Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “International Journal of Wildland Fire”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 12Linked to original sources
USGS2026

Overstorey mortality promotes juvenile piñon pine growth during favourable weather at cooler, wetter sites

Hotter droughts have resulted in widespread tree die-off events globally, frequently leading to regeneration failure. Dry forest recovery often depends on the growth and survival of extant juvenile trees. However, it is unclear how microenvironmental changes following overstorey tree die-off affect juvenile trees, particularly in dryland systems where tree recruitment is typically limited by water availability and heat stress. We simulated an overstorey tree die-off event by girdling trees in piñon-juniper woodlands across the south-western United States. We sampled juvenile piñon pine growth from live and dead overstorey treatments across six study sites spanning a regional latitudinal gradient and local elevational gradients. We examined how juvenile branch and needle growth differed between live and dead overstorey treatments, and whether responses varied with weather conditions and juvenile tree size following overstorey mortality. We found greater juvenile branch and needle growth under dead compared with live overstorey trees for 2 years following overstorey mortality at mid- and high-elevation sites which are typically cooler and wetter than the other sites. These observed growth releases were contingent on favourable post-mortality weather conditions. Higher growth under dead overstorey occurred at sites experiencing near-average climatic water deficits compared with sites experiencing above-average climatic water deficits. Growth at all sites increased from the first to second year after overstorey mortality. Across sites, growth was unrelated to juvenile tree size. Synthesis . Our results underscore differentiation in juvenile responses to overstorey tree die-off driven by local site conditions and weather across the range of Pinus edulis . Overstorey mortality resulted in consistently higher juvenile growth only at climatically favourable sites and during favourable weather, while unmeasured microsite differences could help account for variation observed at the hottest and driest site. Results from less climatically favourable sites suggest that overstorey trees neither directly limit nor facilitate juvenile growth, though further study over longer timeframes is needed to resolve the pace and magnitude of potential recovery or decline. Overall, juvenile vigour may be promoted following overstorey mortality only in a narrow spatial (site) and temporal (weather) environmental context, suggesting additional vulnerabilities for piñon populations under more arid conditions.

Arizona, Colorado↗
USGS2024

Bioconcentration of per- and polyfluoroalkyl substances and precursors in fathead minnow tissues environmentally exposed to aqueous film-forming foam-contaminated waters

Exposure to per- and polyfluoroalkyl substances (PFAS) has been associated with toxicity in wildlife and negative health effects in humans. Decades of fire training activity at Joint Base Cape Cod (MA, USA) incorporated the use of aqueous film-forming foam (AFFF), which resulted in long-term PFAS contamination of sediments, groundwater, and hydrologically connected surface waters. To explore the bioconcentration potential of PFAS in complex environmental mixtures, a mobile laboratory was established to evaluate the bioconcentration of PFAS from AFFF-impacted groundwater by flow-through design. Fathead minnows ( n = 24) were exposed to PFAS in groundwater over a 21-day period and tissue-specific PFAS burdens in liver, kidney, and gonad were derived at three different time points. The ∑PFAS concentrations in groundwater increased from approximately 10,000 ng/L at day 1 to 36,000 ng/L at day 21. The relative abundance of PFAS in liver, kidney, and gonad shifted temporally from majority perfluoroalkyl sulfonamides (FASAs) to perfluoroalkyl sulfonates (PFSAs). By day 21, mean ∑PFAS concentrations in tissues displayed a predominance in the order of liver > kidney > gonad. Generally, bioconcentration factors (BCFs) for FASAs, perfluoroalkyl carboxylates (PFCAs), and fluorotelomer sulfonates (FTS) increased with degree of fluorinated carbon chain length, but this was not evident for PFSAs. Perfluorooctane sulfonamide (FOSA) displayed the highest mean BCF (8700 L/kg) in day 21 kidney. Suspect screening results revealed the presence of several perfluoroalkyl sulfinate and FASA compounds present in groundwater and in liver for which pseudo-bioconcentration factors are also reported. The bioconcentration observed for precursor compounds and PFSA derivatives detected suggests alternative pathways for terminal PFAS exposure in aquatic wildlife and humans.

Environmental Toxicology and Chemistry↗
USGS2025

Rare earth element-mineralized carbonatite in the Bear Lodge Alkaline Complex, USA—Ore genesis implications from fluid inclusion characterization

Rare earth element (REE) resources of the Bear Lodge Alkaline Complex, Wyoming, are hosted in variably leached carbonatite spatially related to diatreme breccia pipes. We investigated the genesis of REE and lesser-known gold resources through fluid inclusion analysis of carbonatite, fluorite breccia, and smoky quartz vein samples. Physicochemical characteristics of inclusion-trapped fluids were evaluated using petrography, microthermometry, Raman spectroscopy, decrepitate mound analysis, energy-dispersive spectroscopy, laser ablation inductively coupled plasma mass spectrometry, and noble gas isotope analysis. Microthermometry results reveal three fluid types that affected carbonatite dikes within deeper zones that escaped near-surface, ore-grade REE enrichment: (1) high-temperature (330–432°C) magmatic fluid captured in fine-grained calcite; (2) REE-enriched alkali bicarbonate-sulfate brine; and (3) low-temperature (117–182°C) diluted magmatic or meteoric water. Multiphase brine-like inclusions contain burbankite, nahcolite, strontianite, celestine and alkali sulfate daughter crystals, linking them to early burbankite mineralization. Peripheral smoky quartz and fluorite occurrences at Smith Ridge, 1.5 km from the central carbonatite dike swarm, contain primary inclusions that are Cl-poor and rich in Na-HCO 3 -SO 4 , similar to secondary and pseudosecondary inclusions in carbonatites. Helium isotopes reveal a MORB-like source for carbonatite samples and an older crust signature at Smith Ridge, consistent with the proximal ridge-top exposures of Archean granite. Results from this fluid inclusion study coupled with previous studies of carbonatite mineral paragenesis, show that light REEs (LREEs) were not mobilized great distances. Instead, burbankite crystallized within carbonatite from alkali bicarbonate fluids. With sodium retained in early burbankite, outward-emanating fluids enriched in potassium relative to sodium (higher K:Na) resulted in potassium–ferric iron metasomatism of silicate host rocks. This alkali fractionation was accompanied by fractionation of LREEs and heavy REEs (HREEs), with LREEs dominating the central carbonatite resources. In contrast, areas of peripheral REE mineralization at Bear Lodge are commonly characterized by higher HREE:LREE ratios. The K:Na ratio of associated fenites or alteration assemblages could be indicative of early crystallized burbankite in carbonatites and REE fractionation processes potentially leading to areas of concentrated HREEs with greater supply vulnerabilities.

South Dakota, Wyoming↗
USGS2026

Linking distribution and return-on-investment models to optimize woody management for prairie grouse in Nebraska

Grasslands in Nebraska, USA, face threats from agricultural conversion, urban development, and woody encroachment, all of which negatively affect prairie grouse ( Tympanuchus spp.) populations. To optimize conservation planning, Nebraska wildlife agencies developed probabilistic area-based surveys for greater prairie-chicken ( T. cupido ) and sharp-tailed grouse ( T. phasianellus ) to sample landscapes across a range of environmental conditions. This design improves historical surveys and enables the development of distribution models that quantitatively define habitat associations and support scenario-based conservation planning. Using survey data collected during 2020–2022, we modeled prairie grouse occurrence and abundance as functions of land cover, topography, and climate using Bayesian logistic and zero-inflated negative binomial models with regularized horseshoe priors. We then conducted a maximum potential return-on-investment analysis of woody cover treatments, assuming sustained treatment success, relative to projected impacts of woody encroachment on prairie grouse populations by 2050. Among modeled associations were a positive association with grasslands having low woody cover and a negative association with grasslands having high woody cover. Across the 3-year period, median estimated annual populations were 142,380 for greater prairie-chicken (range of 95% CIs across years = 68,821–277,615) and 64,154 for sharp-tailed grouse (range of 95% CIs across years = 27,550–146,559). Under projected woody encroachment, mean predicted population declines were 10% for greater prairie-chicken (range of 95% CIs = 7–14%) and 6% for sharp-tailed grouse (range of 95% CIs = 5–7%). Areas with high prairie grouse density and low treatment costs in 2021, and high projected woody encroachment and population loss by 2050, offered the greatest return on investment for woody management. Return on investment was greatest in the northwestern Shortgrass Prairie ecoregion (northwestern Nebraska) for sharp-tailed grouse and the eastern Sandhills ecoregion (central Nebraska) for both species. These models underscore the value of evidence-based, quantitative approaches for prioritizing conservation actions on working lands. Scenario-based modeling could be extended to guide other treatments, such as optimizing restoration (e.g., Conservation Reserve Program) or incentivizing grassland persistence in areas with predicted climate resilience.

Nebraska↗
USGS2024

The addition of 144Nd atomic mass to routine ICP-MS analysis as a Quick Screening Tool for Approximating Rare Earth Elements (Q-STAR) in natural waters

Rare earth elements (REEs) are a class of critical minerals, all of which can have supply chain vulnerability that impacts economic security. These elements are widely measured in environmental matrices via inductively coupled plasma mass spectrometry (ICP-MS); however, successful quantification can require time-consuming, sample-specific optimization. While a sample-by-sample approach is appropriate for targeted quantification studies, this approach is not suitable for mineral exploration efforts where rapidly screening thousands of samples for the presence of REEs is desired. Here, we demonstrated the use of a Quick Screening Tool for Approximating REEs (Q-STAR) to detect REEs in surface water and groundwater matrices, collected as part of existing environmental studies. A mass-to-charge ratio of 144 ( m / z = 144) was added to an ICP-MS method to screen for REEs in filtered water samples submitted for metals analyses to the U.S. Geological Survey (USGS) National Water Quality Laboratory. We detected the presence of REEs above a reference threshold of 1200 counts per second in 18 % of pre-selected 6626 samples. Using this screened dataset, we mapped estimated dissolved REE concentrations across the United States in relation to ecoregions and underlying geology. Data are constrained to where sample collection took place but nevertheless show estimated aqueous dissolved REE concentrations on a geographic scale that has not yet been studied. To validate Q-STAR, REEs were measured in a USGS standard reference sample, a subset of 88 archived filtered water samples, and in fresh filtered surface water samples. Our targeted analyses demonstrated a strong linear relationship between Q-STAR predicted and measured values in all archived samples for Nd (r 2 = 0.94), and light REEs (LREEs) such as lanthanum (La) (r 2 = 0.93), praseodymium (Pr) (r 2 = 0.94) and samarium (Sm) (r 2 = 0.94). Using Q-STAR screen values, nine field sites were identified and surface water samples recollected to confirm the continued presence of Nd and LREEs. Q-STAR can be used to screen an unlimited number of water samples for the presence of REEs prior to time-intensive and costly quantitative analyses and to generate large REE datasets for further investigation.

Journal of Geochemical Exploration↗
USGS2025

Evaluation of solid bitumen created from marine oil shale bituminite under hydrous and anhydrous pyrolysis conditions

To test the influence of environmental conditions on aromaticity of solid bitumen generated during petroleum generation, four organic-rich (26–36 wt% total organic carbon) oil shale samples collected from the Neoproterozoic–Lower Cambrian restricted marine Salt Range Formation in the upper Indus Basin, Pakistan, were pyrolyzed under hydrous and anhydrous conditions. Experiments used closed system batch reactors at subcritical water temperatures between 300 and 370°C for 72 h. Thermal conversion of bituminite in the Salt Range oil shales created a newly formed solid bitumen, similar to previous observations from experiments on the Eocene lacustrine Green River Formation Mahogany zone oil shale. Newly formed solid bitumen in the Salt Range Formation oil shales generally has higher reflectance (R o ) in hydrous residues compared to anhydrous experiments subjected to the same time-temperature conditions, also similar to prior observations. This finding supports the hypothesis that radical disproportionation is favored in the presence of hydrogen contributed by water, promoting aromatization in the solid bitumen residue with concomitant increased expulsion of saturated hydrocarbons. Indigenous solid bitumen (and vitrinite in a comparison sample) also shows higher reflectance values in hydrous versus anhydrous residues, indicating that additional aromatization in the presence of exogenous hydrogen occurs both in newly formed organic matter and in organic matter that is present throughout the experiment. Despite similarities in their bulk rock geochemical screening parameters, R o evolution shows different trajectories amongst the four Salt Range oil shales, suggesting as-yet undetermined differences in kinetic properties which are probably related to differences in a priori chemical composition. These results have implications for the use of solid bitumen reflectance (BR o ) as a thermal proxy, suggesting BR o values and appearance could vary as a function of the concentration of water. Variation in water concentration may be present at the reservoir or formation scale, but may also be present at a much finer scale in tight oil shales where permeability is several orders of magnitude lower than conventional reservoirs. Therefore, local variations in the presence of water potentially could explain substantial variation in BR o values and appearance in closely spaced source rock samples and even within an individual microscope field.

Journal of Analytical and Applied Pyrolysis↗
USGS2025

Identifying precursors and tracking pulses of magma ascent in multidisciplinary data during the 2018–2023 phreatomagmatic eruption at Semisopochnoi Island, Alaska

The 2018–2023 phreatomagmatic eruptions at Semisopochnoi Island, Alaska produced abundant long-period (LP) seismicity, harmonic and broadband tremor, and explosion signals over several well-monitored periods of eruption and quiescence. The corresponding dataset provides an excellent opportunity to investigate precursory and syn -eruptive geophysical signals of long-lived phreatomagmatic eruptions using multiparameter observations. We generated explosion and LP event catalogs through novel implementations of the REDPy ( Hotovec-Ellis, 2024 ) repeating event detector in mid-2021 following a network upgrade and the onset of a new phase of the eruption. The hundreds of detected explosions show a high degree of infrasound waveform similarity over more than a year, indicating a repeating source mechanism likely associated with explosive magma-water interaction. The seismic LP catalog shows that events began over a month prior to renewed explosive activity at the beginning of August 2021, and that lower frequency index (FI) LPs were generated in the week prior to the onset of explosions. We applied a recently developed machine learning tool (VOISS-Net, Tan et al., 2024 ) to catalog abundant broadband and harmonic seismic tremor recorded before and during the renewed explosive activity, along with LPs and explosions. The tremor catalogs complement the LP and explosion catalogs by filling out the seismic sequence with the dominant signal types. Together, these catalogs reveal a seismic sequence of renewed unrest that started with several weeks of LP events, followed by LPs with lower FI values and harmonic tremor in the days prior to explosive activity, and finally the onset of discrete explosions and broadband eruption tremor. We interpret this sequence as the ascent of a new pulse of magma that first interacted with the hydrothermal/groundwater system to produce LPs, followed by harmonic tremor, and that ultimately drove explosive magma-water interactions and periods of continuous ash emissions. The 2021 seismic sequence, in combination with long-term records of satellite SO 2 emissions, deformation from interferometric synthetic aperture radar (InSAR) analysis, ash sample analysis, infrasound, and volcano tectonic seismicity, allows us to interpret the entire 9-year period of unrest and eruption that began with an intrusion and earthquake swarm in 2014.

Alaska↗
USGS2024

Will there be water? Climate change, housing needs, and future water demand in California

Climate change in California is expected to alter future water availability, impacting water supplies needed to support future housing growth and agriculture demand. In groundwater-dependent regions like California's Central Coast, new land-use related water demand and decreasing recharge is already stressing depleted groundwater basins. We developed a spatially explicit state-and-transition simulation model that integrates climate, land-use change, water demand, and groundwater gain-loss to examine the impact of future climate and land use change on groundwater balance and water demand in five counties along the Central Coast from 2010 to 2060. The model incorporated downscaled groundwater recharge projections based on a Warm/Wet and a Hot/Dry climate future from a spatially explicit hydrological process-based model. Two urbanization projections from a parcel-based, regional urban growth model representing 1) recent historical and 2) state-mandated housing growth projections were used as alternative spatial targets for future urban growth. Agricultural projections were based on recent historical trends from remote sensing data. Annual projected changes in groundwater balance were calculated as the difference between land-use related water demand, based on historical estimates, and climate-driven recharge plus agriculture return flows. Results indicate that future changes in climate-driven groundwater recharge, coupled with cumulative increases in agricultural water demand, result in overall declines in future groundwater balance, with a Hot/Dry future resulting in cumulative groundwater decline in all but Santa Cruz County. Cumulative declines by 2060 are especially prominent in San Luis Obispo (−2.9 to −5.1 Bm 3 ) and Monterey counties (−6.5 to −8.7 Bm 3 ), despite limited changes in agricultural water demand over the model period. These two counties show declining groundwater reserves in a Warm/Wet future as well, while San Benito and Santa Barbara County barely reach equilibrium. These results suggest future groundwater supplies may not be able to keep pace with regional demand and declining climate-driven recharge, resulting in a potential reduction in water security in the region. However, our county-scale projections showed new housing and associated water demand does not conflict with California's groundwater sustainability goals. Rather, future climate coupled with increasing agricultural groundwater demand may reduce water security in some counties, potentially limiting available groundwater supplies for new housing.

California↗
USGS2025

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California↗
USGS2025

Reaction kinetics and accelerant effects of sulfides in early mature hydrocarbon generation using hydrous pyrolysis

Hydrocarbon generation in organic-rich sediments is influenced by the molecular organic composition and relative abundance of associated minerals. Certain mineral-derived elements act as catalysts and reaction intermediaries, facilitating early-stage hydrocarbon formation in potential source rocks. This study investigated the role of sulfur contributed from pyrite as an accelerant in thermal reaction, focusing on its effects on early maturation and consequent hydrocarbon generation from gilsonite (low-sulfur solid petroleum). Hydrous pyrolysis (HP) experiments were conducted on mixtures of gilsonite and pyrite in varying ratios (1:0.1, 1:0.5, 1:1, 1:2, and 1:10 w/w gilsonite:pyrite) at 320, 350, and 370 °C for 72 h. Untreated and thermally altered residues were analyzed using solid bitumen reflectance (BR o , %), total organic carbon (TOC) content, programmed temperature pyrolysis, scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and X-ray diffraction (XRD) to evaluate the potential accelerant role of pyritic sulfur in hydrocarbon formation. The results show HP residues at 320 and 350 °C with greater pyrite concentrations had higher BR o , while reflectance values were similar in the 370 °C residues, regardless of pyrite concentration, suggesting enhanced reaction at lower thermal conditions. Increasing pyrite content systematically decreased hydrogen index (HI) values while increasing the transformation ratio (TR) and production index (PI), indicating enhanced conversion of organic matter to hydrocarbons with increasing pyrite concentrations. Gas yields increased with pyrite addition, particularly at 350 °C, confirming secondary cracking effects. However, gas production stabilized or declined at higher pyrite loadings (1:10), suggesting alternative reaction pathways such as coke formation. Our data indicate the presence of pyrite lowers the activation energy for thermal cracking, shifting peak experimental hydrocarbon generation temperatures downward by 20–30 °C, with the most pronounced accelerant effects observed at moderate pyrite concentrations (1:0.5 and 1:1). The thermodynamic framework reveals that pyrite stability is influenced by experimental conditions, with pyrrhotite formation favored in the presence of gilsonite due to reduced oxygen fugacity. Pyrite transformation to pyrrhotite, as observed through XRD, SEM-EDS, and predicted by thermodynamic data, further supports the accelerant role of S, as pyrrhotite exhibits a higher hydrogen transfer potential, promoting early oil generation. These findings highlight the importance of pyrite in modulating hydrocarbon generation pathways in organic-rich systems.

Journal of Analytical and Applied Pyrolysis↗
USGS2024

Characterization of change in tree cover state and condition over the conterminous United States

Variability in the effects of disturbances and extreme climate events can lead to changes in tree cover over time, including partial or complete loss, with diverse ecological consequences. It is therefore critical to identify in space and time the change processes that lead to tree cover change. Studies of change are often hampered by the lack of data capable of consistently detecting different types of change. Using the Landsat satellite record to create a long time-series of land cover and land cover change, the U.S. Geological Survey Land Change Monitoring Assessment and Projection (LCMAP) project has made an annual time series of land cover across the conterminous United States for the period 1985 to 2018. Multiple LCMAP products analyzed together with map validation reference plots provide a robust basis for understanding tree cover change. In LCMAP (Collection 1.2), annual change detection is based on harmonic model breaks calculated at each Landsat pixel from the Continuous Change Detection and Classification (CCDC) algorithm. The results showed that the majority of CCDC harmonic model breaks (signifying change) indicated partial tree cover loss (associated with management practices such as tree cover thinning) as compared to complete tree cover loss (associated with practices like clearcut harvest or fire disturbance). Substantially fewer occurrences of complete tree cover loss were associated with change in land cover state. The area of annual tree cover change increased after the late 1990s and stayed high for the rest of the study period. The reference data showed that tree harvest dominated across the conterminous United States. The majority of tree cover change occurred in evergreen forests. Large estimates of disturbance-related tree cover change indicated that tree cover loss may have previously been underreported due to omission of partial tree cover loss in prior studies. This has considerable implications for forest carbon accounting along with tracking ecosystem goods and services.

Forests↗
USGS2026

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction The reports and maps of our Nation’s geological surveys inform and benefit the public, private industry, government officials, and scientists. The use of clear and consistent nomenclature and classifications can improve communication of data and interpretations. Since 1899, the U.S. Geological Survey (USGS) Geologic Names Committee (GNC) has been responsible for defining standards that promote uniform geologic nomenclature and classifications among geoscientists. The GNC periodically publishes a geologic time scale, the “Divisions of Geologic Time,” that serves as the national standard for USGS publications (for example, refer to Orndorff and others, 2023). Authors may use other published geologic time scales, such as those of the Geological Society of America (GSA) or the International Commission on Stratigraphy (ICS), provided that they are clearly specified and referenced. Access to the USGS, GSA, and ICS geologic time scales is also available from the U.S. Geologic Names Lexicon (Geolex) website https://ngmdb.usgs.gov/Geolex/stratres/timescales. The geologic time scale serves a dual purpose by enabling authors to distinguish earth material units by position (chronostratigraphic) and time (geochronologic), as outlined in order of decreasing rank.

Fact Sheet↗
USGS2025

Widespread occurrence of former anhydrite phenocrysts in Laramide-age magmas related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, USA

Reports of magmatic anhydrite are relatively rare, with only ~30 occurrences documented worldwide so far. However, magmatic anhydrite saturation is difficult to recognize because anhydrite decomposes rapidly in near-surface environments. In most cases, only anhydrite inclusions shielded within other phenocryst phases were able to survive. Alternatively, since anhydrite phenocrysts preserved in fresh volcanic rocks are characteristically intergrown with apatite phenocrysts, the former presence of anhydrite phenocrysts can be recognized based on the occurrence of lath-shaped cavities that show a strong spatial association with apatite phenocrysts. These cavities can be either empty or filled with low-temperature, secondary minerals such as zeolites, carbonates, or microcrystalline silica. A systematic search for the occurrence of such cavities, combined with optical and Raman-spectroscopic identification of anhydrite inclusions preserved within apatite, hornblende and quartz phenocrysts, demonstrates that most of the Laramide-age magmas associated with the Santa Rita and Hanover-Fierro porphyry-skarn Cu (Zn, Mo, Au, Pb) deposits were saturated in magmatic anhydrite. The anhydrite typically coexisted with monosulfide solid solution (MSS), suggesting oxygen fugacities of ~2.0±0.5 log units above the fayalite-magnetite-quartz buffer. The magmas range from andesitic to rhyodacitic in composition, and from shortly pre-mineralization (~61 Ma) to shortly post-mineralization (~57 Ma) in age. In three samples with particularly well-recognizable former anhydrite phenocrysts, their modal abundance could be quantified based on high-resolution scans of polished hand specimens. The observed modal anhydrite abundances of 0.63–1.8 vol% translate into minimum magma sulfur contents of 0.20–0.56 wt% S. The highest sulfur content of 0.56 wt% S is difficult to reconcile with available anhydrite solubility models, but it could be reproduced in an anhydrite solubility experiment performed at 950 °C and 1.15 GPa on a natural latite containing 13.1 wt% dissolved H2O. The sample with the second-highest sulfur content of 0.26 wt% S requires ~10 wt% H2O in the silicate melt, and, consequently, a minimum pressure of ~0.5 GPa. Taken together, the results suggest that the magmas of the Central Mining District were extremely hydrous and thus originated from great depth. Indeed, their major element compositions and reconstructed H2O and S contents agree well with experimentally observed and numerically predicted compositions of residual silicate melts after 50–70 wt% crystallization of ordinary arc basalts at high pressure and high oxygen fugacities.

New Mexico↗
USGS2026

Mineral chemistry perspective on remobilization of stored magma at Kamakai'a Hills, Southwest Rift Zone of Kilauea, Island of Hawai'i, USA

Differentiated magmas stored in the rift zones of Kīlauea have received more attention in recent years following eruption of andesite during the early phase of 2018 lower East Rift Zone activity. Despite this growing interest, some of the most voluminous eruptions of differentiated rift zone magmas remain poorly studied. One such eruption, and the most voluminous exposed differentiated flow field at Kīlauea, is the Kamakaiʻa Hills. This eruption took place in the Southwest Rift Zone of Kīlauea, a region that is hypothesized to contain a long-lived rift zone reservoir. The Kamakaiʻa Hills flow field encompasses >250 × 10 6 m 3 of basaltic andesite and basalt compositions with a mineral assemblage of orthopyroxene + clinopyroxene + plagioclase during its early ʻaʻā phase and clinopyroxene + plagioclase + olivine during its late pāhoehoe phase. To better understand storage conditions and magma accumulation, this study focuses on major, minor, and trace elements from the mineral assemblage present within the early ʻaʻā and late pāhoehoe phases. The diversity of clinopyroxene and plagioclase compositions within the early ʻaʻā and late pāhoehoe phases, as well as diverse compositions of plagioclase and orthopyroxene within the early ʻaʻā phase, suggest multiple magma bodies and limited pre-eruption magma mixing within the broader Kamakaiʻa Hills reservoir. Oscillatory zoning patterns (particularly in clinopyroxene) imply processes such as recharge events, magma mixing or mingling, or convection within a differentially cooling, chemically stratified reservoir over protracted time intervals, whereas only limited resorbed mineral textures indicate incomplete mixing of heat and chemically distinct magmas during the dike intrusion that triggered the eruption. Mineral-mineral and mineral-melt thermobarometry indicate predominantly shallow (≤2.5 km depth) crustal storage conditions of the cooled, differentiated magma (∼1100 °C and cooler for the basaltic andesites) to hotter temperatures for the basalts (all >1100 °C). Despite the known large standard errors estimated for mineral-melt and mineral-mineral barometry (10s to >100 MPa), the calculated pressures and depths broadly correspond with earthquake swarm depths beneath the Kamakaiʻa Hills, and drill core and fluid inclusion barometry storage depths of differentiated magmas within the lower East Rift Zone. The Kamakaiʻa Hills differentiated magmas have H 2 O contents (∼0.5 wt%, using plagioclase-melt hygrometry) equivalent to typical Kīlauea basalts. Our data and interpretations demonstrate a complex, long-lived rift zone storage system that consisted of multiple magma bodies and was mobilized into eruption through intrusion of a hotter and more primitive summit-derived (uprift) magma.

Hawaii↗
USGS2026

Small-volume tephra deposits of the May 1924 explosions from Halemaʻumaʻu, Kīlauea volcano, and their origin

More than 50 explosive eruptions occurred from Halemaʻumaʻu at Kīlauea volcano over 17 days from May 11 to 27, 1924. Ballistics weighing as much as 14,000 kg were ejected and most landed within 2 km of the vent. Fine ash made up a major component of the tephra and was dispersed tens of kilometers downwind. Draining of the Halemaʻumaʻu lava lake occurred in late February 1924, with the crater floor eventually subsiding by a further ∼70 m (to ∼180 m below the crater rim) by the time the first explosions took place during the night of May 10–11. The largest explosions occurred on May 17–18 and smaller explosions continued until May 27, at which point Halemaʻumaʻu had more than doubled in width and depth. The explosions generated plumes reaching up to ∼10 km high with ballistics ejected up to 2 km from the crater. Almost 100 years later, we investigate and characterize the preserved tephra deposits within ∼3 km of the 1924 crater rim. Grain size and shape analyses were performed on 202 samples collected from 34 tephra profiles using dynamic image analysis, with a subset of layers from nine tephra profiles used for componentry (200 grains per layer in the 0.5–1 mm size fraction). Additionally, we characterize the average diameters (using the five largest clasts) at 216 locations and measure the average diameters of 2291 ballistics (largest per ∼100 m 2 area). Physical descriptions from fieldwork and grain size distributions were used to subdivide the tephra layers into five lithofacies: coarse homogeneous, fine homogenous, red ash, accretionary lapilli-bearing, and finely laminated. Grain size versus shape data show a range of values that demonstrate most grains are dense, smooth, and equant, in alignment with lithic clasts dominating the tephra componentry. The fine grained and accretionary lapilli-bearing nature of some of these lithofacies confirms that water influenced the style of the explosions. However, we also note juvenile clasts within many of the tephra layers, indicating that many of the layers were formed during phreatomagmatic explosions (sensu stricto), despite the eruptive mechanism being dominantly phreatic. Juvenile clasts are more abundant higher in the tephra profiles, suggesting that juvenile magma was more involved later in the explosive sequence. Thermal and hydrologic modeling indicate that groundwater inflow into a short-lived, small-diameter volcanic conduit (10-m to 120-m-diameter used for modeling) during the 78–85 days preceding the first explosion provides a physically plausible mechanism for this eruptive sequence.

Hawaii↗
USGS2026

Effects of a low-lipid diet on the gut microbiome and head kidney transcriptome of juvenile Chinook Salmon

Objective Pacific salmon Oncorhynchus spp. reared in production hatcheries are typically fed high-lipid, energy-dense diets to achieve large size and high body condition prior to release. In contrast, juveniles in natural environments tend to consume low-lipid, high-protein diets, and fish reared for research or conservation purposes are sometimes fed diets that are formulated to mimic natural diets and promote wild-like phenotypes. Understanding how these alternative diets affect fish health beyond growth and body condition could ultimately contribute to improving hatchery fish fitness. Methods In this work, we evaluated changes in the fecal microbiome and gene expression of juvenile Chinook Salmon O. tshawytscha on a standard high-lipid hatchery diet versus a low-lipid diet formulated to mimic the nutrition profile of natural-origin fish. To evaluate the time scale at which diet alters the fecal microbiome, we collected longitudinal samples over a 12-week period and switched the diets of a subset of fish twice during the experiment. We used 16S ribosomal RNA gene amplicon sequencing to characterize fecal microbiome differences between fish on the two diets as well as hatchery-reared fish at a production hatchery, hatchery fish that had been captured after release into a stream, and natural-origin, stream-reared fish of similar ages. Additionally, we conducted RNA sequencing on head kidney samples from laboratory-reared fish to evaluate changes in gene expression in this important immune organ. Results We found that the low-lipid diet and the hatchery diet resulted in microbiomes that differed from the microbiome of natural-origin fish and from each other and that diet-driven changes to the microbiome could occur in under 14 d. The low-lipid diet did not result in a microbiome that resembled the microbiome of naturally produced fish. Instead, the low-lipid diet resulted in a microbiome community that was distinct from those of fish reared on the hatchery diet and fish sampled from the wild. The RNA sequencing results indicated differential enrichment of pathways related to immunity, metabolism, and hormone synthesis between fish that were fed the two experimental diets. Conclusions The results suggest that additional environmental factors influence the microbiome more strongly than diet formulation or that the low-lipid diet has a smaller effect on the microbiome than a natural, ­invertebrate-based diet. Given that the gut microbiome and systemic immune function contribute significantly to disease resistance, our findings highlight the importance of understanding how diets fed to fish in captivity may affect fish health beyond growth and body condition metrics.

Journal of Aquatic Animal Health↗
USGS2026

A three-dimensional geologic framework model of the northern Great Plains region of Montana, North Dakota, South Dakota, and Wyoming, USA

This report presents a new three-dimensional geologic framework model (GFM) of the northern Great Plains region, encompassing parts of Montana, North Dakota, South Dakota, and Wyoming. The model provides a regionally consistent, geographic information system (GIS)-ready representation of Phanerozoic sedimentary strata, major fault systems, and Precambrian basement geometry across two sedimentary basins and adjacent uplifts. More than 300,000 geologic and geophysical data inputs were synthesized to model 41 stratigraphic horizons and 47 faults, yielding an internally coherent, sealed-volume interpretation of the subsurface. The modeling workflow developed for this study demonstrates an efficient and scalable approach for constructing basin-to regional-scale GFMs in geologically complex and data-variable settings. Although model fidelity varies with data density and quality, the resulting geometry is broadly consistent with 1:500,000-scale geologic mapping and highlights areas where additional geologic study is most needed. The three-dimensional GFM provides a foundational framework to support groundwater, energy, and mineral resource assessments, and offers a transferable methodology for potential future U.S. Geological Survey efforts to build large-area subsurface models in underexplored regions of the United States.

Montana, North Dakota, South Dakota, Wyoming↗
USGS2026

New constraints on northeast Seattle basin structure from converted seismic waves

The Seattle basin is a deep sedimentary basin in the Seattle–Bellevue, Washington metropolitan area within the Puget Lowland of Washington State. We determine the structure of a portion of the basin and the underlying basement using analysis of P waves converted from direct S incident from below. A deep local crustal event beneath Monroe, about 35 km northeast of Seattle, was recorded by a 100‐station nodal array deployed in 2019. The event produced a variety of coherent seismic phases, including converted waves from the sediment—basement boundary, internal structure within the basin, and additional crustal discontinuities. Using observed Sp converted waves, we apply an adjoint‐based full waveform inversion (FWI) method to determine the amplitude and extent of seismic discontinuities at depth. We find the strongest source of converted waves for this event lies ∼6 to 7 km depth below northern Lake Washington, interpreted to be the local depth to basement rock. The newly imaged shallow basement structure may be part of a deformation zone associated with the Siletzia eastern boundary. Our results highlight the utility of converted seismic waves recorded by a dense array, combined with an FWI method, to illuminate crustal structure.

Washington↗