Geology ReportsSearch

SEARCH · Geology Reports

Results for “Hydrologic Processes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

536 records · Page 10Linked to original sources

Regreening, restoring, and reconnecting a southwestern wetland ecosystem – the Zeedyk wetland

Alluvial wetland ecosystems are vital as biodiversity hotspots but are increasingly threatened by anthropogenic stressors and drought. These pressures are especially acute in arid and semi-arid regions, where eco-hydrologic connectivity is fragile and recovery is slow. This study quantifies the efficacy of nature-based solutions, particularly the ‘Zeedyk approach,’ which employs low-tech Natural Infrastructure in Dryland Streams (NIDS)—including rock detention structures—to slow surface water, raise groundwater tables, and restore wetland function at a spring-fed wetland in Cebolla Canyon, New Mexico, U.S.A. Our results depict a Restoration Feedback Loop that captures stages of change from a healthy wetland in 1935, altered by 20th-century agriculture and grazing, to the re-establishment of the historical flow regime by 2024 documented through an 89-year archive of aerial imagery (1935–2024). By the end of our study period, the Spring-Fed Wetland had expanded by roughly 229% of the original 1935 area, to 4.13 ha. Using 40 years of satellite data, we assess changes in vegetation and hydrology with remote sensing indices. Spatial and temporal analyses reveal significant increases in vegetation greenness and wetness, particularly in an Expanded Wetland subregion, which exhibited ∼3.5x higher wetness and ∼1.5x higher greenness trends compared to adjacent areas. Monthly metrics highlight seasonal variability, with increases in greenness linked to monsoonal rainfall and lateral water redistribution, indicating that restoration impacts extend beyond the primary wetland. This study demonstrates the utility of cloud-based platforms like Google Earth Engine and USGS EarthExplorer for long-term monitoring of wetland restoration, while quantifying the efficacy of the ‘Zeedyk approach’ and demonstrating its potential as a scalable method to restore and conserve wetland meadows in other arid and semi-arid landscapes.

New Mexico

Simulated effects of future water availability and protected species habitat in a perennial wetland, Santa Barbara County, California

This study evaluates the potential water availability in Barka Slough and the effects of changing hydrological conditions on the aquatic habitat of five protected species. Barka Slough is a historically perennial wetland at the downstream western end of the San Antonio Creek Valley watershed (SACVW). A previously published hydrologic model of the SACVW for 1948–2018 was extended to include 2019–2021 and then modified to simulate the future years of 2022–2051. Two models simulating the future years of 2022–2051 were constructed, each with different climate inputs: (1) a repeated historical climate and (2) a 2070-centered Drier Extreme Warming climate (2070 DEW). The model with the 2070 DEW climate had warmer temperatures and an increase in average annual precipitation driven by larger, albeit more infrequent, precipitation events than the model with the historical climate. Simulated groundwater pumpage resulted in cumulative groundwater storage depletion and groundwater-level decline in Barka Slough in both future models. The simulations indicate that Barka Slough may transition from a perennial to an ephemeral wetland. Streamflow, stream disconnection, and depth to groundwater are key habitat metrics for federally listed species in Barka Slough. Future seasonal conditions for each metric are more likely to affect federally listed species’ habitats under 2070 DEW climatic conditions. Future seasonal streamflow volume may negatively impact unarmored threespine stickleback ( Gasterosteus aculeatus williamsoni ) and tidewater goby ( Eucyclogobis newberryi) habitats. Future seasonal stream disconnection may negatively impact the unarmored threespine stickleback habitat. Future groundwater-level decline may negatively impact Gambel’s watercress ( Nasturtium gambelii ) and La Graciosa thistle ( Cirsium scariosum var. loncholepis ) habitats and could influence the ability to use Barka Slough as a restoration or reintroduction site for these species. Results from this study can be used to inform water management decisions to sustain future groundwater availability in the SACVW.

California

Groundwater flow model for the Des Moines River alluvial aquifer near Des Moines, Iowa

Des Moines Water Works (DMWW) is a regional municipal water utility that provides residential and commercial water resources to about 600,000 customers in Des Moines, Iowa, and surrounding municipalities in central Iowa. DMWW has identified a need for increased water supply and is exploring the potential for expanding groundwater production capabilities in the Des Moines River alluvial aquifer, where it operates two radial collector wells (RCWs). The U.S. Geological Survey, in cooperation with DMWW, completed a study of the Des Moines River alluvial aquifer and interactions of the RCWs with the aquifer; no previously published model has included the existing well locations, which is the focus of this model. A conceptual and numerical groundwater flow model have been developed to characterize the Des Moines River alluvial aquifer under existing conditions, to simulate water levels observed in the RCWs, and to provide publicly accessible hydrologic data and research that advance understanding of the regional hydrologic system and can potentially be used in the future to evaluate groundwater production scenarios. Model performance was assessed by comparing observed and simulated groundwater levels that included water level elevations, water level changes, water level inequality observations, surface water streamflow, and change in surface water volume from upstream to downstream. Water table elevation in the aquifer layers is on average slightly overestimated with average absolute value error less than 1.5 meters at both RCWs and less than 2.5 meters for all observation wells in the alluvial aquifer layers. The model also accurately simulated water tables greater than the RCW design minimum (a water level threshold at which RCW pumping is reduced) in all timesteps for which water level observation data existed. Water table elevation error was higher in other model layers that were not the focus of the study, and the model did not accurately match streamflow targets.

Iowa

Natural source zone depletion of crude oil in the subsurface: Processes controlling mass losses of individual compounds

At many petroleum hydrocarbon spill sites, residual spilled product forms a long-term source of groundwater contamination. The phrase source zone natural depletion is used to refer to the mass loss rates. Overall mass lost under environmental conditions was analyzed using conservative biomarker concentrations for a 1979 oil spill in northern Minnesota, USA. After 40–41 years, an average of 50% of the mass was lost with values ranging from 22% to 57% depending on location. It is also important to understand the composition changes in the source. To understand controls on the losses of individual compounds, concentrations of volatile hydrocarbons in oil samples were compared with aqueous solubilities, and pore-space oil saturations. The results of the comparison show that losses of the oil compounds were controlled by pore-space oil saturations, solubility, and susceptibility to degradation under methanogenic conditions. Compounds that degrade under methanogenic conditions, including toluene, o -xylene, and n -alkanes are more depleted compared to benzene, ethylbenzene, and m - and p -xylene for which losses are dominated by dissolution. These rates and compound-specific behaviors form a foundation for improved modeling approaches and risk analyses.

Minnesota

Volcanic gas monitoring

Introduction As magma rises through the crust, decreasing pressure conditions allow volatiles to exsolve from the magma. These volatiles then migrate upward through the crust, where they can be stored at shallower levels or escape to the atmosphere. Rising magma also heats rock masses beneath volcanic centers, causing water in shallow aquifers and hydrothermal systems to boil and release additional gases and steam (see chapter F , this volume; Ingebritsen and Hurwitz, 2024). The chemistry and quantity of gases that reach the surface during periods of quiescence or volcanic unrest can reveal that gas-rich magma is ascending, crystallizing, or alternatively stalling, with important implications for volcanic hazard (for example, Sutton and others, 1992; Aiuppa and others, 2007, 2021; Werner and others, 2009, 2011, 2012; Moretti and others, 2013; de Moor and others, 2016; Lewicki and others, 2019; Edmonds and others, 2022; Kern and others, 2022; Kunrat and others, 2022). Most volcanoes in Alaska and the western United States are characterized by weak degassing, with one or more low-temperature fumaroles (typically near the local boiling temperature of water) and connect to a deeper and sometimes extensive hydrothermal system (for example, McGee and others, 2001; Symonds and others, 2003a, b). Hydrothermal systems will affect the chemistry of rising gases exsolved from deeper magma (Symonds and others, 2001), including sulfur dioxide (SO 2 ), hydrogen chloride (HCl), and water vapor (for example, Doukas and Gerlach, 1995; Gerlach and others, 1998, 2008; Symonds and others, 2001; Werner and others, 2013). As an example, depending on factors such as temperature, pressure, and oxidation state, rising SO 2 will react with groundwater to form hydrogen sulfide (H 2 S) gas, dissolved sulfate (SO 4 2− ), or elemental sulfur (Christenson, 2000; Symonds and others, 2001; Werner and others, 2008). The reaction and dissolution of SO 2 into shallow groundwater is commonly referred to as scrubbing, and can reduce the likelihood that ascending, degassing magma can be detected. Carbon dioxide, however, in addition to exsolving from magma early in the ascent process, is not easily removed by hydrothermal fluids (Lowenstern, 2001). As scrubbing and other processes take place, the SO 2 /H 2 S, CO 2 /SO 2 , and CO 2 /H 2 S ratios may change. High rates of SO 2 emission indicate that magma has moved to relatively shallow levels in the volcano and that the system has heated up enough to establish dry pathways from depth to the surface. Monitoring multiple gas species and the total output of those species is thereby useful for volcano monitoring during both periods of quiescence, to establish background degassing conditions, and during unrest, when gas geochemistry and emission rates can provide information on changing conditions, such as magma ascent. To provide context for multidisciplinary volcano forecasts, we focus on the following two key required capabilities: (1) characterizing baseline geochemistry and gas discharge from volcanoes and volcanic regions and (2) monitoring changes in gas geochemistry and discharge to inform forecasts of volcanic eruptions and their effects. Sufficient baseline data must be collected to identify and interpret anomalous degassing associated with volcanic unrest (for example, Sorey and others, 1998; Rouwet and others, 2014). Differences in volcano type, baseline degassing rates, local hydrology, and geography (for example, high versus low latitude) will result in a different baseline for each volcano. Volcanoes of any threat level that exhibit one or more degassing phenomena would ideally be monitored by techniques needed to establish baseline degassing data, with the sampling frequency of baseline data dictated by the threat level (table E1). Additional monitoring techniques become necessary during periods of unrest. In general, three of the most important techniques for gas monitoring are (1) direct sampling of fumarole, spring, and soil gases for laboratory geochemical measurements, (2) measurements of the chemical composition of the volcanic plume and emission rates of major gas species (for example, H 2 O, CO 2 , SO 2 , and H 2 S) by satellite, airborne, or ground-based techniques, and (3) measurements of diffuse emissions of CO 2 and other gases through soils. Various methods and instruments may be useful both for baseline studies and during unrest.

Scientific Investigations Report

Decoding the oxidative digestion mechanism for polystyrene nanoplastic detection in the Great Lakes using a customizable Raman spectral processing algorithm

Despite the concerns surging around nanoplastics (NPs) regarding their prevalence and bioavailability in freshwater systems, robust detection of NPs in complex environmental matrices is hindered by the lack of standardized sample pretreatment and a mechanistic understanding of oxidative digestion. Here, we systematically investigate the interaction between hydrogen peroxide (H 2 O 2 ) and polystyrene (PS) NPs during digestion in deionized (DI) water and four environmental matrices from in and around the Great Lakes Basin. To facilitate high-throughput analysis, we develop Pre_peak, a customizable Raman spectral processing algorithm that achieves >99% accuracy for both NP identification and interference rejection, allowing reliable NP quantification via pixel counting and systematic decoding of the oxidative digestion mechanisms. In DI water, varying H 2 O 2 doses from 0 to 30% has negligible effects on the recovery and Raman signal intensity of PS NPs over 24 hours of digestion. However, morphological changes and aggregation of PS NPs are observed when the H 2 O 2 dose exceeds 20%. Prolonged digestion further leads to progressive NP loss. In natural waters, the optimal dosage and digestion duration depend on matrix characteristics, including dissolved organic matter (DOM) and ion composition. This study provides mechanistic insights into NP–oxidant interactions and underscores the need for matrix-tailored digestion protocols to advance standardized NP detection in freshwater environments.

Great Lakes

Correction to A regime shift in sediment export from a coastal watershed during a record wet winter, California: Implications for landscape response to hydroclimatic extremes

In the referenced article, the authors would like to correct text in the first paragraph on page 2571, Figure 9 and its caption. The changes reflect an error made in the processing of the rainfall intensity-duration data used to compare storms to published debris flow triggering thresholds. The correctly processed data does not change the interpretations made in the paper but does correctly indicate that the investigated storms did not exceed the rainfall intensity – duration threshold of Cannon (1988) but did significantly exceed the debris flow triggering threshold of Wieczorek (1987).

Earth Surface Processes and Landforms

Geochemical processes related to mined, milled, or natural metal deposits in a rapidly changing global environment

The demand for metals and raw materials, such as nickel and copper, has been projected to expand in the coming decades, driven by the global energy transition, the need for green technologies, and expanding infrastructure. Consequently, the increasing extraction and production of mining waste can have adverse impacts on surrounding environments and human health. The aim of this thematic collection is to fill critical knowledge gaps in the present-day cycles of metal(loid)s from source to larger sinks, and the effect of environmental management, anthropogenic development, and climate change. Altogether, the studies have been conducted in different natural settings around the world and comprise investigations in laterites, a soil-medicinal plant system, watersheds, and banded iron formations, among others. The geochemical applications in tracing mineralization, its secondary products, and/or potential impact on the immediate environment are highly diverse with applied tools ranging from isotope tracers to major and trace element systematics. Particularly the use of rare earth elements, their patterns and anomalies are methods employed by several studies in this collection. We summarize the findings to offer a potential future direction for the use of geochemical tracing techniques in resource exploration in the context of climate change and environmental challenges.

Geochemistry: Exploration, Environment, Analysis

Noble and base metal distribution and processes affecting ore tenors in the disrupted lower stratigraphy of the Stillwater Complex, USA

Exploration continues for contact-style Ni-Cu sulfide and chromitite-associated PGE mineralization in ultramafic rocks of the Stillwater Complex. At the Iron and Chrome Mountain areas, massive sulfides occur along the complex’s footwall contact and anomalous concentrations of PGE+Au are associated with the three lowermost chromitite seams. Southeast of Chrome Mountain, magmatic layering is highly disrupted by the presence of faults, magmatic breccias, serpentinized discordant dunites, pyroxenite pegmatoids, and disaggregated chromitite seams. The bulk rock chemistry, sulfide chemistry, and noble metal mineralogy of samples from this area were examined to determine the deportment of PGE and processes that led to enrichments in PGE, Au, Cu, Co and Ni. Results show that a sulfide liquid was the principal collector of PGE. If sulfide liquid was initially deposited with chromite, it was disaggregated or redistributed by subsequent melt or fluid infiltration, which may have resulted in the offset of peak PGE(+Cu, Ni) from peak Cr 2 O 3 concentrations, and upgraded PGE tenors. Upon cooling, PGE exsolved from sulfides to form discrete bismuth tellurides, arsenides, arsenic sulfides, antimonides, and alloys, commonly along the margins of sulfide globules. Calculated metal tenors are highest in the disseminated sulfides southwest of Chrome Mountain, whereas massive and net-textured sulfides near the Iron Mountain-Camp zone represent monosulfide solid solution cumulates. At progressively shallower levels, higher metal tenors combined with lower S/Se ratios are consistent with increasing R-factors from 100 to 100,000. Serpentinization and talc-tremolite alteration resulted in S loss through partial replacement of sulfides by secondary silicate+carbonate+magnetite+sulfide assemblages, further upgrading Ni-Cu-PGE tenors. The present work shows that processes responsible for the disruption of magmatic layering and post-magmatic fluid alteration along the intrusion’s lower contact led to noble and base metal enrichments.

Montana

Characterization of the hydrogeologic framework, groundwater-flow system, geochemistry, and aquifer hydraulic properties of the shallow groundwater system in the Wilcox and Lorraine process areas of the Wilcox Oil Company Superfund site near Bristow, Oklahoma, 2022

The Wilcox Oil Company Superfund site (hereinafter referred to as “the site”) was formerly an oil refinery northeast of Bristow in Creek County, Oklahoma. Historical refinery operations contaminated the soil, surface water, streambed sediments, alluvium, and groundwater with refined and stored products at the site. The Wilcox and Lorraine process areas are where the highest concentrations of volatile organic compounds, semivolatile organic compounds, polycyclic aromatic hydrocarbons, and trace elements (including metals) (collectively hereinafter referred to as “contaminants”) were measured in a local shallow perched groundwater system within the alluvium (hereinafter referred to as the “alluvial aquifer”) at the site during previous site assessments. In order to understand the potential migration of contaminants through the soil and groundwater in these areas, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, investigated aquifer characteristics of the alluvial aquifer in the Wilcox and Lorraine process areas of the site to (1) document hydraulic conductivity and other aquifer characteristics of the alluvial aquifer that govern contaminant fate and transport, (2) describe the geospatial extent and concentration of the contaminants in the alluvial aquifer in the Wilcox and Lorraine process areas, and (3) describe the geochemical controls pertaining to oxidation and reduction governing the fate and transport and the degradation potential of contaminants in the groundwater. Various data were compiled and collected to evaluate the aquifer characteristics at the site including the hydrogeologic framework, groundwater-flow system, geochemistry, and hydraulic properties of the aquifer. A total of 20 new (2022) groundwater monitoring wells were installed at the site to collect data used to supplement groundwater-level altitude and groundwater-quality data collected from older, existing groundwater monitoring wells and piezometers. Data compiled and collected for the study were used to evaluate the characteristics of the alluvial aquifer at the site. These aquifer characteristics are defined by the hydrogeologic framework, groundwater-flow system, geochemistry, and hydraulic properties of the aquifer.

Oklahoma

Low flows and flow duration of Tennessee streams through 1981

Estimates of low-flow characteristics and flow duration for the period of record at continuous-record streamflow gages are essential in hydrologic studies and water-resources management. This report provides estimates of low flow for 1, 3, 7, 14, 30, 60, and 90 consecutive days for recurrence intervals of 2, 5, 10, and 20 years for continuous-record streamflow gages. These estimates were used in correlation methods to estimate low flow at partial-record streamflow sites for 1, 3, and 7 consecutive days for a recurrence interval of 10 years; and 3 consecutive days for a recurrence interval of 20 years.

Tennessee

Three-dimensional hydrogeologic framework model of the Russian River watershed, California

The Russian River watershed is in northern Sonoma County and southern Mendocino County, California, in the northern part of the California Coast Ranges. The Russian River serves as a supply for agricultural irrigation and for municipal, domestic, and commercial uses. Through a cooperative agreement with the California State Water Resources Control Board and Sonoma County Water Agency, the U.S. Geological Survey has completed studies to better understand the hydrogeologic system and develop numerical hydrologic modeling tools to evaluate and aid in managing groundwater resources. This report focuses on the development of a digital three-dimensional hydrogeologic framework model of the Russian River watershed for use in groundwater resource assessment and numerical models. The digital three-dimensional hydrogeologic framework model of the Russian River watershed portrays the altitude, thickness, and extent of five hydrogeologic units. These five hydrogeologic units include (1) a basement unit, (2) the Sonoma Volcanics, (3) a consolidated sedimentary rock unit, (4) an unconsolidated sediment unit, and (5) channel alluvium. Model input data were compiled from published geologic maps, interpreted well data, and a model of the top of basement derived from gravity data. These data were used to construct surfaces that represent the upper and lower subsurface boundaries of each hydrogeologic unit. Top surfaces were created for the five hydrogeologic units and then stacked in three dimensions to create a solid-volume digital model. The digital three-dimensional hydrogeologic framework model described in this report and the corresponding data represent the generalized geometry of the subsurface geologic units; the model reproduces the input geologic data with reasonable accuracy and is consistent with previously published subsurface conceptualizations of the region. The model indicates the overall geometry of the basement within the watershed and the spatial extent, altitude, and thickness of the basin-filling units. The hydrogeologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

California

Technique for estimating depth of floods in Tennessee

Estimates of flood depths are needed for design of roadways across flood plains and for other types of construction along streams. Equations for estimating flood depths in Tennessee were derived using data for 150 gaging stations. The equations are based on drainage basin size and can be used to estimate depths of the 10-year and 100-year floods for four hydrologic areas. A method also was developed for estimating depth of floods having recurrence intervals between 10 and 100 years. Standard errors range from 22 to 30 percent for the 10-year depth equations and from 23 to 30 percent for the 100-year depth equations.

Tennessee

The digital archivist: Automating legacy macroseismic data processing using large language models

Macroseismic data are a key resource to investigate shaking and damage from preinstrumental and early instrumental eras. However, data are often stored as inconsistently formatted reports describing observed shaking and damage, making manually parsing and interpreting accounts labor‐intensive. We introduce a novel workflow using Google’s Gemini 2.5 Pro large language model (LLM) to automate the extraction and structuring of macroseismic observations from summary reports. We apply this workflow to the 22 March 1957 M 5.3 Daly City, California, earthquake as a case study. We used Gemini to extract addresses, originally assigned modified Mercalli intensity values, and descriptions from each report. To address coordinate precision limits, addresses were geocoded via Google’s Geocoding application programming interface. This workflow yielded over 2300 geocoded intensity reports for the Daly City earthquake. We use the geocoded accounts, with the original report intensity assignments, to develop a shaking intensity map that in some respects rivals modern Did You Feel It? Maps. We also extract and present data for the 9 February 1971 M L 6.7 Sylmar, California, earthquake. Our results demonstrate the potential of LLMs for reliably extracting and analyzing large, unstructured macroseismic datasets. LLMs offer a scalable solution for rapidly digitizing macroseismic archives, enabling their broader use to constrain ground‐motion models in modern seismic hazard analysis and to improve our understanding of site effects in urban areas. The concepts explored here may also be applied to the handling of other legacy seismological and earth science data.

Seismological Research Letters

Hydrogeology, water budget, and simulated groundwater availability in the Salt Fork Arkansas River and Chikaskia River alluvial aquifers, northern Oklahoma, 1980–2020

The 1973 Oklahoma Groundwater Law (Oklahoma Statute §82–1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s aquifers to determine the maximum annual yield for each groundwater basin. The U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, conducted an updated hydrologic investigation of the Salt Fork Arkansas River and Chikaskia River alluvial aquifers in northern Oklahoma for the study period spanning 1980–2020 and evaluated the simulated effects of potential groundwater withdrawals on groundwater flow and availability in the Salt Fork Arkansas River alluvial aquifer. A hydrogeologic framework and conceptual model were developed to guide the development of a numerical model. Three groundwater-availability scenarios were evaluated by using the calibrated numerical model, which was focused on the Salt Fork Arkansas River alluvial aquifer. These scenarios were used to (1) estimate equal-proportionate-share groundwater withdrawal rates, (2) quantify the potential effects of projected well withdrawals on groundwater storage over a 50-year period, and (3) simulate the potential effects of a hypothetical 10-year drought. The 20-, 40-, and 50-year equal-proportionate-share groundwater withdrawal rates for the Salt Fork Arkansas River alluvial aquifer under normal recharge conditions were about 0.63, 0.58, and 0.57 acre-foot per acre per year, respectively. Projected 50-year groundwater withdrawal scenarios were used to simulate the effects of modified well withdrawal rates. Because well withdrawals were less than 2 percent of the calibrated numerical-model water budget, changes to the well groundwater withdrawal rates had little effect on simulated Salt Fork Arkansas River base flows and groundwater storage in the Salt Fork Arkansas River alluvial aquifer. A hypothetical 10-year drought scenario was used to simulate the potential effects of a prolonged period of reduced recharge on groundwater storage. Groundwater storage at the end of the hypothetical drought period was 14.5 percent less than the groundwater storage of the calibrated numerical model without the simulated drought.

Oklahoma

Toward a new framework to evaluate process-based model configurations and quantify data worth prior to calibration

Model criticism, discrimination, and selection methods often rely on calibrated model outputs. Because calibration can be computationally expensive, model criticism can first be undertaken by assessing model outputs obtained from limited prior parameter ensembles. However, such prior-based methods are often heuristic and do not formalize the notion of balancing model consistency with data and model complexity (i.e., model adequacy). We present a new framework to discriminate among candidate models prior to calibration that formalizes prior-to-calibration model adequacy into a metric to implicitly balance prior model output data coverage with model complexity represented by prior output (co)variance. The prior model adequacy metric “Mahalanobis distance deviation” quantifies the deviation of (a) the set of squared Mahalanobis distances of data from a prior model output distribution from (b) the set of squared Mahalanobis distances of data from their own distribution. A new data worth metric “discernment value” is also presented which quantifies the value of data for screening less-adequate models prior to calibration. Discernment value is calculated from the change in variance of a weighted average of prior model outputs from all candidate models due to less-adequate model outputs receiving lower weight. The framework is demonstrated using a one-dimensional groundwater flow model with eight possible configurations. A synthetic data network is used to test the framework. Results show the framework identifies the candidate models most similar to the true model used to create the synthetic data. Discernment values show variation in the value of different data types and locations for screening less-adequate models.

Water Resources Research

Is satellite-derived bathymetry vertical accuracy dependent on satellite mission and processing method?

This research focusses on three satellite-derived bathymetry methods and optical satellite instruments: (1) a stereo photogrammetry bathymetry module (SaTSeaD) developed for the NASA Ames stereo pipeline open-source software (version 3.6.0) using stereo WorldView data; (2) physics-based radiative transfer equations (PBSDB) using Landsat data; and (3) a modified composite band-ratio method for Sentinel-2 (SatBathy) with an initial simplified calibration, followed by a more rigorous linear regression against in situ bathymetry data. All methods were tested in three different areas with different geological and environmental conditions, Cabo Rojo, Puerto Rico; Key West, Florida; and Cocos Lagoon and Achang Flat Reef Preserve, Guam. It is demonstrated that all satellite derived bathymetry (SDB) methods have increased accuracy when the results are aligned with higher-accuracy ICESat-2 ATL24 track bathymetry data using the iterative closest point (ICP). SDB vertical accuracy depends more on location characteristics than the method or optical satellite instrument used. All error metrics considered (mean absolute error, median absolute deviation, and root mean square error) can be less than 5% of the maximum bathymetry depth penetration for at least one method, although not necessarily for the same method for all sites. The SDB error distribution tends to be bimodal irrespective of method, satellite instrument, alignment, site, or maximum bathymetry depth, leading to the potential ineffectiveness of traditional error metrics, such as the root mean square error. However, our analysis demonstrates that performing detrending where possible can achieve an error distribution as close to normality as possible for which error metrics are more diagnostic.

Florida

Apatite and monazite geochemistry record magmatic and metasomatic processes in rare earth element mineralization at Mountain Pass, California

The largest rare earth element (REE) deposit in the United States is a carbonatite intrusion at Mountain Pass in the Mojave Desert, California. Despite a clear spatiotemporal association of alkaline silicate and carbonatite intrusions at Mountain Pass, a genetic model of their mutual formation has not been resolved. The Mountain Pass carbonatite has long been upheld as an example of a primary magmatic body, but recent work has suggested it could be fluid-derived. This study investigates the geochemistry of apatite and monazite grains from the alkaline silicate and carbonatite stocks and dikes of the Mountain Pass district, to elucidate the magmatic history of the intrusive suite and identify the role of fluids in rare earth element mineralization. Three apatite populations are identified in the alkaline silicate rocks. A primary magmatic apatite group supports intrusion of the stocks as separate pulses of magma derived from a spatially extensive metasomatized mantle source region. The second group implicates the role of a regional fluid that mobilized light rare earth elements from apatite grains. A minor group of inherited apatite cores, identified by low Sr and negative Eu anomalies, supports assimilation of crustal material in the formation of the intrusive suite. Analyses of monazite and apatite grains from the carbonatite orebody also reveal a mix of primary magmatic and metasomatic (fluid-related) minerals. Compositional similarities between primary phosphates in the carbonatite and alkaline silicate rocks support a genetic link between the intrusive suites. The presence of fluids regionally and within the carbonatite orebody indicates the Mountain Pass carbonatite should not be classified as a purely magmatic REE deposit.

Arizona, California, Nevada