Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Petrology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
USGS1964

Bottom sediments of Saginaw Bay, Michigan

Saginaw Bay is a southwest extension of Lake Huron on the east shore of the Southern Peninsula of Michigan. It is a shallow-water derivative of the Pleistocene Lake Saginaw. Sixty-one bottom samples were collected on a semigrid pattern and analyzed physically. Findings were treated statistically. Sediments range in size from large pebbles to clay. Medium- to fine-grained clear quartz sand is common to all parts of the bay. Currents and wave action are primarily responsible for both median diameter and sorting distribution patterns. Only a very general correlation can be established between depth and median diameter. Heavy minerals occur in abundance locally and show an affinity to shallow-water areas subject to prevailing currents. Shape also locally determines heavy mineral concentrations. Only general conclusions can be established from roundness and sphericity and acid-soluble content. Increased organic content is correlative with quiet water environments. The shallow-water, heterogeneous nature of Saginaw Bay is not conducive to the recognition of sedimentary criteria suitable for correlations in other than a local environment.

Journal of Sedimentary Petrology↗
USGS1966

Color variations within glacial till, east-central North Dakota--A preliminary investigation

Color variations (orange zones within buff-colored till) in drift in east-central North Dakota are believed to represent two tills of separate origin. Mean size, standard deviation, and number and type of pebbles show greater difference between the two tills than do skewness, kurtosis, and partial chemical analyses. Probably blocks of older till were moved by the last glacier crossing the area and were redeposited in a matrix of younger till.

Journal of Sedimentary Petrology↗
USGS1991

Mineralogy of the silt fraction in surficial sediments from the outer continental shelf off southeastern New England

The silt-sized heavy mineral assemblage, which is predominantly detrital, has been concentrated in this fraction by hydraulic factors and ranges between 11.8 wt. % of the silt fraction in the sandy sediments near Georges Bank to 3.4% in the clayey silt deposit south of Martha's Vineyard. By contrast, the sand fraction averages only 1.5% heavy minerals. Lateral variability within the silt-sized heavy mineral assemblage is considerable. Zircon and ilmenite abundances progressively decrease from east to west on the continental shelf off southeastern New England. Conversely, abundances within the amphibole and the epidote groups increase from east to west.

Journal of Sedimentary Petrology↗
USGS1991

Modern sedimentary environments in Boston Harbor, Massachusetts

Analyses of sidescan-sonar records supplemented by available bathymetric, sedimentary, subbottom, and bottom-current data reveal the distributions of the following three categories of sedimentary environments within the glaciated, topographically complex Boston Harbor estuary in Massachusetts. 1) Environments of erosion appear on the sonographs either as patterns with isolated strong reflections or as uniform patterns of strong reflectivity. These patterns define outcrops of bedrock or till and coarse lag deposits that are being scoured and winnowed by tidal- and wave-induced currents. Erosional areas are located primarily along mainland and insular shores, within large channels that have strong tidal currents, atop submerged ridges and knolls, and across much of the harbor entrance. 2) Environments of deposition are depicted on the sidescan-sonar records as smooth, featureless surfaces that have low to moderate reflectivity. Depositional environments are found predominantly over shallow subtidal flats and in broad bathymetric lows where tidal currents are weak. Sediments within depositional areas are organic-rich sandy and clayey silts that are accumulating at rates ranging from 0.01 to 0.11 g/cm 2 /yr or 4000 to 46,100 metric tons/yr. The cumulative mass of modern mud in harbor depocenters is 24.3 million metric tons. 3) Environments of sediment reworking constitute areas affected by a combination of erosional and depositional processes. They are characterized on the sonographs by mosaics of light and dark patches produced by relatively subtle and gradational changes in reflectivity. Reworked sediments have diverse grain sizes that overlap and are transitional between those of the other two sedimentary environments, and they are indicative of highly variable bottom currents.

Massachusetts↗
USGS1991

Porosity trends of the Lower Cretaceous J Sandstone, Denver Basin, Colorado

This study examines relationships between porosity and time-temperature history, and the influence of rock properties upon porosity, for the Lower Cretaceous J Sandstone in the Colorado portion of the Denver basin. The J Sandstone is classified as a quartzarenite to litharenite and was deposited in nearshore-marine, deltaic, and fluvial-estuarine (valley-fill) settings. Principal elements of its paragenetic sequence include quartz cementation and pressure solution, carbonate cementation and dissolution, dissolution of feldspar and rock fragments, and formation of authigenic clays. Porosity versus vitrinite reflectance (R 0 ) regression lines of the form Phi = A(R 0 )Beta (where B is a negative number) depicting the 10th, 25th, 50th, 75th, and 90th porosity percentiles of the J Sandstone were derived from 963 core-plug measurements representing 31 wells. The data span a thermal maturity range of R 0 = 0.41%-1.14%. Porosity distributions at different locations within the basin can be estimated as a function of thermal maturity on the basis of these regression lines. Porosity trends of the J Sandstone, if considered as a function of R 0 , are similar to those of broad, composite data sets representing sandstones in general. The petrographic factors that most affect J Sandstone porosity variability at a given level of thermal maturity are carbonate cementation and clay content. Carbonate cement, where present, reduces porosity. If previously more widespread, carbonate cement could also introduce porosity heterogeneity by temporarily preserving the pore network relative to uncemented intervals. Abundant detrital and authigenic clay reduces porosity by occupying pores. Low clay content indirectly reduces porosity because the inhibiting effects of clay upon quartz cementation and pressure solution are largely absent.

Journal of Sedimentary Petrology↗
USGS1992

Role of microbial processes in linking sandstone diagenesis with organic-rich clays

Numerous chemical reactions within clay sequences have been proposed to produce dissolved material for diagenesis of deeply-buried sands. However, reactions responsible for solubilizing inorganic and organic constituents in clays at intermediate depths, and their importance to sandstone diagenesis, have not been evaluated. Results from this study show that the processes of microbial organic-acid production (via fermentation) in clays and microbial organic-acid consumption (via sulfate reduction) in sands effectively link organic-rich clays to sandstone diagenesis in the Black Creek Formation of South Carolina. Diagenetic processes have resulted in the formation of 10 volume percent calcite cement, 0.1 volume percent authigenic pyrite, and 1.5 volume percent secondary porosity in Black Creek sands. However, the distribution of these diagenetic processes is not uniform, resulting in net destruction of porosity in some parts of the sand and net porosity enhancement in other parts. Mass balance-derived rates of microbial organic-acid production (10 (super -5) mmole carbon 1 (super -1) yr (super -1) ) and microbial CO 2 production (4 x 10 (super -5) mmole l (super -1) yr (super -1) ) show that microbial processes can account for all organic carbon in the calcite cements (at least 11% of carbonate carbon based on isotope-balance calculations), all observed authigenic pyrite, and all observed secondary porosity. These findings show that microbial processes can serve to link organic-rich clays with sandstone diagenesis at intermediate depths.

Journal of Sedimentary Petrology↗
USGS1992

Lithofacies analysis of colluvial sediments - an aid in interpreting the recent history of Quaternary normal faults in the Basin and Range Province, western United States

Inferring the frequency and magnitude of past earthquakes from the stratigraphy in exposures of normal-faulted sediments is difficult because colluvial lithofacies assemblages adjacent to faults are complex. Similarities in facies assemblages adjacent to young fault scarps in arid to semiarid areas, such as the Basin and Range province, allow lithofacies to be grouped into two genetic architectural elements: debris and wash elements. Upper and lower facies associations can commonly be recognized within each element. A lithofacies code scheme, similar to those used in the analysis of fluvial and glacial lithofacies sequences, provides a concise way of illustrating lithofacies relations in fault exposures. The source lithology of colluvial lithofacies is shown in the code, and soil-horizon symbols can be included. The architecture of lithofacies assemblages near fault scarps in semiarid areas is explained by a model of colluvial sedimentation in response to a single surface faulting event. Analysis of lithofacies assemblages exposed in three trenches across normal faults in the eastern Basin and Range shows how the model can be used to interpret fault histories. Similar facies analysis methods may be useful in interpreting colluvial sequences formed by non-tectonic processes.

Journal of Sedimentary Petrology↗
USGS1982

Siderite concretions: indicators of early diagenesis in the Gammon shale (Cretaceous).

The Gammon member of the Pierre shale of the northern Great Plains, USA, contains abundant siderite concretions. The relative depth and time of siderite precipitation can be inferred from the structure, mineralogy and isotopic composition of these concretions. Concretions that formed at shallow depths, early in the history of the sediment, contain a high percentage (75-85%) of carbonate, preserve uncompacted structures and have oxygen isotopic ratios similar to that of sea-water. In contrast, concretions that formed later and/or at greater depths have lower carbonate content and lower 18O/16O ratios. Concretions in rapidly deposited sediments formed at shallow depths (<10 m), and those in sediments that accumulated slowly formed at greater depths. These differences agree with the fossil evidence. Siderite did not form until nearly all the dissolved sulphur had been reduced and precipitated as pyrite; the excess organic matter produced methane at about the same time.-H.R.B.

Journal of Sedimentary Petrology↗
USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗
USGS1971

Remanent magnetization and susceptibility of late Cenozoic rocks from New Zealand

Measurements of magnetic remanence and susceptibility were made on 176 samples of volcanic rocks from 22 late Cenozoic formations from the North Island. Intensities of remanence, susceptibilities, and Q ratios are highly variable in both the ignimbrites and andesites and their ranges overlap, indicating that the magnetic anomalies produced by ignimbrite bodies would be difficult to distinguish from those produced by andesite flows. An analysis of the directions of magnetization of the ignimbrites indicates that groups of petrologically distinct ignimbrites probably formed during the same volcanic episode.

North Island↗
USGS2022

Finalization of the Confocal Laser Scanning Microscopy (CLSM) working group

A working group in Commission II to investigate applications of confocal laser scanning microscopy (CLSM) for organic petrology investigations has finalized with publication of the manuscript “Characterization of bituminite in Kimmeridge Clay by confocal laser scanning and atomic force microscopy” in the International Journal of Coal Geology. The manuscript is available via Open Access from https://doi.org/10.1016/j.coal.2022.103927 and also from the Commission II working group (WG) webpage https://www.iccop.org/workinggroup/confocal-laser-scanning-microscopy-clsm/. A report detailing the full history and results from the WG also is available from the Commission II WG webpage. The working group investigated the application of CLSM to an organic-rich (44 wt.% TOC), thermally immature sample (VRo 0.42%) of the Kimmeridge Clay Formation. CLSM imaging and spectroscopy and atomic force microscopy (AFM) were used to characterize bituminite.

ICCP News↗
USGS2012

Review and update of the applications of organic petrology: Part 2, geological and multidisciplinary applications

The present paper is focused on organic petrology applied to unconventional and multidisciplinary investigations and is the second part of a two part review that describes the geological applications and uses of this branch of earth sciences. Therefore, this paper reviews the use of organic petrology in investigations of: (i) ore genesis when organic matter occurs associated with mineralization; (ii) the behavior of organic matter in coal fires (self-heating and self-combustion); (iii) environmental and anthropogenic impacts associated with the management and industrial utilization of coal; (iv) archeology and the nature and geographical provenance of objects of organic nature such as jet, amber, other artifacts and coal from archeological sites; and (v) forensic science connected with criminal behavior or disasters. This second part of the review outlines the most recent research and applications of organic petrology in those fields.

International Journal of Coal Geology↗
USGS2020

Seismic tomography of compressional wave velocity and attenuation structure for Makushin Volcano, Alaska

Located in the central portion of the Alaska-Aleutian subduction zone, Makushin Volcano is among the most active volcanoes in the United States and has been classified as a very high threat by the National Volcano Early Warning System based on its eruptive history and proximity to the City of Unalaska and international air routes. In 2015, five individual seismic stations and three mini seismic arrays of 15 stations each were deployed on Unalaska island to supplement the Alaska Volcano Observatory permanent seismic network. This temporary array was operational for one year. Taking advantage of the increased azimuthal coverage and the array’s increased earthquake detection capability, we developed body-wave Vp and Vp/Vs seismic images of the velocity structure beneath the volcano. Our results show a complex structure with the upper 4 km of the crust. The shallow high-Vp features possibly delineate remnant magma pathways or conduits. Low-Vp regions are found east of the caldera at approximately 4-8 km depth. This is in agreement with previous seismic tomographic work and InSAR-based geodetic models, which had identified this region as a possible long-term source of magma. A three-dimensional compressional wave attenuation model complemented the velocity models. In general, we observe regions of corresponding low P-wave velocity and high attenuation east of the summit caldera between 5 and 7 km depth, supporting the presence of a melt-rich zone. The absolute Vp values (5.5-6.0 km/s) in this region are consistent with the presence of a magma body with a mafic signature. We suggest that a triggering mechanism that involves mafic injections into a more evolved shallow magma chamber is representative of the current magmatic system below the volcano, similarly to what petrological studies have inferred for past eruptions.

Alaska↗
USGS2012

The Kanuti ophiolite, Alaska

The Kanuti ophiolite is a mafic-ultramafic thrust sheet of probable Jurassic age, formerly considered to be the upper part of the Yukon-Koyukuk ophiolite belt (Angayucham terrane). It is here called the Kanuti ophiolite after the Kanuti River region on the southeastern flank of the Yukon-Koyukuk Basin. The thrust sheet crops out discontinuously for a distance of more than 900 km along the northern and southeastern margins of the basin. It is probably correlative with similar ophiolite thrust sheets to the north in the western Brooks Range and to the south in the Ruby geanticline. Technically, the ophiolite is considered to be the Kanuti thrust panel of the Angayucham-Totzitna terrane. The Kanuti consistently overlies another extensive thrust sheet, consisting mostly of pillow basalt and radiolarian chert of Devonian to Jurassic age (Narvak thrust panel). This sheet is thrust over a third sheet consisting of probable Devonian phyllite and metagraywacke, which is in turn thrust over older metamorphic rocks (Slate Creek thrust panel). The Kanuti ophiolite is a partial ophiolite that consists of a lower residual mantle suite and an upper magmatic suite, but dikes, extrusives, and sediments are absent. The residual mantle suite is composed of harzburgite and dunite with refractory mineral compositions. The harzburgite is attributed to partial melting and extraction of basaltic magma; residual dunite is attributed to partial melting or to reaction of orthopyroxene out of harzburgite in contact with ascending melt diapirs. The magmatic suite consists of layered ultramafic and gabbroic rocks, containing minerals having limited iron enrichment. The absence of large volumes of magmatic rocks intermediate in composition between cumulus ultramafics and evolved gabbros favors periodic introduction of magma, rather than closed system fractional crystallization. The ultramafic rocks of both the residual mantle and magmatic suites are tectonites, which have undergone high-temperature deformation involving isoclinal folding on all scales and related syntectonic recrystallization. The olivine fabric is consistent with the glide system {0kl} [100], which has been produced experimentally at 800°–1190°C at 20 kbar. Olivine Z axes and subparallel isoclinal fold axes have consistent, northeast trends throughout the Kanuti region (>100 km NE-SW) and may be close to the original upper mantle flow direction, despite later low-angle thrust faulting. The order of crystallization in the cumulus ultramafic rocks of the magmatic suite is olivine, clinopyroxene, plagioclase, and orthopyroxene. The high Mg numbers of clinopyroxene (0.85–0.93) coexisting with olivine suggest that the cumulus ultramafic rocks crystallized at relatively high pressures (>10 kbar). The effects of parental magma composition cannot be evaluated, but the small difference in Mg numbers of coexisting olivine and clinopyroxene in the cumulus ultramafic rocks and in residual harzburgite suggests that regardless of absolute pressures, the pressure difference between the melting that produced the basalt magma and the initial fractional crystallization of the magma is small. Because of the limited range in rock types in the ophiolite, the tectonic environment cannot be interpreted unambiguously. However, the structural and petrological data are best reconciled with an origin in a volcanic arc tectonic setting.

Journal of Geophysical Research Solid Earth↗
USGS2012

Review and update of the applications of organic petrology: Part 1, geological applications

Organic petrology developed as coal petrology at the beginning of the 20th century dedicated mainly to the study of coals because of their utilization in industry. Coal petrology was then considered a branch of coal science. Later, with the development of specialized nomenclature, classification of coal components, and the standardization and improvement of analytical (microscopical) methods, this discipline expanded in interests and name, becoming organic petrology. Organic petrology carries a broader context, being as well a tool applied in the study of dispersed organic matter in sedimentary rocks due to its importance in exploration for fossil fuel resources. At present, organic petrology is a discipline widely recognized for its role in fundamental and applied research with respect to both coal utilization and in geosciences. Throughout the 20th century several important monographs have been published on the discipline of organic petrology, including “Stach's textbook of coal petrology” (1st edition 1935, 2nd 1975, 3rd 1982), updated as the more general “Organic petrology” by Taylor et al. (1998). More recently, the text “Applied coal petrology: the role of petrology in coal utilization” was published by Suárez-Ruiz and Crelling (2008). This review is the first in a two-part review series that describes and updates the role of organic petrology in geosciences. A second part complementing this one and focused on the applications of organic petrology to other scientific fields will follow.

International Journal of Coal Geology↗
USGS2019

Application of electron microscopy TEM and SEM for analysis of coals, organic-rich shales and carbonaceous matter

This paper provides a brief summary of the history, development and variety of applications of electron microscopy techniques to analyze coals, organic-rich shales, and carbonaceous materials. General construction and principles of operation of transmitted (TEM) and scanning electron microscope (SEM) are outlined, along with guidance on specimen preparation, and a brief overview of published TEM and SEM applications related to coal, shales, and carbonaceous materials. This work was accepted as the chapter 18.2 of International Committee for Coal and Organic Petrology Methods Handbook at the ICCP Plenary Session on September 27, 2018 in Brisbane (Australia).

International Journal of Coal Geology↗
USGS1994

The 1989-1990 eruptions of Redoubt Volcano: an introduction

Redoubt Volcano, located on the west side of Cook Inlet in south-central Alaska, erupted explosively on over 20 separate occasions between December 14, 1989 and April 21, 1990. Fourteen lava domes were emplaced in the summit area, thirteen of which were subsequently destroyed. The eruption caused economic losses estimated at over $160,000,000 making this the second most costly eruption in U.S. history. This economic impact provided the impetus for a integrated comprehensive account of an erupting volcano using both modern and classical research and modern techniques which in turn led to advances in eruption monitoring and interpretation. Research on such topics as dome formation and collapse and the resulting pyroclastic flows, elutriated ash, lightning, tephra, and flooding was blended with the rapid communication of associated hazards to a large user group. The seismology successes in predicting and monitoring eruption dynamics were due in part to (1) the recognition of long-period seismic events as indicators of the readiness of the volcano to erupt, and (2) to the development of new tools that allowed the seismicity to be assessed instantaneously. Integrated studies of the petrology of erupted products and volatile content over time gave clues as to the progress of the eruption towards completion.

Alaska↗