Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Economic Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

229 records · Page 11Linked to original sources
USGS2024

Geologic map of Scoggins Dam, Henry Hagg Lake, and Scoggins Valley, Washington County, Oregon

New geologic mapping (Wells and others, 2020b) and geophysical mapping (Blakely and others, 2000; McPhee and others, 2014; Wells and others, 2020a) document kilometers of Cenozoic right-lateral offset along the Gales Creek Fault Zone, a major, northwest-striking fault zone forming the boundary between the Tualatin Valley and the Coast Range. The Bureau of Reclamation’s (Reclamation) Scoggins Dam (fig. 1), in the Coast Range foothills west of Forest Grove, Oregon, lies within the Gales Creek Fault Zone as mapped by Wells and others (2020a, 2020b; fig. 2). Active faults of the Gales Creek Fault Zone defined by paleoseismic trenching (Redwine and others, 2017, 2019b, Horst and others, 2018, 2019, 2021, and Wells and others, 2020a) are presently mapped as projecting through the existing dam. The Pacific Northwest Region of Reclamation requested assistance with geologic studies around Scoggins Dam to provide better understanding of fault locations and their activity, which are needed to design a modification of the dam (Maguire, 2019a, b). The scope of this project includes detailed geology of the existing Scoggins Dam site, Henry Hagg Lake, the reservoir behind the dam, and Scoggins Valley downstream of the existing dam, particularly around a potential new dam site, where Scoggins Creek cuts through a narrow gap formed by a resistant felsic tuff bed that crosses the valley.

Oregon↗
USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗
USGS2026

Decadal-scale characteristics of natural and anthropogenic dune morphology along North Carolina Barrier Islands (SE Atlantic Coast)

Dunes offer protection to coastal communities from storms, yet quantitative research characterizing human influences on dune systems across decades and 10–100 km spatial scales constitutes a known data gap. This study analyzed a multidecadal archive of dune crest elevations and positions to map mesoscale spatiotemporal trends in foredune morphology across the barrier island coastline of North Carolina, SE Atlantic coast. Results are summarized within four categories of coastline representing a range of coastal management intensities, integrating beach width and dune lateral accommodation space to assess the comparative influence of differing intensities of anthropogenic intervention on dune morphology. These categories account for the presence of structures, roads, and alongshore connectivity to anthropogenic sediment sources (beach nourishment). These categories show distinct dune and beach system characteristics. Dunes are largest in the areas with the longest legacy of coastal management. As categories decrease in development intensity, dune and beach system characteristics generally depart from the large, static dunes and narrow beaches consistent with hold-the-line management. Where small or transgressive dunes exist on heavily developed coasts, they coincide with relatively strong hydrodynamic forcing or sediment-limiting geology. There is evidence of indirect coastal management influence on undeveloped barrier islands with alongshore connectivity to developed barriers. While this analysis was conducted at the mesoscale, the results provide researchers with the framework to make insights at smaller scales than those demonstrated in this study.

North Carolina↗
USGS2026

Revisiting the utility of regional-scale, high-quality geophysical data in mineral exploration - A case study featuring the Mammoth Magnetic Anomaly, Pinal County, Arizona

Regional aeromagnetic surveys passively measure the total magnetic intensity (TMI) and are a foundational tool used in mineral exploration (Airo, 2015). With the increased global demand and the number of critical mineral resources required for manufacturing high-tech devices, developing high-quality, regional-scale geophysical surveys could aid critical mineral exploration efforts and geologic mapping. In 2019, the U. S. Geological Survey launched the Earth Mapping Resources Initiative (Earth MRI) to modernize the geologic and geophysical mapping of regions that have the potential to contain critical mineral resources within the United States. In support of planning Earth MRI geophysical surveys, Drenth and Grauch (2019) defined five aeromagnetic data quality rankings (rank 1 through rank 5) applying them to the airborne geophysical survey inventory of the United States (Johnson et al., 2021). Rank 1 aeromagnetic surveys are of the highest quality, meeting modern standards and allowing best practices for qualitative and quantitative interpretation; whereas rank 5 aeromagnetic surveys are of the lowest quality, being useful only for qualitative interpretation of broad features. Through the Earth MRI effort, 48 high-quality, regional-scale rank 1 and 2 airborne magnetic and radiometric geophysical surveys have been planned, collected, or publicly release through May 2025 (U. S. Geological Survey, 2025). Here, a portion of a rank 1 Earth MRI aeromagnetic survey in southeast Arizona is presented and compared to a legacy rank 5 aeromagnetic survey over the Mammoth Magnetic Anomaly (MMA), demonstrating how modern, high-quality aeromagnetic data improves our view of crustal geology, aiding mineral exploration.

Arizona↗
USGS2024

Conceptual hydrogeologic framework and groundwater budget near the southeastern part of Puget Sound, Washington

More than 1 million people live within the active model area (AMA) in the southeastern part of the lowlands surrounding Puget Sound, or Puget Lowland, Washington, and groundwater is the source for approximately one-half of their public, domestic, and irrigation water demands. The 887-square-mile AMA, located in King and Pierce Counties, represents the area of analysis for the conceptual hydrogeologic framework and numerical groundwater-flow models within the study area and includes the Puyallup River and Chambers-Clover Creek watersheds. To assess the potential hydrologic and anthropogenic impacts to groundwater and the connected surface-water resources, conceptual and numerical groundwater-flow models of groundwater flow were developed by the U.S. Geological Survey Washington Water Science Center in close cooperation with 18 water-resource agencies and stakeholders. This report presents information used to characterize the groundwater-flow system and the development of a numerical model in the AMA. Included are descriptions of the geology and conceptual hydrogeologic framework, groundwater levels and flow directions, groundwater recharge and discharge, numerical groundwater-flow model construction and results, and model limitations. The study area encompasses the western part of Pierce County and the southwestern part of King County, Washington. The study area extends south to the Nisqually River, southwest to Tanwax Creek, northeast to the Green River, and north through the valley near Auburn and adjacent uplands. It is bounded on the east by foothills of the Cascade Range, and on the northwest by Puget Sound.

Washington↗
USGS2024

Using surficial geologic maps, vegetation, and monitoring to address erosion impacts from grazing in Channel Islands National Park, California

Employing a map-unit classification scheme based on geomorphic process and age, the U.S. Geological Survey (USGS) mapped Quaternary surficial deposits of the five islands comprising Channel Islands National Park (CHIS), California, as no such maps previously existed. Mapping was motivated through an agreement with the National Park Service (NPS) to aid natural resource assessments, including post-grazing disturbance recovery and identification of mass wasting and tectonic hazards. The resulting detailed (1:12,000 scale) maps portray areas of upland erosional transport processes and alluvial, fluvial, eolian, beach, marine terrace, mass wasting, and mixed depositional processes at a scale commensurate with the process signal on the landscape. Detailed, GPS-located observations of sedimentology, pedogenic development, landscape position, and geomorphology constrain map unit identification. In addition, map-unit boundary delineation was determined in a GIS using a variety of high-resolution (sub-meter) aerial imagery and lidar-based DEMs complemented by derivative raster products. The GIS geodatabase schema used is GeMS compliant. Resolvable map-unit widths are as small as 10-15 meter. Locational accuracy of unit boundaries is estimated to be as low as 10 m or better. Detailed mapping is at a scale allowing determination of geomorphic transport processes operating on the landscape and conveys geologic information to land managers at a resolution commensurate with park resources. Map unit ages are constrained by relative soil chronostratigraphy, vertebrate and invertebrate fossils, and materials collected for dating control using radiogenic, luminescence, and cosmogenic radionuclide techniques. Associated topical studies examined connections between geology, surface water, and vegetation distribution and restoration.

California↗
USGS2025

Three-dimensional seismic velocity models for the San Francisco Bay region, California from joint body-wave and surface-wave tomography validated by waveform simulation

A high-resolution seismic velocity model for both P and S waves is essential for the San Francisco Bay (SFB) region to accurately simulate earthquake ground motions and assess seismic hazards in this high-risk region. We present new three-dimensional P-wave and S-wave velocity (Vp and Vs) models of the SFB region developed using joint tomographic inversion with a rich set of earthquake and active-source body-wave data and ambient-noise surface-wave data. We designed a dynamic balance strategy to effectively balance the contributions of body-wave and surface-wave data during each iteration of the inversion. Owing to the complementary resolution of body-wave and surface-wave data, our new models are significantly improved compared to previous tomographic models. Major geologic features in the SFB region, including low-velocity basins, high-velocity Franciscan Complex, granite, and gabbro rocks, and across-fault velocity contrasts, are imaged in our Vp and Vs models. Compared to the geology-based U.S. Geological Survey velocity model, our new model has better defined structures for some important areas that are of great concern for seismic hazard assessment, such as the Sacramento-San Joaquin Delta, and the 2014 magnitude 6.0 South Napa earthquake area. We validated our model by simulating waveforms for a set of moderate-magnitude earthquakes. The good performance of our model in waveform simulation indicates its potential for improving ground motion simulation and seismic hazard assessment in the SFB region.

California↗
USGS2025

To heal or not to heal?: 1. The effect of pore fluid pressure on the frictional healing behavior of lithologies in Oklahoma

The competition between fault healing (i.e., re-strengthening) and fault loading determines the timing and magnitude of fault failure within the seismic cycle. Repeating earthquakes can give observational estimates of fault healing rates, however, it is difficult to link laboratory studies of frictional healing and observed healing rates from repeating earthquakes in part because of uncertainty in lithology at depth. Due to well-constrained and relatively simple geology, earthquakes in Oklahoma can be linked to the granitic basement rock and to the Arbuckle Group, which is primarily composed of dolomite at earthquake depths. Here, we conduct friction experiments to measure healing rates of the two earthquake-bearing lithologies at confining pressures representative of earthquake depths and pore pressures ranging from 0% to 80% of the confining pressure. We measure frictional healing by executing slide-hold-slide tests with hold times ranging from 3 s to 3000 s. The friction experiments on the Troy Granite indicate that pore fluid pressure does not greatly affect healing rate. On the other hand, the dolomite of the Arbuckle Group exhibits decreased healing with increased pore fluid pressure, with weakening at the highest pore pressure. We hypothesize that this is due to an increase in dissolution of dolomite at high pore pressures/low effective normal stress. These healing rates are used in the companion paper to understand the moment-recurrence time behavior of repeating earthquakes in Prague, Oklahoma. This work has implications for possible enhanced dissolution and weakening behavior of the Arbuckle Group during wastewater injection activities.

Oklahoma↗
USGS2024

Prioritizing US Geological Survey science on salinization and salinity in candidate and selected priority river basins

The US Geological Survey (USGS) is selecting and prioritizing basins, known as Integrated Water Science basins, for monitoring and intensive study. Previous efforts to aid in this selection process include a scientifically defensible and quantitative assessment of basins facing human-caused water resource challenges (Van Metre et al. in Environmental Monitoring and Assessment , 192(7), 458 2020). In the present work, we explore this ranking process based on water quality considerations, specifically salinity and salinization. We selected top candidate basins to study salinity and salinization issues in 18 hydrologic regions that include 163 candidate basins. Our prioritization is based on quantitative assessment of sources of salinity, drivers of change, and receptors that must respond to those sources and drivers. Source terms represented in the prioritization include geology, depth to brackish groundwater, stream conductivity, chloride in precipitation, urban and agricultural land use, application of road salt as a deicer, and irrigation. Drivers represented in prioritization include changes in chemical weathering as a result of changes in rainwater chemistry. Receptors include measures of water stress, measurements of stream ecological health, and socioeconomic factors. In addition, we present research activities for the USGS on salinity and salinization that can be pursued in these basins including assessment of sources, pathways, and loadings; predicting and understanding changes in sources, peaks, and trends; understanding the components of salinity and mobilization of contaminants; understanding the relationship between salinization and changing ecosystems; and developing knowledge on the causes and distribution of groundwater salinity, brackish water resources, and challenges related to desalination.

Enviornmental Monitoring and Assessment↗
USGS2024

Site response in the Walnut Creek–Concord region of the San Francisco Bay, California: Ground motion amplification in a fault-bounded basin

Thirty‐seven portable accelerometers were deployed in the eastern San Francisco Bay communities of Walnut Creek and Concord to study site response in a fault‐bounded, urban, sedimentary basin. Local earthquakes were recorded for a period of two years from 2017 to 2019 resulting in 101 well‐recorded events. Site response is estimated by two methods: the reference site spectral ratio method and a source‐site spectral inversion method. The reference site spectral ratio method allows investigation of the variability of site amplification with source azimuth and frequency. The source‐site spectral inversion method yields the best least‐squares fit to site response for a database of ground‐motion records. Both methods show substantial amplification in the Walnut Creek–Concord basin below 2 Hz indicating strong surface‐wave development. Greater amplification is seen for sources aligned along the long axis of the basin. Inversion using close‐in sources at short distances yields lower amplification at longer periods than the entire data set due to reduced surface‐wave generation for steeper angles of incidence. Inversion of site response spectra for shallow shear‐wave velocity using a global search algorithm yields V S30 values consistent with generalized mapping results based on geology and topography but with greater variability due to local site variations. 3D finite‐element modeling shows greater amplification in the Walnut Creek–Concord basin with a basin‐edge effect likely contributing to higher ground motions. Topography is also seen to lead to increased scattering and shadowing effects.

California↗
USGS2025

Estimation of the accessible and useful resource base for electric-grade enhanced geothermal systems (EGS) resources of the Great Basin, USA

Scientists with the U.S. Geological Survey (USGS) recently completed a provisional assessment of the electric-grade geothermal resources associated with the low-permeability geologic formations of the Great Basin, USA, where resources are assumed to be accessible using enhanced geothermal systems (EGS) technologies (i.e., the engineering of sufficient permeability to facilitate efficient heat extraction). This assessment required estimation of the accessible resource base (electric-grade heat [>90ºC] at depths where drilling and stimulation are deemed achievable using current technology) and useful resource (heat that can be extracted from the accessible region). Electric-grade heat can be estimated from existing temperature models. The accessible resource base can be estimated as the electric-grade heat that exists at depths shallower than 6 km based on the limitations of current drilling and stimulation technologies, along with evidence for sustained natural fracture conductivity at depth. The useful part of the accessible heat can be estimated as the product of three efficiencies and factors: the heat extraction efficiency, the viable geology factor, and the reservoir spacing efficiency. The accessible and useful parts of the resource can be estimated in units of heat, or in units of electric power using an electrical conversion efficiency, which is a function of resource temperature. We also estimate the ranges for each of the efficiencies and describe the motivations behind the choice of best estimates used for the recent assessment. An analytic solution is provided for the useful resource above any depth (in units of electric power), where efficiency estimation assumes nearly steady heat extraction rates that cool reservoirs to 90ºC over 30 years of power generation.

Great Basin↗
USGS2026

Surface variable‐based machine learning for scalable arsenic prediction in undersampled areas

In the United States, private wells are not federally regulated, and many households do not test for Arsenic (As). Chronic exposure is linked with multiple health outcomes, and risk can change sharply over short distances and with well depth. Coarse maps or sparse sampling often miss exceedances. Most existing models operate at ∼1 km resolution and use groundwater chemistry or detailed geologic logs, which limits their use in undersampled areas where improved guidance is most needed. We overcome these limitations by developing a machine learning model for Minnesota, USA, that predicts As exposure risk using only surficial variables from remote sensing and global data sets. Variables related to surface water hydrology and geomorphology are selected based on mechanistic links that control redox conditions and As mobilization. Local training was essential, and surficial geology variables that are more sensitive to local conditions were needed to maximize model accuracy. The resulting complete model was sufficiently sensitive to generate accurate and detailed risk maps and depth profiles of As concentrations above the 10 μg/L maximum contaminant level. Accuracy depended on local training data density. We identified a training data density of 0.07 wells/km 2 as a practical target for stable county-level performance. Maps of exceedance probabilities highlight priority areas for testing that are particularly important in rural communities that have received less sampling. These results support public health action by guiding where to install wells and where to test them, how much new sampling is needed, and where treatment outreach is most urgent.

Minnesota↗
USGS2024

Ungulate migrations of the Western United States, volume 4

Broadly distributed across the Western United States, ungulates (hooved mammals) play an important role in ecosystem function by affecting vegetation communities and forming the prey base for large carnivores. Additionally, ungulates provide economic benefits to regional communities through tourism and hunting and hold cultural significance for many Tribal communities. Many ungulates migrate seasonally between distinct summer and winter ranges to take advantage of spatially and temporally variable food sources and avoid threats such as predators and deep snow. Increasingly, these migrations are threatened by the growing human footprint and associated subdivisions, energy development, and increased traffic volume. Efforts to study ungulate populations and conserve their migrations received support in recent years from the U.S. Department of the Interior Secretarial Order No. 3362, which provided Federal support for enhancing habitat quality for ungulates across the Western States. In response to Secretarial Order No. 3362, the U.S. Geological Survey (USGS) established the Corridor Mapping Team, a collaboration among USGS and participating State and Federal wildlife management agencies and numerous Tribal Nations. Together, the Corridor Mapping Team maps ungulate migrations throughout the Western United States in the USGS “Ungulate Migrations of the Western United States” report series. This report (volume 4) details migrations and seasonal ranges from 31 new herds throughout nine Western States. Additionally, this report includes updates to two herds published in previous reports. Including this report, the report series has provided the mapped migrations and seasonal ranges of 182 unique herds and has provided a map-based inventory of the documented ungulate migrations across the Western United States for biologists, managers, policy makers, and conservation practitioners. This report also discusses how the mapping efforts associated with the Corridor Mapping Team can be used to guide management and policy regarding renewable energy development and ungulate disease, specifically chronic wasting disease, in the Western United States.

Arizona, California, Colorado, New Mexico, Nevada,↗
USGS2025

Landsliding follows signatures of wildfire history and vegetative regrowth in a steep coastal shrubland

Five years after the deadly and destructive 9 January 2018 Montecito debris flows (Santa Barbara County, California, USA), an atmospheric river storm on 9 January 2023 triggered widespread landsliding that affected many of the same drainages in the Santa Ynez Mountains. Using high-resolution aerial imagery, we identified >10,000 landslides over an ∼160 km 2 area. Most of the landslides were shallow (<1 m in depth) translational debris slides that initiated on steep (∼40°), south-facing hillslopes, with the highest incidence of landsliding in a sandstone-dominated bedrock unit. The landslides mobilized into debris flows and delivered substantial quantities of sediment downstream, which contributed to costly infrastructure impairments. We detected order-of-magnitude differences in landslide density across the study area that could not be attributed to variations in geomorphology (topographic aspect and slope), geology (bedrock type), or hydrology (seasonal antecedent rainfall, peak hourly storm rainfall intensity, total storm rainfall), which are usually considered relevant factors for shallow landsliding. Rather, we found that vegetation regrowth following wildfire was likely a relevant factor associated with the highly variable landslide densities. Hillslopes with less and different types of vegetation regrowth after fire appear to have been more susceptible to shallow landslides. We identify a possible vegetation control on postfire landsliding, which highlights an opportunity for hypothesis testing using more advanced techniques to track the evolution of vegetation cover and vegetation type in steep shrubland environments following wildfire.

California↗
USGS2026

Syn-magmatic subsidence during the early stages of continental rifting in the Mesoproterozoic—A reanalysis of legacy data for the Midcontinent Rift, western Lake Superior

The Midcontinent Rift system (ca. 1.1 Ga) is a 2000-km-long series of elongated volcanic and sedimentary troughs and associated intrusive centers exposed chiefly in the Lake Superior region of North America. The rift system represents a long history of intense magmatism and subsequent sedimentation that was arrested by far-field tectonic events before sea-floor spreading was established. The premature cessation preserved a record of processes related to the beginning of continental rifting. The rift system under Lake Superior has been long studied using seismic-reflection data collected as part of the Great Lakes International Multidisciplinary Program on Crustal Evolution (GLIMPCE). We reexamine GLIMPCE Line C by developing a detailed velocity model for time to depth conversion constrained by other legacy data. We corroborate the model and develop a geologic interpretation using gravity and magnetic modeling and ties to geology mapped onshore. We recognize superposed subsiding sedimentary and volcanic basins for the southern half of the Line C depth section. This interpretation differs from previous paradigms that show major crustal faults that bound half-grabens or full grabens. We conclude that high-velocity (6.9 km/s) intrusive zones rather than major crustal faults border the sides of the basins. We speculate that the volcanic basin represents the initiation of seaward dipping reflectors. The syn-magmatic subsidence can be explained by dike injection and volcanic loading. Discrete lava basins throughout the region likely subsided at different times in a disorganized manner along the rift trend, raising questions about the long-term role of lithospheric thinning and melt generation.

Michigan, Minnesota, Ontario, Wisconsin↗
USGS2025

Gas emissions from the Sulphur Bank Mercury Mine hydrothermal system, Clear Lake volcanic field, California

The Sulphur Bank Mercury Mine (SBMM) hydrothermal system offers insights into active degassing processes in the Clear Lake volcanic field (CLVF), a high-threat region based on its record of Holocene eruptions and proximity to populated areas. Here we present chemical and isotopic analyses of gas samples collected between 2015 and 2023, along with the first comprehensive CO 2 flux survey of the SBMM area conducted in 2023. Sampled gases are CO 2 - and CH 4 -rich (≥84 and 6 mol% in dry gas, respectively) with high mantle-derived helium contributions ( 3 He/ 4 He = 6.54–7.86 R C /R A ). Carbon isotopic compositions of CO 2 (δ 13 C = −10.0 to −9.5 ‰) and CH 4 (δ 13 C = −35.8 ‰) indicate mixed sources, with significant contributions from metamorphism of organic-rich Franciscan Complex rocks hosting the hydrothermal system. Modeling of gas compositions shows that scrubbing by interaction with air-saturated groundwater strongly influences observed compositional variability. From our CO₂ flux measurements, we estimate the deeply derived CO 2 emission rate from the SBMM hydrothermal area (0.2 km 2 ) at 240 t d −1 , comparable to many quiescently degassing volcanoes worldwide. We also provide a first-order estimate of CH 4 emissions at approximately 0.5 t d −1 . Our findings establish crucial baseline data for future volcanic monitoring efforts, enhancing detection capabilities for potential changes in this active hydrothermal system. This work contributes to the broader understanding of volatile contributions from volcanic and metamorphic sources to the global carbon budget, while highlighting the strong influence of bedrock geology on gas compositions in the CLVF.

California↗
USGS2026

Geologic map of pre-Middle Jurassic basement rocks beneath the Atlantic and Gulf Coastal Plains in Florida

Much of the southeastern United States, including all of Florida, is covered by flat-lying sedimentary strata of the Atlantic and Gulf Coastal Plains which have accumulated since Middle Jurassic time. The pre-Middle Jurassic rocks that underlie these coastal plains in Florida, here collectively referred to as “basement,” are known only from a relatively small number of boreholes. This scientific investigations map presents an interpretation of the basement geology in a 1:1,000,000-scale subsurface geologic map with supporting text, data, and figures. The subsurface mapping methodology integrates petrographic, geochronological, thermochronological, geochemical, and mineralogical analyses of drill cores and cuttings in the context of regional geophysical data. The pre-Middle Jurassic rocks of Florida consist of the Gondwanan (West African) Suwannee terrane which was accreted to Laurentia during the Alleghanian orogeny and subsequently intruded by Permian granites, superposed by early Mesozoic rift basins, and partially overlain by bimodal Jurassic volcanic rocks. The younger basement components, specifically the Southwest Florida volcanic province, North Florida tholeiites, early Mesozoic rift basins, and Alleghanian granitoids, have correlative and contemporaneous units throughout the Appalachian orogen. In contrast, Florida’s older basement rocks, including Paleozoic siliciclastic strata of the Suwannee basin, North Florida volcanic series, Osceola and Gaskin intrusive complexes, and the St. Lucie Metamorphic Complex, have neither surface exposures nor unequivocal correlates. Major structures include early Mesozoic normal faults and northwest-striking transfer zones such as the Jay fault. Many of these faults define the boundaries of subbasins within the South Georgia rift system. Top-of-basement structure contours show gentle arches and embayments that are also recognized in overlying coastal plain strata.

Florida↗
USGS1999

Water-quality assessment of the New England coastal basins in Maine, Massachusetts, New Hampshire, and Rhode Island: Environmental settings and implications for water quality and aquatic biota

The New England Coastal Basins in Maine, Massachusetts, New Hampshire, and Rhode Island constitute one of 59 study units selected for water-quality assessment as part of the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) program. England Coastal Basins study unit encompasses the fresh surface waters and ground waters in a 23,000 square-mile area that drains to the Atlantic Ocean. Major basins include those of the Kennebec, Androscoggin, Saco, Merrimack, Charles, Blackstone, Taunton, and Pawcatuck Rivers. Defining the environmental setting of the study unit is the first step in designing and conducting a multi-disciplinary regional water-quality assessment. The report describes the natural and human factors that affect water quality in the basins and includes descriptions of the physiography, climate, geology, soils, surface- and ground-water hydrology, land use, and the aquatic ecosystem. Although surface-water quality has greatly improved over the past 30 years as a result of improved wastewater treatment at municipal and industrial wastewater facilities, a number of water-quality problems remain. Industrial and municipal wastewater discharges, combined sewer overflows, hydrologic modifications from dams and water diversions, and runoff from urban land use are the major causes of water-quality degradation in 1998. The most frequently detected contaminants in ground water in the study area are volatile organic compounds, petroleum-related products, nitrates, and chloride and sodium. Sources of these contaminants include leaking storage tanks, accidental spills, landfills, road salting, and septic systems and lagoons. Elevated concentrations of mercury are found in fish tissue from streams and lakes throughout the study area.

Maine, Massachusetts, New Hampshire, Rhode Island↗