Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources
USGS2005

Iowa magnetic and gravity maps and data: A web site for distribution of data

Magnetic anomalies are due to variations in the Earth's magnetic field caused by the uneven distribution of magnetic minerals (primarily magnetite) in the rocks that make up the upper part of the Earth's crust. The features and patterns of the magnetic anomalies can be used to delineate details of subsurface geology, including the locations of buried faults and magnetite-bearing rocks and the depth to the base of sedimentary basins. This information is valuable for mineral exploration, geologic mapping, and environmental studies. The Iowa magnetic map is constructed from grids that combine information collected in nine separate magnetic surveys conducted between 1953 and 1972. The data from these surveys are of varying quality. The design and specifications (terrain clearance, sampling rates, line spacing, and reduction procedures) varied from survey to survey depending on the purpose of the project and the technology of that time. Every attempt was made to acquire the data in digital form. All survey grids have been continued to 305 m (1,000 ft) above ground and merged together to form the State compilation.

Iowa↗
USGS2010

Design and Compilation of a Geodatabase of Existing Salinity Information for the Rio Grande Basin, from the Rio Arriba-Sandoval County Line, New Mexico, to Presidio, Texas, 2010

The U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, compiled salinity-related water-quality data and information in a geodatabase containing more than 6,000 sampling sites. The geodatabase was designed as a tool for water-resource management and includes readily available digital data sources from the U.S. Geological Survey, U.S. Environmental Protection Agency, New Mexico Interstate Stream Commission, Sustainability of semi-Arid Hydrology and Riparian Areas, Paso del Norte Watershed Council, numerous other State and local databases, and selected databases maintained by the University of Arizona and New Mexico State University. Salinity information was compiled for an approximately 26,000-square-mile area of the Rio Grande Basin from the Rio Arriba-Sandoval County line, New Mexico, to Presidio, Texas. The geodatabase relates the spatial location of sampling sites with salinity-related water-quality data reported by multiple agencies. The sampling sites are stored in a geodatabase feature class; each site is linked by a relationship class to the corresponding sample and results stored in data tables.

Data Series↗
USGS2008

Borehole Geophysical Logging Program: Incorporating New and Existing Techniques in Hydrologic Studies

The borehole geophysical logging program at the U.S. Geological Survey (USGS)-Florida Integrated Science Center (FISC) provides subsurface information needed to resolve geologic, hydrologic, and environmental issues in Florida. The program includes the acquisition, processing, display, interpretation, and archiving of borehole geophysical logs. The borehole geophysical logging program is a critical component of many FISC investigations, including hydrogeologic framework studies, aquifer flow-zone characterization, and freshwater-saltwater interface delineation.

Fact Sheet↗
USGS2015

Sea-floor texture and physiographic zones of the inner continental shelf from Salisbury to Nahant, Massachusetts, including the Merrimack Embayment and Western Massachusetts Bay

A series of maps that describe the distribution and texture of sea-floor sediments and physiographic zones of Massachusetts State waters from Nahant to Salisbury, Massachusetts, including western Massachusetts Bay, have been produced by using high-resolution geophysical data (interferometric and multibeam swath bathymetry, lidar bathymetry, backscatter intensity, and seismic reflection profiles), sediment samples, and bottom photographs. These interpretations are intended to aid statewide efforts to inventory and manage coastal and marine resources, link with existing data interpretations, and provide information for research focused on coastal evolution and environmental change. Marine geologic mapping of the inner continental shelf of Massachusetts is a statewide cooperative effort of the U.S. Geological Survey and the Massachusetts Office of Coastal Zone Management.

Massachusetts↗
USGS2018

Concentrations of lead and other inorganic constituents in samples of raw intake and treated drinking water from the municipal water filtration plant and residential tapwater in Chicago, Illinois, and East Chicago, Indiana, July–December 2017

The U.S. Geological Survey (USGS) Environmental Health Mission Area (EHMA) is providing comprehensive science on sources, movement, and transformation of contaminants and pathogens in watershed and aquifer drinking-water supplies and in built water and wastewater infrastructure (referred to as the USGS Water and Wastewater Infrastructure project) in the Greater Chicago Area and elsewhere in the United States, to fill data gaps identified by stakeholders and collaborators in drinking water and public health. EHMA Water and Wastewater Infrastructure research specifically provides insight into natural factors in the environment as well as those water-infrastructure components and processes (such as source-water corrosivity, treatment, plumbing, and so forth) that might influence human exposure to chemical and microbial contaminants at the residential tap. This infrastructure-exposure research role is fulfilled uniquely by the USGS and not by the U.S. Environmental Protection Agency (EPA), other agencies, or municipalities that focus on regulatory and policy activities and related compliance. The USGS approach to assessing the possible links between human health and chemical contaminant and pathogen exposure in drinking water is conducted in collaboration with public health experts and includes comprehensive characterization of the presence/absence and concentrations of more than 500 organic and 27 inorganic chemical constituents at the point of use (tap). Laboratory results for lead and other inorganic contaminants in Chicago, Illinois, and East Chicago, Indiana, residential tapwater are being released to ensure the timely release of quality-assured data to participants in the study. Concentrations of lead and other inorganic constituents were assessed in drinking water at the point of use (kitchen tap or filter) in 45 residential locations and in two locations within each of the two Chicago water purification plants and the two East Chicago water filtration plants during July–December 2017. Three methods were used for analyzing lead. The most sensitive method had a reporting limit of 0.020 micrograms per liter (µg/L). When using the most sensitive analytical method, lead was detected in 39 of 45 residential tapwater samples, with concentrations ranging from less than 0.020 µg/L to 5.31 µg/L (median of the detected values = 0.481 µg/L). Concentrations of lead also were detected in Lake Michigan intake water at all water purification/filtration plant facilities at concentrations ranging from 0.083 to 0.330 µg/L, but were not detected above the reporting limit in any samples of treated, pre-distribution drinking water at any of the water purification/filtration plant facilities. Because the USGS Water and Wastewater Infrastructure project in the Greater Chicago Area is focused on the potential human exposure to a broad suite of organic and inorganic contaminants in drinking water and is not focused specifically on lead, the sampling protocol did not include “first-draw,” stagnant sampling and samples were collected with point-of-use treatment in place, if present. Thus, the lead results reported herein are not appropriate for assessment of compliance with the EPA 1991 Lead and Copper Rule. Information resources for lead mitigation and water filtration are provided.

Illinois, Indiana↗
USGS2018

Methods used for the collection and analysis of chemical and biological data for the Tapwater Exposure Study, United States, 2016–17

In 2016, the U.S. Geological Survey (USGS) Environmental Health Mission Area, initiated the Tapwater Exposure Study as part of an infrastructure project to assess human exposure to potential threats from complex mixtures of contaminants. In the pilot phase (2016), samples were collected from 11 States throughout the United States, and in the second phase (2017), the study focused on the Greater Chicago area, including North and South Chicago, Illinois, and East Chicago, Indiana. Residential tapwater samples were collected at private residences during both phases, and during the first phase, samples were collected from Federal office buildings and from one office 19-liter water-bottle source. During the second phase, raw intake and treated (pre-distributional) water samples also were collected from four drinking-water treatment facilities in the Greater Chicago area. Samples were sent to laboratories at the USGS, U.S. Environmental Protection Agency, National Institute of Environmental Health Sciences, and Colorado School of Mines Center for Environmental Risk Assessment, for potential drinking-water pathogens, chemical, and bioassay analyses. These analyses included more than 400 chemicals such as trace elements, steroid hormones, pharmaceuticals, volatile organic compounds, pesticides, per- and polyfluorinated alkyl substances, cyanotoxins, and other organic compounds. The in vitro bioassay analyses included estrogen, androgen, and glucocorticoid receptor activity.

Open-File Report↗
USGS2001

Surface-water, water-quality, and ground-water assessment of the Municipio of Carolina, Puerto Rico, 1997-99

To meet the increasing need for a safe and adequate supply of water in the municipio of Carolina, an integrated surface-water, water-quality, and ground-water assessment of the area was conducted. The major results of this study and other important hydrologic and water-quality features were compiled in a Geographic Information System and are presented in two 1:30,000-scale map plates to facilitate interpretation and use of the diverse water-resources data. Because the supply of safe drinking water was a critical issue during recent dry periods, the surface-water assessment portion of this study focused on analysis of low-flow characteristics in local streams and rivers. Low-flow characteristics were evaluated for one continuous-record gaging station, based on graphical curve-fitting techniques and log-Pearson Type III frequency analysis. Estimates of low-flow characteristics for seven partial-record stations were generated using graphical-correlation techniques. Flow-duration characteristics were computed for the one continuous-record gaging station and were estimated for the partial-record stations using the relation curves developed from the low-flow study. Stream low-flow statistics document the general hydrology under current land and water use. Low-flow statistics may substantially change as a result of streamflow diversions for public supply, and an increase in ground-water development, waste-water discharges, and flood-control measures; the current analysis provides baseline information to evaluate these impacts and develop water budgets. A sanitary quality survey of streams utilized 29 sampling stations to evaluate the sanitary quality of about 87 miles of stream channels. River and stream samples were collected on two occasions during base-flow conditions and were analyzed for fecal coliform and fecal streptococcus. Bacteriological analyses indicate that a significant portion of the stream reaches within the municipio of Carolina may have fecal coliform concentrations above the water-quality goal established by the Puerto Rico Environmental Quality Board (Junta de Calidad Ambiental de Puerto Rico) for inland surface waters. Sources of fecal contamination may include: illegal discharge of sewage to storm-water drains, malfunctioning sanitary sewer ejectors, clogged and leaking sewage pipes, septic tank leakage, unfenced livestock, and runoff from livestock pens. Long-term fecal coliform data at two sampling stations, Quebrada Blasina in Carolina and the Rio Grande de Loiza, downstream from the town of Trujillo Alto, indicate that the sanitary quality of Quebrada Blasina is and has generally been poor for more than a decade. The sanitary quality of the Rio Grande de Loiza has generally been in compliance with the water-quality goal standard fecal coliform concentrations established in July 1990 by the Puerto Rico Environmental Quality Board. Geologic, topographic, soil, hydrogeologic, and streamflow data were used to divide the municipio of Carolina into five hydrogeologic terranes. This integrated database was then used to evaluate the ground-water potential of each hydrogeologic terrane. Analysis suggests that areas with slopes greater than 15 degrees have relatively low ground-water development potential. Fractures may be locally important in enhancing the water-bearing properties in the hydrogeologic terranes containing igneous rocks. Potentiometric-surface elevations recorded in piezometers installed in the coastal area during this study were used to define ground-water flow directions in the hydrogeologic terranes composed of coastal plain clastic and limestone units. The resultant potentiometric map indicates that the coastal plain aquifer and streams in the lowland parts of the municipio of Carolina are hydraulically connected. The potentiometric map also indicates that ground-water discharge to the Rio Grande de Loiza, downstream from highway PR-3, has been enhanced by dredging of the streambed for

Water-Resources Investigations Report↗
USGS1967

Reconnaissance of the chemical quality of surface waters of the Neches River basin, Texas

The kinds and quantities of minerals dissolved in the surface water of the Neches River basin result from such environmental factors as geology, streamflow patterns and characteristics, and industrial influences. As a result of high rainfall in the basin, much of the readily soluble material has been leached from the surface rocks and soils. Consequently, the water in the streams is usually low in concentrations of dissolved minerals and meets the U.S. Public Health Service drinking-water standards. In most streams the concentration of dissolved solids is less than 250 ppm (parts per million). The Neches River drains an area of about 10,000 square miles in eastern Texas. From its source in southeast Van Zandt County the river flows in a general southeasterly direction and empties into Sabine Lake, an arm of the Gulf of Mexico. In the basin the climate ranges from moist subhumid to humid, and the average annual rainfall ranges from 46 inches is the northwest to more than 52 inches in the southeast. Annual runoff from the basin has averaged 11 inches; however, runoff rates vary widely from year to year. The yearly mean discharge of the Neches River at Evadale has ranged from 994 to 12,720 cubic feet per second. The rocks exposed in the Neches River basin are of the Quaternary and Tertiary Systems and range in age from Eocene to Recent. Throughout most of the basin the geologic formations dip generally south and southeast toward the gulf coast. The rate of dip is greater than that of the land surface; and as a result, the older formations crop out to the north of the younger formations. Water from the outcrop areas of the Wilcox Group and from the older formations of the Claiborne Group generally has dissolved-solids concentrations ranging from 100 to 250 ppm; water from the younger formations has concentrations less than 100 ppm. The northern half of the basin has soft water, with less than 60 ppm hardness. The southern half of .the basin has very soft water, usually with less than 30 ppm hardness. The chloride concentrations are less than 20 ppm in surface water in the southern half of the basin and usually range from 20 to 100 ppm in the northern half of the basin. Concentrations greater than 100 ppm are found only where pollution is occurring. The Neches River basin has an abundance of surface water, but uneven distribution of runoff makes storage projects necessary to provide dependable water supplies. The principal existing reservoirs, with the exception of Striker Creek Reservoir, contain water of excellent quality. Chemical-quality data for the Striker Creek drainage area indicate that its streams are affected by .the disposal of brines associated with oil production. Sam Rayburn Reservoir began impounding water in 1965. The water impounded should prove of acceptable quality for most uses, but municipal and industrial wastes released into the Angelina River near Lufkin may have a degrading effect on the quality of the water, especially during extended periods of low flows. Water available for storage at the many potential reservoir sites will be of good quality; but, if the proposed salt-water barrier is to impound acceptable water, the disposal of oilfield brine into Pine Island Bayou should be discontinued.

Water Supply Paper↗
USGS2009

Using GIS to assess priorities of infrastructure and health needs of colonias along the United States-Mexico border

Colonias, which are unincorporated border setdements in the United. States, have emerged in rural areas without the governance and services normally provided by local government. Colonia residents live in poverty and lack adequate health care, potable water, and sanitation systems. These conditions create substantial health risks for themselves and surrounding communities. By 2001, more than 1,400 colonias were identified in Texas. Cooperation with several Federal and Texas state agencies has allowed the U.S. Geological Survey (USGS) to improve colonia Geographic Information System (GIS) boundaries and develop the Colonia Health, Infrastructure, and Platting Status tool (CHIPS). Together, the GIS boundaries and CHIPS aid the Texas government in prioritizing the limited funds that are available for infrastructure improvement. CHIPS's report: generator can be tailored, to the needs of the user, providing either broad or specific output. CHIPS is publicly available on the U.S. Geological Survey Border Environmental Health Initiative website at http://borderhealth.cr. usgs.gov.

Journal of Latin American Geography↗
USGS2018

Monitoring wadeable stream habitat conditions in Southeast Coast Network parks: Protocol narrative

The Southeast Coast Network (SECN) has initiated a monitoring effort to assess habitat conditions in wadeable streams at national parks, recreation areas, battlefields, and monuments in Alabama, Georgia, and South Carolina. This monitoring effort includes Chattahoochee River National Recreation Area, Kennesaw Mountain National Battlefield Park, Congaree National Park, Horseshoe Bend National Military Park, and Ocmulgee National Monument. Stream habitat monitoring was implemented in 2016, and focuses specifically on providing relevant data to assess the physical condition of Piedmont and upper Coastal Plain streams with respect to aquatic and riparian habitats and how these habitats may be changing over time. The habitat assessment methods proposed in this protocol rely on standard data collection methods and standard operating procedures currently in use by the U.S. Geological Survey, U.S. Environmental Protection Agency, and U.S. Forest Service that have been modified to better meet the needs of National Park Service (NPS) managers. The Southeast Coast Network’s wadeable stream protocol was developed to begin a monitoring program that will provide insight into the status of, and trends in, stream and riparian habitat conditions. The number of reaches surveyed at each park is dependent on the spatial extent of the park and the total number of wadeable streams that are present within park boundaries. Regardless of the size of the park and the number of reaches that are to be monitored, selected reaches (1) are representative of the processes influencing the streams in each park; (2) can address current and anticipated management concerns, and (3) offer the most utility for future complementary studies.

Natural Resource Report↗
USGS2009

Environmental effects of hydrothermal alteration and historical mining on water and sediment quality in Central Colorado

The U.S. Geological Survey conducted an environmental assessment of 198 catchments in a 54,000-km2 area of central Colorado, much of which is on Federal land. The Colorado Mineral Belt, a northeast-trending zone of historical base- and precious-metal mining, cuts diagonally across the study area. The investigation was intended to test the hypothesis that degraded water and sediment quality are restricted to catchments in which historical mining has occurred. Water, streambed sediment, and aquatic insects were collected from (1) catchments underlain by single lithogeochemical units, some of which were hydrothermally altered, that had not been prospected or mined; (2) catchments that contained evidence of prospecting, most of which contain hydrothermally altered rock, but no historical mining; and (3) catchments, all of which contain hydrothermally altered rock, where historical but now inactive mines occur. Geochemical data determined from catchments that did not contain hydrothermal alteration or historical mines met water quality criteria and sediment quality guidelines. Base-metal concentrations from these types of catchments showed small geochemical variations that reflect host lithology. Hydrothermal alteration and mineralization typically are associated with igneous rocks that have intruded older bedrock in a catchment. This alteration was regionally mapped and characterized primarily through the analysis of remote sensing data acquired by the ASTER satellite sensor. Base-metal concentrations among unaltered rock types showed small geochemical variations that reflect host lithology. Base-metal concentrations were elevated in sediment from catchments underlain by hydrothermally altered rock. Classification of catchments on the basis of mineral deposit types proved to be an efficient and accurate method for discriminating catchments that have degraded water and sediment quality. Only about 4.5 percent of the study area has been affected by historical mining, whereas a larger part of the study area is underlain by hydrothermally altered rock that has weathered to produce water and sediment with naturally elevated geochemical baselines.

Colorado↗
USGS2011

Earthquakes in Mississippi and vicinity 1811-2010

This map summarizes two centuries of earthquake activity in Mississippi. Work on the Mississippi map was done in collaboration with the Mississippi Department of Environmental Quality, Office of Geology. The earthquake data plotted on the map are from several sources: the Mississippi Department of Environmental Quality, the Center for Earthquake Research and Information, the National Center for Earthquake Engineering Research, and the Arkansas Geological Survey. In addition to earthquake locations, other materials include seismic hazard and isoseismal maps and related text. Earthquakes are a legitimate concern in Mississippi and parts of adjacent States. Mississippi has undergone a number of felt earthquakes since 1811. At least two of these events caused property damage: a magnitude 4.7 earthquake in 1931, and a magnitude 4.3 earthquake in 1967. The map shows all historical and instrumentally located earthquakes in Mississippi and vicinity between 1811 and 2010. The largest historic earthquake in the vicinity of the State was an intensity XI event, on December 16, 1811; the first earthquake in the New Madrid sequence. This violent event and the earthquakes that followed caused considerable damage to the then sparsely settled region.

Alabama, Arkansas, Louisiana, Mississippi, Tenness↗
USGS1993

Integrated mineral-resource and mineral-environmental assessments of public lands: Applications for land management and resource planning

Mineral-deposit geology is an important control on natural contamination from unmined mineral deposits, and on the environmental effects of mining and mineral processing. The U. S. Geological Survey, Office of Mineral Resources (USGS/OMR) is now integrating geology-based environmental assessments into its mineral resource assessments of public and other lands. This report presents prototype mineralenvironmental assessments of the State of Colorado and the San Juan National Forest. The following pages will show examples of how geologic information can be used to help predict and prevent adverse environmental effects of mineralresource development.

Colorado↗
USGS2010

Examination of Libby, Montana, Fill Material for Background Levels of Amphibole from the Rainy Creek Complex Using Scanning Electron Microscopy and X-Ray Microanalysis

Natural background levels of Libby-type amphibole in the sediment of the Libby valley in Montana have not, up to this point, been determined. The purpose of this report is to provide the preliminary findings of a study designed by both the U.S. Geological Survey and the U.S. Environmental Protection Agency and performed by the U.S. Geological Survey. The study worked to constrain the natural background levels of fibrous amphiboles potentially derived from the nearby Rainy Creek Complex. The material selected for this study was sampled from three localities, two of which are active open-pit sand and gravel mines. Seventy samples were collected in total and examined using a scanning electron microscope equipped with an energy dispersive x-ray spectrometer. All samples contained varying amounts of feldspars, ilmenite, magnetite, quartz, clay minerals, pyroxene minerals, and non-fibrous amphiboles such as tremolite, actinolite, and magnesiohornblende. Of the 70 samples collected, only three had detectable levels of fibrous amphiboles compatible with those found in the rainy creek complex. The maximum concentration, identified here, of the amphiboles potentially from the Rainy Creek Complex is 0.083 percent by weight.

Open-File Report↗
USGS2014

Decision support system development at the Upper Midwest Environmental Sciences Center

A Decision Support System (DSS) can be defined in many ways. The working definition used by the U.S. Geological Survey Upper Midwest Environmental Sciences Center (UMESC) is, “A spatially based computer application or data that assists a researcher or manager in making decisions.” This is quite a broad definition—and it needs to be, because the possibilities for types of DSSs are limited only by the user group and the developer’s imagination. There is no one DSS; the types of DSSs are as diverse as the problems they help solve. This diversity requires that DSSs be built in a variety of ways, using the most appropriate methods and tools for the individual application. The skills of potential DSS users vary widely as well, further necessitating multiple approaches to DSS development. Some small, highly trained user groups may want a powerful modeling tool with extensive functionality at the expense of ease of use. Other user groups less familiar with geographic information system (GIS) and spatial data may want an easy-to-use application for a nontechnical audience. UMESC has been developing DSSs for almost 20 years. Our DSS developers offer our partners a wide variety of technical skills and development options, ranging from the most simple Web page or small application to complex modeling application development.

Upper Midwest↗
USGS2002

Geological framework data from Long Island Sound, 1981-1990: A digital data release

Introduction Since 1980 the Coastal and Marine Geology Program of the U.S. Geological Survey and Connecticut Department of Environmental Protection have conducted a joint program of cooperative geologic research in Long Island Sound and its vicinity. As part of this program, a highly successful regional-scale study of the geologic framework was completed. Reconnaissance high-resolution seismic reflection data were collected and used to establish the basic stratigraphy within the Sound and to map the major geologic units; field verification of the geologic interpretations of the seismic profiles was primarily accomplished with vibratory cores. These interpretations were in turn used to produce basin-wide syntheses of the late Quaternary depositional history. Unfortunately, the original seismic records and core logs were generated only in analog form. These unique paper documents, which are still under demand for industrial applications and academic research, are fragile and have become ragged from frequent use. The purpose of this report is to preserve these data by converting the seismic profiles, core descriptions, and ancillary reports into digital form, and to organize these files into a product that can be more readily accessed and disseminated. Not all of the existing high-resolution seismic-reflection surveys, collected in Long Island Sound through cooperatives with the U.S. Geological Survey and the Connecticut Department of Environmental Protection, have been incorporated into this report. These surveys, whose records are still in need of preprocessing and annotation, generally cover smaller areas along the Connecticut coast and were originally intended to provide additional detail to the larger, more regional data sets presented herein. The digital release of the omitted data sets is planned as part of a future product.

Connecticut, New York↗
USGS2002

Produced water and hydrocarbon releases at the Osage-Skiatook petroleum environmental research sites, Osage County, Oklahoma: Introduction and geologic setting

In February 2001, the USGS started studies of the impacts of produced water and hydrocarbon releases at 2 research sites adjacent to Skiatook Lake in southeastern Osage County near Tulsa, Oklahoma. Both sites are in a dissected area of modest relief underlain by interbedded shale, siltstone, and sandstone. Thicker resistant sandstone units typically form the hill crests. Hillslopes are underlain by shale, siltstone, and thin sandstone beds. Core drilling during February and March of 2002 indicates that the depth of weathering of the bedrock is about 10-25 m on the ridges and 5-6 m in small stream valleys. These sites are located in the Cross Timbers ecosystem area of northeastern Oklahoma. Oak forests cover the hillslopes. Grassslands occur on most ridge crests. Site "A" is an area where produced water and hydrocarbon releases occurred primarily 60-85 years ago. The site is located in section 13, T22N, R10E. The entire site is underlain by 1) a surface layer of eolian sand of varying thickness (maximum observed about 80 cm); 2) colluvium that ranges from large boulders of sandstone to thin, granule-pebble conglomerate; 3) weathered shale, siltstone, and sandstone; and 4) underlying unweathered bedrock. Much of the site appears to have been impacted by early salt-water releases that killed the oak forest, however a few oak trees persist as single trees or clumps of trees within the original kill area. The gently sloping upper part of the site is slightly eroded in places and has been mostly revegetated with grasses, forbs, sumac, and a few trees. The lower, steeper, more heavily salt-impacted portion has been eroded to depths of as much as 2 m. This area drains into the Cedar Creek arm of Skiatook Lake. Oil from two redwood tanks at the top of the site was transported via ditch to two roadside pits at mid-site. Oil spills from pipeline breaks and tank batteries (no longer present) are scattered around the site. Most of the oil is highly weathered however, one pit contains what appears to be relatively fresh asphaltic tank bottom material. Site "B" is located in sections 29 and 32, T22N, R10E. It includes an active production tank battery and adjacent large pit, two injection well sites, one with an adjacent small pit, and an old tank battery. All of these sites are within 45 m of the shoreline of the lake (at normal pool elevation). The pit associated with the active tank battery is within 15 m of the lake. Two small creeks cross the northern and southern parts of the site. The upper part of the site is characterized by a thin surface layer of eolian sand mixed with sandstone-clast colluvium underlain by weathered and unweathered shale whereas the lower part of the site is underlain by 1) a surface layer of eolian sand (20-70 cm thick); 2) colluvial apron and alluvial deposits of varying thickness comprised of sandstone pebbles, cobbles, and boulders with a fine sand matrix; 3) weathered shale; and 4) unweathered bedrock. Three salt scars extend downslope from the active tank battery, the injection well/pit, and the old tank battery to the lake edge. The area underlain by shallow saline ground water is substantially larger than the salt-scarred areas. Dissolved hydrocarbons can be detected in the shallow ground water below the active pit.

Oklahoma↗