Geology ReportsSearch

SEARCH · Geology Reports

Results for “Natural Resources Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

837 records · Page 12Linked to original sources

Rainfall intensification amplifies exposure of American Southwest to conditions that trigger postfire debris flows

Short-duration, high-intensity rainfall can initiate deadly and destructive debris flows after wildfire. Methods to estimate the conditions that can trigger debris flows exist and guidance to determine how often those thresholds will be exceeded under the present climate are available. However, the limited spatiotemporal resolution of climate models has hampered efforts to characterize how rainfall intensification driven by global warming may affect debris-flow hazards. We use novel, dynamically downscaled (3.75-km), convection-permitting simulations of short-duration (15-min) rainfall to evaluate threshold exceedance for late 21st-century climate scenarios in the American Southwest. We observe significant increases in the frequency and magnitude of exceedances for regions dominated by cool- and warm-season rainfall. We also observe an increased frequency of exceedance in regions where postfire debris flows have not been documented, and communities are unaccustomed to the hazard. Our findings can inform planning efforts to increase resiliency to debris flows under a changing climate.

Arizona, California, Nevada, New Mexico, Utah

On-demand global Landsat evapotranspiration product: Development, evaluation, and dissemination

Global actual evapotranspiration (ET) is one of the essential climate variables needed to understand and manage the relationships among food, energy, and water resources. The U.S. Geological Survey Earth Resources Observation and Science (EROS) Center launched a provisional ET product in 2020, offering on-demand, field-scale global coverage derived from Landsat data through the EROS Science Processing Architecture (ESPA) platform. The ESPA interface provides ET data for cloud-free Landsat overpasses starting in 1982 with Landsat 4 through the current Landsat 9. The ET data are delivered as a Provisional Level-3 Science product created using the Operational Simplified Surface Energy Balance (SSEBop) model. Landsat surface temperature and reference ET are the main model drivers along with vegetation index and net radiation for model parameterization. A large volume of Landsat-based ET orders (e.g., over 1,200,000 images from June 2020 through December 2025) around the world indicate increasing awareness and application of the ET data. The ESPA platform enables land and water resource managers and researchers to access a first-order ET product without requiring advanced knowledge of remote sensing technology or evapotranspiration modeling. We present the methodology and workflow of the on-demand Landsat ET product and its performance evaluations over diverse hydro-climatic settings. The product can help estimate field-scale consumptive water use and thus quickly and consistently assess historical water use, allocation, and budget to inform water management under changing environments. Future ET data aggregated to monthly and seasonal time scales are expected to enhance integration with decision-making tools and procedures.

Remote Sensing of Environment

A multidisciplinary approach that considers occurrence, geochemistry, bioavailability, and toxicity to prioritize critical minerals for environmental research

Critical minerals (or critical elements) are minerals or elements that are essential to global security and development and have supply chains vulnerable to disruption. In general, knowledge of the environmental behavior and health effects of critical elements is needed to support the development of safe and environmentally responsible supplies. This knowledge includes identifying potential consequences of increased critical element production and use, alternative critical element sources such as mine wastes, and adverse effects of critical elements on ecosystem condition and organismal health. Here we identify significant data gaps in the understanding of critical elements in surficial and aquatic environments, and the need, given the large number of commodities (50) identified on the 2022 critical minerals list for the United States, for an approach to prioritize them for study of their environmental fate and effects. We propose a multidisciplinary approach for this prioritization, considering measures of occurrence, geochemistry, bioavailability, and toxicity. We describe relatively easy-to-obtain metrics for each of these topic areas and demonstrate the utility of this integrated prioritization approach using indium and zinc as examples. This approach facilitates prioritizing research with a focus on those critical elements that are most mobile in the environment, bioavailable, toxic, or simply lacking data in these categories.

Environmental Science & Technology

Arctic speleothems reveal nearly permafrost-free Northern Hemisphere in the Late Miocene

Arctic warming is happening at nearly four times the global average rate. Long-term trends of permafrost dynamics cannot be estimated directly from monitoring of present-day thaw processes, requiring paleoclimate-proxy information. Here we use cave carbonates (speleothems) from a northern Siberian cave to determine when the Northern Hemisphere was mostly permafrost-free. At present, thick continuous permafrost in this region prevents speleothem growth. In a series of partially eroded caves, speleothems grew during the late Tortonian stage (8.68 ± 0.09 Ma), a time when the geographic position of this site was already similar to today. Paleotemperatures reconstructed from speleothems show that mean annual air temperatures (MAAT) in the region were + 6.6°C to + 11.1°C, when contemporary global MAAT were ~ 4.5 °C higher than modern. Our findings provide direct evidence that warming to Tortonian-like temperatures would leave most of the Northern Hemisphere permafrost-free. This may release up to ~ 130 petagrams of carbon, enhancing further warming.

Siberia

PFAS sampling activities in the U.S. Geological Survey national networks

Per- and polyfluoroalkyl substances (PFAS), frequently called “forever chemicals,” are used for a wide variety of industrial purposes and are often found in common household and industrial items such as firefighting foams, non-stick cookware, and water-resistant materials. The contamination of water, air, and soil by PFAS is a national and global issue due to their widespread occurrence in multiple applications and resistance to biodegradation and other traditional treatment processes. Research indicates that many PFAS can be emitted to the atmosphere and transported and deposited long distances from the source. The U.S. Geological Survey (USGS) Water Resources Mission Area received funding to implement a national-scale sampling effort to assess PFAS occurrence. To follow agency directives, the National Water Quality Network (NWQN) added PFAS sample monitoring for both surface water and groundwater, and also added PFAS monitoring to selected sites in the National Atmospheric Deposition Program (NADP).

General Information Product

Slope Unit Maker (SUMak): An efficient and parameter-free algorithm for delineating slope units to improve landslide modeling

Slope units are terrain partitions bounded by drainage and divide lines. In landslide modeling, including susceptibility modeling and event-specific modeling of landslide occurrence, slope units provide several advantages over gridded units, such as better capturing terrain geometry, improved incorporation of geospatial landslide-occurrence data in different formats (e.g., point and polygon), and better accommodating the varying data accuracy and precision in landslide inventories. However, the use of slope units in regional ( > 100 km 2 ) landslide studies remains limited due, in part, to the large computational costs and/or poor reproducibility with current delineation methods. We introduce a computationally efficient algorithm for the parameter-free delineation of slope units that leverages tools from within TauDEM and GRASS, using an R interface. The algorithm uses geomorphic laws to define the appropriate scaling of the slope units representative of hillslope processes, avoiding the often ambiguous determination of slope unit size. We then demonstrate how slope units enable more robust regional-scale landslide susceptibility and event-specific landslide occurrence maps.

Natural Hazards and Earth Systems Sciences (NHESS)

Modeling interconnected minerals markets with multicommodity supply curves: Examining the copper-cobalt-nickel system

Demand for many of the metals used in the energy transition is expected to grow rapidly. Many of these are by-products, often considered critical because their production responds weakly to prices and is instead tied to the economics of the host mineral. We present a model of prices and production for jointly produced commodities that accounts for interconnectivity between host and by-product markets at the mine level. We demonstrate this method using the copper–cobalt–nickel system, in which approximately 99% of cobalt is a by-product of copper or nickel mining. Our results show that the model more accurately captures the economic benefits of diversified mine outputs than previous approaches. Furthermore, changes in demand drivers for any two commodities produce non-linear effects on production and price. We challenge the prior best-practice assumption that cobalt cannot impact the copper or nickel markets. Recognizing the importance of both copper and cobalt for future electrification, we emphasize that incentivizing the copper industry to reduce cobalt supply risks could inadvertently undermine copper supply.

Nature Communications

Geohydrology of the Cross-Florida Barge Canal area, with special reference to the Ocala vicinity

The Cross-Florida Barge Canal route commences at Palatka on the St. Johns River, about 75 miles upstream from the Atlantic Ocean, and extends 110 miles southwestward across Peninsular Florida into deep water in the Gulf of Mexico near Yankeetown. The canal will be equipped with five locks, each 600 feet long and 84 feet wide, and the channel will be a minimum of 12 feet deep and 150 feet wide. From near Ocala northeastward, the canal channel will replace much of the natural channel of the Oklawaha River, and will be excavated into beds of the so-called shallow sand aquifer of Miocene age and younger, which overlies limestone of the Floridan aquifer. Westward from Ocala, most of the canal will be excavated below the potentiometric surface into limestone and dolomite of the Floridan aquifer. Water levels of Rodman, Eureka, and Inglis Pools will be controlled by dams and spillways with the limited exchange of water between the pools and the aquifers. The water levels in the Summit Pools will fluctuate with the natural changes in the ground-water level of the Floridan aquifer, although the stage of the pool will be controlled partly by the stage held in the Eureka Pool. A dynamic inflow-outflow relationship will exist between the Summit Pool and the Floridan aquifer. The Floridan aquifer in the canal area is 1,000 to 1,200 feet thick and consists of limestone and dolomite of middle Eocene Miocene age, including from older to younger, the Lake City, Avon Park, and Ocala limestones plus permeable sandy, dolomitic limestone in the lower part of the Hawthorn Formation. It is possible that most of the flow to the two major springs in the area occurs in the upper 100 feet or so of the aquifer in the Ocala Limestone. The aquifer is underlain by the Oldsmar limestone of early Eocene age and is overlain by sand, clayey sand, clay and shell beds of Miocene through Holocene age, in thickness from a few feet to 300 feet. The permeable beds overlying the Floridan aquifer constitute the shallow aquifer, while the poorly permeable ones act as confining beds where the Floridan aquifer is under artesian conditions. A north-south line drawn separating the head of Silver Springs on the west from the Oklawaha River on the east marks the approximate western limit of a continuous blanket of materials of Miocene-Pliocene(?) age covering the rocks of the Floridan aquifer. East of the line, much of the aquifer is under artesian conditions, particularly in the Oklawaha River valley, although in some areas east of the valley, direct recharge through thick permeable Miocene-Pliocene(?) sands occurs. West of the line, only scattered remnants of a once continuous Miocene-Pliocene(?) cover remain. Lack of the cover is a result of erosion on the crest and flank of the Ocala Uplift, a broad northwest-southeast trending anticlinal upwarp, the axis of which is crossed by the canal route in the Dunnellon area. Over most of this area the Floridan aquifer is unconfined and receives direct recharge through a cover of a few tens of feet of sand and clayey sand of Quaternary age. Tensional stresses during the structural evolution of the Ocala Uplift produced an intersecting system of fractures and normal faults in rocks of the Floridan aquifer. The fractures and faults are important controls for orientation of solution channels and, therefore, for development of ground-water circulation patterns. When the system surface streams, which once drained the Barge Canal area, eroded the poorly permeable Miocene-Pliocene(?) cover from the flanks of the Ocala Uplift, surface runoff was reduced and precipitation began to directly infiltrate the underlying limestones. Now only principal streams remain, such as the Oklawaha and Withlacoochee Rivers and a few short tributaries, while one of the most highly developed subsurface drainage systems in the world has evolved in cavernous limestone of the Floridan aquifer. Two of the larger freshwater springs in the world now discharge from the Floridan aquifer in the canal area. Silver Springs near Ocala discharges an average 531 mgd (million gallons per day) down the 4-mile long Silver River, which flows on poorly permeable beds to the Oklawaha River. Rainbow Springs near Dunnellon discharges on average 468 mgd from numerous orifices in the bed of the 5-mile-long Rainbow River, which flows into the Withlacoochee River. The heads of the springs have migrated to their present positions partly because of a tendency of ground-water levels to decline as permeability in the aquifer is increased due to removal of limestone by solution, and because of mechanical erosion of the limestone in the vicinity of the spring heads. Also, points of principal spring discharges have shifted in the past due to changes in ground-water levels in response to changes in sea level. The subsurface drainage system is continuing to evolve today, as evidenced in part by frequent occurrence of new sinkholes and by the presence of significant amounts of calcium bicarbonate in the spring waters. Rodman Pool, at the east end of the canal, is separated from the Floridan aquifer by poorly permeable materials. The pool's operating water level will be only a few feet above the potentiometric surface at the downstream end, and at or slightly below the potentiometric surface at the upstream end. Little exchange of water between the Rodman Pool and the Floridan aquifer is expected. Eureka Pool, just upstream from Rodman Pool, will also be separated from the Floridan aquifer by poorly permeable beds. However, the stage of the pool will be about 15 feet higher than the natural potentiometric surface at the pool's downstream end, and some seepage into the Floridan aquifer is anticipated through faults and leaky parts of the poorly permeable beds, with a consequent rise in ground-water levels in areas adjacent to the lower end of the pool. Possibilities for particulate contamination of the aquifer will tend to be minimized because of the filtering capacity of the materials through which water must pass to reach the aquifer, although the natural filter will not preclude movement into the aquifer of contaminants which might become dissolved in the pool waters. No significant interchange of water between the pool and the aquifer is expected at the upstream end of the Eureka Pool. Present construction plans indicate an operating stage for Eureka Pool which will range between 38 and 40 feet above mean sea level, although it is possible to dredge the pool deep enough to permit a range in stage of 36 to 40 feet. A backwater effect extending up Silver River from the Eureka Pool is expected to regulate the stage at the head of Silver Springs between 39 and 44 feet above mean sea level if the pool ranges between 36 and 40 feet. If Eureka Pool ranges only between 38 and 40 feet, the range of stage at the head of the springs should be about 41 to 44 feet above mean sea level. From Inglis Lock west, the canal will have direct connection with the Gulf, and canal stage will fluctuate with the Gulf tide. Since the canal stage will be slightly lower than the adjacent ground-water levels along much of the reach, there will be some ground-water inflow to the canal. No significant changes in the existing ground-water regime are expected in the vicinity of Inglis Pool, the first step up in the canal east of the Gulf. Existing ground-water and surface-water levels in the area will not change appreciable, and the natural stage and flow of Rainbow Springs, which will flow by way of Rainbow River into Inglis Pool, should not be affected by canal operations. A possible adverse effect of the canal on the Inglis Pool area could result if sea water is locked up from the Gulf through Inglis Lock. However, the high step of 25 feet at the lock, flushing action of continuous flow from Inglis Pool to the lower reaches of the Withlacoochee River, and use of possible preventive locking procedures should minimize the problem. The potential for adverse effects on the ground-water regime is greatest in the area of the Summit Pool. Through most of the length of the pool, the canal channel will be excavated into limestone of the Floridan aquifer to depths of 12 to 27 feet below the potentiometric surface. Changes that will take place in the ground-water flow system in the Silver Springs drainage area, once the canal is completed, were estimated by flow-net analysis. Variation in aquifer transmissivity was determined by calculating transmissivity in 25 different flow cells surrounding Silver Springs. Transmissivity in the 25 cells averages about 15,600,000 gpd/ft [2,090,000 ft2/day (feet squared)], but transmissivity in the six cells through which the Summit Pool passes ranges from 9,000,000 to 44,000,000 gpd/ft (1,210,000 to 5,900,000 ft2/day). Transmissivity was used to compute static stage of the Summit Pool under given ground-water level conditions. Had the canal existed in May 1968 and had the stage of Eureka Pool been held at 36 feet at the time, the static stage in Summit Pool would have been about 42.1 feet above mean sea level. Thus, a conceptual model of the changes in the potentiometric surface wrought by the finished canal was drawn, and zones of ground-water inflow and outflow were delineated. Most outflow from the Summit Pool to the aquifer should be limited to one 4-mile-long zone along the north side of the pool, about 5 miles south of Silver Springs. It is estimated that a water volume equivalent to about 8 percent of the daily flow of Silver Springs will enter the Summit Pool each day from the southern one-third of the Silver Springs drainage area. A like amount will reenter the aquifer at the main zone of outflow and move toward Silver Springs at an estimated average velocity of about 200 feet per day, if something close to the natural static stage of the pool is maintained by return pumpage of the lockage losses. At a velocity of 200 feet per day, water from the Summit Pool would discharge at Silver Springs about 140 days later. However, any estimate of velocity in the highly cavernous limestone aquifer in the area should be used with caution, because difficult to measure changes in porosity and thickness of major zones of flow may cause large variations in velocity. If all lockage losses are returned to the Summit Pool by pumping from Eureka Pool, no net loss from the Silver Springs drainage area, except for some evaporation from the water surface in the canal and possible leakage around locks, will result from canal operations. The zone of outflow from the Summit Pool to the aquifer will be in a natural potentiometric trough, and the zone of inflow will be in a potentiometric ridge area. The equilibrium water level in the pool will tend to be about 1 foot higher than the altitude of the lowest level in the pre-canal potentiometric trough, and about 2 feet lower than the highest level on the pre-canal potentiometric ridge. West of the Silver Springs drainage area just east of Dunnellon Lock, in the area of a local potentiometric high, the water level in the Summit Pool is expected to be about 15 feet below the natural potentiometric surface. In most areas 2 to 3 miles away from the Summit Pool, effects of the canal on the natural potentiometric surface should be slight. The stage of the Summit Pool, judging from the 36-year record for ground-water level changes and the anticipated indirect effect of the controlled stage in Eureka Pool, should have a maximum of about 10.5 feet with a maximum water level of about 51.5 feet above mean sea level and a minimum of about 41.0 feet above mean sea level. Of particular importance in the Summit Pool is an implementation of well planned construction and operational procedures designed to minimize risks of ground-water contamination.

Florida

The Sedimentary Geochemistry and Paleoenvironments Project Phase 2 data release: An open data resource for the study of Earth's environmental history

Geochemical data from sedimentary rocks are the primary source of information regarding Earth's surface evolution through time, including its air and water envelopes and interactions with life and deep Earth processes. The Sedimentary Geochemistry and Paleoenvironments Project (SGP) is a scientific consortium centered around open data and community-driven development of cyberinfrastructure tools and resources for sedimentary geochemistry and Earth history. Here we describe the SGP Phase 2 data release, which focused on incorporating Paleoproterozoic and Mesoproterozoic (2500–1000 million years ago) data and better accommodating carbonate data. This data release was built through the involvement of >200 researchers worldwide in academia, government, and industry, and provides the largest available public data resource for our user community in the academic fields of geochemistry, sedimentology, tectonics, paleontology, Earth history, and paleoclimate, as well as the petroleum and minerals industries. The dataset now encompasses 126,006 samples and 4,132,371 geochemical analyses. In addition to direct entry by SGP Team Members, we have ingested and incorporated datasets from the Geoscience Australia OZCHEM database, the Alberta Geological Survey, and the Deep-Time Marine Sedimentary Element Database (DM-SED) compilation. This paper details sampling in the Phase 2 dataset with respect to age, geography, lithology, and other geological characteristics, documents access via our search website and API, discusses possible issues and/or biases in the dataset that could impact analyses, describes plans for governance and stewardship of data from Indigenous lands, and serves as the citable reference paper for the data release.

Chemical Geology

Estimating the probability of elevated nitrate (NO2+NO3-N) concentrations in ground water in the Columbia Basin Ground Water Management Area, Washington

Logistic regression was used to relate anthropogenic (man-made) and natural factors to the occurrence of elevated concentrations of nitrite plus nitrate as nitrogen in ground water in the Columbia Basin Ground Water Management Area, eastern Washington. Variables that were analyzed included well depth, depth of well casing, ground-water recharge rates, presence of canals, fertilizer application amounts, soils, surficial geology, and land-use types. The variables that best explain the occurrence of nitrate concentrations above 3 milligrams per liter in wells were the amount of fertilizer applied annually within a 2-kilometer radius of a well and the depth of the well casing; the variables that best explain the occurrence of nitrate above 10 milligrams per liter included the amount of fertilizer applied annually within a 3-kilometer radius of a well, the depth of the well casing, and the mean soil hydrologic group, which is a measure of soil infiltration rate. Based on the relations between these variables and elevated nitrate concentrations, models were developed using logistic regression that predict the probability that ground water will exceed a nitrate concentration of either 3 milligrams per liter or 10 milligrams per liter. Maps were produced that illustrate the predicted probability that ground-water nitrate concentrations will exceed 3 milligrams per liter or 10 milligrams per liter for wells cased to 78 feet below land surface (median casing depth) and the predicted depth to which wells would need to be cased in order to have an 80-percent probability of drawing water with a nitrate concentration below either 3 milligrams per liter or 10 milligrams per liter. Maps showing the predicted probability for the occurrence of elevated nitrate concentrations indicate that the irrigated agricultural regions are most at risk. The predicted depths to which wells need to be cased in order to have an 80-percent chance of obtaining low nitrate ground water exceed 600 feet in the irrigated agricultural regions, whereas wells in dryland agricultural areas generally need a casing in excess of 400 feet. The predicted depth to which wells need to be cased to have at least an 80-percent chance to draw water with a nitrate concentration less than 10 milligrams per liter generally did not exceed 800 feet, with a 200-foot casing depth typical of the majority of the area.

Washington

Tectonically driven integration of the 4.8 Ma Colorado River USA tracked with detrital sanidine and fish genetics

The development of the continental-scale Colorado River system, western USA, from 8 to 4.8 Ma, is revealed using 60-40 Ma detrital sanidine tracer grains and fish phylogeny. Here we show that precursor paleoriver segments became integrated north to south as traced by 60-40 Ma sand grains that were derived from the north and sequentially appeared in the 25-8 Ma Browns Park Formation of Utah, 7-6 Ma upper Bidahochi Formation of Arizona, and 4.8 Ma Bouse Formation of the lower Colorado River and proto Gulf of California. This timing is mimicked by molecular clock estimates of divergence times among fish lineages. River integration was a response to headwater uplifts in the Yellowstone hotspot track and Rocky Mountains. 40 Ar/ 39 Ar ages refine the timing for mantle-drips that caused subsidence, then uplift, of depositional basins that influenced the integration pathway and tempo. The ~ 3-million-year timescale suggests that multiscale mantle-driven uplift, rather than lake spillover, was the primary driver for integration of the proto-Colorado River through Grand Canyon.

Colorado River

Design and function of the Autonomous Benthic Imaging and Surveying System (ABISS) for remote sensing of lake and seabed environments

Lake and seabed environments are home to fisheries and other biota that are important to ecosystems and economies, yet these environments and the species that use them are difficult to accurately assess and monitor. Traditional benthic survey techniques, like bottom trawling used by the U.S. Geological Survey, are limited by substrate constraints, poor spatial resolution and precision, and operational depth limits, hindering accurate assessment of benthic species and habitats. In response to these limitations, the U.S. Geological Survey developed the Autonomous Benthic Imaging and Surveying System, a camera system integrated into underwater vehicles, to capture high-resolution images of the lakebed. The system uses color and stereo cameras to collect imagery, which can be analyzed using computational methods to detect organisms and (or) characterize habitat features, such as geologic substrate types. The system has been integrated into autonomous underwater vehicles and into an underwater housing used by self-contained underwater breathing apparatus (SCUBA) divers. Although the engineering of the system was motivated by the need for data collection in the Great Lakes, it has potential to collect high quality data in any aqueous setting with sufficient water clarity and safe operating conditions. The Autonomous Benthic Imaging and Surveying System can operate across diverse depths and light conditions to map and quantify ecological patterns that were difficult or impossible to assess using traditional methods. The Autonomous Benthic Imaging and Surveying System offers the potential for accurate and precise monitoring and assessment of native benthic biota, invasive species, and habitat, potentially providing natural resource managers with improved information to support decision making about benthic resource management.

Great Lakes

Rapid earthquake magnitude classification via P-wave strains from borehole strainmeters and Distributed Acoustic Sensing

Distributed Acoustic Sensing (DAS) offers a promising approach for earthquake early warning (EEW) in settings where seismic networks are costly to maintain. By repurposing fiber-optic cables as dense strainmeter arrays, DAS enables real-time earthquake detection wherever those fibers are accessible. However, poor azimuthal coverage and challenges in estimating magnitude from strain measurements remain key hurdles in applying for earthquake monitoring. Here, we develop a machine learning method to distinguish large (M≥5.4) earthquakes from smaller ones within the first 4 seconds of a strain waveform after a P-wave arrival without determining location. Using ensemble decision tree models trained on borehole strainmeter data (3.5≤M≤7.1) and tested on onshore DAS waveforms (including the 2024 M7 Offshore Cape Mendocino earthquake), we find that low-frequency (0.2–0.5 Hz) continuous wavelet transform coefficients are the strongest predictors of magnitude, in addition to strain amplitude. Both DAS and borehole strainmeters effectively capture long-period strain signals, making these findings valuable for EEW systems. Our method shows high precision compared to the real-time EEW system, ShakeAlert®, supporting the position that DAS is a viable technology for earthquake monitoring and magnitude classification.

California

CRESCENT earthquake dynamic rupture, earthquake cycle, and tsunami code verification platform

Physics-based simulations are critical for understanding natural hazards. The increasing complexity of numerical codes requires benchmark exercises to verify that different computational methods yield consistent results when solving the same governing equations. Here, we present an open-access web platform designed for the verification of earthquake dynamic rupture, seismic cycle, and tsunami simulations. The platform architecture utilizes a modular, serverless backend on Amazon Web Services (AWS) to provide scalable file processing and visualization. A lightweight static web application provides a secure interface for uploading and managing results, while the browser-based data visualization enables interactive analysis of time series and surface grid data. By using structured JavaScript Object Notation (JSON) text files to define benchmark structures, the system remains fully extensible, allowing the addition of new scenarios without modifying the underlying software logic. The platform hosts the "The Tsunami Problem Versions" (TTPV) 1 & 2, two benchmarks for 3D fully coupled earthquake dynamic rupture and tsunami generation, and provides a framework for earthquake cycle models. This community resource aims to build trust in numerical simulations and facilitate long-term collaborative code verification as modeling software continues to evolve.

Seismica

Regional evaluation of evapotranspiration in the Everglades

Nine sites in the Florida Everglades were selected and instrumented for collection of data necessary for evapotranspiration-determination using the Bowen-ratio energy-budget method. The sites were selected to represent the sawgrass or cattail marshes, wet prairie, and open-water areas that constitute most of the natural Everglades system. At each site, measurements necessary for evapotranspiration (ET) calculation and modeling were automatically made and stored on-site at 15- or 30-minute intervals. Data collected included air temperature and humidity at two heights, wind speed and direction, incoming solar radiation, net solar radiation, water level and temperature, soil moisture content, soil temperature, soil heat flux, and rainfall. Data summarized in this report were collected from January 1996 through December 1997, and the development of site-specific and regional models of ET for this period is described. Latent heat flux is the energy flux density equivalent of the ET rate. Modified Priestley-Taylor models of latent heat flux as a function of selected independent variables were developed at each site. These models were used to fill in periods of missing latent heat flux measurement, and to develop regional models of the entire Everglades region. The regional models may be used to estimate ET in wet prairie, sawgrass or cattail marsh, and open-water portions of the natural Everglades system. The models are not applicable to forested areas or to the brackish areas adjacent to Florida Bay. Two types of regional models were developed. One type of model uses measurements of available energy at a site, together with incoming solar energy and water depth, to estimate hourly ET. This available-energy model requires site data for net radiation, water heat storage, and soil heat flux, as well as data for incoming solar radiation and water depth. The other type of model requires only incoming solar energy, air temperature, and water depth data to provide estimates of hourly ET. The second model thus uses data that are more readily available than the data required for the available-energy model. Computed ET mean annual totals for all nine sites for the 1996-97 period ranged from 42.4 inches per year at a site where the water level is below land surface for several months each year to 57.4 inches per year at an open-water site with no emergent vegetation. Although the density of photosynthetically-active plant leaves has been shown to relate directly to ET in some studies, it does not appear to relate directly to ET in the Everglades, based on comparison of annual ET data with leaf-area index, defined as the Normalized Difference Vegetation Index (NDVI), data from satellite imagery. NDVI and ET appear to be inversely related in the Everglades. The greatest ET rates occurred at open-water sites where the NDVI data indicated the lowest leaf-area index. Among the remaining vegetated sites, there is no clear relation between ET and NDVI, though the highest ET rate corresponded to the lowest NDVI and one of the lowest ET rates corresponded to the highest NDVI value. The variation in ET follows a seasonal pattern, with lowest monthly ET totals occurring in December through February, and highest ET occurring in May through August. The greatest range in monthly ET among all nine sites for the 2-year period occurred at site 3: from 1.81 inches in December 1997 to 6.84 inches in July 1996. A study to compare the Bowen-ratio/energy balance method of ET measurement with the eddy-correlation method was done at one site from June 22, 1998, through September 28, 1998. This comparison indicated that both methods gave comparable values of the Bowen ratio, but there was a considerable difference in available energy measured by the two methods. The mean of all 30-minute measured turbulent heat fluxes from the eddy-correlation apparatus for June 22 through September 29, 1998, was 137.4 watts per square meter, and the mean of the corresponding measured energy was 163.6 watts per square meter, or about 20 percent greater. The disagreement in mean energy fluxes measured by the two methods is problematical and is not fully understood. Although the difference seems to be related to friction velocity, and is practically non-existent at values of friction velocity greater than 0.3 meter per second, the "correctness" of either method cannot be determined with the data available.

Florida

A practical framework for identifying genetic subpopulations and ESUs: Insights for IUCN assessments and broader management

Species conservation assessments evaluate extinction risk, and recovery potential, advancing species persistence through guiding resource prioritization and planning. Assessment frameworks, including the International Union for Conservation of Nature Red List and Green Status of Species, typically focus on species as a whole. Importantly, they do not routinely account for genetically distinct units or do not have standardized methods of unit delineation. This limits the representation of genetically distinct components, including adaptive genetic diversity that underpins long-term resilience and recovery. Incorporating standardized within-species units like subpopulations and Evolutionarily Significant Units (ESUs) into species assessments could help address this oversight. However, identifying and delineating such units remain challenging, particularly when molecular data are limited. Here, we propose a flexible framework that integrates molecular and non-molecular evidence to identify both subpopulations and ESUs across taxa, providing a practical tool to incorporate within-species diversity into conservation assessments.

BioScience

The damability function: A probabilistic approach to regional landslide dam susceptibility analysis applied to the Oregon Coast Range, USA

Landslides can dam rivers and require rapid response to mitigate catastrophic outburst floods. Here, we present a workflow to map landslide dam formation susceptibility at a regional scale. We define a probabilistic function that combines river valley width and landslide volume to efficiently determine the likelihood of a landslide dam or “damability”. We combine damability values with landslide susceptibility to estimate landslide dam susceptibility. The valley width measurements are automated using a new elevation threshold-based algorithm. Landslide volume is represented as a statistical distribution from mapped landslides. We validate and apply our approach to the Oregon Coast Range, USA and find that 36 % of river stretches exceed a dam potential threshold; these are in river headwaters and steeper terrain, which in this case correlate with more resistant lithologies. We also estimate volumes of the potential dammed lakes and find that most rivers with high dam susceptibility are less likely to impound large lakes because they have low drainage areas. However, widespread susceptibility, and the potential impacts from exceptionally large landslides, suggest that this hazard should be considered in the Pacific Northwest. The damability function workflow can ingest new data and be applied more broadly to assess future landslide dam hazards.

Oregon

Projections of multiple climate-related coastal hazards for the US Southeast Atlantic

Faced with accelerating sea level rise and changing ocean storm conditions, coastal communities require comprehensive assessments of climate-driven hazard impacts to inform adaptation measures. Previous studies have focused on flooding but rarely on other climate-related coastal hazards, such as subsidence, beach erosion and groundwater. Here, we project societal exposure to multiple hazards along the Southeast Atlantic coast of the United States. Assuming 1 m of sea level rise, more than 70% of the coastal residents and US \ $ 1 trillion in property are in areas projected to experience shallow and emerging groundwater, 15 times higher than daily flooding. Storms increase flooding exposure by an order of magnitude over daily flooding, which could impact up to ~50% of all coastal residents and US \ $ 770 billion in property value. The loss of up to ~80% of present-day beaches and high subsidence rates that currently affect over 1 million residents will exacerbate flooding and groundwater hazard risks.

Florida, Georgia, North Carolina, South Carolina,