SEARCH · Geology Reports
Results for “Final Technical Report”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A comparison of electronic particle counting and pipette techniques in routine mud analysis
Electronic particle counting and pipette size-analysis techniques are compared for their relative effectiveness in large-scale routine mud analysis. Optimum laboratory procedures for conducting electronic analyses with a Model TA Coulter Counter are presented. Comparative electronic and pipette analyses conducted on the same samples resulted in equivalent precision for both techniques. Results of electronic analyses consistently showed size distributions significantly coarser than those obtained by pipette analyses. The laboratory efficiency of the relatively rapid electronic technique is far superior to that of the pipette technique, although more extensive precautionary measures are required to maintain a high level of analytical accuracy and precision. The quality of electronic analyses largely depends upon the effectiveness of standardized operational procedures established within the laboratory.
Large springs in the Valley and Ridge Province in Tennessee
Approximately 2,700 miscellaneous discharge measurements for 171 large springs in 28 counties of East Tennessee, predominantly within the Valley and Ridge physiographic province, were analyzed statistically and results tabulated to summarize data useful to the Appalachian Valleys-Piedmont Regional Aquifer System Analysis study. The number of measurements at each spring ranged from 1 to 65. Information from each spring includes station numbers, latitude, longitude, spring name and where data are sufficient, an estimate of the mean discharge and the discharge exceeded by 75%, 50%, and 25% of the miscellaneous measurements. Data are referenced to locations on a 1:1,000 ,000-scale map. The highest mean spring discharge was 32.2 cu ft/sec (14,5000 gallons/min).
A model uncertainty quantification protocol for evaluating the value of observation data
The history-matching approach to parameter estimation with models enables a powerful offshoot analysis of data worth—using the uncertainty of a model forecast as a metric for the worth of data. Adding observation data will either have no impact on forecast uncertainty or will reduce it. Removing existing data will either have no impact on forecast uncertainty or will increase it. The history-matching framework makes it possible to perform this quantitative analysis leveraging the connections among observations, model parameters, and model forecasts. We show this behavior on a specific groundwater flow model of the Mississippi Alluvial Plain and show where the analysis can be informative for considering the potential design of an observation network based on existing or potential observations.
Exploratory water well, St. George Island, Florida
A 1,026-foot well was drilled into the Floridan aquifer on St. George Island in search of a supply of water for residential development in 1971. This is the only well on the island on record to have been drilled below 200 feet for water. The well was abandoned; water flowing from the well was saline. It had a specific conductance of 7,500 micromhos per centimeter at 25° Celsius. The specific conductances of samples taken at drilling depths 217-1,026 feet ranged from 3,140 to 39,600, with the maximum value at 470 ft. A composite geophysical and lithologic log of the well shows spontaneous potential, single-point resistance, gamma-ray, neutron, gamma-gamma, and caliper logs. Well-site notes, a written description of cuttings samples, a graph showing the relation of specific conductance of water samples to the depth of the well at time of sampling, and four chemical analyses of the water are included in the report.
Sedimentary exhalative (sedex) zinc-lead-silver deposit model
This report draws on previous syntheses and basic research studies of sedimentary exhalative (sedex) deposits to arrive at the defining criteria, both descriptive and genetic, for sedex-type deposits. Studies of the tectonic, sedimentary, and fluid evolution of modern and ancient sedimentary basins have also been used to select defining criteria. The focus here is on the geologic characteristics of sedex deposit-hosting basins that contain greater than 10 million metric tons of zinc and lead. The enormous size of sedex deposits strongly suggests that basin-scale geologic processes are involved in their formation. It follows that mass balance constraints of basinal processes can provide a conceptual underpinning for the evaluation of potential ore-forming mechanisms and the identification of geologic indicators for ore potential in specific sedimentary basins. Empirical data and a genetic understanding of the physicochemical, geologic, and mass balance conditions required for each of these elements are used to establish a hierarchy of quantifiable geologic criteria that can be used in U.S. Geological Survey national assessments. In addition, this report also provides a comprehensive evaluation of environmental considerations associated with the mining of sedex deposits.
Monitoring recreation on federally managed lands and waters—Aspects of visitor use
Federally managed public lands and waters receive around 1 billion recreational visits each year. Data on these visitors can aid in guiding policy decisions, managing resources effectively, and communicating the economic contributions of lands and waters. This report explores the methods used by agencies to collect data on aspects of recreational visitor use to Federal lands and waters (apart from visitation numbers, which are the focus of a companion publication). Aspects of recreational visitor use include visitor demographics, recreational activity participation, visitor satisfaction, visitor attitudes and experiences, trip characteristics, and economic contributions. We review practices used to understand aspects of visitor use across seven Federal agencies, revealing similarities such as the use of visitor intercept surveys and coverage of similar topic areas, and differences in how survey programs are operationalized and how specific questions on visitor surveys are worded. We also evaluate emerging technologies, such as geolocated social media and mobile device location data, for their potential to aid in understanding aspects of visitor use. This report concludes with potential opportunities to enhance data collection and coordination, ensuring cost- effective data collection and informed decision making.
Estimating aftershock risk for entry into earthquake-damaged buildings
We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).
Water-resources inventory and assessment at Katahdin Woods and Waters National Monument
The U.S. Geological Survey, in cooperation with the National Park Service, prepared a water-resources inventory and assessment for Katahdin Woods and Waters National Monument (KAWW). This compilation includes published and publicly accessible hydrologic data and resource assessments of streams, rivers, ponds, lakes, wetlands, vernal pools, and groundwater in and near KAWW. It also includes reports and datasets summarizing attributes of KAWW’s hydrologic infrastructure, such as stream crossings, dams, wastewater discharge plants, groundwater monitoring wells, and U.S. Geological Survey streamflow-gaging stations. Descriptions of data and details of current limitations in available datasets are included. Wetland, groundwater, streamflow, and water-quality information are all limited. Hydrography data are available; however, there are limited ground-truth data. Accurate streamlines within KAWW were developed from light detection and ranging (lidar) as a part of this work. Hydrologic infrastructure information is available from multiple sources; however, differences exist among the datasets. Datasets are summarized in appendix 1.
Methodology for compilation of previously published contour data showing the altitude of the base of Dakota Sandstone on the Colorado Plateau, Arizona, Colorado, New Mexico, and Utah
Structure contours and other geologic information from numerous published geologic maps were digitized and compiled into a digital dataset showing the configuration of a single stratigraphic datum, the base of the Dakota Sandstone and its equivalents across the Colorado Plateau. The principal maps compiled in digital form are a series of 1:250,000-scale 1 degree (°) × 2° quadrangle maps published by the U.S. Geological Survey, augmented by other geologic maps published at various map scales. The compiled digital dataset contains geologic map polygons of the Dakota Sandstone and regional stratigraphic equivalents, the location of faults and fold axes, structure contour lines that define the altitude of the base of the unit and bedding orientation data computed from the structure contour lines. This report provides the scientific rationale for compilation of these data and describes the compilation methodology for each of the data elements. This report provides an extended description of the data compilation in a companion U.S. Geological Survey digital data release of spatial data and attributes associated with the contoured surface and associated geologic data layers.
Trace elements in some rocks and slag from the Yemen Arab Republic and their bearing on the iron ore near Sa'dah
Thirty-seven samples of rocks, saprolite, laterite, gossan, and slag were collected in the Yemen Arab Republic during June-July 1975 when field work was conducted to refine an interpretation of the regional geology made from LANDSAT-1 images by M. J. Grolier. These samples we reanalyzed in the laboratories of the U. S. Geological Survey, and the results were interpreted for use in programs of economic development as a guide for the evaluation of mineral resources in the Yemen Arab Republic. The work was undertaken as part of the program of the U. S. Agency for International Development with the cooperation of the Mineral and Petroleum Authority, Ministry of Economy, Yemen Arab Republic.
Method for estimating water use and interbasin transfers of freshwater and wastewater in an urbanized basin
Techniques for management of drainage basins that use water budgets to balance available water resources with actual or anticipated water use require accurate and precise estimates of basin withdrawals, interbasin transfers of freshwater, unaccounted-for use, water use, consumptive use, inflow and infiltration, basin return flow, and interbasin transfers of wastewater. Frequently, interbasin transfers of freshwater and wastewater are not included in basin water budgets because they occur within public water-delivery and wastewater-collection systems. A new 10-step method was developed to improve estimates of inflow and infiltration and interbasin transfers using readily available statewide data. The accuracy and precision of water-use estimates determined by this method are improved through careful application of coefficients for small users and the use of metered values for large users. The method was developed and tested with data for the Ten Mile River Basin in southeastern Massachusetts. This report uses examples from the basin to illustrate each step of the method.
Uranium analysis of single drops of natural waters using the fission-track technique
The fission-track technique has been applied to uranium analysis of natural waters using a single drop of water. Samples may be collected in the field by evaporating a drop of water on a detector, and samples may then be analyzed by returning the detector to the laboratory. A sample collecting kit has been assembled, which facilitates the designed sampling method. Some unique advantages of this technique are picogram sensitivity (10 -12 g) for uranium on single drops of water, maintenance of sample integrity during transport and storage, and the ability to discern whether the uranium is in solution or in the suspended material. Counting the tracks is the most time-consuming part of the analysis, but it can be reduced by using automatic counting systems. The analytical error is generally ± 10 percent over the entire range of concentrations.
Diamond drilling at the Ma'milah Mine, Kingdom of Saudi Arabia
The Ma'millah gold mine is about 90 km southeast of At Ta'if at lat 21°03'N., long 41°18'E., in southwestern Saudi Arabia. The deposit, which was worked extensively by ancient miners, consists of several veins and massive lenses of quartz along a regional fault. The extensive ancient mine workings, large size of some quartz outcrops, and significant gold content of several samples indicated that subsurface exploration was warranted. Accordingly, two holes were drilled into the deposit during the interval December 1972 to February 1973. The drill findings were disappointing; the grade of vein material was found to be too low to be of economic interest and the quartz bodies were found to pinch out both along strike and downdip. The drilling program therefore was terminated. The deposit is not worth further exploration
Summary of results from electromagnetic and galvanic soundings on Kilauea Iki lava lake, Hawaii
The purpose of this report is to summarize various electrical sounding studies made on the Kilauea Iki lava lake and to present some of the preliminary interpretations that resulted from the measurements. The following discussion is not intended as a complete interpretation, but is intended to summarize the major points made in an invited oral presentation at the American Geophysical Union fall meeting held in San Francisco, Calif. on December 6, 1976. This paper was part of a group of papers dealing with various geophysical studies recently made on the Kilauea Iki lava lake. A general plan map of Kilauea Iki lava lake is shown in figure 1. Electromagnetic (EM) loop-loop soundings, D.C. resistivity soundings, and VLF apparent resistivity measurements were made on the lave lake surface. All of these surveys were made to determine the geoelectric structure of the lava lake and to determine parameters of the molten basaltic lens that exist in the partially solidified lava lake.
A crosswalk of the 2015 World Terrestrial Ecosystems to the International Union for the Conservation of Nature Global Ecosystem Typology Framework
To support ecosystem mapping and accounting applications, we aligned the 2015 U.S. Geological Survey/Esri/The Nature Conservancy-World Terrestrial Ecosystems (WTEs) with the International Union for Conservation of Nature Global Ecosystem Typology (GET) framework. This process, known as “crosswalking,” enabled the development of a global map of GET level 3 Ecosystem Functional Groups (EFGs) at a 250-meter spatial resolution. Crosswalking involved manually assigning 1,781 biogeographically stratified WTEs to their most probable EFG based on similarities in climate, terrain, vegetation, and geographic distribution. We compared attributes of the WTE dataset with summary characteristics of the EFGs. The resulting crosswalked global map of International Union for Conservation of Nature GET ecosystems is intended to be useful for standardizing ecosystem classification and reporting under frameworks such as the Kunming-Montreal Global Biodiversity Framework and the United Nations System of Environmental-Economic Accounting. We discuss key challenges in reconciling non-identical classifications, such as many-to-one relationships and variation in data quality.
Earth Mapping Resources Initiative protocols—Sampling hard-rock mine waste and perpetual mine water sources
Supporting the overarching goal to evaluate critical minerals nationwide, the mine waste characterization effort in the U.S. Geological Survey (USGS) Earth Mapping Resources Initiative has created a series of protocols to standardize sampling carried out under this effort by the participating State geological surveys and their cooperators. The protocols are based on published, reviewed methods that can be deployed in the field. The protocols include (1) collecting and processing composite samples of mine and mill waste, including tailings, waste rock, gangue, heap leach piles, ore stockpiles, slag, or other mineralized and processed materials and (2) collecting and preserving water samples from perpetual or long-term mine water sources. The protocols also specify information to document on field sheets and detail the collection of geospatial data. The analytical methods used by the USGS and USGS contract laboratories are described in this report, including the data delivery pathway for USGS-derived data.