Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Map Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources

Potentiometric-surface map of water in the Eagle Sandstone and equivalent units in the northern Great Plains area of Montana

The potentiometric surface of water in the Upper Cretaceous Eagle Sandstone and equivalent units (Virgelle Sandstone and Telegraph Creek Formation) is shown on a base map at a scale of 1:1,000,000. The map is one of a series of maps produced as part of a regional study of aquifers of Cenozoic and Mesozoic age in the northern Great plains of Montana. The contour interval is 200 feet. The map shows that the directions of regional ground-water movement is from west to east except in the extreme northwestern corner where the movement is from east to west. Water is discharged from the Eagle Sandstone to the Missouri River south of the Bearpaw Mountains. In the area north of the Bearpaw Mountains, depressurization from gas production may account for the decline in the potentiometric surface. The average discharge from 115 wells is about 23 gallons per minute and the specific capacity of 85 wells averages 1.4 gallons per minute per foot of drawdown.

Montana↗

Geophysical and geologic maps of Mountain Pass and vicinity, California and Nevada

U.S. Geological Survey Scientific Investigations Map 3412 is a series of products that consists of geophysical and geologic maps of Mountain Pass and vicinity, California. Maps A and B (red outline in above map image) are gravity and aeromagnetic maps, respectively. The map series was begun as part of an effort to study regional crustal structures as an aid to understanding the geologic framework and mineral resources of the southeast Mojave Desert. Mountain Pass resides within the southeast Mojave Desert, and it is host to a one of the world’s largest rare earth element carbonatite deposits. The deposit is found along a north-northwest- trending, fault-bounded block that extends along the eastern parts of the Clark Mountain Range, Mescal Range, and Ivanpah Mountains. This Paleoproterozoic block is composed of a 1.7-Ga metamorphic complex of gneiss and schist that underwent widespread metamorphism and associated plutonism during the Ivanpah orogeny. The Paleoproterozoic rocks were intruded by a Mesoproterozoic (1.4 Ga) ultrapotassic alkaline intrusive suite and carbonatite body. The intrusive rocks include, from oldest to youngest, shonkinite, mesosyenite, syenite, quartz syenite, potassic granite, carbonatite, carbonatite dikes, and late shonkinite dikes. Each map in the series provides the basis for geophysical and geologic interpretations of the Mountain Pass carbonatite terrane. Combined, they provide a comprehensive framework of the regional subsurface geologic structure of the area. Together, they form the first publicly available series of geophysical and geologic maps of this part of the southeast Mojave Desert.

California, Nevada↗

Maps showing geology, oil and gas fields, and geologic provinces of the Asia Pacific region

This digitally compiled maps include geology, geologic provinces, and oil and gas fields of the Asia Pacific Region. The map is part of a worldwide series of maps on CD-ROM released by the U.S. Geological Survey's World Energy Project. The goal of the project is to assess the undiscovered, technically recoverable oil and gas resources of the world and report these results by the year 2000. For data management purposes, the world was divided into eight energy regions corresponding approximately to the economic regions of the world as defined by the U.S. Department of State. The Asia Pacific Region (Region 3) includes Australia, Brunei, Cambodia, The People's Republic of China, Fiji, Indonesia, Japan, North and South Korea, Laos, Malaysia, Mongolia, New Caledonia, New Zealand, Papua New Guinea, Philippines, Thailand, Vanuatu, and Vietnam.

Open-File Report↗

Map showing geology, oil and gas fields, and geologic provinces of Europe including Turkey

Introduction This digitally compiled map includes geology, geologic provinces, and oil and gas fields of Europe including Turkey. The maps are part of a worldwide series of maps on CD-ROM released by the U.S. Geological Survey's World Energy Project. The goal of the project is to assess the undiscovered, technically recoverable oil and gas resources of the world. For data management purposes the world was divided into eight energy regions corresponding approximately to the economic regions of of the world as defined by the U.S. Department of State. Europe (Region 4) includes Albania, Andorra, Austria, Belgium, Bosnia and Herzegovina, Bulgaria, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, The Former Yugoslav Republic of Macedonia, Malta, Monaco, Netherlands, Norway, Poland, Portugal, Romania, San Marino, Serbia and Montenegro, Slovakia, Slovenia, Spain, Sweden, Switzerland, United Kingdom and Vatican. The depicted portion of Region 2 includes Turkey.

Open-File Report↗

Potentiometric map of the Paleozoic aquifer in northeastern Mississippi, November and December 1982

This potentiometric map is the second map of the Gordo aquifer in a series of maps prepared by the U.S. Geological Survey in cooperation with the Mississippi Department of Natural Resources , Bureau of Land and Water Resources, delineating the potentiometric surfaces of the major aquifers in Mississippi. The potentiometric surface of the Gordo aquifer slopes generally to the west away from the outcrop area and it is marked by large ground-water cones of depression in the Tupelo and Columbus areas. Water levels in or near the outcrop of the Gordo aquifer show little long-term change. Heavy withdrawals in the downdip area have caused water-level declines of about 2 feet per year since 1978 in much of the confined part of the aquifer. The water-level decline in the Tupelo area has averaged about 5 feet per year since 1966; however, there has been water-level rise at the center of the cone of depression as a result of a change in the distribution of pumping. (USGS)

Water-Resources Investigations Report↗

Controlled photomosaic map of Callisto JC 15M CMN

This sheet is one in a series of maps of the Galilean satellites of Jupiter at a nominal scale of 1:15,000,000. This series is based on data from the Galileo Orbiter Solid-State Imaging (SSI) camera and the cameras of the Voyager 1 and 2 spacecraft. Mercator and Polar Stereographic projections used for this map of Callisto are based on a sphere having a radius of 2,409.3 km. The scale is 1:8,388,000 at ±56° latitude for both projections. Longitude increases to the west in accordance with the International Astronomical Union (1971) (Seidelmann and others, 2002). The geometric control network was computed at the RAND Corporation using RAND's most recent solution as of April 1999 (Davies and Katayama, 1981; Davies and others, 1998). This process involved selecting control points on the individual images, making pixel measurements of their locations, using reseau locations to correct for geometric distortions, and converting the measurements to millimeters in the focal plane. These data are combined with the camera focal lengths and navigation solutions as input to photogrammetric triangulation software that solves for the best-fit sphere, the coordinates of the control points, the three orientation angles of the camera at each exposure (right ascension, declination, and twist), and an angle (W0) which defines the orientation of Callisto in space. W0-in this solution 259.51°-is the angle along the equator to the east, between the 0° meridian and the equator's intersection with the celestial equator at the standard epoch J2000.0. This solution places the crater Saga at its defined longitude of 326° west (Seidelmann and others, 2002). This global map base uses the best image quality and moderate resolution coverage supplied by Galileo SSI and Voyager 1 and 2 (Batson, 1987; Becker and others, 1998; Becker and others, 1999; Becker and others, 2001). The digital map was produced using Integrated Software for Imagers and Spectrometers (ISIS) (Eliason, 1997; Gaddis and others, 1997; Torson and Becker, 1997). The individual images were radiometrically calibrated and photometrically normalized using a Lunar-Lambert function with empirically derived values (McEwen, 1991; Kirk and others, 2000). A linear correction based on the statistics of all overlapping areas was then applied to minimize image brightness variations. The image data were selected on the basis of overall image quality, reasonable original input resolution (from 20 km/pixel for gap fill to as much as 150 m/pixel), and availability of moderate emission/incidence angles for topography. Although consistency was achieved where possible, different filters were included for global image coverage as necessary: clear for Voyager 1 and 2; clear and green (559 nm) for Galileo SSI. Individual images were projected to a Sinusoidal Equal-Area projection at an image resolution of 1.0 kilometer/pixel. The final constructed Sinusoidal projection mosaic was then reprojected to the Mercator and Polar Stereographic projections included on this sheet. The final mosaic was enhanced using commercial software. Names on this sheet are approved by the International Astronomical Union. Names have been applied for features clearly visible at the scale of this map; for a complete list of nomenclature for Callisto, please see the Gazeteer of Planetary Nomenclature. Font color was chosen only for readability.

IMAP↗

Controlled color photomosaic map of Ganymede Jg 15M CMNK

This sheet is one in a series of maps of the Galilean satellites of Jupiter at a nominal scale of 1:15,000,000. This series is based on data from the Galileo Orbiter Solid-State Imaging (SSI) camera and the Voyager 1 and 2 spacecraft.

IMAP↗

Single-edition quadrangle maps

In August 1993, the U.S. Geological Survey's (USGS) National Mapping Division and the U.S. Department of Agriculture's Forest Service signed an Interagency Agreement to begin a single-edition joint mapping program. This agreement established the coordination for producing and maintaining single-edition primary series topographic maps for quadrangles containing National Forest System lands. The joint mapping program saves money by eliminating duplication of effort by the agencies and results in a more frequent revision cycle for quadrangles containing national forests. Maps are revised on the basis of jointly developed standards and contain normal features mapped by the USGS, as well as additional features required for efficient management of National Forest System lands. Single-edition maps look slightly different but meet the content, accuracy, and quality criteria of other USGS products. The Forest Service is responsible for the land management of more than 191 million acres of land throughout the continental United States, Alaska, and Puerto Rico, including 155 national forests and 20 national grasslands. These areas make up the National Forest System lands and comprise more than 10,600 of the 56,000 primary series 7.5-minute quadrangle maps (15-minute in Alaska) covering the United States. The Forest Service has assumed responsibility for maintaining these maps, and the USGS remains responsible for printing and distributing them. Before the agreement, both agencies published similar maps of the same areas. The maps were used for different purposes, but had comparable types of features that were revised at different times. Now, the two products have been combined into one so that the revision cycle is stabilized and only one agency revises the maps, thus increasing the number of current maps available for National Forest System lands. This agreement has improved service to the public by requiring that the agencies share the same maps and that the maps meet a common standard, as well as by significantly reducing duplication of effort.

Fact Sheet↗

CONMAP - USGS MARINE MAPPING PROGRAM.

The U. S. Geological Survey has commenced a marine mapping program, CONMAP (the Continental Margin Maps), which is supported by, and dependent on, a foundation of digital data-bases. The goal of the program's first phase is to prepare a series of maps that completely cover the Exclusive Economic Zone. The maps will be prepared using an Albers' Conic Equal-Area Projection at a scale of 1:1,000,000. An initial product of CONMAP will be a series of base map panels portraying the topographic and bathymetric relief, political boundaries and key geographic locations. Additional maps will be prepared which portray other data types and analytical themes.

Conference Paper↗

Geology of the Calamity Mesa quadrangle, Colorado

The series of Geologic Quadrangle Maps of the United States continues the series of quadrangle maps begun with the folios of the Geologic Atlas of the United States, which were published from 1894 to 1945. The present series consists of geologic maps, supplemented where possible by structure sections, columnar sections, and other graphic means of presenting geologic data, and accompanied by a brief explanatory text to make the maps useful for general scientific and economic purposes. Full description and interpretation of the geology of the areas shown on these maps are reserved for publication in other channels, such as the Bulletins and Professional Papers of the Geological Survey. Separate maps of the same areas, covering bedrock, surficial, engineering, and other phases of geology, may be published in the geologic quadrangle map series.

Colorado↗

Potentiometric map of the lower Wilcox aquifer in Mississippi, fall 1982

This potentiometric map is the second map of the lower Wilcox aquifer in a series of maps prepared by the U.S. Geological Survey in cooperation with the Mississippi Department of Natural Resources, Bureau of Land and Water Resources, delineating the potentiometric surface of the major aquifers in Mississippi. The potentiometric surface of the lower Wilcox aquifer slopes generally to the west away from the outcrop area and it is marked by a large groundwater cone of depression in the area of Tallahatchie, Quitman, and Panola Counties. Water levels in or near the outcrop of the lower Wilcox aquifer show little longterm change. Heavy withdrawals in the downdip area have caused water level declines of about 1 to 2 feet per year since 1979 in much of the confined part of the aquifer. These water level declines in the area of Tallahatchie, Quitman, and Panola Counties have resulted in a wider cone of depression since 1979. (USGS)

Water-Resources Investigations Report↗

Controlled photomosaic map of Europa Je 15 M CMN

This sheet is one in a series of maps of the Galilean satellites of Jupiter at a nominal scale of 1:15,000,000. This series is based on data from the Galileo Orbiter Solid-State Imaging (SSI) camera and the Voyager 1 and 2 spacecraft.

IMAP↗

Mapping ecological states in the upper Colorado River basin: Implications for fire management

Spatially explicit information on ecosystem dynamics that offers a mechanistic understanding of ecological processes can benefit environmental management. Broad-scale maps based on state-and-transition models provide valuable insight into transitions among ecological states resulting from specific drivers within areas sharing similar climatic and edaphic characteristics ecological sites (ES). We aimed to quantify ecological dynamics of two ES groups in the Upper Colorado River Basin from 1986 to 2022 through annual maps of ecological states and assess potential drivers of observed state change. This region comprises important sagebrush shrublands and pinyon-juniper woodlands affected by non-native annual grass invasion, wildfires, and drought-induced tree mortality. Using field-based and remote sensing data, we modeled vegetation states using random forest models and mapped the states annually from 1986 to 2022. To demonstrate the utility of the state maps for monitoring and management, we used this time series of maps to investigate the influences of fire and drought on state occurrence. Our findings revealed a statistically significant increase in states invaded by non-native annual species (Invaded state), which replaced Grassland and Shrubland states, while Shrubland states decreased significantly, transitioning to invaded and Woodland states. Invaded states had the highest likelihood of burning, followed by Woodlands. Drought was associated with increased area of Grassland and Bare states, but with decreased area of invaded and Shrubland states. These results indicate an accelerating fire cycle is potentially leading to ongoing regional environmental degradation. Despite increasing drought conditions during the study period, the invaded states continued to increase in area, indicating additional underlying mechanisms. Our reproducible, broad-scale, ecologically-driven state mapping process enhances understanding of how drought, fire, and invasion by non-native plants can transform semiarid landscapes of the western USA.

Arizona, Colorado, New Mexico, Utah, Wyoming↗

Planetary maps

An important goal of the USGS planetary mapping program is to systematically map the geology of the Moon, Mars, Venus, and Mercury, and the satellites of the outer planets. These geologic maps are published in the USGS Miscellaneous Investigations (I) Series. Planetary maps on sale at the USGS include shaded-relief maps, topographic maps, geologic maps, and controlled photomosaics. Controlled photomosaics are assembled from two or more photographs or images using a network of points of known latitude and longitude. The images used for most of these planetary maps are electronic images, obtained from orbiting television cameras, various optical-mechanical systems. Photographic film was only used to map Earth's Moon.

General Information Product↗

Spectral matching techniques (SMTs) and automated cropland classification algorithms (ACCAs) for mapping croplands of Australia using MODIS 250-m time-series (2000–2015) data

Mapping croplands, including fallow areas, are an important measure to determine the quantity of food that is produced, where they are produced, and when they are produced (e.g. seasonality). Furthermore, croplands are known as water guzzlers by consuming anywhere between 70% and 90% of all human water use globally. Given these facts and the increase in global population to nearly 10 billion by the year 2050, the need for routine, rapid, and automated cropland mapping year-after-year and/or season-after-season is of great importance. The overarching goal of this study was to generate standard and routine cropland products, year-after-year, over very large areas through the use of two novel methods: (a) quantitative spectral matching techniques (QSMTs) applied at continental level and (b) rule-based Automated Cropland Classification Algorithm (ACCA) with the ability to hind-cast, now-cast, and future-cast. Australia was chosen for the study given its extensive croplands, rich history of agriculture, and yet nonexistent routine yearly generated cropland products using multi-temporal remote sensing. This research produced three distinct cropland products using Moderate Resolution Imaging Spectroradiometer (MODIS) 250-m normalized difference vegetation index 16-day composite time-series data for 16 years: 2000 through 2015. The products consisted of: (1) cropland extent/areas versus cropland fallow areas, (2) irrigated versus rainfed croplands, and (3) cropping intensities: single, double, and continuous cropping. An accurate reference cropland product (RCP) for the year 2014 (RCP2014) produced using QSMT was used as a knowledge base to train and develop the ACCA algorithm that was then applied to the MODIS time-series data for the years 2000–2015. A comparison between the ACCA-derived cropland products (ACPs) for the year 2014 (ACP2014) versus RCP2014 provided an overall agreement of 89.4% (kappa = 0.814) with six classes: (a) producer’s accuracies varying between 72% and 90% and (b) user’s accuracies varying between 79% and 90%. ACPs for the individual years 2000–2013 and 2015 (ACP2000–ACP2013, ACP2015) showed very strong similarities with several other studies. The extent and vigor of the Australian croplands versus cropland fallows were accurately captured by the ACCA algorithm for the years 2000–2015, thus highlighting the value of the study in food security analysis. The ACCA algorithm and the cropland products are released through http://croplands.org/app/map and http://geography.wr.usgs.gov/science/croplands/algorithms/australia_250m.html

International Journal of Digital Earth↗

Petroleum potential of wilderness lands in the Western United States

In 1982-83, the U.S. Geological Survey (USGS) conducted an investigation of the oil and gas potential of the designated and proposed Wilderness Lands in the Western United States. The scope of this study was limited to the assessment of conventional recoverable petroleum resources occurring in the designated and proposed Wilderness Lands of the Western United States that are administered under four Federal agencies: Bureau of Land Management (BLM), U.S. Forest Service (USFS), National Park Service (NPS), and Fish and Wildlife Service (FWS). The total area of the study included approximately 74 million acres of Wilderness Lands in these 11 Western States: Arizona, California, Colorado, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, and Wyoming. The 74 million acres represent 31 percent of the total Federal lands within these 11 Western States. Approximately 49 percent of all the lands in these States are federally owned. The objective of this study was to assemble through various means all the available pertinent information that could be brought together within the USGS and integrate these data into a computer-based digital cartographic data system that was focused upon the single issue of reviewing the known geological and geophysical data to determine the geologic characteristics favorable or unfavorable for the occurrence of petroleum resources in these Wilderness Lands. In a joint effort in the USGS between the Geologic Division (GD) and the National Mapping Division (NMD) all of the mappable information used in this study was prepared and processed by using digital cartographic techniques. These include digitizing the location and boundaries of the Wilderness Lands; acreage calculations; the boundaries of the USGS petroleum provinces; and the geologic and tectonic boundaries within each petroleum province and State. In addition, searches were conducted on well data files which provided the locations and geologic information on over 5,000 wells drilled within or immediately adjacent to the Wilderness Lands. An analysis of all the geologic characteristics favorable or unfavorable for petroleum occurrence in conjunction with the geologic settings for the Wilderness Lands scattered within the framework of the petroleum provinces was performed by a team of geologists on each of the wilderness tracts. The geologic characteristics reviewed for each tract included the presence or absence of the following: adequate source beds and reservoir rocks; adequate trapping mechanisms; favorable thermal and maturation histories; presence of petroleum seeps or adjacent wells with shows or production; and the presence of favorable sedimentary rock sections underlying volcanic terrane or faulted and overthrust areas. A description of the geology and geologic framework is provided for each State along with an explanation of the interpretative geology and evaluation of the petroleum potential within the locale of each of the wilderness tracts. The assessment of the petroleum resources on the Wilderness Lands was completed in two separate stages. In the first stage the geologists evaluated the geological characteristics for the favorability or lack of favorability for the occurrence of oil and natural gas within each wilderness tract and assigned a qualitative rating for each tract's potential for the occurrence of recoverable oil and gas resources. In the second stage in evaluating the petroleum potential for the wilderness tracts, an effort was made to arrive at a quantitative assessment within the framework of the USGS's latest published resource estimates which are made on a province basis. The geologic characteristics evaluated for the favorability of petroleum occurrence within each of the clusters of wilderness tracts were the determining factors for the subjective assessments of the petroleum potential for each wilderness tract occurring within the respective basin or province. The quantitative resource assessments are subjectively determined as to the richness and potential of the wilderness tracts relative to the total petroleum potential for the respective petroleum province within which they occur. The results of the qualitative analysis of the petroleum potential of the Wilderness Lands are tabulated by total acreages for each wilderness tract as classified by its potential rating. These tabulations are made for the Wilderness Lands by petroleum province, by State, and for the total Wilderness Lands in the 11 Western States. A summary is provided of the petroleum potential by acreage for all the Wilderness Lands in the Western United States by State and for the total 11 States. At least 34 percent of the total acreage for Wilderness Lands, or approximately 25 million acres, may have the geologic characteristics necessary for the occurrence of petroleum resources in varying amounts (high, medium, and low potential). An additional 33 percent of the Wilderness Lands may have some limited potential where small sedimentary areas are mixed within igneous and metamorphic terranes, but are more likely to fall in the low to zero potential. Finally, 33 percent of the Wilderness Lands probably have no petroleum potential because they are located in terranes with predominantly igneous and (or) metamorphic rocks that are unfavorable for the occurrence of petroleum. The quantitative petroleum assessments for the Wilderness Lands in the Western United States represent a part of the total estimate of the remaining undiscovered oil and natural gas for the 38 petroleum provinces, as defined by Dolton and others in USGS Circular 860 in 1981, within which the Wilderness Lands occur. The undiscovered recoverable oil for the Wilderness Lands in the Western States is estimated to range from 0.555 to 1.490 billion barrels with a mean estimate of 0.834 billion barrels. The undiscovered recoverable natural gas is estimated to range from 5.536 to 16.639 trillion cubic feet with a mean estimate of 9. 729 trillion cubic feet. Each range corresponds to the 95 and 5 percent probabilities of more than the respective amounts. The estimates reported at the 95 percent and 5 percent probabilities and the mean estimates for oil and gas are summarized for the separate States and the aggregated totals. A series of printed maps, one for each Western State, accompanies this report (Miscellaneous Investigations Series Maps I-1537-I-1547, in press) and shows in color the location and qualitative petroleum potential of the Wilderness Lands studied, with BLM identification of tracts; the boundary locations of all major Federal and Indian lands; the boundaries and identification of the USGS petroleum provinces; and other base information. A pamphlet will accompany each State map describing the geology of the State and the local geology relative to the position of the wilderness tracts and their petroleum potential. These maps were compiled by using traditional cartographic techniques from digitally produced graphics and are published as separate sheets for each State at a scale of 1:1,000,000.

Circular↗

Geopressure gradient maps of Southern Louisiana, state, and vicinity

This series of five maps characterizes the subsurface pressure system of southern Louisiana, including the associated State and Federal waters. These maps were generated using the U.S. Geological Survey’s (USGS) comprehensive geopressure-gradient model (Burke et al., 2012b, 2013) that delineates the regional pressure system spanning the onshore and offshore Gulf of Mexico basin, USA. Previously, the model was used to generate ten regional-scale maps (Burke et al., 2012a): five contour maps characterized the depth to the surface defined by the first occurrence of regional isopressure gradients ranging from 0.60 psi/ft to 1.00 psi/ft, in 0.10-psi/ft increments; and five supporting maps displayed the spatial density of the data used to construct the regional contour maps. Explanation of generalized geopressure gradients and pressure-regime nomenclature is given here. The five contour maps in this series characterize the depth to the surface defined by the first occurrence of isopressure gradients ranging from 0.60 psi/ft to 1.00 psi/ft, in 0.10-psi/ft increments. The geographical extent of this geopressure-gradient model is delineated on the maps, which encompass one of the most densely drilled regions of southern Louisiana and adjacent areas. The boundary of the model represents the area of greatest well density to maintain accurate contouring to the edge of the model. The pressure data were obtained from the IHS database (IHS Energy Group, 2011) and geologic folios (Dodge and Posey, 1981; Bebout and Gutiérrez, 1982; 1983; Eversull, 1984; Foote et al., 1990), which were compiled and digitally archived (Burke et al., 2011). Data quality analysis, linear-pressure interpolation calculations, and contouring algorithms defining the geopressure-gradient model are described by Burke et al. (2012b, 2013). The isopressure-gradient trends depicted on these maps are not intended for detailed interpretation at specific locations.

Louisiana↗

Preliminary surficial geologic map of a Calico Mountains piedmont and part of Coyote Lake, Mojave desert, San Bernardino County, California

This 1:24,000 scale detailed surficial geologic map and digital database of a Calico Mountains piedmont and part of Coyote Lake in south-central California depicts surficial deposits and generalized bedrock units. The mapping is part of a USGS project to investigate the spatial distribution of deposits linked to changes in climate, to provide framework geology for land use management (http://deserts.wr.usgs.gov), to understand the Quaternary tectonic history of the Mojave Desert, and to provide additional information on the history of Lake Manix, of which Coyote Lake is a sub-basin. Mapping is displayed on parts of four USGS 7.5 minute series topographic maps. The map area lies in the central Mojave Desert of California, northeast of Barstow, Calif. and south of Fort Irwin, Calif. and covers 258 sq.km. (99.5 sq.mi.). Geologic deposits in the area consist of Paleozoic metamorphic rocks, Mesozoic plutonic rocks, Miocene volcanic rocks, Pliocene-Pleistocene basin fill, and Quaternary surficial deposits. McCulloh (1960, 1965) conducted bedrock mapping and a generalized version of his maps are compiled into this map. McCulloh's maps contain many bedrock structures within the Calico Mountains that are not shown on the present map. This study resulted in several new findings, including the discovery of previously unrecognized faults, one of which is the Tin Can Alley fault. The north-striking Tin Can Alley fault is part of the Paradise fault zone (Miller and others, 2005), a potentially important feature for studying neo-tectonic strain in the Mojave Desert. Additionally, many Anodonta shells were collected in Coyote Lake lacustrine sediments for radiocarbon dating. Preliminary results support some of Meek's (1999) conclusions on the timing of Mojave River inflow into the Coyote Basin. The database includes information on geologic deposits, samples, and geochronology. The database is distributed in three parts: spatial map-based data, documentation, and printable map graphics of the database. Spatial data are distributed as an ArcInfo personal geodatabase, or as tabular data in the form of Microsoft Access Database (MDB) or dBase Format (DBF) file formats. Documentation includes this file, which provides a discussion of the surficial geology and describes the format and content of the map data, and Federal Geographic Data Committee (FGDC) metadata for the spatial map information. Map graphics files are distributed as Postscript and Adobe Acrobat Portable Document Format (PDF) files, and are appropriate for representing a view of the spatial database at the mapped scale.

Open-File Report↗