Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Earth Surface Processes and Landforms”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 10Linked to original sources
USGS2026

Estimating paleotemperature using stable isotopes of soil-formed phyllosilicates from paleosols: A review

Fossilized soils, or paleosols, contain soil-formed phyllosilicates whose stable isotopic compositions may be used to calculate paleotemperature and thus reconstruct ancient terrestrial environments. Though paleosols are common in the geologic record, the use of phyllosilicates as paleotemperature proxies is limited in the literature owing to difficulties with selecting optimal paleosols, isolation from non-clay minerals and organic materials, mixtures of phyllosilicates in natural samples, wide variations of chemical compositions for phyllosilicates, and limited to undefined equilibrium fractionation factors between phyllosilicates-water. Here, we address these challenges by examining and comparing methods used for sample selection, mineral isolation, pretreatments, mineral identification, conventional and developing methods for oxygen and hydrogen isotopic analyses, and determination of phyllosilicate-water equilibrium fractionation factors, concluding with recommendations for best approaches for paleotemperature estimation. Additionally, we discuss how to identify and avoid detrital phyllosilicates, the impacts of diagenesis, comparison of stable isotope and non-isotope paleosol paleotemperature proxies, and challenges and opportunities for broadly using paleosols as paleoclimate archives. With ongoing efforts to refine this multi-faceted paleotemperature approach, the stable isotope geochemistry of soil-formed phyllosilicates continues to be an invaluable proxy system, enhancing our understanding of terrestrial paleoenvironments and paleoclimate.

Kansas↗
USGS1976

Helium detection as a guide for uranium exploration

Helium, a byproduct of radioactive decay, may prove to be a valuable indicator of the presence and distribution of uranium deposits. Recent technological advances permit the development of instrumentation not previously adapted for this purpose. Commercially available equipment can provide high sensitivity at low cost and allow reasonable mobility for field use. A truck-mounted mass-spectrometer, tuned for helium-4, permits immediate adjustment or modification of sampling patterns in response to accumulating data. The inlet system of the spectrometer has been designed to allow flexibility in gas analyses from various sample types--soil gas, atmosphere, or gases in water. Sensitivity of the instrument is better than 50 parts of helium per 10 9 parts of gas. Replicate samples and standards can be analyzed in only 3 minutes. Helium in soil gas is being used for the initial evaluation of the technique. A hollow probe, as much as 2 m long, is driven into the ground; and a 10-cc syringe is used to purge the probe and extract the gas. This sample is then injected into the inlet system and introduced into the spectrometer at constant pressure. The output signal is displayed on a chart recorder. Investigations can be performed on a qualitative, relative basis, or on a quantitative basis by comparison to calibrated helium standards. Preliminary field testing includes studies of the responses to variations in wind speed, temperature, barometric pressure, moisture, and sampling depth over extended time periods, as well as studies of geologic controls on the helium content in soil gas. Surveys over known uranium occurrences reveal some anomalous helium distributions. This report describes an updated technological approach to an old idea: that of using helium, a byproduct of uranium radioactive decay, as an exploration tool for uranium. Helium is the sixth most abundant gas found in the earth's atmosphere (Table 1). It is an inert gas and very mobile, mixing rapidly. When the alpha particles from the radioactive decay of uranium and thorium pick up two electrons, atoms of the isotope helium-4 are formed. Several helium-4 atoms are produced from each decay series of U-238, U-235, and Th-232 (fig. 1). The half-lives of the parent isotopes are5also shown in figure 1. One gram of uranium will produce ~10 5 atoms of helium-4 per second, and one gram of thorium produces ~2.5 x 10 4 atoms of helium-4 per second (fig. 2). Calculations of the helium produced from the crust and mantle reveal that 1,125 x 10 30 atoms per year are produced, but only 7 x 10 30 atoms per year escape from the earth (Damon and Kulp, 1958). More is being produced than is being lost; in fact, the total atmospheric content of helium could be produced in only 2 million years (MacDonald, 1963)! However, all the crustal and mantle helium-4 does not degas into the atmosphere as it is formed. It is trapped in crystal lattices and in pore spaces within the earth. What this means is that there is excess helium-4 in the earth--excess, that is, compared to the atmospheric concentration in equilibrium with the helium-4 escape rate into space and the helium-4 flux from the crust and mantle (Nicolet, 1957). Near-surface pockets of high helium-4 concentrations are known, and some natural gas fields are so enriched that they are the source for commercial production of helium. Work by Roberts and others (1975) has shown high helium concentration in the soil gas associated with geothermal areas; and work by Clark and Kugler (1973), Dyck (1975), and Goldak (1974), for example, has noted high helium concentrations in soils and waters in the vicinity of uranium deposits. These latter studies certainly indicate the potential of helium detection for use as an exploration tool for uranium.

Open-File Report↗
USGS2025

Widespread anhydrite saturation in Laramide-age arc magmas of southwestern USA

Anhydrite is considered a rare mineral phase in magmas, with only ∼33 documented occurrences worldwide. However, anhydrite readily decomposes in the near-surface environment, making it difficult to recognize its former presence in rocks collected at or near Earth’s surface. In such samples, only small anhydrite inclusions fully shielded within other minerals can have survived. During a recent field trip to the southwestern USA, we sampled 17 Laramide-age (ca. 40−80 Ma) magma systems, most of which are associated with porphyry copper deposits. A systematic search for anhydrite inclusions preserved within apatite, amphibole, plagioclase, and quartz phenocrysts in ∼100 rock samples by optical microscopy and Raman spectroscopy revealed that each of these 17 magma systems was at least temporarily anhydrite-saturated. Also, most previously identified magmatic anhydrite-bearing intrusions are associated with porphyry copper deposits, and both intrusive and volcanic rocks containing magmatic anhydrite show high Sr/Y ratios. These observations suggest that anhydrite saturation and porphyry copper formation are linked via magma fractionation at high pressure. Compared to average arc magmas, anhydrite-bearing magmas are unusually oxidized and sulfur-rich and seem to also be unusually water-rich. Hence, our preferred interpretation is that magma generation and/or fractionation at high pressure promotes the formation of superhydrous and oxidized magmas, which in turn promotes high sulfur contents and ultimately the precipitation of anhydrite. The high mineralization potential of these magmas does not need to result from their high sulfur content but could be caused by other properties of high-pressure magmas.

Arizona, New Mexico↗
USGS2024

Using surficial geologic maps, vegetation, and monitoring to address erosion impacts from grazing in Channel Islands National Park, California

Employing a map-unit classification scheme based on geomorphic process and age, the U.S. Geological Survey (USGS) mapped Quaternary surficial deposits of the five islands comprising Channel Islands National Park (CHIS), California, as no such maps previously existed. Mapping was motivated through an agreement with the National Park Service (NPS) to aid natural resource assessments, including post-grazing disturbance recovery and identification of mass wasting and tectonic hazards. The resulting detailed (1:12,000 scale) maps portray areas of upland erosional transport processes and alluvial, fluvial, eolian, beach, marine terrace, mass wasting, and mixed depositional processes at a scale commensurate with the process signal on the landscape. Detailed, GPS-located observations of sedimentology, pedogenic development, landscape position, and geomorphology constrain map unit identification. In addition, map-unit boundary delineation was determined in a GIS using a variety of high-resolution (sub-meter) aerial imagery and lidar-based DEMs complemented by derivative raster products. The GIS geodatabase schema used is GeMS compliant. Resolvable map-unit widths are as small as 10-15 meter. Locational accuracy of unit boundaries is estimated to be as low as 10 m or better. Detailed mapping is at a scale allowing determination of geomorphic transport processes operating on the landscape and conveys geologic information to land managers at a resolution commensurate with park resources. Map unit ages are constrained by relative soil chronostratigraphy, vertebrate and invertebrate fossils, and materials collected for dating control using radiogenic, luminescence, and cosmogenic radionuclide techniques. Associated topical studies examined connections between geology, surface water, and vegetation distribution and restoration.

California↗
USGS2024

Earthquake cycle mechanics during caldera collapse: Simulating the 2018 Kīlauea eruption

In multiple observed caldera-forming eruptions, the rock overlying a draining magma reservoir dropped downward along ring faults in sequences of discrete collapse earthquakes. These sequences are analogous to tectonic earthquake cycles and provide opportunities to examine fault mechanics and collapse eruption dynamics over multiple events. Collapse earthquake cycles have been studied with zero-dimensional slider-block models, but these do not account for the complicated interplay between fluid and elastic dynamics or for factors such as the heterogeneous fault properties and non-vertical ring fault geometries often inferred at volcanoes. We present two-dimensional axisymmetric mafic piston-like collapse earthquake cycle models that include rate-and-state friction, fully-dynamic elasticity, and compressible viscous fluid magma flow. We demonstrate that collapse earthquake intervals and magnitudes are highly sensitive to inertial effects, evolving stress fields, fault geometry, and depth-varying fault friction. Given the consistent earthquake cycles observed in most eruptions, this suggests that ring faults can quickly stabilize and often become nearly vertical at depth. We use the well-monitored 2018 collapse sequence at Kı̄lauea as a case study. Our model can produce many features of Kı̄lauea seismic and geodetic observations, except for a significant amount of interseismic slip, which cannot be readily explained with simple rate-and-state friction parameterizations.

Hawaii↗
USGS2025

Did they feel it? Legacy maroseismic data illuminates an engimatic 20th century earthquake

The challenges and the importance of preserving legacy instrumental records of earthquakes are now well-recognized (e.g., Richards & Hellweg, 2020, https://doi.org/10.1785/0220200053 ). Seismologists may not be aware of parallel challenges and opportunities with legacy macroseismic data for earthquakes in the United States. For much of the 20th century, macroseismic data were collected by a series of U.S. government agencies using a standard questionnaire distributed on postcards. Published summaries of postcards provide macroseismic data akin to modern Did You Feel It? questionnaire responses. In this paper we focus on the M 6.5 Fickle Hill, California earthquake, on 21 December 1954 (Hellweg et al., 2025) as a proof-of-concept, illustrating the potential of what we dub Did They Feel It? (DTFI) data to improve our understanding of significant 20th century U.S. earthquakes for which instrumental data are sparse. Legacy macroseismic data interpreted following modern conventions can potentially constrain traditional ShakeMaps at a level of detail and accuracy that in some respects rival maps for modern earthquakes. The updated ShakeMap for the 1954 Fickle Hill earthquake, also drawing from recently published media and first-person accounts, supports the location, depth, and stress drop value estimated from available instrumental data (Hellweg et al., 2025).

California↗
USGS2024

Deep lithospheric controls on surface deformation and seismicity around the East Anatolian Fault Zone and A3 Triple Junction

The East Anatolian Fault Zone (EAFZ) is a plate-bounding strike-slip fault capable of hosting large earthquakes, as demonstrated by the extremely damaging February 2023 M w 7.8 and M w 7.7 mainshocks of the Kahramanmaraş earthquake sequence. Deformation related to this boundary, part of the Anatolia-Arabia-Africa (A 3 ) Triple Junction, is diffuse, as was shown by part of this earthquake sequence occurring on a northern splay of the EAFZ (the Sürgü-Çardak Fault Zone; SCFZ). Controls on surface deformation are commonly linked to stress in the brittle upper crust, but the complex deformation and seismicity patterns in this region may also reflect deeper processes, such as variations in the location and extent of the strong Arabian Plate lithospheric mantle. Seismic tomography indicates that the Arabian Plate underthrusts Anatolia as far north as the SCFZ and extends as far west as the central Adana Basin, coincident with a zone of relatively deep (>30 km) strike-slip seismogenesis that has produced M w >6 earthquakes. By investigating the relationship between deformation since the inception of the EAFZ (ca. 5 Ma), seismic structure, and seismicity, we infer that the SCFZ will become the future SE boundary of the Anatolian Plate as part of the evolving A 3 Triple Junction.

GSA Today↗
USGS2024

Are field observations of surface rupture useful? An example from the 2023 Mw 7.8 Pazarcık, Turkey (Türkiye), earthquake

Field investigations have long been an important component of the scientific response to surface‐faulting earthquakes. However, in light of advances in remote data and models, the question arises whether field‐based observations of surface rupture remain useful for understanding rupture processes and seismic hazards. We approach this question using a field‐based study of the central 2023 M w 7.8 Pazarcık, Turkey (Türkiye), earthquake rupture, at the intersection of the east Anatolian fault (EAF) and Narlı fault. Our field observations include the surface rupture expression and extent of the central EAF and northernmost Narlı fault in generally forested and steep terrain and 68 measurements of left‐lateral surface displacement. These data improve our understanding of the Pazarcık rupture complexity, resolve the surface geometry of the Narlı fault–EAF connection, and exhibit a clear (>2 m) change in surface displacement across this intersection zone that confirms remote‐based coseismic slip models. Our study shows that focusing field efforts in areas of obscured or low‐resolution remote data can yield essential data for refining rupture extent, documenting perishable on‐fault displacement, and improving postearthquake situational awareness. A comparison of similarly large‐magnitude continental surface‐rupturing earthquakes indicates that displacement uncertainties relate to a complex set of factors, including measurement methods, rupture complexity, and displacement magnitude. Our study validates the need for postearthquake field observations, which, when driven by clear motivating questions and knowledge of methodological strengths and limitations, provide high‐resolution rupture data that complement remote‐based models.

Pazarcık↗
USGS2025

Earthquake stress-drop values delineate spatial variations in maximum shear stress in the Japanese forearc lithosphere

Earthquake stress drop (Δσ) may increase with depth and stress in the brittle lithosphere. However, the range of uncertainty in Δσ and the lack of constraints on absolute stress make it difficult to establish whether they are correlated. Here, we investigate Δσ dependence on depth and maximum shear stress ( τ max ) based on ~11 years of seismicity in the northeastern Japanese forearc following the 2011 Tohoku-Oki megathrust earthquake. We interpret Δσ estimates computed using both individual spectra and spectral-ratio methods and find that Δσ exhibits a clear depth dependence within the seismically active upper ~60 km of the forearc lithosphere ( ~ 0.8 MPa per 10 km). We further compare Δσ values with quantitative τ max estimates from finite-element models of force balance. We find that median Δσ values increase with τ max in the brittle forearc lithosphere and that earthquake stress release is proportional to τ max . The dependence of Δσ on τ max explains the apparent depth dependence of Δσ and suggests that average Δσ values provide a relative measure of the stress at failure. In the northeastern Japanese forearc, Δσ values remained roughly constant in the decade following the Tohoku-Oki earthquake, suggesting negligible changes in failure stress in the forearc since the mainshock.

Communications Earth and Environment↗
USGS2024

Trends and environmental impacts of virtual water trade

Virtual water describes water embedded in the production of goods and offers meaningful insights about the complex interplay between water, trade and sustainability. In this Review, we examine the trends, major players, traded products and key drivers of virtual water trade (VWT). Roughly 20% of water used in global food production is traded virtually rather than domestically consumed. As such, agriculture dominates VWT, with livestock products, wheat, maize, soybean, oil palm, coffee and cocoa contributing over 70% of total VWT. These products are also driving VWT growth, the volume of which has increased 2.9 times from 1986 to 2022. However, the countries leading VWT contributions (with China, the United States, the Netherlands, Germany and India accounting for 34% of the global VWT in 2022) have remained relatively stable over time, albeit with China becoming an increasingly important importer. VWT can mitigate the effects of water scarcity and food insecurity, although there are concerns about the disconnect between consumers and the environmental impacts of their choices, and unsustainable resource exploitation. Indeed, approximately 16% of unsustainable water use and 11% of global groundwater depletion are virtually traded. Future VWT analyses must consider factors such as water renewability, water quality, climate change impacts and socioeconomic implications.

Nature Reviews Earth & Environment↗
USGS2026

The damability function: A probabilistic approach to regional landslide dam susceptibility analysis applied to the Oregon Coast Range, USA

Landslides can dam rivers and require rapid response to mitigate catastrophic outburst floods. Here, we present a workflow to map landslide dam formation susceptibility at a regional scale. We define a probabilistic function that combines river valley width and landslide volume to efficiently determine the likelihood of a landslide dam or “damability”. We combine damability values with landslide susceptibility to estimate landslide dam susceptibility. The valley width measurements are automated using a new elevation threshold-based algorithm. Landslide volume is represented as a statistical distribution from mapped landslides. We validate and apply our approach to the Oregon Coast Range, USA and find that 36 % of river stretches exceed a dam potential threshold; these are in river headwaters and steeper terrain, which in this case correlate with more resistant lithologies. We also estimate volumes of the potential dammed lakes and find that most rivers with high dam susceptibility are less likely to impound large lakes because they have low drainage areas. However, widespread susceptibility, and the potential impacts from exceptionally large landslides, suggest that this hazard should be considered in the Pacific Northwest. The damability function workflow can ingest new data and be applied more broadly to assess future landslide dam hazards.

Oregon↗
USGS2025

3D viscoelastic models of slip-deficit rate along the Cascadia subduction zone

Interseismic deformation in the Pacific Northwest is constrained by the horizontal crustal velocity field derived from the Global Positioning System (GPS) in addition to vertical rates derived from GPS, leveling, and tide gauge measurements. Such measurements were folded in to deformation models of fault slip rates as part of the 2023 National Seismic Hazard Model (NSHM) update. Here I build upon one of the contributing models, the viscoelastic earthquake-cycle model of Pollitz [2022]. This model permits inclusion of effects of time-dependent viscoelastic relaxation within earthquake cycles (i.e., ‘ghost transients’) and laterally variable elastic and/or ductile material properties. I lever-age these capabilities to incorporate the Cascadia megathrust into Western U.S.-wide deformation models in which crustal fault slip rates are estimated simultaneously with slip deficit rates along the interplate boundary between the descending Juan de Fuca plate and North American plate. This effort includes construction of a margin-wide model of viscoelastic structure founded on the Slab 2.0 model and probes different models of the ductile properties of the surrounding oceanic asthenosphere, continental lower crust, and mantle asthenosphere. This results in new estimates of the distribution of slip deficit rate along the ∼ 1000 km long margin, highlights the importance of correcting for glacial-isostatic adjustment effects, and permits assessment of sensitivity of results to assumed ductile properties.

California, Oregon, Washington↗
USGS2026

An entropic explanation for Gutenberg-Richter scaling

We develop a simple explanation for Gutenberg-Richter (G-R) size scaling of earthquakes on a single fault. We discretize the fault and consider all possible contiguous ruptures at that level of discretization. In this static model, we assume that slip scales with rupture length, and that the rupture rates at each point along the fault are consistent with an a priori long-term slip rate. These simple assumptions define an (under-determined) non-negative least-squares inverse problem. Each solution to this inverse problem is a set of earthquake rates that matches the slip-rate constraint. We use a Markov Chain Monte Carlo (MCMC) algorithm to uniformly sample the solution space assuming constant slip rates along the fault. At finer discretizations, deviations from G-R behavior decrease, which is consistent with an entropic pressure towards G-R solutions. When the fault is discretized into 10 or more segments, random solutions found by the MCMC algorithm have G-R size scaling, even though there are trivial solutions that, for example, have earthquakes of only one size. This is because there are simply far more solutions that have G-R scaling; as the problem size increases, the strong degeneracy of GR solutions results in other solutions becoming improbably rare. Also, the entropically favored G-R distribution has a b -value of approximately 1, which agrees with measured b -values in real earthquake catalogs.

JGR Solid Earth↗
USGS2025

Unlocking ecological insights from sub-seasonal visible-to-shortwave infrared imaging spectroscopy: The SHIFT campaign

We stand at the threshold of a transformative era in Earth observation, marked by space-borne visible-to-shortwave infrared (VSWIR) imaging spectrometers that promise consistent global observations of ecosystem function, phenology, and inter- and intra-annual change. However, the full value of repeat spectroscopy, the information embedded within different temporal scales, and the reliability of existing algorithms across diverse ecosystem types and vegetation phenophases have remained elusive due to the absence of suitable sub-seasonal spectroscopy data. In response, the Surface Biology and Geology (SBG) High-Frequency Time Series (SHIFT) campaign was initiated during late February 2022 in Santa Barbara County, California. SHIFT, designed to support NASA's SBG mission, addressed mission scoping, scientific advancement, applications development, and community building. This ambitious endeavor included weekly Airborne Visible InfraRed Imaging Spectrometer-Next Generation (AVIRIS-NG) imagery acquisitions for 13 weeks (spanning February 24 to May 29, 2022), accompanied by coordinated terrestrial vegetation and coastal aquatic data collection. We describe the rich datasets collected and illustrate how the complex sub-seasonal patterns of change can be linked to biological science and applications, surpassing insights from multispectral observations. Leveraging open-source processing methods and cloud-based analysis tools, the SHIFT campaign showcases the readiness of the scientific community to harness ecological insights from remotely sensed hyperspectral time series. We provide an overview of SHIFT's goals, data collections, preliminary results, and the collaborative efforts of early career scientists committed to unlocking the transformative potential of high-frequency time series data from space-borne VSWIR imaging spectrometers.

Ecosphere↗
USGS2025

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California↗
USGS2025

Metaproteomics and metagenomics reveal microbial pathways of organic matter degradation and methanogenesis in a marginally producing natural gas well

The expansion of natural gas production and utilization worldwide has led to the decline of many once-productive wells, eventually resulting in costly well-plugging and unused infrastructure. However, in areas like the Michigan basin, MI, where the majority of natural gas is biogenically produced, microbial communities could potentially be stimulated to generate additional methane, increasing gas supply and reducing the need to drill new wells. In this study, we performed metaproteomic, metagenomic, and geochemical analyses of Antrim Shale formation water from a marginally producing natural gas well to evaluate resident microbial community functions in the context of potential bioenergy production. Functional proteins involved in methanogenesis, degradation/catabolism (including organic matter degradation), biosynthesis, energy utilization, transmembrane transport, and stress response were among the most commonly identified groups. Three metagenome-assembled genomes (MAGs) were characterized, including Methanomicrobiaceae, Methanothrix , and Smithella . For each, the identified proteins involved in methanogenesis and the degradation of diverse organic compounds, strongly suggest their role in utilizing shale-derived organic matter. These findings provide an increased understanding of the microorganisms and their metabolisms generating natural gas in the Antrim Shale and establish a foundation for future stimulation efforts aimed at enhancing biogenic methane production in marginal gas wells.

Michigan↗
USGS2024

Exploring the dynamic interactions between the Southern San Andreas Fault and a normal fault under the Salton Sea

We investigate the dynamic interactions between the Southern San Andreas Fault (SSAF) and a proximal normal fault (NF) beneath the Salton Sea in southern California. The NF, positioned near the SSAF terminus at Bombay Beach, exhibits 11–15 displacement events across 14 stratigraphic sequences, with a range of 0.2–1.4 m of vertical offset since ∼2–3 ka. Notably, four of these events may align temporally with SSAF earthquakes, raising questions about the possible interplay between the two faults. Utilizing dynamic rupture models, we analyze the coseismic interactions between the SSAF and NF, addressing under what conditions the SSAF induces slip on the NF. Our findings reveal that a suite of SSAF ruptures, particularly those propagating from north to south, can trigger slip on the normal fault and replicate observed vertical offsets. If the SSAF extends beneath the Salton Sea, earthquakes originating south of the NF intersection are less likely to trigger normal fault slip, although we cannot exclude this possibility. Some SSAF ruptures do not trigger discernible slip on the NF, rendering such events undetectable in the stratigraphic record. Our research contributes toward discussions regarding the seismic hazard in southern California, shedding light on the interplay between the SSAF and NF.

California↗
USGS2026

Earthquake rupture arrest from depth‐dependent frictional stability on the Pütürge segment of the East Anatolian Fault Zone, Türkiye (Turkey)

Determining why earthquake ruptures stop is a central challenge in earthquake science and seismic hazard assessment. The Pütürge segment of the East Anatolian Fault Zone, Türkiye, exhibits shallow creep (<∼3 km depth) yet hosts M > 6.5 earthquake ruptures at greater depth. Here, we evaluate whether variations in frictional stability along this segment aided arrest of the 2020 M 6.7 Elaziğ and 2023 M 7.8 Pazarcık earthquake ruptures. Analysis of Sentinel‐1 Synthetic Aperture Radar imagery indicates the 2023 M 7.8 rupture propagated laterally into a metamorphic massif within the Pütürge segment, where slip rapidly decayed below detection limits. Creepmeters along this segment recorded no significant surface afterslip (<3 mm) in the following year. To investigate this fault‐slip behavior, we conducted triaxial friction experiments on Pütürge fault gouge sampled from an outcrop exposure. The gouge, composed primarily of muscovite, quartz, and calcite, is velocity strengthening at conditions approximating 0–2.5 km depth and velocity weakening at 4–5 km depth. This transition to velocity‐weakening friction is associated with enhanced comminution and shear localization observed microstructurally. Our results suggest that depth‐dependent frictional stability of the Pütürge fault segment facilitates rupture nucleation and propagation at depth while maintaining rupture‐arresting behavior near Earth’s surface.

Pütürge segment of the East Anatolian Fault Zone↗