Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Soil Dynamics and Earthquake Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,697 records · Page 11Linked to original sources
USGS2026

Spatio-temporal modeling for assessing geoenergy resources: A workflow applied to gas in place variation in coal beds

The ability to estimate spatio-temporal changes in hydrocarbon reservoir properties and energy resources within pore volumes is essential for optimizing production, reservoir management, geologic energy storage, and safety in underground mining operations. In coal seams, predicting remaining methane gas-in-place (GIP) is critical for quantifying producible gas and improving mine safety and productivity through effective ventilation planning. Although such changes are commonly evaluated using physics-based numerical simulation models, these approaches often require extensive data, calibration effort, and time. This study presents a spatio-temporal geostatistical modeling approach that bridges the gap between purely spatial models and full numerical simulations. The method is applied to a case study of coal seam degasification in the Mary Lee coal group, Black Warrior Basin, Alabama, USA, to estimate GIP evolution over time within a selected mining district. The analysis uses published data from prior natural gas production history-matching of degasification using vertical wells. Empirical spatial and temporal statistics were calculated for reservoir pressure and water saturation, and spatio-temporal variogram models were fitted to experimental variograms. These models provided the structural basis for spatio-temporal kriging, integrated with spatial estimates of time-invariant parameters (porosity, density, and thickness) to estimate GIP. This approach enabled estimation of GIP changes over time, including periods without data. Boxplots of GIP estimates indicated systematic depletion and decreasing spatial variability, reflecting the impacts of degasification. Comparison with cumulative gas production from empirical well records showed approximately 85% agreement based on a relative similarity metric. Spatio-temporal GIP estimates were also used to estimate methane emissions to longwall ventilation systems and compared with reported emissions from the U.S. EPA Greenhouse Gas Reporting Program, showing similar distributions (≈80%) given data limitations. Overall, this integrated modeling approach provides time-dependent GIP estimates with broader implications for resource assessment applications.

Alabama↗
USGS2025

The impact of burial diagenesis on soil-formed minerals in paleosols using stable isotopes of phyllosilicates and carbonate clumped isotopes

To understand the effects of burial diagenesis on the stable isotope geochemistry of soil-formed clay and carbonate minerals in paleosols, samples were collected from seven cores, spanning middle- to upper-Pennsylvanian strata of the Illinois Basin, with varied maximum burial depths of 1–3 km. Mixed-layer illite-smectite and kaolinite mixtures give δ 2 H and δ 18 O values of −83 ‰ to −36 ‰ and 11.9 ‰ to 21.1 ‰ (VSMOW), respectively. After carbonates were screened petrographically for diagenetic textures using transmitted light and cathodoluminescence, measured clumped isotope Δ 47 values range from 0.504 to 0.563 ‰ (I-CDES). Resulting mineral formation temperatures for phyllosilicate mineral mixtures are 28 to 66 °C (mean = 47 °C), whereas T(Δ 47 ) estimates for calcites are 36 to 61 °C (mean = 45 °C). Calculated δ 18 O water values from which phyllosilicate minerals and calcites precipitated under isotopic equilibrium ranges from −7.1 to −1.2 ‰ and − 1.4 to +4.9 ‰, respectively. Closed and open-system phyllosilicate-fluid exchange modeling indicates that phyllosilicate alteration occurred in the presence of a low temperature brine or meteoric water and is interpreted to occur in a layer-by-layer illitization transformation. Due to the lack of diagenetic textures and positively correlated T(Δ 47 ) and δ 18 O water , calcites are interpreted to have undergone solid-state bond reordering. Despite low to moderate temperatures (<125 °C) and varying depths of shallow burial (1–3 km), solid-state transformation of phyllosilicates and calcites indicates paleosols had prolonged exposure to burial conditions which has implications for the use of paleosol minerals for paleoenvironmental reconstructions.

Illinois, Indiana, Kentucky↗
USGS2025

Estimation of dynamic geologic CO2 storage resources in the Illinois Basin, including effects of brine extraction, anisotropy, and hydrogeologic heterogeneity

Since the vast majority of carbon dioxide (CO 2 ) storage resources in the United States are in deep saline aquifers, optimizing the use of these saline storage resources could be crucial for efficient development of geologic CO 2 storage (GCS) resources and basin- or larger-scale deployment of GCS in the country. Maximum CO 2 injection rates can be enhanced by extracting brine from the CO 2 storage unit. However, disposal of the extracted brine is both a technological and economic challenge. The lowest-cost option would likely be reinjection of the extracted brine into another formation above or below the CO 2 storage unit. Therefore, it is important to estimate brine injectivity as it will constrain the potential to increase CO 2 injectivity at an injection site that has access to multiple geologic storage units where either CO 2 or brine can be injected. Using a simulation-optimization framework, coupled with a non-isothermal, multiphase CO 2 -water-salt equation-of-state module, we developed a computationally efficient method for evaluating optimization of simultaneous CO 2 injection, brine extraction, and brine (re)injection at hypothetical injection sites deployed across a geologic basin. The Illinois basin is ideal for testing our methodology because it contains multiple geologic storage units with seals in between them to isolate injection of CO 2 in one unit from interfering with the injection of either brine or CO 2 in another unit above or below it. In addition, we investigated the relative effects of variation in key geologic parameters as well as two reservoir structures (hydrogeologic heterogeneity/anisotropy and homogeneity/isotropy) on CO 2 injectivities and enhancement of CO 2 injectivity through extracting brine. Results suggest that permeability, depth, and especially thickness of the storage unit could be the most influential parameters determining CO 2 injectivity. They also suggest that only injecting CO 2 into the storage unit with the greatest injectivity, enhancing that unit’s injectivity by extracting brine, and disposing of the produced brine in other suitable units could maximize total CO 2 injectivity in limited regions of the basin. At the majority of simulated injection sites, however, we found that injecting CO 2 into all of the accessible and suitable storage units was more likely to maximize the CO 2 storage resource.

Illinois, Kentucky, Indiana↗
USGS2026

Inference of pattern-based geological CO2 sequestration and oil recovery potential in a commingled main pay and residual oil zone CO2-EOR flood

Several detailed studies have shown that residual oil zones (ROZs) can present significant resources for additional hydrocarbon recovery as well as subsurface carbon dioxide (CO 2 ) sequestration via enhanced oil recovery by injecting CO 2 (CO 2 -EOR). Field development strategies included new wells drilled dedicated to main pay zones (MPZ) and ROZs, or existing wells in MPZs deepened to ROZs for commingled injection-production using different well patterns. The latter presented a challenge when discerning the injection and production from each of the zones, and for subsequent quantification of CO 2 sequestration and EOR potential from different patterns and from the field. In this paper, an innovative method for analyzing commingled injections and productions from MPZs and ROZs, with application to pattern-based data from four staggered line drive patterns in Wasson Field's Denver Unit, Texas, USA, was developed. Decline curve and ratio-trend methods were used as means of history-matching and forecasting. Cumulative production-time and cumulative production-rate data for oil, gas, and water, as well as water-oil ratio (WOR) and gas-oil ratio (GOR), were analyzed along with injection data for time intervals covering major injection events in MPZ, or MPZ and ROZ combined. A combined analysis enabled inference of allocation of fluids into different zones during WAG (water alternating gas) injection and thereby estimation of CO 2 storage, utilization, and retention in different zones as a function of total injection. Results show that ROZs generally present higher CO 2 sequestration potential compared to MPZs, and a comparable incremental oil recovery factor of ∼20%, on average. Results based on ratio analysis further show that while the WOR trend of the pattern production is mostly dominated and controlled by ROZ, GOR is controlled by both intervals. Although the method relying on decline curves and the approach used in zonal fluid allocations are subject to their limitations, this study presents a practical and innovative well-pattern-based method to infer and forecast CO 2 sequestration and oil recovery quantities and fluid ratios from MPZs and ROZs in commingled operations and highlight the added potential offered by ROZs.

Texas↗
USGS2024

U.S. Geological Survey Earthquake Hazards Program decadal science strategy, 2024–33

Executive Summary Earthquakes represent one of our Nation’s most significant and costly natural hazards, with estimated annual loses from earthquakes close to $15 billion in 2023. Over the past two centuries, 37 U.S. States have experienced an earthquake exceeding a magnitude of 5, and 50 percent of States have a significant potential for future damaging shaking; these statistics speak to the need for nationwide interest and investment in earthquake hazard characterization and risk reduction. Authorized under the Earthquake Hazards Reduction Authorization Act, the U.S. Geological Survey (USGS) Earthquake Hazards Program (EHP) provides the scientific information, situational awareness, and knowledge necessary to reduce deaths, injuries, and economic losses from earthquakes and earthquake-induced tsunamis, landslides, and soil liquefaction. The EHP supports activities in three focused topical areas: (1) earthquake monitoring, (2) hazard assessment, and (3) applied research, using the results of each—and the coordination among them—to further support risk translation and communication in regions at risk nationwide. For earthquake monitoring, the Advanced National Seismic System (ANSS), a cooperative effort of USGS networks, university partner regional seismic networks, and real-time geodetic networks, collects and analyzes data on earthquakes; issues timely, reliable notifications of their occurrence and impacts; and provides data for earthquake research, hazard, and risk assessment as a foundation for building an earthquake-resilient Nation. The USGS-operated ShakeAlert Earthquake Early Warning system is a recent addition to EHP’s ANSS infrastructure. In the realm of earthquake hazard assessment, the EHP contributes to earthquake risk mitigation strategies by developing the National Seismic Hazard Model and maps, and other related products, that describe the likelihood and potential effects of earthquakes nationwide, especially in the urban areas of highest risk. The EHP also conducts research on the causes, characteristics, and effects of earthquakes and prioritizes work that directly increases the accuracy and precision of earthquake hazards assessments, earthquake forecasts, and earthquake monitoring and situational-awareness products and that supports the Nation’s earthquake mitigation practices. Bridging the EHP’s efforts across research, hazard assessments, and earthquake monitoring is a broad and comprehensive collection of earthquake information products, including the National Seismic Hazard Model, ShakeAlert, and other products describing impact, such as ShakeMap and PAGER (Prompt Assessment of Global Earthquakes for Response), which have been developed and integrated into EHP’s real-time monitoring systems. EHP funds external partners to carry out many important collaborative activities through an active external grants program—one of the largest in the USGS—and through cooperative agreements with other partners such as the university-operated regional seismic networks, funded as part of the ANSS. To continue its support of earthquake hazard characterization and risk reduction, the EHP aims to strengthen its foundational products and practices while positioning itself to respond to the evolving needs of the Nation and follow best practices of the scientific community. This document describes a strategy for the program to ensure it can meet these demands. The foundational priorities outlined in this strategy represent those activities that remain critical to the core functionality of the program and those that can be supported under current fiscal year 2024-level appropriations. Priorities described as aspirational are important for future growth, and to maintain the program’s position as a leading global resource in earthquake science, but would require increases in appropriated funding to be fully realized. Across the program’s portfolio of activities, several major themes have been identified as the most critical activities to advance EHP science over the coming decade. Together, these activities provide the framework necessary to integrate critical hazard characterization and risk reduction activities across the program. They provide the structure for research to advance the understanding of where, when, and why earthquakes occur and how we can use improved knowledge to drive short-term and actionable forecasts of seismic activity. They expand the usefulness of critical earthquake products and advance the sophistication of those products to keep pace with the rapidly evolving needs of an ever-expanding user base while maintaining the position of the USGS as a global leader in earthquake science. Focus on system-level science. Establish an automated earthquake-processing pipeline. Enhance the accuracy and reliability of the ShakeAlert Earthquake Early Warning system and plan for extension to other regions. Implement time-dependent earthquake forecasting. Develop physically realistic models. Expand computational capacity. This science strategy is organized into three primary sections. The first section provides an overview of the EHP and its budget, governance, and program council. Readers familiar with the program may wish to focus on the second section, which describes the core of the science strategy, including priorities across each of the EHP’s major program activities in monitoring, hazard assessment, and targeted research. The third section outlines science priorities that cut across program activities, including those involving collaborations external to the EHP.

American Samoa, Guam, Northern Marianas Islands, U↗
USGS2026

Measuring stress In high pressure deformation experiments with high speed fiber-optics

High‐pressure, high‐temperature rock deformation experiments are essential for understanding deep Earth processes, but accurately measuring stress is challenging due to the inaccuracy introduced by seal friction within the apparatus and large inertia, which affects earthquake process measurements made far from the experimental fault. To overcome these limitations, we developed and implemented a simple, compact fiber‐optic sensor based on an External Cavity Fabry–Perot Interferometer for in situ load measurement on a piston inside the pressure vessel of a Griggs‐type high‐pressure apparatus. The sensor can be used at sample temperatures up to 800°C for both slow creep and fast rupture testing with bandwidth capability from DC to 6 MHz. Two important experimental results are described: (1) the first direct measurements of seal friction in this apparatus type; these measurements record seal friction approximately one‐tenth of the confining pressure under both low (150 MPa) and high (1 GPa) pressure conditions; and (2) high‐temporal resolution capture of dynamic stress drops during stick‐slip faulting events at high‐confining pressure, revealing near‐fault wave propagation details, high‐frequency oscillations, and implying high‐transient slip rates (6–12 m/s) previously inaccessible with external sensors.

The Seismic Record↗
USGS2025

Do Graviquakes exist?

The “Graviquake” model, proposed in 2015 as an alternative to the elastic dislocation model, posits that normal faults are passive features dominated by coseismic gravitational collapse into a dilated crustal wedge, and that normal faulting is fundamentally distinct from strike‐slip and reverse faulting. Developed using finite‐element modeling before the 2016 central Apennines earthquake sequence, the model was revamped based on interpreted Differential Interferometric Synthetic Aperture Radar data from these events and used as evidence for a gravitational collapse episode. However, this interpretation relies on miscalculated elevation changes and is not corroborated by independent geophysical and seismological observations. Our analysis exposes fundamental flaws in the Graviquake model. By assuming that faults are passive players, it underrepresents the dynamic role of strain accumulation and release in rocks adjacent to faults. The hypothesized rapid expulsion of overpressurized fluids appears inconsistent with observed diffusion rates and lacks supporting seismological evidence. Part of the uplifted–subsided volume imbalance is likely an artifact arising from data processing, and in part is a transient effect due to the delayed response of the lower crust. Moment tensor analyses detect no isotropic components indicative of gravitational collapse, and observed ground motion and stress‐drop levels remain fully consistent with elastic dislocation theory. In addition, finite‐element modeling of normal faulting replicates observed surface deformation without invoking a collapsing wedge. The Graviquake model proposes a representation of normal‐faulting mechanics that differs significantly from established models and observations. Gravity does play a role in normal faulting, but the elastic dislocation theory remains the definitive framework of fault mechanics. Reinterpreting the 2016 earthquakes as a cascade of gravitational episodes, based on incorrect data processing and modeling, fails to substantiate the Graviquake hypothesis. Persistence in advocating this model could mislead seismic hazard assessment and undermine our understanding of normal faulting.

Bulletin of the Seismological Society of America↗
USGS2026

Rapid seismic and infrasound assessment of large landslides: A case study from Denali National Park and Preserve (Alaska)

Large, rapid landslides are a global hazard that can occur in remote, mountainous areas. Eyewitness reports of landslides and satellite imagery can often be limited or delayed, particularly during inclement weather. However, landslide-generated seismic and infrasound (low-frequency atmospheric sound) waves can be remotely detected in near real-time. This information can significantly expedite characterization and possible landslide response activities. Here, we highlight these capabilities using a > 4 million m³ ice–rock avalanche in Denali National Park and Preserve (Alaska). This event was detected via a landslide-specific seismic location and volume estimation algorithm deployed in Alaska, and — notably — by standard earthquake monitoring systems. Following rapid detection of this event, we combined its seismic and infrasound dataset with optical, synthetic aperture radar, and oblique aerial imagery, multitemporal digital elevation models, and a numerical flow model to reconstruct its failure timeline and dynamics. We apply array processing to infrasound signals traveling > 250 km and find that two precursory events occurred minutes prior to the main failure. We use long-period seismic signals to infer the force exerted by the landslide on the Earth and constrain the rheological parameters of our numerical flow simulation with this result and deposit morphology. The main failure produced a steeply-dipping impulsive initial downward force and reached speeds exceeding 60 m/s. This impulsive force generated relatively strong seismic body waves, which contributed to the earthquake system detection. This large, remote Alaska landslide underscores the key value of seismic and infrasound analysis for rapid landslide assessment and motivates efforts to further operationalize these approaches.

Alaska↗
USGS2025

Do bighorn sheep use desert tortoise burrow spoil piles as mineral licks in southern California?

In a previous study, bighorn sheep ( Ovis canadensis ) were periodically photographed by trail cameras when they visited desert tortoise ( Gopherus agassizii ) burrows in the San Bernardino Mountains near Palm Springs, California, USA. The authors suggested that bighorn sheep may utilize the excavated spoil material from burrows as a mineral lick. To test that supposition, we collected soil samples from the spoil piles and undisturbed surface soil up to 1 m away at two desert tortoise study sites with bighorn sheep at the aforementioned site and another nearby site. We hypothesized that sodium concentrations would be greater in spoil than in nearby surface soil samples. Common major cations were quantified in soil samples using inductively coupled plasma-mass spectrometry following microwave-assisted digestion to solubilize the fraction of elements that could become biologically or environmentally available. Mean sodium concentrations were greater in burrow spoil samples than in undisturbed soil samples at both sites, likely due to aqueous leaching of sodium from surface to subsurface soil horizons. Although we did not collect evidence of geophagy by bighorn sheep, the behavior is well known. However, trail camera photographs of bighorn sheep with their head next to the entrance of tortoise burrows suggests that they may periodically utilize sodium and other elements brought to the surface by desert tortoises that are otherwise unavailable to bighorn sheep on the surface.

California↗
USGS2025

Aftershocks in stress shadows are inconsistent with modeled static Coulomb stress changes

Aftershock triggering is commonly attributed to increases in static Coulomb stress. In some areas, termed "stress shadows", a decrease in Coulomb stress is predicted to suppress earthquake occurrence. However, aftershocks are often observed in the modeled stress shadows. We examine several hypotheses that attempt to reconcile these shadow aftershocks with the static Coulomb stress change model: (1) they appear to be in shadows because of inaccuracy in the stress change calculations, (2) they occur on faults of unusual orientation which actually experienced increased Coulomb stress, (3) they occur on faults with different frictional properties, not modeled well by Coulomb stress, and (4) they are secondary aftershocks triggered by prior aftershocks or afterslip. When tested on the 2016 Mw7.0 Kumamoto, Japan, and 2019 Mw7.1 Ridgecrest, California, aftershock sequences, none of these hypotheses can explain the majority of the shadow aftershocks, and taken together these hypotheses can explain only about half of these aftershocks. This implies that Coulomb stress modeling that lacks small-scale fault zone heterogeneity might be inadequate to fully capture the true static stress changes and/or that other physical triggering models are needed, for example transient processes such as delayed triggering by dynamic stress changes from the passing seismic waves.

California↗
USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗
USGS2026

Decadal trends in the quality of groundwater used for public drinking-water supply in California, 2004–2023, California groundwater ambient monitoring and assessment program, priority basin project

This study provides a comprehensive assessment of decadal changes in the quality of groundwater used for public drinking-water supply at 444 monitoring sites across California during 2004–2023. We assessed decadal step trends in groundwater quality for 145 water-quality constituents and geochemical indicators statewide and across geographic and land-use based network groups. We evaluated the statistical significance of directional changes (predominant increase or decrease of constituent concentrations) and the magnitude of those changes across all network groups. Uranium showed the most widespread directional and high-magnitude increases of all constituents with regulatory benchmarks statewide, particularly in the agriculture-dominated Central Valley as well as urban- and desert-dominated regions of Southern California. Fluoride and perchlorate showed the most widespread directional and high-magnitude decreases of all constituents with regulatory benchmarks statewide, which were also most pronounced in Southern California. Although arsenic and nitrate did not often register significant directional changes across network groups, they showed widespread, high-magnitude changes in both directions (increase and decrease) at levels often exceeding 10 percent of respective regulatory benchmarks statewide. Triazine herbicides (atrazine and simazine) and the gasoline oxygenate methyl tert-butyl ether (MTBE) showed significant directional decreases statewide, but not at levels considered to be of high magnitude compared to respective regulatory benchmarks. We observed significant directional and high-magnitude increases of total dissolved solids (TDS) statewide, which were most pronounced in agricultural areas. Analysis of explanatory geochemical indicators indicated that prevalent statewide increases of alkalinity and calcium were the predominant components of the observed statewide increases in TDS by mass. Widespread increases in groundwater alkalinity and calcium across agricultural and urban areas may be related, in part, to warm-season irrigation and other anthropogenic factors that have shifted soil weathering dynamics over the long term. Increasing alkalinity concentrations were related to increasing uranium concentrations, particularly in areas with aquifer materials derived from granitic rocks. Conversely, increasing calcium concentrations were related to decreasing fluoride concentrations, particularly in areas where fluoride occurred naturally at elevated concentrations. Decrease of perchlorate, triazine herbicides, and MTBE are likely related to decreased anthropogenic source inputs over time and natural attenuation in aquifers.

EarthArXiv↗
USGS2025

Analyzing multi-year nitrate concentration evolution in Alabama aquatic systems using a machine learning model

Rising nitrate contamination in water systems poses significant risks to public health and ecosystem stability, necessitating advanced modeling to understand nitrate dynamics more accurately. This study applies the long short-term memory (LSTM) modeling to investigate the hydrologic and environmental factors influencing nitrate concentration dynamics in rivers and aquifers across the state of Alabama in the southeast of the United States. By integrating dynamic data such as streamflow and groundwater levels with static catchment attributes, the machine learning model identifies primary drivers of nitrate fluctuations, offering detailed insights into the complex interactions affecting multi-year nitrate concentrations in natural aquatic systems. In addition, a novel LSTM-based approach utilizes synthetic surface water nitrate data to predict groundwater nitrate levels, helping to address monitoring gaps in aquifers connected to these rivers. This method reveals potential correlations between surface water and groundwater nitrate dynamics, which is particularly meaningful given the lack of water quality observations in many aquifers. Field applications further show that, while the LSTM model effectively captures seasonal trends, limitations in representing extreme nitrate events suggest areas for further refinement. These findings contribute to data-driven water quality management, enhancing understanding of nitrate behavior in interconnected water systems.

Alabama↗
USGS2024

Methods to evaluate and improve the modeling of rupture directivity in assessment of seismic hazard

In recent years, there have been several advancements related to the modelling of near-source effects of earthquake rupture on strong ground shaking, leading to an improved characterization of ground motions and resulting seismic hazard. Some of these modifications have stemmed from physics-based numerical modelling of the earthquake rupture process, using physics-based dynamic rupture simulations. These contributions have led to a better understanding of how fault rupture characteristics, geometry, and the style of faulting can interact with the hypocenter-dependence on the path from source to site that may ultimately guide the development of seismic directivity models. Moving forward, the application of modern techniques can be used to incorporate these source characteristics and near-fault ground motion behavior that contribute to the azimuthally varying effects that result in rupture directivity. One example is the application of machine learning methods to support more automated integration of new predictor variables in model development and open more evaluation opportunities to access residuals. Here, we utilize several techniques to take advantage of the plethora of synthetic data and its ability to supplement preexisting trends observed in data. We showcase two examples of how models can be either developed, expanded upon, or constrained using artificial neural network model (ANNs). We evaluate the performance of the ANN with existing methods, comparing misfit, potential limitations, and ability to continue to improve upon these methods in the future. One approach uses a set of simulations with corresponding synthetic ground motions from the Southern California Earthquake Center (SCEC) CyberShake study to develop a ground motion model adapted to incorporate seismic directivity information using an ANN. This large database (TBs) enables us to train the model to capture magnitude, period, and distance variations and how these parameters relate to amplification from hypocenters located along finite-faults. In some cases, there is reduced misfit from better representing source features that aren’t included in base ground motion models that neglect hypocenter location (e.g. azimuthal variation, source-to-site terms). Another ANN method uses a shallow-layered neural network model to better fit a hypocenter-independent model. This method adjusts the median and aleatory variability to account for the averaged impact of various hypocenter distributions to fit the underlying directivity adjustment model. This method serves as a template to apply to other directivity models, improving computational efficiency and more readily enabling integration in hazard codes.

California↗
USGS2025

Meet the people where they are: Assessing user needs for aftershock forecast products in El Salvador, Mexico and the United States

Aftershock forecasts can help communities reduce their seismic risk by conveying how many aftershocks can be expected following a large earthquake, and how the expected number of aftershocks and their corresponding ground shaking evolves over time and space. Prior work finds that graphical forecast products may communicate such information better than only text or numbers. To identify which visual products can serve multiple user groups, we held workshops with members of several professions, including emergency managers, engineers, critical infrastructure operators, public health specialists, science communicators, and more. We conducted these workshops in El Salvador, Mexico and the United States to understand which forecast products may be effective across different countries. In these workshops, users performed small-group activities to elicit the types of aftershock forecast information that would support decisions in their respective roles and how this information would optimally be displayed. Maps of shaking hazards were frequently requested across all professions and countries, even for dissimilar forecast uses. The design of these maps, and other product needs, were differentiated by profession, country and other factors. Other forecast products, including those showing forecasts about the magnitudes and time periods of future aftershocks, also served a variety of users, but for different types of decisions. We found a greater variation in user needs by profession than by country, and that user needs also vary with time, communication channel and other contextual factors. We discuss practical implications for user-centered visual communication of operational aftershock forecasts.

International Journal for Disaster Risk Reduction↗
USGS2026

Decadal trends in the quality of groundwater used for public drinking-water supply in California, 2004–23, California Groundwater Ambient Monitoring and Assessment Program, Priority Basin Project

This study provides a comprehensive assessment of decadal changes in the quality of groundwater used for public drinking-water supply at 444 monitoring sites across California during 2004–23. We assessed decadal step trends in groundwater quality for 145 water-quality constituents and geochemical indicators statewide and across geographic and land-use based network groups. We evaluated the statistical significance of directional changes (predominant increase or decrease of constituent concentrations) and the magnitude of those changes across all network groups. Uranium showed the most widespread directional and high-magnitude increases of all constituents with regulatory benchmarks statewide, particularly in the agriculture-dominated Central Valley as well as urban-and desert-dominated regions of Southern California. Fluoride and perchlorate showed the most widespread directional and high-magnitude decreases of all constituents with regulatory benchmarks statewide, which were also most pronounced in Southern California. Although arsenic and nitrate did not often register significant directional changes across network groups, they showed widespread, high-magnitude changes in both directions (increase and decrease) at levels often exceeding 10 percent of respective regulatory benchmarks statewide. Triazine herbicides (atrazine and simazine) and the gasoline oxygenate methyl tert -butyl ether showed significant directional decreases statewide, but not at levels considered to be of high magnitude compared to respective regulatory benchmarks. We observed significant directional and high-magnitude increases of total dissolved solids statewide, which were most pronounced in agricultural areas. Analysis of explanatory geochemical indicators indicated that prevalent statewide increases of alkalinity and calcium were the predominant components of the observed statewide increases in total dissolved solids by mass. Widespread increases in groundwater alkalinity and calcium across agricultural and urban areas may be related, in part, to warm-season irrigation and other anthropogenic factors that have shifted soil weathering dynamics over the long term. Increasing alkalinity concentrations were related to increasing uranium concentrations, particularly in areas with aquifer materials derived from granitic rocks. Conversely, increasing calcium concentrations were related to decreasing fluoride concentrations, particularly in areas where fluoride occurred naturally at elevated concentrations. Decrease of perchlorate, triazine herbicides, and methyl tert -butyl ether are likely related to decreased anthropogenic source inputs over time and natural attenuation in aquifers.

California↗
USGS2026

Deep critical zone controls on shallow landslides

The deep critical zone (CZ) has long been recognized for its importance in influencing shallow landslides but was not considered feasible to include in slope stability models at the watershed scale. In this study, we demonstrate that simple approximations of the CZ in a fully coupled hydrologic and soil slope stability model can effectively capture the location, timing, and likely size of shallow landslides. To achieve this, we use coupled, process-based models that incorporate the effects of 1) deep CZ structures, 2) three-dimensional transient hydrology, and 3) multidimensional slope stability, calibrated with data from an intensively monitored field site. Our results show that the hydrologically active deep CZ guides groundwater flow, influencing where it drains from or exfiltrates to the soil mantle, producing distinct patterns of soil saturation and seepage forces at the soil-bedrock boundary. Deep conductive weathered critical zone drains the soil mantle, reducing the likelihood of destabilizing pore pressures, while the downslope thinning of the CZ forces groundwater to the surface. This creates localized instability and a tendency for similar-sized landslides across the landscape. In contrast, the absence of conductive weathered bedrock results in more widespread destabilizing pore pressures, leading to larger landslides and the likelihood of landslides earlier in a storm than in landscapes underlain by a deep CZ. Our findings suggest that first-order variations of deep CZ can provide physical explanations for variations observed in the susceptibility, magnitude, and timing of shallow landslides, and that CZ structure may be inferred from patterns and timing of landsliding.

Proceedings of the National Academy of Sciences↗
USGS2025

Climate-driven sulfate export in alpine watersheds may stimulate methylmercury production

Climate change is increasing sulfate export and changing wetland extent in mountain regions. These changes may increase microbially mediated production of the neurotoxic substance methylmercury due to enhanced sulfate metabolism in mountain environments. Here, we assess methylmercury concentrations and formation rates across high-elevation wetlands in the Colorado Rocky Mountains. We also investigate sulfate controls on methylmercury production within subalpine peatlands by amending soils with sulfate to mimic increased stream export of sulfate from the alpine zone and measuring methylmercury formation rates for different sulfate treatments. We found that subalpine peatlands have statistically significant higher methylmercury concentrations and formation rates compared to alpine, mineral-soil wetlands. Methylmercury production in subalpine peatlands also increased significantly ( p < 0.05) following sulfate additions; the highest rates occurred in sediments with intermediate extractable sulfate concentrations (∼0.60–1.4 mg sulfate g −1 dry soil). Our study is the first to identify soil sulfate-related thresholds for methylmercury production and sulfate-limitation of methylmercury production in subalpine peatlands. These findings highlight important linkages between climate-driven mineral weathering and mercury cycling in mountain regions globally.

Colorado↗