Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Hydrogeology Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
USGS1998

Numerical analysis of the hydrogeologic controls in a layered coastal aquifer system, Oahu, Hawaii, USA

The coastal aquifer system of southern Oahu, Hawaii, USA, consists of highly permeable volcanic aquifers overlain by weathered volcanic rocks and interbedded marine and terrestrial sediments of both high and low permeability. The weathered volcanic rocks and sediments are collectively known as caprock, because they impede the free discharge of groundwater from the underlying volcanic aquifers. A cross-sectional groundwater flow and transport model was used to evaluate the hydrogeologic controls on the regional flow system in southwestern Oahu. Controls considered were: (a) overall caprock hydraulic conductivity; and (b) stratigraphic variations of hydraulic conductivity in the caprock. Within the caprock, variations in hydraulic conductivity, caused by stratigraphy or discontinuities of the stratigraphic units, are a major control on the direction of groundwater flow and the distribution of water levels and salinity. Results of cross-sectional modeling confirm the general groundwater flow pattern that would be expected in a layered coastal system. Groundwater flow is: (a) predominantly upward in the low-permeability sedimentary units; and (b) predominantly horizontal in the high-permeability sedimentary units.

Hydrogeology Journal↗
USGS1998

Causes of sinks near Tucson, Arizona, USA

Land subsidence in the form of sinks has occurred on and near farmlands near Tucson, Pima County, Arizona, USA. The sinks occur in alluvial deposits along the flood plain of the Santa Cruz River, and have made farmlands dangerous and unsuitable for farming. More than 1700 sinks are confined to the flood plain of the Santa Cruz River and are grouped along two north-northwestward-trending bands that are approximately parallel to the river and other flood-plain drainages. An estimated 17,000 m 3 of sediment have been removed in the formation of the sinks. Thirteen trenches were dug to depths of 4–6 m to characterize near-surface sediments in sink and nonsink areas. Sediments below about 2 m included a large percentage of dispersive clays in sink areas. Sediments in nonsink areas contain a large component of medium- to coarse-grained, moderately to well sorted sand that probably fills a paleochannel. Electromagnetic surveys support the association of silts and clays in sink areas that are highly electrically conductive relative to sand in nonsink areas. Sinks probably are caused by the near-surface process of subsurface erosion of dispersive sediments along pre-existing cracks in predominantly silt and clay sediments. The pre-existing cracks probably result from desiccation or tension that developed during periods of water-table decline and channel incision during the past 100 years or in earlier periods.

Hydrogeology Journal↗
USGS1998

Estimation of the depth to the fresh-water/salt-water interface from vertical head gradients in wells in coastal and island aquifers

An accurate estimate of the depth to the theoretical interface between fresh, water and salt water is critical to estimates of well yields in coastal and island aquifers. The Ghyben–Herzberg relation, which is commonly used to estimate interface depth, can greatly underestimate or overestimate the fresh-water thickness, because it assumes no vertical head gradients and no vertical flow. Estimation of the interface depth needs to consider the vertical head gradients and aquifer anisotropy that may be present. This paper presents a method to calculate vertical head gradients using water-level measurements made during drilling of a partially penetrating well; the gradient is then used to estimate interface depth. Application of the method to a numerically simulated fresh-water/salt-water system shows that the method is most accurate when the gradient is measured in a deeply penetrating well. Even using a shallow well, the method more accurately estimates the interface position than does the Ghyben–Herzberg relation where substantial vertical head gradients exist. Application of the method to field data shows that drilling, collection methods of water-level data, and aquifer inhomogeneities can cause difficulties, but the effects of these difficulties can be minimized.

Hydrogeology Journal↗
USGS1998

Depth of the base of the Jackson aquifer, based on geophysical exploration, southern Jackson Hole, Wyoming, USA

A geophysical survey was conducted to determine the depth of the base of the water-table aquifer in the southern part of Jackson Hole, Wyoming, USA. Audio-magnetotellurics (AMT) measurements at 77 sites in the study area yielded electrical-resistivity logs of the subsurface, and these were used to infer lithologic changes with depth. A 100–600 ohm-m geoelectric layer, designated the Jackson aquifer, was used to represent surficial saturated, unconsolidated deposits of Quaternary age. The median depth of the base of the Jackson aquifer is estimated to be 200 ft (61 m), based on 62 sites that had sufficient resistivity data. AMT-measured values were kriged to predict the depth to the base of the aquifer throughout the southern part of Jackson Hole. Contour maps of the kriging predictions indicate that the depth of the base of the Jackson aquifer is shallow in the central part of the study area near the East and West Gros Ventre Buttes, deeper in the west near the Teton fault system, and shallow at the southern edge of Jackson Hole. Predicted, contoured depths range from 100 ft (30 m) in the south, near the confluences of Spring Creek and Flat Creek with the Snake River, to 700 ft (210 m) in the west, near the town of Wilson, Wyoming.

Wyoming↗
USGS1999

Relation of streams, lakes, and wetlands to groundwater flow systems

Surface-water bodies are integral parts of groundwater flow systems. Groundwater interacts with surface water in nearly all landscapes, ranging from small streams, lakes, and wetlands in headwater areas to major river valleys and seacoasts. Although it generally is assumed that topographically high areas are groundwater recharge areas and topographically low areas are groundwater discharge areas, this is true primarily for regional flow systems. The superposition of local flow systems associated with surface-water bodies on this regional framework results in complex interactions between groundwater and surface water in all landscapes, regardless of regional topographic position. Hydrologic processes associated with the surface-water bodies themselves, such as seasonally high surface-water levels and evaporation and transpiration of groundwater from around the perimeter of surface-water bodies, are a major cause of the complex and seasonally dynamic groundwater flow fields associated with surface water. These processes have been documented at research sites in glacial, dune, coastal, mantled karst, and riverine terrains.

Hydrogeology Journal↗
USGS1999

Hydrochemical evidence for mixing of river water and groundwater during high-flow conditions, lower Suwannee River basin, Florida, USA

Karstic aquifers are highly susceptible to rapid infiltration of river water, particularly during periods of high flow. Following a period of sustained rainfall in the Suwannee River basin, Florida, USA, the stage of the Suwannee River rose from 3.0 to 5.88 m above mean sea level in April 1996 and discharge peaked at 360 m 3 /s. During these high-flow conditions, water from the Suwannee River migrated directly into the karstic Upper Floridan aquifer, the main source of water supply for the area. Changes in the chemical composition of groundwater were quantified using naturally occurring geochemical tracers and mass-balance modeling techniques. Mixing of river water with groundwater was indicated by a decrease in the concentrations of calcium, silica, and 222 Rn; and by an increase in dissolved organic carbon (DOC), tannic acid, and chloride, compared to low-flow conditions in water from a nearby monitoring well, Wingate Sink, and Little River Springs. The proportion (fraction) of river water in groundwater ranged from 0.13 to 0.65 at Wingate Sink and from 0.5 to 0.99 at well W-17258, based on binary mixing models using various tracers. The effectiveness of a natural tracer in quantifying mixing of river water and groundwater was related to differences in tracer concentration of the two end members and how conservatively the tracer reacted in the mixed water. Solutes with similar concentrations in the two end-member waters (Na, Mg, K, Cl, SO 4 , SiO 2 ) were not as effective tracers for quantifying mixing of river water and groundwater as those with larger differences in end-member concentrations (Ca, tannic acid, DOC, 222 Rn, HCO 3 ).

Hydrogeology Journal↗
USGS2002

The potential for free and mixed convection in sedimentary basins

Free thermal convection and mixed convection are considered as potential mechanisms for mass and heat transport in sedimentary basins. Mixed convection occurs when horizontal flows (forced convection) are superimposed on thermally driven flows. In cross section, mixed convection is characterized by convection cells that migrate laterally in the direction of forced convective flow. Two-dimensional finite-element simulations of variable-density groundwater flow and heat transport in a horizontal porous layer were performed to determine critical mean Rayleigh numbers for the onset of free convection, using both isothermal and semi-conductive boundaries. Additional simulations imposed a varying lateral fluid flux on the free-convection pattern. Results from these experiments indicate that forced convection becomes dominant, completely eliminating buoyancy-driven circulation, when the total forced-convection fluid flux exceeds the total flux possible due to free convection. Calculations of the thermal rock alteration index (RAI=q·∇T) delineate the patterns of potential diagenesis produced by fluid movement through temperature gradients. Free convection produces a distinct pattern of alternating positive and negative RAIs, whereas mixed convection produces a simpler layering of positive and negative values and in general less diagenetic alteration.

Hydrogeology Journal↗
USGS2012

Using borehole flow logging to optimize hydraulic-test procedures in heterogeneous fractured aquifers

Hydraulic properties of heterogeneous fractured aquifers are difficult to characterize, and such characterization usually requires equipment-intensive and time-consuming applications of hydraulic testing in situ. Conventional coring and geophysical logging techniques provide useful and reliable information on the distribution of bedding planes, fractures and solution openings along boreholes, but it is often unclear how these locally permeable features are organized into larger-scale zones of hydraulic conductivity. New boreholes flow-logging equipment provides techniques designed to identify hydraulically active fractures intersecting boreholes, and to indicate how these fractures might be connected to larger-scale flow paths in the surrounding aquifer. Potential complications in interpreting flowmeter logs include: 1) Ambient hydraulic conditions that mask the detection of hydraulically active fractures; 2) Inability to maintain quasi-steady drawdowns during aquifer tests, which causes temporal variations in flow intensity to be confused with inflows during pumping; and 3) Effects of uncontrolled background variations in hydraulic head, which also complicate the interpretation of inflows during aquifer tests. Application of these techniques is illustrated by the analysis of cross-borehole flowmeter data from an array of four bedrock boreholes in granitic schist at the Mirror Lake, New Hampshire, research site. Only two days of field operations were required to unambiguously identify the few fractures or fracture zones that contribute most inflow to boreholes in the CO borehole array during pumping. Such information was critical in the interpretation of water-quality data. This information also permitted the setting of the available string of two packers in each borehole so as to return the aquifer as close to pre-drilling conditions as possible with the available equipment.

Hydrogeology Journal↗
USGS2012

American hydrogeology at the millennium: An annotated chronology of 100 most influential papers

Hydrogeology developed as scientists undertook activities to describe how a groundwater system functions to explain why it is that way, in order to solve practical problems of water supply. This paper demonstrates the evolutionary nature and growth of hydrogeology in the United States on the basis of a selection of one hundred papers that had a significant impact on subsequent activities. We have identified three revolutionary concepts that resulted directly from this evolutionary understanding and have selected papers that demonstrate important consequences. These three concepts are 1) that the mathematical expression for heat flow can be paraphrased for groundwater and used in transient flow conditions to determine aquifer characteristics; 2) that the distribution of fluid potential can be formulated in mathematical equations suitable for solution by various analytical techniques; and 3) that chemical thermodynamics can be applied to hydrogeologic systems in order to understand the processes controlling the chemical character of groundwater. One purpose of this paper is to encourage scientists to gain an additional dimension of satisfaction from their work by being aware of the contributions of those who went before them and to see how their own work fits into the current understanding of hydrogeology.

Hydrogeology Journal↗
USGS2014

Identifying variably saturated water-flow patterns in a steep hillslope under intermittent heavy rainfall

The objective of this paper is to identify water-flow patterns in part of an active landslide, through the use of numerical simulations and data obtained during a field study. The approaches adopted include measuring rainfall events and pore-pressure responses in both saturated and unsaturated soils at the site. To account for soil variability, the Richards equation is solved within deterministic and stochastic frameworks. The deterministic simulations considered average water-retention data, adjusted retention data to account for stones or cobbles, retention functions for a heterogeneous pore structure, and continuous retention functions for preferential flow. The stochastic simulations applied the Monte Carlo approach which considers statistical distribution and autocorrelation of the saturated conductivity and its cross correlation with the retention function. Although none of the models is capable of accurately predicting field measurements, appreciable improvement in accuracy was attained using stochastic, preferential flow, and heterogeneous pore-structure models. For the current study, continuum-flow models provide reasonable accuracy for practical purposes, although they are expected to be less accurate than multi-domain preferential flow models.

Hydrogeology Journal↗
USGS2001

Hydrology of the coastal sabkhas of Abu Dhabi, United Arab Emirates

Water fluxes were estimated and a water budget developed for the land surface and a surficial 10-m-deep section of the coastal sabkhas that extend from the city of Abu Dhabi, United Arab Emirates, west to the border with Saudi Arabia. The fluxes were estimated on the basis of water levels and hydraulic conductivities measured in wells and evaporation rates measured with a humidity chamber. In contrast with conceptual models proposed in earlier studies, groundwater inflow is estimated to be small, whereas the largest components of the water budget are recharge from rainfall and evaporation from the water table. Estimates within a rectilinear volume of sabkha, defined as 1 m wide by 10 km long by 10 m deep, indicate that about 1 m 3 /year of water enters and exits by lateral groundwater flow; 40–50 m 3 /year enters by upward leakage; and 640 m 3 /year enters by recharge from rainfall. Based on the water and solute fluxes estimated for the upward leakage into the sabkha, 7–8 pore volumes of brine have entered the sabkha from below since the time the sabkha became saturated (7,000 years ago) as a result of the last global sea-level rise.

Abu Dhabi↗
USGS2001

Factors controlling the configuration of the fresh-saline water interface in the Dead Sea coastal aquifers: Synthesis of TDEM surveys and numerical groundwater modeling

TDEM (time domain electromagnetic) traverses in the Dead Sea (DS) coastal aquifer help to delineate the configuration of the interrelated fresh-water and brine bodies and the interface in between. A good linear correlation exists between the logarithm of TDEM resistivity and the chloride concentration of groundwater, mostly in the higher salinity range, close to that of the DS brine. In this range, salinity is the most important factor controlling resistivity. The configuration of the fresh-saline water interface is dictated by the hydraulic gradient, which is controlled by a number of hydrological factors. Three types of irregularities in the configuration of fresh-water and saline-water bodies were observed in the study area: 1. Fresh-water aquifers underlying more saline ones ("Reversal") in a multi-aquifer system. 2. "Reversal" and irregular residual saline-water bodies related to historical, frequently fluctuating DS base level and respective interfaces, which have not undergone complete flushing. A rough estimate of flushing rates may be obtained based on knowledge of the above fluctuations. The occurrence of salt beds is also a factor affecting the interface configuration. 3. The interface steepens towards and adjacent to the DS Rift fault zone. Simulation analysis with a numerical, variable-density flow model, using the US Geological Survey's SUTRA code, indicates that interface steep- ening may result from a steep water-level gradient across the zone, possibly due to a low hydraulic conductivity in the immediate vicinity of the fault.

Hydrogeology Journal↗
USGS2001

Results from the Big Spring basin water quality monitoring and demonstration projects, Iowa, USA

Agricultural practices, hydrology, and water quality of the 267-km2 Big Spring groundwater drainage basin in Clayton County, Iowa, have been monitored since 1981. Land use is agricultural; nitrate-nitrogen (-N) and herbicides are the resulting contaminants in groundwater and surface water. Ordovician Galena Group carbonate rocks comprise the main aquifer in the basin. Recharge to this karstic aquifer is by infiltration, augmented by sinkhole-captured runoff. Groundwater is discharged at Big Spring, where quantity and quality of the discharge are monitored. Monitoring has shown a threefold increase in groundwater nitrate-N concentrations from the 1960s to the early 1980s. The nitrate-N discharged from the basin typically is equivalent to over one-third of the nitrogen fertilizer applied, with larger losses during wetter years. Atrazine is present in groundwater all year; however, contaminant concentrations in the groundwater respond directly to recharge events, and unique chemical signatures of infiltration versus runoff recharge are detectable in the discharge from Big Spring. Education and demonstration efforts have reduced nitrogen fertilizer application rates by one-third since 1981. Relating declines in nitrate and pesticide concentrations to inputs of nitrogen fertilizer and pesticides at Big Spring is problematic. Annual recharge has varied five-fold during monitoring, overshadowing any water-quality improvements resulting from incrementally decreased inputs. ?? Springer-Verlag 2001.

Hydrogeology Journal↗
USGS2001

Use of deuterated water as a conservative artificial ground water tracer

Conservative tracers are necessary to obtain groundwater transport velocities at the field scale. Deuterated water is an effective tracer for this purpose due to its similarity to water, chemical stability, non-reactivity, ease of handling and sampling, relatively neutral buoyancy, and reasonable price. Reliable detection limits of 0.1 mg deuterium/L may be obtained in field tests. A field example is presented in which deuterated water, bromide, and pentafluorobenzoic acid are used as groundwater tracers. Deuterated water appeared to be transported conservatively, producing almost identical breakthrough curves as that of other soluble tracers. ?? Springer-Verlag 2001.

Hydrogeology Journal↗
USGS2010

Simulated impacts of artificial groundwater recharge and discharge of the source area and source volume of an Atlantic Coastal Plain Stream, Delaware, USA

A numerical groundwater-flow model was used to characterize the source area and volume of Phillips Branch, a baseflow-dominated stream incising a highly permeable unconfined aquifer on the low relief Delmarva Peninsula, USA. Particle-tracking analyses indicate that the source area (5.51 km 2 ) is ~20% smaller than the topographically defined watershed (6.85 km 2 ), and recharge entering ~37% of the surface watershed does not discharge to Phillips Branch. Groundwater residence time within the source volume ranges from a few days to almost 100 years, with 95% of the volume "flushing" within 50 years. Artificial discharge from groundwater pumping alters the shape of the source area and reduces baseflow due to the interception of stream flow paths, but has limited impacts on the residence time of groundwater discharged as baseflow. In contrast, artificial recharge from land-based wastewater disposal substantially reduces the source area, lowers the range in residence time due to the elimination of older flow paths to the stream, and leads to increased discharge to adjacent surface-water bodies. This research suggests that, in this and similar hydrogeologic settings, the "watershed" approach to water-resource management may be limited, particularly where anthropogenic stresses alter the transport of soluble contaminants through highly permeable unconfined aquifers.

Delaware↗
USGS1962

Controlled induced recharge tests at Kalamazoo, Mich

This article discusses the results of a controlled field testing program, which indicated that definite hydraulic and other advantages may be gained from induced recharging as practiced at Kalamazoo, Michigan. Results include the following: water levels and artesian pressures can be maintained at high stages, the results are lower pumping lifts and substantial reductions in the amount of power used for pumping; the high water levels permit increased rates of withdrawal during periods of peak demand; encroachment of poor quality water from other aquifers is minimized; the surface water induced into the aquifer is filtered naturally through great thicknesses of earth materials; natural underground storage is used to conserve and protect water, which otherwise would flow largely to waste; and, significant supplemental benefits, including flood control, have been derived. The tests demonstrated that it is possible to manipulate the regimen of a complex hydrologic system for definite hydraulic benefits with predictable results. Furthermore with current methods, quantitative evaluations may be made of the effects of induced recharge. The results of the tests, therefore, are applicable in other areas of similar hydrogeologic environments.

Michigan↗
USGS2022

Debris flows originating from soil slips during rainstorms in Southern California

Debris flows generated during rainstorms present a greater risk of death and injury to southern California residents than all other kinds of slope failure combined. During the years 1962-1971, twenty-three people in the greater Los Angeles area died from being buried or struck by debris flows, all of which probably originated as soil slips. Soil slips and debris flows are recurring major natural geomorphological processes in the region. Soil slips are reconstituted into debris flows when the initial movement (sliding failure) of slabs of soil and wedges of ravine fill causes remoulding of the saturated moving mass into viscous, debris-laden mud, which then flows down available drainage courses. This change of state results in a marked reduction in resistance to shear, permitting masses to accelerate down the same slopes on which, only moments earlier, the slabs of soil mantle had barely overcome the resistance to sliding. Many flows reach avalanche speeds and do not begin to deposit significant amounts of detritus until they reach lower gradients far from their sources. The deposits form steep ‘alluvial’ fans at the mouths of short, steep drainage basins tributary to broad valleys, and form debris trains in and along narrow trunk canyons below the mouths of short, steep tributaries. The exceptional storm period of January 18th to 26th, 1969, was accompanied by thousands of soil slips and provided an unusual opportunity to determine the times of occurrence of numerous debris flows, establish their origin from soil slips, and compare the times of those events with rainfall records from an extensive network of continuously recording rain gauges and a sequential set of radar weather maps. An empirical association between soil slips and rainfall suggests that a 10 inch antecedent rainfall is required to bring most of the colluvial soil of the area to field capacity, and 0.25 inch-per-hour is the minimum rate at which surface infiltration exceeds subsoil drainage for most of the colluvial soils of the area so that pore pressures are raised in a zone above the less permeable parent materials. Soil moisture of this level also appears to be sufficient so that most of the colluvial soils of the area will become at least partly liquid when disturbed. GeoRef Subject

California↗
USGS2022

Spring mudflows at Wrightwood, Southern California

The Wrightwood area in the San Gabriel Mountains of southern California is known as a site of recurring mudflow activity. The community of Wrightwood is built on the coalesced fans of Sheep, Acorn and Heath Creeks, and the fan deposits are probably chiefly of mudflow origin. Historically, mudflows there have been observed in association with three climatic conditions: (1) short period of high-intensity rainfall during the summer dry season (thunderstorms); (2) periods of heavy rainfall during the October-March winter season, when most of the year's rain and snow fall; and (3) thaw of the winter snow pack. The mudflow activity associated with heavy rainfall has generally been of only a few hours or at most a few days duration. Mudflow activity associated with spring thaw has been of longer duration, as much as several weeks. At various times in the past, mudflows generated by all three conditions have inundated homes and highways in the Wrightwood area, which is now defended by a flood control levee system. During May and June, 1969 the rapid melting of a heavy snow pack resulted in a 40-day period of mudflow activity in Heath Creek. All flows originated in the steep upper reaches of Heath Creek, where steep ravines are incised in the toe of a large active landslide. Direct observation by the authors showed that flows formed when small masses of debris fell or slid from the surface of the landslide mass into the steep channel. Some of the masses were fluid enough to continue downstream without interruption; others stopped in the channel until remobilized by added melt water or the passage of a mudflow from a higher altitude. Both processes resulted in discrete ‘slugs’ which continued down the steep ravine, through an allu-viated canyon, to a fan where most of the debris was deposited. The activity may be described as a spring mudflow cycle, within which three stages were observed in a gradational sequence. A waxing stage began with sporadic short-duration mudflows, during which the lower alluviated canyon floor of Heath Creek was aggraded. A climactic stage of larger mudflows at more frequent intervals and of longer duration was characterized by the incision of a single, narrow, U-shaped channel in the alluviated canyon floor, and transportation of debris as much as 2 miles (3.2 km) from the source. A waning stage followed as meltwater supply decreased; short-duration flows backfilled the U-shaped channel and spilled over the banks, again aggrading the alluviated canyon floor.

California↗