Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Natural Hazards”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

486 records · Page 12Linked to original sources
USGS2026

Small earthquake moment magnitude and implications for frequency–magnitude scaling of injection induced earthquakes of the Raton Basin

Accurate estimation of earthquake source parameters—such as moment magnitudes, corner frequencies, and stress drops—is essential for improving seismic hazard assessments and understanding earthquake physics. In this study, moment magnitudes ( M W ) are calculated for 31,581 earthquakes associated with wastewater injection in the Raton Basin (located along the border between northern New Mexico and southern Colorado) between 2016 and 2024 using radiative transfer theory to fit coda decay envelopes. Our results show that it is feasible to estimate moment magnitudes down to M W ~1 with coda envelopes from a small local monitoring network. Significant differences were found between M W and local magnitudes ( M L ) for small earthquakes ( M < 3.0). A linear relationship was optimized to convert M L to M W : M W = 0.7 M L + 0.96 and M W = 0.73 M L + 0.99 (for the events reported by the U.S. Geological Survey), which can be applied in future studies of Raton Basin seismicity. We find that b -values calculated employing different methods and using M L are approximately 1.0, while those using M W range from 1.2 to 1.4. A larger estimate of the b -value could influence interpretations of the statistical behavior of earthquakes associated with injection and consequently seismic hazard assessments based on a magnitude–frequency distribution. The potential differences between local versus moment magnitude-based earthquake statistics should be considered in other seismically active regions.

Colorado, New Mexico↗
USGS2024

Constraining mean landslide occurrence rates for non-temporal landslide inventories using high-resolution elevation data

Constraining landslide occurrence rates can help to generate landslide hazard models that predict the spatial and temporal occurrence of landslides. However, most landslide inventories do not include any temporal data due to the difficulties of dating landslide deposits. Here we introduce a method for estimating the mean landslide occurrence rate of deep-seated rotational and translational slides derived solely from high-resolution (≤3 m) elevation data and globally available estimates of the diffusion coefficient for sediment flux. The method applies a linear diffusion model to the roughest landslide deposits until they reach a representative non-landslide roughness distribution. This estimates the time for a landslide deposit to be unrecognizable in high-resolution digital elevation data, which we term the mean lifetime of the landslide. Using the mean lifetime and number of landslides within an area of interest, we can estimate the mean occurrence rate of landslides over that domain. We validate this approach using a comprehensive temporal inventory of landslides in western Oregon created using age-roughness curves that are calibrated with high-resolution elevation data and radiocarbon data. We find good agreement between our diffusion method and the existing age-roughness-derived estimates, producing mean lifetimes of 4500 and 5200 years (4% difference), respectively. Hazard maps produced using the two methodologies generally agree, with the maximum differences in landslide probability reaching 0.1. Due to the relative abundance of high-resolution elevation data compared with age-dated landslides, our method could help constrain landslide occurrence rates in areas previously considered unfeasible.

Oregon↗
USGS2025

Near-surface geophysics: Environmental applications

The field of geophysics encompasses a broad and diverse compilation of methodologies that employs principles of physics to characterize properties of earth materials within the subsurface. While geophysical methods have a long history in resource exploration and studies of Earth’s interior, the subdiscipline of “near-surface geophysics” has evolved in recent decades for examination of the shallow, near-surface environment for a range of purposes ranging from archaeological or forensic investigations to assessment of geologic, hydrologic, biologic, and geochemical properties and processes. “Environmental geophysics” are near-surface geophysical studies and methods that focus on understanding natural systems (e.g., watershed hydrology, groundwater–surface water connections, biophysical processes) as well as research pertaining to anthropogenic impacts and land management, (e.g., contamination and remediation, saltwater intrusion, agricultural practices). This field can be further subdivided into subdisciplines focused on specific topics and applications, such as water resources and hydrology (hydrogeophysics) or biologic and microbial processes (biogeophysics). Studies in environmental geophysics span a range of scales, from pore-scale laboratory tests to watershed-scale or regional field experiments. Methods vary by the nature of physics employed, the specific measurement acquired, and how that data is ultimately processed and analyzed to produce interpretable results. There exists further diversity in the acquisition logistics, geometry, and timing of data collection. Geophysical data can be collected in boreholes (one-dimensional, 1-D, vertical profiles), along survey lines (two-dimensional, 2-D, cross-sections), or in dense sensor arrays or gridded profiles (three-dimensional, 3-D, models). Regarding the temporal aspect, studies can conduct one-time geophysical surveys to obtain detailed imaging of subsurface structure or use timelapse and continuous monitoring to investigate variations in subsurface properties over time. The cumulation of all possible permutations of these factors (method, acquisition geometry, survey design, and target application) results in an immense diversity among environmental geophysical studies. Nevertheless, this field remains unified in the pursuit of understanding natural and human-impacted near-surface environments through geophysical investigations. Here we highlight some key references within environmental geophysics. Resources on geophysical theory, acquisition logistics, processing and inversion workflows, and example case studies are categorized into the most common geophysical classes within Geophysical Methods. Lastly, example references for the dominant types of applications in environmental geophysical studies are catalogued in Environmental Applications.

Book chapter↗
USGS2026

From collision to subduction: Thermal-kinematic inversions constrain plate boundary structure and dip-slip activity in southwestern New Zealand

Constraints on three-dimensional fault system geometry and kinematics are required to understand both long-term tectonics and contemporary seismic hazard. In many cases, these parameters must be inferred from a combination of different data or analyses. Here, we invert low-temperature thermochronological data to quantitatively parameterize both the crustal-scale geometry and late Cenozoic dip-slip activity of the plate boundary system in southwest New Zealand. We find that the modern transpressive plate boundary system has accommodated the bulk of Australian-Pacific Plate convergence since establishment in the middle Miocene-early Pliocene. Shortening has occurred via (a) dextral-reverse slip on the moderate angle, listric central Alpine Fault décollement, and (b) reverse-slip on either the sharply curved, anti-listric northern Puysegur subduction interface or low-angle offshore thrust fault system that splays from the high-angle southern Alpine Fault at depth. We resolve late Cenozoic shortening rates on these structures that are indistinguishable, and interpret these to reflect the transfer of convergent deformation outboard of the predominantly strike-slip southern Alpine Fault. Our work helps elucidate the transition from strain localized oblique continental collision to strain partitioned subduction. We also provide an estimate of the across-strike width of the central-southern Alpine Fault section boundary at seismogenic depths. This is the first quantitative constraint on the geometry of a structural feature inferred to have arrested several major prehistoric earthquakes. This study furthers understanding of fault structure and dip-slip kinematics along the greatest sources of seismic hazard in and offshore of southwest New Zealand.

South Island↗
USGS2025

Dynamic feedbacks between river meandering and landsliding in northwestern Washington glacial terraces

Landsliding in river valleys poses unique risks for cascading hazards and can damage infrastructure and cause fatalities. In postglacial valleys, many landslides are posited to occur in relation to lateral river erosion, but the dynamics of fluvial-hillslope interactions are not well understood. Here, we investigate a section of the Nooksack River in western Washington State where the channel is flanked by landslide-prone glacial terraces similar to those that failed in the 2014 State Route 530 “Oso” landslide. We map 216 landslides through time across 17 aerial imagery data sets (1933–2022) and analyze them in relation to river meandering and curvature. We observe dynamic feedbacks between lateral river meandering and valley-adjacent landsliding. Terrace lateral retreat rates of up to 25 m/year owing to combined fluvial erosion and slope failure occur on pinned, outer meander bends immediately downstream from peaks in river curvature (>0.0075 1/m); these locations are predisposed to both shallow and deep-seated landslides. Deep-seated landslides extending 17%–32% of the active valley width into the floodplain can displace the river away from the floodplain margin and change the channel planform. River-displacing landslides relocate meanders up- or downstream, thereby conditioning the location of subsequent landslides. This conceptual model of coupled landslide-driven meander displacement and valley-adjacent landsliding is exemplified across western Washington river systems. The distance between up- and downstream valley-adjacent landsliding scales with valley width, meander wavelength, and terrace height. Our results can advance our understanding of the river-hillslope interface in landscape evolution and can be used to inform hazard management in river corridors.

Washington↗
USGS2026

Interplay between tectonics and submarine mass transport deposits in Cortes Basin: New high-resolution geophysics in the Outer California Borderland

The Outer California Borderland (OCB) is an active transform plate boundary offshore Southern California, where the relationship between faulting and submarine mass transport deposits (MTDs) remains poorly understood. Onshore paleoseismic data provide high-resolution earthquake records, whereas marine geophysical data capture longer-term histories. Offshore fault systems pose hazards to infrastructure and dense coastal populations, particularly when linked to submarine landslides. We present new high-resolution geophysical data set (cruise SR2303), including bathymetric and CHIRP sub-bottom data integrated with legacy seismic reflection data and chronostratigraphic constraints from ODP Site 1012 to examine Quaternary MTD recurrence and tectonic controls in the Cortes Basin, OCB. Bathymetry shows deformational features, including slide scarps and previously unmapped fault segments with evidence of Holocene activity. CHIRP profiles reveal 10 stacked MTDs in the East Cortes Basin and 8 in the West Cortes Basin, spanning ∼752 ka with an average recurrence of ∼83.6 ± 1 ka. Acoustic imaging shows 7 MTD intervals coinciding with fault offset increments and fault growth suggesting earthquake-triggered mass wasting. A strong association between MTD occurrences and sea-level extremes also supports glacio-eustatic contribution to slope failure. Stratigraphic correlations suggest quasi-synchronous MTDs across the eastern and western areas, likely triggered by larger eathquakes in the Quaternary. Although the identified MTDs occur relatively far from the Southern California coast, they still pose a potential tsunamigenic hazard requiring further assessment. Moreover, if linked to earthquakes along major strike-slip faults, for example, the Ferrelo fault, the MTDs may provide valuable proxies to constrain rupture scenarios and fault connectivity within the understudied OCB.

California↗
USGS2025

Haunted Summerville: Ghostly lights or earthquake lights?

Among the colorful local lore in the Charleston, South Carolina, area, are a number of ghost stories, shared not only over campfires but also in published books. Among the most well-known of the stories is the tale of the Summerville Light. Local lore holds that a strange light sometimes seen in a remote area is a lantern carried by the ghost of a local woman who once waited hours for her husband, who turned out to have been decapitated earlier that day in a train accident (DePoppe, 2023). Extant sources suggest the ghost stories began to circulate in the 1950s to 1960s. So pervasive was the lore that (Old) Sheep Island Road became known among local residents as Light Road, with a local stretch of road known today as Old Light Road. Reviewing the location where the lights appear as well as the nature of accounts, I suggest that many if not all of the anecdotal observations can be most readily attributed to natural phenomena, including earthquake lights from earthquakes that were too small to be felt. Accounts of lights near Summerville cluster in proximity to the generally accepted epicenter of the 1886 Charleston, South Carolina, earthquake, where foreshocks to the 1886 mainshock were apparently concentrated, and within a few kilometers of three M3.5 – 4.4 earthquakes in 1959 and 1960.

South Carolina↗
USGS2025

Igneous differentiation in arcs

This chapter assesses crystallization-differentiation of convergent-margin magmas both from the standpoints of natural rock suites and from laboratory phase-equilibrium experiments. Crystallization-differentiation of dry subalkaline and alkaline basalts are summarized at the beginning for reference and context. Experiments crystallizing arc basalts through andesites at middle to upper crustal pressures (100–400 MPa), saturated either with H 2 O or mixed H 2 O-CO 2 , produce liquid lines of descent similar to arc igneous suites, with higher f O 2 s giving results closer to calc-alkaline magma series. Early enrichment of melts in SiO 2 with little or no enrichment in FeO* (total Fe as FeO) comes about by the combined effects of H 2 O suppressing crystallization of plagioclase relative to olivine, shifting plagioclase to more calcic – therefore lower SiO 2 – compositions, and suppressing silicate minerals to greater extents than Fe-rich spinel. Also contributing to SiO 2 enrichment is crystallization near the liquidus of higher proportions of olivine relative to calcic clinopyroxene, compared with MORB, but it is unclear if this is brought about by H 2 O or elevated pressure. Exhumed arc terranes, however, generally fail to expose evidence for primitive liquids having reached and differentiated at middle to upper crustal depths, at least in any abundance. Instead, most differentiation in arcs appears to take place in the lower crust or near the crust-mantle transition, and although hydrous experiments at such pressures produce liquids broadly similar to arc suites in their SiO 2 enrichment, the experimental liquids differ in becoming peraluminous at early stages of differentiation while melts have basaltic, basaltic andesitic, or andesitic SiO 2 concentrations. Crystallization of abundant calcic clinopyroxene close to the liquidus causes the high-pressure experimental liquids to become peraluminous with only small increases in SiO 2 concentration. In contrast, natural arc volcanic and plutonic suites become gradually less metaluminous with increasing SiO 2 , crossing to peraluminous at dacitic to rhyolitic SiO 2 concentrations. Hybridism, encompassing magma-mixing, assimilation of old crust, and incorporation of near-solidus melts from only shortly older deep, antecedent arc intrusions may accompany natural crystallization-differentiation, preventing melts from attaining peraluminous compositions at low-SiO 2 concentrations. If so, then nearly all arc suites are to substantial extents composites, rather than preserving simple, progressive liquid lines of descent. Some comments and assessments are also made on the participation of garnet in arc differentiation and on the production of arc batholiths.

Book chapter↗
USGS2022

South Carolina and Landsat

South Carolina, the eighth State admitted to the union, transcends its size with its deep, rich history; striking beauty; vast natural resources; and extensive cultural diversity. Home to part of the Blue Ridge Mountains of the Central Appalachians, the Upstate is graced with more than 100 waterfalls, while the Lowcountry borders the Atlantic Ocean with 187 miles of coastline and 35 barrier islands. Forests cover two-thirds of the State, and forestry and agriculture together, as agribusiness, make up South Carolina’s leading industry. Two historic crops—cotton and tobacco—still rank in the top 10 commodities, though corn and soybeans now rank higher. Poultry, cattle, peanuts, and flowers also make the list. South Carolina’s population totals more than five million. Other residents include a variety of wildlife, bird, reptile, and fish species, including Ursus americanus (black bears), Alligator mississippiensis (American alligators), and Tursiops truncatus (bottlenose dolphins). More than 100 tree species also reside in South Carolina, which pays homage to one with its “The Palmetto State” nickname. South Carolina’s subtropical climate, long coastline, and lower elevations make it highly susceptible to tornado and hurricane activity and coastal flooding. Projected sea-level rise is a growing concern. A view from space can help monitor and manage natural resources on the land and in rivers, marshes, and the coast. Landsat reveals not just what an area looks like now, but also insights from decades ago.

South Carolina↗
USGS1976

Guidelines for collection and field analysis of ground-water samples for selected unstable constituents

The unstable nature of many chemical and physical constituents in ground water requires special collection procedures and field analysis immediately after collection. This report describes the techniques and equipment commonly used in the collection and field analysis of samples for pH, temperature, carbonate, bicarbonate, specific conductance, Eh, and dissolved oxygen.

Open-File Report↗
USGS2025

Prospectivity mapping for geologic hydrogen

Geologic, or naturally occurring, hydrogen has the potential to become a new, low-carbon, primary energy resource. Often referred to as “white” or “gold” hydrogen, this gas occurs naturally in the Earth’s subsurface, similar to petroleum resources. However, unlike petroleum, which releases carbon dioxide when burned, burning hydrogen only produces water as a byproduct. Exploration for geologic hydrogen remains in an early stage and discoveries of high concentrations of subsurface hydrogen are still relatively rare. To facilitate research and exploration for this potential resource, this report presents the first publicly available prospectivity map of geologic hydrogen accumulations in the conterminous United States. Prospective regions are those regions in which all major components necessary for a hydrogen accumulation likely are present—a source of sufficient hydrogen generation, porous reservoirs for storage, and seals to prevent leakage. The midcontinent region of the United States and the central California coast are revealed as having high prospectivity. This analysis also identifies previously unrecognized prospective regions that may be favorable due to long distance lateral migration of subsurface hydrogen, such as the offshore eastern seaboard of the United States, and can provide a linkage between surface observations of hydrogen degassing and far-field source regions. The methodology developed to create this map is expandable and flexible and may be adapted to incorporate new concepts in the hydrogen system and for application to other regions of the world.

conterminous United States↗
USGS2026

Evaluation of best management practices at an edge-of-field site in the Eagle Creek watershed, Ohio, 2012–20

In 2010, the U.S. Geological Survey worked in partnership with the Great Lakes Restoration Initiative and the Natural Resources Conservation Service to identify farm fields in priority watersheds—watersheds critically important to Great Lake health. Intensive best management practices were implemented in five States to test the efficacy of best management practices, also referred to as agricultural conservation practices, to reduce sediment and nutrient runoff on agricultural fields. These fields were chosen as representatives of the priority watersheds because their farming practices and geographical conditions were common among farms in those watersheds. A farm site located near Findlay, Ohio, in the Eagle Creek watershed used two conservation practices, cover crop (Natural Resources Conservation Service practice standard 340) and variable rate technology (VRT; Natural Resources Conservation Service practice standard 590), which represent common practices in the Maumee priority watershed. This study monitored surface runoff and subsurface tile runoff at the Eagle Creek watershed site. The effects of cover crop and VRT nutrient application on sediment and nutrient runoff were assessed from October 2012 to September 2020. Cover crops were applied in fall of 2016, 2017, and 2018, coinciding with VRT applications. The following parameters were analyzed as part of the study: runoff discharge; peak discharge; and concentrations and loads of total phosphorus, particulate phosphorus, dissolved reactive phosphorus, and suspended sediment. High peak runoff events disproportionally affected nutrient concentrations and loads in runoff. A threshold of the 85th percentile of the peak discharge was chosen to assess the effect of cover crop and VRT nutrient application on nutrient mitigation at each gage. Runoff events below the 85th percentile were considered small, and runoff events over the 85th percentile were considered large. Concentrations from collected water-quality samples were used for the analysis; estimated concentrations were excluded from the statistical evaluation. All surface runoff parameters during small runoff events, except surface runoff volume, were significantly lower in the period with cover crops and VRT implementation. Contrarily, subsurface runoff parameters during small events were not statistically different between the periods with and without cover crops and VRT implementation. Surface and subsurface parameters during large events were also not statistically different between the periods with and without cover crops and VRT implementation. These results indicate cover crops and VRT may improve water quality during small runoff events, but additional best management practices that mitigate large runoff events may lead to greater water-quality improvement given the contribution of large events to overall losses.

Ohio↗
USGS2024

Potential climate and human water-use effects on water-quality trends in a semiarid, western U.S. watershed: Fountain Creek, Colorado, USA

Nutrients, total dissolved solids (TDS), and trace elements affect the suitability of water for human and natural needs. Here, trends in such water-quality constituents are analyzed for 1999–2022 for eight nested monitoring sites in the 24,000 km 2 Fountain Creek watershed in Colorado, USA, by using the weighted regressions on time, discharge, and season (WRTDS) methodology. Fountain Creek shares characteristics with other western U.S. watersheds: (1) an expanding but more water-efficient population, (2) a heavy reliance on imported water, (3) a semiarid climate trending towards warmer and drier conditions, and (4) shifts of water from agricultural to municipal uses. The WRTDS analysis found both upward and downward trends in the concentrations of nutrients that reflected possible shifts in effluent management, instream uptake, and water conservation by a watershed population that grew by about 40%. Selenium, other trace elements, and TDS can pose water-quality challenges downstream and their concentrations were found to have a downwards trend. Those trends could be driven by either a warming and drying of the local climate or decreased agricultural irrigation, as both would reduce recharge and subsequent mobilization from natural geologic sources via groundwater discharge. The patterns illustrate how changes in climate and water use may have affected water quality in Fountain Creek and demonstrate the patterns to look for in other western watersheds.

Colorado↗
USGS1976

Medicine Lodge thrust system, east-central Idaho and southwest Montana

The Medicine Lodge thrust system, exposed in east-central Idaho and southwest Montana, is a major segment of the North America Cordilleran fold and thrust belt on which Precambrian and Paleozoic rocks have been telescoped and transported far east of their depositional area. The fault has overlapped rocks that initially were deposited in differing sedimentary environments on opposite sides of the northwest-trending geanticlinal Lemhi arch. The nature of the arch itself has been obscured by later thrusting, but it can be roughly reconstructed as a major landmass recurrently uplifted from Precambrian Y time at least through the Mesozoic. Although sections of the large landmass have been identified in the past as small islands, it was instead a southern extension of Belt island, and exerted a major influence on sedimentation patterns. The thrust has obscured recognition of correlative sedimentary rock units. It also appears to have controlled the distribution of volcanic rocks in satellite centers of the main field of Challis Volcanics. The thrust system has exerted a major influence on the emplacement of granodiorite-quartz monzonite stocks and related mineral deposits in east-central Idaho. Recognition of the fault as a major influence in intrusive activity and deposition of metallic mineral deposits suggests new possibilities for mineral resource exploration in this region. And consideration of the stratigraphic, paleogeographic, and structural framework of sedimentary rocks beneath the thrust suggests the possibility of petroleum and natural gas resources in the region north of the Snake River Plain.

Idaho, Montana↗
USGS2024

Debris-flow entrainment modelling under climate change: Considering antecedent moisture conditions along the flow path

Debris-flow volumes can increase along their flow path by entraining sediment stored in the channel bed and banks, thus also increasing hazard potential. Theoretical considerations, laboratory experiments and field investigations all indicate that the saturation conditions of the sediment along the flow path can greatly influence the amount of sediment entrained. However, this process is usually not considered for practical applications. This study aims to close this gap by combining runout and hydrological models into a predictive framework that is calibrated and tested using unique observations of sediment erosion and debris-flow properties available at a Swiss debris-flow observation station (Illgraben). To this end, hourly water input to the erodible channel is predicted using a simple, process-based hydrological model, and the resulting water saturation level in the upper sediment layer of the channel is modelled based on a Hortonian infiltration concept. Debris-flow entrainment is then predicted using the RAMMS debris-flow runout model. We find a strong correlation between the modelled saturation level of the sediment on the flow path and the channel-bed erodibility for single-surge debris-flow events with distinct fronts, indicating that the modelled water content is a good predictor for erosion simulated in RAMMS. Debris-flow properties with more complex flow behaviour (e.g., multiple surges or roll waves) are not as well predicted using this procedure, indicating that more physically complete models are necessary. Finally, we demonstrate how this modelling framework can be used for climate change impact assessment and show that earlier snowmelt may shift the peak of the debris-flow season to earlier in the year. Our novel modelling framework provides a plausible approach to reproduce saturation-dependent entrainment and thus better constrain event volumes for current and future hazard assessment.

Illgraben basin↗
USGS2025

Increased flood exposure in the Pacific Northwest following earthquake-driven subsidence and sea-level rise

Climate-driven sea-level rise is increasing the frequency of coastal flooding worldwide, exacerbated locally by factors like land subsidence from groundwater and resource extraction. However, a process rarely considered in future sea-level rise scenarios is sudden (over minutes) land subsidence associated with great (>M8) earthquakes, which can exceed 1 m. Along the Washington, Oregon, and northern California coasts, the next great Cascadia subduction zone earthquake could cause up to 2 m of sudden coastal subsidence, dramatically raising sea level, expanding floodplains, and increasing the flood risk to local communities. Here, we quantify the potential expansion of the 1% floodplain (i.e., the area with an annual flood risk of 1%) under low (~0.5 m), medium (~1 m), and high (~2 m) earthquake-driven subsidence scenarios at 24 Cascadia estuaries. If a great earthquake occurred today, floodplains could expand by 90 km 2 (low), 160 km 2 (medium), or 300 km 2 (high subsidence), more than doubling the flooding exposure of residents, structures, and roads under the high subsidence scenario. By 2100, when climate-driven sea-level rise will compound the hazard, a great earthquake could expand floodplains by 170 km 2 (low), 240 km 2 (medium), or 370 km 2 (high subsidence), more than tripling the flooding exposure of residents, structures, and roads under the high subsidence scenario compared to the 2023 floodplain. Our findings can support decision-makers and coastal communities along the Cascadia subduction zone as they prepare for compound hazards from the earthquake cycle and climate-driven sea-level rise and provide critical insights for tectonically active coastlines globally.

California, Oregon, Washington↗
USGS2024

Effective site coefficients for the 2024 International Building Code (IBC)

The U.S. National Seismic Hazard Models (NSHMs), developed by the U.S. Geological Survey (USGS), have long been the scientific foundation of seismic design guidelines and have been used to compute design ground motions for construction of new buildings and retrofit of existing buildings in the United States and its territories. The 2018 NSHM is adopted by the 2024 International Building Code (IBC). Prior to the 2018 NSHM update, hazard calculations were required only at one reference site condition defined by V S30 =760 m/s (where V S30 is the time-averaged shear wave velocity from the surface to a depth of 30 m) and three periods (peak ground acceleration, PGA, and pseudo spectral accelerations at periods of 0.2 and 1 s, S s and S 1 ). Site coefficients, F PGA , F a , and F v , were then defined by the Building Seismic Safety Council (BSSC) Provisions Update Committee (PUC) in the site-specific procedures of National Earthquake Hazard Reduction Program (NEHRP) Recommended Seismic Provisions to calculate ground motions for other site classes with different V S30 values at the given periods. The design ground motions at other periods were then estimated using a generic spectral shape that was also defined by the BSSC PUC in NEHRP provisions. In recent years, the engineering community has realized there were deficiencies with the F a and F v site coefficients and the generic spectral shape. To avoid potentially dangerous underestimations of design ground motions for long period structures on soft site conditions in high seismicity regions, the BSSC PUC recommended the use of multi-period response spectra (MPRS) in 2017. As a result, the USGS produced multi-period and multi-V S30 response spectral values in the 2018 NSHM for calculations of design ground motions and the site coefficients F a and F v were eliminated from the 2020 NEHRP Provisions. As these site coefficients were widely used inside and outside of the United States, in this study we back-calculate the “effective” site coefficients F a,eff , and F v,eff by comparing MPRS for various site classes with the MPRS for the reference site condition, and discuss the changes that are observed in the 2024 IBC compared to its previous version in 2021. The effective site coefficients are presented for test site locations and their dependence on various factors including period, ground motion intensity, and regional models are discussed. Ratio maps between the new effective site coefficients and the old ones are then presented for soft site classes and for short and long periods. For soft site classes at short periods, the new effective site coefficients are lower than the old site coefficients for high seismicity regions and higher for low seismicity regions. As it was expected, for soft site classes at long periods and high seismicity regions, the new effective site coefficients are much larger than the old site coefficients without imposing the 50% increase as a penalty that was suggested in the 2021 IBC, whereas they could be much smaller if the 50% increase would have been imposed particularly around New Madrid and Charleston high seismicity regions. For low seismicity regions, the long period effective site coefficients can be smaller or larger by 20% compared to the 2021 IBC coefficients.

Conference Paper↗
USGS2024

A partially nonergodic ground-motion model for Fourier amplitude spectra for the San Francisco Bay area, California, USA

We develop a partially nonergodic ground-motion model (GMM) for Fourier amplitude spectra for the San Francisco Bay Area, California, USA, using the Bayless and Abrahamson (2019) GMM as a reference ergodic GMM and developing location-dependent adjustments to the predicted median and variance. We compile regional ground-motion data from moment magnitude (𝑀 w ) >3 earthquakes occurring during 2000–2022 for which magnitude information is available in the U.S. Geological Survey Comprehensive Catalog (Guy et al., 2015). The data set predominantly consists of records from 𝑀 w 3.5–4.5 earthquakes but includes three well-recorded 𝑀 w > 5 events. Ground-motion residuals are evaluated using the time-averaged shear-wave velocity in the top 30 m (𝑉 S30 ) from the California-specific map of Thompson et al. (2018) and basin-depth site parameters from the seismic velocity model of Aagaard and Hirakawa (2021). The 𝑉 S30 dependence and basin-depth scaling of the reference ergodic GMM of Bayless and Abrahamson (2019) are evaluated and modified with the updated data set. We compute maps of site adjustments using a varying-coefficient model that considers the spatial correlation structure and uncertainties at each observation location. The spatial covariance model is developed using ground-motion residuals that are standardized by the uncertainty model, which allows for consideration of the aleatory variability in developing the site adjustments. The covariance model is fit considering the means and standard deviations of the site terms at all locations. The use of partially nonergodic median adjustments results in modified variance components of the within-event variability. Due to the low number of large-magnitude earthquakes that control seismic hazard in the data set, we do not modify between-event variance; however, we present adjustments to site-to-site variability for use in partially nonergodic hazard assessments.

California↗