Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “One Ecosystem”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,216 records · Page 12Linked to original sources
USGS2024

Potential climate and human water-use effects on water-quality trends in a semiarid, western U.S. watershed: Fountain Creek, Colorado, USA

Nutrients, total dissolved solids (TDS), and trace elements affect the suitability of water for human and natural needs. Here, trends in such water-quality constituents are analyzed for 1999–2022 for eight nested monitoring sites in the 24,000 km 2 Fountain Creek watershed in Colorado, USA, by using the weighted regressions on time, discharge, and season (WRTDS) methodology. Fountain Creek shares characteristics with other western U.S. watersheds: (1) an expanding but more water-efficient population, (2) a heavy reliance on imported water, (3) a semiarid climate trending towards warmer and drier conditions, and (4) shifts of water from agricultural to municipal uses. The WRTDS analysis found both upward and downward trends in the concentrations of nutrients that reflected possible shifts in effluent management, instream uptake, and water conservation by a watershed population that grew by about 40%. Selenium, other trace elements, and TDS can pose water-quality challenges downstream and their concentrations were found to have a downwards trend. Those trends could be driven by either a warming and drying of the local climate or decreased agricultural irrigation, as both would reduce recharge and subsequent mobilization from natural geologic sources via groundwater discharge. The patterns illustrate how changes in climate and water use may have affected water quality in Fountain Creek and demonstrate the patterns to look for in other western watersheds.

Colorado↗
USGS2025

New constraints on location and timing of the Great Lakes tectonic zone, central Upper Peninsula, Michigan, USA

The Great Lakes tectonic zone (GLTZ) forms the boundary between the Wawa–Abitibi and Minnesota River Valley subprovinces within the Archean Superior Province. The GLTZ is concealed for all of its 1100 km length, except for a segment in the central Upper Peninsula of Michigan. There, it is exposed as a northwest-striking mylonite zone along a 11 km segment, extending to the onlap of Paleozoic rocks to the east. Farther east, its location has been unknown. Here, we use aeromagnetic and gravity data to develop interpretations of the expression of the GLTZ and to define its extent under cover. Aeromagnetic gradients over the mylonite zone are interpreted to be produced by structurally juxtaposed rocks with varying magnetizations. Gravity data show a regional gradient along the GLTZ, produced by the juxtaposition of a dense greenstone belt on the north against lower-density gneisses and granites on the south. The GLTZ is interpreted to extend ∼55 km under cover to the east. The GLTZ is terminated on the east by the buried eastern arm of the ca. 1100 Ma Midcontinent Rift. An undeformed granitic dike that cuts the mylonitic foliation produces a U–Pb apatite age of 2523 ± 33 Ma, implying no major post-Archean shearing occurred, and is at odds with previous interpretations of major Proterozoic reactivation. A granite intrusion in the Minnesota River Valley subprovince produces a Pb–Pb zircon age of 2606.9 ± 3.6/7.4 Ma. This suggests that magmatism related to the Sacred Heart orogeny, previously known in Minnesota, extended to Michigan.

Michigan↗
USGS2025

Examining the role of elevated and sustained strain in dynamically triggering earthquakes on the Anza section of the San Jacinto fault

Microearthquakes can be dynamically triggered in southern California by remote earthquakes. However, directly connecting dynamic triggering mechanisms with observational data remains challenging. One proposed failure mechanism suggests that both the amplitude and duration of cyclic fatigue caused by the passing seismic wave contribute to triggering occurrence. Here, we measure dynamic strains recorded by borehole strainmeters in the Anza section of the San Jacinto fault zone from 710 earthquakes that occurred over 300 km away between 2008 and 2017 to systematically investigate the role of elevated and sustained strain in controlling dynamic triggering. We design a suite of tests to evaluate whether specific amplitude thresholds and durations of strain can predict dynamic triggering cases. We further test whether the peak dynamic strain (PDS) can predict triggering occurrence in combination with the strain amplitude and duration. Based on these tests, there is no strain amplitude–duration threshold that can distinguish triggering occurrence in Anza. Dynamic triggering is more likely to occur if a remote earthquake causes a PDS above 100 nanostrain, though many cases were triggered at smaller PDSs. The lack of clear correlation between triggering and characteristics of the dynamic strain field suggests that the tested features of the incoming waves do not determine triggering occurrence and local fault conditions and slip processes are more important in controlling dynamic triggering in Anza.

California↗
USGS2025

Simulation of the impacts of projected climate change on groundwater resources in the urban, semiarid Yucaipa Valley watershed, southern California using an integrated hydrologic model

Managing water resources in semiarid watersheds is challenging due to limited supply and uncertain future climate conditions. This paper examines the impact of future climate changes on an urban watershed in southern California using an integrated hydrologic model. GSFLOW modeling software is used to simulate the nonlinear relationships between climate trends and precipitation partitioning into ET, runoff, and subsurface storage. Four global circulation models (GCMs), each with two greenhouse-gas scenarios, RCP45 and RCP85 are used to project future climate conditions. GCMs include the CanESM2, CNRM-CM5, HadGEM2-ES, and MIROC5 models. The model's simulated hydrologic conditions are compared with historical data to assess changes in water budgets and groundwater supply. Results indicate decreased groundwater storage in most scenarios due to increased natural evapotranspiration, vegetation consumptive use, and streamflow out of the watershed. Only scenarios with substantially increased future precipitation show increased groundwater storage. The study also highlights increased future aridity despite the rise in precipitation and large precipitation events forecast by GCMs, which increase the risk of urban floods and decrease stream leakage and water available to vegetation.

California↗
USGS2025

Structural controls on splay fault rupture dynamics during Cascadia megathrust earthquakes

Great subduction earthquakes ( M w ≥ 8.0) can generate devastating tsunamis by rapidly displacing the seafloor and overlying water column. These potentially tsunamigenic seafloor offsets result from coseismic fault slip and deformation beneath or within the accretionary wedge. The mechanics of these shallow rupture phenomena and their dependence on subduction zone properties remain unresolved, partly due to the sparsity of offshore observations of shallow megathrust earthquake deformation. Here, we analyze how offshore structure influences shallow rupture mechanics and slip partitioning using 3D dynamic earthquake simulations of the Cascadia subduction zone (CSZ) megathrust with and without variably dipping seaward- or landward-vergent splay faults in the wedge that sole into the megathrust. Resulting tradeoffs between splay and megathrust slip reveal structural controls on rupture partitioning, with greater splay slip leading to less shallow megathrust slip updip. Gently dipping and seaward-vergent splays host more slip than those with steeper, landward-vergent splays. To isolate the underlying mechanisms, we compare models with Andersonian and plunging principal stresses. Results suggest distinct static and dynamic processes control the dip- and vergence-dependence of splay rupture: static (mis)alignment relative to far-field tectonic loading favors slip on more optimally oriented, shallowly dipping splay faults. In contrast, dynamic stress interactions of an updip-propagating megathrust rupture front with the free surface and potential branch faults favor forward branching onto seaward-vergent splays and inhibit backward branching onto landward-vergent splays. Resulting seafloor displacements suggest splay fault structure may influence coseismic tsunami source processes, highlighting the importance of dynamically viable rupture scenarios in subduction hazard assessments.

Cascadia subduction zone↗
USGS2024

Perspectives on transportable array Alaska background noise levels

Background seismic noise fundamentally sets a lower bound on our ability to record signals arising from earthquakes. The background noise spectrum at a station is a combination of cultural noise, ocean-generated microseism noise, intrinsic instrument self-noise, and the sensitivity of the instrument to nonseismic noise sources. The USArray-Transportable Array Alaska deployed 195 stations across Alaska and parts of Canada (Yukon, British Columbia, and Northwest Territories). These stations were all installed using similar techniques and made use of instruments with similar self-noise levels. As such, this network provides an opportunity to look at how geographic location influences seismic background. Using these broadband stations, we report background noise levels from 0.2 to 75 s period in six discrete bands. By constructing “noise maps,” we depict both spatial and temporal changes in the background noise field. Using these maps, combined with targeted analysis, we infer sources and contributing factors to noise levels in these different period bands. These include cultural noise, the formation of sea ice, seasonal changes in permafrost and wave activity in the Gulf of Alaska, and magnetic field variability. We use this study as an opportunity to review several previous studies examining seismic noise in Arctic regions.

Book chapter↗
USGS2025

Evidence for nonlocal sediment transport on hillslopes from fault scarp morphology

Hillslope sediment transport processes such as bioturbation, rainsplash, and granular mechanics occur across the entire planet. Yet, it remains uncertain how these small-scale processes act together to shape landscapes. Longstanding hillslope diffusion theory posits that hillslope processes are spatially limited, whereas new concepts of nonlocal sediment transport argue otherwise. However, each theory produces subtly different, but distinct, predictions for the evolution of fault scarps. We use the topographic change of fault scarps to demonstrate that hillslope processes produce nonlocal sediment transport. Analysis of a global compilation of 340 dated single-earthquake scarp profiles reveals a statistically significant ( p < 0.05 ) relationship between scarp age and scarp asymmetry, here defined as the ratio of imaginary to real components of the Fourier transform of absolute slope. Numerical simulations show that nonlocal models predict this relationship, whereas hillslope diffusion models do not. To further investigate this result, we examined the depositional geometry of a well-exposed colluvial wedge along the Wasatch fault in central Utah, United States. Our quantitative comparison between the exposure and numerical simulations reveals better agreement with the nonlocal model. Nonlocal sediment transport theory appears to best capture the physics of how hillslope processes shape fault scarps, yet hillslope diffusion provides a useful approximation in many cases. As the processes that act on fault scarps are nearly identical to those acting on hillslopes, our results provide evidence supporting nonlocality as a generalized model of hillslope sediment transport.

Utah↗
USGS2026

The potential impact of three-dimensional distributed slip models derived from real-time GNSS data on the performance of the ShakeAlert earthquake early warning system for slab interface earthquakes

The ShakeAlert® earthquake early warning (EEW) system is designed to warn users of imminent strong ground motion with sufficient time to take protective actions. ShakeAlert currently uses three algorithms to characterize the earthquake source. One estimates the location and magnitude using the first few seconds of the P wave and, while fast, tends to underestimate magnitude for M w 7.0+ earthquakes. A second estimates the location, orientation, length, and corresponding magnitude of a line source using observed peak ground acceleration and contributes primarily to M w 5.5+ earthquakes. The third infers earthquake magnitude from peak ground displacement measured using Global Navigation Satellite System (GNSS) data and offers nonsaturating magnitudes for M w 7.0+ earthquakes. Other EEW algorithms exist that infer temporally evolving spatially variable slip on a 3D fault surface from real‐time GNSS data, information that might enable more accurate and timely alerts in the event of large‐magnitude subduction interface earthquakes. Here, we evaluate the potential contribution of one such algorithm, BEFORES ( Minson et al. , 2014 ), to improve ShakeAlert performance through a simulated real‐time implementation of Bayesian evidence‐based fault orientation and real‐time earthquake slip (BEFORES) and other ShakeAlert algorithms using data for eight M w 7.6+ earthquakes. The test results demonstrate that BEFORES can produce well‐constrained and accurate magnitude estimates as soon as or sooner than other EEW algorithms, in turn enabling it to increase the amount of warning time users receive in many cases. However, with a modified Mercalli intensity (MMI) threshold of 3.5, which is commonly used for issuing alerts, BEFORES would tend to alert large geographic regions that did not feel strong shaking (MMI 6+). This effect can be mitigated using a higher alert threshold of MMI 4.5 without negative impact on the amount of warning time obtainable with BEFORES.

Bulletin of the Seismological Society of America↗
USGS2024

Short-term sediment dispersal on a large retreating coastal river delta via 234Th and 7Be sediment geochronology: The Mississippi River Delta Front

Many Mississippi River Delta studies have shown recent declines in fluvial sediment load from the river and associated land loss. In contrast, recent sedimentary processes on the subaqueous delta are less documented. To help address this knowledge gap, multicores were collected offshore from the three main river outlets at water depths of 25–280 m in June 2017 just after the peak river discharge period, with locations selected based on 2017 U.S. Geological Survey seabed mapping. The coring locations included the undisturbed upper foreset, mudflow lobes, gullies, and the undisturbed prodelta. Nine multicores were analyzed for Beryllium-7 activity, and four cores were analyzed for excess Thorium-234 activity via gamma spectrometry, granulometry and X-radiography. Our results indicate a general trend of declining 7 Be and 234 Th activities and inventories with increasing distance from sources and in deeper water. The core X-radiographs are graded from the predominantly physically stratified nearshore to the more bioturbated offshore, consistent with the sedimentation patterns. Sediment focusing assessed via the 7 Be and 234 Th sediment inventories shows preferential sedimentation in gully and lobe environments, whereas the upper foreset and prodelta focusing factors are relatively depleted. Overall, short-term sediment deposition from the main fluvial source remains active offshore from all three major river outlets, despite the overall declining river load.

Louisiana↗
USGS2025

Road salt collection and redistribution at an urban rain garden on sandy soil, Gary, Indiana

Rain gardens installed as green infrastructure to divert storm runoff from entering combined sewers also collect dissolved constituents and particulates. An urban rain garden in northwestern Indiana, USA, was continuously monitored from November 2019 to May 2021 to evaluate the fate of dissolved constituents entering the rain garden in runoff. Physical and chemical properties of soils in the rain garden were also monitored, along with underlying groundwater. Linear regression models relating specific conductance to chloride concentration indicated that the 0.0371-ha (3998 square feet) rain garden collected approximately 1490 kg (3285 pounds) of road salt from the surrounding 0.2228 ha (24,500 square feet) of impervious surfaces. Soils and groundwater were seasonally affected by road salt application but carryover from year to year was not indicated. Rain garden soil permeability (5.20 × 10 −5 to 9.72 × 10 −5 m/s) remained unchanged during the study period and soil organic carbon generally increased under native vegetation. The results suggest that a rain garden built on sandy soil can divert substantial quantities of runoff and dissolved constituents from combined sewers; however, chloride is transported to sub-infrastructure groundwater that eventually discharges to adjacent waterways with concentrations lower than those observed in runoff.

Indiana↗
USGS2026

Controls on natural hydrogen generation during serpentinization of mantle rocks

Mantle rocks undergoing serpentinization can generate significant amounts of natural hydrogen, yet the rates and controlling processes remain poorly understood. Here, we constrain the possible hydrogen generation rates in two distinct mantle rock types, the fertile lherzolites of the Western Pyrenees and the depleted harzburgites of Northern California, to relatively low rates of ~0.1 to ~0.5 tonnes H₂ yr⁻¹ km⁻³ of reactive rock. When integrated over the full reactive volumes, this corresponds to total production rates of ~300 to ~600 tonnes H₂ yr⁻¹. By combining three-dimensional geophysical inversion with numerical modelling of fluid-rock processes, we show that hydrogen generation rates are mainly limited by H₂ saturation in the fluid and reaction kinetics. Under these constraints, hydrogen generation in mantle-derived serpentinization systems proceeds slowly, making rapid large-scale replenishment unlikely and suggesting that large, economically relevant accumulations, would require timescales of thousands to tens of thousands of years to develop.

northern California, western Pyrenees↗
USGS2026

On-demand global Landsat evapotranspiration product: Development, evaluation, and dissemination

Global actual evapotranspiration (ET) is one of the essential climate variables needed to understand and manage the relationships among food, energy, and water resources. The U.S. Geological Survey Earth Resources Observation and Science (EROS) Center launched a provisional ET product in 2020, offering on-demand, field-scale global coverage derived from Landsat data through the EROS Science Processing Architecture (ESPA) platform. The ESPA interface provides ET data for cloud-free Landsat overpasses starting in 1982 with Landsat 4 through the current Landsat 9. The ET data are delivered as a Provisional Level-3 Science product created using the Operational Simplified Surface Energy Balance (SSEBop) model. Landsat surface temperature and reference ET are the main model drivers along with vegetation index and net radiation for model parameterization. A large volume of Landsat-based ET orders (e.g., over 1,200,000 images from June 2020 through December 2025) around the world indicate increasing awareness and application of the ET data. The ESPA platform enables land and water resource managers and researchers to access a first-order ET product without requiring advanced knowledge of remote sensing technology or evapotranspiration modeling. We present the methodology and workflow of the on-demand Landsat ET product and its performance evaluations over diverse hydro-climatic settings. The product can help estimate field-scale consumptive water use and thus quickly and consistently assess historical water use, allocation, and budget to inform water management under changing environments. Future ET data aggregated to monthly and seasonal time scales are expected to enhance integration with decision-making tools and procedures.

Remote Sensing of Environment↗
USGS2024

The impact of source time function complexity on stress drop estimates

Earthquake stress drop—a key parameter for describing the energetics of earthquake rupture—can be estimated in several different, but theoretically equivalent, ways. However, independent estimates for the same earthquakes sometimes differ significantly. We find that earthquake source complexity plays a significant role in why theoretically (for simple rupture models) equivalent methods produce different estimates. We apply time‐ and frequency‐domain methods to estimate stress drops for real earthquakes in the SCARDEC (Seismic source ChAracteristics Retrieved from DEConvolving teleseismic body waves, Vallée and Douet, 2016 ) source time function (STF) database and analyze how rupture complexity drives stress‐drop estimate discrepancies. Specifically, we identify two complexity metrics—Brune relative energy (BRE) and spectral decay—that parameterize an earthquake’s complexity relative to the standard Brune model and strongly correlate with the estimate discrepancies. We find that the observed systematic magnitude–stress‐drop trends may reflect underlying changes in STF complexity, not necessarily trends in actual stress drop. Both the decay and BRE parameters vary systematically with magnitude, but whether this magnitude–complexity relationship is real remains unresolved.

Bulletin of the Seismological Society of America↗
USGS2026

Linking distribution and return-on-investment models to optimize woody management for prairie grouse in Nebraska

Grasslands in Nebraska, USA, face threats from agricultural conversion, urban development, and woody encroachment, all of which negatively affect prairie grouse ( Tympanuchus spp.) populations. To optimize conservation planning, Nebraska wildlife agencies developed probabilistic area-based surveys for greater prairie-chicken ( T. cupido ) and sharp-tailed grouse ( T. phasianellus ) to sample landscapes across a range of environmental conditions. This design improves historical surveys and enables the development of distribution models that quantitatively define habitat associations and support scenario-based conservation planning. Using survey data collected during 2020–2022, we modeled prairie grouse occurrence and abundance as functions of land cover, topography, and climate using Bayesian logistic and zero-inflated negative binomial models with regularized horseshoe priors. We then conducted a maximum potential return-on-investment analysis of woody cover treatments, assuming sustained treatment success, relative to projected impacts of woody encroachment on prairie grouse populations by 2050. Among modeled associations were a positive association with grasslands having low woody cover and a negative association with grasslands having high woody cover. Across the 3-year period, median estimated annual populations were 142,380 for greater prairie-chicken (range of 95% CIs across years = 68,821–277,615) and 64,154 for sharp-tailed grouse (range of 95% CIs across years = 27,550–146,559). Under projected woody encroachment, mean predicted population declines were 10% for greater prairie-chicken (range of 95% CIs = 7–14%) and 6% for sharp-tailed grouse (range of 95% CIs = 5–7%). Areas with high prairie grouse density and low treatment costs in 2021, and high projected woody encroachment and population loss by 2050, offered the greatest return on investment for woody management. Return on investment was greatest in the northwestern Shortgrass Prairie ecoregion (northwestern Nebraska) for sharp-tailed grouse and the eastern Sandhills ecoregion (central Nebraska) for both species. These models underscore the value of evidence-based, quantitative approaches for prioritizing conservation actions on working lands. Scenario-based modeling could be extended to guide other treatments, such as optimizing restoration (e.g., Conservation Reserve Program) or incentivizing grassland persistence in areas with predicted climate resilience.

Nebraska↗
USGS1999

Effects of snowmobile use on snowpack chemistry in Yellowstone National Park, 1998

Snowmobile use in Yellowstone National Park has increased substantially in the past three decades. In areas of greatest snowmobile use, elevated levels of by-products of gasoline combustion such as ammonium and benzene have been detected in snowpack samples. Annual snowpacks and snow-covered roadways trap deposition from local and regional atmospheric emissions. Snowpack samples representing most of the winter precipitation were collected at about the time of maximum annual snow accumulation at a variety of locations in the park to observe effects of a range of snowmobile traffic levels. Concentrations of organic and inorganic compounds in snow samples from pairs of sites located directly in and off snow-packed roadways used by snowmobiles were compared to concentrations in samples collected at nearby off-road sites. Concentrations of ammonium were 2 to 5 times higher for the in-road snow compared to off-road snow for each pair of sites. Thus, concentrations decreased rapidly with distance from roadways. In addition, concentrations of ammonium, nitrate, sulfate, benzene, and toluene in snow were positively correlated with snowmobile use.

Wyoming↗
USGS2026

Simulation of the impacts of spring diversions on streamflow in the Strawberry Creek watershed, San Bernardino County, California, using an integrated hydrological model

The Strawberry Creek watershed, in the San Bernardino Mountains of southern California, features a group of natural springs known as Arrowhead Springs that have been augmented with diversions in the form of sub-horizontal borings and tunnels. Understanding the effects of these structures on streamflow through groundwater capture is crucial for managing surface-water resources in this watershed. In this study, we constructed the Strawberry Creek integrated hydrological model to increase this understanding. The Strawberry Creek integrated hydrological model is an integrated surface runoff and groundwater model, GSFLOW to simulate surface runoff and infiltration and groundwater flow. The model has 263 rows and 176 columns in each of its three layers. The model area includes the Strawberry Creek and four adjacent watersheds. The precipitation-runoff modeling system was calibrated using two streamflow gaging stations, and the groundwater and surface-water flow model was calibrated to the reported spring diversion discharge and a sparse number of groundwater-level measurements. The Strawberry Creek integrated hydrological model was run with and without diversions active, and simulated streamflow was compared, indicating that in the headwaters of Strawberry Creek, about 35 percent of the diversion flow was captured from base flow.

California↗
USGS2025

Rebuilding a volcano one lava flow at a time—Visualizing the lava dome-building eruption in the crater of Mount St. Helens, 1982–1986

Between 1980 and 1986, the U.S. Geological Survey made a series of 1:2,000-scale topographic contour maps from aerial photographic surveys to monitor the eruption. These maps were made for operational purposes and were not intended for publication. Since then, advances in technology made it possible to digitize the original, highly detailed hardcopy maps and derive new digital data elevation models of the surface of the lava dome. These digital elevation models allow for the visualization of the progression of the eruption and reveal the rubbly, chaotic surface of the lava flows and dome. Additionally, these new data help fill gaps in the long-term record of topographic changes that have occurred at the volcano since the May 18, 1980, eruption.

Washington↗
USGS2024

Simulated effects of projected 2014–40 withdrawals on groundwater flow and water levels in the New Jersey Coastal Plain

Abstract Groundwater flow between 2014 through 2040 was simulated in the New Jersey Coastal Plain based on three withdrawal scenarios. Two of the scenarios were based on projected population trends and the assumption of water conservation; the nominal water-loss scenario projected a status quo in the efficiency of water loss in the delivery systems whereas the optimal water-loss scenario projected a better water-loss efficiency resulting in less withdrawals. The third scenario assumes that all wells will withdraw water at their full allocation level which is generally much more than reported withdrawals in 2013 or projected under the other two scenarios. Maps and summaries of heads and drawdowns are presented for nine confined aquifers. All the aquifers have areas with heads below sea level by 2040. Of the three scenarios, the drawdowns are most extreme in the full allocation scenarios; there are large areas of head decline greater than 20 feet in 5 of the 9 confined aquifers. The exceptions are the Vincentown aquifer, despite some areas of large drawdown in the vicinity of wells, and the three Potomac-Raritan-Magothy (PRM) aquifers where withdrawals are regulated by Critical Area restrictions. The nominal and optimal water-loss scenarios have some areas of head declines; most are less than 15 feet. The simulation of these scenarios shows some extensive areas of head recovery as well—especially in the aquifers that are regulated by the Critical Area restrictions. Budgets of inflow and outflow components were calculated for 44 hydrologic budget areas (HBAs). The budget analysis shows that the water movement is complex and varies based on the aquifer geometry and location of pumping wells. Flow components between the unconfined and confined parts of the system were summarized by HUC11 (hydrologic unit code 11) basins.

New Jersey↗