Water in carbonate rocks of the Madison Group in southeastern Montana: A preliminary evaluation

W. Roger Miller

doi:10.3133/wsp2043

Home/Archive/USGS

USGS · wsp2043

Water in carbonate rocks of the Madison Group in southeastern Montana: A preliminary evaluation

W. Roger Miller

View original source ↗Read source document ↗Export metadata ↓

Abstract

The Madison Group of Mississippian age comprises, from oldest to youngest, the Lodgepole and Mission Canyon Limestones and the Charles Formation. The Madison crops out in the Bighorn and Pryor Mountains and in the mountains west of the study area. These rocks consist of cyclically deposited normal-marine carbonates and restricted-marine carbonates and evaporites. The Madison ranges in thickness from about 700 feet (210 metres) in the Bighorn Mountains to about 2,000 feet (610 metres) in the Williston basin. The top of the Madison ranges in depth from land surface in the mountains to about 10,000 feet (3,000 metres) below land surface along the MontanaWyoming border. The potentiometric surface of water in the Madison Group slopes northeastward from the outcrops. Potentiometric lows occur in the Cat Creek anticline-Porcupine dome area along the Bighorn River and at the north end of Powder River basin. Potentiometric highs occur in outcrop areas, on the interstream divide between the Bighorn, Tongue, and Yellowstone Rivers, and along the Cedar Creek anticline. The potentiometric surface ranges from 1,200 feet (370 metres) below land surface in the topographically high areas in the southern part of the area to 1,000 feet (300 metres) above land surface along the Yellowstone River. Yields from wells range from about 50 gallons per minute (3 litres per second) at several places to a reported 1,400 gallons per minute (88 litres per second) from a flowing well on the north side of the Porcupine dome. Yields estimated or reported from drill-stem tests range from about 1 to 157 gallons per minute {0.1 to 9.9 litres per second). Water from the Madison generally contains less than 3,000 milligrams per litre dissolved solids south of T. 1 N., and from 3,000 to 10,000 milligrams per litre in most of the remaining area; in the Williston basin the concentration increases to more than 100,000 milligrams per litre. In the southeastern and southwestern parts of the area, calcium, magnesium, and sulfate ions constitute more than 75 percent of the dissolved constituents, in milliequivalents per litre. North of about T. 8 N., sodium, potassium, and chloride ions constitute more than 50 percent of the dissolved constituents; in the Williston basin, sodium, potassium, and chloride ions constitute more than 75 percent of the total.

Explore related subjects

Water Supply Paper Report

Source-reported bounding extent: 45° to 47.517° latitude; -108.5° to -104.054° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

W. Roger Miller. 1976. Water in carbonate rocks of the Madison Group in southeastern Montana: A preliminary evaluation. https://doi.org/10.3133/wsp2043

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2004

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper↗

USGS2002

Use of stable isotopes of carbon, nitrogen, and sulfur to identify sources of nitrogen in surface waters in the lower Susquehanna River basin, Pennsylvania

With the exception of sewage and septic effluents, most nitrogen sources and soils contain larger proportions of organic and reduced forms of carbon, nitrogen, and sulfur than inorganic, oxidized forms. In contrast, most surface water and ground water contains larger proportions of dissolved inorganic carbon, nitrogen, and sulfur forms than organic forms. Data indicate that carbon, nitrogen, and sulfur are extensively processed in soils and streams.

Water Supply Paper↗

USGS2001

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper↗