SEARCH · Geology Reports

Results for “Ground Water Modeling Investigation Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources

USGS2009

Watershed Models for Decision Support for Inflows to Potholes Reservoir, Washington

A set of watershed models for four basins (Crab Creek, Rocky Ford Creek, Rocky Coulee, and Lind Coulee), draining into Potholes Reservoir in east-central Washington, was developed as part of a decision support system to aid the U.S. Department of the Interior, Bureau of Reclamation, in managing water resources in east-central Washington State. The project is part of the U.S. Geological Survey and Bureau of Reclamation collaborative Watershed and River Systems Management Program. A conceptual model of hydrology is outlined for the study area that highlights the significant processes that are important to accurately simulate discharge under a wide range of conditions. The conceptual model identified the following factors as significant for accurate discharge simulations: (1) influence of frozen ground on peak discharge, (2) evaporation and ground-water flow as major pathways in the system, (3) channel losses, and (4) influence of irrigation practices on reducing or increasing discharge. The Modular Modeling System was used to create a watershed model for the four study basins by combining standard Precipitation Runoff Modeling System modules with modified modules from a previous study and newly modified modules. The model proved unreliable in simulating peak-flow discharge because the index used to track frozen ground conditions was not reliable. Mean monthly and mean annual discharges were more reliable when simulated. Data from seven USGS streamflow-gaging stations were used to compare with simulated discharge for model calibration and evaluation. Mean annual differences between simulated and observed discharge varied from 1.2 to 13.8 percent for all stations used in the comparisons except one station on a regional ground-water discharge stream. Two thirds of the mean monthly percent differences between the simulated mean and the observed mean discharge for these six stations were between -20 and 240 percent, or in absolute terms, between -0.8 and 11 cubic feet per second. A graphical user interface was developed for the user to easily run the model, make runoff forecasts, and evaluate the results. The models; however, are not reliable for managing short-term operations because of their demonstrated inability to match individual storm peaks and individual monthly discharge values. Short-term forecasting may be improved with real-time monitoring of the extent of frozen ground and the snow-water equivalent in the basin. Despite the models unreliability for short-term runoff forecasts, they are useful in providing long-term, time-series discharge data where no observed data exist.

Scientific Investigations Report↗

USGS1998

Recharge-area delineation and hydrology, McCraken Springs, Fort Knox Military Reservation, Meade County, Kentucky

McCraken Springs, consisting of three perennial springs - Main, Bat Cave, and Rocky Springs—and several intermittent springs, are used as a source of public water by the Fort Knox Military Reservation in Meade County, Ky. The water supply provided by McCraken Springs is potentially vulnerable to natural and induced stresses on the karst aquifer and to degradation by contaminants introduced by stormwater entering sinkholes and a large sinking stream in the Springs' recharge area. The U.S. Department of the Army is preparing a spring-basin protection plan for McCraken Springs, in accordance with State water-supply regulations and as specified under U.S. Environmental Protection Agency Guidelines for the Wellhead Protection Program (U.S. Environmental Protection Agency, 1991). In order to provide the information needed to prepare the plan, the U.S. Geological Survey (USGS), in cooperation with the U.S. Army Corps of Engineers, conducted a hydrogeologic study of the McCraken Springs in 1997-98. This report presents the results of that investigation. Ground-water-tracer tests and the results of potentiometric-surface mapping were used to identify ground-water basins drained by major perennial springs and to delineate the approximate boundaries of the recharge area for McCraken Springs. Additional hydrologic data were collected to determine the discharge and recharge characteristics of the Springs. Karst aquifers and springs are widely recognized as being more sensitive to degradation to point- and nonpoint-source contamination than most granular and fractured-rock aquifers (Field, 1990). Delineation of the geographic area contributing recharge to a water-supply spring is a principal step in identifying potential sources of ground-water contamination and developing a strategy to ensure the availability and protect the sustainability of the water supply. Conventional methods of aquifer testing and numerical modeling are not sufficient to determine the flow boundaries of ground-water basins in conduit-dominated karst aquifers. Previous studies published by Quinlan and Ewers (1989); Mull and others (1990); Bayless and others (1994); and Schindel and others (1995) demonstrate the utility of ground-water tracer tests, used in combination with potentiometric-surface mapping, to identify flow directions in karst aquifers, and to delineate karst ground-water-basin boundaries.

Kentucky↗

USGS2008

Questa baseline and pre-mining ground-water quality investigation. 25. Summary of results and baseline and pre-mining ground-water geochemistry, Red River Valley, Taos County, New Mexico, 2001-2005

Active and inactive mine sites are challenging to remediate because of their complexity and scale. Regulations meant to achieve environmental restoration at mine sites are equally challenging to apply for the same reasons. The goal of environmental restoration should be to restore contaminated mine sites, as closely as possible, to pre-mining conditions. Metalliferous mine sites in the Western United States are commonly located in hydrothermally altered and mineralized terrain in which pre-mining concentrations of metals were already anomalously high. Typically, those pre-mining concentrations were not measured, but sometimes they can be reconstructed using scientific inference. Molycorp?s Questa molybdenum mine in the Red River Valley, northern New Mexico, is located near the margin of the Questa caldera in a highly mineralized region. The State of New Mexico requires that ground-water quality standards be met on closure unless it can be shown that potential contaminant concentrations were higher than the standards before mining. No ground water at the mine site had been chemically analyzed before mining. The aim of this investigation, in cooperation with the New Mexico Environment Department (NMED), is to infer the pre-mining ground-water quality by an examination of the geologic, hydrologic, and geochemical controls on ground-water quality in a nearby, or proximal, analog site in the Straight Creek drainage basin. Twenty-seven reports contain details of investigations on the geological, hydrological, and geochemical characteristics of the Red River Valley that are summarized in this report. These studies include mapping of surface mineralogy by Airborne Visible-Infrared Imaging Spectrometry (AVIRIS); compilations of historical surface- and ground- water quality data; synoptic/tracer studies with mass loading and temporal water-quality trends of the Red River; reaction-transport modeling of the Red River; environmental geology of the Red River Valley; lake-sediment chemistry; geomorphology and its effect on ground-water flow; geophysical studies on depth to ground-water table and depth to bedrock; bedrock fractures and their potential influence on ground-water flow; leaching studies of scars and waste-rock piles; mineralogy and mineral chemistry and their effect on ground-water quality; debris-flow hazards; hydrology and water balance for the Red River Valley; ground-water geochemistry of selected wells undisturbed by mining in the Red River Valley; and quality assurance and quality control of water analyses. Studies aimed specifically at the Straight Creek natural-analog site include electrical surveys; high-resolution seismic survey; age-dating with tritium/helium; water budget; ground-water hydrology and geochemistry; and comparison of mineralogy and lithology to that of the mine site. The highly mineralized and hydrothermally altered volcanic rocks of the Red River Valley contain several percent pyrite in the quartz-sericite-pyrite (QSP) alteration zone, which weather naturally to acid-sulfate surface and ground waters that discharge to the Red River. Weathering of waste-rock piles containing pyrite also contributes acid water that eventually discharges into the Red River. These acid discharges are neutralized by circumneutral-pH, carbonate-buffered surface and ground waters of the Red River. The buffering capacity of the Red River, however, decreases from the town of Red River to the U.S. Geological Survey (USGS) gaging station near Questa. During short, but intense, storm events, the buffering capacity is exceeded and the river becomes acid from the rapid flushing of acidic materials from natural scar areas. The lithology, mineralogy, elevation, and hydrology of the Straight Creek proximal analog site were found to closely approximate those of the mine site with the exception of the mine site?s Sulphur Gulch catchment. Sulphur Gulch contains three subcatchments?upper Sulphur Gulch, Blind Gulch, and Spring Gulc

New Mexico↗

USGS1986

Geohydrology and simulated response to ground-water pumpage in Carson Valley, a river-dominated basin in Douglas County, Nevada, and Alpine County, California

A numerical model was used to simulate the effect of development of the groundwater reservoir in Carson Valley on Carson River outflow, evapotranspiration, and groundwater levels and storage. The basin-fill groundwater reservoir consists of: (1) confined and unconfined sedimentary deposits of Quaternary age that underlie the valley floor, and (2) sedimentary deposits of Tertiary age that are exposed mainly on the east side of the valley. Water levels indicate the presence of two confined aquifer systems: one < 100 ft deep, and the other, generally deeper than 200 ft. The basin-fill reservoir is surrounded by bedrock that transmits recharge to the basin through weathered and fractured zones near the contact between bedrock and valley fill. Estimates were made of the distribution of hydraulic properties of aquifer materials, and of the components of inflow to and outflow from the basin-fill reservoir. Inflow components consisted of the following approximate quantities, in acre-ft/yr: (1) mainstem Carson River flow, 360,000; (2) direct precipitation, 70,000; (3) runoff from perennial and ephemeral streams, 24,000: and (4) subsurface inflow, 38,000. Approximate estimates of outflow components were, in acre-ft/yr; (1) mainstem Carson River flow, 291,000; (2) potential evapotranspiration, 200,000. Both inflow and outflow totaled about 490,000 acre-ft/yr. These flow volumes show that the hydrologic regimen of the basin is dominated by surface water flow of the Carson River. Steady-state and transient calibration of the model provided an unacceptable fit of observed versus simulated groundwater level fluctuations and storage, and surface water outflow from the valley. These values provide a reasonable balance for the simulated steady-state water budget. Simulations show that surface water flow is the ultimate source of about 75% of pumped water for six scenarios of possible future ground-water development. Model simulations indicate that changes from agricultural to urban land uses could decrease the loss of Carson River outflow to pumpage when streamflow is not used for flood irrigation in that area.

California, Nevada↗

USGS2007

Hydrogeology and Simulated Ground-Water Flow in the Salt Pond Region of Southern Rhode Island

The Salt Pond region of southern Rhode Island extends from Westerly to Narragansett Bay and forms the natural boundary between the Atlantic Ocean and the shallow, highly permeable freshwater aquifer of the South Coastal Basin. Large inputs of fresh ground water coupled with the low flushing rates to the open ocean make the salt ponds particularly susceptible to eutrophication and bacterial contamination. Ground-water discharge to the salt ponds is an important though poorly quantified source of contaminants, such as dissolved nutrients. A ground-water-flow model was developed and used to delineate the watersheds to the salt ponds, including the areas that contribute ground water directly to the ponds and the areas that contribute ground water to streams that flow into ponds. The model also was used to calculate ground-water fluxes to these coastal areas for long-term average conditions. As part of the modeling analysis, adjustments were made to model input parameters to assess potential uncertainties in model-calculated watershed delineations and in ground-water discharge to the salt ponds. The results of the simulations indicate that flow to the salt ponds is affected primarily by the ease with which water is transmitted through a glacial moraine deposit near the regional ground-water divide, and by the specified recharge rate used in the model simulations. The distribution of the total freshwater flow between direct ground-water discharge and ground-water-derived surface-water (streamflow) discharge to the salt ponds is affected primarily by simulated stream characteristics, including the streambed-aquifer connection and the stream stage. The simulated position of the ground-water divide and, therefore, the model-calculated watershed delineations for the salt ponds, were affected only by changes in the transmissivity of the glacial moraine. Selected changes in other simulated hydraulic parameters had substantial effects on total freshwater discharge and the distribution of direct ground-water discharge and ground-water-derived surface-water (streamflow) discharge to the salt ponds, but still provided a reasonable match to the hydrologic data available for model calibration. To reduce the uncertainty in predictions of watershed areas and ground-water discharge to the salt ponds, additional hydrogeologic data would be required to constrain the model input parameters that have the greatest effect on the simulation results.

Scientific Investigations Report↗

USGS1983

Three-dimensional digital-computer model of the principal ground-water reservoir of the Sevier Desert, Utah

The principal ground-water reservoir in part of the Sevier Desert, Utah was modeled using a three-dimensional finite-difference model. The model was calibrated by comparing computed and observed water-level measurements in 1952, simulating results of aquifer tests, and simulating ground-water withdrawals during 1952-81 and comparing computed water-level changes during 1952-82 to observed changes. The results indicate the model is capable of predicting future water-level changes. The report includes a complete listing of the model data for the 1952-82 simulation.

Utah↗

USGS1972

Hydrogeologic characteristics of the valley-fill aquifer in the Arkansas River Valley, Bent County, Colorado

The investigation on which this report is based is a part of a comprehensive evaluation of the water resources of the Arkansas River valley undertaken by the U.S. Geological Survey in cooperation with the Colorado Water Conservation Board and the Southeastern Colorado Water Conservancy District. The study reach extends 150 miles from Pueblo to the Kansas State line. The water-resources investigation of the stream aquifer system in the Arkansas River valley, which began in 1963, is being made to provide information about the water resources for planning, management, and administration of the supply. The objectives of the investigation are to define the effects of present water use, to determine the relation between ground and surface water, and to evaluate the effects of proposed changes in water law and management. The major steps in the study are: (1) Inventory the water resources, (2) describe the hydrogeologic character of the aquifer, (3) document and evaluate the effects of development, (4) construct and verify models to aid in the evaluation of the hydrology, and (5) develop models to test water-management plans and to optimize water use.

Colorado↗

USGS1968

Analog simulation of ground-water development of the Saginaw Formation, Lansing metropolitan area, Michigan

This report was prepared as a part of the study of the water resources of Clinton, Eaton and Ingham Counties being made for the Tri-County Planning Commission by the Water Resources Division of the U. S. Geological Survey. The report describes one phase of the investigation, that is, the projections of future time-withdrawal-drawdown relationships obtained from an electric analog model study of the Saginaw Formation, the principal aquifer in the Lansing Metropolitan area. The study of the Tri-County Region is a part of the continuing program of water resources investigation conducted by the U. S. Geological Survey in cooperation with the Geological Survey Division of the Michigan Department of Conservation and other state and local agencies.

Michigan↗

USGS2007

Three-Dimensional Geologic Framework Model for a Karst Aquifer System, Hasty and Western Grove Quadrangles, Northern Arkansas

Understanding ground-water flow in a karst aquifer benefits from a detailed conception of the three-dimensional (3D) geologic framework. Traditional two-dimensional products, such as geologic maps, cross-sections, and structure contour maps, convey a mental picture of the area but a stronger conceptualization can be achieved by constructing a digital 3D representation of the stratigraphic and structural geologic features. In this study, a 3D geologic model was created to better understand a karst aquifer system in the Buffalo National River watershed in northern Arkansas. The model was constructed based on data obtained from recent, detailed geologic mapping for the Hasty and Western Grove 7.5-minute quadrangles. The resulting model represents 11 stratigraphic zones of Ordovician, Mississippian, and Pennsylvanian age. As a result of the highly dissected topography, stratigraphic and structural control from geologic contacts and interpreted structure contours were sufficient for effectively modeling the faults and folds in the model area. Combined with recent dye-tracing studies, the 3D framework model is useful for visualizing the various geologic features and for analyzing the potential control they exert on the ground-water flow regime. Evaluation of the model, by comparison to published maps and cross-sections, indicates that the model accurately reproduces both the surface geology and subsurface geologic features of the area.

Scientific Investigations Report↗

USGS1971

Hydrogeologic characteristics of the valley-fill aquifer in the Arkansas River Valley, Bent County, Colorado

The investigation on which this report is based is a part of a comprehensive evaluation of the water resources of the Arkansas River valley undertaken by the U.S. Geological Survey in cooperation with the Colorado Water Conservation Board and the Southeastern Colorado Water Conservancy District. The study reach extends 150 miles from Pueblo to the Kansas State line (see fig. 1 index map). The water-resources investigation of the stream aquifer system in the Arkansas River valley, which began in 1963, is being made to provide information about the water resources for planning, management, and administration of the supply. The objectives of the investigation are to define the effects of present water use, to determine the relation between ground and surface water, and to evaluate the effects of proposed changes in water law and management. The major steps in the study are: (1) Inventory the water resources, (2) describe the hydrogeologic character of the aquifer, (3) document and evaluate the effects of development, (4) construct and verify models to aid in the evaluation of the hydrology, and (5) develop models to test water-management plans and to optimize water use.

Colorado↗

USGS2006

A conceptual model of ground-water flow in the eastern Snake River Plain aquifer at the Idaho National Laboratory and vicinity with implications for contaminant transport

Ground-water flow in the west-central part of the eastern Snake River Plain aquifer is described in a conceptual model that will be used in numerical simulations to evaluate contaminant transport at the Idaho National Laboratory (INL) and vicinity. The model encompasses an area of 1,940 square miles (mi2) and includes most of the 890 mi2 of the INL. A 50-year history of waste disposal associated with research activities at the INL has resulted in measurable concentrations of waste contaminants in the aquifer. A thorough understanding of the fate and movement of these contaminants in the subsurface is needed by the U.S. Department of Energy to minimize the effect that contaminated ground water may have on the region and to plan effectively for remediation. Three hydrogeologic units were used to represent the complex stratigraphy of the aquifer in the model area. Collectively, these hydrogeologic units include at least 65 basalt-flow groups, 5 andesite-flow groups, and 61 sedimentary interbeds. Three rhyolite domes in the model area extend deep enough to penetrate the aquifer. The rhyolite domes are represented in the conceptual model as low permeability, vertical pluglike masses, and are not included as part of the three primary hydrogeologic units. Broad differences in lithology and large variations in hydraulic properties allowed the heterogeneous, anisotropic basalt-flow groups, andesite-flow groups, and sedimentary interbeds to be grouped into three hydrogeologic units that are conceptually homogeneous and anisotropic. Younger rocks, primarily thin, densely fractured basalt, compose hydrogeologic unit 1; younger rocks, primarily of massive, less densely fractured basalt, compose hydrogeologic unit 2; and intermediate-age rocks, primarily of slightly-to-moderately altered, fractured basalt, compose hydrogeologic unit 3. Differences in hydraulic properties among adjacent hydrogeologic units result in much of the large-scale heterogeneity and anisotropy of the aquifer in the model area, and differences in horizontal and vertical hydraulic conductivity in individual hydrogeologic units result in much of the small-scale heterogeneity and anisotropy of the aquifer in the model area. The inferred three-dimensional geometry of the aquifer in the model area is very irregular. Its thickness generally increases from north to south and from west to east and is greatest south of the INL. The interpreted distribution of older rocks that underlie the aquifer indicates large changes in saturated thickness across the model area. The boundaries of the model include physical and artificial boundaries, and ground-water flows across the boundaries may be temporally constant or variable and spatially uniform or nonuniform. Physical boundaries include the water-table boundary, base of the aquifer, and northwest mountain-front boundary. Artificial boundaries include the northeast boundary, southeast-flowline boundary, and southwest boundary. Water flows into the model area as (1) underflow (1,225 cubic feet per second (ft3/s)) from the regional aquifer (northeast boundary-constant and nonuniform), (2) underflow (695 ft3/s) from the tributary valleys and mountain fronts (northwest boundary-constant and nonuniform), (3) precipitation recharge (70 ft3/s) (constant and uniform), streamflow-infiltration recharge (95 ft3/s) (variable and nonuniform), wastewater return flows (6 ft3/s) (variable and nonuniform), and irrigation-infiltration recharge (24 ft3/s) (variable and nonuniform) across the water table (water-table boundary-variable and nonuniform), and (4) upward flow across the base of the aquifer (44 ft3/s) (uniform and constant). The southeast-flowline boundary is represented as a no-flow boundary. Water flows out of the model area as underflow (2,037 ft3/s) to the regional aquifer (southwest boundary-variable and nonuniform) and as ground-water withdrawals (45 ft3/s) (water table boundary-variable and nonuniform). Ground-water flow i

Scientific Investigations Report↗

USGS1978

Plan of study for the High Plains regional aquifer-system analysis in parts of Colorado, Kansas, Nebraska, New Mexico, Oklahoma, South Dakota, Texas, and Wyoming

The Ogallala Formation and associated Tertiary and Quarternary deposits form the principal aquifers supporting irrigation in the High Plains of Colorado, Kansas, Nebraska, New Mexico, Oklahoma, South Dakota, Texas, and Wyoming. The volume of water in storage within the aquifers is declining in most of the High Plains because water is being withdrawn in excess of the rate of replenishment. The U.S. Geological Survey has initiated a 5-year study of the High Plains aquifer system to develop the geohydrologic data base and computer models of the ground-water flow system needed to evaluate the response of the aquifer,system to ground-water management alternatives. This report describes the objectives, plan, and organization of the study and outlines the work to be accomplished in each state in the study area.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma, ↗

USGS1984

Water quality of a stream-aquifer system, southern Franklin County, Ohio

The chemical quality of the water resources in the Scioto River valley south of Columbus, Ohio, was evaluated on the basis of data collected from 74 wells and 4 surface-water sites. A very hard calcium bicarbonate water that is high in dissolved solids is characteristic of the aquifer. Mean pH of the ground water is 7.3, and bicaerbonate concentrations range from 238 to 530 milligrams per liter. Concentrations of dissolved iron in water samples (0.01 to 3.9 milligrams per liter) frequently exceed the drinking water standard of 0.3 milligrams per liter established by the Ohio Environmental Protection Agency. The chemical quality of local streams closely resembles the ground-water quality, except for higher concentrations of sodium, chloride, and sulfate in the surface water. Microbiological testing of ground water for fecal bacteria indicated concentrations ranging from 1 to 2,400 colonies per 100 milliliters. The higher concentrations were observed in one well on the Scioto River flood plain after a flood event. Mass-balance calculations of the chemical data indicate that pH is buffered primarily by the carbonate system. Data for pH, calculated Eh, and concentrations of ferrous iron and reduced sulfur show that areas of different chemical environments exist within the aquifer. A reaction model of an induced-infiltration radial collector system indicates the amount of mass transfer (chemical reactions that occur as ground water and surface water mix) is small, and that the mixing ratio between ground and surface waters is four to one.

Water-Resources Investigations Report↗

USGS1996

Relations of nonpoint-source nitrate and atrazine concentrations in the High Plains aquifer to selected explanatory variables in six Nebraska study areas

Statistical techniques were used to relate nonpoint-source ground-water contamination by nitrate and atrazine to a variety of explanatory variables for six study areas in Nebraska. Water samples were collected from 268 wells in 12 counties from 1984 through 1987 and were analyzed for nitrate concentrations; water samples from 210 of the wells were analyzed for atrazine. A number of hydrochemical, climatic, hydrologic, soil, and land-use explanatory variables, which were believed to affect the contamination of ground water by agricultural chemicals, were identified and quantified for each of the 268 wells. Multiple regression methods were used to determine which explanatory variables were statistically related to ground-water concentrations of nitrate and atrazine. Regression models predicting nitrate and atrazine concentrations were produced that explained from about 50 to 68 percent of the variation in the dependent variables. Geographic- information-system methods were used to produce maps predicting nitrate and atrazine concentrations in ground water for one study area using selected regression and logistic models. The results of this study indicate that multiple regression techniques coupled with geographic information systems can be an effective means of identifying areas of potential ground-water contamination by nitrate and atrazine.

Water-Resources Investigations Report↗

USGS2000

Ground-water quality in the Appalachian Plateaus, Kanawha River basin, West Virginia

Water samples collected from 30 privately-owned and small public-supply wells in the Appalachian Plateaus of the Kanawha River Basin were analyzed for a wide range of constituents, including bacteria, major ions, nutrients, trace elements, radon, pesticides, and volatile organic compounds. Concentrations of most constituents from samples analyzed did not exceed U.S. Environmental Protection Agency (USEPA) standards. Constituents that exceeded drinking-water standards in at least one sample were total coliform bacteria, Escherichia coli (E. coli) , iron, manganese, and sulfate. Total coliform bacteria were present in samples from five sites, and E. coli were present at only one site. USEPA secondary maximum contaminant levels (SMCLs) were exceeded for three constituents -- sulfate exceeded the SMCL of 250 mg/L (milligrams per liter) in samples from 2 of 30 wells; iron exceeded the SMCL of 300 µg/L (micrograms per liter) in samples from 12 of the wells, and manganese exceeded the SMCL of 50 µg/L in samples from 17 of the wells sampled. None of the samples contained concentrations of nutrients that exceeded the USEPA maximum contaminant levels (MCLs) for these constituents. The maximum concentration of nitrate detected was only 4.1 mg/L, which is below the MCL of 10 mg/L. Concentrations of nitrate in precipitation and shallow ground water are similar, potentially indicating that precipitation may be a source of nitrate in shallow ground water in the study area. Radon concentrations exceeded the recently proposed maximum contaminant level of 300 pCi/L at 50 percent of the sites sampled. The median concentration of radon was only 290 pCi/L. Radon-222 is a naturally occurring, carcinogenic, radioactive decay product of uranium. Concentrations, however, did not exceed the alternate maximum contaminant level (AMCL) for radon of 4,000 pCi/L in any of the 30 samples. Arsenic concentrations exceeded the proposed MCL of 5µg/L at 4 of the 30 sites. No samples exceeded the current MCL of 50 µg/L. Neither pesticides nor volatile organic compounds (VOCs) were prevalent in the study area, and the concentrations of the compounds that were detected did not exceed any USEPA MCLs. Pesticides were detected in only two of the 30 wells sampled, but four pesticides -- atrazine, carbofuran, DCPA, and deethylatrazine -- were detected in one well; molinate was detected in the other well. All of the pesticides detected were at estimated concentrations of only 0.002 µg/L. Of the VOCs detected, trihalomethane compounds (THMs), which can result from chlorination of a well, were the most common. THMs were detected in 13 of the 30 wells sampled. Gasoline by-products, such as benzene, toluene, ethylbenzene and xylene (BTEX compounds) were detected in 10 of the 30 wells sampled. The maximum concentration of any of the VOCs detected in this study, however, was only 1.040 µg/L, for the THM dichlorofluoromethane. Water samples from 25 of the wells were analyzed for chlorofluorocarbons (CFCs) to estimate the apparent age of ground water. The analyses indicated that age of water ranged from 10 to greater than 57 years, and that the age of ground water could be correlated with the topographic setting of the wells sampled. Thus the apparent age of water in wells on hilltops was youngest (median of 13 years) and that of water in wells in valleys was oldest (median of 42 years). Water from wells on hillsides was intermediate in age (median of 29 years). These data can be used to define contributing areas to wells, corroborate or revise conceptual ground-water flow models, estimate contaminant travel times from spills to other sources such as nearby domestic or public supply wells, and to manage point and nonpoint source activities that may affect critical aquifers.

West Virginia↗

USGS2005

Hydrogeologic framework, ground-water quality, and simulation of ground-water flow at the Fair Lawn Well Field Superfund site, Bergen County, New Jersey

Production wells in the Westmoreland well field, Fair Lawn, Bergen County, New Jersey (the 'Fair Lawn well field Superfund site'), are contaminated with volatile organic compounds, particularly trichloroethylene, tetrachloroethylene, and 1,1,1-trichloroethane. In 1983, the U.S. Environmental Protection Agency (USEPA) placed the Westmoreland well field on its National Priority List of Superfund sites. In an effort to determine ground-water flow directions, contaminant-plume boundaries, and contributing areas to production wells in Fair Lawn, and to evaluate the effect of present pump-and-treat systems on flowpaths of contaminated ground water, the U.S. Geological Survey (USGS), in cooperation with the USEPA, developed a conceptual hydrogeologic framework and ground-water flow model of the study area. MODFLOW-2000, the USGS three-dimensional finite-difference model, was used to delineate contributing areas to production wells in Fair Lawn and to compute flowpaths of contaminated ground water from three potential contaminant sources to the Westmoreland well field. Straddle-packer tests were used to determine the hydrologic framework of, distribution of contaminants in, and hydrologic properties of water-bearing and confining units that make up the fractured-rock aquifer underlying the study area. The study area consists of about 15 square miles in and near Fair Lawn. The area is underlain by 6 to 100 feet of glacial deposits and alluvium that, in turn, are underlain by the Passaic Formation. In the study area, the Passaic Formation consists of brownish-red pebble conglomerate, medium- to coarse-grained feldspathic sandstone, and micaceous siltstone. The bedrock strata strike N. 9o E. and dip 6.5o to the northwest. The bedrock consists of alternating layers of densely fractured rocks and sparsely fractured rocks, forming a fractured-rock aquifer. Ground-water flow in the fractured-rock aquifer is anisotropic as a result of the interlayering of dipping water-bearing and confining units. Wells of similar depth aligned along the strike of the bedding intersect the same water-bearing units, but wells aligned along the dip of the bedding may intersect different water-bearing units. Consequently, wells aligned along strike are in greater hydraulic connection than wells aligned along dip. The Borough of Fair Lawn pumps approximately 770 million gallons per year from 13 production wells. Hydrographs from six observation wells ranging in depth from 162 to 505 feet in Fair Lawn show that water levels in much of the study area are affected by pumping. Straddle packers were used to isolate discrete intervals within six open-hole observation wells owned by the Fair Lawn Water Department. Transmissivity, water-quality, and static-water-level data were obtained from the isolated intervals. Measured transmissivity ranged from near 0 to 8,900 feet squared per day. The broad range in measured transmissivity is a result of the heterogeneity of the fractured-rock aquifer. Eight water-bearing units and eight confining units were identified in the study area on the basis of transmissivity. The water-bearing units range in thickness from 21 to 95 feet; the mean thickness is 50 feet. The confining units range in thickness from 22 to 248 feet; the mean thickness is 83 feet. Water-level and water-quality data indicate effective separation of water-bearing units by the confining units. Water-quality samples were collected from the six observation wells at 16 depth intervals isolated by the straddle packers in 2000 and 2001. Concentrations of volatile organic compounds generally were low in samples from four of the wells, but were higher in samples from a well in Fair Lawn Industrial Park and in a well in the Westmoreland well field. The digital ground-water flow model was used to simulate steady-state scenarios representing conditions in the study area in 1991 and 2000. These years were chosen because during the intervening period,

Scientific Investigations Report↗

USGS1995

Analysis of steady-state flow and advective transport in the eastern Snake River Plain aquifer system, Idaho

Quantitative estimates of ground-water flow directions and traveltimes for advective flow were developed for the regional aquifer system of the eastern Snake River Plain, Idaho. The work included: (1) descriptions of compartments in the aquifer that function as intermediate and regional flow systems, (2) descriptions of pathlines for flow originating at or near the water table, and (3) quantitative estimates of traveltimes for advective transport originating at or near the water table. A particle-tracking postprocessing program was used to compute pathlines on the basis of output from an existing three-dimensional steady-state flow model. The flow model uses 1980 conditions to approximate average annual conditions for 1950-80. The advective transport model required additional information about the nature of flow across model boundaries, aquifer thickness, and porosity. Porosity of two types of basalt strata has been reported for more than 1,500 individual cores from test holes, wells, and outcrops near the south side of the Idaho National Engineering Laboratory. The central 80 percent of samples had porosities of 0.08 to 0.25, the central 50 percent of samples, O. 11 to 0.21. Calibration of the model involved choosing a value for porosity that yielded the best solution. Two radiologic contaminants, iodine-129 and tritium, both introduced to the flow system about 40 years ago, are relatively conservative tracers. Iodine- 129 was considered to be more useful because of a lower analytical detection limit, longer half-life, and longer flow path. The calibration value for porosity was 0.21. Most flow in the aquifer is contained within a regional-scale compartment and follows paths that discharge to the Snake River downstream from Milner Dam. Two intermediate-scale compartments exist along the southeast side of the aquifer and near Mud Lake.One intermediate-scale compartment along the southeast side of the aquifer discharges to the Snake River near American Fails Reservoir and covers an area of nearly 1,000 square miles. This compartment, which receives recharge from an area of intensive surface-water irrigation, is apparently fairly stable. The other intermediate-scale compartment near Mud Lake covers an area of 300 square miles. The stability and size of this compartment are uncertain, but are assumed to be in a state of change. Traveltimes for advective flow from the water table to discharge points in the regional compartment ranged from 12 to 350 years for 80 percent of the particles; in the intermediate-scale flow compartment near American Falls Reservoir, from 7 to 60 years for 80 percent of the particles; and in the intermediate-scale compartment near Mud Lake, from 25 to 100 years for 80 percent of the particles. Traveltimes are sensitive to porosity and assumptions regarding the importance of the strength of internal sinks, which represent ground-water pumpage. A decrease in porosity results in shorter traveltimes but not a uniform decrease in traveltime, because the porosity and thickness is different in each model layer. Most flow was horizontal and occurred in the top 500 feet of the aquifer. An important limitation of the model is the assumption of steady-state flow. The most recent trend in the flow system has been a decrease in recharge since 1987 because of an extended drought and changes in land use. A decrease in flow through the system will result in longer traveltimes than those predicted for a greater flow. Because the interpretation of the model was limited to flow on a larger scale, and did not consider individual wells or well fields, the interpretations were not seriously limited by the discretization of well discharge. The interpretations made from this model also were limited by the discretization of the major discharge areas. Near discharge areas, pathlines might not be representative at the resolution of the grid. Most improvement in the estimates of ground-waterflow directions and travelt

Water-Resources Investigations Report↗

USGS2006

StreamVOC - A deterministic source-apportionment model to estimate volatile organic compound concentrations in rivers and streams

This report documents the construction and verification of the model, StreamVOC, that estimates (1) the time- and position-dependent concentrations of volatile organic compounds (VOCs) in rivers and streams as well as (2) the source apportionment (SA) of those concentrations. The model considers how different types of sources and loss processes can act together to yield a given observed VOC concentration. Reasons for interest in the relative and absolute contributions of different sources to contaminant concentrations include the need to apportion: (1) the origins for an observed contamination, and (2) the associated human and ecosystem risks. For VOCs, sources of interest include the atmosphere (by absorption), as well as point and nonpoint inflows of VOC-containing water. Loss processes of interest include volatilization to the atmosphere, degradation, and outflows of VOC-containing water from the stream to local ground water. This report presents the details of StreamVOC and compares model output with measured concentrations for eight VOCs found in the Aberjona River at Winchester, Massachusetts. Input data for the model were obtained during a synoptic study of the stream system conducted July 11-13, 2001, as part of the National Water-Quality Assessment (NAWQA) Program of the U.S. Geological Survey. The input data included a variety of basic stream characteristics (for example, flows, temperature, and VOC concentrations). The StreamVOC concentration results agreed moderately well with the measured concentration data for several VOCs and provided compound-dependent SA estimates as a function of longitudinal distance down the river. For many VOCs, the quality of the agreement between the model-simulated and measured concentrations could be improved by simple adjustments of the model input parameters. In general, this study illustrated: (1) the considerable difficulty of quantifying correctly the locations and magnitudes of ground-water-related sources of contamination in streams; and (2) that model-based estimates of stream VOC concentrations are likely to be most accurate when the major sources are point sources or tributaries where the spatial extent and magnitude of the sources are tightly constrained and easily determined.

Scientific Investigations Report↗