Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “NOAA Story Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

458 records · Page 12Linked to original sources
USGS2025

Land cover change within wetland complexes at Dixie Meadows, Churchill County, Nevada: 2015 – 2023

Dixie Meadows, Nevada, is a system of geothermal springs and seeps that feed a complex of marshes and wetland meadows that are located within lands managed by the Bureau of Land Management (BLM) and the Department of Defense (DOD). A previous U.S. Geological Survey report documented variability in satellite imagery-based land cover classifications for seven wetland complexes at near monthly time intervals between October 2015 and January 2022. This report presents additional data, extending analysis to November 2023. Land cover classifications between October 2015 and November 2023 demonstrated an association between vegetation cover characteristics and surface moisture, with Class 1 having dry, bare soil or sparse upland vegetation, Class 2 having moist, bare soil or sparse to small vegetation, Class 3 having dense green vegetation with potentially saturated soil conditions, Class 4 having a mix of shallow surface water, saturated soil, and dense green vegetation, and Class 5 having open surface water. Most of the wetland complexes occur close to spring outflows primarily within land managed by the DOD, though portions are also within BLM lands. The intervening and surrounding landscape outside of the wetland complexes assessed in this study are managed by the BLM. As a result, Class 1 land covers had the largest areal coverage for BLM managed lands. Classes 2 and 3 land covers were primarily mapped inside the wetland complexes and thus had the largest area coverage within DOD managed lands. Class 4 was almost exclusively mapped within the wetland complexes and thus was largely contained within DOD managed lands. Class 5 (open water) was exclusively mapped in and adjacent to a single wetland complex with catchment ponds on land managed by the BLM. The distribution of these land cover classes over the study period was seasonally and annually variable. Land cover areas of Classes 1 and 2 were larger during the spring months. Conversely, land cover areas of Classes 3 and 4 tended to be greatest during the summer or fall. These patterns might be influenced by differences in seasonal water sources and phenology.

Nevada↗
USGS2024

Evaluation of the lithium resource in the Smackover Formation brines of southern Arkansas using machine learning

Global demand for lithium, the primary component of lithium-ion batteries, greatly exceeds known supplies, and this imbalance is expected to increase as the world transitions away from fossil fuel energy sources. High concentrations of lithium in brines have been observed in the Smackover Formation in southern Arkansas (>400 milligrams per liter). We used published and newly collected brine lithium concentration data to train a random forest machine-learning model using geologic, geochemical, and temperature explanatory variables and create a map of predicted lithium concentrations in Smackover Formation brines across southern Arkansas. Using these predicted lithium maps with reservoir parameters and geologic information, we calculated that there are 5.1 to 19 million tons of lithium in Smackover Formation brines in southern Arkansas, which represents 35 to 136% of the current US lithium resource estimate. Based on these calculations, in 2022, 5000 tons of dissolved lithium were brought to the surface within brines as waste streams of the oil, gas, and bromine industries.

Arkansas↗
USGS2025

Exploration for blind geothermal systems in the eastern Great Basin of Utah: An update on the “Lund North” INGENIOUS detailed study site

Existing geothermal production in Utah is commonly collocated with surficial expressions of geothermal heat including active hot springs and hot spring deposits. However, geothermal potential across the Great Basin region is thought to be much higher for hidden or blind geothermal systems. Accordingly, exploration techniques that can locate geothermal resources that lack surface thermal features could support future development of these systems. The goal of the INGENIOUS project is to reduce exploration risk and discover new, economically viable hidden geothermal systems in the Great Basin region. This paper summarizes the efforts and preliminary results of blind geothermal resource prospecting in Utah as part of the larger INGENIOUS project. The Lund North site in the Basin and Range province of southwest Utah was designated as the fourth detailed study site for the project. The site was initially identified from the preliminary Play Fairway Analysis (PFA) geothermal favorability map, which is based on various data elements, and the identification of favorable structural settings across Utah. This site contains existing legacy data including a thermal gradient borehole with a heat-flow value exceeding 220 mW/m 2 . New data collected at this site include terrestrial gravity, magnetotellurics, transient electromagnetics, fluid geochemistry, geologic mapping, UAV-based lidar, paleomagnetism, aeromagnetic surveys, and a shallow temperature survey. Preliminary data and model interpretations corroborate the presence of a large, east-dipping, northeast-southwest-trending normal fault on the edge of a typical Basin and Range graben. Quaternary fault mapping refined by high-resolution lidar surveys suggests a complex step over fault geometry. Utilizing multi-disciplinary datasets for further site assessment at Lund North will facilitate the development of a local-scale PFA and geothermal conceptual model. This new data will be used to site successive thermal gradient drilling to verify heat flow with temperatures at depth at the Lund North site and further investigate the existence of a local geothermal system.

Utah↗
USGS2023

Stratigraphic notes—Volume 1, 2022

This is the first volume in the U.S. Geological Survey (USGS) series of reports on stratigraphy entitled “Stratigraphic Notes,” which consists of short papers that highlight stratigraphic studies, changes in stratigraphic nomenclature, and explanations of stratigraphic names and concepts used on published geologic maps. “Stratigraphic Notes” is a long-term (multiyear), multivolume publication containing articles that address updates or revisions to stratigraphic nomenclature (and whose content ultimately will be incorporated by National Geologic Map Database personnel into Geolex, https://ngmdb.usgs.gov/Geolex/ ). We welcome papers for the “Stratigraphic Notes” series from geoscientists of the USGS, of State Geological Surveys, and from academicians. Papers can be submitted for publication in “Stratigraphic Notes” by contacting the USGS Geologic Names Committee ( gnc@usgs.gov ). As new “Stratigraphic Notes” volumes are published, links to the volumes will be posted at https://doi.org/10.3133/pp1879 . This first volume ("Stratigraphic notes—Volume 1, 2022") includes articles that provide guidance for those who wish to submit papers to “Stratigraphic Notes,” as well as information on how to make your manuscripts compliant for geologic names reviews and how to organize your paper’s content to facilitate inclusion of new or revised names in Geolex. This volume also includes some specific guidance on conducting geologic names reviews of geologic and hydrogeologic reports.

Professional Paper↗
USGS2024

Perspectives on transportable array Alaska background noise levels

Background seismic noise fundamentally sets a lower bound on our ability to record signals arising from earthquakes. The background noise spectrum at a station is a combination of cultural noise, ocean-generated microseism noise, intrinsic instrument self-noise, and the sensitivity of the instrument to nonseismic noise sources. The USArray-Transportable Array Alaska deployed 195 stations across Alaska and parts of Canada (Yukon, British Columbia, and Northwest Territories). These stations were all installed using similar techniques and made use of instruments with similar self-noise levels. As such, this network provides an opportunity to look at how geographic location influences seismic background. Using these broadband stations, we report background noise levels from 0.2 to 75 s period in six discrete bands. By constructing “noise maps,” we depict both spatial and temporal changes in the background noise field. Using these maps, combined with targeted analysis, we infer sources and contributing factors to noise levels in these different period bands. These include cultural noise, the formation of sea ice, seasonal changes in permafrost and wave activity in the Gulf of Alaska, and magnetic field variability. We use this study as an opportunity to review several previous studies examining seismic noise in Arctic regions.

Book chapter↗
USGS2025

Total uncertainty quantification in inverse solutions with deep learning surrogate models

We propose an approximate Bayesian method for quantifying the total uncertainty in inverse partial differential equation (PDE) solutions obtained with machine learning surrogate models, including operator learning models. The proposed method accounts for uncertainty in the observations, PDE, and surrogate models. First, we use the surrogate model to formulate a minimization problem in the reduced space for the maximum a posteriori (MAP) inverse solution. Then, we randomize the MAP objective function and obtain samples of the posterior distribution by minimizing different realizations of the objective function. We test the proposed framework by comparing it with the iterative ensemble smoother and deep ensembling methods for a nonlinear diffusion equation with an unknown space-dependent diffusion coefficient. Among other applications, this equation describes the flow of groundwater in an unconfined aquifer. Depending on the training dataset and ensemble sizes, the proposed method provides similar or more descriptive posteriors of the parameters and states than the iterative ensemble smoother method. Deep ensembling underestimates uncertainty and provides less-informative posteriors than the other two methods. Our results show that, despite inherent uncertainty, surrogate models can be used for parameter and state estimation as an alternative to the inverse methods relying on (more accurate) numerical PDE solvers.

Journal of Computational Physics↗
USGS2026

Deformed submarine terraces in Puget Sound, Pacific Northwest, indicate only one M >~7.5 earthquake on the Seattle fault zone in the past 11,000 yr

Submerged marine terraces in Puget Sound, deformed across the Seattle fault zone (SFZ), indicate that only one earthquake as large as M~7.5 has occurred in at least the past 11 kyr. Previous paleoseismic studies document a M~7.5 earthquake between 923–4 CE, which uplifted coastal marine terraces by as much as 8 m. We demonstrate that this earthquake was the only such event since ~11 ka by mapping and quantifying deformation of older marine terraces, now submerged in Puget Sound. The submerged terraces, attributed to a late-glacial sea-level lowstand, record both glacial isostatic rebound and tectonic deformation. Vertical offset of the ~11 ka terraces within the SFZ is comparable to that of the marine terraces uplifted in 923 CE, implying no additional large (M>~7.5) earthquake on the SFZ since ~11 ka. This result implies a longer recurrence interval than current hazard estimates, which assumes recurrence of M>7.1 events every 5 kyr. Our mapping of SFZ deformation since ~11 ka also supports fault segmentation and contiguous block uplift between the Seattle and Tacoma fault zones.

Washington↗
USGS2024

Greater sage-grouse habitat of Nevada and northeastern California—Integrating space use, habitat selection, and survival indices to guide areas for habitat management

Executive Summary Greater sage-grouse populations ( Centrocercus urophasianus ; hereafter sage-grouse) are threatened by a suite of disturbances and anthropogenic factors that have contributed to a net loss of sagebrush-dominant shrub cover in recent decades. Declines in sage-grouse populations are largely linked to habitat loss across their range. A key component of conservation and land use planning efforts for sage-grouse involves the continued monitoring and modeling of habitat requirements and suitability across its range. The Bureau of Land Management (BLM) is addressing the management of sage-grouse habitats on BLM-authorized public lands throughout the western United States through a land use planning amendment and associated environmental impact statement (86 FR 66331). More than 25 percent of the range-wide distribution of sage-grouse is within Nevada and northeastern California, and information on sage-grouse distribution and habitat requirements is important to guide appropriate management decisions. Therefore, the BLM has identified the need for updated spatially explicit information on sage-grouse habitat in Nevada and northeastern California to guide the land use planning amendment and associated management decisions. To address this need, researchers with the U.S. Geological Survey, in close cooperation with multiple State and Federal resource agency partners, including BLM, Nevada Department of Wildlife (NDOW) and California Department of Fish and Wildlife (CDFW), sought to map sage-grouse distribution and produce example habitat designations in these states. Herein, we report results of our primary study objective, which was to map sage-grouse habitat and create example habitat management areas, based on more than a decade of location and survival data collected from marked sage-grouse across the study region coupled with lek count survey data managed by the NDOW and the CDFW. We expanded on previously developed methodology to incorporate information on habitat selection and survival during reproductive life stages and specific seasons with updated sage-grouse location and known fate datasets, while also including brood-rearing areas that are understood to be threatened and important for population persistence. We combined predictive habitat map surfaces for each life stage and season with updated information on current occupancy patterns to classify habitat based on its suitability and probability of occupancy. We carried out additional steps to delineate specific example habitat management areas, specifically (1) incorporated corridors connecting key nesting and brood-rearing habitat, (2) corrected outputs for pre-wildfire habitat conditions within areas burned in the last 16 years, and (3) masked out areas of anthropogenic development. Our methodological example of deriving habitat management areas was intended to help inform decisions by BLM and other land managers regarding conservation and management of sage-grouse. Associated data products in the form of habitat maps provide updated, detailed, and comprehensive information about the status of habitats and can be useful to partner agencies in their efforts to designate and rank habitats for this species of high conservation concern in Nevada and California, with full recognition that on-the-ground field data and local sources of information and expertise should be used in conjunction with inferences from these models.

California, Idaho, Nevada↗
USGS2024

Classification of lakebed geologic substrate in autonomously collected benthic imagery using machine learning

Mapping benthic habitats with bathymetric, acoustic, and spectral data requires georeferenced ground-truth information about habitat types and characteristics. New technologies like autonomous underwater vehicles (AUVs) collect tens of thousands of images per mission making image-based ground truthing particularly attractive. Two types of machine learning (ML) models, random forest (RF) and deep neural network (DNN), were tested to determine whether ML models could serve as an accurate substitute for manual classification of AUV images for substrate type interpretation. RF models were trained to predict substrate class as a function of texture, edge, and intensity metrics (i.e., features) calculated for each image. Models were tested using a manually classified image dataset with 9-, 6-, and 2-class schemes based on the Coastal and Marine Ecological Classification Standard (CMECS). Results suggest that both RF and DNN models achieve comparable accuracies, with the 9-class models being least accurate (~73–78%) and the 2-class models being the most accurate (~95–96%). However, the DNN models were more efficient to train and apply because they did not require feature estimation before training or classification. Integrating ML models into benthic habitat mapping process can improve our ability to efficiently and accurately ground-truth large areas of benthic habitat using AUV or similar images.

Michigan, Wisconsin↗
USGS2026

Use of precariously balanced rocks to constrain postglacial earthquake magnitudes in New England, United States

We use the age and fragility of 13 precariously balanced rocks (PBRs) in Massachusetts, New Hampshire, and southwestern Maine to evaluate the estimated probabilistic seismic hazard (PSH) from the U.S. Geological Survey’s National Seismic Hazard Model (NSHM), and also develop a map of maximum postglacial earthquake magnitudes in the region. The PBRs are erratic boulders left behind by the retreat of the Laurentide ice sheet between 13 and 18 ka, and published ice retreat maps are used to estimate their fragility ages. The fragilities and ages of the rocks appear to be consistent with the NSHM, in that the estimated earthquake magnitudes and resulting ground motions that would topple them are only expected on timescales longer than their fragility ages. This result, on the North American passive margin, contrasts with PBR studies at active plate boundaries, where the PBR constraints imply large reductions to estimated PSH. It may be that the PBRs are not old enough in the eastern United States to reveal the same PSH modeling issues as those revealed in the plate boundary settings. The study provides constraints on maximum magnitudes of postglacial earthquakes across much of Massachusetts, New Hampshire, and southwestern Maine, with the constraints limited to the ages of the PBRs.

Maine. Massachusetts, New Hampshire↗
USGS2024

StreamStats—A quarter century of delivering web-based geospatial and hydrologic information to the public, and lessons learned

StreamStats is a U.S. Geological Survey (USGS) web application that provides streamflow statistics, such as the 1-percent annual exceedance probability peak flow, the mean flow, and the 7-day, 10-year low flow, to the public through a map-based user interface. These statistics are used in many ways, such as in the design of roads, bridges, and other structures; in delineation of floodplains for land-use zoning and setting of insurance rates; for regulatory purposes, such as the permitting of wastewater discharges; and for hydrologic and climate change studies. StreamStats was first developed for Massachusetts and released in 2001. The application provided users with the ability to obtain streamflow statistics computed from data collected at USGS streamgages and to obtain estimates of streamflow statistics for user-selected ungaged sites. Massachusetts StreamStats used geographic information system software and digital mapping to compute drainage-basin characteristics, which were then used in statistical models to estimate streamflow statistics for the user-selected sites. The statistical models were in the form of equations that were developed through a process known as regression analysis. StreamStats was the first known web application with the ability to do interactive geoprocessing. The utility of Massachusetts StreamStats was instantly apparent, leading the USGS to develop a version of StreamStats that could be implemented nationally. USGS State offices normally were required to develop custom regression equations and prepare local digital mapping data needed for implementing StreamStats for their States. Funding needed to complete this work usually was provided through cooperative agreements between the USGS and State agencies. In 2004, Idaho became the first to be released in the national version of StreamStats. By 2023, 44 States were fully implemented and six were undergoing implementation. StreamStats has undergone many modifications over the years to keep up with changes to the underlying software and to add functionality. Customized functionality and separate linked StreamStats applications were developed for several States. Meeting the high demand for additions and improvements to StreamStats while also adhering to budgetary constraints has, at times, been challenging. The StreamStats development team has identified numerous additional improvements that could be made to provide better performance and more functionality. The lessons learned from the experience of building and operating StreamStats for nearly 25 years could be relevant to others interested in pursuing efforts of a similar scale.

Circular↗
USGS2025

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California↗
USGS2026

Evaluation of stream capture related to groundwater pumping, middle Humboldt River Basin, Nevada

Historical, future, and potential stream capture from groundwater pumping in the middle Humboldt River Basin (MHRB), Nevada, is estimated using a calibrated numerical groundwater flow model. The model was developed to estimate (1) stream capture, which is the change in flux between the groundwater system and the Humboldt River and tributaries, and (2) change in streamflow, which is the change in streamflow estimated for the Imlay gage on the Humboldt River (U.S. Geological Survey streamgage 10333000). Historical stream capture for water years (WYs) 1961–2015 is estimated using recorded and estimated groundwater pumping during that period. Future (predictive) stream capture was based on historical stresses (WYs 1961–2015) using a scenario that simulated non-mine pumping from WY 2015 at a uniform rate for 100 years into the future. Potential stream capture throughout the middle Humboldt River Basin from groundwater pumping during varying durations of time are presented in a series of capture maps. Maps also are presented that show the potential to capture from groundwater evapotranspiration, as well as the storage changes for pumping duration of 100 years. Estimates of historical stream capture from the mainstem Humboldt River during the early 1960s are less than 400 acre-feet per year (acre-ft/yr) when groundwater withdrawals and pumping rates were relatively small compared to more recent times. In the late 1980s and early 1990s, groundwater withdrawals increased and estimated historical stream capture also increased from about 4,000 acre-ft/yr in the late 1980s and early 1990s to as much as 18,800 acre-feet (acre-ft) in WY 1998. In WY 2015, estimated historical stream capture declined to about 13,000 acre-ft because of decreasing groundwater withdrawals and lower streamflow during the drought of WYs 2012–15, resulting in less stream water available for capture. Stream capture was estimated for 100 years into the future based on WY 2015 non-mine pumping rates and mine-dewatering activity through WY 2015. Stream capture is forecast to increase to about 23,000 acre-ft/yr, and streamflow in the Humboldt River could decrease by as much as 19,000 acre-ft/yr. Pumping for mine-dewatering and the associated discharge of that water affects streamflow in the Humboldt River at Imlay, Nevada (U.S. Geological Survey streamgage 10333000). Historically, from WYs 1991 to 2015, streamflow was greater at Imlay gage during active mine-dewatering from mine-water discharge operations and increased by as much as 105,000 acre-ft in WY 1998. The increase was attributed mostly to the discharge of groundwater from mine-related dewatering operations directly into the mainstem Humboldt River or its tributaries, with some of this increase associated with return flows from discharge to rapid infiltration basins. Results indicate that streamflow at Imlay gage is expected to decrease by as much as 1,600 acre-ft/yr 30 years after mine-related pumping and discharge are discontinued. The streamflow reductions at the Imlay gage are expected to then decrease to around 500 acre-ft/yr, 100 years after mine-related pumping and discharge are discontinued. Potential capture maps were produced for pumping durations of 10, 25, 50, and 100 years. Capture map results indicate that areas of greater potential stream capture occur adjacent to the Humboldt River and for upstream tributaries areas north of the Humboldt River.

Nevada↗
USGS2026

The damability function: A probabilistic approach to regional landslide dam susceptibility analysis applied to the Oregon Coast Range, USA

Landslides can dam rivers and require rapid response to mitigate catastrophic outburst floods. Here, we present a workflow to map landslide dam formation susceptibility at a regional scale. We define a probabilistic function that combines river valley width and landslide volume to efficiently determine the likelihood of a landslide dam or “damability”. We combine damability values with landslide susceptibility to estimate landslide dam susceptibility. The valley width measurements are automated using a new elevation threshold-based algorithm. Landslide volume is represented as a statistical distribution from mapped landslides. We validate and apply our approach to the Oregon Coast Range, USA and find that 36 % of river stretches exceed a dam potential threshold; these are in river headwaters and steeper terrain, which in this case correlate with more resistant lithologies. We also estimate volumes of the potential dammed lakes and find that most rivers with high dam susceptibility are less likely to impound large lakes because they have low drainage areas. However, widespread susceptibility, and the potential impacts from exceptionally large landslides, suggest that this hazard should be considered in the Pacific Northwest. The damability function workflow can ingest new data and be applied more broadly to assess future landslide dam hazards.

Oregon↗
USGS2023

Reconnaissance basement geology and tectonics of North Zealandia

New rock dredge samples supply key information to establish the tectonic and geological framework of the northern two-thirds of the 95% submerged Zealandia continent. The R/V Investigator voyage IN2016T01 to the Fairway Ridge, Coral Sea, obtained poorly sorted poly-lithologic pebbly to cobbly sandstones, well sorted fine grained sandstones, mudstones, bioclastic limestones, and basaltic lavas. Post-cruise analytical work comprised petrography, whole rock geochemical and Sr and Nd isotopic analyses, and U-Pb zircon, Rb-Sr, and Ar-Ar geochronology. A Fairway Ridge cobbly sandstone has a ∼95 Ma (early Late Cretaceous) depositional age; two biotite granite cobbles are 111 ± 1 and 128 ± 1 Ma in age, and some volcanic pebbles are also likely Early Cretaceous. Fairway Ridge basalts have intraplate alkaline chemistry and are of Late Eocene age (∼40–36 Ma). By analogy with South Zealandia, we interpret strong positive continental magnetic anomalies of North Zealandia to mainly result from Late Cretaceous to Cenozoic intraplate basalts, many of them rift-related lavas. A new basement geological map of North Zealandia shows the position of the Mesozoic Gondwana magmatic arc axis (Median Batholith) and other major geological units. This study completes onland and offshore reconnaissance geological mapping of the entire 5 Mkm 2 Zealandia continent.

Tectonics↗
USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗
USGS2025

Late Pleistocene kinematics of the Great Southern Puerto Rico Fault Zone, Puerto Rico

Several onshore faults in southern Puerto Rico have recently been recognized as Quaternary active. However, the kinematics of these faults, particularly any lateral component, remain largely unconstrained. It is difficult to characterize low strain‐rate faults, partially due to extensive erosional and anthropogenic landscape modification, steep relief, and frequent landsliding, limiting the preservation of geomorphic features that could serve as recorders of fault motion. Here, we constrain the kinematics along sections of the Great Southern Puerto Rico Fault Zone (GSPRFZ) on the southern coastal plain of Puerto Rico. We integrate ∼1‐m‐resolution light detection and ranging (lidar)‐derived topography, historical air photos, and field mapping to identify a series of ∼50–1200‐m‐long fault scarps and lineaments that trend northwest–southeast and extend for ≥25 km across the southern coastal plain. Fault scarps are primarily south facing, cut across topography, and displace Quaternary deposits and landforms. We document multiple offset geomorphic markers, including channel thalwegs and interfluves formed in deposits previously mapped as Quaternary piedmont alluvial plain. We observe both vertical (south‐side‐down) and right‐lateral meter‐scale displacements, which indicate that the GSPRFZ accommodates right‐lateral oblique motion in the late Pleistocene, consistent with northeast motion of the Puerto Rico and the Virgin Islands microplate away from the Hispaniola block.

Puerto Rico↗
USGS2025

The effects of line simplification on planform geometry

Data on maps should retain accuracy regardless of scale. Yet, as cartographic lines are generalized, there can be impacts on properties such as topology, density, and planform geometry. Here, we investigate the use of the Scale Specific Sinuosity (S3) metric (Stanislawski et al., 2023) to evaluate the effects of line simplification on planform geometry, which is the bends of streams in map view. We employ an open-source Python S3 workflow to characterize the geometry of five diverse stream channels in the United States. The original data are extracted from the U.S. Geological Survey National Hydrography Dataset 1:24,000-scale vector data (U.S. Geological Survey, 2000) (Table 1), and the simplification is done using the Visvalingam and Whyatt method (2017) with a simplification tolerance of 0.5, 1.0, 1.5, and 2.0 km. The S3 analysis is calculated at each level of simplification and S3 derivatives are generated. Derivatives include measures of sinuosity, fractal dimension, and the dominant bend wavelength. The findings show that the change in planform geometry is scale-dependent, though simplification will have little effect on straighter lines. The change becomes more apparent in complex lines as the degree of simplification aligns with the scale of the dominant bend geometries. These logical conclusions are evidence that the S3 is a useful metric for automated characterization of bend geometry regardless of line complexity.

Conference Paper↗