Geology ReportsSearch

SEARCH · Geology Reports

Results for “Journal of Aquatic Animal Health”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 12Linked to original sources

Validating antler- and movement-based estimates of caribou reproduction using video camera collars

Wildlife agencies invest substantial resources in monitoring ungulate reproductive rates given ongoing concerns about population trends and their implications for management. For barren-ground caribou ( Rangifer tarandus ) in the North American Arctic, data on parturition and neonate survival have traditionally been collected using visual observations of antler retention and calf presence from small, fixed-wing aircraft. However, these surveys are weather-dependent, expensive, and dangerous, motivating the development of movement-based approaches that infer reproductive events from global positioning system (GPS) location data. We had the unique opportunity to use video camera collars to validate both antler- and movement-based methods for estimating reproduction in barren-ground caribou, using data from the Porcupine (2018–2023) and Western Arctic (2021, 2023) herds in Alaska, USA, and Yukon, Canada. For the movement-based approaches, we assessed individual-based and population-based methods, which both inferred parturition following a sharp decline in movement and inferred calf loss following a sharp increase in movement. We investigated these approaches using rarified 1-, 2-, 4-, and 8-hour fix intervals. Based on video collar observations, we found that antler retention at the onset of the calving period was highly accurate for predicting parturition (96% accuracy) but became unreliable as calving progressed, as approximately 80% of parturient females shed their antlers during the calving period. In contrast, both movement methods performed marginally for estimating caribou parturition (~70% accuracy), with estimates from the individual-based method exhibiting greater bias than those from the population-based method. The individual-based method also poorly predicted neonate survival (≤49% accuracy for detecting parturition and calf fate for the Porcupine Herd). Video data revealed that inaccuracies with the movement methods often occurred when caribou bedded during storms, rested after traversing mountainous terrain, lost a calf shortly after birth, or increased movement to evade insects. These results have important implications for management agencies using antler- and movement-based methods to estimate caribou reproduction, particularly when informing assessments of population decline or recovery. Our results demonstrate the utility of video collar data for validating reproductive monitoring approaches and provide insights into how these approaches can be improved.

Alaska, Yukon

Overstorey mortality promotes juvenile piñon pine growth during favourable weather at cooler, wetter sites

Hotter droughts have resulted in widespread tree die-off events globally, frequently leading to regeneration failure. Dry forest recovery often depends on the growth and survival of extant juvenile trees. However, it is unclear how microenvironmental changes following overstorey tree die-off affect juvenile trees, particularly in dryland systems where tree recruitment is typically limited by water availability and heat stress. We simulated an overstorey tree die-off event by girdling trees in piñon-juniper woodlands across the south-western United States. We sampled juvenile piñon pine growth from live and dead overstorey treatments across six study sites spanning a regional latitudinal gradient and local elevational gradients. We examined how juvenile branch and needle growth differed between live and dead overstorey treatments, and whether responses varied with weather conditions and juvenile tree size following overstorey mortality. We found greater juvenile branch and needle growth under dead compared with live overstorey trees for 2 years following overstorey mortality at mid- and high-elevation sites which are typically cooler and wetter than the other sites. These observed growth releases were contingent on favourable post-mortality weather conditions. Higher growth under dead overstorey occurred at sites experiencing near-average climatic water deficits compared with sites experiencing above-average climatic water deficits. Growth at all sites increased from the first to second year after overstorey mortality. Across sites, growth was unrelated to juvenile tree size. Synthesis . Our results underscore differentiation in juvenile responses to overstorey tree die-off driven by local site conditions and weather across the range of Pinus edulis . Overstorey mortality resulted in consistently higher juvenile growth only at climatically favourable sites and during favourable weather, while unmeasured microsite differences could help account for variation observed at the hottest and driest site. Results from less climatically favourable sites suggest that overstorey trees neither directly limit nor facilitate juvenile growth, though further study over longer timeframes is needed to resolve the pace and magnitude of potential recovery or decline. Overall, juvenile vigour may be promoted following overstorey mortality only in a narrow spatial (site) and temporal (weather) environmental context, suggesting additional vulnerabilities for piñon populations under more arid conditions.

Arizona, Colorado

A conceptual framework to assess post-wildfire water quality: State of the science and knowledge gaps

Wildfire substantially alters aquatic ecosystems by inducing moderate to catastrophic physical and chemical changes. However, the relations of environmental and watershed variables that drive those effects are complex. We present a Driver-Factor-Stressor-Effect (DFSE) conceptual framework to assess the current state of the science related to post-wildfire water-quality. We reviewed 64 peer-reviewed papers using the DFSE framework to identify drivers, factors, stressors, and effects associated with each study. A total of five drivers were identified and ranked according to their frequency of occurrence in the literature: atmospheric processes > fire characteristics > ecologic processes and characteristics > land surface characteristics > soil characteristics. Commonly reported stressors include increased nutrients, runoff, and sediment transport. Furthermore, although several different factors have been used at least once to explain water-quality effects, relatively few factors outside of precipitation and fire characteristics are frequently studied. We identified several gaps indicating the need for long-term monitoring, multi-factor studies, consideration of organic contaminants, consideration of groundwater, and inclusion of soil characteristics. This assessment expands on other reviews and meta-analyses by exploring causal linkages between influential variables and overall effects in post-wildfire watersheds. Information gathered from our assessment and the framework itself can be used to inform future monitoring plans and as a guide for modeling efforts focused on better understanding specific processes or to mitigate potential risks of post-wildfire water quality.

Water Resources Research

Rare earth element-mineralized carbonatite in the Bear Lodge Alkaline Complex, USA—Ore genesis implications from fluid inclusion characterization

Rare earth element (REE) resources of the Bear Lodge Alkaline Complex, Wyoming, are hosted in variably leached carbonatite spatially related to diatreme breccia pipes. We investigated the genesis of REE and lesser-known gold resources through fluid inclusion analysis of carbonatite, fluorite breccia, and smoky quartz vein samples. Physicochemical characteristics of inclusion-trapped fluids were evaluated using petrography, microthermometry, Raman spectroscopy, decrepitate mound analysis, energy-dispersive spectroscopy, laser ablation inductively coupled plasma mass spectrometry, and noble gas isotope analysis. Microthermometry results reveal three fluid types that affected carbonatite dikes within deeper zones that escaped near-surface, ore-grade REE enrichment: (1) high-temperature (330–432°C) magmatic fluid captured in fine-grained calcite; (2) REE-enriched alkali bicarbonate-sulfate brine; and (3) low-temperature (117–182°C) diluted magmatic or meteoric water. Multiphase brine-like inclusions contain burbankite, nahcolite, strontianite, celestine and alkali sulfate daughter crystals, linking them to early burbankite mineralization. Peripheral smoky quartz and fluorite occurrences at Smith Ridge, 1.5 km from the central carbonatite dike swarm, contain primary inclusions that are Cl-poor and rich in Na-HCO 3 -SO 4 , similar to secondary and pseudosecondary inclusions in carbonatites. Helium isotopes reveal a MORB-like source for carbonatite samples and an older crust signature at Smith Ridge, consistent with the proximal ridge-top exposures of Archean granite. Results from this fluid inclusion study coupled with previous studies of carbonatite mineral paragenesis, show that light REEs (LREEs) were not mobilized great distances. Instead, burbankite crystallized within carbonatite from alkali bicarbonate fluids. With sodium retained in early burbankite, outward-emanating fluids enriched in potassium relative to sodium (higher K:Na) resulted in potassium–ferric iron metasomatism of silicate host rocks. This alkali fractionation was accompanied by fractionation of LREEs and heavy REEs (HREEs), with LREEs dominating the central carbonatite resources. In contrast, areas of peripheral REE mineralization at Bear Lodge are commonly characterized by higher HREE:LREE ratios. The K:Na ratio of associated fenites or alteration assemblages could be indicative of early crystallized burbankite in carbonatites and REE fractionation processes potentially leading to areas of concentrated HREEs with greater supply vulnerabilities.

South Dakota, Wyoming

Rare earth element potential in coal and coal ash in the U.S. Gulf Coast

United States heavy reliance on imports of critical minerals (CMs), including rare earth elements (REEs), underscores the importance of development of domestic sources. The study objective was to quantify CM and REE concentrations in coal and coal ash in the US Gulf Coast region. CM and REE concentrations were measured for 118 samples from outcrops and 14 mines in the Gulf Coast. Results show that total REE + Yttrium (REY) concentrations (dry coal basis) are comparable to those of the upper continental crust (UCC) with localized hot spots, such as the Texas Gibbons Creek mine (REY ≤ ~ 2860 ppm). When normalized to UCC REY concentration (169 ppm, dry coal basis), REY to UCC ratios for Gulf Coast coal samples range from 0.1 to 17 (median ratio 0.6). REE extractability from lignites is high (median: 63%–93%) using environmentally benign weak acid. In addition to raw coal, coal ash from power plants could also serve as an REE source with a median ratio of REY in ash relative to coal of 4; however, extractability from coal ash is generally much lower (≤ 5% using the same weak acid as in coal). The median basket price for extracted REY as oxides from coal, assuming 70% extractability, is $3.2 per tonne of coal and $186 billion based on 58 billion metric tonnes of dry coal in the Gulf Coast. REEs important for magnets (Pr + Nd + Tb + Dy) account for ~ 80% of the total value. The corresponding median basket price for extracted REY as oxides from coal ash, assuming ~ 30% extractability, is ~$4.4 per tonne of ash and $1.2 billion based on 258 million tonnes of ash. REE production from coal would likely require co-products, such as activated carbon or humic acids, to attain economic viability. Production of REEs from coal ash could offset remediation costs related to potential water contamination. This reconnaissance study shows the potential for REE production from coal and coal ash in the Gulf Coast; however, carbon coproducts and/or societal benefits would likely be required for socioeconomic viability.

Alabama, Florida, Louisiana, Mississippi, Texas

Linking distribution and return-on-investment models to optimize woody management for prairie grouse in Nebraska

Grasslands in Nebraska, USA, face threats from agricultural conversion, urban development, and woody encroachment, all of which negatively affect prairie grouse ( Tympanuchus spp.) populations. To optimize conservation planning, Nebraska wildlife agencies developed probabilistic area-based surveys for greater prairie-chicken ( T. cupido ) and sharp-tailed grouse ( T. phasianellus ) to sample landscapes across a range of environmental conditions. This design improves historical surveys and enables the development of distribution models that quantitatively define habitat associations and support scenario-based conservation planning. Using survey data collected during 2020–2022, we modeled prairie grouse occurrence and abundance as functions of land cover, topography, and climate using Bayesian logistic and zero-inflated negative binomial models with regularized horseshoe priors. We then conducted a maximum potential return-on-investment analysis of woody cover treatments, assuming sustained treatment success, relative to projected impacts of woody encroachment on prairie grouse populations by 2050. Among modeled associations were a positive association with grasslands having low woody cover and a negative association with grasslands having high woody cover. Across the 3-year period, median estimated annual populations were 142,380 for greater prairie-chicken (range of 95% CIs across years = 68,821–277,615) and 64,154 for sharp-tailed grouse (range of 95% CIs across years = 27,550–146,559). Under projected woody encroachment, mean predicted population declines were 10% for greater prairie-chicken (range of 95% CIs = 7–14%) and 6% for sharp-tailed grouse (range of 95% CIs = 5–7%). Areas with high prairie grouse density and low treatment costs in 2021, and high projected woody encroachment and population loss by 2050, offered the greatest return on investment for woody management. Return on investment was greatest in the northwestern Shortgrass Prairie ecoregion (northwestern Nebraska) for sharp-tailed grouse and the eastern Sandhills ecoregion (central Nebraska) for both species. These models underscore the value of evidence-based, quantitative approaches for prioritizing conservation actions on working lands. Scenario-based modeling could be extended to guide other treatments, such as optimizing restoration (e.g., Conservation Reserve Program) or incentivizing grassland persistence in areas with predicted climate resilience.

Nebraska

The addition of 144Nd atomic mass to routine ICP-MS analysis as a Quick Screening Tool for Approximating Rare Earth Elements (Q-STAR) in natural waters

Rare earth elements (REEs) are a class of critical minerals, all of which can have supply chain vulnerability that impacts economic security. These elements are widely measured in environmental matrices via inductively coupled plasma mass spectrometry (ICP-MS); however, successful quantification can require time-consuming, sample-specific optimization. While a sample-by-sample approach is appropriate for targeted quantification studies, this approach is not suitable for mineral exploration efforts where rapidly screening thousands of samples for the presence of REEs is desired. Here, we demonstrated the use of a Quick Screening Tool for Approximating REEs (Q-STAR) to detect REEs in surface water and groundwater matrices, collected as part of existing environmental studies. A mass-to-charge ratio of 144 ( m / z = 144) was added to an ICP-MS method to screen for REEs in filtered water samples submitted for metals analyses to the U.S. Geological Survey (USGS) National Water Quality Laboratory. We detected the presence of REEs above a reference threshold of 1200 counts per second in 18 % of pre-selected 6626 samples. Using this screened dataset, we mapped estimated dissolved REE concentrations across the United States in relation to ecoregions and underlying geology. Data are constrained to where sample collection took place but nevertheless show estimated aqueous dissolved REE concentrations on a geographic scale that has not yet been studied. To validate Q-STAR, REEs were measured in a USGS standard reference sample, a subset of 88 archived filtered water samples, and in fresh filtered surface water samples. Our targeted analyses demonstrated a strong linear relationship between Q-STAR predicted and measured values in all archived samples for Nd (r 2 = 0.94), and light REEs (LREEs) such as lanthanum (La) (r 2 = 0.93), praseodymium (Pr) (r 2 = 0.94) and samarium (Sm) (r 2 = 0.94). Using Q-STAR screen values, nine field sites were identified and surface water samples recollected to confirm the continued presence of Nd and LREEs. Q-STAR can be used to screen an unlimited number of water samples for the presence of REEs prior to time-intensive and costly quantitative analyses and to generate large REE datasets for further investigation.

Journal of Geochemical Exploration

Evaluation of solid bitumen created from marine oil shale bituminite under hydrous and anhydrous pyrolysis conditions

To test the influence of environmental conditions on aromaticity of solid bitumen generated during petroleum generation, four organic-rich (26–36 wt% total organic carbon) oil shale samples collected from the Neoproterozoic–Lower Cambrian restricted marine Salt Range Formation in the upper Indus Basin, Pakistan, were pyrolyzed under hydrous and anhydrous conditions. Experiments used closed system batch reactors at subcritical water temperatures between 300 and 370°C for 72 h. Thermal conversion of bituminite in the Salt Range oil shales created a newly formed solid bitumen, similar to previous observations from experiments on the Eocene lacustrine Green River Formation Mahogany zone oil shale. Newly formed solid bitumen in the Salt Range Formation oil shales generally has higher reflectance (R o ) in hydrous residues compared to anhydrous experiments subjected to the same time-temperature conditions, also similar to prior observations. This finding supports the hypothesis that radical disproportionation is favored in the presence of hydrogen contributed by water, promoting aromatization in the solid bitumen residue with concomitant increased expulsion of saturated hydrocarbons. Indigenous solid bitumen (and vitrinite in a comparison sample) also shows higher reflectance values in hydrous versus anhydrous residues, indicating that additional aromatization in the presence of exogenous hydrogen occurs both in newly formed organic matter and in organic matter that is present throughout the experiment. Despite similarities in their bulk rock geochemical screening parameters, R o evolution shows different trajectories amongst the four Salt Range oil shales, suggesting as-yet undetermined differences in kinetic properties which are probably related to differences in a priori chemical composition. These results have implications for the use of solid bitumen reflectance (BR o ) as a thermal proxy, suggesting BR o values and appearance could vary as a function of the concentration of water. Variation in water concentration may be present at the reservoir or formation scale, but may also be present at a much finer scale in tight oil shales where permeability is several orders of magnitude lower than conventional reservoirs. Therefore, local variations in the presence of water potentially could explain substantial variation in BR o values and appearance in closely spaced source rock samples and even within an individual microscope field.

Journal of Analytical and Applied Pyrolysis

The role of bedrock circulation depth and porosity in mountain streamflow response to prolonged drought

Quantitative understanding is lacking on how the depth of active groundwater circulation in bedrock affects mountain streamflow response to a multi‐year drought. We use an integrated hydrological model to explore the sensitivity of a variety of streamflow metrics to bedrock circulation depth and porosity under a plausible extreme drought scenario lasting up to 5 years. Endmember depth versus hydraulic conductivity relationships and porosity values for fractured crystalline rock are simulated. With drought, a deeper circulation system with higher drainable porosity more effectively buffers minimum flow and significantly limits perennial stream loss in comparison to a shallow circulation system. Streamflow buffering is accomplished through extensive groundwater storage loss. However, deeper circulation systems experience prolonged recovery from drought in comparison to storage‐limited shallow systems. Research highlights the importance of characterizing the deeper bedrock hydrogeology in mountainous watersheds to better understand and predict drought impacts on stream ecosystem health and water resource sustainability.

Colorado

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia

Identifying precursors and tracking pulses of magma ascent in multidisciplinary data during the 2018–2023 phreatomagmatic eruption at Semisopochnoi Island, Alaska

The 2018–2023 phreatomagmatic eruptions at Semisopochnoi Island, Alaska produced abundant long-period (LP) seismicity, harmonic and broadband tremor, and explosion signals over several well-monitored periods of eruption and quiescence. The corresponding dataset provides an excellent opportunity to investigate precursory and syn -eruptive geophysical signals of long-lived phreatomagmatic eruptions using multiparameter observations. We generated explosion and LP event catalogs through novel implementations of the REDPy ( Hotovec-Ellis, 2024 ) repeating event detector in mid-2021 following a network upgrade and the onset of a new phase of the eruption. The hundreds of detected explosions show a high degree of infrasound waveform similarity over more than a year, indicating a repeating source mechanism likely associated with explosive magma-water interaction. The seismic LP catalog shows that events began over a month prior to renewed explosive activity at the beginning of August 2021, and that lower frequency index (FI) LPs were generated in the week prior to the onset of explosions. We applied a recently developed machine learning tool (VOISS-Net, Tan et al., 2024 ) to catalog abundant broadband and harmonic seismic tremor recorded before and during the renewed explosive activity, along with LPs and explosions. The tremor catalogs complement the LP and explosion catalogs by filling out the seismic sequence with the dominant signal types. Together, these catalogs reveal a seismic sequence of renewed unrest that started with several weeks of LP events, followed by LPs with lower FI values and harmonic tremor in the days prior to explosive activity, and finally the onset of discrete explosions and broadband eruption tremor. We interpret this sequence as the ascent of a new pulse of magma that first interacted with the hydrothermal/groundwater system to produce LPs, followed by harmonic tremor, and that ultimately drove explosive magma-water interactions and periods of continuous ash emissions. The 2021 seismic sequence, in combination with long-term records of satellite SO 2 emissions, deformation from interferometric synthetic aperture radar (InSAR) analysis, ash sample analysis, infrasound, and volcano tectonic seismicity, allows us to interpret the entire 9-year period of unrest and eruption that began with an intrusion and earthquake swarm in 2014.

Alaska

Will there be water? Climate change, housing needs, and future water demand in California

Climate change in California is expected to alter future water availability, impacting water supplies needed to support future housing growth and agriculture demand. In groundwater-dependent regions like California's Central Coast, new land-use related water demand and decreasing recharge is already stressing depleted groundwater basins. We developed a spatially explicit state-and-transition simulation model that integrates climate, land-use change, water demand, and groundwater gain-loss to examine the impact of future climate and land use change on groundwater balance and water demand in five counties along the Central Coast from 2010 to 2060. The model incorporated downscaled groundwater recharge projections based on a Warm/Wet and a Hot/Dry climate future from a spatially explicit hydrological process-based model. Two urbanization projections from a parcel-based, regional urban growth model representing 1) recent historical and 2) state-mandated housing growth projections were used as alternative spatial targets for future urban growth. Agricultural projections were based on recent historical trends from remote sensing data. Annual projected changes in groundwater balance were calculated as the difference between land-use related water demand, based on historical estimates, and climate-driven recharge plus agriculture return flows. Results indicate that future changes in climate-driven groundwater recharge, coupled with cumulative increases in agricultural water demand, result in overall declines in future groundwater balance, with a Hot/Dry future resulting in cumulative groundwater decline in all but Santa Cruz County. Cumulative declines by 2060 are especially prominent in San Luis Obispo (−2.9 to −5.1 Bm 3 ) and Monterey counties (−6.5 to −8.7 Bm 3 ), despite limited changes in agricultural water demand over the model period. These two counties show declining groundwater reserves in a Warm/Wet future as well, while San Benito and Santa Barbara County barely reach equilibrium. These results suggest future groundwater supplies may not be able to keep pace with regional demand and declining climate-driven recharge, resulting in a potential reduction in water security in the region. However, our county-scale projections showed new housing and associated water demand does not conflict with California's groundwater sustainability goals. Rather, future climate coupled with increasing agricultural groundwater demand may reduce water security in some counties, potentially limiting available groundwater supplies for new housing.

California

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California

Generating geochemical and mineralogy distributions of soil in the conterminous United States using Bayesian hierarchical spatial models

Characterizing geochemical and mineralogical soil distributions across large spatial extents is essential for understanding mineral resources, ecosystem processes, and environmental risks. Rasters of soil geochemical distributions for the conterminous United States, however, are limited. We present a Bayesian modeling workflow and tool for generating predictive geochemical and mineralogy distribution maps for the conterminous United States using integrated nested Laplace approximation (INLA) with the stochastic partial differential equation approach. By modeling soil geostatistical data with environmental covariates (soil properties, topography, climate, and land cover), we generate predictive distributions of soil geochemistry that can be mapped or extracted for further analyses. As an example, we model the spatial distribution of trace elements in soil relevant to vertebrate health (cobalt, copper, iron, manganese, selenium, and zinc) and provide a workflow that can be used to generate and visualize predictive distributions of 39 other major and trace elements and 21 minerals of the soil survey, supporting a variety of ecological, environmental, and agricultural applications.

MethodsX

Reaction kinetics and accelerant effects of sulfides in early mature hydrocarbon generation using hydrous pyrolysis

Hydrocarbon generation in organic-rich sediments is influenced by the molecular organic composition and relative abundance of associated minerals. Certain mineral-derived elements act as catalysts and reaction intermediaries, facilitating early-stage hydrocarbon formation in potential source rocks. This study investigated the role of sulfur contributed from pyrite as an accelerant in thermal reaction, focusing on its effects on early maturation and consequent hydrocarbon generation from gilsonite (low-sulfur solid petroleum). Hydrous pyrolysis (HP) experiments were conducted on mixtures of gilsonite and pyrite in varying ratios (1:0.1, 1:0.5, 1:1, 1:2, and 1:10 w/w gilsonite:pyrite) at 320, 350, and 370 °C for 72 h. Untreated and thermally altered residues were analyzed using solid bitumen reflectance (BR o , %), total organic carbon (TOC) content, programmed temperature pyrolysis, scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and X-ray diffraction (XRD) to evaluate the potential accelerant role of pyritic sulfur in hydrocarbon formation. The results show HP residues at 320 and 350 °C with greater pyrite concentrations had higher BR o , while reflectance values were similar in the 370 °C residues, regardless of pyrite concentration, suggesting enhanced reaction at lower thermal conditions. Increasing pyrite content systematically decreased hydrogen index (HI) values while increasing the transformation ratio (TR) and production index (PI), indicating enhanced conversion of organic matter to hydrocarbons with increasing pyrite concentrations. Gas yields increased with pyrite addition, particularly at 350 °C, confirming secondary cracking effects. However, gas production stabilized or declined at higher pyrite loadings (1:10), suggesting alternative reaction pathways such as coke formation. Our data indicate the presence of pyrite lowers the activation energy for thermal cracking, shifting peak experimental hydrocarbon generation temperatures downward by 20–30 °C, with the most pronounced accelerant effects observed at moderate pyrite concentrations (1:0.5 and 1:1). The thermodynamic framework reveals that pyrite stability is influenced by experimental conditions, with pyrrhotite formation favored in the presence of gilsonite due to reduced oxygen fugacity. Pyrite transformation to pyrrhotite, as observed through XRD, SEM-EDS, and predicted by thermodynamic data, further supports the accelerant role of S, as pyrrhotite exhibits a higher hydrogen transfer potential, promoting early oil generation. These findings highlight the importance of pyrite in modulating hydrocarbon generation pathways in organic-rich systems.

Journal of Analytical and Applied Pyrolysis

Irrigated agriculture influences selenium levels in an endangered marsh bird

Selenium bioaccumulation in aquatic food webs poses risks to wildlife, particularly in wetlands receiving irrigation runoff. The Salton Sea, California’s largest lake, is primarily sustained by agricultural drainage. This drainage creates wetland habitat along the lakeshore that many bird species depend on, including the federally endangered Yuma Ridgway’s rail ( Rallus obsoletus yumanensis ). However, these marshes may pose an ecological trap – attracting rails despite high selenium exposure. We captured rails during the 2020–2023 breeding seasons and compared rail selenium levels within three types of marshes (fed with irrigation runoff, Colorado River water, or groundwater). We collected blood, breast feathers, and head feathers of rails in all three water sources for selenium comparisons. We tagged adult rails with GPS transmitters to locate nests and foraging locations where we collected eggshells, unhatched eggs, and prey. We assessed selenium exposure by collecting multiple prey species commonly eaten by rails in all three water sources. Selenium concentrations varied among sampling locations. Selenium concentrations in most sample types were predominately influenced by water source and marsh inflow velocity (sometimes in combination with marsh size). Distance to inflow, however, did not influence selenium concentrations in any sample type. Selenium concentrations were highest in agricultural-fed marshes compared to river-fed and spring-fed marshes. Increased marsh inflow velocities resulted in lower selenium concentrations. Given the risk of an ecological trap, our results suggest that supplementing wetlands with Colorado River water could mitigate selenium bioaccumulation in Yuma Ridgway’s rails.

California

Polystyrene microplastics alter the accumulation and elimination dynamics of silver nanoparticles in Daphnia magna

Rationale Microplastics (MPs) can interact with engineered nanomaterials and alter their environmental fate and bioavailability. However, their influence on the bioaccumulation dynamics of silver nanoparticles (AgNPs) in aquatic filter feeders under environmentally relevant conditions remains poorly understood. We hypothesized that polystyrene microplastics (PS-MPs) alter the uptake, elimination and overall bioaccumulation dynamics of AgNPs in Daphnia magna . Methodology Adult D. magna were exposed to isotopically labeled citrate-coated 109 AgNPs in the presence and absence of PS-MPs. Waterborne uptake, dietary uptake, assimilation efficiency, food ingestion and elimination were quantified experimentally and incorporated into a biodynamic model to predict steady-state silver (Ag) concentrations under environmentally relevant exposure scenarios. Results PS-MPs increased waterborne Ag accumulation by approximately eightfold compared with AgNPs exposure alone. However, Ag elimination was substantially faster, with 98% of accumulated Ag eliminated after five days of depuration compared with 66% without PS-MPs. PS-MPs also reduced food ingestion rates (IRs), while assimilation efficiency remained largely unchanged. Biodynamic modeling predicted that steady-state Ag accumulation was approximately fivefold greater in the presence of PS-MPs, with waterborne exposure becoming the dominant accumulation pathway. Discussion These findings suggest that PS-MPs alter bioaccumulation dynamics of AgNPs in filter-feeding organisms by enhancing organism-associated Ag during waterborne exposure while accelerating Ag elimination, likely through particle-associated transport and gut egestion. Collectively, these results underscore the complexity of Ag bioaccumulation processes when MPs and AgNPs interact and highlight the importance of studies conducted under environmentally relevant conditions.

Environmental Chemistry

Widespread occurrence of former anhydrite phenocrysts in Laramide-age magmas related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, USA

Reports of magmatic anhydrite are relatively rare, with only ~30 occurrences documented worldwide so far. However, magmatic anhydrite saturation is difficult to recognize because anhydrite decomposes rapidly in near-surface environments. In most cases, only anhydrite inclusions shielded within other phenocryst phases were able to survive. Alternatively, since anhydrite phenocrysts preserved in fresh volcanic rocks are characteristically intergrown with apatite phenocrysts, the former presence of anhydrite phenocrysts can be recognized based on the occurrence of lath-shaped cavities that show a strong spatial association with apatite phenocrysts. These cavities can be either empty or filled with low-temperature, secondary minerals such as zeolites, carbonates, or microcrystalline silica. A systematic search for the occurrence of such cavities, combined with optical and Raman-spectroscopic identification of anhydrite inclusions preserved within apatite, hornblende and quartz phenocrysts, demonstrates that most of the Laramide-age magmas associated with the Santa Rita and Hanover-Fierro porphyry-skarn Cu (Zn, Mo, Au, Pb) deposits were saturated in magmatic anhydrite. The anhydrite typically coexisted with monosulfide solid solution (MSS), suggesting oxygen fugacities of ~2.0±0.5 log units above the fayalite-magnetite-quartz buffer. The magmas range from andesitic to rhyodacitic in composition, and from shortly pre-mineralization (~61 Ma) to shortly post-mineralization (~57 Ma) in age. In three samples with particularly well-recognizable former anhydrite phenocrysts, their modal abundance could be quantified based on high-resolution scans of polished hand specimens. The observed modal anhydrite abundances of 0.63–1.8 vol% translate into minimum magma sulfur contents of 0.20–0.56 wt% S. The highest sulfur content of 0.56 wt% S is difficult to reconcile with available anhydrite solubility models, but it could be reproduced in an anhydrite solubility experiment performed at 950 °C and 1.15 GPa on a natural latite containing 13.1 wt% dissolved H2O. The sample with the second-highest sulfur content of 0.26 wt% S requires ~10 wt% H2O in the silicate melt, and, consequently, a minimum pressure of ~0.5 GPa. Taken together, the results suggest that the magmas of the Central Mining District were extremely hydrous and thus originated from great depth. Indeed, their major element compositions and reconstructed H2O and S contents agree well with experimentally observed and numerically predicted compositions of residual silicate melts after 50–70 wt% crystallization of ordinary arc basalts at high pressure and high oxygen fugacities.

New Mexico