Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Engineering Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources

Geotechnical engineering for ocean waste disposal. An introduction

As members of multidisciplinary teams, geotechnical engineers apply quantitative knowledge about the behavior of earth materials toward designing systems for disposing of wastes in the oceans and monitoring waste disposal sites. In dredge material disposal, geotechnical engineers assist in selecting disposal equipment, predict stable characteristics of dredge mounds, design mound caps, and predict erodibility of the material. In canister disposal, geotechnical engineers assist in specifying canister configurations, predict penetration depths into the seafloor, and predict and monitor canister performance following emplacement. With sewage outfalls, geotechnical engineers design foundation and anchor elements, estimate scour potential around the outfalls, and determine the stability of deposits made up of discharged material. With landfills, geotechnical engineers evaluate the stability and erodibility of margins and estimate settlement and cracking of the landfill mass. Geotechnical engineers also consider the influence that pollutants have on the engineering behavior of marine sediment and the extent to which changes in behavior affect the performance of structures founded on the sediment. In each of these roles, careful application of geotechnical engineering principles can contribute toward more efficient and environmentally safe waste disposal operations.

Conference Paper↗

Prefabricated Zero Ascend Omnispecies (ZAO) modular fish passage modules using advanced manufacturing techniques

The Zero Ascend Omnispecies (ZAO) fish passage attraction module “ZAO Attractor” is a novel system designed to facilitate upstream passage for a broad spectrum of fish species, with a particular focus on American shad and river herring (alewife and/or blueback herring). Combining the use of prefabricated, modular components with advanced manufacturing, the ZAO aims to provide a cost-effective and scalable solution for fish passage attractions across various hydropower sites. The system features a surface level entry, so fish do not need to climb. In addition, it is designed to be adjusted and repositioned to create the most effective attraction flows by managing the outflows from hydropower turbines. Budget Period 1 (BP1) focused on the design and modeling of the ZAO Attractor and demonstrated the engineering feasibility of a modular, prefabricated, hydrodynamically efficient structure with surface level entry and passage. During BP1, the hypothesis was that certain structural adaptations, such as the addition of long fins, could direct turbine outflows to create a desirable downstream flow. Simulations, however, were inconclusive, revealing the complex nature of fish preferences for hydraulic conditions. It was discovered that there were limited published studies on the direct correlation between quantified flow patterns and fish attraction, emphasizing the need for controlled studies to observe and measure these effects. In Budget Period 2 (BP2), controlled studies with live fish were prioritized to address these complexities. A partially scaled ZAO Attractor was evaluated in laboratory conditions using native river water to assess its capability to attract and guide fish. Despite challenges with flume flow conditions and the impact of flume dimensions on flow directionality and velocity, the studies provided insights into fish behavior and preferences, particularly the requirement for a consistent flow stream for migration cues. Adjustments to the fin structure demonstrated potential effectiveness in guiding fish toward the module. However, the hydraulic conditions within the flume environment did not accurately reflect typical in-river scenarios, therefore the results were inconclusive with respect to the optimal system configuration for in-river use. In the future, conducting comprehensive field studies can enhance understanding of the interactions between fish behavior and flow conditions created by the ZAO Attractor. Additionally, a design review is advised, particularly regarding the load scenarios throughout the seasons and positioning of the ZAO Attractor. These studies should continue to refine the design to achieve its intended benefits: economical and effective fish attraction and passage that can be adapted to specific site conditions while allowing for continued energy generation at sites up for re-licensure and adding hydropower generation to previously untapped resources in non-powered dams and new stream reaches. In conclusion, the ZAO fish passage attraction module presents a promising approach to fish passage at hydropower stations, with the potential to balance environmental concerns with renewable energy development. However, further field validation and optimization are necessary to ensure its effectiveness and practicality in real-world applications.

Final Technical Report↗

Conference on Continental margin mass wasting and Pleistocene sea-level changes, August 13-15, 1980

A conference on Continental Margin Mass Wasting and Pleistocene Sea-Level Changes was held in Woods Hole, Mass., August 13-15, 1980. Forty-seven participants, representing many government, academic, and industrial organizations, discussed the current state of knowledge of the features of marine mass wasting and of the interrelations of factors influencing them. These factors include sediment source, composition, textures, sedimentation rates, climatic and sea-level changes, gas and gas hydrate (clathrate) contents of sediments, geotechnical characteristics, oceanographic and morphological factors, ground-water processes, and seismic events. The part played by these factors in the processes and features of mass movement and the engineering considerations imposed by the emplacement of manmade structures on the sea floor were considered vital to the evaluation of hazards involved in offshore exploration and development. The conference concluded with a call for bold programs to establish the probability of occurrence and the quantitative importance of these factors and to devise more reliable means of measurement, particularly in place, of the characteristics of the sediment and features involved.

Circular↗

NGA-West 2 GMPE average site coefficients for use in earthquake-resistant design

Site coefficients corresponding to those in tables 11.4–1 and 11.4–2 of Minimum Design Loads for Buildings and Other Structures published by the American Society of Civil Engineers (Standard ASCE/SEI 7-10) are derived from four of the Next Generation Attenuation West2 (NGA-W2) Ground-Motion Prediction Equations (GMPEs). The resulting coefficients are compared with those derived by other researchers and those derived from the NGA-West1 database. The derivation of the NGA-W2 average site coefficients provides a simple procedure to update site coefficients with each update in the Maximum Considered Earthquake Response MCER maps. The simple procedure yields average site coefficients consistent with those derived for site-specific design purposes. The NGA-W2 GMPEs provide simple scale factors to reduce conservatism in current simplified design procedures.

Open-File Report↗

Estimating flood magnitude and frequency at gaged and ungaged sites on streams in Alaska and conterminous basins in Canada, based on data through water year 2012

Estimates of the magnitude and frequency of floods are needed across Alaska for engineering design of transportation and water-conveyance structures, flood-insurance studies, flood-plain management, and other water-resource purposes. This report updates methods for estimating flood magnitude and frequency in Alaska and conterminous basins in Canada. Annual peak-flow data through water year 2012 were compiled from 387 streamgages on unregulated streams with at least 10 years of record. Flood-frequency estimates were computed for each streamgage using the Expected Moments Algorithm to fit a Pearson Type III distribution to the logarithms of annual peak flows. A multiple Grubbs-Beck test was used to identify potentially influential low floods in the time series of peak flows for censoring in the flood frequency analysis. For two new regional skew areas, flood-frequency estimates using station skew were computed for stations with at least 25 years of record for use in a Bayesian least-squares regression analysis to determine a regional skew value. The consideration of basin characteristics as explanatory variables for regional skew resulted in improvements in precision too small to warrant the additional model complexity, and a constant model was adopted. Regional Skew Area 1 in eastern-central Alaska had a regional skew of 0.54 and an average variance of prediction of 0.45, corresponding to an effective record length of 22 years. Regional Skew Area 2, encompassing coastal areas bordering the Gulf of Alaska, had a regional skew of 0.18 and an average variance of prediction of 0.12, corresponding to an effective record length of 59 years. Station flood-frequency estimates for study sites in regional skew areas were then recomputed using a weighted skew incorporating the station skew and regional skew. In a new regional skew exclusion area outside the regional skew areas, the density of long-record streamgages was too sparse for regional analysis and station skew was used for all estimates. Final station flood frequency estimates for all study streamgages are presented for the 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities. Regional multiple-regression analysis was used to produce equations for estimating flood frequency statistics from explanatory basin characteristics. Basin characteristics, including physical and climatic variables, were updated for all study streamgages using a geographical information system and geospatial source data. Screening for similar-sized nested basins eliminated hydrologically redundant sites, and screening for eligibility for analysis of explanatory variables eliminated regulated peaks, outburst peaks, and sites with indeterminate basin characteristics. An ordinary least‑squares regression used flood-frequency statistics and basin characteristics for 341 streamgages (284 in Alaska and 57 in Canada) to determine the most suitable combination of basin characteristics for a flood-frequency regression model and to explore regional grouping of streamgages for explaining variability in flood-frequency statistics across the study area. The most suitable model for explaining flood frequency used drainage area and mean annual precipitation as explanatory variables for the entire study area as a region. Final regression equations for estimating the 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probability discharge in Alaska and conterminous basins in Canada were developed using a generalized least-squares regression. The average standard error of prediction for the regression equations for the various annual exceedance probabilities ranged from 69 to 82 percent, and the pseudo-coefficient of determination (pseudo-R 2 ) ranged from 85 to 91 percent. The regional regression equations from this study were incorporated into the U.S. Geological Survey StreamStats program for a limited area of the State—the Cook Inlet Basin. StreamStats is a national web-based geographic information system application that facilitates retrieval of streamflow statistics and associated information. StreamStats retrieves published data for gaged sites and, for user-selected ungaged sites, delineates drainage areas from topographic and hydrographic data, computes basin characteristics, and computes flood frequency estimates using the regional regression equations.

Alaska↗

Preliminary study of the water-temperature regime of the North Santiam River downstream from Detroit and Big Cliff dams, Oregon

A riverine-temperature model and associated data-collection system were developed to help the Corps of engineers determine cost benefits of selective-withdrawal structures for future use with dams on the Willamette River System. A U.S. Geological Survey Lagrangian reference frame, digital computer model was used to simulate stream temperatures on the North Santiam River downstream of the multipurpose Detroit dam and a reregulating dam (Big Cliff), from river mile 45.6 to 2.9. In simulation, only available air-temperature and windspeed information from a nearby National Weather Service station at Salem, Oregon were used. This preliminary investigation found that the model predicted mean daily temperatures to within 0.4 C standard deviation. Analysis of projected selective-withdrawal scenarios showed that the model has the sensitivity to indicate water-temperature changes 42.7 miles downstream on the North Santiam River. (USGS)

Water-Resources Investigations Report↗

Drainage areas of Iowa streams

The drainage area of a stream at a specified location ordinarily may be defined as that area, measured in a horizontal plane, which is enclosed by a topographic divide such that direct surface runoff from precipitation would drain by gravity into the river basin above the specified point. One of the most important factors in the hydrologic computation for the design of structures on or over watercourses is the drainage area upstream from the point under consideration. Other hydrologic studies such as low-flow, flood-frequency analyses, rainfall-runoff correlations, stream density, and area-distance make use of this factor as a basic premise for computation. In order that the drainage-area information of the interior streams of Iowa be of uniform accuracy and available to all users of these data, this report has been compiled, and the drainage areas of all streams in excess of 5 square mies are listed. For the larger streams, drainage areas have been determined at numerous intermediate points. As a result of this report much basic background material has been compiled that will he useful in future hydrologic studies of drainage basin characteristics. This publication is limited to the presentation of the drainage-area data for the interior streams of the State. The methods of application of these data to the study of streamflow characteristics, and the design of related structures are properly the function of the design engineer and are not discussed herein.

Iowa↗

Davis Pond freshwater prediversion biomonitoring study: freshwater fisheries and eagles

In January 2001, the construction of the Davis Pond freshwater diversion structure was completed by the U.S. Army Corps of Engineers. The diversion of freshwater from the Mississippi River is intended to mitigate saltwater intrusion from the Gulf of Mexico and to lessen the concomitant loss of wetland areas. In addition to the freshwater inflow, Barataria Bay basin would receive nutrients, increased flows of sediments, and water-borne and sediment-bound compounds. The purpose of this biomonitoring study was, therefore, to serve as a baseline for prediversion concentrations of selected contaminants in bald eagle ( Haliaeetus leucocephalus ) nestlings (hereafter referred to as eaglets), representative freshwater fish, and bivalves. Samples were collected from January through June 2001. Two similarly designed postdiversion studies, as described in the biological monitoring program, are planned. Active bald eagle nests targeted for sampling eaglet blood (n = 6) were generally located southwest and south of the diversion structure. The designated sites for aquatic animal sampling were at Lake Salvador, at Lake Cataouatche, at Bayou Couba, and along the Mississippi River. Aquatic animals representative of eagle prey were collected. Fish were from three different trophic levels and have varying feeding strategies and life histories. These included herbivorous striped mullet ( Mugil cephalus ), omnivorous blue catfish ( Ictalurus furcatus ), and carnivorous largemouth bass ( Micropterus salmoides ). Three individuals per species were collected at each of the four sampling sites. Freshwater Atlantic rangia clams ( Rangia cuneata ) were collected at the downstream marsh sites, and zebra mussels ( Dreissena spp.) were collected on the Mississippi River. The U.S. Geological Survey (USGS) Biomonitoring of Environmental Status and Trends (BEST) protocols served as guides for fish sampling and health assessments. Fish are useful for monitoring aquatic ecosystems because they accumulate pesticides and other contaminants. Biomarker data on individual fish, generated at the USGS National Wetlands Research Center (Lafayette, La.), included percent white blood cells in whole blood, spleen weight to body weight ratio, liver weight to body weight ratio, condition factor, splenic macrophage aggregates, and liver microsomal 7-ethoxyresorufin-o-deethylase (EROD) activity. Fish age was estimated by comparing total lengths with values from the same species in the Southeast United States as determined from the literature. Contaminant analyses were coordinated by the U.S. Fish and Wildlife Service (USFWS) Analytical Control Facility (Laurel, Md.), where residues of organochlorine (OC) pesticides, total polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), aliphatic hydrocarbons (AHs), and trace elements were determined. The organic contaminant data were generated at the Mississippi State University Chemical Lab (Mississippi State, Miss.), and the inorganic contaminant data were generated by the Texas A&M University Geochemical and Environmental Research Group (College Station, Tex.). Statistical tests were performed to assess relationships among contaminants, fish age, fish species, and collection sites. Trends in interspecific differences among fish in concentrations of contaminants were noted. Striped mullet (hereafter mullet) frequently displayed the highest chemical concentrations. Levels of contaminants were generally higher in samples obtained from the Mississippi River than in those collected from the diversion area and were higher in mussels and clams (hereafter bivalves) than in fish. Because the Mississippi River sampling site for mullet and largemouth bass was downriver of the structure and south of New Orleans and the catfish site was upriver, the downriver data may not be directly reflective of the results from the receiving waters at the Davis Pond structure. Compared to the Caernarvon freshwater prediversion study in 1990 that assessed possible influx of contaminants with the freshwater diversion, contaminant levels in fishes and bivalves in this study were generally lower, yet three nontoxic inorganic elements in Davis Pond fish samples exhibited ranges of concentrations that were more than two times higher than did those from Caernarvon. Levels in bivalves were different between diversions but about equal in the numbers of trace elements showing high levels per location. Contaminant values were compared to those listed in various literature and agency sources, both regional and national, including the National Contaminant Biomonitoring Program (NCBP), in which the 85th percentile and above represents what is considered to be an elevated contaminant concentration and cause for concern. Generally, bivalves were at the high end of their ranges for both organic and inorganic contaminants. In this study, OCs were detectable in 67 percent of fish from the Mississippi River site, ranging from 0.15 to 1.09 μg/g wet weight (ww) or fresh weight (fw), and in 11 percent of the fish from the marsh sites, ranging from 0.06 to 0.612 μg/g ww. Bivalves from the Mississippi River had OC levels of 0.096 μg/g ww, whereas none were detectable in bivalves at the marsh sites. In this study, p,p ’-dichlorodiphenyldichloroethylene ( p,p’ -DDE) (a biodegradation product of DDT [dichlorodiphenyl trichloroethane]) and total PCBs were the most frequently detected OCs and were primarily from the Mississippi River. For total OC content, using adjusted least squares means, some significant interactions were noted between fish species and sites. PAHs were detected in aquatic animals at all sites (range of 0.017–17.534 μg/g ww), as were AHs (range of 0.423–4.549 μg/g ww); the highest levels of PAHs and AHs were found in bivalves from the Mississippi River. When analysis of variance (α = 0.05) was performed with data from aquatic animals, there were only two significant relationships between PAHs, AHs, and OCs between species, site, and age or the interaction among these variables. There was an interaction between fish species and n-decane (an AH) in that mullet and largemouth bass had significantly higher levels than did catfish ( P = 0.0175). When general linear means were used to investigate associations of inorganic contaminants among fish species, site, and age or any interactions among these variables, no significant results were noted for arsenic, cadmium, lead, beryllium, boron, molybdenum, or nickel. The range of mercury in fish in this study was 0.04–0.14 μg/g ww (0.14– 0.48 μg/g dry weight [dw]), with the most elevated levels detected in predatory largemouth bass at the sampling point farthest downstream from the structure and within the marsh area. Mercury was positively correlated with fish age ( P = 0.0152), where levels were estimated to increase 0.0253 parts per million (ppm) dw per year. In the Mississippi River, catfish showed significantly higher levels of mercury than did mullet or largemouth bass ( P = 0.00167). Among fish species, mullet displayed the highest levels in fish of aluminum, barium, manganese, and iron, all considered to have low toxicity in hydrologic systems. An interaction between fish and site was seen with aluminum ( P = 0.0031), where concentrations in mullet were significantly higher in the Mississippi River than at the other sites, as was also seen with barium ( P = 0.0009), chromium ( P = <0.0001), manganese ( P = 0.0004), strontium ( P = 0.0074), vanadium ( P = 0.0156), and zinc ( P = 0.0059). For iron ( P = 0.0.0001), mullet and largemouth bass at both the Mississippi River and Lake Salvador showed higher levels than did catfish, and these two species showed higher levels at two of the four sites. An interaction between fish and site was also seen with chromium ( P = <0.0001) in that concentrations in mullet were significantly higher in the Mississippi River than at the other sites, as was also seen with strontium ( P = 0.0074), vanadium ( P = 0.0156), and zinc ( P = 0.0059), metals for which deleterious effects have been demonstrated in other ecosystems. The NCBP program lists the 85th percentile for zinc at 34.2 μg/g fw (117.9 μg/g dw). In the Davis Pond prediversion biomonitoring study (hereafter the current study), one fish (MUL31RIVER, fish ID 8) showed values higher than that (125.4 μg/g dw or 37.54 μg/g ww), and the Mississippi River bivalve sample (MUSSRIVER) had a value of 140 μg/g dw (41.2 μg/g ww). In the current study, approximately 86 percent of the fish had measurable selenium levels, yet none reached the 85th percentile. The 85th percentile for selenium from the NCBP was 0.73 μg/g ww. Significantly higher levels of selenium were seen in mullet than in largemouth bass and catfish ( P = 0.0023). The NCBP 85th percentile for lead is 0.22 μg/g ww (0.76 μg/g dw). In the current study, the range of concentrations of lead was as much as 18.3 ppm dw (MUL31RIVER, fish ID 8), with the three most elevated values (range of 3.46–5.31 μg/g ww) coming from mullet from the Mississippi River. Biomarker data are measurable and directly reflect the condition of the animal, and measuring more than one biomarker in an individual increases confidence in health assessments. In the current study, biomarkers included macrophage aggregates (MAs), liver (hepatosomatic index [HSI]) and spleen (splenosomatic index [SSI]) weight to body weight ratios, percent white blood cells (WBCs) in whole blood, and condition factor. Few significant differences were noted with any of the biomarkers between sites, and there were no relationships between species and sites. For improved use of biomarker assessments, an increase in fish sample size would be useful for postdiversion sampling, as would comparisons of fish of the same sex and reproductive condition. During the current study, success for eagle nests in the diversion area and reference sites was similar as determined by numbers of nestlings fledged. When temperatures were below average during winter 2000, nests in both regions similarly failed. At each nest, the primary evidence of food items was small mammals. Eaglets (n = 6) generally appeared healthy, and whole blood concentrations of organic contaminants exceeded detection limits with three incidences of p,p’ -DDE (0.002–0.006 μg/L ww) and one incidence of oxychlordane (0.002 μg/L ww). The levels of p,p’ -DDE were well below those that have been inversely correlated with productivity and success rates of nesting bald eagles on a regional scale. The low values found in the whole blood samples for OC pesticides and PCBs were even lower when corrected for plasma volume. Aluminum values were 3.66 and 5.75 μg/L in two samples, zinc ranged from 5.21 to 6.77 μg/L ww in six samples, and silicon ranged from 1.7 to 4.6 μg/L in four samples. Selenium was detectable in each bird with the range at 0.332–0.566 μg/L ww, and strontium ranged from 0.0581 to 0.0975 μg/L ww. Mercury was detectable in blood samples from each bird and ranged from 0.0254 to 0.0845 μg/L ww, whereas lead was detectable in four samples and ranged from 0.0042 to 0.0136 μg/L ww. Although no detectable levels of total PCBs were found (also correlated with decreased reproductive productivity), 70 percent of the aquatic animals from the Mississippi River contained total PCBs (range 0.13–0.79 μg/L), whereas only about 7 percent of the aquatic animals sampled from the marsh area contained PCBs. Suggestions for postdiversion sampling include lowering the analytical detection limit for some metals, sampling aquatic animals over the course of a single season, obtaining a higher sample number of mature fish of one species (for example, blue catfish) within a range of total lengths for biomarker analyses, obtaining otoliths for estimating fish ages, assessing dioxins in eaglet blood, examining triazines in water, and obtaining all Mississippi River fish samples as close to the Davis Pond structure intake as possible. Because contaminants found in blood of eaglets reflect their prey species and because of the contaminant levels found in fish in the current study, eaglets may not be consuming primarily these species; therefore, obtaining juvenile nutria ( Myocastor coypus ) or turtle species for contaminant analyses might be considered, as well as collecting greater blood volume and using plasma to measure OCs and PCBs. Data obtained postdiversion will be compared with prediversion data to monitor changes.

Louisiana↗

Beyond SaGMRotI: Conversion to SaArb, SaSN, and SaMaxRot

In the seismic design of structures, estimates of design forces are usually provided to the engineer in the form of elastic response spectra. Predictive equations for elastic response spectra are derived from empirical recordings of ground motion. The geometric mean of the two orthogonal horizontal components of motion is often used as the response value in these predictive equations, although it is not necessarily the most relevant estimate of forces within the structure. For some applications it is desirable to estimate the response value on a randomly chosen single component of ground motion, and in other applications the maximum response in a single direction is required. We give adjustment factors that allow converting the predictions of geometric-mean ground-motion predictions into either of these other two measures of seismic ground-motion intensity. In addition, we investigate the relation of the strike-normal component of ground motion to the maximum response values. We show that the strike-normal component of ground motion seldom corresponds to the maximum horizontal-component response value (in particular, at distances greater than about 3 km from faults), and that focusing on this case in exclusion of others can result in the underestimation of the maximum component. This research provides estimates of the maximum response value of a single component for all cases, not just near-fault strike-normal components. We provide modification factors that can be used to convert predictions of ground motions in terms of the geometric mean to the maximum spectral acceleration (SaMaxRot) and the random component of spectral acceleration (SaArb). Included are modification factors for both the mean and the aleatory standard deviation of the logarithm of the motions.

Bulletin of the Seismological Society of America↗

Effects of box culverts on stream habitat, channel morphology, and fish and macroinvertebrate communities at selected sites in South Carolina, 2016–18

Much attention has been placed on the role that under-roadway culverts may have in inhibiting upstream fish movement because of altered hydrology and unsuitable conditions for accessing or swimming through the culvert. Other culvert effects related to habitat alterations or disturbance to macroinvertebrate communities have received relatively little attention. Entities responsible for culverts or other stream crossing structures are required to follow the U.S. Army Corps of Engineers guidelines for compensatory mitigation should any disturbance result from an engineering activity. One factor considered in the scoring of mitigation requirements is culvert length. Except for shading a longer length of stream, it is unknown whether longer culverts result in greater disturbance to stream habitat or the biotic communities than shorter culverts. The U.S. Geological Survey, in cooperation with the South Carolina Department of Transportation, evaluated the role of culverts in altering physical habitat and community structure of fish and macroinvertebrates at 20 sites in South Carolina. Culvert sites were categorized by length (either greater than 30.5 meters or less than or equal to 30.5 meters) and physiographic province (Piedmont or upper Coastal Plain). This study design allowed for a regional assessment to determine if culverts may have different effects on habitat and biotic communities in different physical settings. The results indicated considerable variation in physical habitat characteristics within and among the culvert sites from all categories. A consistent finding was that channel cross-sectional area tended to increase in reaches downstream from culverts in the upper Coastal Plain. The primary dimension of change was vertical, that is, incision of the streambed. This change, however, did not seem to coincide with a deleterious effect on the fish community. Increased habitat complexity and greater taxonomic richness were observed at most sites with downstream incision. Macroinvertebrate communities were highly variable and did not tend to cluster along any of the culvert categories, which may reflect the variability of microhabitats within each site. In contrast, fish communities were largely segregated by physiographic province but did not show any other significant clustering on the basis of upstream or downstream reach or culvert length. Given the small within-group sample size, extrapolation of results should be done carefully, acknowledging the physiographic and group characteristics.

South Carolina↗

Regional interdisciplinary paleoflood approach to assess extreme flood potential

In the past decade, there has been a growing interest of dam safety officials to incorporate a risk‐based analysis for design‐flood hydrology. Extreme or rare floods, with probabilities in the range of about 10 −3 to 10 −7 chance of occurrence per year, are of continuing interest to the hydrologic and engineering communities for purposes of planning and design of structures such as dams [ National Research Council , 1988]. The National Research Council stresses that as much information as possible about floods needs to be used for evaluation of the risk and consequences of any decision. A regional interdisciplinary paleoflood approach was developed to assist dam safety officials and floodplain managers in their assessments of the risk of large floods. The interdisciplinary components included documenting maximum paleofloods and a regional analyses of contemporary extreme rainfall and flood data to complement a site‐specific probable maximum precipitation study [ Tomlinson and Solak , 1997]. The cost‐effective approach, which can be used in many other hydrometeorologic settings, was applied to Elkhead Reservoir in Elkhead Creek (531 km 2 ) in northwestern Colorado; the regional study area was 10,900 km 2 . Paleoflood data using bouldery flood deposits and noninundation surfaces for 88 streams were used to document maximum flood discharges that have occurred during the Holocene. Several relative dating methods were used to determine the age of paleoflood deposits and noninundation surfaces. No evidence of substantial flooding was found in the study area. The maximum paleoflood of 135 m 3 s −1 for Elkhead Creek is about 13% of the site‐specific probable maximum flood of 1020 m 3 s −1 . Flood‐frequency relations using the expected moments algorithm, which better incorporates paleoflood data, were developed to assess the risk of extreme floods. Envelope curves encompassing maximum rainfall (181 sites) and floods (218 sites) were developed for northwestern Colorado to help define maximum contemporary and Holocene flooding in Elkhead Creek and in a regional frequency context. Study results for Elkhead Reservoir were accepted by the Colorado State Engineer for dam safety certification.

Water Resources Research↗

Development and utilization of USGS ShakeCast for rapid post-earthquake assessment of critical facilities and infrastructure

The ShakeCast system is an openly available, near real-time post-earthquake information management system. ShakeCast is widely used by public and private emergency planners and responders, lifeline utility operators and transportation engineers to automatically receive and process ShakeMap products for situational awareness, inspection priority, or damage assessment of their own infrastructure or building portfolios. The success of ShakeCast to date and its broad, critical-user base mandates improved software usability and functionality, including improved engineering-based damage and loss functions. In order to make the software more accessible to novice users—while still utilizing advanced users’ technical and engineering background—we have developed a “ShakeCast Workbook”, a well documented, Excel spreadsheet-based user interface that allows users to input notification and inventory data and export XML files requisite for operating the ShakeCast system. Users will be able to select structure based on a minimum set of user-specified facility (building location, size, height, use, construction age, etc.). “Expert” users will be able to import user-modified structural response properties into facility inventory associated with the HAZUS Advanced Engineering Building Modules (AEBM). The goal of the ShakeCast system is to provide simplified real-time potential impact and inspection metrics (i.e., green, yellow, orange and red priority ratings) to allow users to institute customized earthquake response protocols. Previously, fragilities were approximated using individual ShakeMap intensity measures (IMs, specifically PGA and 0.3 and 1s spectral accelerations) for each facility but we are now performing capacity-spectrum damage state calculations using a more robust characterization of spectral deamnd.We are also developing methods for the direct import of ShakeMap’s multi-period spectra in lieu of the assumed three-domain design spectrum (at 0.3s for constant acceleration; 1s or 3s for constant velocity and constant displacement at very long response periods). As part of ongoing ShakeCast research and development, we will also explore the use of ShakeMap IM uncertainty estimates and evaluate the assumption of employing multiple response spectral damping values rather than the single 5%-damped value currently employed. Developing and incorporating advanced fragility assignments into the ShakeCast Workbook requires related software modifications and database improvements; these enhancements are part of an extensive rewrite of the ShakeCast application.

Conference Paper↗

Engineering uses of physics-based ground motion simulations

This paper summarizes validation methodologies focused on enabling ground motion simulations to be used with confidence in engineering applications such as seismic hazard analysis and dynmaic analysis of structural and geotechnical systems. Numberical simullation of ground motion from large erthquakes, utilizing physics-based models of earthquake rupture and wave propagation, is an area of active research in the earth science community. Refinement and validatoin of these models require collaboration between earthquake scientists and engineering users, and testing/rating methodolgies for simulated ground motions to be used with confidence in engineering applications. This paper provides an introduction to this field and an overview of current research activities being coordinated by the Souther California Earthquake Center (SCEC). These activities are related both to advancing the science and computational infrastructure needed to produce ground motion simulations, as well as to engineering validation procedures. Current research areas and anticipated future achievements are also discussed.

Conference Paper↗

Method for detecting moment connection fracture using high-frequency transients in recorded accelerations

The 1994 Northridge earthquake caused brittle fractures in steel moment frame building connections, despite causing little visible building damage in most cases. Future strong earthquakes are likely to cause similar damage to the many un-retrofitted pre-Northridge buildings in the western US and elsewhere. Without obvious permanent building deformation, costly intrusive inspections are currently the only way to determine if major fracture damage that compromises building safety has occurred. Building instrumentation has the potential to provide engineers and owners with timely information on fracture occurrence. Structural dynamics theory predicts and scale model experiments have demonstrated that sudden, large changes in structure properties caused by moment connection fractures will cause transient dynamic response. A method is proposed for detecting the building-wide level of connection fracture damage, based on observing high-frequency, fracture-induced transient dynamic responses in strong motion accelerograms. High-frequency transients are short (<1 s), sudden-onset waveforms with frequency content above 25 Hz that are visually apparent in recorded accelerations. Strong motion data and damage information from intrusive inspections collected from 24 sparsely instrumented buildings following the 1994 Northridge earthquake are used to evaluate the proposed method. The method’s overall success rate for this data set is 67%, but this rate varies significantly with damage level. The method performs reasonably well in detecting significant fracture damage and in identifying cases with no damage, but fails in cases with few fractures. Combining the method with other damage indicators and removing records with excessive noise improves the ability to detect the level of damage.

Journal of Constructional Steel Research↗

CoastalImageLib: An open-source Python package for creating common coastal image products

CoastalImageLib is a Python library that produces common coastal image products intended for quantitative analysis of coastal environments. This library contains functions to georectify and merge multiple oblique camera views, produce statistical image products for a given set of images, and create subsampled pixel instruments for use in bathymetric inversion, surface current estimation, run-up calculations, and other quantitative analyses. This package intends to be an open-source broadly generalizable front end to future coastal imaging applications, ultimately expanding user accessibility to optical remote sensing of coastal environments. This package was developed and tested on data collected from the Argus Tower, a 43 m tall observation structure in Duck, North Carolina at the US Army Engineer Research and Development Center’s Field Research Facility that holds six stationary cameras which collect twice-hourly coastal image products. Thus, CoastalImageLib also contains functions designed to interface with the file storage and collection system implemented at the Argus Tower.

SoftwareX↗

An assessment of seismic monitoring in the United States; requirement for an Advanced National Seismic System

This report assesses the status, needs, and associated costs of seismic monitoring in the United States. It sets down the requirement for an effective, national seismic monitoring strategy and an advanced system linking national, regional, and urban monitoring networks. Modernized seismic monitoring can provide alerts of imminent strong earthquake shaking; rapid assessment of distribution and severity of earthquake shaking (for use in emergency response); warnings of a possible tsunami from an offshore earthquake; warnings of volcanic eruptions; information for correctly characterizing earthquake hazards and for improving building codes; and data on response of buildings and structures during earthquakes, for safe, cost-effective design, engineering, and construction practices in earthquake-prone regions.

Circular↗

Implications of NGA for NEHRP site coefficients

Three proposals are provided to update tables 11.4-1 and 11.4-2 of Minimum Design Loads for Buildings and Other Structures (7-10), by the American Society of Civil Engineers (2010) (ASCE/SEI 7-10), with site coefficients implied directly by NGA (Next Generation Attenuation) ground motion prediction equations (GMPEs). Proposals include a recommendation to use straight-line interpolation to infer site coefficients at intermediate values of ̅v s (average shear velocity). Site coefficients are recommended to ensure consistency with ASCE/SEI 7-10 MCE R (Maximum Considered Earthquake) seismic-design maps and simplified site-specific design spectra procedures requiring site classes with associated tabulated site coefficients and a reference site class with unity site coefficients. Recommended site coefficients are confirmed by independent observations of average site amplification coefficients inferred with respect to an average ground condition consistent with that used for the MCE R maps. The NGA coefficients recommended for consideration are implied directly by the NGA GMPEs and do not require introduction of additional models.

Open-File Report↗

Food-web dynamics of a floodplain mosaic overshadow the effects of engineered logjams for Pacific salmon and steelhead

Food webs vary in space and time. The structure and spatial arrangement of food webs are theorized to mediate temporal dynamics of energy flow, but empirical corroboration in intermediate-scale landscapes is scarce. River-floodplain landscapes encompass a mosaic of aquatic habitat patches and food webs, supporting a variety of aquatic consumers of conservation concern. How the structure and productivity of these patch-scale food webs change through time, and how floodplain restoration influences their dynamics, are unevaluated. We measured productivity and food-web dynamics across a mosaic of main-channel and side-channel habitats of the Methow River, WA, USA, during two study years (2009–2010; 2015–2016) and examined how food webs that sustained juvenile anadromous salmonids responded to habitat manipulation. By quantifying temporal variation in secondary production and organic matter flow across nontreated river-floodplain habitats and comparing that variation to a side channel treated with engineered logjams, we jointly confronted spatial food-web theory and assessed whether food-web dynamics in the treated side channel exceeded natural variation exhibited in nontreated habitats. We observed that organic matter flow through the more complex, main-channel food web was similar between study years, whereas organic matter flow through the simpler, side-channel food webs changed up to ~4-fold. In the side channel treated with engineered logjams, production of benthic invertebrates and juvenile salmonids increased between study years by 2× and 4×, respectively; however, these changes did not surpass the temporal variation observed in untreated habitats. For instance, juvenile salmonid production rose 17-fold in one untreated side-channel habitat, and natural aggregation of large wood in another coincided with a shift to community and food-web dominance by juvenile salmonids. Our findings suggest that interannual dynamism in material flux across floodplain habitat mosaics is interrelated with patchiness in food-web complexity and may overshadow the ecological responses to localized river restoration. Although this dynamism may inhibit detection of the ecological effects of river restoration, it may also act to stabilize aquatic ecosystems and buffer salmon and other species of conservation concern in the long term. As such, natural, landscape-level patchiness and dynamism in food webs should be integrated into conceptual foundations of process-based, river restoration.

Washington↗