Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Natural Resources Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

837 records · Page 10Linked to original sources
USGS2025

Fault displacement model for surface principal rupture of strike-slip faults

The probability distribution model for principal displacement accommodated on the surface main trace is a critical input to the fault displacement hazard analysis. This article presents a new model for strike-slip ruptures in the moment magnitude ( M ) range of 6 to 8.3. The new model is the outcome of a multi-year research effort to update the widely used model developed by Petersen and others in 2011. Updates include the adoption of the Fault Displacement Hazard Initiative database and enhancements to rupture and displacement data preparation. Statistical formulation and estimation have also been updated substantially. A three-parameter modified normal distribution that we refer to as the negative Exponentially Modified Gaussian distribution is adopted to model the probability distribution of the natural logarithm of principal displacement. Formulation for the mean parameter of the modified normal includes a random earthquake term, a nonlinear scaling relation with M , and an ellipse function for along-main-trace variation. The aleatory variability of the updated model now depends on M as well as site’s along-main-trace position. These updates not only significantly improve the fit to the distribution of the observed displacements but also yield reasonable 95th percentile predictions for M > 7.5 events. Alternative models representing the estimation uncertainty of the M -scaling relation are also developed. These new models are compared to the previous model in terms of percentile predictions and the calculated hazard curves. The steeper hazard curves from the new models yield a lower exceedance rate than the normal-distribution based model developed previously by Petersen and others.

Earthquake Spectra↗
USGS1999

Water-quality assessment of the New England coastal basins in Maine, Massachusetts, New Hampshire, and Rhode Island: Environmental settings and implications for water quality and aquatic biota

The New England Coastal Basins in Maine, Massachusetts, New Hampshire, and Rhode Island constitute one of 59 study units selected for water-quality assessment as part of the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) program. England Coastal Basins study unit encompasses the fresh surface waters and ground waters in a 23,000 square-mile area that drains to the Atlantic Ocean. Major basins include those of the Kennebec, Androscoggin, Saco, Merrimack, Charles, Blackstone, Taunton, and Pawcatuck Rivers. Defining the environmental setting of the study unit is the first step in designing and conducting a multi-disciplinary regional water-quality assessment. The report describes the natural and human factors that affect water quality in the basins and includes descriptions of the physiography, climate, geology, soils, surface- and ground-water hydrology, land use, and the aquatic ecosystem. Although surface-water quality has greatly improved over the past 30 years as a result of improved wastewater treatment at municipal and industrial wastewater facilities, a number of water-quality problems remain. Industrial and municipal wastewater discharges, combined sewer overflows, hydrologic modifications from dams and water diversions, and runoff from urban land use are the major causes of water-quality degradation in 1998. The most frequently detected contaminants in ground water in the study area are volatile organic compounds, petroleum-related products, nitrates, and chloride and sodium. Sources of these contaminants include leaking storage tanks, accidental spills, landfills, road salting, and septic systems and lagoons. Elevated concentrations of mercury are found in fish tissue from streams and lakes throughout the study area.

Maine, Massachusetts, New Hampshire, Rhode Island↗
USGS2026

New measurements indicate that natural geologic methane emissions from microseepage in the Michigan Basin are likely negligible

The magnitude of natural geologic methane (CH 4 ) emissions to the atmosphere (including emissions of fossil CH 4 from offshore and onshore gas and oil seeps, diffuse microseepage, mud volcanoes, volcanic vents, and geothermal areas) is highly uncertain. The largest component of geologic emissions is thought to be microseepage, which is the diffuse flux of CH 4 from soils across large areas of productive hydrocarbon basins. The accuracy of existing bottom-up estimates of microseepage is limited by low spatial coverage of published microseepage measurements. We present the first soil—atmosphere CH 4 flux measurements from Michigan Basin, USA. Results from 335 measurements taken during summer and winter seasons across a large portion of the basin suggest microseepage is nonexistent in the sampled region. Even areas with predictive features for microseepage (e.g., underlying mature, organically rich source rocks, proven gas accumulations, faults, and lineaments) yield null or negative fluxes, suggesting that CH 4 emissions from microseepage are negligible throughout our study region. A Monte Carlo method was used to place an upper limit on the regional-mean microseepage flux, in which synthetic patchy microseepage distributions were generated and tested against our observations to assess the impact of possible emission hot spots that were missed by our sampling strategy. Our analysis finds it is very unlikely that regional-mean emissions are as high as assumed in a previous global microseepage study. The observed lack of seepage may be explained by groundwater flow, active methanotrophy, glacial sediments, and bedded salt deposits, which could inhibit vertical gas migration and release to atmosphere.

Michigan↗
USGS2025

Insights and strategic opportunities from the USGS 2024 Per- and Polyfluoroalkyl Substances (PFAS) Interagency Workshop

Introduction In 2021, the U.S. Geological Survey (USGS) published Circular 1490 titled, “Integrated Science for the Study of Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) in the Environment: A Strategic Science Vision for the U.S. Geological Survey” (Tokranov and others, 2021). Circular 1490 was created to be a resource for USGS scientists prioritizing and planning research related to per- and polyfluoroalkyl substances (PFAS) and to be a guide for developing partnerships with other scientists, State and Federal agencies, and stakeholders engaged in PFAS research and management and mitigation of the environmental and human-health effects of PFAS. This USGS PFAS Strategic Science Vision document was intended to be the foundation for a “living strategic vision,” periodically providing updates on the state of USGS PFAS research, emerging PFAS data gaps and needs, and progress on interagency and stakeholder PFAS partnerships and priorities. To meet this objective, the USGS planned to host an Interagency and Stakeholder PFAS Workshop every 2–3 years. During September 10–12, 2024, the USGS hosted the first Interagency and Stakeholder PFAS Workshop in Reston, Virginia. The Workshop brought together experts from other Federal agencies (U.S. Environmental Protection Agency, National Institute of Environmental Health Sciences, Food and Drug Administration, Department of Defense [Air Force, Army]), State agencies (Washington Fish and Wildlife, Virginia Department of Transportation), and academia (Harvard University, University of Maryland) to address key challenges relating to the measurement and modeling of PFAS and the implications for environmental health. Participants engaged in in-depth discussions centered around six pivotal topics related to PFAS: (1) sampling protocols, methods and interpretation; (2) environmental sources, source apportionment, and occurrence; (3) environmental fate and transport; (4) human and wildlife exposure routes and risk; (5) bioconcentration, bioaccumulation, and biomagnification; and (6) ecotoxicology and effects. Each topic had three breakout sessions. A recurrent theme of workshop discussions was how data on a nationwide scale for PFAS occurrence in various environmental matrices, including air, water, food crops, biota, soil, and streambed sediment could help to advance scientific understanding. Participants noted significant geospatial data gaps, particularly in the midwestern and southern United States and the Pacific Northwest. PFAS data collection tends to be more robust along the eastern seaboard and in California. Participants stressed how enhancing the integration of large and small datasets across various agencies could help to support national scale understanding of PFAS. To address these gaps, attendees suggested leveraging datasets from Federal entities like the USGS and the U.S. Department of Defense, State agencies, and municipal utility services to develop predictive contaminant detection and transport models. Improved coordination between water quality programs and USGS research could help to facilitate access to valuable data, leading to comprehensive databases that inform PFAS point (wastewater treatment plants and landfills) and nonpoint (runoff from land, atmospheric deposition, food packaging) sources, environmental transport mechanisms, environmental detection and concentrations, potential exposure routes, and health effects on different biota, including humans. A specific request was made to develop a map demarking the depth of modern (1953 or later) groundwater, which is susceptible to surface-derived anthropogenic (that is, human-made) contamination, based on tritium-age dating. Emphasis was placed on incorporation of hydrology, groundwater flow paths, groundwater–surface water interactions, and landscape factors in predictive statistical models as a step to improve contaminant source identification and tracking. Molecular fingerprinting approaches garnered attention as techniques to link specific PFAS mixtures detected in a sample to environmental sources and levels in biota (Dávila-Santiago and others, 2022). Integrating data from abiotic (that is, water, soil, and air) and biotic (that is, living organisms) systems identified as a research opportunity. For example, understanding the composition of soils and sediments, which include a mixture of mineral, plant, and animal components, could advance understanding of exposure pathways. The discussions highlighted opportunities to explore and understand the potential redistribution and biotic exposures of PFAS from biosolid and wastewater treatment plant effluent land application practices, in addition to atmospheric releases and discharges from landfill and wastewater treatment plants. Participants identified research gaps surrounding how these sources may contribute to contamination and may affect surrounding ecosystems, including a better definition of anthropogenic background concentrations. Moving forward, the collection of co-occurrence data was noted as a means to improve understanding of complex mixtures and to leverage companion modeling efforts focused on areas with high and low contamination levels to identify areas of concern and unaffected resources. Participants emphasized how centralized USGS databases and the establishment of sample-metadata archives can help to ensure that samples are preserved and accessible for future research. In conclusion, the workshop participants identified opportunities to bridge data gaps and improve measurement techniques, modeling frameworks, databases, and communication, to enhance the understanding of PFAS and their effects on environmental and human health. Upon completion of the workshop, participants indicated an interest in developing strategic data collection, modeling, and analytical approaches to address these challenges.

Open-File Report↗
USGS1997

An optimized network for phosphorus load monitoring for Lake Okeechobee, Florida

Phosphorus load data were evaluated for Lake Okeechobee, Florida, for water years 1982 through 1991. Standard errors for load estimates were computed from available phosphorus concentration and daily discharge data. Components of error were associated with uncertainty in concentration and discharge data and were calculated for existing conditions and for 6 alternative load-monitoring scenarios for each of 48 distinct inflows. Benefit-cost ratios were computed for each alternative monitoring scenario at each site by dividing estimated reductions in load uncertainty by the 5-year average costs of each scenario in 1992 dollars. Absolute and marginal benefit-cost ratios were compared in an iterative optimization scheme to determine the most cost-effective combination of discharge and concentration monitoring scenarios for the lake. If the current (1992) discharge-monitoring network around the lake is maintained, the water-quality sampling at each inflow site twice each year is continued, and the nature of loading remains the same, the standard error of computed mean-annual load is estimated at about 98 metric tons per year compared to an absolute loading rate (inflows and outflows) of 530 metric tons per year. This produces a relative uncertainty of nearly 20 percent. The standard error in load can be reduced to about 20 metric tons per year (4 percent) by adopting an optimized set of monitoring alternatives at a cost of an additional $200,000 per year. The final optimized network prescribes changes to improve both concentration and discharge monitoring. These changes include the addition of intensive sampling with automatic samplers at 11 sites, the initiation of event-based sampling by observers at another 5 sites, the continuation of periodic sampling 12 times per year at 1 site, the installation of acoustic velocity meters to improve discharge gaging at 9 sites, and the improvement of a discharge rating at 1 site.

Florida↗
USGS2025

Assessing flood water infiltration and storage in a restored floodplain

In urban areas, floodplain restoration is gaining prominence as a strategy for restoring the natural functions of floodplain ecosystems and reducing flood risk. This has spurred research into potential interactions between floodwaters, the hyporheic zone, and the floodplain aquifer. An urban restored stream in Wisconsin, USA, was used as a case study to examine four methods to estimate floodplain infiltration and storage during overbank floods. We characterised flood-related infiltration over a 4-year period from 2018 through 2021 by simultaneously and continuously measuring groundwater levels and vertical temperature profiles with stream water levels linked to high-resolution flood inundation maps. High-resolution topographic data helped to quantify surface floodplain storage and the unsaturated soil volume relative to flood stage. Infiltration estimates from the simple methods align well with those from the more complex methods; however, the complex methods provide additional insights about the factors influencing infiltration. Results from all methods indicate that the volume of water that vertically infiltrates during floods is likely small relative to the total volume of the flood, with 0.08%–0.52% of flood water infiltrating into the floodplain, on average. Spatially variable vertical hydraulic gradients, driven by flood depth, groundwater level, and permeability, imply heterogeneous patterns of infiltration across the floodplain. Gradients favourable for infiltration typically occurred during the onset of flooding but, over the study period, were mostly (98% of the time) favourable for groundwater discharge to the channel (non-flood periods). These findings highlight the importance of considering surface-groundwater dynamics, floodplain soils, and unsaturated floodplain volume in defining the benefits of floodplain infiltration for flood attenuation.

Wisconsin↗
USGS2025

Hydrologic response of groundwater and streamflow to natural and anthropogenic drivers of change in headwaters of the upper Colorado River basin during recent wet (1982–1999) and drought (2000–2022) conditions

Study region: Headwaters of the upper Colorado River basin (UCOL), USA Study focus: Surface-water and groundwater numerical models incorporating water-use information were used to investigate changes in climate, water use, and simulated hydrologic responses of snow processes, evapotranspiration, groundwater, and streamflow during recent wet (1982–1999) and drought (2000–2022) periods in the headwater subregions of the upper Colorado River basin. New hydrologic insights for the region: Decreases in average streamflow between wet and drought periods ranged from 20 % in the Colorado River headwaters subregion to 23 % in the Gunnison River headwaters subregion. Like streamflow, average surface runoff was statistically less during the drought than the wet period, with decreases from 24–31 % in the headwaters. On a volume basis, runoff decreases were greater than streamflow decreases in both the Colorado River and Gunnison River headwaters. Although the amount of water-year groundwater discharge to streams remained nearly the same between the wet and drought periods, groundwater as a percentage of streamflow increased between the wet and drought periods, highlighting the importance of groundwater in sustaining streamflow during drought conditions. Multiple linear regression analyses revealed that snowmelt-only models were better than the best precipitation and temperature models at explaining streamflow variability from all headwater subregions for both the wet and drought periods.

Arizona, Colorado, New Mexico, Utah, Wyoming↗
USGS2024

Anaerobic biodegradation of perfluorooctane sulfonate (PFOS) and microbial community composition in soil amended with a dechlorinating culture and chlorinated solvents

Perfluorooctane sulfonate (PFOS), one of the most frequently detected per - and polyfluoroalkyl substances (PFAS) occurring in soil, surface water, and groundwater near sites contaminated with aqueous film-forming foam (AFFF), has proven to be recalcitrant to many destructive remedies, including chemical oxidation. We investigated the potential to utilize microbially mediated reduction (bioreduction) to degrade PFOS and other PFAS through addition of a known dehalogenating culture, WBC-2, to soil obtained from an AFFF-contaminated site. A substantial decrease in total mass of PFOS (soil and water) was observed in microcosms amended with WBC-2 and chlorinated volatile organic compound (cVOC) co-contaminants — 46.4 ± 11.0 % removal of PFOS over the 45-day experiment. In contrast, perfluorooctanoate (PFOA) and 6:2 fluorotelomer sulfonate (6:2 FTS) concentrations did not decrease in the same microcosms. The low or non-detectable concentrations of potential metabolites in full PFAS analyses, including after application of the total oxidizable precursor assay, indicated that defluorination occurred to non-fluorinated compounds or ultrashort-chain PFAS. Nevertheless, additional research on the metabolites and degradation pathways is needed. Population abundances of known dehalorespirers did not change with PFOS removal during the experiment, making their association with PFOS removal unclear. An increased abundance of sulfate reducers in the genus Desulfosporosinus (Firmicutes) and Sulfurospirillum (Campilobacterota) was observed with PFOS removal, most likely linked to initiation of biodegradation by desulfonation. These results have important implications for development of in situ bioremediation methods for PFAS and advancing knowledge of natural attenuation processes.

Science of the Total Environment↗
USGS2024

Enhanced microplastic fragmentation along human built structures in an urban waterway

Plastic pollution and microplastic (MP, 1 µm to 5 mm) generation are growing problems affecting the global community and a wide range of natural and disturbed environments. Urban and suburban waterways are directly impacted by plastic pollution due to their proximity to population centers and many different types single use plastic waste sources. In this study, plastic waste accumulation and fragmentation was investigated along the Cooper River in Camden County, NJ. Polymer composition was identified for individual plastic waste particles collected along the Cooper River using Fourier transform infrared (FTIR) spectrometry. Multiple human-built structures (Wallworth Lake, Evans Pond and Hopkins Pond dams) along the Cooper River were found to accumulate different types of plastic waste. The accumulation of plastic waste along these structures resulted in the initial stages of plastic fragmentation and the identification of large MP particles (1 to 5 mm). Quantitative analysis revealed that fragmented polystyrene (PS) particles constituted 82.8% of the total plastic fragments identified, most of which were identified at the Wallworth Lake dam. Many other types of fragmented plastic litter, including polyethylene and polypropylene, were identified at the Wallworth Lake dam, as well. This research demonstrates that engineered structures within urban and suburban aquatic ecosystems serve as significant aggregators of plastic debris, thereby catalyzing its breakdown into microplastics. Considering the escalating ecological and human health ramifications of microplastic proliferation, the fragmentation of plastic waste in an urban and suburban waterway observed in this study can also result in potentially toxic smaller MP particles, and increased exposure to aquatic organisms and humans.

New Jersey↗
USGS2024

Predicted exposure of communities in southeastern United States to climate-related coastal hazards

A rigorous analysis of 21st Century multi-hazard exposure for U.S. Southeast Atlantic coastal communities indicates that up to 70% of residents will be exposed daily to shallow and emerging groundwater by ~2100, 15 times higher than from surficial flooding alone. This threat further exacerbates other coastal stressors, such as flooding, subsidence, and beach erosion, that impact these vulnerable coastal communities and ecosystems under expected future climate change scenarios.

Florida, Georgia, North Carolina, South Carolina, ↗
USGS2026

The United States Magnetotelluric Array and the National Impedance Map

The United States Magnetotelluric Array (USMTArray) data set, collected in the years 2006–2024, consists of more than 1,700 long-period magnetotelluric stations covering the entirety of the contiguous United States on a quasi-regular 70 km grid. Funding across multiple federal agencies was critical to sustaining this effort to its completion. Important components of the project included active guidance and participation from the MT community, the open and timely availability of all data, and the application of consistent instrumentation and robust data processing. Together with parallel advancement in the development of publicly available three-dimensional (3D) inversion codes, the USMTArray has revitalized the US magnetotelluric community and increased the visibility of magnetotellurics within the Earth-science community. Taken as a whole, these data are visualized as the National Impedance Map, which, together with a 3D synthesis conductivity model of the nation, reveals the electrical architecture of the contiguous US. USMTArray data are used by researchers worldwide for fundamental and applied studies, including investigations of continental architecture and evolution, estimation of hazards to critical infrastructure due to geomagnetic storms, and assessment of the nation's undiscovered geothermal and mineral resources. We here review the history and development of the project, discuss the challenges and successes in its execution, present the National Impedance Map and synthesis conductivity model, and highlight the breadth of research stemming from this rich data set.

conterminous United States↗
USGS2026

Temperate wetlands lose climate-cooling capacity under warming

Temperate inland wetlands have long been viewed as climate regulators, with sustained CO₂ sequestration offsetting continuous CH₄ emissions over centennial–millennial timescales. However, the net climatic effect of these opposing fluxes remains uncertain under anthropogenic warming as they differ in both magnitude and atmospheric lifetime. We combine 19,000 CH₄ chamber measurements from 202 temperate inland wetlands with carbon burial rates from 16 dated sediment cores in North America’s Prairie Pothole Region to estimate greenhouse gas dynamics over two centuries. Here we show that CH₄ emissions rise by ~1.39 kg CH₄ ha⁻¹ yr⁻¹ over the historical period and are projected to approach 950 kg CH₄ ha⁻¹ yr⁻¹ under high-forcing scenarios by 2100, while CO₂ sequestration is expected to decline by ~0.3 kg CO₂ ha⁻¹ yr⁻¹, driving a shift toward persistent net CO₂-equivalent source behaviour and a weakening of the long-term cooling effect that wetlands have provided under natural conditions.

Prairie Pothole Region↗
USGS2026

Emergent headwater types for watershed monitoring, research, and planning

Headwaters—that is headwater streams and the watersheds they drain—strongly influence water quality, ecosystem services, and hydrologic connectivity, yet remain poorly mapped, monitored, and understood at large spatial scales. Using available spatial data to classify headwater “types” could therefore enhance the utility of sparse monitoring data to advance research and watershed planning—and help update literature-based perceptual models of headwaters as steep, forested, and minimally disturbed watersheds. Here, we analyze headwaters across the contiguous United States to quantify how their attributes (climate, topography, land cover, soils) vary regionally and differ from their downstream watersheds. Our analysis (a) identified seven dominant headwater types with distinct combinations of biophysical and climatic attributes and (b) revealed systematic contrasts with downstream watersheds, with strongest differences in attributes representing potential flowpath depth. Our findings offer a transferable framework for classifying, modeling, and managing these critical yet understudied components of the hydrologic network.

conterminous United States↗
USGS2024

Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources

As part of U.S. Geological Survey's (USGS) efforts to identify and assess geothermal energy resources of the US, a three-dimensional (3D) geologic and thermal model has been constructed for the Williston Basin, USA. The geologic model consists of all sedimentary units above the Proterozoic and Archean crystalline rock (called basement herein), with a total sedimentary thickness of up to 5 km near the basin center. Twenty-nine geologic units were mapped from interpreted formation tops from 16,465 wells. A 3D temperature model was constructed to a depth of 7 km by constructing a 3D heat flow model for the sedimentary units, followed by estimating underlying temperature using a one-dimensional (1D) analytic solution for heat flow within the underlying crystalline basement. Using the sedimentary basin model, heat flow was simulated in 3D and was calibrated using three temperature datasets: 1) 24 high-confidence static temperature logs (equilibrium thermal profiles), 2) more than15,000 drill stem test (DST) measurements from >7,000 wells, and 3) more than 45,000 bottomhole temperature (BHT) measurements from >14,000 wells. The DST and BHT datasets provide broad spatial coverage, but are lower confidence, primarily because measurements were made prior to attaining thermal equilibrium. DST and BHT measurements were binned regionally to develop representative thermal profiles that generally agree with these lower quality data (hereafter called pseudowell temperature profiles). Layer properties (primarily thermal conductivity and compaction curves) were set to best estimate values, then the heat flow model was calibrated to fit pseudowell and static temperature logs primarily by adjusting basal heat flow to approximate the overall temperature profile. Minor adjustments to thermal conductivity allowed adjusting changes in slope at lithologic contacts. Resulting maps include 3D temperature and basal (bottom of sedimentary units) heat flow estimates, which are used as input for the temperature model of the basement. The crystalline basement temperature model uses an analytic 1D solution to the heat flow equation that requires estimates of heat flow and temperature at the upper boundary (i.e., the sediment/basement contact), radiogenic heat production within the crystalline basement, and reference thermal conductivity (i.e., uncorrected for temperature). Two regions of high heat flow are identified: 1) in western North Dakota along the North American Central Plains Conductivity Anomaly and 2) in eastern Montana near the Poplar dome. Within the sedimentary column in the center of the basin of the basin, an area of approximately 100,000 km2 is predicted to have moderate- to high-temperature geothermal resources (>90 °C) under the thickest sequences of sediments. Where thick insulation and high heat flow coincide, electric-grade resources can be less than 4 km deep. Assuming a maximum feasible drilling depth of 7 km, temperatures are predicted to be as high as 175 °C. The geologic model may be used to identify strata at sufficient temperatures that may have natural permeability or that may have conditions that favor development of enhanced/engineered geothermal systems resources.

Montana, North Dakota, South Dakota↗
USGS2026

Bascom Laser Diffraction Sedimentology Laboratory, Reston, Virginia

Introduction At the Bascom Laser Diffraction Sedimentology Laboratory, which is located in the Florence Bascom Geoscience Center at U.S. Geological Survey (USGS) headquarters in Reston, Virginia, scientists use physical sedimentology and particle characterization techniques to conduct detailed sediment characterization. Scientists address research problems in collaboration with other USGS science centers, State geological surveys, commercial industry, universities, and other partners. Laboratory capabilities include laser diffractometry for quantitative particle-size analysis, portable x-ray fluorescence (XRF) analysis for determining elemental abundances in rock or sediment samples, petrographic analysis of geologic media, and mechanical sieve analysis. These methods are used to analyze soil and sediment core material from terrestrial, marine, and lacustrine environments, surface sediments from coastal regions, and calcareous materials. Work done by the laboratory supports geologic mapping, resource assessments, land change studies, and geohazard analyses.

Fact Sheet↗
USGS2024

The addition of 144Nd atomic mass to routine ICP-MS analysis as a Quick Screening Tool for Approximating Rare Earth Elements (Q-STAR) in natural waters

Rare earth elements (REEs) are a class of critical minerals, all of which can have supply chain vulnerability that impacts economic security. These elements are widely measured in environmental matrices via inductively coupled plasma mass spectrometry (ICP-MS); however, successful quantification can require time-consuming, sample-specific optimization. While a sample-by-sample approach is appropriate for targeted quantification studies, this approach is not suitable for mineral exploration efforts where rapidly screening thousands of samples for the presence of REEs is desired. Here, we demonstrated the use of a Quick Screening Tool for Approximating REEs (Q-STAR) to detect REEs in surface water and groundwater matrices, collected as part of existing environmental studies. A mass-to-charge ratio of 144 ( m / z = 144) was added to an ICP-MS method to screen for REEs in filtered water samples submitted for metals analyses to the U.S. Geological Survey (USGS) National Water Quality Laboratory. We detected the presence of REEs above a reference threshold of 1200 counts per second in 18 % of pre-selected 6626 samples. Using this screened dataset, we mapped estimated dissolved REE concentrations across the United States in relation to ecoregions and underlying geology. Data are constrained to where sample collection took place but nevertheless show estimated aqueous dissolved REE concentrations on a geographic scale that has not yet been studied. To validate Q-STAR, REEs were measured in a USGS standard reference sample, a subset of 88 archived filtered water samples, and in fresh filtered surface water samples. Our targeted analyses demonstrated a strong linear relationship between Q-STAR predicted and measured values in all archived samples for Nd (r 2 = 0.94), and light REEs (LREEs) such as lanthanum (La) (r 2 = 0.93), praseodymium (Pr) (r 2 = 0.94) and samarium (Sm) (r 2 = 0.94). Using Q-STAR screen values, nine field sites were identified and surface water samples recollected to confirm the continued presence of Nd and LREEs. Q-STAR can be used to screen an unlimited number of water samples for the presence of REEs prior to time-intensive and costly quantitative analyses and to generate large REE datasets for further investigation.

Journal of Geochemical Exploration↗
USGS2024

Using stable oxygen isotope dual-inlet isotope-ratio mass spectrometry to elucidate uranium transport and mixed 230Th/U calcite formation ages at the seminal Devils Hole, Nevada, natural laboratory

Rationale Vein calcite in Devils Hole has been precipitating continuously in oxygen-isotope equilibrium at a constant temperature for over 500 000 years, providing an unmatched δ 18 O paleoclimate time series. A substantial issue is that coeval calcite (based on matching δ 18 O values) has uranium-series ages differing by 12 000 years. Methods An unparalleled high-accuracy δ 18 O chronology series from continuously submerged calcite was used to correct the published uranium-series ages of non-continuously formed calcite in two cores, cyclically exposed by water-table decline during glacial–interglacial transitions. This method relies on the premise that the δ 18 O values of coevally precipitated calcite are identical, allowing matching calcite δ 18 O values to establish formation ages. Results Exposed calcite can have apparent ages that are 12 000 years too young due to unrecognized uranium mobility and resulting mixed ages identified in over 50 mixed uranium-series ages from previous studies. Secondary uranium in fluids, sourced from the formation or dissolution of porous carbonate deposits (folia) with high uranium-238 ( 238 U) concentrations, has migrated up to 10 mm into vein calcite. Conclusions The continuously submerged Devils Hole δ 18 O chronology is not explained by orbital forcing. Rather, this chronology represents a regional climate record in the southern Great Basin of sea-surface-temperature (SST) variations off California, variations that preceded the last and penultimate deglaciations by 5000 to approximately 10 000 years. Temporal discrepancies between the continuously submerged Devils Hole chronology and other regional δ 18 O records (e.g., the Leviathan chronology) can be explained by unrecognized cryptic, pernicious uranium mobility, leading to model estimations that may be thousands of years younger than actual ages. Consequently, paleo-moisture availability, water-table, and groundwater recharge models based on these mixed uranium-series ages are too young by as much as 12 000 years. The potential for post-formation uranium addition in subaerial cores and speleothems underscores the need for caution in uranium-series dating, highlighting δ 18 O time-series comparisons as a method for identifying mixed ages.

Nevada↗