Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geochronology, Thermochronology and Time Scale Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,664 records · Page 12Linked to original sources
USGS1976

Detailed investigation of a coastal plain-Piedmont fault contact in northeastern Virginia

A trench across the Dumfries fault of the Stafford fault zone near Stafford, Virginia (see Mixon and Newell, 1976) exposed a high-angle reverse fault juxtaposing Paleozoic Quantico Slate and Cretaceous Potomac Group rocks. A system of subsidiary reverse faults and small scale normal faults disrupt the Coastal Plain strata adjacent to the main fault. Cross-cutting relations and stratigraphic details indicate that the subsidiary faults in the Cretaceous rocks document a history of episodic deformation, in part active during accumulation of the Coastal Plain strata. Slickensides and stereo net analysis of theorientation of subsidiary reverse faults, normal faults, and bedding indicate that, through time, faulting consistently included right lateral separation.

Virginia↗
USGS2024

Seismic velocity changes from repetitive seismicity at Mauna Loa prior to and during its 2022 eruption

Mauna Loa’s short-lived eruption from late November to early December 2022 marked the culmination of nearly a decade of elevated seismic activity and geodetic inflation. The volcano has been monitored by a network of permanent, short period and broadband seismometers. I used the continuous waveform data from that network starting in 2012 to generate a catalog of seismicity that enhances the US Geological Survey Hawaiian Volcano Observatory’s public seismic catalog with four times the number of earthquakes, which were then grouped by waveform similarity. Analysis of subtle delays in the timing of arrivals of scattered waves between pairs of earthquakes in this catalog yields a history of small changes in the shallow seismic velocity structure of the volcano. Seismic velocities have been shown at other volcanoes to change during unrest and eruption. My results show a decrease in seismic velocity centered on the summit beginning in September 2022, corresponding to the onset of a vigorous precursory swarm of seismic activity and shallow inflation. During the eruption itself, I observe large changes due likely to dike opening along the northeast rift zone and deflation of the summit reservoir. However, seismic velocity changes associated with non-volcanic sources such as ground shaking from large earthquakes and meteorological influences at seasonal and diurnal time scales are also observed, and these dominate the velocity changes prior to the eruption. Proper accounting of these effects will be a requirement for use in real-time monitoring, and this work serves as a starting point in that endeavor for Mauna Loa.

Hawaii↗
USGS2026

Mineral chemistry perspective on remobilization of stored magma at Kamakai'a Hills, Southwest Rift Zone of Kilauea, Island of Hawai'i, USA

Differentiated magmas stored in the rift zones of Kīlauea have received more attention in recent years following eruption of andesite during the early phase of 2018 lower East Rift Zone activity. Despite this growing interest, some of the most voluminous eruptions of differentiated rift zone magmas remain poorly studied. One such eruption, and the most voluminous exposed differentiated flow field at Kīlauea, is the Kamakaiʻa Hills. This eruption took place in the Southwest Rift Zone of Kīlauea, a region that is hypothesized to contain a long-lived rift zone reservoir. The Kamakaiʻa Hills flow field encompasses >250 × 10 6 m 3 of basaltic andesite and basalt compositions with a mineral assemblage of orthopyroxene + clinopyroxene + plagioclase during its early ʻaʻā phase and clinopyroxene + plagioclase + olivine during its late pāhoehoe phase. To better understand storage conditions and magma accumulation, this study focuses on major, minor, and trace elements from the mineral assemblage present within the early ʻaʻā and late pāhoehoe phases. The diversity of clinopyroxene and plagioclase compositions within the early ʻaʻā and late pāhoehoe phases, as well as diverse compositions of plagioclase and orthopyroxene within the early ʻaʻā phase, suggest multiple magma bodies and limited pre-eruption magma mixing within the broader Kamakaiʻa Hills reservoir. Oscillatory zoning patterns (particularly in clinopyroxene) imply processes such as recharge events, magma mixing or mingling, or convection within a differentially cooling, chemically stratified reservoir over protracted time intervals, whereas only limited resorbed mineral textures indicate incomplete mixing of heat and chemically distinct magmas during the dike intrusion that triggered the eruption. Mineral-mineral and mineral-melt thermobarometry indicate predominantly shallow (≤2.5 km depth) crustal storage conditions of the cooled, differentiated magma (∼1100 °C and cooler for the basaltic andesites) to hotter temperatures for the basalts (all >1100 °C). Despite the known large standard errors estimated for mineral-melt and mineral-mineral barometry (10s to >100 MPa), the calculated pressures and depths broadly correspond with earthquake swarm depths beneath the Kamakaiʻa Hills, and drill core and fluid inclusion barometry storage depths of differentiated magmas within the lower East Rift Zone. The Kamakaiʻa Hills differentiated magmas have H 2 O contents (∼0.5 wt%, using plagioclase-melt hygrometry) equivalent to typical Kīlauea basalts. Our data and interpretations demonstrate a complex, long-lived rift zone storage system that consisted of multiple magma bodies and was mobilized into eruption through intrusion of a hotter and more primitive summit-derived (uprift) magma.

Hawaii↗
USGS2024

Global geologic map of Europa

Discovered by Galileo Galilei more than 400 years ago and imaged in detail by the Voyager 2 Galileo spacecraft, Jupiter’s icy moon Europa has been a source of intrigue. A range of science investigations indicate that it contains the key ingredients for habitability, notably energy, chemistry, and liquid water. Europa’s surface is geologically complex and, based on the dearth of impact craters, interpreted to be as young as ~60 Ma. The array of geologic features that characterize the surface include extensive ridged plains, regions of broad disruption termed chaotic terrain, long, quasi-linear ridges that span thousands of kilometers, and bands as much as 60 kilometers wide and that extend 100s of kilometers. These features, along with other geophysical measurements, indicate the presence of a global briny liquid water ocean beneath the ice shell. It was not until the arrival of the Galileo spacecraft in 1995 that the true nature and level of complexity of the surface was revealed. Although image data returned by Galileo provided insight into the structure of a variety of regions, the entire satellite has yet to be observed at a regional scale (less than 250 meters per pixel) and the detailed geologic nature of much of its surface remains a mystery. Establishing the global context of the distribution and timing of Europan geologic units forms a basis to understand regional and local scale processes, serves as a tool for the planning of future missions, and most of all is essential to gaining insight into the potential habitability of this icy world.

Scientific Investigations Map↗
USGS2024

Unscrambling the Proterozoic supercontinent record of northeastern Washington State, USA

The time interval from Supercontinent Nuna assembly in the late Paleoproterozoic to Supercontinent Rodinia breakup in the Neoproterozoic is considered by some geologists to comprise the “Boring Billion,” an interval possibly marked by a slowdown in plate tectonic processes. In northeastern Washington State, USA, similar to much of western Laurentia, early workers generally thought the tectonostratigraphic framework of this interval of geologic time consisted of two major sequences, the (ca. 1480–1380 Ma) Mesoproterozoic Belt Supergroup and unconformably overlying (<720 Ma) Neoproterozoic Windermere Supergroup. However, recent research indicates that strata considered by early workers as Belt Supergroup equivalents are actually younger, and a post-Belt, pre-Windermere record is present within the <1360 Ma Deer Trail Group and <760 Ma Buffalo Hump Formation. Thus, the northeastern Washington region perhaps comprises the most complete stratigraphic record of the “Boring Billion” time interval in the northwestern United States and holds important insights into global Proterozoic supercontinent tectonic processes. In light of these exciting developments, this field guide will address the early historic economic geology and original mapping of these Proterozoic sequences in the northeastern Washington region, and from that foundation explore more recent isotopic provenance data and their regional to global context. Finally, the guide will end with a discussion of remaining questions with a goal of stimulating interest in these relatively understudied, yet important, rocks.

Washington↗
USGS2026

Critical minerals in zinc ore—An update on Earth Mapping Resources Initiative Research in the Boulder Batholith region, Montana

Plain Language Summary U.S. Geological Survey research, in collaboration with Montana Technical University and Montana Bureau of Geology and Mines, is providing key critical mineral information that may have potential for critical mineral production of several mining districts in the Boulder Batholith region, to better understand the abundance and distribution of natural resources within this region. Continued research can be used to show the potential for previously undiscovered critical mineral resources in southwestern Montana and in other parts of the United States.

Montana↗
USGS2026

Biome-scale spatial patterns of avian abundance reveal proactive conservation opportunities in North American grasslands

North American grassland birds have experienced steeper population declines than any other avian guild, yet conservation efforts remain largely reactive and fragmented. We used nearly four decades of North American Breeding Bird Survey data to identify biome-scale spatial patterns (clustering) of grassland bird abundance for the Great Plains. Our results reveal an ecological core in the north-central Plains where community-level abundance is either increasing by >100% or remains high and stable, providing a strategic roadmap for a “Defend the Core” conservation approach. This approach flips the script from reactive triage centered on isolated population fragments to a proactive strategy of maintaining large-scale ecosystem integrity. Conversely, we found that population losses are more spatially clustered than wins, reflecting the relentless, one-way movement of woody encroachment and agricultural conversion. This asymmetry supports prioritizing intact landscapes, as current restoration rates are often outpaced by the scale of habitat loss. Notably, we found that community-level spatial clustering is a more robust indicator of biome condition than trends of individual flagship species, suggesting that managing for ecosystem integrity provides a more effective multi-species umbrella. Given our results, there is an opportunity for operationalizing a Great Plains Conservation Design that is ecosystem-centric and rooted in the sustainability of the private-land cattle production that maintains these open spaces. By leveraging avian abundance as a biological sensor, managers and producers can deploy a shared vision that matches the spatial scale of the threats, moving from reactive triage to proactive defense of core working grasslands in North America.

Great Plains biome↗
USGS2025

The U.S. Geological Survey National Water Quality Network—Groundwater, 2024

The U.S. Geological Survey (USGS) operates a National Water Quality Network (NWQN) to monitor trends in groundwater quality and assess emerging contaminants of concern. It is a “network of networks” with 81 subnetworks being sampled on a decadal time scale. Each year, 8 of the subnetworks are sampled. Subnetworks have 20–30 wells each and include studies of domestic supply wells or shallow groundwater (20–50 feet deep) underlying urban land use or agricultural land use. Currently there are 2,089 wells in the network. All wells are sampled for physical properties, nutrients, major ions, trace elements, per- and polyfluoroalkyl substances (PFAS), and a subset of wells are sampled for pesticides, volatile organic compounds, radionuclides, and microbiological contaminants.

Contiguous United States↗
USGS2026

The United States Magnetotelluric Array and the National Impedance Map

The United States Magnetotelluric Array (USMTArray) data set, collected in the years 2006–2024, consists of more than 1,700 long-period magnetotelluric stations covering the entirety of the contiguous United States on a quasi-regular 70 km grid. Funding across multiple federal agencies was critical to sustaining this effort to its completion. Important components of the project included active guidance and participation from the MT community, the open and timely availability of all data, and the application of consistent instrumentation and robust data processing. Together with parallel advancement in the development of publicly available three-dimensional (3D) inversion codes, the USMTArray has revitalized the US magnetotelluric community and increased the visibility of magnetotellurics within the Earth-science community. Taken as a whole, these data are visualized as the National Impedance Map, which, together with a 3D synthesis conductivity model of the nation, reveals the electrical architecture of the contiguous US. USMTArray data are used by researchers worldwide for fundamental and applied studies, including investigations of continental architecture and evolution, estimation of hazards to critical infrastructure due to geomagnetic storms, and assessment of the nation's undiscovered geothermal and mineral resources. We here review the history and development of the project, discuss the challenges and successes in its execution, present the National Impedance Map and synthesis conductivity model, and highlight the breadth of research stemming from this rich data set.

conterminous United States↗
USGS2026

Small-volume tephra deposits of the May 1924 explosions from Halemaʻumaʻu, Kīlauea volcano, and their origin

More than 50 explosive eruptions occurred from Halemaʻumaʻu at Kīlauea volcano over 17 days from May 11 to 27, 1924. Ballistics weighing as much as 14,000 kg were ejected and most landed within 2 km of the vent. Fine ash made up a major component of the tephra and was dispersed tens of kilometers downwind. Draining of the Halemaʻumaʻu lava lake occurred in late February 1924, with the crater floor eventually subsiding by a further ∼70 m (to ∼180 m below the crater rim) by the time the first explosions took place during the night of May 10–11. The largest explosions occurred on May 17–18 and smaller explosions continued until May 27, at which point Halemaʻumaʻu had more than doubled in width and depth. The explosions generated plumes reaching up to ∼10 km high with ballistics ejected up to 2 km from the crater. Almost 100 years later, we investigate and characterize the preserved tephra deposits within ∼3 km of the 1924 crater rim. Grain size and shape analyses were performed on 202 samples collected from 34 tephra profiles using dynamic image analysis, with a subset of layers from nine tephra profiles used for componentry (200 grains per layer in the 0.5–1 mm size fraction). Additionally, we characterize the average diameters (using the five largest clasts) at 216 locations and measure the average diameters of 2291 ballistics (largest per ∼100 m 2 area). Physical descriptions from fieldwork and grain size distributions were used to subdivide the tephra layers into five lithofacies: coarse homogeneous, fine homogenous, red ash, accretionary lapilli-bearing, and finely laminated. Grain size versus shape data show a range of values that demonstrate most grains are dense, smooth, and equant, in alignment with lithic clasts dominating the tephra componentry. The fine grained and accretionary lapilli-bearing nature of some of these lithofacies confirms that water influenced the style of the explosions. However, we also note juvenile clasts within many of the tephra layers, indicating that many of the layers were formed during phreatomagmatic explosions (sensu stricto), despite the eruptive mechanism being dominantly phreatic. Juvenile clasts are more abundant higher in the tephra profiles, suggesting that juvenile magma was more involved later in the explosive sequence. Thermal and hydrologic modeling indicate that groundwater inflow into a short-lived, small-diameter volcanic conduit (10-m to 120-m-diameter used for modeling) during the 78–85 days preceding the first explosion provides a physically plausible mechanism for this eruptive sequence.

Hawaii↗
USGS2024

Streamflow depletion caused by groundwater pumping: Fundamental research priorities for management-relevant science

Reductions in streamflow caused by groundwater pumping, known as “streamflow depletion,” link the hydrologic process of stream-aquifer interactions to human modifications of the water cycle. Isolating the impacts of groundwater pumping on streamflow is challenging because other climate and human activities concurrently impact streamflow, making it difficult to separate individual drivers of hydrologic change. In addition, there can be lags between when pumping occurs and when streamflow is affected. However, accurate quantification of streamflow depletion is critical to integrated groundwater and surface water management decision making. Here, we highlight research priorities to help advance fundamental hydrologic science and better serve the decision-making process. Key priorities include (a) linking streamflow depletion to decision-relevant outcomes such as ecosystem function and water users to align with partner needs; (b) enhancing partner trust and applicability of streamflow depletion methods through benchmarking and coupled model development; and (c) improving links between streamflow depletion quantification and decision-making processes. Catalyzing research efforts around the common goal of enhancing our streamflow depletion decision-support capabilities will require disciplinary advances within the water science community and a commitment to transdisciplinary collaboration with diverse water-connected disciplines, professions, governments, organizations, and communities.

Water Resource Research↗
USGS2025

U.S. Geological Survey research and assessments supporting carbon dioxide removal

Both carbon capture and storage (CCS) and carbon dioxide removal (CDR) are methods to limit future global temperature rise and ocean acidification. CCS sequesters (stores) carbon dioxide (CO2) captured from industrial sources thereby preventing the CO2 from reaching the atmosphere. The captured CO2 is injected into underground geologic reservoirs or is converted into stable industrial products. CDR enhances natural processes or uses technical approaches to remove excess CO2 from the atmosphere. Carbon dioxide is sequestered in natural sinks such as vegetation and soil, or injected into underground reservoirs or converted into durable products. The U.S. Geological Survey (USGS) conducts research and resource assessments that support biologic and geologic CDR approaches. This report will review some of the ongoing USGS CDR research and assessment efforts.

Conference Paper↗
USGS2025

Multi-scale geophysical imaging of a hydrothermal system in Yellowstone National Park, USA

Little is known about the local plumbing systems that fuel Yellowstone’s famous hot springs, geysers and mud pots. A multi-method, multi-scale geophysical investigation was carried out in the Obsidian Pool Thermal Area (OPTA) to: (i) delineate the lateral extent of the hydrothermal area and associated surface features; (ii) estimate the dimensions of the upflow zone and identify its main controlling structures; (iii) assess fluids circulation pathways from depth to surface. Ground and airborne geophysical data were acquired to connect local and regional scales, from shallow to large depths. Maps of surface electrical resistivity show a strong correlation with hydrothermal features. At in-termediate depths, electrical resistivity permits delineating the upper limit of the upflow zone, while Poisson’s ratio highlights differences in subsurface fluid content. Combining these results with surface observations and topographic information, we speculate that differential mixing of hydrothermal and fresh water could explain the wide diversity of features observed at OPTA. Low electrical resistivity observed at large depths also suggest that a vast upflow zone, controlled by rhyolite flows and conjugate faults, underlies the OPTA. We speculate that hydrothermal fluids rise along fractures and reach the surface in topographic lows to form hydrothermal features. Our results show that synoptic, multi-scale geophysical measurements provide a roadmap for understanding where and how geologic heterogeneity, topography, fluid-gas separation, and the mixing of thermal and meteoric waters conspire to produce the wide variety of Yellowstone’s renowned hydrothermal features.

Wyoming↗
USGS2025

Paleoseismology and paleogeodesy using coral microatolls

Establishing the rupture extent and slip distribution of individual paleo-earthquakes is vital for assessing fault behavior including the persistence of rupture segmentation, recurrence patterns, and similarity of successive events, key issues in both fault mechanics and hazard assessment. Techniques with high temporal and geodetic precision as well as a wide distribution of study sites are necessary to investigate past earthquakes in such detail. Coral microatoll growth is one of the best types of geologic record for paleoseismology and paleogeodesy given these needs, as it provides long, continuous, widely distributed records of centimeter-scale vertical tectonic motion with potentially annual-level temporal precision. This chapter describes the process of interpreting microatoll growth records to obtain time series of relative sea level, tectonic vertical deformation fields, and finally slip and coupling parameters on an underlying fault interface.

Book chapter↗
USGS2025

High frequency and region-scale simulations of large (Mw7+) earthquakes on the southern Whidbey Island fault, Washington, USA

We simulate ground shaking in western Washington State from hypothetical M w 7.0–7.5 earthquakes on the southern Whidbey Island fault (SWIF). Ground motions are modeled considering kinematic source distributions on a complex fault plane, a 3D seismic velocity model, and region‐specific soil velocity models. We run simulations with varying model resolutions, including regional‐scale simulations with a maximum‐modeled frequency of ∼1 Hz and local‐scale simulations with a maximum‐modeled frequency of ∼2.5 Hz. Additional local‐scale simulations are run considering high‐resolution surface topography. We explore how source parameters (i.e., magnitude, hypocenter location, and dip direction) and 3D velocity structure impact peak shaking intensity and its variability. In particular, we find that earthquakes on the SWIF would likely produce strong shaking throughout the populated Puget Lowland, including in the cities of Everett, Seattle, Bellevue, and Tacoma, Washington. Simulated short‐period ( T ≤ 2 s) spectral accelerations are strong throughout the Puget Lowland, and long‐period shaking ( T ≥ 5 s) is strong in the deep regional sedimentary basins, especially the Everett and Seattle basins. Source parameters strongly influence intra‐ and interevent variability in response, primarily through changes in source and site geometry, as well as rupture directivity. We also note a potential coupling between rupture directivity and basin effects, wherein directivity pulses are seemingly guided through the region’s deep, interconnected sedimentary basins. Overall, this work highlights the impacts of 3D source, path, and site effects on seismic hazard in the U.S. Pacific Northwest and substantially expands the catalog of simulated ground motions for Puget Sound area crustal faults.

Washington↗
USGS2026

Remote sensing enables basin-scale inventories of coal mine methane

Underground coal mines are important global sources of methane, but emission estimates are uncertain. We show that emission estimates for individual mines from aircraft remote-sensing surveys in the United States agree within 40% with direct measurements used for national emission reporting (IPCC Tier 3 estimate). Such direct measurements are unavailable in most countries, which rely on estimated emission factors (EFs) applied to coal-production rates. We find that EFs from IPCC Tier 1 and the Model for Calculating Coal Mine Methane (MC2M) methods overestimate U.S. emissions 3-fold due to incorrect dependence on mine depth. An IPCC Tier 2 method using measured basin-specific mine gas content agrees with direct emission measurements but does not account for gob well emissions and requires gas content data that are generally unavailable. We show that aircraft remote sensing for a small sample of mines can successfully estimate basin-specific EFs for ventilation shafts and gob wells, enabling estimates of basin- and national-scale emissions. We discuss how the method can be applied with satellite remote sensing to quantify coal emissions worldwide.

Alabama, Colorado, Kentucky, New Mexico, Ohio, Pen↗
USGS2025

Effect of land cover type on 3D deformation recovery from synthetically deformed high-resolution satellite optical imagery

The limits of detection for earthquake surface deformation in the spatial domain have improved with advances in remote sensing imagery data availability, resolution, and analysis. Sub-pixel correlation and digital elevation model (DEM) differencing from sub-meter, earthquake-spanning satellite optical imagery has enhanced surface rupture mapping and deformation measurements. However, knowledge of measurement accuracy and uncertainty is limited. To address this, we construct orthophotos and digital elevation models (DEMs) from repeat high resolution (∼0.5 m) satellite optical imagery along two sections of the Garlock fault, California with clear fault geomorphology and differing land cover. We deform later sets of DEMs and images with synthetic earthquakes containing both diffuse and discrete horizontal and vertical displacements. Sub-pixel image correlation and DEM differencing demonstrate how vegetation degrades recovered displacement accuracy. In barren land cover, horizontal displacements are detectable to an expected ∼1/10th-pixel size. With shrubs, trees, and grass, detectable displacements increase to >1/2-pixel size, and filtering results by correlation score and using elevation values as input rather than image values improves accuracy. Vertical displacement detection thresholds remain lower in vegetation, at >1-pixel size. Higher slope angles degrade displacement recovery, worsened by vegetation. Diminishing seasonal separation improves accuracy over vegetated regions, though not to the level achieved in barren environments. These results will inform research and operational efforts on the utility of high resolution satellite optical imagery for detecting deformation in varied land cover. Furthermore, they reveal where alternative measurements, such as from LiDAR or radar interferometry, are required to mitigate the effects of vegetation and capture fine-scale crustal deformation.

California↗
USGS2025

Engineering and risk research—A strategic vision for extending USGS earthquake science to risk assessment and mitigation

As a part of the U.S. Geological Survey (USGS) Natural Hazards Mission Area, the Engineering and Risk Project (ERP) of the Geologic Hazards Science Center conducts civil engineering research to extend natural hazards science to risk assessments. The ERP includes predominantly, but not exclusively, staff funded by the USGS Earthquake Hazards Program. A major focus of the ERP is to deliver actionable information to decisionmakers that helps promote the safety, security, and economic well-being of the Nation. The report discusses briefly the ERP’s evolution and scope, its organization structure, describes key products and deliverables, their efforts to engage with external partners, and its strategy and vision in conducting range of engineering and risk research. The research topics outlined in this report, as developed by the ERP, may be used to facilitate project planning activities during the next 10 years and serve as a longer-term planning resource for the USGS Earthquake Hazards Program and Geologic Hazards Science Center.

Circular↗