SEARCH · Geology Reports

Results for “JGR Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

310 records · Page 12Linked to original sources

USGS2026

Decadal trends in the quality of groundwater used for public drinking-water supply in California, 2004–2023, California groundwater ambient monitoring and assessment program, priority basin project

This study provides a comprehensive assessment of decadal changes in the quality of groundwater used for public drinking-water supply at 444 monitoring sites across California during 2004–2023. We assessed decadal step trends in groundwater quality for 145 water-quality constituents and geochemical indicators statewide and across geographic and land-use based network groups. We evaluated the statistical significance of directional changes (predominant increase or decrease of constituent concentrations) and the magnitude of those changes across all network groups. Uranium showed the most widespread directional and high-magnitude increases of all constituents with regulatory benchmarks statewide, particularly in the agriculture-dominated Central Valley as well as urban- and desert-dominated regions of Southern California. Fluoride and perchlorate showed the most widespread directional and high-magnitude decreases of all constituents with regulatory benchmarks statewide, which were also most pronounced in Southern California. Although arsenic and nitrate did not often register significant directional changes across network groups, they showed widespread, high-magnitude changes in both directions (increase and decrease) at levels often exceeding 10 percent of respective regulatory benchmarks statewide. Triazine herbicides (atrazine and simazine) and the gasoline oxygenate methyl tert-butyl ether (MTBE) showed significant directional decreases statewide, but not at levels considered to be of high magnitude compared to respective regulatory benchmarks. We observed significant directional and high-magnitude increases of total dissolved solids (TDS) statewide, which were most pronounced in agricultural areas. Analysis of explanatory geochemical indicators indicated that prevalent statewide increases of alkalinity and calcium were the predominant components of the observed statewide increases in TDS by mass. Widespread increases in groundwater alkalinity and calcium across agricultural and urban areas may be related, in part, to warm-season irrigation and other anthropogenic factors that have shifted soil weathering dynamics over the long term. Increasing alkalinity concentrations were related to increasing uranium concentrations, particularly in areas with aquifer materials derived from granitic rocks. Conversely, increasing calcium concentrations were related to decreasing fluoride concentrations, particularly in areas where fluoride occurred naturally at elevated concentrations. Decrease of perchlorate, triazine herbicides, and MTBE are likely related to decreased anthropogenic source inputs over time and natural attenuation in aquifers.

EarthArXiv↗

USGS2025

Advancing current understanding of Martian impact-generated hydrothermal systems through novel coupled modeling: Insights from Gale, Jezero, and other craters

Impact-generated hydrothermal systems are considered potentially habitable environments on Mars, Earth, and other planetary bodies for microbial life. However, there is an ongoing debate regarding what geological features on Mars provide definitive evidence for such systems. Although earlier studies have modeled hydrothermal processes in Martian craters, they often lacked integration with shock physics hydrocodes to constrain initial impact conditions. The importance of this two-code coupling was demonstrated by successfully replicating alteration signatures in the Earth's Haughton impact structure. In this study, we use a similar two-code approach, combining the iSALE hydrocode with the HYDROTHERM hydrothermal model to simulate the full evolution of impact-generated hydrothermal systems. We apply this method to craters the size of Jezero (∼50 km) and Gale (∼154 km) in diameter. Although Jezero's interior is largely buried, our results align with hypothesized hydrothermal vents and alteration minerals near central uplifts in similarly sized exposed craters, such as Toro and Auki. Furthermore, our models correspond to alteration patterns observed by the Curiosity in the lower layers of Mount Sharp, which may represent remnants of impact-driven hydrothermal activity. A key finding is that these systems may persist much longer than previously estimated. Our simulations suggest that a Jezero-sized system could remain habitable for thermophiles for approximately 720,000 years, whereas a Gale-sized system could persist for nearly 2 million years. Additionally, simulations under unsaturated crustal conditions reveal that air-dominated near-surface layers can suppress vertical fluid flow, enabling deep subsurface alteration without producing detectable mineral signatures at the surface.

Journal of Geophysical Research - Planets↗

USGS1995

Water quality of the Boca Raton canal system and effects of the Hillsboro Canal inflow, southeastern Florida, 1990-91

The City of Boca Raton in southeastern Palm Beach County, Florida, is an urban residential area that has sustained a constant population growth with subsequent increase in water use. The Boca Raton network of canals is controlled to provide for drainage of excess water, to maintain proper coastal ground-water levels to prevent saltwater intrusion, and to recharge the surficial aquifer system from which the city withdraws potable water. Most of the water supplied to the Boca Raton canal system and the surficial aquifer system, other than rainfall and runoff, is pumped from the Hillsboro Canal. The Biscayne aquifer, principal hydrogeologic unit of the surficial aquifer system, is highly permeable and there is a close relation between water levels in the canals and the aquifer. The amount of water supplied by seepage from the conservation areas is unknown. Because the Hillsboro Canal flows from Lake Okeechobee and Water Conservation Areas 1 and 2, which are places of more highly mineralized ground water and surface water, the canal is a possible source of contamination. Water samples were collected at 10 canal sites during wet and dry seasons and analyzed for major inorganic ions and related characteristics, nutrients, and trace elements. All concentrations were generally within or less than the drinking-water standards established by the Florida Department of Environmental Protection. The high concentrations of sodium and chloride that were detected in samples from the Boca Raton canal system are probably from the more mineralized water of the Hillsboro Canal. Other water-quality data, gathered from various sources from 1982 through 1991, did not indicate any significant changes nor trends. The data include pesticide and metal analyses of water samples and bottom sediments collected at four canal sites in the Boca Raton study area by the U.S. Geological Survey during 1982-84. The effects of the Hillsboro Canal on the water quality of the Boca Raton canal system are indicated by increased concentrations of sodium, chloride, dissolved solids, and total organic carbon. Concentrations of the constituents in the canal water generally decrease with distance from the Hillsboro Canal pumping station and are the result of dilution by receiving canal waters.

Florida↗

USGS2026

Tephra from Kīlauea’s 2008–2018 lava lake eruption—Proximal deposits and dispersal characteristics

A network of ten buckets was established early in the 2008–2018 summit eruption at Kīlauea to collect proximal tephra ejected from the new, informally named the “Overlook crater”; the buckets were emptied on most days of the eruption thereafter. This report summarizes the results of more than 2,400 different sampling intervals (most 1–3 days long) during the eruption, focusing on the physical and dispersal characteristics of the tephra deposits. The network was within about 300 meters south of the vent to capture tephra dispersed by the dominant northeast trade wind. The juvenile tephra mainly reflected spattering at the southeast (SE) sink, a downwelling area in the southeastern part of the lava lake in the Overlook crater that remained in the same area throughout the eruption, with admixtures of solid rock and secondary minerals derived from the wall of the crater. The proportion of juvenile material to lithic material ranged widely early in the eruption but was generally greater than 90 percent for the last 6 years of the eruption as lake level rose and the crater walls decreased in height and became more stable. The accumulation rate of tephra at each bucket was strongly dependent on the location of the bucket and reflects the interplay between lava lake level and wind direction and speed. The mass per unit area (m/a) of collected tephra was a maximum of about 97 kilograms per square meter for the entire eruption, equivalent to a thickness of about 75 millimeters. Thirty-two explosive events with a volcanic explosivity index of −2 to −4 deposited much of the tephra in the network. Fifteen of these rock-fall-induced events occurred within 6 days of one another. Pele’s hair, a volcanic glass predominantly associated with quieter activity at the vent in the final half of the eruption, was dispersed more than 60 kilometers downwind from the lava lake and formed a nearly continuous deposit near the Overlook crater. This eruption was probably the most frequently sampled long-lasting eruption in history, but most of the deposits are ephemeral. The collected samples, although generally of small mass, are retained by the Hawaiian Volcano Observatory and are available for detailed study.

Hawaii↗

USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗

USGS2026

Mid-Cretaceous porphyritic magmatism in the Beartooth Mountains of the northern Laramide foreland and its connection to Frontier Formation sediment dispersal in Bighorn basin, Montana-Wyoming (USA), and Cordilleran tectonism

Porphyritic intrusions in the southeast Beartooth Mountains and porphyritic cobbles from the Torchlight conglomerate of the Cenomanian Frontier Formation in Bighorn basin (Montana-Wyoming, USA) bear striking resemblance. We utilize geologic mapping, petrography, geochemistry, and geochronology to characterize rocks from both locations and test whether the Beartooth Mountains area was the provenance for Bighorn basin cobbles. Mapping on Line Creek Plateau in the Beartooth Mountains shows three units with porphyritic phenocrysts consisting dominantly of plagioclase, plagioclase + potassium feldspar, and plagioclase + quartz. Petrography shows embayed quartz, opacitic rims, and zoned plagioclase. Geochemistry characterizes the intrusions as trachydacite to trachyte and trace elements exhibit enrichment in light rare earth elements and slight depletion in heavy rare earth elements relative to primitive mantle. Zircon U-Pb dating shows substantial Archean inheritance and ca. 104−92 Ma dates; some samples display multiple mid-Cretaceous date populations. Bighorn basin porphyritic cobbles exhibit similar modal mineralogy, near-identical geochemistry, and Archean inheritance and mid-Cretaceous geochronology. We suggest the porphyritic cobbles were sourced from basement-hosted porphyritic intrusions now exposed in the Beartooth Mountains, given that geochemistry does not agree with coeval volcanic sources along the Frontier Formation depositional fairway (Idaho batholith) or sedimentary-hosted Beartooth Mountains porphyritic sills intruded into Cambrian shale. Stratigraphic evidence does not support kilometer-scale mid-Cretaceous Beartooth Mountains exhumation to expose basement-hosted porphyritic intrusions, and we therefore present a volcanic hypothesis to bring rocks to the surface. This mid-Cretaceous multimillion-year magmatism is unexplained by tectonic models for the north-central Laramide foreland, and thus we further explore the emplacement processes, spatiotemporal significance, and tectonic implications of these rocks.

Montana, Wyoming↗

USGS2025

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California↗

USGS2026

The mineral chemistry networks of tin and tungsten reflect metallogenic eras of the Mesozoic

Continental remobilization is a crucial driver of metallogenesis and the formation of ore deposits. Some of the world’s largest mineral deposits of the economically valuable elements tin (Sn), tungsten (W), gold (Au), copper (Cu), lead (Pb), and zinc (Zn) formed during the Mesozoic Era. Additionally, the chemistry and distribution of the elements Sn and W have been investigated in previous studies to understand planetary formation and differentiation processes. These two elements are largely co-located during certain South China Mesozoic metallogenic events but are not co-located during other time periods in the same regions. Here, we investigated the mineral chemistry network similarities and dissimilarities of Sn and W to understand their mineral formation and distribution during the Mesozoic Era and throughout Earth history. Mineral chemistry network community detection analysis and electronegativity associations among mineral constituent elements of Sn minerals and W minerals indicate that the elements have similar chemistry among their oxide minerals. However, Sn forms a much wider range of minerals that also contain S compared to W, which occurs in a limited number of S-containing minerals. The divergent constituent element interactions among S-containing Sn minerals and W minerals reflect the redox sensitivity and importance of oxygen (O) fugacity in Sn mineral formation. Conversely, extensive W mineral deposits are known to form at both high and low O fugacities. The similarities and differences between the mineral chemistry networks of Sn and W reflect the mineral distribution of the two elements in the Sn-W mineralization event from 160 to 139 Ma vs. the Sn–uranium (U) mineralization event from 125 to 98 million years ago (Ma). The mineral chemistry and distribution of Mesozoic Sn and W deposits illustrate the contrasting importance of redox and O fugacity on the mineral formation of different elements, and the dynamic crustal evolution that took place during this period of Earth history.

Geosciences↗

USGS2025

USGS—An Unparalleled Scientific Asset

The U.S. Geological Survey (USGS) delivers information critical to powering our economy, managing our natural resources, and keeping Americans safe and healthy. 1 Mapping the Nation $21B Geologic maps save users an estimated 15% in annual costs: a value of between $14B and $21B. $25.6B in annual value to users of imagery from Landsat satellites, which were codeveloped by NASA and the USGS and operated through their lifespans by the USGS. $13.5B in annual benefits is generated by the USGS's 3D Elevation Program. Securing America’s Energy Independence 44% USGS-identified undiscovered geothermal energy is equal to 44% of current U.S. electricity generation. 29.4B barrels of oil and 391.6 trillion cubic feet of gas in recoverable resources are available on U.S. public lands based on USGS assessments. Protecting Americans’ Health and Safety $424B in recent wildland fire damages highlight the need for USGS fire science, which supports efforts to protect communities and reduce risk. USGS earthquake, volcano, landslide, and coastal hazard monitoring and information save lives and minimize costs; for example, $2.8M can be saved because of USGS enhanced information about a Mauna Loa eruption. $4.5B is the estimated cost of annual flooding. Through a network of over 11,885 streamgages, the USGS supports public safety and enables forecasts, early warning systems, and management actions that protect lives and property. Supporting National Security $3.1B The USGS identified a $3.1B risk to the American economy if China restricts gallium imports. This is one example underscoring the importance of the USGS mapping critical minerals, investigating supply chains, and producing the Nation’s critical minerals list. Enhancing Our Lands and Waters $21B in estimated annual costs results from invasive species. The USGS’s invasive species research informs approaches used to reduce their effects on agriculture, water infrastructure, disease transmission, fisheries, and outdoor recreation. USGS innovations support early warnings for harmful algal blooms—over $2M in yearly benefits are provided to Kansas alone. $45B USGS science informs the management of big game (such as deer and elk). The big-game hunting industry contributes $45B to the U.S. economy. Fostering American Prosperity $4.1T Mineral commodities are necessary for the $4.1T in value added to the GDP by major industries that consume processed mineral materials and employ 1 million workers. Because of this, USGS data on mineral supply, demand, and trade are highly valued. 45,000 metric tons Rare earths power the growing technology economy, including cell phones, electric vehicles, and medical devices. For over 70 years, USGS work has supported the discovery of rare earth resources in California’s Mountain Pass area, which produced 45,000 metric tons of rare earth concentrates in 2024—over 11% of the global supply. Guarding American Food Security $70.2B USGS science informs early warning systems and management strategies to mitigate disease outbreaks in agriculture—critical research on highly pathogenic avian influenza, for example, helps safeguard the $70B value in poultry and egg production. $11.8B USGS groundwater tools are vital for agriculture; for example, in the Mississippi Alluvial Plain, 65% of farming relies on groundwater to support its $11.8B annual industry. 1 Values throughout are given in billions (B), millions (M), and trillions (T) of U.S. dollars. GDP is “Gross Domestic Product.” Percentages are shown as %.

General Information Product↗

USGS2000

Ground-water quality atlas of Oakland County, Michigan

The U.S. Geological Survey (USGS), in cooperation with Oakland County Health Division (OCHD), collected 140 water samples from 38 wells in Oakland County during 1998 to better understand ground-water quality. OCHD had observed temporal variations in concentrations of various constituents, so two additional sets of samples were collected to evaluate potential short-term variability related to sample collection procedures and long-term seasonal variability. Replicate samples from 28 wells were analyzed in the Michigan Department of Environmental Quality (MDEQ) Drinking Water Laboratory to compare MDEQ’s analytical results to those obtained from the USGS National Water Quality Laboratory. Several additional databases describing population, land use, water supply, soils, geology, and flows of ground water and surface water are presented in the first part of the report to assist in interpreting the water-quality data. Maps created from these databases are provided in the first portion of the report as an extension of the study-area description. The U.S. Environmental Protection Agency (USEPA) has established Maximum Contaminant Levels (MCL) and Secondary Maximum Contaminant Levels (SMCL) for which samples were analyzed in this study. Water from the 38 wells sampled by the USGS did not exceed the SMCL or MCL for sulfate, fluoride, or nitrite. However, water from 26 wells exceeded the SMCL for iron, water from 12 wells exceeded the SMCL for manganese, and water from 12 wells exceeded the SMCL for dissolved solids. Water from two wells exceeded the MCL for nitrate, although nitrate concentrations in water from most wells was below the detection limit. Water from seven wells exceeded the SMCL for chloride, and water from all wells contained detectable concentrations of chloride. Water from five wells exceeded the MCL for arsenic, and most of the wells sampled contained detectable concentrations of arsenic. These five wells were identified from previous MDEQ analyses to have elevated arsenic concentrations, and were sampled to obtain additional chemistry information. Replicate samples were collected from 26 of the 38 wells for analysis at the MDEQ Drinking-Water Laboratory to compare the results with the USGS National Water Quality Laboratory. The results of the replicate analyses indicate close agreement between the laboratories, with mean differences for nitrate, chloride, and arsenic of 0.10 milligrams per liter (mg/L) as nitrogen, 6.8 mg/L, and 0.0008 mg/L, respectively between the USGS and MDEQ analyses. Potential health effects associated with ingesting nitrate, chloride, and arsenic are provided with the water-quality data, along with references for further information.

Michigan↗

USGS2025

Widespread occurrence of former anhydrite phenocrysts in Laramide-age magmas related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, USA

Reports of magmatic anhydrite are relatively rare, with only ~30 occurrences documented worldwide so far. However, magmatic anhydrite saturation is difficult to recognize because anhydrite decomposes rapidly in near-surface environments. In most cases, only anhydrite inclusions shielded within other phenocryst phases were able to survive. Alternatively, since anhydrite phenocrysts preserved in fresh volcanic rocks are characteristically intergrown with apatite phenocrysts, the former presence of anhydrite phenocrysts can be recognized based on the occurrence of lath-shaped cavities that show a strong spatial association with apatite phenocrysts. These cavities can be either empty or filled with low-temperature, secondary minerals such as zeolites, carbonates, or microcrystalline silica. A systematic search for the occurrence of such cavities, combined with optical and Raman-spectroscopic identification of anhydrite inclusions preserved within apatite, hornblende and quartz phenocrysts, demonstrates that most of the Laramide-age magmas associated with the Santa Rita and Hanover-Fierro porphyry-skarn Cu (Zn, Mo, Au, Pb) deposits were saturated in magmatic anhydrite. The anhydrite typically coexisted with monosulfide solid solution (MSS), suggesting oxygen fugacities of ~2.0±0.5 log units above the fayalite-magnetite-quartz buffer. The magmas range from andesitic to rhyodacitic in composition, and from shortly pre-mineralization (~61 Ma) to shortly post-mineralization (~57 Ma) in age. In three samples with particularly well-recognizable former anhydrite phenocrysts, their modal abundance could be quantified based on high-resolution scans of polished hand specimens. The observed modal anhydrite abundances of 0.63–1.8 vol% translate into minimum magma sulfur contents of 0.20–0.56 wt% S. The highest sulfur content of 0.56 wt% S is difficult to reconcile with available anhydrite solubility models, but it could be reproduced in an anhydrite solubility experiment performed at 950 °C and 1.15 GPa on a natural latite containing 13.1 wt% dissolved H2O. The sample with the second-highest sulfur content of 0.26 wt% S requires ~10 wt% H2O in the silicate melt, and, consequently, a minimum pressure of ~0.5 GPa. Taken together, the results suggest that the magmas of the Central Mining District were extremely hydrous and thus originated from great depth. Indeed, their major element compositions and reconstructed H2O and S contents agree well with experimentally observed and numerically predicted compositions of residual silicate melts after 50–70 wt% crystallization of ordinary arc basalts at high pressure and high oxygen fugacities.

New Mexico↗

USGS2025

Climate change and future water availability in the United States

The steady rise in global temperature as a result of human activity is causing changes in Earth’s water cycle. The balance of water stored within and moving between vapor, liquid, and frozen states in the water cycle is shifting, with consequences for water availability that include increases in drought, fire weather, flooding, and heavy precipitation, as well as cryosphere decline and sea-level rise. In this chapter of the U.S. Geological Survey Integrated Water Availability Assessment—2010–20, we provide an overview of climate-change observations and projections from Earth-system model simulations that relate to future water availability, from global and national climate assessments and from the published literature. Effects of climate change on primary water-cycle components are discussed in context of how global-scale hydroclimate drivers influence regional processes within the United States. Understanding the major climate drivers impacting the water cycle is crucial to predicting future changes in water availability and developing adaptation strategies to ensure human and ecosystem water supplies. First, we provide background information on the water cycle, the climate-model ensemble simulations developed to produce projections based on warming scenarios, and attribution and certainty levels. Tipping points, self-reinforcing feedbacks, cascading effects, and compound extremes are introduced. The framework of climatic impact drivers (CIDs) outlined in the Intergovernmental Panel on Climate Change Sixth Assessment Report (IPCC AR6) is used to show primary drivers of physical change to the water cycle and to understand and predict changes in future water availability. Specific climate-change related observations and projections are discussed for water cycle components of precipitation, evapotranspiration, soil moisture, streamflow, lakes and wetlands, ice and snow, and groundwater, as well as their implications for future water availability for humans and ecosystems. The chapter concludes with a synthesis discussion of three examples of complex regional-scale hydroclimate processes that influence water availability for populations in the United States, including (1) mountain and coastal precipitation, (2) aridification and drought, and (3) the influence of forest-cover change on terrestrial water-vapor recycling.

Professional Paper↗

USGS2025

Enhanced geothermal systems electric-resource assessment for the Great Basin, southwestern United States

The U.S. Geological Survey recently (2025) completed a provisional assessment of the geothermal-electric resources associated with high-temperature, low-permeability rock formations of the Great Basin, Southwestern United States. If sufficient technological advances to commercialize enhanced geothermal systems occur, then a current best provisional estimate for electric-power generation capacity of 135 gigawatts electric are available from the upper 6 kilometers of the Earth’s crust. This estimate is a potential substantial increase of the installed geothermal electricity-generating capacity from <1 to 10 percent of current total U.S. power production capacity.

California, Idaho, Nevada, Oregon, Utah↗

USGS2000

Water quality of selected springs and public-supply wells, Pine Ridge Indian Reservation, South Dakota, 1992-97

This report presents results of a water-quality study for the Pine Ridge Indian Reservation, South Dakota. The study was a cooperative effort between the U.S. Geological Survey and the Water Resources Department of the Oglala Sioux Tribe. Discharge and water-quality data were collected during 1992-97 for 14 contact springs located in the northwestern part of the Reservation. Data were collected to evaluate potential alternative sources of water supply for the village of Red Shirt, which currently obtains water of marginal quality from a well completed in the Inyan Kara aquifer. During 1995-97, water-quality data also were collected for 44 public-supply wells that serve about one-half of the Reservation's population. Quality-assurance sampling was used to evaluate the precision and accuracy of environmental samples. Ten of the springs sampled contact the White River Group, and four contact the Pierre Shale. Springs contacting the White River Group range from calcium bicarbonate to sodium bicarbonate water types. Two springs contacting the Pierre Shale have water types similar to this; however, sulfate is the dominant anion for the other two springs. In general, springs contacting the White River Group are shown to have better potential as alternative sources of water supply for the village of Red Shirt than springs contacting the Pierre Shale. Nine of the springs with better water quality were sampled repeatedly; however, only minor variability in water quality was identified. Six of these nine springs, of which five contact the White River Group, probably have the best potential for use as water supplies. Discharge from any of these six springs probably would provide adequate water supply for Red Shirt during most periods, based on a limited number of discharge measurements collected. Concentrations of lead exceeded the U.S. Environmental Protection Agency (USEPA) action level of 15 µg/L for three of these six springs. Five of these six springs also had arsenic concentrations that exceeded 10 µg/L, which could be problematic if the current maximum contaminant level (MCL) is lowered. Blending of water from one or more springs with water from the existing Inyan Kara well may be an option to address concerns regarding both quantity and quality of existing and potential sources. All nine springs that were sampled for indicator bacteria had positive detections on one or more occasions during presumptive tests. Although USEPA standards for bacteria apply only to public-water supplies, local residents using spring water for domestic purposes need to be aware of the potential health risks associated with consuming untreated water. One spring contacting the White River Group and two springs contacting the Pierre Shale exceeded 15 pCi/L for gross alpha; these values do not necessarily constitute exceedances of the MCL, which excludes radioactivity contributed by uranium and radon. Additional sampling using different analysis techniques would be needed to conclusively determine if any samples exceeded this MCL. Nine springs were sampled for selected pesticides and tritium. The pesticides atrazine, carbaryl, and 2,4-D were not detected in any of the samples. The nine springs were analyzed for tritium in order to generally assess the age of the water and to determine if concentrations exceeded the MCL established for gross beta-particle activity. Tritium results indicated two springs are composed primarily of water recharged prior to atmospheric testing of nuclear bombs and two other springs have a relatively large percentage of test-era water. The remaining five springs had tritium values that indicated some percentage of test-era water; however, additional sampling would be needed to determine whether water is predominantly pre- or post-bomb age. Of the 44 public-supply wells sampled, 42 are completed in the Arikaree aquifer, one is completed in an alluvial aquifer, and one is completed in the Inyan Kara aquifer. Water from the alluvial well is a sodium bicarbonate water type, water from Arikaree aquifer ranges from calcium bicarbonate to sodium bicarbonate types, and water from the Inyan Kara well is a calcium sulfate bicarbonate type. Of the 44 wells sampled, 28 (64 percent) tested positive for indicator bacteria in presumptive tests. Because these were single samples that generally were collected upstream from chemical treatment feeders, positive detections do not necessarily constitute exceedances of drinking-water standards. A single sample from an Arikaree well exceeded the MCL for arsenic of 50 µg/L. Arsenic exceeded 10 µg/L for six additional Arikaree wells and for the alluvial well and the Inyan Kara well, which could be problematic if the current MCL is lowered. The alluvial well also exceeded the secondary maximum contaminant level (SMCL) for dissolved solids, which is non-enforceable, and the action level for lead. The Inyan Kara well exceeded the SMCL's for iron and for manganese and the MCL of 5 pCi/L for radium-226 and 228 combined. Several Arikaree wells exceeded SMCL's for either pH, sulfate, dissolved solids, iron, or manganese. One Arikaree well exceeded the MCL of 4.0 mg/L for fluoride and another exceeded the MCL of 10 mg/L for nitrite plus nitrate. Ten Arikaree wells equalled or exceeded 15 pCi/L for gross alpha; however, these values do not necessarily constitute exceedances of the MCL, which excludes radioactivity contributed by uranium and radon. Additional sampling using different analysis techniques would be needed to conclusively determine if any samples exceeded this MCL. Eight wells, all from the Arikaree aquifer, equalled or exceeded the proposed MCL of 20 µg/L for uranium and 33 wells (75 percent) equalled or exceeded one-half of the proposed MCL. Although this standard has only been proposed, additional information regarding the extent of elevated uranium concentrations in the Arikaree aquifer, and the geochemical processes involved, may be beneficial. It was determined from analyses of uranium isotope data for five wells that the source of elevated uranium concentrations is naturally occurring, rather than anthropogenic.

South Dakota↗

USGS2024

Status and understanding of groundwater quality in the Mojave Basin Domestic-Supply Aquifer study unit, 2018—California GAMA Priority Basin Project

Groundwater quality in the western part of the Mojave Desert in San Bernardino County, California, was investigated in 2018 as part of the California State Water Resources Control Board Groundwater Ambient Monitoring and Assessment Program Priority Basin Project. The Mojave Basin Domestic-Supply Aquifer study unit (MOBS) region was divided into two study areas—floodplain and regional—to assess differences between the two major aquifers used for drinking water supply in the area. This assessment characterized the quality of ambient groundwater and not the quality of treated drinking water. The study included three components: (1) a status assessment, which characterized the quality of groundwater resources used for domestic drinking-water supply in the floodplain and regional study areas; (2) a brief understanding assessment, which evaluated factors that could potentially affect the quality of groundwater used by domestic wells in the region; and (3) a comparative assessment between the groundwater resources used by domestic wells and public-supply wells in the two study areas. The domestic-well assessment was based on data collected by the U.S. Geological Survey from 48 domestic wells in January–May 2018. The public-supply assessment was based on data for samples from 322 public-supply wells in 2008–18, either collected by the U.S. Geological Survey or compiled from the California State Water Resources Control Boards Division of Drinking Water publicly available database. Concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. Relative concentrations, defined as the measured concentration divided by the benchmark concentration, were classified as high (greater than 1.0), moderate (greater than 0.5 for inorganic constituents or 0.1 for organic and special-interest constituents, and not high), or low (concentrations lower than moderate). The floodplain and regional study areas were divided into 15 and 35 grid cells, respectively, and grid-based methods were used to compute the areal proportions of the two study areas with high, moderate, or low relative concentrations of individual constituents and classes of constituents. For the domestic-supply assessment, one or more inorganic constituents with health-based benchmarks were detected at high relative concentrations in 58 percent of the regional study area and 13 percent of the floodplain study area. The inorganic constituents with health-based benchmarks detected at high relative concentrations in the regional study area were arsenic, chromium and hexavalent chromium, fluoride, adjusted gross alpha particle activity, uranium, molybdenum, strontium, and nitrate; only arsenic was detected at high relative concentrations in the floodplain study area. One or more inorganic constituents with secondary maximum contaminant level benchmarks were detected at high concentrations in 15 and 6.7 percent of the regional and floodplain study areas, respectively. The constituents detected at high relative concentrations in the regional study area were total dissolved solids, chloride, sulfate, and iron; only total dissolved solids and sulfate were detected at high relative concentrations in the floodplain study area. Organic constituents were not detected at moderate or high relative concentrations in either the regional or floodplain study areas. Volatile organic compounds were detected at low relative concentrations in 21 and 27 percent of the regional and floodplain study areas, respectively, and pesticides were detected at low relative concentrations in 9.1 and 20 percent of the regional and floodplain study areas, respectively. The only individual organic constituent detected in more than 10 percent of either study area was the trihalomethane trichloromethane. Total coliform bacteria were detected in 15 and 27 percent of the grid wells in the regional and floodplain study areas, respectively. The greater prevalence of high relative concentrations of many inorganic constituents in the regional study area compared to the floodplain area likely indicates the greater diversity of geologic material at depth in aquifer material and generally finer-grained alluvium compared to the floodplain study area combined with generally older groundwater that has had more contact time with aquifer materials. In general, trace element concentrations (1) increased with increasing groundwater age, (2) increased with distance from recharge sources in the mountains, and (3) increased with closer proximity to some types of geological units. In general, groundwater from domestic wells in the floodplain study area is young, with most samples containing a component of modern groundwater based on tritium and unadjusted carbon-14 activities, whereas groundwater from domestic wells in the regional study area generally is old, with most samples having unadjusted carbon-14 ages of 5,000–40,000 years. Public-supply wells in MOBS generally were deeper than domestic wells and presumably are in contact with older, more weathered alluvium that may have more mobile trace elements, such as arsenic or uranium. However, only 26 percent of the public-supply regional study area had high relative concentrations of inorganic constituents, compared to 58 percent for the domestic regional study area. The percentages of the public-supply and domestic floodplain study areas with high relative concentrations of inorganic constituents were 11 and 13 percent, respectively. The ages of groundwater used by public-supply and domestic wells in each study area were similar, which was not expected given the greater depth of the public-supply wells. Three potential factors may contribute to these results: (1) greater spatial footprint of domestic well network, which may result in domestic wells pumping groundwater from fractured bedrock or mineralized areas not used by public-supply wells; (2) greater pumping rates in public-supply wells, resulting in more water being withdrawn from coarse-grained, heterogeneous alluvium than finer-grained layers, which may have higher concentrations of (or more mobile) inorganic constituents; and (3) a greater degree of well management with public-supply wells, which may include pausing use of or decommissioning wells if treating or blending water is not feasible to lower constituent concentrations.

California↗

USGS2025

Near-surface geophysics: Environmental applications

The field of geophysics encompasses a broad and diverse compilation of methodologies that employs principles of physics to characterize properties of earth materials within the subsurface. While geophysical methods have a long history in resource exploration and studies of Earth’s interior, the subdiscipline of “near-surface geophysics” has evolved in recent decades for examination of the shallow, near-surface environment for a range of purposes ranging from archaeological or forensic investigations to assessment of geologic, hydrologic, biologic, and geochemical properties and processes. “Environmental geophysics” are near-surface geophysical studies and methods that focus on understanding natural systems (e.g., watershed hydrology, groundwater–surface water connections, biophysical processes) as well as research pertaining to anthropogenic impacts and land management, (e.g., contamination and remediation, saltwater intrusion, agricultural practices). This field can be further subdivided into subdisciplines focused on specific topics and applications, such as water resources and hydrology (hydrogeophysics) or biologic and microbial processes (biogeophysics). Studies in environmental geophysics span a range of scales, from pore-scale laboratory tests to watershed-scale or regional field experiments. Methods vary by the nature of physics employed, the specific measurement acquired, and how that data is ultimately processed and analyzed to produce interpretable results. There exists further diversity in the acquisition logistics, geometry, and timing of data collection. Geophysical data can be collected in boreholes (one-dimensional, 1-D, vertical profiles), along survey lines (two-dimensional, 2-D, cross-sections), or in dense sensor arrays or gridded profiles (three-dimensional, 3-D, models). Regarding the temporal aspect, studies can conduct one-time geophysical surveys to obtain detailed imaging of subsurface structure or use timelapse and continuous monitoring to investigate variations in subsurface properties over time. The cumulation of all possible permutations of these factors (method, acquisition geometry, survey design, and target application) results in an immense diversity among environmental geophysical studies. Nevertheless, this field remains unified in the pursuit of understanding natural and human-impacted near-surface environments through geophysical investigations. Here we highlight some key references within environmental geophysics. Resources on geophysical theory, acquisition logistics, processing and inversion workflows, and example case studies are categorized into the most common geophysical classes within Geophysical Methods. Lastly, example references for the dominant types of applications in environmental geophysical studies are catalogued in Environmental Applications.

Book chapter↗

USGS2025

Carbonatite-hosted residual REE deposits

Rare earth elements (REEs) occur in magmatic rocks but are especially enriched in carbonatite and alkaline silicates. If these rocks are chemically weathered, then the REEs may become further enriched within the regolith developed from these rocks. Primary magmatic REE minerals, as well as the various carbonate minerals and apatite, provide the REEs which, under pervasive chemical weathering, are incorporated within low-temperature REE minerals forming within the regolith. Many of these minerals, as well as their textures, are characteristic of this mode of formation. Lateritic conditions of weathering are instrumental in producing a thick, weathered, or regolith, profile, and the roles of sulfide oxidation, fluctuating groundwater tables, and downward mass wasting due to carbonate dissolution are identified as the most important controls on REE enrichment in the regolith.

Book chapter↗

USGS2026

USGS Geochron Database

Introduction Geochronology helps us understand Earth’s history by determining when important events, like volcanic eruptions, the rise of mountains, the formation of mineral resources, and changes in the landscape, happened. Geochronological data directly support geologic mapping and can inform decisions about geologic hazard mitigation, natural resource management, and infrastructure resilience. The U.S. Geological Survey (USGS) Geochron database provides access to more than 300,000 published, publicly available age measurements from more than 40,000 geological samples. This database is the result of a collaborative effort with State geological surveys and geoscientists from across the globe. The USGS Geochron database is the most comprehensive collection of geochronological data available for the United States. Users can view data through an interactive map explorer, download datasets, and integrate data into geospatial software or other analysis tools.

Fact Sheet↗