SEARCH · Geology Reports

Results for “Geology in China”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources

USGS1964

Hydrogeologic reconnaissance of Poro Point and vicinity, Luzon Island, Philippines

In 1961 a reconnaissance of the geology and ground-water hydrology of Poro Point, on the west coast of Luzon Island, Philippines, was made on behalf of the U.S. Department of the Navy. Poro Point, which marks the northern end of Lingayen Gulf, is about half a mile wide and projects northwestward about 2 miles into the China Sea. The point is underlain by coralline limestone of probable Pleistocene age. The aquifer system consists of a fresh-water lens floating on salt water within the coralline limestone. Several tube wells obtain fresh water from the lens, but in May, at the end of the 6-month dry season during which rainfall totals only 40 inches, the water becomes brackish. 'Skimming wells' are considered the best method of obtaining fresh water from the lens, whose annual range in average thickness is probably 25 to 40 feet. Recharge is about 2,000-3,000 acre-feet per year and is derived wholly from precipitation during the 6-month wet season in which rainfall totals about 92 inches. The approximate amount of ground water stored in the fresh-water lens ranges from about 3,000 acre-feet at the end of the dry season to about 5,000 acre-feet at the end of the wet season. Most of the ground water is discharged through seeps and submarine springs around Poro Point; pumpage in 1961 was only about 100 acre-feet.

Water Supply Paper↗

USGS2007

Proceedings for a workshop on deposit modeling, mineral resource assessment, and their role in sustainable development

The world's use of nonfuel mineral resources continues to increase to support a growing population and increasing standards of living. The ability to meet this increasing demand is affected especially by concerns about possible environmental degradation associated with minerals production and by competing land uses. What information does the world need to support global minerals development in a sustainable way? Informed planning and decisions concerning sustainability and future mineral resource supply require a long–term perspective and an integrated approach to resource, land use, economic, and environmental management worldwide. Such perspective and approach require unbiased information on the global distribution of identified and especially undiscovered resources, the economic and political factors influencing their development, and the potential environmental consequences of their exploitation. The U.S. Geological Survey and the former Deposit Modeling Program of the International Union of Geological Sciences (IUGS) of the United Nations Educational, Scientific and Cultural Organization (UNESCO) sponsored a workshop on "Deposit Modeling, Mineral Resource Assessment, and Their Role in Sustainable Development" at the 31st International Geological Congress (IGC) in Rio de Janeiro, Brazil, on August 18–19, 2000. The purpose of the workshop was to review the state-of-the-art in mineral deposit modeling and resource assessment and to examine the role of global assessments of nonfuel mineral resources in sustainable development. The workshop addressed questions such as the following: Which of the available mineral deposit models and assessment methods are best suited for predicting the locations, deposit types, and amounts of undiscovered nonfuel mineral resources remaining in the world? What is the availability of global geologic, mineral deposit, and mineral exploration information? How can mineral resource assessments be used to address economic and environmental issues? Presentations included overviews of assessment methods applied in previous national and other small-scale assessments of large regions and of the resulting assessment products and their uses. Twenty-seven people from Canada, China, Finland, Germany, Japan, Peru, Slovenia, South Africa, United States, and Venezuela participated in the 2-day post-Congress workshop. The attendees represented academia, government, environmental organizations, and the mining industry.

Circular↗

USGS2004

Geologic map of the Peach Orchard Flat quadrangle, Carbon County, Wyoming, and descriptions of new stratigraphic units in the Upper Cretaceous Lance Formation and Paleocene Fort Union Formation, eastern Greater Green River Basin, Wyoming-Colorado

This report provides a geologic map of the Peach Orchard Flat 7.5-minute quadrangle, located along the eastern flank of the Washakie Basin, Wyo. Geologic formations and individual coal beds were mapped at a scale of 1:24,000; surface stratigraphic sections were measured and described; and well logs were examined to determine coal correlations and thicknesses in the subsurface. In addition, four lithostratigraphic units were named: the Red Rim Member of the Upper Cretaceous Lance Formation, and the China Butte, Blue Gap, and Overland Members of the Paleocene Fort Union Formation.

Wyoming↗

USGS1982

Applications of Landsat imagery to problems of petroleum exploration in Qaidam Basin, China

Tertiary and Quaternary nonmarine, petroleum-bearing sedimentary rocks in the Qaidam basin of remote western China have been extensively deformed by compressive forces. These forces created many folds which are current targets of Chinese exploration programs. Manual techniques of image analysis and interpretation were applied to computer-enhanced Landsat images of the western part of the Qaidam basin in an effort to evaluate the contributions of Landsat imagery in defining the geologic conditions of the basin and to determine its usefulness as an exploration tool in the region. Most success was realized in defining the structural geologic setting of the region. Image-derived interpretations of folds, strike-slip faults, thrust faults, normal or reverse faults, and fractures compared very favorably, in terms of locations and numbers mapped, with Chinese data compiled from years of extensive field mapping. The image studies resulted in the identification of at least one subsurface fold that had not been detected by field mapping. The results of this study have direct exploration significance. Many potential hydrocarbon trapping structures were precisely located and information was obtained that may have significant implications with respect to fluid migration or attempts to locate offset reservoirs and buried folds. In addition, the orientations of major structural trends defined from Landsat imagery correlate well with those predicted for the area based on global tectonic theory. These correlations suggest that similar orientations exist in the eastern half of the basin where folded rocks are mostly obscured by unconsolidated surface sediments and where limited exploration has occurred.

Qaidam Basin↗

USGS2006

Geologic map and coal stratigraphy of the Doty Mountain quadrangle, eastern Washakie basin, Carbon County, Wyoming

This report provides a geologic map of the Doty Mountain 7.5-minute quadrangle, located along the eastern flank of the Washakie Basin, Wyo. Geologic formations and individual coal beds were mapped at a scale of 1:24,000; surface stratigraphic sections were measured and described; and well logs were examined to determine coal correlations and thicknesses in the subsurface. Detailed measured sections are provided for the type sections of the Red Rim Member of the Upper Cretaceous Lance Formation and China Butte and Overland Members of the Paleocene Fort Union Formation. The data set was collected as part of a larger effort to acquire data on Upper Cretaceous and Tertiary coal-bearing rocks in the eastern Washakie Basin and southeastern Great Divide Basin. Regions in the eastern Washakie Basin and southeastern Great Divide Basin have potential for coal development and were considered previously for coal leasing by the U.S. Bureau of Land Management.

Scientific Investigations Map↗

USGS2013

Historical methane hydrate project review

In 1995, U.S. Geological Survey made the first systematic assessment of the volume of natural gas stored in the hydrate accumulations of the United States. That study, along with numerous other studies, has shown that the amount of gas stored as methane hydrates in the world greatly exceeds the volume of known conventional gas resources. However, gas hydrates represent both a scientific and technical challenge and much remains to be learned about their characteristics and occurrence in nature. Methane hydrate research in recent years has mostly focused on: (1) documenting the geologic parameters that control the occurrence and stability of gas hydrates in nature, (2) assessing the volume of natural gas stored within various gas hydrate accumulations, (3) analyzing the production response and characteristics of methane hydrates, (4) identifying and predicting natural and induced environmental and climate impacts of natural gas hydrates, and (5) analyzing the effects of methane hydrate on drilling safety. Methane hydrates are naturally occurring crystalline substances composed of water and gas, in which a solid water-‐lattice holds gas molecules in a cage-‐like structure. The gas and water becomes a solid under specific temperature and pressure conditions within the Earth, called the hydrate stability zone. Other factors that control the presence of methane hydrate in nature include the source of the gas included within the hydrates, the physical and chemical controls on the migration of gas with a sedimentary basin containing methane hydrates, the availability of the water also included in the hydrate structure, and the presence of a suitable host sediment or “reservoir”. The geologic controls on the occurrence of gas hydrates have become collectively known as the “methane hydrate petroleum system”, which has become the focus of numerous hydrate research programs. Recognizing the importance of methane hydrate research and the need for a coordinated effort, the U.S. Congress enacted Public Law 106-‐193, the Methane Hydrate Research and Development Act of 2000. This Act called for the Secretary of Energy to begin a methane hydrate research and development program in consultation with other U.S. federal agencies. At the same time a new methane hydrate research program had been launched in Japan by the Ministry of International Trade and Industry to develop plans for a methane hydrate exploratory drilling project in the Nankai Trough. Since this early start we have seen other countries including India, China, Canada, and the Republic of Korea establish large gas hydrate research and development programs. These national led efforts have also included the investment in a long list of important scientific research drilling expeditions and production test studies that have provided a wealth of information on the occurrence of methane hydrate in nature. The most notable expeditions and projects have including the following: -‐Ocean Drilling Program Leg 164 (1995) -‐Japan Nankai Trough Project (1999-‐2000) -‐Ocean Drilling Program Leg 204 (2004) -‐Japan Tokai-‐oki to Kumano-‐nada Project (2004) -‐Gulf of Mexico JIP Leg I (2005) -‐Integrated Ocean Drilling Program Expedition 311 (2005) -‐Malaysia Gumusut-‐Kakap Project (2006) -‐India NGHP Expedition 01 (2006) -‐China GMGS Expedition 01 (2007) -‐Republic of Korea UBGH Expedition 01 (2007) -‐Gulf of Mexico JIP Leg II (2009) -‐Republic of Korea UBGH Expedition 02 (2010) -‐MH-‐21 Nankai Trough Pre-‐Production Expedition (2012-‐2013) -‐Mallik Gas Hydrate Testing Projects (1998/2002/2007-‐2008) -‐Alaska Mount Elbert Stratigraphic Test Well (2007) -‐Alaska Iġnik Sikumi Methane Hydrate Production Test Well (2011-‐2012) Research coring and seismic programs carried out by the Ocean Drilling Program (ODP) and Integrated Ocean Drilling Program (IODP), starting with the ODP Leg 164 drilling of the Blake Ridge in the Atlantic Ocean in 1995, have also contributed greatly to our understanding of the geologic controls on the formation, occurrence, and stability of gas hydrates in marine environments. For the most part methane hydrate research expeditions carried out by the ODP and IODP provided the foundation for our scientific understanding of gas hydrates. The methane hydrate research efforts under ODP-‐IODP have mostly dealt with the assessment of the geologic controls on the occurrence of gas hydrate, with a specific goal to study the role methane hydrates may play in the global carbon cycle. Over the last 10 years, national led methane hydrate research programs, along with industry interest have led to the development and execution of major methane hydrate production field test programs. Two of the most important production field testing programs have been conducted at the Mallik site in the Mackenzie River Delta of Canada and in the Eileen methane hydrate accumulation on the North Slope of Alaska. Most recently we have also seen the completion of the world’s first marine methane hydrate production test in the Nankai Trough in the offshore of Japan. Industry interest in gas hydrates has also included important projects that have dealt with the assessment of geologic hazards associated with the presence of hydrates. The scientific drilling and associated coring, logging, and borehole monitoring technologies developed in the long list of methane hydrate related field studies are one of the most important developments and contributions associated with methane hydrate research and development activities. Methane hydrate drilling has been conducted from advanced scientific drilling platforms like the JOIDES Resolution and the D/V Chikyu, which feature highly advanced integrated core laboratories and borehole logging capabilities. Hydrate research drilling has also included the use of a wide array of industry, geotechnical and multi-‐service ships. All of which have been effectively used to collect invaluable geologic and engineering data on the occurrence of methane hydrates throughout the world. Technologies designed specifically for the collection and analysis of undisturbed methane hydrate samples have included the development of a host of pressure core systems and associated specialty laboratory apparatus. The study and use of both wireline conveyed and logging-‐while-‐drilling technologies have also contributed greatly to our understanding of the in-‐situ nature of hydrate-‐bearing sediments. Recent developments in borehole instrumentation specifically designed to monitor changes associated with hydrates in nature through time or to evaluate the response of hydrate accumulations to production have also contributed greatly to our understanding of the complex nature and evolution of methane hydrate systems. Our understanding of how methane hydrates occur and behave in nature is still growing and evolving – we do not yet know if methane hydrates can be economically produced, nor do we know fully the role of hydrates as an agent of climate change or as a geologic hazard. But it is known for certain that scientific drilling has contributed greatly to our understanding of hydrates in nature and will continue to be a critical source of the information to advance our understanding of methane hydrates.

Report↗

USGS2007

Nature, diversity of deposit types and metallogenic relations of South China

The South China Region is rich in mineral resources and has a wide diversity of deposit types. The region has undergone multiple tectonic and magmatic events and related metallogenic processes throughout the earth history. These tectonic and metallogenic processes were responsible for the formation of the diverse styles of base and precious metal deposits in South China making it one of the resource-rich regions in the world. During the Proterozoic, the South China Craton was characterised by rifting of continental margin before eruption of submarine volcanics and development of platform carbonate rocks, and the formation of VHMS, stratabound copper and MVT deposits. The Phanerozoic metallogeny of South China was related to opening and closing of the Tethyan Ocean involving multiple orogenies by subduction, back-arc rifting, arc-continent collision and post-collisional extension during the Indosinian (Triassic), Yanshanian (Jurassic to Cretaceous) and Himalayan (Tertiary) Orogenies. The Late Palaeozoic was a productive metallogenic period for South China resulting from break-up and rifting of Gondwana. Significant stratabound base and precious metal deposits were formed during the Devonian and Carboniferous (e.g., Fankou and Dabaoshan deposits). These Late Palaeozoic SEDEX-style deposits have been often overprinted by skarn systems associated with Yanshanian magmatism (e.g., Chengmenshan, Dongguashan and Qixiashan). A number of Late Palaeozoic to Early Mesozoic VHMS deposits also developed in the Sanjiang fold belt in the western part of South China (e.g., Laochang and Gacun). South China has significant sedimentary rock-hosted Carlin-like deposits, which occur in the Devonian- to Triassic-aged accretionary wedge or rift basins at the margin of the South China Craton. They are present in a region at the junction of Yunnan, Guizhou, and Guangxi Provinces called the 'Southern Golden Triangle', and are also present in NW Sichuan, Gansu and Shaanxi, in an area known as the 'Northern Golden Triangle' of China. These deposits are mostly epigenetic hydrothermal micron-disseminated gold deposits with associated As, Hg, Sb + Tl mineralisation similar to Carlin-type deposits in USA. The important deposits in the Southern Golden Triangle are Jinfeng (Lannigou), Zimudang, Getang, Yata and Banqi in Guizhou Province, and the Jinya and Gaolong deposits in Guangxi District. The most important deposits in the Northern Golden Triangle are the Dongbeizhai and Qiaoqiaoshang deposits. Many porphyry-related polymetallic copper-lead-zinc and gold skarn deposits occur in South China. These deposits are related to Indosinian (Triassic) and Yanshanian (Jurassic to Cretaceous) magmatism associated with collision of the South China and North China Cratons and westward subduction of the Palaeo-Pacific Plate. Most of these deposits are distributed along the Lower to Middle Yangtze River metallogenic belt. The most significant deposits are Tonglushan, Jilongshan, Fengshandong, Shitouzui and Jiguanzui. Au-(Ag-Mo)-rich porphyry-related Cu-Fe skarn deposits are also present (Chengmenshan and Wushan in Jiangxi Province and Xinqiao, Mashan-Tianmashan, Shizishan and Huangshilaoshan in Anhui Province). The South China fold belt extending from Fujian to Zhejiang Provinces is characterised by well-developed Yanshanian intrusive to subvolcanic rocks associated with porphyry to epithermal type mineralisation and mesothermal vein deposits. The largest porphyry copper deposit in China, Dexing, occurs in Jiangxi Province and is hosted by Yanshanian granodiorite. The high-sulphidation epithermal system occurs at the Zijinshan district in Fujian Province and epithermal to mesothermal vein-type deposits are also found in the Zhejiang Province (e.g., Zhilingtou). Part of Shandong Province is located at the northern margin of the South China Craton and the province has unique world class granite-hosted orogenic gold deposits. Occurrences of Pt-Pd-Ni-Cu-Co are found in Permian

Ore Geology Reviews↗

USGS2002

Petroleum systems of the Malay Basin Province, Malaysia

The offshore Malay Basin province is a Tertiary oil and gas province composed of a complex of half grabens that were filled by lacustrine shales and continental clastics.These deposits were overlain by clastics of a large delta system that covered the basin.Delta progradation was interupted by transgressions of the South China Sea to the southeast, which finally flooded the basin to form the Gulf of Thailand.Oil and gas from the Oligocene to Miocene lacustrine shales and Miocene deltaic coals is trapped primarily in anticlines formed by inversion of the half grabens during the late Miocene.Hydrocarbon reserves that have been discovered amount to 12 billion barrels of oil equivalent.The U.S. Geological Survey assessment of the estimated quantities of conventional oil, gas and condensate that have the potential to be added to reserves by the year 2025 for this province is 6.3 billion barrels of oil equivalent (BBOE) (U. S. Geological Survey World Energy Assessment Team, 2000).

Basin Province↗

USGS2011

Rapid estimation of the economic consequences of global earthquakes

The U.S. Geological Survey's (USGS) Prompt Assessment of Global Earthquakes for Response (PAGER) system, operational since mid 2007, rapidly estimates the most affected locations and the population exposure at different levels of shaking intensities. The PAGER system has significantly improved the way aid agencies determine the scale of response needed in the aftermath of an earthquake. For example, the PAGER exposure estimates provided reasonably accurate assessments of the scale and spatial extent of the damage and losses following the 2008 Wenchuan earthquake (Mw 7.9) in China, the 2009 L'Aquila earthquake (Mw 6.3) in Italy, the 2010 Haiti earthquake (Mw 7.0), and the 2010 Chile earthquake (Mw 8.8). Nevertheless, some engineering and seismological expertise is often required to digest PAGER's exposure estimate and turn it into estimated fatalities and economic losses. This has been the focus of PAGER's most recent development. With the new loss-estimation component of the PAGER system it is now possible to produce rapid estimation of expected fatalities for global earthquakes (Jaiswal and others, 2009). While an estimate of earthquake fatalities is a fundamental indicator of potential human consequences in developing countries (for example, Iran, Pakistan, Haiti, Peru, and many others), economic consequences often drive the responses in much of the developed world (for example, New Zealand, the United States, and Chile), where the improved structural behavior of seismically resistant buildings significantly reduces earthquake casualties. Rapid availability of estimates of both fatalities and economic losses can be a valuable resource. The total time needed to determine the actual scope of an earthquake disaster and to respond effectively varies from country to country. It can take days or sometimes weeks before the damage and consequences of a disaster can be understood both socially and economically. The objective of the U.S. Geological Survey's PAGER system is to reduce this time gap to more rapidly and effectively mobilize response. We present here a procedure to rapidly and approximately ascertain the economic impact immediately following a large earthquake anywhere in the world. In principle, the approach presented is similar to the empirical fatality estimation methodology proposed and implemented by Jaiswal and others (2009). In order to estimate economic losses, we need an assessment of the economic exposure at various levels of shaking intensity. The economic value of all the physical assets exposed at different locations in a given area is generally not known and extremely difficult to compile at a global scale. In the absence of such a dataset, we first estimate the total Gross Domestic Product (GDP) exposed at each shaking intensity by multiplying the per-capita GDP of the country by the total population exposed at that shaking intensity level. We then scale the total GDP estimated at each intensity by an exposure correction factor, which is a multiplying factor to account for the disparity between wealth and/or economic assets to the annual GDP. The economic exposure obtained using this procedure is thus a proxy estimate for the economic value of the actual inventory that is exposed to the earthquake. The economic loss ratio, defined in terms of a country-specific lognormal cumulative distribution function of shaking intensity, is derived and calibrated against the losses from past earthquakes. This report describes the development of a country or region-specific economic loss ratio model using economic loss data available for global earthquakes from 1980 to 2007. The proposed model is a potential candidate for directly estimating economic losses within the currently-operating PAGER system. PAGER's other loss models use indirect methods that require substantially more data (such as building/asset inventories, vulnerabilities, and the asset values exposed at the time of earthquake) to implement on a global basis and will thus take more time to develop and implement within the PAGER system.

Open-File Report↗

USGS2016

Rare earth element ore geology of carbonatites

For nearly 50 years, carbonatites have been the primary source of niobium and rare earth elements (REEs), in particular the light REEs, including La, Ce, Pr, and Nd. Carbonatites are a relatively rare type of igneous rock composed of greater than 50 vol % primary carbonate minerals, primarily calcite and/or dolomite, and contain the highest concentrations of REEs of any igneous rocks. Although there are more than 500 known carbonatites in the world, currently only four are being mined for REEs: the Bayan Obo, Maoniuping, and Dalucao deposits in China, and the Mountain Pass deposit in California, United States. The carbonatite-derived laterite deposit at Mount Weld in Western Australia is also a REE producer. In addition to REEs, carbonatite-related deposits are the primary source of Nb, with the Araxá deposit, a carbonatite-derived laterite in Minas Gerais state, Brazil, being the dominant producer. Other commodities produced from carbonatite-related deposits include phosphates, iron, fluorite, copper, vanadium, titanium, uranium, and calcite. Types of ores include those formed as primary magmatic minerals, from late magmatic hydrothermal fluids, and by supergene enrichment in weathered horizons. Although the principal REE-bearing mineral phases include fluorocarbonates (bastnäsite, parisite, and synchysite), hydrated carbonates (ancylite), and phosphates (monazite and apatite), the dominant mineral exploited at most mines is bastnäsite. Bastnäsite typically is coarse grained and contains approximately 75 wt % RE 2 O 3 (rare earth oxides; REOs). Processes responsible for REE enrichment include fractional crystallization of the carbonatitic magma, enrichment of REEs in orthomagmatic or hydrothermal fluids and subsequent precipitation or subsolidus metasomatic redistribution of REEs, and breakdown of primary carbonatitic mineral phases by chemical weathering and sequestration of REEs in secondary minerals or in association with clays. Carbonatites are primarily associated with continental rifting, but some carbonatites are associated with orogenic activity. Although there is debate on how carbonatite magmas are generated, the parental magma and REEs are clearly derived from mantle sources.

Book chapter↗

USGS2014

Mercury and halogens in coal

Apart from mercury itself, coal rank and halogen content are among the most important factors inherent in coal that determine the proportion of mercury captured by conventional controls during coal combustion. This chapter reviews how mercury in coal occurs, gives available concentration data for mercury in U.S. and international commercial coals, and provides an overview of the natural variation in halogens that influence mercury capture. Three databases, the U.S. Geological Survey coal quality (USGS COALQUAL) database for in-ground coals, and the 1999 and 2010 U.S. Environmental Protection Agency (EPA) Information Collection Request (ICR) databases for coals delivered to power stations, provide extensive results for mercury and other parameters that are compared in this chapter. In addition to the United States, detailed characterization of mercury is available on a nationwide basis for China, whose mean values in recent compilations are very similar to the United States in-ground mean of 0.17 ppm mercury. Available data for the next five largest producers (India, Australia, South Africa, the Russian Federation, and Indonesia) are more limited and with the possible exceptions of Australia and the Russian Federation, do not allow nationwide means for mercury in coal to be calculated. Chlorine in coal varies as a function of rank and correspondingly, depth of burial. As discussed elsewhere in this volume, on a proportional basis, bromine is more effective than chlorine in promoting mercury oxidation in flue gas and capture by conventional controls. The ratio of bromine to chlorine in coal is indicative of the proportion of halogens present in formation waters within a coal basin. This ratio is relatively constant except in coals that have interacted with deep-basin brines that have reached halite saturation, enriching residual fluids in bromine. Results presented here help optimize mercury capture by conventional controls and provide a starting point for implementation of mercury-specific controls discussed elsewhere in this volume.

Book chapter↗

USGS2021

Economic geology and environmental characteristics of antimony deposits

Antimony is commonly listed as a critical mineral, particularly in the United States and European Union [1]. Its criticality, or supply risk, is derived from a combination of economic vulnerability, disruption potential of supply, and trade exposure [2].Disruption potential relates a country’s ability and willingness to supply a commodity. Commodities for which supply is concentrated in the fewest countries have the greatest potential for supply disruption, trade exposure, and economic vulnerability. In 2018, approximately 61% of the world production of antimony was mined from China, followed by Russia (20%) and Tajikistan (10%) [3] (Fig. 3.1). Several reviews of antimony as a critical mineral have been recently published [4, 5]. The uses of antimony can be divided into three main categories: metal products, non-metal uses, and flame retardants [5]. Most metallic antimony use is inlead-acid batteries. Antimony trioxide (Sb 2 O 3 ) combined with halogenated com-pounds is used as a fire retardant in plastics, fabrics, and other applications. Other non-metallic uses include as a catalyst for plastics, and in the glass industry. Emerging uses include data storage and novel photovoltaic cells. Recycling of batteries represents an important reuse of antimony, but other uses of antimony do not lend themselves to recycling. This chapter describes mineral deposit types that are primary sources of antimony, and environmental effects related to their mining. Antimony can be re-covered as either a primary commodity from some deposits or as a by product commodity from some gold or silver deposits. Environmental risks associated with antimony mining include those related to mining in general, such as the acid-generating potential of solid mine waste, and some issues specific to antimony, as described below.

Book chapter↗

USGS2025

Proceedings of the 2024 Asia-Pacific Wildlife Health Workshop—Collaborating against shared threats

Emerging diseases of wildlife origin are increasingly transboundary (they spread rapidly across geographic regions and across continents). In recent years, examples include the rapid spread of African swine fever across Europe and Asia with negative effects on food security, and the near global spread of highly pathogenic avian influenza which has devastated wildlife populations, caused economic harm, and which threatens public health; consequently, international partnerships and networks are essential to facilitate the sharing of information for improved situational awareness and better preparedness and response. In this regard, the U.S. Geological Survey and the Korea National Institute for Wildlife Disease Control and Prevention have had a long-standing partnership to foster scientific collaboration. A key part of the activities has been annual scientific workshops, which commenced in 2016. The 2024 workshop in Hilo, Hawaii, was the most recent in these series of workshops and included participants from across Asia and the Pacific region, including Thailand, Vietnam, China, Republic of Korea, Japan, Australia, Cook Islands, Fiji, and the United States. The goals of the workshop were: to continue to build the wildlife health community of practice in the Asia-Pacific region and expand the participants to agencies and institutions from other countries in the region; and exchange scientific knowledge among the participants to share best practices, create scientific networks, and build capacity in wildlife health science for the Asia-Pacific region. The themes discussed at the workshop included wildlife health risk management, avian Influenza, African swine fever, climate change and emerging diseases, and international cooperation. This report contains the author-submitted abstracts which provide a summary of the presentations and discussions during the workshop. The aim is to share this information to continue to foster international scientific exchange to protect wildlife health, livestock, and public health from the negative impacts of infectious and noninfectious diseases.

Open-File Report↗

USGS2006

State summaries: Idaho

According to the United States Geological Survey (USGS), Idaho's preliminary nonfuel mineral production value jumped to $893 million in 2005. Principal minerals by value included molybdenum concentrates, phosphate rock, sand and gravel, silver and portland cement. The state ranked second in phosphate and garnet production, third in silver and pumice, fourth in molybdenum concentrate production, and 21st overall. Majority of mining increases for the year were spurred by demand for metals by China's growing economy.

Mining Engineering↗

USGS2010

Magmatic sulfide-rich nickel-copper deposits related to picrite and (or) tholeiitic basalt dike-sill complexes: A preliminary deposit model

Magmatic sulfide deposits containing nickel (Ni) and copper (Cu), with or without (±) platinum-group elements (PGEs), account for approximately 60 percent of the world’s Ni production and are active exploration targets in the United States and elsewhere. On the basis of their principal metal production, magmatic sulfide deposits in mafic rocks can be divided into two major types: those that are sulfide-rich, typically with 10 to 90 percent sulfide minerals, and have economic value primarily because of their Ni and Cu contents; and those that are sulfide-poor, typically with 0.5 to 5 percent sulfide minerals, and are exploited principally for PGE. Because the purpose of this deposit model is to facilitate the assessment for undiscovered, potentially economic magmatic Ni-Cu±PGE sulfide deposits in the United States, it addresses only those deposits of economic significance that are likely to occur in the United States on the basis of known geology. Thus, this model focuses on deposits hosted by small- to medium-sized mafic and (or) ultramafic dikes and sills that are related to picrite and tholeiitic basalt magmatic systems generally emplaced in continental settings as a component of large igneous provinces (LIPs). World-class examples (those containing greater than 1 million tons Ni) of this deposit type include deposits at Noril’sk-Talnakh (Russia), Jinchuan (China), Pechenga (Russia), Voisey’s Bay (Canada), and Kabanga (Tanzania). In the United States, this deposit type is represented by the Eagle deposit in northern Michigan, currently under development by Kennecott Minerals.

Open-File Report↗

USGS2014

Sediment-hosted gold deposits of the world: Database and grade and tonnage models

All sediment-hosted gold deposits (as a single population) share one characteristic—they all have disseminated micron-sized invisible gold in sedimentary rocks. Sediment-hosted gold deposits are recognized in the Great Basin province of the western United States and in China along with a few recognized deposits in Indonesia, Iran, and Malaysia. Three new grade and tonnage models for sediment-hosted gold deposits are presented in this paper: (1) a general sediment-hosted gold type model, (2) a Carlin subtype model, and (3) a Chinese subtype model. These models are based on grade and tonnage data from a database compilation of 118 sediment-hosted gold deposits including a total of 123 global deposits. The new general grade and tonnage model for sediment-hosted gold deposits (n=118) has a median tonnage of 5.7 million metric tonnes (Mt) and a gold grade of 2.9 grams per tonne (g/t). This new grade and tonnage model is remarkable in that the estimated parameters of the resulting grade and tonnage distributions are comparable to the previous model of Mosier and others (1992). A notable change is in the reporting of silver in more than 10 percent of deposits; moreover, the previous model had not considered deposits in China. From this general grade and tonnage model, two significantly different subtypes of sediment-hosted gold deposits are differentiated: Carlin and Chinese. The Carlin subtype includes 88 deposits in the western United States, Indonesia, Iran, and Malaysia, with median tonnage and grade of 7.1 Mt and 2.0 g/t Au, respectively. The silver grade is 0.78 g/t Ag for the 10th percentile of deposits. The Chinese subtype represents 30 deposits in China, with a median tonnage of 3.9 Mt and medium grade of 4.6 g/t Au. Important differences are recognized in the mineralogy and alteration of the two sediment-hosted gold subtypes such as: increased sulfide minerals in the Chinese subtype and decalcification alteration dominant in the Carlin type. We therefore recommend using the appropriate grade and tonnage model presented in this study for mineral resource assessments depending on the geologic and mineralogical data available for a region. Tonnage and contained gold within the general sediment-hosted gold model are analyzed based on major geologic features such as tectonic setting and magmatic (dikes, sills, and stocks) or amagmatic environment. The results show a significant difference in tonnage and contained gold, with higher median values in deposits spatially associated with igneous rocks, regardless of structural style of the deposit. These results suggest that magmatic environments control mineralization intensity—an important consideration in the regional assessment of prospective areas for sediment-hosted gold deposits.

Open-File Report↗

USGS1998

Genetic features of petroleum systems in rift basins of eastern China

Most oil-bearing basins in eastern China are Mesozoic-Cenozoic continental rifts which have played a habitat for oil and gas in China. Investigation of the petroleum systems may give a better understanding of the oil and gas habitats in these basins. Of the essential elements of the petroleum system, the source rock is the most important in rift basins. However, rift tectonic evolution controls all the essential elements and processes nevessary for a petroleum system. A four stage evolution model is suggested for the controls in the rift basin. A rift basin may consist of sub-basins, depressions, sub-depressions, and major, moderate, and minor uplifts. A depression or sub-depression has its own depocentre (mainly occupied by source rock) and all kinds of lacustrine sediments, and thus has all the essential elements of a petroleum system. However, only those depressions or sub-depressions which are rich in organic matter and deeply buried to generate oil and gas form petroleum systems. Immature oil, another characteristic, complicates the petroleum system in the rift basins. Three types of oil and gas habitats are described as a result of this analysis of the petroleum systems of the 26 largest oil and gas fields discovered in eastern China rift basins: uplifts between oil source centres are the most prospective areas for oil and gas accumulations, slopes connecting oil source centres and uplifts are the second, and the third type is subtle traps in the soil source centre.Most oil-bearing basins in eastern China are Mesozoic-Cenozoic continental rifts which have played a habitat for oil and gas in China. Investigation of the petroleum systems may give a better understanding of the oil and gas habitats in these basins. Of the essential elements of the petroleum system, the source rock is the most important in rift basins. However, rift tectonic evolution controls all the essential elements and processes necessary for a petroleum system. A four stage evolution model is suggested for the controls in the rift basin. A rift basin may consist of sub-basins, depressions, sub-depressions, and major, moderate, and minor uplifts. A depression or sub-depression has its own depocentre (mainly occupied by source rock) and all kinds of lacustrine sediments, and thus has all the essential elements of a petroleum system. However, only those depressions or sub-depressions which are rich in organic matter and deeply buried to generate oil and gas form petroleum systems. Immature oil, another characteristic, complicates the petroleum system in the rift basins. Three types of oil and gas habitats are described as a result of this analysis of the petroleum systems of the 26 largest oil and gas fields discovered in eastern China rift basins: uplifts between oil source centres are the most prospective areas for oil and gas accumulations, slopes connecting oil source centres and uplifts are the second, and the third type is subtle traps in the oil source centre.

Marine and Petroleum Geology↗

USGS2004

Digital files for northeast Asia geodynamics, mineral deposit location, and metallogenic belt maps, stratigraphic columns, descriptions of map units, and descriptions of metallogenic belts

This is the online version of a CD-ROM publication. It contains all of the data that are on the disc but extra files have been removed: index files, software installers, and Windows autolaunch files. This publication contains a a series of files for Northeast Asia geodynamics, mineral deposit location, and metallogenic belt maps descriptions of map units and metallogenic belts, and stratigraphic columns. This region includes Eastern Siberia, Russian Far East, Mongolia, Northeast China, South Korea, and Japan. The files include: (1) a geodynamics map at a scale of 1:5,000,000; (2) page-size stratigraphic columns for major terranes; (3) a generalized geodynamics map at a scale of 1:15,000,000; (4) a mineral deposit location map at a scale of 1:7,500,000; (5) metallogenic belt maps at a scale of 1:15,000,000; (6) detailed descriptions of geologic units with references; (7) detailed descriptions of metallogenic belts with references; and (8) summary mineral deposit and metallogenic belt tables. The purpose of this publication is to provide high-quality, digital graphic files for maps and figures, and Word files for explanations, descriptions, and references to customers and users.

Open-File Report↗