or are located a distance away with different lithologies than that in the study area. Biostratigraphy can be a helpful tool for understanding correlations and facies changes. Herein, conodont biostratigraphy is utilized to date and correlate separate lithologic units. Further, microfacies analyses of units through inspection of petrographic thin sections provide paleogeographic information that helps in understanding the genesis of geologic units.

New York, Vermont↗
USGS2026

New measurements indicate that natural geologic methane emissions from microseepage in the Michigan Basin are likely negligible

The magnitude of natural geologic methane (CH 4 ) emissions to the atmosphere (including emissions of fossil CH 4 from offshore and onshore gas and oil seeps, diffuse microseepage, mud volcanoes, volcanic vents, and geothermal areas) is highly uncertain. The largest component of geologic emissions is thought to be microseepage, which is the diffuse flux of CH 4 from soils across large areas of productive hydrocarbon basins. The accuracy of existing bottom-up estimates of microseepage is limited by low spatial coverage of published microseepage measurements. We present the first soil—atmosphere CH 4 flux measurements from Michigan Basin, USA. Results from 335 measurements taken during summer and winter seasons across a large portion of the basin suggest microseepage is nonexistent in the sampled region. Even areas with predictive features for microseepage (e.g., underlying mature, organically rich source rocks, proven gas accumulations, faults, and lineaments) yield null or negative fluxes, suggesting that CH 4 emissions from microseepage are negligible throughout our study region. A Monte Carlo method was used to place an upper limit on the regional-mean microseepage flux, in which synthetic patchy microseepage distributions were generated and tested against our observations to assess the impact of possible emission hot spots that were missed by our sampling strategy. Our analysis finds it is very unlikely that regional-mean emissions are as high as assumed in a previous global microseepage study. The observed lack of seepage may be explained by groundwater flow, active methanotrophy, glacial sediments, and bedded salt deposits, which could inhibit vertical gas migration and release to atmosphere.

Michigan↗
USGS2026

Evaluating the U.S. Geological Survey’s earthquake shaking hazard forecasts and their implications on seismic risk

We analyze the last six update cycles of the long-term probabilistic earthquake shaking hazard forecast from the U.S. Geological Survey (USGS) and discuss the changes in hazard estimates from the 1996 to the latest 2023 update of the National Seismic Hazard Model (NSHM) for the conterminous U.S. We summarize how our understanding of earthquake hazards has evolved over the last two decades and quantify the implications of changing hazards on people, buildings, and lifeline infrastructure. The net effect of changes in hazard estimates, with reference to the mean hazard from the 2023 NSHM update that has 2% probability of exceedance in 50 years, suggests an overall increase in total geographic areas facing very strong shaking levels (modified Mercalli Intensity (MMI) of VII or more) when compared with any of the previous cycles. This increase puts ~159.2 million people (an increase from 111.8 million when using the 2018 NSHM), ~47.3 million residential buildings (an increase from 32.5 million with the 2018 NSHM), and ~$25.6 trillion of economic exposure of all buildings (an increase from $17.4 trillion when using the 2018 NSHM) at risk from earthquakes. We demonstrate that small changes in hazard estimates do not necessarily imply small changes in risk estimates. Therefore, changes in risk estimates can be used to highlight key USGS NSHM updates for improving risk mitigation efforts.

Earthquake Spectra Journal↗
USGS2024

Classification of lakebed geologic substrate in autonomously collected benthic imagery using machine learning

Mapping benthic habitats with bathymetric, acoustic, and spectral data requires georeferenced ground-truth information about habitat types and characteristics. New technologies like autonomous underwater vehicles (AUVs) collect tens of thousands of images per mission making image-based ground truthing particularly attractive. Two types of machine learning (ML) models, random forest (RF) and deep neural network (DNN), were tested to determine whether ML models could serve as an accurate substitute for manual classification of AUV images for substrate type interpretation. RF models were trained to predict substrate class as a function of texture, edge, and intensity metrics (i.e., features) calculated for each image. Models were tested using a manually classified image dataset with 9-, 6-, and 2-class schemes based on the Coastal and Marine Ecological Classification Standard (CMECS). Results suggest that both RF and DNN models achieve comparable accuracies, with the 9-class models being least accurate (~73–78%) and the 2-class models being the most accurate (~95–96%). However, the DNN models were more efficient to train and apply because they did not require feature estimation before training or classification. Integrating ML models into benthic habitat mapping process can improve our ability to efficiently and accurately ground-truth large areas of benthic habitat using AUV or similar images.

Michigan, Wisconsin↗
USGS2024

3-D geological modeling for numerical flow simulation studies of gas hydrate reservoirs at the Kuparuk State 7-11-12 Pad in the Prudhoe Bay Unit on the Alaska North Slope

Accurate reservoir evaluation requires reliable three-dimensional (3-D) geological models. This study conducted 3-D geological modeling for numerical flow simulation of the B1 sand gas hydrate reservoir at the Kuparuk State 7-11-12 pad, Prudhoe Bay Unit, Alaska North Slope. The model integrates well logs, core, and seismic data to address spatial heterogeneity in geological structures and reservoir properties. Two modeling types were performed: structural framework modeling and petrophysical property modeling. For structural framework modeling, seismic data and well log markers were used to reproduce subsurface structures characterized by a normal fault system. A volume-based modeling algorithm and stair-step gridding were applied. The resulting 3-D model comprised 2,640,000 grid cells across 264 layers, including seven fault grids. For petrophysical property modeling, total porosity was initially modeled using sequential Gaussian simulation with collocated cokriging. To reproduce the upward coarsening of the B1 sand, upscaled log-derived total porosity and a 3-D trend depicting total porosity variation were used as primary and secondary data, respectively. Gas hydrate saturation distribution was modeled similarly, with secondary data from estimated porosity distribution and seismic-derived acoustic impedance map enhancing accuracy. Results indicate higher gas hydrate saturation in the upper part of the B1 sand and areas with higher acoustic impedance. Intrinsic permeability was modeled from the total porosity and clay-bound water volume, and effective permeability was derived from the gas hydrate saturation and intrinsic permeability distributions based on the “Tokyo model”. Effective permeability distributions were influenced by the total porosity, gas hydrate saturation, and intrinsic permeability. Within the same layer, higher gas hydrate saturation leads to decreased effective permeability. In total, 100 sets of multiple scenarios were prepared, providing input data for dynamic flow simulations to evaluate the effects of lateral heterogeneity in reservoir properties and the hydraulic characteristics of faults on production behavior for preassessment before the long-term production test.

Alaska↗
USGS2026

Evaluation of nutrient, alkalinity, and acid-neutralizing capacity stabilities in water samples analyzed by the U.S. Geological Survey National Water Quality Laboratory, 2023–24

The U.S. Geological Survey evaluated the stability of water-sample chemical analysis of nutrient, alkalinity, and acid-neutralizing capacity constituents with respect to the duration between sample collection and laboratory analysis, also known as the sample holding time. A study began in the spring of 2023 to evaluate the sample stability, between 2 and 180 days after sample collection, of the chemical properties and chemical constituents of alkalinity as calcium carbonate, filtered; acid-neutralizing capacity as calcium carbonate, unfiltered; total ammonia as nitrogen, filtered; total ammonia plus organic nitrogen as nitrogen, filtered and unfiltered; nitrite as nitrogen, filtered; nitrate plus nitrite as nitrogen, filtered; total nitrogen, filtered and unfiltered; orthophosphate as phosphorous, filtered; and total phosphorus as phosphorus (filtered and unfiltered) in water. Both surface water and groundwater matrices were represented. Sample instability varied by observed property and matrix; therefore, providing general guidance for sample holding time is not possible based on matrices alone. No correlations between field measurements of sample characteristics and sample instability were observed. Although observations for some properties indicate sample stability that exceeds the recognized U.S. Geological Survey National Water Quality Laboratory method holding times, this is not necessarily the case for matrices and seasonal characteristics that were not investigated. Based on the limited number of six sample sources used in this study, some patterns emerge for the 12 observed properties studied. Five observed properties generally indicate stability for as many as 180 days after sampling (total nitrogen as nitrogen, both filtered and unfiltered; orthophosphate as phosphorus, filtered; and phosphorus as phosphorus, both filtered and unfiltered). Other observed properties indicate stability for as many as 180 days for some matrices, but not for others. Finally, some observed properties indicate instability well before 180 days.

Scientific Investigations Report↗
USGS2024

Methodology for inclusion of produced and stored carbon dioxide in the U.S. Geological Survey Federal lands greenhouse gas inventory

The U.S. Geological Survey (USGS) has developed two new carbon dioxide (CO2) emissions and sequestration accounting methods for use in future reports. The first method is a Federal lease-produced CO2 emissions calculation for an update of the report, “Federal Lands Greenhouse Gas Emissions and Sequestration in the United States.” The methodology to incorporate Federal lease CO2 production emissions into the updated report relies on CO2 sales royalty data from the Office of Natural Resources Revenue (ONRR). The end usage points for the gas include enhanced oil recovery with CO2 (CO2-EOR), food and beverage, and chemical production. CO2-EOR is the main end point for natural CO2 production in the United States; it accounted for 94% of usage in 2022 [1]. Federal lands emissions from this sector are estimated at 460 metric tons of CO2 in 2022, a very small amount relative to most other Federal lands emissions sector estimates. The second new method, planned for a separate report, is a calculation of the geologic storage of CO2 on Federal lands. The second method estimates the CO2 stored under Federal surface lands and documents Federal climate change mitigation efforts. Currently, there is no storage of CO2 at an industrial level on Federal lands, however multiple proposals and projects are planned. This method was developed on non-Federal lands datasets in an effort to prepare for when these activities on Federal lands will require accounting. National estimates for CO2 geologic storage using this method, but without a Federal lands filtering step, totaled 8.0 million metric tons (Mt) in 2022. The two methods described here are new benchmark methods in a collection of accounting procedures to document the current state of greenhouse gas emissions and their storage on Federal lands. These benchmarks can then be used to measure any subsequent changes in emissions from or carbon storage beneath Federal lands. While the magnitude of the values is currently non-existent to small, emissions mitigation goals established by decision makers indicate that these values will grow, and their documentation will take on greater value and use.

continental United States↗
USGS2024

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗
USGS2026

The geologic history of the Chehalis Forearc Basin, Washington State, USA

The Chehalis basin is located between the Cascade arc and the Coast Range in southwest Washington State. It consists of sedimentary and volcanic rocks deposited throughout the Cenozoic and is underlain by the Siletzia terrane, a thick, large igneous province accreted in the Eocene. Here, we constrain evolution of the Chehalis basin depocenter using isochore maps derived from isostatic gravity anomalies, borehole data, and stratigraphy for several time periods: the Eocene (47.6–36.8 Ma), the Oligocene (36.8–20 Ma), and the Neogene (20–0 Ma). Our results suggest that local subsidence is driven by deformation on faults that bound and intersect the basin. We see northward depocenter migration, interpreted as a shift in deformation from the northwest striking Cedar Creek fault to the west striking Doty fault. We interpret these data in terms of the long-term north-south shortening and clockwise rotation of the Cascadia forearc. During the Eocene, the Cedar Creek fault was preferentially aligned with north-south shortening, but became less active when clockwise rotation brought the Doty fault into east-west alignment with the stress field. Sediment accumulation rates decreased from 196 m/Myr in the Paleogene (∼40–20 Ma) to 27 m/Myr in the Neogene (∼20–0 Ma) as Miocene uplift of the Coast Range limited accommodation space and shifted the depositional environment from marine to fluvial. Our results are consistent with the geologic evolution of the Portland and Tualatin basins to the south and reveal a depositional and structural history uniquely shaped by clockwise rotation of the Cascadia forearc.

Washington↗
USGS2024

Prioritizing US Geological Survey science on salinization and salinity in candidate and selected priority river basins

The US Geological Survey (USGS) is selecting and prioritizing basins, known as Integrated Water Science basins, for monitoring and intensive study. Previous efforts to aid in this selection process include a scientifically defensible and quantitative assessment of basins facing human-caused water resource challenges (Van Metre et al. in Environmental Monitoring and Assessment , 192(7), 458 2020). In the present work, we explore this ranking process based on water quality considerations, specifically salinity and salinization. We selected top candidate basins to study salinity and salinization issues in 18 hydrologic regions that include 163 candidate basins. Our prioritization is based on quantitative assessment of sources of salinity, drivers of change, and receptors that must respond to those sources and drivers. Source terms represented in the prioritization include geology, depth to brackish groundwater, stream conductivity, chloride in precipitation, urban and agricultural land use, application of road salt as a deicer, and irrigation. Drivers represented in prioritization include changes in chemical weathering as a result of changes in rainwater chemistry. Receptors include measures of water stress, measurements of stream ecological health, and socioeconomic factors. In addition, we present research activities for the USGS on salinity and salinization that can be pursued in these basins including assessment of sources, pathways, and loadings; predicting and understanding changes in sources, peaks, and trends; understanding the components of salinity and mobilization of contaminants; understanding the relationship between salinization and changing ecosystems; and developing knowledge on the causes and distribution of groundwater salinity, brackish water resources, and challenges related to desalination.

Enviornmental Monitoring and Assessment↗
USGS2025

Hydrogeologic mapping and three-dimensional geologic modeling of glacial deposits in a multicounty area of southeastern Michigan, northeastern Indiana, and northwestern Ohio

The glacial deposits underlying southeastern Michigan, northeastern Indiana, and northwestern Ohio are a substantial source of water to communities, agriculture, and industry in the region. Previous efforts to characterize aquifer materials in the area cited a need for additional information about the underlying hydrogeologic characteristics and related groundwater availability as well as improved mapping of the extent and properties of the glacial deposits. Recent U.S. Geological Survey multi-State compilations of water-well drilling records have greatly increased access to high-resolution geologic data, particularly in glacial depositional environments. This study by the U.S. Geological Survey, in cooperation with the Ohio Environmental Protection Agency, uses processed data from the State-managed collections of well records to characterize the glacial deposits in the study area using two methods. The first method creates two-dimensional maps of basic hydrogeologic information commonly required for assessments of groundwater availability, including (1) total thickness of glacial deposits, (2) total thickness of coarse-grained deposits, (3) specific-capacity-based transmissivity and hydraulic conductivity, and (4) texture-based estimated equivalent horizontal and vertical hydraulic conductivity and transmissivity. The second method builds a hydrogeologic framework of the complex glacial aquifer through construction of a volumetric geologic model by using three-dimensional kriging. Results of the volumetric model indicate that aquifer materials are primarily concentrated in the western parts of the study area near the Indiana-Ohio border. Coarse-grained sediments are also present as surficial deposits in the north of the study area where intermixing glacial advances created complex distributions of unconsolidated deposits. Two-dimensional maps of hydrogeologic properties support the volumetric model, showing thicknesses of coarse-grained deposits that reach up to 250 feet in the western sections of the study area and progressively thin to near absence in the east. Visualization of the aquifer materials with a volumetric model generally shows a highly discontinuous distribution of coarse- and fine-grained materials, with no clearly defined boundaries to delineate the extent of the aquifer. Comparisons of cross sections derived from the volumetric model with existing published maps support previous near-surface hydrogeologic interpretations while filling gaps where data are sparse, particularly in deeper parts of the aquifer. Both the two-dimensional maps and the volumetric model provide data that can directly inform assessments of groundwater availability, in addition to having future applications to studies of groundwater flow and transport.

Indiana, Michigan, Ohio↗
USGS2024

U.S. Geological Survey Karst Interest Group proceedings, Nashville, Tennessee, October 22-24, 2024

Karst hydrogeologic systems represent challenging and unique conditions to scientists studying groundwater flow and contaminant transport. Karst terrains are characterized by distinct and beautiful landscapes, caverns, and springs, and many of the exceptional karst areas are designated as national or state parks. The range and complexity of landforms and groundwater flow systems associated with karst terrains are enormous, perhaps more than any other aquifer type. The U.S. Geological Survey (USGS) Karst Interest Group (KIG), formed in 2000, is a loosely knit, grassroots organization of USGS and non-USGS scientists and researchers devoted to fostering better communication among scientists working on, or interested in, karst aquifers. The primary mission of the KIG is to encourage and support interdisciplinary collaboration and technology transfer among scientists working in karst areas. To accomplish its mission, the KIG has organized a series of workshops. To date (2024), nine KIG workshops, including the workshop documented in this report, have been held. The abstracts and extended abstracts provide a snapshot in time of past and current karst related studies. The USGS Water Availability and Use Science Program funded the workshop and proceedings. The planning committee for the ninth workshop includes Thomas D. Byl (USGS and Tennessee State University), Allan K. Clark (USGS), Laura M. DeMott (USGS), Eve L. Kuniansky (USGS, Emeritus), Benjamin V. Miller (USGS), and Lawrence E. Spangler (USGS, Emeritus). The workshop proceedings are edited by Eve L. Kuniansky and Lawrence E. Spangler. The field trip guide was produced by Benjamin V. Miller and Brian Ham (Tennessee Department of Environment and Conservation) and included in the proceedings from the KIG’s 2021 virtual workshop to be used on the optional field trip held on Thursday, October 24, 2024.

Open-File Report↗
USGS2026

Integrating detrital magnetite geochemistry and (U-Th)/He chronometry as a sediment provenance tool in geologic and metallogenic terranes

Magnetite is ubiquitous in porphyry Cu systems and in sediment sourcing both barren and mineralized regions, with potential as an indicator mineral in concealed and coarsely-mapped terranes. We develop and test a workflow for integrated geochemistry and (U–Th)/He (He) dating for inferring detrital magnetite (DMt) provenance in these settings. The ca. 70 Ma Taurus porphyry Cu–Mo(–Au) district in eastern interior Alaska serves as a test case. DMt from streams draining porphyry-related mineralization was characterized by geochemistry and mineral inclusion and microstructure observations, complemented by similar data for potential porphyry and host rock sources. Principal component analysis and clustering of DMt geochemical data resolve multiple populations in our samples geochemically and texturally compatible with derivation from metamorphic, porphyry-related hydrothermal, and igneous sources. Hydrothermal magnetite comprises ∼16–50% of DMt nearest porphyry mineralization but diminishes to ∼4% ∼15 km downstream. Subsampled grains within populations yield ∼160–110 Ma, ∼70 Ma, ∼55 Ma, and ∼20 Ma magnetite He date modes. Combined with provenance, He dates capture Early Cretaceous regional exhumation of metamorphic host rock and Late Cretaceous porphyry Cu mineralization. DMt grains showing partial hematite replacement yield ca. 55–20 Ma dates regardless of source, overlapping regional warm/wet climatic intervals. We interpret Cenozoic dates to reflect exhumation to near-surface oxidizing conditions and(or) supergene weathering. Magnetite is thus a promising target phase for (1) tracking the spatiotemporal distribution of porphyry systems, and (2) linking the formation and exhumation of these systems to a regional geologic history, both in Alaska and globally.

Alaska, Yukon↗