A system of computer programs (WAT-MOVE) for transferring data among data bases in the U.S. Geological Survey National Water Information System
Explore the source record for details and available documents.
Open-File Report↗
SEARCH · Geology Reports
Results for “Computers and Geology”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Water resources data for Wyoming, water year 1972; part 1, surface water records
Surface-water records for the 1972 water year for Wyoming, including records of streamflow or reservoir storage at gaging stations, partial-record stations, and miscellaneous sites, are given in this report. The locations of the gaging stations and partial-record stations are shown in figures 1 and 2. Records for a few pertinent gaging stations in bordering States also are included. These data represent that portion of the National Water Data System collected by the U.S. Geological Survey and cooperating State and Federal agencies in Wyoming. The records were collected and computed by the Water Resources Division of the U.S. Geological Survey under the direction of Robert L. Cushman, district chief. Wyoming district personnel who contributed significantly to the collection and preparation of data included in this report were: S.A. Druse, D. J. O'Connell, G. S. Craig, Jr., G. W. Armentrout, Jr., H. W. Lowham, B. H. Ringen, P. B. McCollam, C. F. Obert, W. R. Glass, T.W. Custis, R. L. Muench, J. 0. Ragsdale, M. D. Stevens, J. M. Johnson, and J. L. Lynch. Through September 30, 1960, the records of discharge and stage of streams and canals, and contents and stage of lakes or reservoirs, were published in an annual series of U.S. Geological Survey water-supply papers entitled "Surface Water Supply of the United States." Beginning with the 1961 water year, surface-water records have been released by the Geological Survey in annual reports on a State-boundary basis. Distribution of these reports is limited; they are designed primarily for rapid release of data shortly after the end of the water year to meet local needs. Records of discharge and reservoir storage for 1961-65 have been published in a Geological Survey water-supply paper series entitled "Surface Water Supply of the United States 1961-65." Records of discharge and reservoir storage for 1966-70 also will be published in a Geological Survey water-supply paper series entitled "Surface Water Supply of the United States 1966-70."
Wyoming↗
Water resources data for Wyoming, water year 1973; part 1, surface water records
Surface-water records for the 1973 water year for Wyoming, including records of streamflow or reservoir storage at gaging stations, partial-record stations, and miscellaneous sites, are given in this report. The locations of the gaging stations and partial-record stations are shown in figures 1 and 2. Records for a few pertinent gaging stations in bordering States also are included. These data represent that portion of the National Water Data System collected by the U.S. Geological Survey and cooperating State and Federal agencies in Wyoming. The records were collected and computed by the Water Resources Division of the U.S. Geological Survey under the direction of Robert L. Cushman, district chief. Wyoming district personnel who contributed significantly to the collection and preparation of data included in this report were: S.A. Druse, D. J. O'Connell, G. S. Craig, Jr., G. W. Armentrout, Jr., H. W. Lowham, J. G. Rankl, P. B. McCollam, C. F. Obert, W. R. Glass, T.W. Custis, R. L. Muench, J. O. Ragsdale, M. D. Stevens, R. C. Bauman, J. L. Lynch, and S. L. Green. Beginning with the 1961 water year, streamflow records and related data have been released by the Geological Survey in annual reports on a State-boundary basis. These reports are for limited distribution and are designed primarily for rapid release of data shortly after the end of the water year. Records of discharge and stage of streams and canals, and contents and stage of lakes or reservoirs, are published in a series of U.S. Geological Survey water-supply papers entitled "Surface Water Supply of the United States." Through September 30, 1960, these water-supply papers were in an annual series and since then are in a 5-year series. More information is given under the heading "Publications" on page 9.
Wyoming↗
Water resources data for Wyoming, water year 1974
Surface-water records for the 1974 water year for Wyoming, including records of streamflow or reservoir storage at gaging stations, partial-record stations, and miscellaneous sites, are given in this report. The locations of the gaging stations and partial-record stations are shown in figures 1 and 2. Records for a few pertinent gaging stations in bordering States also are included. These data represent that portion of the National Water Data System collected by the U.S. Geological Survey and cooperating State and Federal agencies in Wyoming. The records were collected and computed by the Water Resources Division of the U.S. Geological Survey under the direction of Sam W. West, district chief. Wyoming district personnel who contributed significantly to the collection and preparation of data included in this report were: S. A. Druse, D. J. O'Connell, G. S. Craig, Jr., G. W. Armentrout, Jr., H. W. Lowham, J. G. Rankl, P. B. McCollam, C. F. Obert, W. R. Glass, D. J. Pangburn, T. W. Custis, R. L. Muench, J. O. Ragsdale, M. D. Stevens, R. C. Bauman, D. J. Wangsness, L. W. Lenfest, B. C. Pedersen, M. T. O'Grady, and S. L. Green. Beginning with the 1961 water year, streamflow records and related data have been released by the Geological Survey in annual reports on a State-boundary basis. These reports are for limited distribution and are designed primarily for rapid release of data shortly after the end of the water year. Records of discharge and stage of streams and canals, and contents and stage of lakes or reservoirs, are published in a series of U.S. Geological Survey water-supply papers entitled "Surface Water Supply of the United States." Through September 30, 1960, these water-supply papers were in an annual series and since then are in a 5-year series. More information is given under the heading "Publications" on page 9.
Wyoming↗
Geologic map of the State of Hawai`i
The State's geology is presented on eight full-color map sheets, one for each of the major islands. These map sheets, the illustrative meat of the publication, can be downloaded in pdf format, ready to print. Map scale is 1:100,000 for most of the islands, so that each map is about 27 inches by 36 inches. The Island of Hawai`i, largest of the islands, is depicted at a smaller scale, 1:250,000, so that it, too, can be shown on 36-inch-wide paper. The new publication isn't limited strictly to its map depictions. Twenty years have passed since David Clague and Brent Dalrymple published a comprehensive report that summarized the geology of all the islands, and it has been even longer since the last edition of Gordon Macdonald's book, Islands in the Sea, was revised. Therefore the new statewide geologic map includes an 83-page explanatory pamphlet that revisits many of the concepts that have evolved in our geologic understanding of the eight main islands. The pamphlet includes simplified page-size geologic maps for each island, summaries of all the radiometric ages that have been gathered since about 1960, generalized depictions of geochemical analyses for each volcano's eruptive stages, and discussion of some outstanding topics that remain controversial or deserving of additional research. The pamphlet also contains a complete description of map units, which enumerates the characteristics for each of the state's many stratigraphic formations shown on the map sheets. Since the late 1980s, the audience for geologic maps has grown as desktop computers and map-based software have become increasingly powerful. Those who prefer the convenience and access offered by Geographic Information Systems (GIS) can also feast on this publication. An electronic database, suitable for most GIS software applications, is available for downloading. The GIS database is in an Earth projection widely employed throughout the State of Hawai`i, using the North American datum of 1983 and the Universal Transverse Mercator system projection to zone 4. 'This digital statewide map allows engineers, consultants, and scientists from many different fields to take advantage of the geologic database,' said John Sinton, a geology professor at the University of Hawai`i, whose new mapping of the Wai`anae Range (West O`ahu) appears on the map. Indeed, when a testing version was first made available, most requests came from biologists, archaeologists, and soil scientists interested in applying the map's GIS database to their ongoing investigations. Another area newly depicted on the map, in addition to the Wai`anae Range, is Haleakala volcano, East Maui. So too for the active lava flows of Kilauea volcano, Island of Hawai`i, where the landscape has continued to evolve in the ten years since publication of the Big Island's revised geologic map. For the other islands, much of the map is compiled from mapping published in the 1930-1960s. This reliance stems partly from shortage of funding to undertake entirely new mapping but is warranted by the exemplary mapping of those early experts. The boundaries of all map units are digitized to show correctly on modern topographic maps.
Hawaii↗
Records of wells and chemical analyses of ground water in Hand and Hyde counties, South Dakota
Well and chemical groundwater data contained in three tables were collected during a 4-year study started in 1972 to determine the geology and water resources of Hand and Hyde Counties, South Dakota. Physical, hydrologic, and geologic data for 2,729 wells and test holes have been entered into computer storage in the Groundwater Site Inventory File of the U.S. Geological Survey 's National Water Data Storage and Retrieval System WATSTORE. Water quality data from 300 chemical analyses has been stored in the Water Quality File of WATSTORE and is computer printed int he chemical analyses table by aquifer. (USGS)
Open-File Report↗
A terracing operator for physical property mapping with potential field data
The terracing operator works iteratively on gravity or magnetic data, using the sense of the measured field's local curvature, to produce a field comprised of uniform domains separated by abrupt domain boundaries. The result is crudely proportional to a physical-property function defined in one (profile case) or two (map case) horizontal dimensions. This result can be extended to a physical-property model if its behavior in the third (vertical) dimension is defined, either arbitrarily or on the basis of the local geologic situation. The terracing algorithm is computationally fast and appropriate to use with very large digital data sets. Where gravity and magnetic data are both available, terracing provides an effective means by which the two data sets can be compared directly. Results of the terracing operation somewhat resemble those of conventional susceptibility (or density) mapping. In contrast with conventional susceptibility mapping, however, the terraced function is a true step function, which cannot be depicted by means of contour lines. Magnetic or gravity fields calculated from the physical-property model do not, in general, produce an exact fit to the observed data. By intent, the terraced map is more closely analogous to a geologic map in that domains are separated by hard-edged domain boundaries and minor within-domain variation is neglected. The terracing operator was applied separately to aeromagnetic and gravity data from a 136 km X 123 km area in eastern Kansas. Results provide a reasonably good physical representation of both the gravity and the aeromagnetic data. Superposition of the results from the two data sets shows many areas of agreement that can be referenced to geologic features within the buried Precambrian crystalline basement. The emerging picture of basement geology is much better resolved than that obtained either from the scanty available drill data or from interpretation of the geophysical data by inspection.
Geophysics↗
Methods for estimating selected low-flow statistics at gaged and ungaged stream sites in Massachusetts
The U.S. Geological Survey, in cooperation with the Massachusetts Department of Conservation and Recreation, Office of Water Resources, computed selected at-site streamflow statistics at U.S. Geological Survey streamgages in and near Massachusetts and developed regional regression equations for estimating selected streamflows at ungaged stream sites in Massachusetts. Two sets of regional regression equations were developed: (1) the “mainland” equations, for mainland Massachusetts excluding the area covered by the second set, and (2) the “southeastern” equations, for the Plymouth-Carver-Kingston-Duxbury aquifer area in southeastern Massachusetts and for Cape Cod. The regression equations and at-site statistics may be used by Federal, State, and local water managers in addressing water-resources issues relevant in Massachusetts. Regional regression analyses for the mainland equations were developed to estimate the following 27 streamflow statistics: 99-, 98-, 95-, 90-, 85-, 80-, 75-, 70-, 60-, and 50-percent flow durations; monthly June, July, August, and September 90- and 50-percent flow durations; February, June, and August median of the monthly means; harmonic mean; and medians of the following annual low-flow frequency statistics: 7-day; 7-day, 2-year; 7-day, 10-year; 30-day, 2-year; and 30-day, 10-year. The analyses used 81 streamgages with minimal to no regulations in and near Massachusetts. The regression analyses determined that four basin characteristics—drainage area, combined hydrologic soils A and B, streamflow variability index, and annual mean temperature—were the only significant explanatory variables for the different mainland equations. Regional regression equations were developed for the Plymouth-Carver-Kingston-Duxbury aquifer area in southeastern Massachusetts and Cape Cod, because surface-water drainage areas and groundwater contributing areas do not always coincide in this area of the State. The regression analyses to estimate 10 flow durations from the 99th to 50th percentiles used 18 streamflow sites with some occasional minor regulations—because there are few unregulated streams in southeastern Massachusetts. The analyses determined that groundwater contributing area and storage (combined water bodies and wetlands) were the only significant explanatory variables in the southeastern equations.
Massachusetts↗
Carnotite resources of the Spud Patch area, San Miguel County, Colorado
The Spud Patch area comprises about 8 square in T. 43 M., R. 18 and 19 W., San Miguel County, Colo., and is about 4 miles northeast of Egnar, Colo. Claims of the United States Vanadium Co. and the Vanadium Corp. of America cover about half the area. Claims of other owners, public land, and patented agricultural land, comprise the remainder of the area. The area is about 38 miles from the Government mill at Montecello, Utah, and 55 miles from the Vanadium Corp. of America mill at Naturita, Colo. Between 1940 and 1951, the Spud Patch area yielded about 24,000 short tons of carnotite ore that probably averaged 0.21 percent U 3 O 8 and 2.2 percent V 2 O 5 . The deposits are in a broad sandstone lens near the top of the Salt Wash member of the Jurassic Morrison formation. Although the deposits mined have been mainly impregnations of sandstone by carnotite and gray vanadium-bearing clay minerals, some of the richer deposits found by Geological Survey drilling have a finely disseminated black uranium mineral but no carnotite. The deposits commonly are thin irregular tabular layers, which locally thicken to form elongate masses called "rolls". These rolls have a dominant northeasterly trend. Geologic features found to be most useful as guides to ore are listed. From November 1949 to May 1952, the U.S. Geological Survey drilled 415 diamond-drill holes totaling 67,215 feet in the Spud Patch area. The purpose of this drilling was to find deposits that would make new mines and to appraise the reserves in the unexplored area. As a result of Geological Survey drilling, indicated and inferred reserves computed at the cutoff of 1 foot or more thick and 0.10 percent U 3 O 8 or 1.0 percent V 2 O 5 total 20,500 short tons, averaging 0.28 percent U 3 O 8 and 2.1 percent V 2 O 5 . These reserves and those computed at a lower grade cutoff of 0.05 percent U 3 O 8 or 0.50 percent V 2 O 5 and the pounds of contained metal are summarized in table 1. Potential reserves, whose existence is based on geologic evidence alone, are predicted to total about 42,000 short tons, averaging 0.25 percent U 3 O 8 and 2.0 percent V 2 O 5 . No additional exploratory-type drilling by the Geological Survey is planned in the Spud Patch area. Recommendations are offered for additional development-type drilling, preferably by claim owners or lessees in specific areas in the vicinity of deposits discovered by Geological Survey drilling.
Colorado↗
Coal-seismic, desktop computer programs in BASIC; Part 7, Display and compute shear-pair seismograms
Processing of geophysical data taken with the U.S. Geological Survey's coal-seismic system is done with a desk-top, stand-alone computer. Programs for this computer are written in the extended BASIC language utilized by the Tektronix 4051 Graphic System. This report discusses and presents five computer pro grams used to display and compute shear-pair seismograms.
Open-File Report↗
Records of wells and chemical analyses of ground water in Deuel and Hamlin counties, South Dakota
Well and chemical groundwater data contained in three tables were collected during a 5-year study started in 1971 to determine the geology and water resources of Deuel and Hamlin Counties, South Dakota. Physical, hydrologic, and geologic data for 3,228 wells and test holes have been entered into computer storage in the Ground-Water Site Inventory File of the U.S. Geological Survey 's National Water Data Storage and Retrieval System (WATSTORE). The well tables in the report are computer printouts from WATSTORE. Water quality data from 564 chemical analyses have been stored in the Water-Quality File of WATSTORE and is computer printed in the chemical analyses table by aquifer. (USGS)
Open-File Report↗
Progress toward a preliminary karst depression density map for the conterminous United States
Most methods for the assessment of sinkhole hazard susceptibility are predicated upon knowledge of pre-existing closed depressions in karst areas. In the United States (U.S.), inventories of existing karst depressions are piecemeal, and are often obtained through inconsistent methodologies applied at the state or county level and at various scales. Here, we present a first attempt at defining a karst closed depression inventory across the conterminous U.S. using a common methodology. Automated algorithms for extraction of closed depressions from 1/3 arc-second (approximately 10 m resolution) National Elevation Dataset (NED) were run on the U.S. Geological Survey (USGS) “Yeti” high-performance computing cluster. The full NED was first conditioned to reduce the creation of artificial closed depressions by breaching digital dams at road and stream crossings, using the flowlines and transportation route vectors from the USGS National Map. The resulting depressions were selected according to location within geologic units having the potential for karst, and screened for occurrence in areas of developed land, open water and wetlands, and areas of glacial and alluvial sediment cover. The results were used as the input to create a nationwide depression density map. Our results were compared with karst depression density maps for diverse karst regions within states that have existing closed depression inventories. The individual state-scale maps compared favorably to the results obtained from the method applied universally across the nation and illustrated regional sinkhole hotspots in known areas of well-developed karst. Limitations of the automated method includes false positive depressions resulting from artifacts generated during the computer processing of the elevation models, and inclusion of depressions resulting from non-karst geomorphic processes. More thorough examination of the screening criteria for depressions is required.
Conterminous United States↗
Standardization of gravimeter calibrations in the geological survey
The calibration of gravimeters has long been primarily the concern of geodesists involved in measuring large gravity differences, but recent developments suggest that the precision and stability of gravimeter calibrations may have greater geologic importance in the future. First, the use of high-speed computers and an increasing variety of supplemental data now make possible the geologic interpretation of gravity anomalies so small that they would not have been noticed in surveys made ten years ago. The kind of gravity interpretation that identifies small reefs and local accumulations of petroleum [ McCulloh , 1967] often requires local increases in station density and the assurance that the calibration of meters used in all parts of a survey are compatible. Second, temporal changes of gravity have already been measured in connection with earthquakes [ Barnes , 1966], volcanic eruptions [ Iida et al , 1952], and the movement of ice caps [ Behrendt , 1967]; they are now being considered for several other types of geologic processes.
Alaska, Arizona, California, Colorado, Oregon, Was↗
Global Land Information System (GLIS)
The Global Land Information System (GLIS) is an interactive computer system developed by the U.S. Geological Survey (USGS) for scientists seeking sources of information about the Earth's land surfaces. GLIS contains "metadata," that is, descriptive information about data sets. Through GLIS, scientists can evaluate data sets, determine their availability, and place online requests for products. GLIS is more, however, than a mere list of products. It offers online samples of earth science data that may be ordered through the system.
General Information Product↗
Simulating contaminant attenuation, double-porosity exchange, and water age in aquifers using MOC3D
MOC3D is a general-purpose computer model developed by the U.S. Geological Survey (USGS) for simulation of three-dimensional solute transport in ground water (Konikow and others, 1996). The model is an update to the widely used USGS two-dimensional solute-transport model (MOC) and is implemented as an optional “package” for the ground-water flow model MODFLOW (Harbaugh and McDonald, 1996). Directly coupling the time-tested MOC transport algorithms with the widely used MODFLOW program makes MOC3D a powerful tool for simulation of solute transport in ground water in many hydrogeologic settings. The model simulates transport processes that include: Advection - Transport of dissolved solutes at the same rate as the average ground-water flow velocity. Diffusion - Spreading of solute from areas of high concentration to areas of low concentration, caused by “random” molecular motion Dispersion - Diffusion-like spreading of solute that is caused primarily by spatial variability in aquifer properties, which results in spatial variability in transport velocity. Retardation - Reduction in the apparent solute velocity, compared to the ground-water velocity, caused by linear equilibrium sorption on aquifer materials. Decay - Disappearance of solute caused by reactions such as radioactive decay or biodegradation that are proportional to concentration. Growth - Creation (or disappearance) of solute mass caused by reactions that proceed independent of the solute concentration, such as some cases of biodegradation Double-porosity exchange - rate-limited exchange of solute mass between mobile and immobile zones; for example, between fractures and the rock matrix.
Fact Sheet↗
Magnitude and frequency of floods for rural streams in Georgia, South Carolina, and North Carolina, 2017—Summary
Reliable flood-frequency estimates are important for hydraulic structure design and floodplain management in Georgia, South Carolina, and North Carolina. Annual peak streamflows (hereafter, referred to as peak flows) measured at 965 U.S. Geological Survey streamgages were used to compute flood-frequency estimates with annual exceedance probabilities (AEPs) of 50, 20, 10, 4, 2, 1, 0.5, and 0.2 percent. These AEPs correspond to flood-recurrence intervals of 2, 5, 10, 25, 50, 100, 200, and 500 years, respectively. A subset of these streamgages (801) were used to develop equations to predict the AEP flood flows at ungaged stream locations. This study was completed by the USGS in cooperation with the Georgia, South Carolina, and North Carolina Departments of Transportation and the North Carolina Department of Crime Control and Public Safety, and the results are summarized in this fact sheet. The complete results and the supporting data are presented in the companion scientific investigations report and data release.
Georgia, North Carolina, South Carolina↗
Connecticut Highlands technical report— Documentation of the regional rainfall-runoff model
This report provides the supporting data and describes the data sources, methodologies, and assumptions used in the assessment of existing and potential water resources of the Highlands of Connecticut and Pennsylvania (referred to herein as the “Highlands”). Included in this report are Highlands groundwater and surface-water use data and the methods of data compilation. Annual mean streamflow and annual mean base-flow estimates from selected U.S. Geological Survey (USGS) gaging stations were computed using data for the period of record through water year 2005. The methods of watershed modeling are discussed and regional and sub-regional water budgets are provided. Information on Highlands surface-water-quality trends is presented. USGS web sites are provided as sources for additional information on groundwater levels, streamflow records, and ground- and surface-water-quality data. Interpretation of these data and the findings are summarized in the Highlands study report.
Connecticut↗
Documentation of a computer program to estimate the head in a well of finite radius using the U.S. Geological Survey modular finite difference ground-water flow model
Explore the source record for details and available documents.
Open-File Report↗