Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Geophysical Research- Oceans”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
USGS2018

Salt marsh loss affects tides and sediment budget in shallow bays

The current paradigm is that salt marshes and their important ecosystem services are threatened by global climate change; indeed, large marsh losses have been documented worldwide. Morphological changes associated with salt marsh erosion are expected to influence the hydrodynamics and sediment dynamics of coastal systems. Here the influence of salt marsh erosion on the tidal hydrodynamics and sediment storage capability of shallow bays is investigated. Hydrodynamics, sediment transport, and vegetation dynamics are simulated using the numerical framework Coupled Ocean‐Atmosphere‐Wave‐Sediment Transport in the Barnegat Bay‐Little Egg Harbor system, USA. We show that salt marsh erosion influences the propagation of tides into back‐barrier basins, reducing the periodic inundation and sediment delivery to marsh platforms. As salt marshes erode, the sediment trapping potential of marsh platforms decreases exponentially. In this test case, up to 50% of the sediment mass trapped by vegetation is lost once a quarter of the marsh area is eroded. Similarly, without salt marshes the sediment budget of the entire bay significantly declines. Therefore, a positive feedback might be triggered such that as the salt marsh retreats the sediment storage capacity of the system declines, which could in turn further exacerbate marsh degradation.

New Jersey↗
USGS2012

Magnetic effects of maghemitization of oceanic crust

Both theoretical considerations and available experimental results indicate that magnetic effects of maghemitization are strongly dependent on the grain size of the originally unoxidized titanomagnetite. Maghemitization of single‐domain titanomagnetite results in a decrease in coercivity, an increase in susceptibility, and a large decrease in Q ratio. Maghemitization of multidomain titanomagnetite results in an increase in coercivity, a decrease in susceptibility, and no large changes in Q ratio. Single‐domain titanomagnetite is probably resistant to the development of a chemical remanent magnetization (CRM), whereas multidomain titanomagnetite can acquire a CRM during maghemitization. The behavior of pseudo‐single‐domain titanomagnetite, which is the main carrier of remanence in submarine extrusive rocks, is investigated by comparing the magnetic properties of the French‐American Mid‐Ocean Undersea Study (FAMOUS) (less than 0.1 m.y. old) and the Leg 37 (3.5 m.y. old) pillow basalts recovered from the Mid‐Atlantic Ridge near 37°N. Combining electron microprobe analyses, Curie temperature measurements, and cell edge determinations, we find that the FAMOUS rocks are already oxidized ( z = 0.38), possibly as a result of some high‐temperature maghemitization during cooling of the magma. Comparison with the more highly oxidized ( z = 0.7) Leg 37 pillow basalts indicates that low‐temperature maghemitization of such rocks does not result in appreciable changes of coercivity and susceptibility, although the Q ratio does decrease and CRM seems to be acquired. Such a CRM could account for the anomalously low magnetic inclinations observed at most of the Leg 37 sites.

Journal of Geophysical Research B: Solid Earth↗
USGS2014

Methane hydrates in nature - Current knowledge and challenges

Recognizing the importance of methane hydrate research and the need for a coordinated effort, the United States Congress enacted the Methane Hydrate Research and Development Act of 2000. At the same time, the Ministry of International Trade and Industry in Japan launched a research program to develop plans for a methane hydrate exploratory drilling project in the Nankai Trough. India, China, the Republic of Korea, and other nations also have established large methane hydrate research and development programs. Government-funded scientific research drilling expeditions and production test studies have provided a wealth of information on the occurrence of methane hydrates in nature. Numerous studies have shown that the amount of gas stored as methane hydrates in the world may exceed the volume of known organic carbon sources. However, methane hydrates represent both a scientific and technical challenge, and much remains to be learned about their characteristics and occurrence in nature. Methane hydrate research in recent years has mostly focused on: (1) documenting the geologic parameters that control the occurrence and stability of methane hydrates in nature, (2) assessing the volume of natural gas stored within various methane hydrate accumulations, (3) analyzing the production response and characteristics of methane hydrates, (4) identifying and predicting natural and induced environmental and climate impacts of natural methane hydrates, (5) analyzing the methane hydrate role as a geohazard, (6) establishing the means to detect and characterize methane hydrate accumulations using geologic and geophysical data, and (7) establishing the thermodynamic phase equilibrium properties of methane hydrates as a function of temperature, pressure, and gas composition. The U.S. Department of Energy (DOE) and the Consortium for Ocean Leadership (COL) combined their efforts in 2012 to assess the contributions that scientific drilling has made and could continue to make to advance our understanding of methane hydrates in nature. COL assembled a Methane Hydrate Project Science Team with members from academia, industry, and government. This Science Team worked with COL and DOE to develop and host the Methane Hydrate Community Workshop, which surveyed a substantial cross section of the methane hydrate research community for input on the most important research developments in our understanding of methane hydrates in nature and their potential role as an energy resource, a geohazard, and/or as an agent of global climate change. Our understanding of how methane hydrates occur in nature is still growing and evolving, and it is known with certainty that field, laboratory, and modeling studies have contributed greatly to our understanding of hydrates in nature and will continue to be a critical source of the information needed to advance our understanding of methane hydrates.

Journal of Chemical and Engineering Data↗
USGS2012

Juan de Fuca slab geometry and its relation to Wadati-Benioff zone seismicity

A new model of the subducted Juan de Fuca plate beneath western North America allows first-order correlations between the occurrence of Wadati-Benioff zone earthquakes and slab geometry, temperature, and hydration state. The geo-referenced 3D model, constructed from weighted control points, integrates depth information from earthquake locations and regional seismic velocity studies. We use the model to separate earthquakes that occur in the Cascadia forearc from those that occur within the underlying Juan de Fuca plate and thereby reveal previously obscured details regarding the spatial distribution of earthquakes. Seismicity within the slab is most prevalent where the slab is warped beneath northwestern California and western Washington suggesting that slab flexure, in addition to expected metamorphic dehydration processes, promotes earthquake occurrence within the subducted oceanic plate. Earthquake patterns beneath western Vancouver Island are consistent with slab dehydration processes. Conversely, the lack of slab earthquakes beneath western Oregon is consistent with an anhydrous slab. Double-differenced relocated seismicity resolves a double seismic zone within the slab beneath northwestern California that strongly constrains the location of the plate interface and delineates a cluster of seismicity 10 km above the surface that includes the 1992 M7.1 Mendocino earthquake. We infer that this earthquake ruptured a surface within the Cascadia accretionary margin above the Juan de Fuca plate. We further speculate that this earthquake is associated with a detached fragment of former Farallon plate. Other subsurface tectonic elements within the forearc may have the potential to generate similar damaging earthquakes.

British Columbia;California;Oregon;Washington↗
USGS2012

Tektites in Cretaceous-Tertiary boundary rocks on Haiti and their bearing on the Alvarez impact extinction hypothesis

Relic tektites are associated with a Pt-group metal abundance anomaly and shocked minerals in a thin marl bed that marks the K-T boundary on Haiti. The presence of these three impact-produced materials at the precise K-T boundary enormously strengthens the Alvarez impact extinction hypothesis. The tektites occur in smectite spherules that have external shapes typical of tektites. Their chemical and physical properties are broadly similar to those of other tektite groups, except that the Haitian tektites have lower Si and higher Fe, Ca, and Na. On average, they contain more Sc, V, Cu, Zn, Ga, Sr, Sn, and Ba and less Cr, Ni, Co, B, Mn, and Hf than Other tektite groups. Amounts of rare earth elements (REE) in the tektites indicate that their progenitor materials were not melted mafic or ultramafic oceanic crust; rather they were sedimentary deposits having a bulk composition of andesite. Rare tektites contain unusually high amounts of CaO (∼20%) and S (0.4%), and these data suggest that some target materials consisted of CaSO 4 . Anhydrite beds occur in the subsurface at two candidate impact sites (Chicxulub and Manson). Sm-Nd isotopic data for the tektites indicate that the melted precursor sediments were most likely deposited less than −400 m.y. between the Late Cretaceous and Silurian periods. Major chemical changes accompanied the diagenetic change of glass to smectite. The Haitian tektites are the first datable impact products in K-T boundary rocks, and 40 Ar- 39 Ar ages of the glass show that the K-T boundary and impact event are coeval at 64.5±0.1 Ma.

Journal of Geophysical Research↗
USGS2012

Crustal structure of the Chugach Mountains, southern Alaska: A study of peg‐leg multiples from a low‐velocity zone

A seismic refraction profile recorded along the geologic strike of the Chugach Mountains in southern Alaska shows three upper crustal high‐velocity layers (6.9, 7.2, and 7.6 km/s) and a unique pattern of strongly focussed echelon arrivals to a distance of 225 km. The group velocity of the ensemble of echelon arrivals is 6.4 km/s. Modeling of this profile with the reflectivity method reveals that the echelon pattern is due to peg‐leg multiples generated from within a low‐velocity zone between the second and third upper crustal high‐velocity layers. The third high‐velocity layer (7.6 km/s) is underlain at 18 km depth by a pronounced low‐velocity zone that produces a seismic shadow zone wherein peg‐leg multiples are seen as echelon arrivals. The interpretation of these echelon arrivals as multiples supersedes an earlier interpretation which attributed them to successive primary reflections arising from alternating high‐ and low‐velocity layers. Synthetic seismogram modeling indicates that a low‐velocity zone with transitional upper and lower boundaries generates peg‐leg multiples as effectively as one with sharp boundaries. No PmP or Pn arrivals from the subducting oceanic Moho at 30 km depth beneath the western part of the line are observed on the long‐offset (90–225 km) data. This may be due to a lower crustal waveguide whose top is the high‐velocity (7.6 km/s) layer and whose base is the Moho. A deep (∼54 km) reflector is not affected by the waveguide and has been identified in the data. Although peg‐leg multiples have been interpreted on some long‐range refraction profiles that sound to upper mantle depths, the Chugach Mountains profile is one of the few crustal refraction profiles where peg‐leg multiples are clearly observed. This study indicates that multiple and converted phases may be more important in seismic refraction/wide‐angle reflection profiles than previously recognized.

Alaska↗
USGS2020

Timescales and processes of methane hydrate formation and breakdown, with application to geologic systems

Gas hydrate is an ice-like form of water and low molecular weight gas stable at temperatures of roughly -10ºC to 25ºC and pressures of ~3 to 30 MPa in geologic systems. Natural gas hydrates sequester an estimated one-sixth of Earth’s methane and are found primarily in deepwater marine sediments on continental margins, but also in permafrost areas and under continental ice sheets. When gas hydrate is removed from its stability field, its breakdown has implications for the global carbon cycle, ocean chemistry, marine geohazards, and interactions between the geosphere and the ocean-atmosphere system. Gas hydrate breakdown can also be artificially driven as a component of studies assessing the resource potential of these deposits. Furthermore, geologic processes and perturbations to the ocean-atmosphere system (e.g., warming temperatures) can cause not only dissociation, but also more widespread dissolution of hydrate or even formation of new hydrate in reservoirs. Linkages between gas hydrate and disparate aspects of Earth’s near-surface physical, chemical, and biological systems render an assessment of the rates and processes affecting the persistence of gas hydrate an appropriate Centennial Grand Challenge. This paper reviews the thermodynamic controls on methane hydrate stability and then describes the relative importance of kinetic, mass transfer, and heat transfer processes in the formation and breakdown (dissociation and dissolution) of gas hydrate. Results from numerical modeling, laboratory, and some fields studies are used to summarize the rates of hydrate formation and breakdown, followed by an extensive treatment of hydrate dynamics in marine and cryospheric gas hydrate systems.

Journal of Geophysical Research-Solid Earth↗
USGS2012

Fluid expulsion sites on the Cascadia accretionary prism: mapping diagenetic deposits with processed GLORIA imagery

Point-discharge fluid expulsion on accretionary prisms is commonly indicated by diagenetic deposition of calcium carbonate cements and gas hydrates in near-surface (<10 m below seafloor; mbsf) hemipelagic sediment. The contrasting clastic and diagenetic lithologies should be apparent in side scan images. However, sonar also responds to variations in bottom slope, so unprocessed images mix topographic and lithologic information. We have processed GLORIA imagery from the Oregon continental margin to remove topographic effects. A synthetic side scan image was created initially from Sea Beam bathymetric data and then was subtracted iteratively from the original GLORIA data until topographic features disappeared. The residual image contains high-amplitude backscattering that we attribute to diagenetic deposits associated with fluid discharge, based on submersible mapping, Ocean Drilling Program drilling, and collected samples. Diagenetic deposits are concentrated (1) near an out-of-sequence thrust fault on the second ridge landward of the base of the continental slope, (2) along zones characterized by deep-seated strikeslip faults that cut transversely across the margin, and (3) in undeformed Cascadia Basin deposits which overlie incipient thrust faults seaward of the toe of the prism. There is no evidence of diagenetic deposition associated with the frontal thrust that rises from the dècollement. If the dècollement is an important aquifer, apparently the fluids are passed either to the strike-slip faults which intersect the dècollement or to the incipient faults in Cascadia Basin for expulsion. Diagenetic deposits seaward of the prism toe probably consist dominantly of gas hydrates.

Cascadia Basin↗
USGS2017

Sediment gravity flows triggered by remotely generated earthquake waves

Recent great earthquakes and tsunamis around the world have heightened awareness of the inevitability of similar events occurring within the Cascadia Subduction Zone of the Pacific Northwest. We analyzed seafloor temperature, pressure, and seismic signals, and video stills of sediment-enveloped instruments recorded during the 2011–2015 Cascadia Initiative experiment, and seafloor morphology. Our results led us to suggest that thick accretionary prism sediments amplified and extended seismic wave durations from the 11 April 2012 M w 8.6 Indian Ocean earthquake, located more than 13,500 km away. These waves triggered a sequence of small slope failures on the Cascadia margin that led to sediment gravity flows culminating in turbidity currents. Previous studies have related the triggering of sediment-laden gravity flows and turbidite deposition to local earthquakes, but this is the first study in which the originating seismic event is extremely distant (> 10,000 km). The possibility of remotely triggered slope failures that generate sediment-laden gravity flows should be considered in inferences of recurrence intervals of past great Cascadia earthquakes from turbidite sequences. Future similar studies may provide new understanding of submarine slope failures and turbidity currents and the hazards they pose to seafloor infrastructure and tsunami generation in regions both with and without local earthquakes.

Cascadia subduction zone↗
USGS1996

Hydrogeology of the Hawaii Scientific Drilling Project borehole KP-1 1. Hydraulic conditions adjacent to the well bore

Temperature and formation resistivity logs obtained in borehole KP-1 of the Hawaii Scientific Drilling Project indicate that the adjacent formation is characterized by several zones of distinctly different average temperature and water salinity. A series of hydraulic analyses and water sampling programs were conducted to rule out the possibility of local hydraulic effects associated with the presence of the borehole in the generation of these apparent groundwater zones. Hydraulic tests and sampling with the borehole cased to a depth of 710 m and open below that depth indicate that the deep aquifer contains seawater at a temperature nearly identical to that of the open ocean at the same depth. Various analyses give estimates of aquifer transmissivity of about 10-3 m2/s in the vicinity of the borehole. Isolation of this deeper aquifer from the overlying groundwater zones was investigated by perforating the casing at six locations and then measuring the changes in water level in the borehole, in the salinity of the fluid column, in the temperature profile of the fluid column, and in the rate of flow in the fluid column induced by the perforations. These results positively confirm that the zones of distinctly different formation properties indicated on the temperature and resistivity logs are not caused by flow in or around casing. Flow and fluid column salinity induced by the perforations also confirm significant differences between the hydraulic heads and geochemistry of the different groundwater zones inferred from the well logs.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

The nature of the crust in the Yukon-Koyukuk province as inferred from the chemical and isotopic composition of five Late Cretaceous to Early Tertiary volcanic fields in western Alaska

Late Cretaceous and early Tertiary volcanic and plutonic rocks in western Alaska comprise a vast magmatic province extending from the Alaska Range north to the Arctic Circle, south to Bristol Bay, and west to the Bering Sea Shelf. The chemical and isotopic composition of five of these Late Cretaceous to early Tertiary volcanic fields in the north central part of this province were studied to determine if Paleozoic or older continental crust underlies the Yukon-Koyukuk province. Three of the fields, the Blackburn Hills, Yukon River, and Kanuti, occur within the Yukon-Koyukuk province and two, the Sischu and Nowitna, overlie bordering Precambrian and Paleozoic metamorphic terranes to the southeast. High initial 87 Sr/ 86 Sr of 0.7075–0.7079 and moderate initial 143 Nd/ 144 Nd of 0.51244–0.51247 of rhyolite, dacite, and high-silica andesite of the Sischu volcanic field indicate that the magmas have interacted with the underlying Paleozoic or older continental crust. The relatively limited variation of isotopic (initial 87 Sr/ 86 Sr = 0.7044–0.7051; initial 143 Nd/ 144 Nd = 0.51256–0.51257) and elemental compositions of andesites from the Nowitna field can be accounted for by assimilation of small amounts of Paleozoic or older continental crust during crystal fractionation of andesite parent magmas at crustal levels. The Blackburn Hills field, which consists of medium-K basalt, andesite, and rhyolite intruded by a small granitic pluton, has a large range in initial 87 Sr/ 86 Sr and initial 143 Nd/ 144 Nd that plot in the field for 60 Ma mantle, from near mid-ocean ridge basalts to near “bulk-earth” compositions (initial 87 Sr/ 86 Sr = 0.7033–0.7052; initial 143 Nd/ 144 Nd = 0.51253–0.51290). Andesites and basalts from the Blackburn Hills are divided into two group on the basis of rare earth element (REE) and isotopic composition. Isotopic variation in the more primitive group 1 is best explained by assimilation of the lower crust of the Jurassic to Early Cretaceous Koyukuk terrane by mantle-derived basalts during crystal fractionation, though part of the isotopic variation may be due to metasomatism of an oceanic island basalt type mantle source by fluids derived from subducted sediments. Group 2 andesites from the Blackburn Hills have lower heavy REE abundances and more enriched isotopic compositions. These group 2 andesites and dacites from the Kanuti field, which have ( 87 Sr/ 86 Sr) i = 0.7043–0.7048 and ( 143 Nd/ 144 Nd) i = 0.51248–0.51267, appear to have formed by partial melting of the lower crust of the Koyukuk terrane. The Yukon River field consists of basalt, andesite, dacite, and rhyolite having ( 87 Sr/ 86 Sr) i = 0.7037–0.7051 and ( 143 Nd/ 144 Nd) i = 0.51266–0.51280; its isotopic composition does not require the presence of Paleozoic or older continental crust under the volcanic field and may have formed by interaction between mantle-derived melts and the oceanic Angayucham/Tozitna or island arc Koyukuk terrane. Most of the intrusive rocks and rhyolite domes from the Blackburn Hills volcanic field have ( 87 Sr/ 86 Sr) i = 0.7038–0.7041 and dacites from the Kanuti volcanic field have ( 87 Sr/ 86 Sr) i = 0.7043–0.7048. Thus little or no old continental crust was involved in the genesis of the Late Cretaceous and early Tertiary rocks and therefore probably does not extend beneath this part of the Yukon-Koyukuk province. However, the ultimate source of the small volumes of enriched shoshonitic andesite ( 87 Sr/ 86 Sr = 0.7075, 143 Nd/ 144 Nd = 0.5125) erupted at 118 Ma in the Yukon-Koyukuk province may be continental lithosphere, which may have been thrust under this part of the Yukon-Koyukuk province during arc-continent collision in the Early Cretaceous.

Journal of Geophysical Research Solid Earth↗
USGS2014

Modeling erosion of ice-rich permafrost bluffs along the Alaskan Beaufort Sea coast

The Arctic climate is changing, inducing accelerating retreat of ice-rich permafrost coastal bluffs. Along Alaska’s Beaufort Sea coast, erosion rates have increased roughly threefold from 6.8 to 19 m yr −1 since 1955 while the sea ice-free season has increased roughly twofold from 45 to 100 days since 1979. We develop a numerical model of bluff retreat to assess the relative roles of the length of sea ice-free season, sea level, water temperature, nearshore wavefield, and permafrost temperature in controlling erosion rates in this setting. The model captures the processes of erosion observed in short-term monitoring experiments along the Beaufort Sea coast, including evolution of melt notches, topple of ice wedge-bounded blocks, and degradation of these blocks. Model results agree with time-lapse imagery of bluff evolution and time series of ocean-based instrumentation. Erosion is highly episodic with 40% of erosion is accomplished during less than 5% of the sea ice-free season. Among the formulations of the submarine erosion rate we assessed, we advocate those that employ both water temperature and nearshore wavefield. As high water levels are a prerequisite for erosion, any future changes that increase the frequency with which water levels exceed the base of the bluffs will increase rates of coastal erosion. The certain increases in sea level and potential changes in storminess will both contribute to this effect. As water temperature also influences erosion rates, any further expansion of the sea ice-free season into the midsummer period of greatest insolation is likely to result in an additional increase in coastal retreat rates.

Alaska↗
USGS1996

Along-axis variability in crustal accretion at the Mid-Atlantic Ridge: Results from the OCEAN study

The OCEAN experiment is an integrated geophysical study of a region of the Cape Verde abyssal plain that formed at 140 Ma. Deep seismic reflection and ocean bottom hydrophone (OBH) refraction data were acquired along lines parallel and perpendicular to the paleoridge axis trend identified from a detailed magnetic anomaly survey. The igneous basement is overlain by about 1.3 km of sediment which enables improved imaging of intracrustal structure beyond that possible near the Mid-Atlantic Ridge axis. We describe the results of a 150-km long profile oriented parallel to magnetic anomalies M15 and M16, along which deep seismic reflection data collected by the British Institutions Reflection Profiling Syndicate are complemented by refraction data constrained by four OBHs. The line spans an entire spreading segment between two fracture zones; the northern of which has an offset of 40 km and the other (central) has an offset of only 10 km. Away from the fracture zones, the mean igneous crustal thickness is 7.2 km; near both fracture zones, thinning of up to 4 km is observed, giving a mean igneous crustal thickness over the whole segment of approximately 6.5 km. Differences are seen between the two fracture zones in their seismic velocity structure, in the associated basement topography, and in the presence of a strong reflection extending into the mantle beneath the northern fracture zone. The boundary between oceanic layers 2 and 3 correlates with variably coherent normal incidence reflections and a change in the character of the reflectivity. A number of planar reflections up to 10 km in length are present within the middle and lower crust, dipping outward from beneath low-amplitude basement highs at ∼15°; these appear to be present only within layer 3. The Moho has several expressions in the reflection data, including isolated reflection events, a local increase in reflected amplitudes, and a downward decrease in coherent reflections. At the center of the segment there is a zone at the base of the crust within which both high- and low-velocity materials are present. This zone shows an enhanced level of discontinuous normal incidence reflectivity and may represent an initial fractionation event as melt was emplaced at the spreading ridge.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Rock-forming metals and Pb in modern Alaskan snow

Metal concentrations in annual and subannual increments of snowpack from the accumulation zone of a south central Alaska glacier indicate that the deposition of Pb with and upon snow is decoupled from that of rock dusts. Rock dusts accumulate, apparently as dry deposition, on the topmost, exposed surfaces of snowpacks in spring and summer, whereas Pb does not. Pb concentration is elevated throughout the latest one third of an annual snowpack, whereas that of rock dusts is not. For whole-year snowpacks, there is a generally sympathetic relationship among concentration of Pb, concentration of rock dust, degree of dominance of rock dusts over ocean solutes, and ferromagnesian character of the rock dusts; however, the fractional abundance of Pb in whole year samples may decrease when rock dust masses become large and/or when rock dusts dominate most strongly over salts. The metal suite chosen to characterize rock dusts and to distinguish them from ocean solutes gives detailed information about rock type of dust source areas and about the nature of the degraded rock products that are taken up, transported, and deposited by the atmosphere. Rock dusts are present at concentrations of only about 300 nanograms (ng) of dust per gram of snow in the Alaskan snowpacks. Concentrations of Pb in the Alaska snow samples are moderate, ranging from 0.1 to 0.3 ng Pb/g snow. This contrasts with larger Pb concentrations of 0.4 to 0.9 ng Pb/g snow in whole-year snowpack samples from the Sierra Nevada, California; with similar to smaller concentrations from north and south Greenland of about 0.04 ng Pb/g snow or less, and about 0.2 ng Pb/g snow or less, respectively, and with much smaller concentrations from Antarctica, now believed to range from a minimum of about 0.001 to a maximum of 0.005 (or 0.01) ng Pb/g snow.

Journal of Geophysical Research D: Atmospheres↗
USGS2021

Limited mantle hydration by bending faults at the Middle America Trench

Seismic anisotropy measurements show that upper mantle hydration at the Middle America Trench (MAT) is limited to serpentinization and/or water in fault zones, rather than distributed uniformly. Subduction of hydrated oceanic lithosphere recycles water back into the deep mantle, drives arc volcanism, and affects seismicity at subduction zones. Constraining the extent of upper mantle hydration is an important part of understanding many fundamental processes on Earth. Substantially reduced seismic velocities in tomography suggest that outer rise plate‐bending faults provide a pathway for seawater to rehydrate the slab mantle just prior to subduction. Estimates of outer‐rise hydration based on tomograms vary significantly, with some large enough to imply that, globally, subduction has consumed more than two oceans worth of water during the Phanerozoic. We found that, while the mean upper mantle wavespeed is reduced at the MAT outer rise, the amplitude and orientation of inherited anisotropy are preserved at depths >1 km below the Moho. At shallower depths, relict anisotropy is replaced by slowing in the fault‐normal direction. These observations are incompatible with pervasive hydration but consistent with models of wave propagation through serpentinized fault zones that thin to <100‐m in width at depths >1 km below Moho. Confining hydration to fault zones reduces water storage estimates for the MAT upper mantle from ∼3.5 wt% to <0.9 wt% H 2 0. Since the intermediate thermal structure in the ∼24 Myr‐old MAT slab favors serpentinization, limited hydration suggests that fault mechanics are the limiting factor, not temperatures. Subducting mantle may be similarly dry globally.

Journal of Geophysical Research↗
USGS2020

Water tracks enhance water flow above permafrost in upland Arctic Alaska hillslopes

Upland permafrost regions occupy approximately one third of the Arctic landscape. In upland regions, hydrologic fluxes are influenced by water tracks, curvilinear features on hillslopes that preferentially fill with and route water in response to snowmelt and rainfall when the soil above continuous permafrost thaws in the summer. As continued warming of the Arctic may alter hydrologic cycling leading to increased frequency of extreme hydrologic events like drought and flooding as well as modification of biogeochemical cycling, it is imperative to untangle the interplay between precipitation, runoff, and subsurface flow as water is routed from upland Arctic regions to the Arctic Ocean. This study quantifies how ground surface temperatures affect groundwater discharge from hillslopes with water tracks in the upland Arctic by employing a three-dimensional, physically based subsurface flow model with variable saturation and freeze and thaw capabilities that is calibrated to field measurements from the Upper Kuparuk River watershed on the North Slope of Alaska, USA. Model analysis indicates that higher ground surface temperatures along water track hillslopes promote increases in groundwater discharge where water tracks act as conduits for large recharge events and continue to discharge groundwater into the autumn after the adjacent hillslope has frozen. Simulating the conditions that distinguish water tracks from their hillslope watersheds changes subsurface water storage and ground thermal responses but does not alter the total magnitude of groundwater discharge outside of parameter uncertainty. These findings suggest that water tracks play a complex and critical role in hydrologic cycles of the upland Arctic.

Alaska↗
USGS2012

Morphometric variability within the axial zone of the southern Juan de Fuca Ridge: Interpretation from Sea MARC II, Sea MARC I, and deep-sea photography

The morphometric characteristics of the axial regions of oceanic spreading centers are determined by (1) the type of volcanic flows, (2) the relation between primary volcanic relief (on a scale of a few meters to tens of meters) and degree of sediment cover, and (3) the extent of surficial expression and timing of tectonic disruption of the young oceanic crust. Even within a single, continuous, linear spreading-ridge segment with relatively uniform axial valley dimensions over a distance of 50 or more kilometers, such as along the southern Juan de Fuca Ridge, the changes in morphometric characteristics along axis within the youngest crust indicate distinct variation in tectonic and volcanic activity over short distances within short time periods. An integrated analysis of Sea MARC I, Sea MARC II, and photographic data for the southernmost continuous segment of the Juan de Fuca Ridge shows that generalizations about tectonic and volcanic processes at spreading ridges must consider both the temporal scale of processes as well as the physical scales of observations if predictive models are to be successful. Comparison of the morphometric expression within the major hydrothermal vent area and the rest of the southernmost ridge segment suggests that the mapped distribution of hydrothermal vents may reflect the extent of survey effort rather than uniqueness of geologic setting.

Journal of Geophysical Research B: Solid Earth↗
USGS2006

Submarine geology of Hana Ridge and Haleakala Volcano's northeast flank, Maui

We present a morphostructural analysis of the submarine portions of Haleakala Volcano and environs, based upon a 4-year program of geophysical surveys and submersible explorations of the underwater flanks of Hawaiian volcanoes that was conducted by numerous academic and governmental research organizations in Japan and the U.S. and funded primarily by the Japan Agency for Marine–Earth Science and Technology. A resulting reconnaissance geologic map features the 135-km-long Hana Ridge, the 3000 km 2 Hana slump on the volcano's northeast flank, and island-surrounding terraces that are the submerged parts of volcanic shields. Hana Ridge below 2000 m water depth exhibits the lobate morphology typical of the subaqueously erupted parts of Hawaiian rift zones, with some important distinctions: namely, subparallel crestlines, which we propose result from the down-rift migration of offsets in the dike intrusion zone, and an amphitheater at its distal toe, where a submarine landslide has embayed the ridge tip. Deformation of Haleakala's northeast flank is limited to that part identified as the Hana slump, which lies downslope from the volcano's submerged shield, indicating that flank mobility is also limited in plan, inconsistent with hypothesized volcanic spreading driven by rift-zone dilation. The leading edge of the slump has transverse basins and ridges that resemble the thrust ramps of accretionary prisms, and we present a model to describe the slump's development that emphasizes the role of coastally generated fragmental basalt on gravitational instability of Haleakala's northeast flank and that may be broadly applicable to other ocean-island slumps.

Hawai'i↗