Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Applied Computing and Geosciences.”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,657 records · Page 10Linked to original sources
USGS2024

Estimation of reservoir storage capacity and geomorphic change detection analysis from a multibeam bathymetric survey of Randy Poynter Lake, Rockdale County, Georgia

Rockdale County Department of Water Resources has a directive to update estimates of the reservoir storage capacity of Randy Poynter Lake, located in northern Georgia, and to assess recent sedimentation and associated storage capacity loss. In 2022, the U.S. Geological Survey completed a multibeam bathymetric survey of Randy Poynter Lake to update storage capacity estimates and to quantify storage capacity change since the first multibeam bathymetric survey in 2012 in consideration of estimated errors inherent to bathymetric surveys. Data from the 2022 survey were used to generate contours of the reservoir as well as compute storage capacity at regular increments of water-surface elevation. Storage capacity comparisons between 2012 and 2022 at Randy Poynter Lake show minimal changes that are within the estimated uncertainties, with consistent or slightly increased storage capacities observed at most water-surface elevations and reductions observed at the remaining few elevations. Comparison of the multibeam bathymetric data collected in 2012 with data collected in 2022 further allowed for a formal geomorphic change detection analysis to map, quantify, and infer causation of morphological change over time with respect to a level of detectable change. The volume change in Randy Poynter Lake for the decade between 2012 and 2022 was slightly net-depositional and within the estimated uncertainty. The spatial distribution of sediment deposition was primarily concentrated in the northern portion of the lake, where the principal tributary flows into Randy Poynter Lake. The results of the geomorphic change analysis were used to further understand the future implications to storage capacity change. Despite the challenges of confirming systematic biases because of uncertainties exceeding the observed changes, insights from the study help predict long-term reservoir sediment accumulation, indicating a reservoir half-life extending about 650 years from 2022 on the basis of the current sediment yield estimates.

Georgia↗
USGS2025

The GorDAS Distributed Acoustic Sensing experiment above the Cascadia locked zone and subducted Gorda Slab

The southernmost portion of the Cascadia Subduction zone in Northern California produces high rates of moderate and large earthquakes owing to subduction of the Gorda slab and deformation associated with the Mendocino Triple Junction. Distributed Acoustic Sensing (DAS) is rapidly advancing as a method for detecting earthquakes and imaging crustal structure. We have begun a long-term DAS monitoring experiment on buried telecom fiber in Arcata, California, with the goal of increasing the available recordings of moderate to large earthquakes as well as imaging seismogenic structures. We have recorded over a year's worth of data, including most aftershocks of the 2022 M w 6.4 Ferndale earthquake, though not the mainshock itself. The dataset includes numerous magnitude 3.5 and larger earthquakes including the 2023/01/01 M w 5.4 Rio Dell earthquake. Here we present initial results comparing an earthquake detection algorithm, run in real-time on the processing unit of the interrogator system, with both the ShakeAlert earthquake early warning system as well as a post-processed earthquake catalog developed with deep-learning phase-picker algorithms. The rapid onboard processing of the detector demonstrates the potential utility of DAS-based edge computing for earthquake early warning. We also verify the quality of the strain waveforms both in terms of peak amplitudes and waveform similarity using about five months of nodal seismometer data. These instruments were deployed roughly every 300 m along the ~15km long cable and validate large variations in peak strain over short distances that are seen in the DAS data. All data from time windows surrounding both the local and teleseismic earthquakes are publicly available, which will improve our understanding of both the performance of DAS systems in moderate earthquakes and earthquake hazards associated with the Gorda subduction zone.

California↗
USGS2024

Framework for mapping liquefaction hazard–Targeted design ground motions

Liquefaction-induced ground failure poses substantial challenges to geotechnical earthquake engineering design. Current approaches for designing against liquefaction hazards, as specified in most seismic provisions, focus on estimating a liquefaction factor of safety ( 𝐹⁢𝑆𝐿 ) and typically characterize earthquake loading using design parameters based on probabilistic or deterministic ground motion levels. Because 𝐹⁢𝑆𝐿 is estimated deterministically, this basis of design neglects considerable uncertainties for estimating liquefaction triggering and its consequences and results in a lack of liquefaction-specific design criteria, particularly as structural design has advanced toward risk-targeted performance objectives. This study presents a framework for developing liquefaction-targeted design criteria based on a minimum acceptable return period of liquefaction, informed by probabilistic liquefaction hazard analysis (PLHA). PLHA quantifies annualized rates of liquefaction by considering contributions from (1) the full ground-motion probability space, and (2) uncertainties in liquefaction triggering using probabilistic models. PLHA is used in this study to characterize the current, effective return periods of 𝐹⁢𝑆𝐿 ( 𝑇𝑅,𝐹⁢𝑆 ) obtained from conventional liquefaction hazard analysis (CLHA) using uniform-hazard ground motions. 𝑇𝑅,𝐹⁢𝑆 is evaluated in a parametric study of nearly 100 sites throughout the conterminous United States. The results indicate large geographic variations in acceptable liquefaction hazard levels, with implied 𝑇𝑅,𝐹⁢𝑆 ranging between approximately 1,000 to 3,000 years. To address these inconsistencies without the computational demands of full PLHA, a framework is proposed for developing a liquefaction-targeted design peak ground acceleration, 𝑃⁢𝐺⁢𝐴𝐿 , for use in liquefaction models that result in consistent liquefaction design levels across all geographic locations. The mapped 𝑃⁢𝐺⁢𝐴𝐿 is shown to be somewhat sensitive to site-specific properties, and adjustment factors are developed and presented. The proposed 𝑃⁢𝐺⁢𝐴𝐿 mapping procedure produces 𝐹⁢𝑆𝐿 estimates that are consistent with those obtained from full PLHA at a target 𝑇𝑅,𝐹⁢𝑆 , providing a promising roadmap to incorporating PLHA concepts into current liquefaction design methods.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2026

Suitability of ground-motion models for seismic hazard assessment in Puerto Rico and the U.S. Virgin Islands

We perform linear mixed-effects analyses with a ground-motion dataset to evaluate how well ground-motion models (GMMs) fit active crustal, subduction interface, and subduction intraslab earthquakes in Puerto Rico and the US Virgin Islands. Most of the GMMs reproduce the spatial variation in peak ground motions with earthquake magnitude and rupture distance but predict ground motions 0.3–1.0 natural log units (35%–270%) greater than observations. Two GMMs developed for Puerto Rico that are based on ground-motion records from mostly magnitude 4–5 earthquakes do not perform as well. We attribute the period-dependent overprediction in observed ground motions to differences between the observed site response and the linear site response in the GMMs. Consequently, we developed region-specific GMMs by adjusting the period-dependent linear site response coefficients and period-dependent constant coefficients to remove most of the bias between predicted ground motions and observations. For the analysis, we compile ground-motion records and process waveforms to build a dataset with 10,127 records at 72 stations from 849 magnitude 4.0–6.4 earthquakes between 1 January 2006 and 31 March 2024. The earthquakes include active crustal, subduction interface, and subduction intraslab events. We evaluate the GMMs using the time-averaged shear wave speed in the top 30 m ( ), which we compile from site surveys and proxy values computed from horizontal to vertical spectral ratios. Site terms exhibit strong consistency across GMMs and crustal and subduction earthquakes, indicating that the linear mixed-effects analysis successfully isolates the effects of local site response. The event terms show little spatial correlation and more substantial variability than in other regions, which we attribute to uncertainties in the earthquake magnitudes. This analysis guides the selection of the GMMs for the 2025 update of the National Seismic Hazard Model for Puerto Rico and the US Virgin Islands.

Puerto Rico, U.S. Virgin Islands↗
USGS2024

Imaging of seismic discontinuities using an adjoint method

For imaging of seismic discontinuities at depth, reverse time migration (RTM) is a powerful method to apply to recordings of seismic events. It is especially powerful when an extensive receiver array, numerous seismic sources, or both, permit adequate reconstruction of incident and scattered wavefields at depth. Reconstructing either the incident or scattered wavefield at depth becomes less accurate when relatively few recordings of seismic events are available. Here we explore an inverse scattering approach to imaging discontinuities based on an adjoint method, employing sensitivity kernels (Frechet derivatives) that represent jumps in material properties across seismic-discontinuity surfaces. When combined with ray-based requirements on scattering geometry, it constitutes a powerful approach to determining the locations and amplitudes of the discontinuities, recovering only those properties that can be resolved by a spatially limited source and/or receiver distribution. This is illustrated by synthetic examples with local sources followed by a field example in a subduction zone setting

Washington↗
USGS2024

Global variability of the composition and temperature at the 410-km discontinuity from receiver function analysis of dense arrays

Seismic boundaries caused by phase transitions between olivine polymorphs in Earth's mantle provide thermal and compositional markers that inform mantle dynamics. Seismic studies of the mantle transition zone often use either global averaging with sparse arrays or regional sampling from a single dense array. The intermediate approach of this study utilizes many densely spaced seismic arrays distributed around the globe. We systematically compute teleseismic P-to-S receiver functions for each seismic array and invert for the 1-D seismic velocity structure of the mantle transition zone beneath each array to facilitate a comparison between densely sampled regions. We stack 3,600 receiver functions on average at 67 arrays in total. The stack is used in a probabilistic inversion to estimate the mantle transition zone interface depths and velocities beneath each array. We focus on the 410-km discontinuity (410) because it is a prominent seismic interface that is clearly linked to a single mineral phase transition between olivine and wadsleyite. The depths and velocity contrasts of the 410 are mapped to temperatures and compositions using mineral physics constraints. The depth of the 410 ranges from ∼405–440 km, which is consistent with a ∼360 K temperature range in a dry mantle and a ∼260 K temperature range in a wet mantle (2 wt. % water). The Vs contrast across the 410 ranges from ∼2.5–8 %, which is consistent with ∼20–70 vol. % olivine composition in a dry mantle and ∼25–80 vol. % in a wet mantle. The bulk composition of the upper mantle near the 410-km discontinuity is typically considered to be well-mixed because there is no thermodynamic impediment to convection at the olivine to wadsleyite phase transition. However, the wide range of inferred olivine content from our study suggests that there are large lateral variations in the bulk composition of the upper mantle near the 410-km discontinuity.

Earth and Planetary Science Letters↗
USGS2026

Groundwater drought in the United States: Spatial and temporal variability

Many communities and ecosystems in the United States that are dependent on groundwater are potentially adversely affected by groundwater drought. We computed yearly groundwater-drought metrics and mean groundwater levels at well locations across the conterminous United States (CONUS), using data from wells and remotely sensed and modeled Gravity Recovery and Climate Experiment Drought Monitor Data Assimilation (GRACE-DADM). We also modeled the probability of low or high human impact at each well location. The spatial distribution of groundwater-drought duration and severity from 2001 to 2020 for 1,510 wells shows longer maximum duration and higher maximum severity events in drier regions like the Southwest than in wetter regions like the Northeast. Based on 613 wells in CONUS from 1981 to 2020, there are many significant decreases in drought duration and severity in the Northeast and many significant increases in annual-mean groundwater levels. In contrast, there are many significant increases in drought metrics and decreases in mean water levels in parts of the Southeast. There are major differences in trends from 2001 to 2020 between well-based and GRACE-DADM-based groundwater metrics in some CONUS regions and a very low correlation between trends at individual locations across CONUS. A potential reason for this disparity is the low GRACE-DADM resolution (∼12 km) and the potential for a large amount of groundwater variation at the local scale. Also, GRACE-DADM represents shallow, unconfined aquifers which may not match the screened interval of the monitoring wells we evaluated. Large spatial gaps in long-term, high frequency, and quality-assured groundwater-well monitoring data present a challenge for understanding groundwater-drought variability across CONUS. Remote sensing tools such as GRACE can help but cannot fully replace well monitoring, as highlighted by our study results. Substantially more long-term monitoring wells would more accurately represent groundwater-drought trends and spatial variability across CONUS, particularly in western regions.

conterminous United States↗
USGS2026

As above, so below? A framework for integrating long-term water quantity trends reveals divergent patterns in groundwater and low streamflow across the United States

Climate, land-use, and disturbance drive long-term global trends in groundwater levels and streamflow. At large scales, these trends are typically considered separately, despite the well-established concept that groundwater and surface water comprise a single resource. Joint trend assessment at national scales is challenging because it requires pairing and aggregating data from spatially disparate streamflow and groundwater monitoring sites for which no established framework exists. Here, we evaluate alternative approaches for integrating groundwater and streamflow data to enable joint trend analysis—a critical step toward understanding how water-budget components respond concurrently and interactively to environmental drivers. Mann–Kendall trends were computed for individual groundwater (annual mean depth) and streamflow (annual low of 7 d averages) sites across the U.S over 21- (2000–2020), 31- (1990–2020), and 41-year (1980–2020) periods. Regional Kendall trends were calculated using five spatially contiguous and noncontiguous regional classifications for aggregation based on subsurface (e.g. aquifer, geology) and surface (e.g. watershed, landscape) characteristics. Site-level results revealed contrasting trends, with tendencies toward increasing low flows (wetting) and increasing groundwater depths (drying). Agreement between streamflow and groundwater trends increased with regional aggregation and longer timeframes, though persistent skew toward streamflow wetting and groundwater drying remained. Results varied by region and trend period, with notable consistencies: unified drying in the West/Southwest and wetting in the Upper Midwest. Directional mismatches in long-term trends were prominent in the High Plains and Mississippi Alluvial Plain, whereas near-term mismatches were most evident in the Northwest. Aggregation by hydrologic landscape regions (HLR) yielded the greatest agreement between groundwater and streamflow trends. These findings indicate that coupled responses may represent combined influences of climate, relief, and geology, as captured by HLR, more strongly than geography or geology alone. Integrated water availability assessments may benefit from a multi-characteristic classification framework to treat groundwater and surface water as a unified resource.

Environmental Research: Water↗
USGS2025

Memory and jamming in fault zone sediments

Many subsurface processes involve transitions in granular material states, from arrested to creeping to flowing. Experiments and frameworks for idealized systems reveal that granular fabrics develop during shearing, co-evolve with applied stress, and govern such transitions. We use microtomography to test whether fabrics at two San Andreas fault sites reflect slip history and whether idealized frameworks extend to nature. Near-surface sediments within the fault zone transition between deformation patterns over the seismic cycle, including bulk/localized grain re-arrangements, individual grain fracturing, and localized zones of fracturing. Aseismic and co-seismic shearing produce distinct preferred grain orientations. Co-seismic fabrics can be preserved after centuries of aseismic strain, aseismic fabrics may be overprinted, and grain size and coordination number influence the fabrics. Idealized frameworks, namely anisotropic critical state theory, frictional jamming, and material memory, can explain our observations, and fault zone sediments likely undergo cycles of memory creation and erasure that influence rigidity spatiotemporally.

California↗
USGS2026

End-user needs for remote sensing wetlands of the Prairie Pothole Region of North America

The Prairie Pothole Region (PPR) of North America comprises globally important grassland and wetland ecosystems critical for numerous populations of migratory birds. Due to the importance of this region for migratory birds, and particularly waterfowl, and the threats of habitat loss due to intensifying agriculture, there is a mature and diverse system of conservation organizations, agencies, and partnerships that spends hundreds of millions of dollars annually on habitat conservation to support migratory bird populations. Remote sensing can be a powerful tool for observing and evaluating global change at large scales as well as expanding inferences from field studies to the broader landscape with statistical models. However, development and utilization of these tools has lagged behind their demand for several reasons, including concerns over spatial and temporal resolution and accuracy of products; perception of a misalignment with decision-maker needs; technological barriers such as skill sets of conservation professionals, computing resources, data access, and usability. In this report, we summarize the needs of conservation professionals and scientists who use or want to use remote sensing data products to inform science about wetland change and conservation of wetlands in the PPR. We assembled this information through several methods leading up to, during, and following a January 2026 PPR Wetland Remote Sensing Workshop. The workshop included United States and Canadian scientists, conservation professionals, and policy experts. Our goal was to bring together end-users and remote sensing product developers jointly to explore reducing the lag between product development and utilization of products to inform science and conservation. Specifically, we aimed to identify gaps in wetland remote sensing that limit effective monitoring, management, and conservation in the PPR, and to develop a framework that outlines pathways to address these gaps by fostering collaboration, improving communication networks, encouraging discussion, and building on existing and ongoing efforts. This report summarizes our participants’ descriptions of end-user needs and the outcomes of the workshop.

Prairie Pothole region↗
USGS2025

Methods for estimating selected low-flow statistics at gaged and ungaged stream sites in Massachusetts

The U.S. Geological Survey, in cooperation with the Massachusetts Department of Conservation and Recreation, Office of Water Resources, computed selected at-site streamflow statistics at U.S. Geological Survey streamgages in and near Massachusetts and developed regional regression equations for estimating selected streamflows at ungaged stream sites in Massachusetts. Two sets of regional regression equations were developed: (1) the “mainland” equations, for mainland Massachusetts excluding the area covered by the second set, and (2) the “southeastern” equations, for the Plymouth-Carver-Kingston-Duxbury aquifer area in southeastern Massachusetts and for Cape Cod. The regression equations and at-site statistics may be used by Federal, State, and local water managers in addressing water-resources issues relevant in Massachusetts. Regional regression analyses for the mainland equations were developed to estimate the following 27 streamflow statistics: 99-, 98-, 95-, 90-, 85-, 80-, 75-, 70-, 60-, and 50-percent flow durations; monthly June, July, August, and September 90- and 50-percent flow durations; February, June, and August median of the monthly means; harmonic mean; and medians of the following annual low-flow frequency statistics: 7-day; 7-day, 2-year; 7-day, 10-year; 30-day, 2-year; and 30-day, 10-year. The analyses used 81 streamgages with minimal to no regulations in and near Massachusetts. The regression analyses determined that four basin characteristics—drainage area, combined hydrologic soils A and B, streamflow variability index, and annual mean temperature—were the only significant explanatory variables for the different mainland equations. Regional regression equations were developed for the Plymouth-Carver-Kingston-Duxbury aquifer area in southeastern Massachusetts and Cape Cod, because surface-water drainage areas and groundwater contributing areas do not always coincide in this area of the State. The regression analyses to estimate 10 flow durations from the 99th to 50th percentiles used 18 streamflow sites with some occasional minor regulations—because there are few unregulated streams in southeastern Massachusetts. The analyses determined that groundwater contributing area and storage (combined water bodies and wetlands) were the only significant explanatory variables in the southeastern equations.

Massachusetts↗
USGS2025

Near-surface material and topography generate anomalous high-frequency ground motion amplification in Chugiak, Alaska

An ∼3 km long nodal array oriented approximately east–west was deployed in Chugiak, Alaska, by the U.S. Geological Survey during 2021. The array intersects with the permanent NetQuakes station NP.ARTY, where peak ground acceleration (PGA) value of 1.98 g was recorded during the 2018 M w 7.1 Anchorage, Alaska, earthquake, in sharp contrast to the PGA of ∼0.3 g at a site just 4 km to the west. Seismic data for M w 1.8–4.3 aftershocks from the M w 7.1 event recorded by the nodal array confirm the anomalously large ground motions obtained at NP.ARTY as well as similar amplifications at nodes within ∼1 km to the east. Here, we performed 0–10 Hz 3D finite‐difference simulations, including high‐resolution surface topography, to explore the cause of the unexpectedly large amplification. As expected, the simulations computed with a regional 3D tomography velocity model severely underpredict the 0–10 Hz acceleration records at almost all sites. Adding a near‐surface low‐velocity taper to 300 m depth amplifies the accelerations by up to a factor of 5 and enables a reasonable match between the nodal data and simulations at sites to the west of NP.ARTY. However, this model still underpredicts the spectral energy in the area covered by glacial sediments by up to an order of magnitude. The addition of a till layer using a depth‐dependent shear‐wave velocity ( ⁠⁠ V s ) profile along with a homogeneous, 8 m thick low‐velocity layer with V s = 250 m/s representing the kame terraces improves the fit to data to within a factor of 2 at nodes located on top of the glacial sediments. Our study shows that the anomalously large high‐frequency amplification recorded at and near NP.ARTY can be explained by a combination of topographic effects and near‐surface low‐velocity material with amplification effects on the high‐frequency ground motion by up to about 40% and an order of magnitude, respectively.

Alaska↗
USGS2024

The impact of source time function complexity on stress drop estimates

Earthquake stress drop—a key parameter for describing the energetics of earthquake rupture—can be estimated in several different, but theoretically equivalent, ways. However, independent estimates for the same earthquakes sometimes differ significantly. We find that earthquake source complexity plays a significant role in why theoretically (for simple rupture models) equivalent methods produce different estimates. We apply time‐ and frequency‐domain methods to estimate stress drops for real earthquakes in the SCARDEC (Seismic source ChAracteristics Retrieved from DEConvolving teleseismic body waves, Vallée and Douet, 2016 ) source time function (STF) database and analyze how rupture complexity drives stress‐drop estimate discrepancies. Specifically, we identify two complexity metrics—Brune relative energy (BRE) and spectral decay—that parameterize an earthquake’s complexity relative to the standard Brune model and strongly correlate with the estimate discrepancies. We find that the observed systematic magnitude–stress‐drop trends may reflect underlying changes in STF complexity, not necessarily trends in actual stress drop. Both the decay and BRE parameters vary systematically with magnitude, but whether this magnitude–complexity relationship is real remains unresolved.

Bulletin of the Seismological Society of America↗
USGS2024

Trimming the UCERF3-TD logic tree: Model order reduction for an earthquake rupture forecast considering loss exceedance

The Uniform California Earthquake Rupture Forecast version 3-Time Dependent depicts California’s seismic faults and their activity. Its logic tree has 5760 leaves. Considering 30 more model combinations related to ground motion produces 172,800 distinct models representing so-called epistemic uncertainties. To calculate risk to a portfolio of buildings, one also considers millions of earthquakes and spatially correlated ground-motion variability. We offer a tree-trimming technique that retains the probability distribution of portfolio loss and identifies the leading sources of uncertainty for further study. We applied it to a California statewide building portfolio and various levels of nonexceedance probability between one in 100 and one in 2500. We trimmed the logic tree from 172,800 leaves to as few as 15. The result: a supercomputer that would otherwise run 24 h to estimate the distribution of one-in-250-year loss can calculate it in moments with the reduced-order model. Others can use the reduced-order model to calculate risk to different California portfolios, and scientists can prioritize study to reduce the remaining epistemic uncertainty.

Earthquake Spectra↗
USGS2026

A case study of maximum depositional ages from terrestrial sandstones near the Cretaceous—Paleogene transition, western Williston Basin, USA

We present a new Bayesian method for deriving maximum depositional ages from detrital K-feldspar using total-fusion 40 Ar/ 39 Ar data. Individual analyses weighted by K/Ca ratio, age uncertainty, and percent radiogenic argon prioritize a result to come from accurately measured volcanic sources. Results from this method applied to sandstones from the Hell Creek region of northeastern Montana show that detrital K-feldspar maximum depositional ages align closely with detrital U-Pb zircon ages as well as tephra based chronostratigraphic constraints from both 40 Ar/ 39 Ar and U-Pb data. An age model informed by maximum depositional ages and available tephra data provides an estimate of 1.74 ± 1.04 Ma for the duration of deposition for the Hell Creek Formation. Combined age model and maximum depositional age data suggest ≤ 1.84 Ma of missing time is represented by the Hell Creek and Fox Hills formational disconformity, coinciding with the final regression of the Western Interior seaway.

Montana↗
USGS2024

Self-guided decision support groundwater modelling with Python

The GMDSI tutorial notebooks repository provides learners with a comprehensive set of tutorials for self-guided training on decision-support groundwater modelling using Python-based tools. Although targeted at groundwater modelling, they are based around model-agnostic tools and readily transferable to other environmental modelling workflows. The tutorials are divided into three parts. The first covers fundamental theoretical concepts. These are intended as background reading for reference on an as-needed basis. Tutorials in the second part introduce learners to some of the core concepts parameter estimation in a groundwater modelling context, as well as providing a gentle introduction to the PEST, PEST++ and pyEMU software. Lastly, the third part demonstrates how to implement highly-parameterized applied decision-support modelling workflows. The tutorials aim to provide examples of both “how to use” the software as well as “how to think” about using the software. A key advantage to using notebooks in this context is that the workflows described run the same code as practitioners would run on a large-scale real- world application. Using a small synthetic model facilitates rapid progression through the workflow.

Journal of Open Source Education↗
USGS2024

(Re)discovering the seismicity of Antarctica: A new seismic catalog for the southernmost continent

We apply a machine learning (ML) earthquake detection technique on over 21 yr of seismic data from on‐continent temporary and long‐term networks to obtain the most complete catalog of seismicity in Antarctica to date. The new catalog contains 60,006 seismic events within the Antarctic continent for 1 January 2000–1 January 2021, with estimated moment magnitudes (⁠Mw ⁠) between −1.0 and 4.5. Most detected seismicity occurs near Ross Island, large ice shelves, ice streams, ice‐covered volcanoes, or in distinct and isolated areas within the continental interior. The event locations and waveform characteristics indicate volcanic, tectonic, and cryospheric sources. The catalog shows that Antarctica is more seismically active than prior catalogs would indicate, examples include new tectonic events in East Antarctica, seismic events near and around the vicinity of David Glacier, and many thousands of events in the Mount Erebus region. This catalog provides a resource for more specific studies using other detection and analysis methods such as template matching or transfer learning to further discriminate source types and investigate diverse seismogenic processes across the continent.

Seismological Research Letters↗
USGS2026

The use of fluorite geochemistry and machine learning to identify critical mineral systems

Fluorite (CaF 2 ) is a potential pathfinder to critical mineral and rare earth element (REE) deposits but its application has been limited to a narrow range of mineralization types. I show that fluorite is a robust recorder of mineralization fertility by applying statistical and machine-learning methods to a new global fluorite geochemical database. Distinct median rare earth and trace element patterns are observed among deposit types and genetic environments. Fluorite associated with carbonatites and REE deposits are relatively enriched in Sr and have minimal Eu anomalies. These characteristics define new bivariate discrimination diagrams that correctly identify 78% of carbonatite-related fluorite and 88% of fluorite from REE deposits. Random forest classifiers were developed for a wide range of mineralization types and genetic settings. Trained solely on rare earth element patterns, these models achieve accuracies of 77–79%. Higher classification accuracies (up to 88–96%) are obtained when including elements such as Sr, highlighting the significance of trace elements for optimal fluorite classification. The recognition of diagnostic fluorite compositional fingerprints, particularly in REE-fertile systems, underscores its potential as a pathfinder and indicator for critical mineral exploration in F-bearing environments.

Mineralium Deposita↗