Geology ReportsSearch

USGS · wsp1463

Records of springs in the Snake River valley, Jerome and Gooding Counties, Idaho, 1899-1947

Abstract

Many springs and seeps discharge water from the north wall of the valley of the Snake River between Milner and Bliss, Idaho. These are fed by a large ground-water body lying east and north of the river, beneath the Snake River Plain. Much ground water is pumped on the plain, many irrigation wells having been drilled since 1946. Heavy withdrawal of ground water from wells may alter the discharge rates and regimens of the springs and may affect downstream flow of the river. For that reason, the historic record of discharge from the springs is an important part of the basis on which hydrologic changes can be determined. The records also would facilitate appraisal of the total groundwater resources of the Snake River Plain. This report brings together in a single volume all obtainable records for the period 1899-1947. The report also includes descriptive data and a brief history of work done. The springs occur in a 40-mile reach of the valley of the Snake River between Milner Dam and Bliss. Most are on the north side of the river but a few are on the south. The earliest measurements of record were made by F. S. Shirley and N. S. Dils, of the U. S. Geological Survey, in 1899. The next were by J. D. Stannard for the Idaho State Engineer and by Dils in 1902. Few measurements were made from 1903 to 1916. Somewhat more systematic measurements were made by the Geological Survey and by local agencies in 1917-20, 1923-25, and 1931, and at several intervals thereafter. In 1950 the Geological Survey began continuous, systematic measurements by installing and operating gaging stations on four representative springs and by making yearly direct measurements of all large springs. The recent records are not included in this report; they have been published yearly in a series of reports on stream discharge. The report includes lists of all published sources from which data were compiled, and cites many unpublished sources. The principal workers and agencies that have obtained records are listed also. The quality and accuracy of the compiled records, as might be expected, are not uniform, as the records were collected under varying circumstances, by many individuals, and according to changing or differing standards. The continuity is generally poor. Nevertheless, the compilation represents the base from which further work must start and is an extremely valuable record. It represents about 30 large springs and groups of springs, having discharge rates ranging from a fraction of a cubic foot per second to well over 1,000 cfs. Many smaller springs and seeps never have been measured. The fluctuation indexes for individual springs or groups range from 2 to 41 percent. The fluctuation index is the mean deviation of the discharge rate from the arithmetic mean, expressed as a percentage of the arithmetic mean. Although to some extent the indexes are a measure of the consistency of the record, they also seem to reflect actual differences in range of discharge, and they indicate that springs upstream in the Snake River valley fluctuate through a wider range than do those downstream. The fluctuations are rather slow, which reflects the equalizing influence of the large ground-water reservoir that supplies the springs.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 42.4997° to 43.1984° latitude; -115.1281° to -113.8855° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Raymond L. Nace, Arthur Van’t Hul, I.S. McQueen. 1958. Records of springs in the Snake River valley, Jerome and Gooding Counties, Idaho, 1899-1947. https://doi.org/10.3133/wsp1463

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper

Sediment-quality assessment of Franklin D. Roosevelt Lake and the upstream reach of the Columbia River, Washington, 1992

Elevated concentrations of trace elements were found in bed sediment of Lake Roosevelt and the Columbia River, its principal source of inflow. Trace-element concentrations in whole water samples did not exceed criteria for freshwater organisms. Bed sediments of Lake Roosevelt were analyzed for organic compounds associated with wood-pulp waste. Dioxins and furans were found in suspended sediment and water of the Columbia River. Abundance and diversity of benthic invertebrate communities were analyzed.

Water Supply Paper