Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Earthquake Spectra Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

489 records · Page 13Linked to original sources
USGS2026

The potential impact of three-dimensional distributed slip models derived from real-time GNSS data on the performance of the ShakeAlert earthquake early warning system for slab interface earthquakes

The ShakeAlert® earthquake early warning (EEW) system is designed to warn users of imminent strong ground motion with sufficient time to take protective actions. ShakeAlert currently uses three algorithms to characterize the earthquake source. One estimates the location and magnitude using the first few seconds of the P wave and, while fast, tends to underestimate magnitude for M w 7.0+ earthquakes. A second estimates the location, orientation, length, and corresponding magnitude of a line source using observed peak ground acceleration and contributes primarily to M w 5.5+ earthquakes. The third infers earthquake magnitude from peak ground displacement measured using Global Navigation Satellite System (GNSS) data and offers nonsaturating magnitudes for M w 7.0+ earthquakes. Other EEW algorithms exist that infer temporally evolving spatially variable slip on a 3D fault surface from real‐time GNSS data, information that might enable more accurate and timely alerts in the event of large‐magnitude subduction interface earthquakes. Here, we evaluate the potential contribution of one such algorithm, BEFORES ( Minson et al. , 2014 ), to improve ShakeAlert performance through a simulated real‐time implementation of Bayesian evidence‐based fault orientation and real‐time earthquake slip (BEFORES) and other ShakeAlert algorithms using data for eight M w 7.6+ earthquakes. The test results demonstrate that BEFORES can produce well‐constrained and accurate magnitude estimates as soon as or sooner than other EEW algorithms, in turn enabling it to increase the amount of warning time users receive in many cases. However, with a modified Mercalli intensity (MMI) threshold of 3.5, which is commonly used for issuing alerts, BEFORES would tend to alert large geographic regions that did not feel strong shaking (MMI 6+). This effect can be mitigated using a higher alert threshold of MMI 4.5 without negative impact on the amount of warning time obtainable with BEFORES.

Bulletin of the Seismological Society of America↗
USGS2024

Plan to coordinate post-earthquake investigations supported by the National Earthquake Hazards Reduction Program (NEHRP)

Introduction This report presents a plan supported by the National Earthquake Hazards Reduction Program (NEHRP) to coordinate domestic and international post-earthquake investigations (herein called “the Plan”). Post-earthquake scientific and engineering investigations are undertaken to capture critical information to understand the causes and impacts of the event, lessons from which can substantially improve the Nation’s resilience after future earthquakes. NEHRP is the Federal Government’s coordinated nationwide program to reduce risks to life and property from earthquakes. The Plan describes the activation and coordination of the four designated NEHRP Agencies in the Federal Government: Federal Emergency Management Agency, National Institute of Standards and Technology, U.S. National Science Foundation, and U.S. Geological Survey (USGS). The Plan also describes coordination between NEHRP Agencies and other organizations that may participate in pre-event and post-earthquake investigations, including non-NEHRP Federal agencies; State, regional, local, Tribal, and territorial agencies; domestic nongovernmental organizations; academic institutions and affiliated organizations; private companies; foreign governmental agencies and nongovernmental organizations; and international organizations. The Plan delineates the coordination of NEHRP post-earthquake scientific and engineering investigations to document the direct, indirect, and cascading physical and societal impacts from fault rupture and ground shaking hazards and from secondary hazards such as landslides, liquefaction, and tsunamis. In addition, the Plan identifies pre-event activities necessary to ensure that post-earthquake investigations are executed effectively. The USGS is the lead NEHRP Agency for activating and coordinating NEHRP post-earthquake investigations and for implementing this Plan. The USGS also leads coordination of the NEHRP Agencies in completing the pre-event activities identified in the Plan. The Plan has new information and supersedes USGS Circular 1242, “The Plan to Coordinate NEHRP Post-Earthquake Investigations,” which was published in 2003. This second-generation Plan was developed with the assistance of the Applied Technology Council (ATC) of Redwood City, California, under USGS contract 140G0121P0309, ATC-155. A 17-member Project Review Panel provided guidance on plan development, and input was solicited from subject matter experts representing key stakeholder groups and from participants at a public workshop.

Circular↗
USGS2025

Estimating earthquake source depth using teleseismic broadband waveform modeling at the USGS National Earthquake Information Center

The U.S. Geologic Survey National Earthquake Information Center (NEIC) monitors global seismicity, producing a catalog of earthquake source parameters in near-real-time to provide information that can help mitigate the societal impact of earthquakes. The NEIC commonly relies on teleseismic observations to constrain earthquake source parameters (e.g., location, depth, magnitude, and mechanism) due to a lack of local and regional observations. For these ‘teleseismic’ events, depth phase (i.e., pP , sP ) arrival time observations provide the best estimate on source depth. However, depth phases are often difficult to accurately identify and/or pick. Therefore, NEIC relies on waveform modeling, such as those determined from W-phase ( M ww ), body wave ( M wb ), and regional ( M wr ) moment tensor estimations, to provide constraints on source depth. While depth estimates from these approaches are informative, higher frequency observations provide more precise estimates because depth phases are more prominently observed at higher frequencies. Here, we present NEIC’s relatively high-frequency (~0.04 to 1 Hz) teleseismic waveform modeling approach, termed Synthetic Depth Phase Modeling (SynDepth), for determining source depth. SynDepth was developed to provide NEIC with a tool that enables rapid, accurate, and quantifiable estimates of earthquake source depth in cases where locator depths are not reliable. This relatively simple and fast procedure searches over 1 km-incremented source depths and an expanding triangular source-time function to find the best-fitting solution. We compare automatic SynDepth solutions for a dataset of 1,216 earthquakes (M5.5-M7.6) between 2017 and 2021 to NEIC-derived depth estimates from other methods. Our approach provides a robust depth estimate for earthquakes lacking local arrival time data, and it minimizes the need for analyst review of depth-phase picks ( pP , sP ) or using predefined ‘fixed’ depths.

Seismological Research Letters↗
USGS2026

Surface rupture and slip distribution of the 2025 Mw7.7 Mandalay earthquake and updated length scaling of supershear earthquakes

The 2025 M w 7.7 Mandalay, Burma (Myanmar), earthquake ruptured 475 km of the central Sagaing fault and is the longest continental strike-slip rupture on record. The observed rupture length is 1.6–4.7 times the value expected (100–300 km) from existing length-magnitude scaling relations for strike-slip earthquakes. The earthquake resulted from shallow dextral faulting and ruptured bilaterally with supershear speeds south of the epicenter, rupturing close to three major cities in Myanmar and exposing over six million people to violent or extreme shaking. We report on the surface rupture character, length, and slip distribution based on sub-pixel correlation of Sentinel-2 (10 m) and Planet Dove (3 m) optical images and visual analysis of SkySat and WorldView (0.3–0.5 m) optical images. The earthquake had moderate surface slip (average = 3.3 m, maximum = 5.6 m, 25–75% range = 3.0–4.0 m), narrow deformation zone width (1–10 pixels in sub-pixel correlation and up to 190 meters for the detailed surface rupture mapping), and simple fault geometry (no stepovers or large changes in strike, 87% of the rupture that was mapped in detail is single-stranded). We attribute the extreme length of the Mandalay earthquake to supershear rupture speed, simple fault geometry, narrow down-dip width, and moderate surface slip. Based on a compilation of 25 supershear strike-slip earthquakes ( M w 6.5–8.6; 1979–2025), we find that the rupture length of supershear earthquakes does not fit empirical scaling relationships for strike-slip earthquakes that predict length from magnitude. A length-magnitude scaling relationship based on supershear earthquakes has a best fit of log 10 (surface rupture length) = 0.89 M w – 4.44, indicating that supershear earthquakes tend to be longer than their subshear counterparts for any given magnitude and thus may expose a greater population to shaking.

Mandalay↗
USGS2026

Preface to the focus section on intraplate earthquakes

More than a half century after plate tectonics provided an overarching framework to explain earthquakes along active plate boundaries, numerous theories have been proposed to explain where, why, and how often earthquakes occur well away from active plate boundaries, but a paradigm remains elusive. Even the classification of earthquakes away from active plate boundaries as "intraplate" raises issues, with potentially important distinctions between Stable Continental Regions and more actively deforming regions including passive margins and failed rifts. Some of the largest known intraplate earthquakes themselves remain enigmatic, having occurred before the modern instrumental era. Hazard assessments are often data-limited: low fault-slip rates relative to landscape modification rates result in poor discoverability of fault sources, challenging the characterization of source zones and earthquake recurrence; the completeness and homogenization of instrumental earthquake catalogs using uncertain magnitude conversions can lead to uncertainties in earthquake recurrence; and, limited strong-motion observations for large-magnitude events at near-source distances leads to uncertainties in the selection and development of ground-motion models for seismic hazard studies. Data from recent intraplate earthquakes around the world—from the moment magnitude M 7.7 2001 Bhuj, India, earthquake 25 years ago to the 2024 M 4.8 Tewksbury, New Jersey earthquake—have yielded both new insights and new questions. The papers in this special focus discuss many of the long-standing challenges involved with intraplate earthquake investigations and provide a snapshot of the state of the art with current research to advance our understanding.

Seismological Research Letters↗
USGS2025

Submarine avalanche deposits hold clues to past earthquakes

Earthquakes and other natural events sometimes shake the seafloor near coastlines severely enough to cause underwater avalanches that rush down steep slopes, scouring the seabed and carrying sediment to greater depths. These fast-moving sediment-laden flows, called turbidity currents , have at times damaged underwater infrastructure like pipelines and communications cables, as they did, for example, in snapping transatlantic cables off the coast of Newfoundland after the 1929 Grand Banks earthquake.

EOS Transactions↗
USGS2026

ShakeAlert Earthquake Early Warning System performance during the Mw 7.0 offshore Cape Mendocino earthquake

The 5 December 2024 M w 7.0 Offshore Cape Mendocino earthquake was a challenging test of the U.S. West Coast ShakeAlert earthquake early warning system due to its offshore epicenter and limited near‐source station coverage. We analyzed real‐time performance of all components of the ShakeAlert system, including the seismic algorithms (earthquake point‐source integrated code [EPIC] and Finite‐fault rupture Detector [FinDer]), the geodetic algorithm (Geodetic First Approximation of Size and Time–peak ground displacement [GFAST‐PGD]), and network telemetry during the event. EPIC created the first solution for this earthquake 15 s after origin time with an initial magnitude estimate of M 5.6 and location error of 10 km from the Advanced National Seismic System epicenter. An early spurious trigger from station CE.89101 fortuitously maintained location accuracy and, correspondingly, magnitude accuracy. FinDer contributed its first solution at 18 s with a location estimate closer to the seismic network and produced two distinct rupture geometries, leading to minor fluctuations in estimated intensity contours. GFAST‐PGD did not meet alerting thresholds but otherwise performed as expected. Network latencies were <2 s for most stations, supporting the rapid detection of this earthquake by the system. Roughly five million alerts were delivered to cell phone devices in California and Oregon during this event. This was also the first instance of a school district‐wide ShakeAlert‐powered system being activated. Comparisons to recorded seismograms demonstrate that the maximum warning times before potentially damaging shaking (intensity 6+) were in the range of 5–55 s. Although the ShakeAlert system provided accurate solutions and useful alert delivery, this earthquake raised awareness of potential issues within the system, including the need for improved offshore location estimates, a combination of solutions from ShakeAlert servers, and handling of spurious triggers.

California↗
USGS2025

Strong shaking from past Cascadia Subduction Zone earthquakes encoded in coastal landforms

Strong earthquakes along subduction zones are often devastating events, but sparse records along some tectonic margins limit our understanding of seismic hazards. Constraining shaking intensities is critical, especially in subduction zones with infrequent but large-magnitude earthquakes like the Cascadia Subduction Zone (CSZ), where the lack of recorded ground motions has led to uncertainty in the severity and potential impacts of future earthquakes. Here we fill this observational gap with a novel inventory of quantitative estimates of past shaking intensities from geotechnical modeling of coastal landforms. One hundred fifty-four deep-seated landslides and 65 fragile geologic features constrain minimum and maximum peak ground accelerations, respectively. These estimates are broadly consistent with model predictions of M9 ruptures, suggesting strong shaking of 0.4–0.8 g during past CSZ earthquakes. Local discrepancies between our geologic shaking constraints and earthquake simulations may inform past rupture behavior, leading to better predictions of shaking intensity for future earthquakes.

California, Oregon, Washington↗
USGS2025

Preface to the focus section on earthquake-induced ground deformation

Ground failure due to earthquake-induced liquefaction, surface fault rupture, and landsliding has caused substantial damage in the past and continues to pose risks to critical infrastructure in the future. The consideration of ground failure is central to engineering analysis and design, ranging from site-specific engineering assessments of ground failure potential to broader regional-scale ground failure assessments of near-real-time earthquake impacts or longer-term portfolio risk. Uncertainties in all aspects of the problem complicate the prediction of earthquake-induced ground failure, including the identification of hazard-susceptible geomaterials, characterizing their spatial extent and physical properties, spatio-temporal variability in groundwater conditions, characterization of earthquake ground motions, assessing ground failure severity, and linking ground failure severity to infrastructure damage and loss.

Seismological Research Letters↗
USGS2024

The SCEC/USGS community stress drop validation study using the 2019 Ridgecrest earthquake sequence

We introduce a community stress drop validation study using the 2019 Ridgecrest, California, earthquake sequence, in which researchers are invited to use a common dataset to independently estimate comparable measurements using a variety of methods. Stress drop is the change in average shear stress on a fault during earthquake rupture, and as such is a key parameter in many ground motion, rupture simulation, and source physics problems in earthquake science. Spectral stress drop is commonly estimated by fitting the shape of the radiated energy spectrum, yet estimates for an individual earthquake made by different studies can vary hugely. In this community study, sponsored jointly by the U. S. Geological Survey and Southern/Statewide California Earthquake Center, we seek to understand the sources of variability and uncertainty in earthquake stress drop through quantitative comparison of submitted stress drops. The publicly available dataset consists of nearly 13,000 earthquakes of M1 to 7 from two weeks of the 2019 Ridgecrest sequence recorded on stations within 1-degree. As a community study, findings are shared through workshops and meetings and all are invited to join at any time, at any interest level.

Seismica↗
USGS2024

The 17 January 1994 Northridge, California, earthquake: A retrospective analysis

The 17 January 1994 Northridge, California, earthquake was a watershed event, with far-reaching societal and scientific impacts. The earthquake, which occurred in the early days of both broadband seismic networks and the Internet, spurred advances in seismic monitoring, real-time systems, and development of data products. Motivated by the 30th anniversary of the earthquake, we present a brief retrospective of the earthquake and its impact, and reconsider both ground motions and the aftershock distribution using modern tools and best-available data. With improvements in instrumentation and analysis methodology, recent earthquakes continue to reveal increasing complexity of ground motions, fault systems, and earthquake ruptures. Even in the absence of data from state-of-the art instrumentation, a retrospective consideration of ground motion data from the Northridge earthquake reveals complexities beyond what could be characterized (and modeled) thirty years ago. Aftershock relocations for both the 1971 Sylmar and 1994 Northridge earthquakes also reveal an updated view of fault complexity. Our study does provide a cautionary tale regarding legacy data sets and research results that are not easily accessible, which can result in discrepancies between catalog data and products from best-available science. We also briefly describe outreach products produced as part of the anniversary commemoration.

California↗
USGS2025

Reflections on a trio of North American earthquakes in 1925

In 1925, three moderately large damaging earthquakes occurred in North America over four months: the 28 February (local time; LT) M 6.2 Charlevoix, 27 June (LT) M 6.6 Montana, and 29 June M 6.5 Santa Barbara earthquakes. The centennial anniversaries of these events motivated this retrospective consideration focused on the ground motions generated by the three events, including a reconsideration of early intensity assignments for the Montana earthquake. At the time, these three earthquakes appeared to support the arguments of some geologists who downplayed the severity of seismic hazard in southern California relative to other parts of the country. Some of the arguments advanced at that time, for example that Los Angeles “has the least to fear from ‘Acts of God’ of any city under the American flag,” ( Hill, 1928 ) sound naïve if not laughable now, but a comparison of well‐constrained shaking distributions for the three earthquakes reveals the dramatic difference in wave propagation efficiency in western versus eastern North America (ENAM), which leads to moderate ENAM events being felt to much larger distances. At M 6.2, the 1925 Charlevoix earthquake was a notably large event in ENAM. This earthquake was the largest event in eastern Canada since 1870 and caused damage in the epicentral region in addition to towns as far away as 200 km, with felt shaking extending over 1000 km. In contrast, felt shaking from the Santa Barbara earthquake barely extended beyond ∼200 km. Compiling published intensity distributions for larger ENAM earthquakes, we show that perceptible earthquake shaking is not uncommon in ENAM over century time scales, but experience with weakly felt shaking may incline people to downplay potential earthquake risk.

California, Montana, Quebec↗
USGS2025

Simulating human behavior under earthquake early warning

Earthquakes are a rapid-onset hazard where advance planning and learning plays a key role in mitigating injuries and death to individuals. Recent advances in earthquake detection have resulted in the development of earthquake early warning (EEW) systems. These systems can provide advance warning to predetermined geographic regions that an earthquake is in progress, which may result in individuals receiving warning seconds before significant shaking is felt at their location. This additional time could allow individuals to take more effective protective actions during the immediate disaster. To demonstrate this, we created an agent-based simulation of a basic apartment that allowed us to randomly and repeatedly simulate an individual receiving and responding to an EEW message. The results of our preliminary simulation show that, in our study environment, earthquake early warning alerts have the potential to allow for sufficient time for individuals to take protective actions.

Washington↗
USGS2026

Wavelet Inversion for SliP (WISP): Open-source earthquake slip modeling software

Models of the spatiotemporal evolution of earthquake slip, termed finite-fault models, are a critical component of rapid earthquake and tsunami response, earthquake forecasting, seismic ground-motion estimates, and studies of earthquake kinematics. Here, we detail a newly released finite-fault modeling software, Wavelet Inversion for SliP (WISP), in use at the U.S. Geological Survey’s National Earthquake Information Center (NEIC) and available to the public. WISP version 1.1.0 allows inversion of teleseismic body and surface waves, as well as local strong-motion, static and dynamic Global Navigation Satellite System, and satellite imagery (e.g., Interferometric Synthetic Aperture Radar) observations on single or multiple planar fault segments. The software is used in NEIC rapid response of earthquakes M w ≥ 7, generally resulting in a published model within the first few hours after the event origin time. The rupture location and dimensions are then used as inputs to downstream products to estimate earthquake shaking, predict loss, and model the likelihood of secondary hazards, namely landslides and liquefaction. WISP is also used in research studies to evaluate the characteristics of complex ruptures including multifault ruptures and earthquake doublets, among others. The WISP version 1.1.0 software release is composed of Python-wrapped FORTRAN code to accomplish the inversion procedure. A simple command line interface facilitates ease of use even for those with only a cursory knowledge of Python scripting. WISP version 1.1.0 includes a Jupyter Notebook tutorial demonstrating use of the software for modeling the 2015 M w 8.3 Illapel, Chile, earthquake. In parallel with the tutorial, we demonstrate the typical usage of the WISP software using the M w 8.3 Illapel earthquake example here.

Seismological Research Letters↗
USGS2025

Long-term dynamics of earthquake swarms in the Yellowstone caldera

The factors controlling the spatial distribution and temporal evolution of earthquake swarms in volcanic systems remain unclear. We leverage leading-edge deep learning algorithms and a detailed three-dimensional velocity model to construct a 15-year high-resolution earthquake catalog of the Yellowstone caldera region. More than half of the region’s earthquakes are clustered into swarm-like families characterized by episodes of hypocenter expansion and migration. Adjacent earthquake swarms, separated by long quiescent periods, are found to be a dominant feature. We suggest that these swarms are controlled by the interplay between slowly diffusing aqueous fluids and rapid episodic fluid injections, which may result from the breaking of permeability seals. Our analyses also indicate that clustered seismicity beneath the caldera occurs on relatively immature, rougher fault structures, compared to more planar faults outside. Our results provide additional context for understanding seismicity in hydrothermal systems, highlighting the key role played by long-term fluid diffusion processes in driving the occurrence of earthquake swarms.

Idaho, Montana, Wyoming↗
USGS2025

Unveiling coseismic deformation from differenced legacy aerial photography and modern lidar topography: The 1983 M6.9 Borah Peak earthquake, Idaho, USA

The 1983 M6.9 Borah Peak, Idaho, earthquake is one of the largest historical normal fault earthquakes in the western United States. We quantified meter-scale vertical change along the 35 km-long rupture using topographic differencing of 1966 aerial imagery and 2019 lidar-derived data. The initial differencing results are largely obscured by horizontal and vertical georeferencing errors and flight-line stripes. Our error corrections are designed to be insensitive to the coseismic deformation and reduced error by 50%. We calculated vertical separation and resolved a maximum of 2.02 ± 0.46 m at Doublespring Pass. Our vertical separation measurements are generally consistent with those from prior studies using field data and post-earthquake topographic data. However, the differencing measurements are a few decimeters lower than these prior measurements, indicating that differencing can isolate historical from prehistoric earthquake deformation. Our study demonstrates that revisiting historical earthquakes can provide new insights into the magnitude and patterns of coseismic deformation.

Idaho↗
USGS2023

3D Dynamic rupture modeling of the 6 February 2023, Kahramanmaraş, Turkey Mw 7.8 and 7.7 earthquake doublet using early observations

The 2023 Turkey earthquake sequence involved unexpected ruptures across numerous fault segments. We present 3D dynamic rupture simulations to illuminate the complex dynamics of the earthquake doublet. Our models are constrained by observations available within days of the sequence and deliver timely, mechanically consistent explanations of the unforeseen rupture paths, diverse rupture speeds, multiple slip episodes, heterogeneous fault offsets, locally strong shaking, and fault system interactions. Our simulations link both earthquakes, matching geodetic and seismic observations and reconciling regional seismotectonics, rupture dynamics, and ground motions of a fault system represented by 10 curved dipping segments and embedded in a heterogeneous stress field. The M w 7.8 earthquake features delayed backward branching from a steeply branching splay fault, not requiring supershear speeds. The asymmetrical dynamics of the distinct, bilateral M w 7.7 earthquake are explained by heterogeneous fault strength, prestress orientation, fracture energy, and static stress changes from the previous earthquake. Our models explain the northward deviation of its eastern rupture and the minimal slip observed on the Sürgü fault. 3D dynamic rupture scenarios can elucidate unexpected observations shortly after major earthquakes, providing timely insights for data‐driven analysis and hazard assessment toward a comprehensive, physically consistent understanding of the mechanics of multifault systems.

The Seismic Record↗