Geology ReportsSearch

USGS · wsp1299

The industrial utility of public water supplies in the United States, 1952, part 1, States east of the Mississippi River

Abstract

Public water supplies are utilized extensively by industries for processing, cooling, and steam generation. The requirements as to quality of water for each industry are specific, therefore information on the quality or chemical character of the water supply is essential not only in the location of industrial plants but also is an aid in the manufacture and distribution of products. Data are given in this report on the water supplies for 1,315 of the larger cities (or places) throughout the United States. The population of these cities represents 58. 3 percent of the total population (1950 census), and more than 90 percent of the total urban population, of the United States. Part 1 of the report contains data for 819 cities east of the Mississippi River, and part 2 includes data for 416 cities west of the river. All cities of 15,000 or more population and many cities of smaller population are included. The information given for each place includes, in most instances, population of the place; ownership, source, and treatment of supply; storage facilities for both raw and finished water; and chemical analyses of the supplies. The chemical quality of a water affects its industrial utility. A total of 2, 506 chemical analyses of the supplies for the places included are shown. Surface-water supplies, generally, are more variable in composition than ground-water supplies, but contain less mineral matter in solution. Many of the treated public supplies require further treatment to make them satisfactory for some industrial uses. Of the total of 1,315 places included in the report, 711 receive surface-water supplies; 472 receive ground-water supplies, and 132 receive mixed supplies. The population served by these supplies is about 88,000,000, of which about 71,000,000 receive surface-water supplies and 17,000,000 groundwater supplies. Hardness of water supplies with respect to industrial use is given much attention. The hardness of the large public supplies ranges from less than 5 parts per million to about 700 parts. About 52, 000, 000 people are furnished with water having hardness of 100 parts per million or less. The weighted average hardness (average hardness of supplies weighted according to the population served) of finished water of surface supplies is 82 parts per million; of ground supplies, 162 parts; and of all supplies, 97 parts. The weighted average hardness of raw water of surface, ground, and all supplies are 96,200, and 116 parts per million, respectively. The average hardness (based on the average hardness of each supply and the number of supplies) of finished water of surface supplies is 85 parts per million; of ground supplies, 164 parts; and of all supplies, 121 parts. The average hardness of the raw water supplies are 94, 192 and 139 parts per million, respectively. The median hardness of finished water of all supplies is 91 parts per million, and of the raw water supplies, 90 parts. The treatment of a public water supply is planned principally to give a water that is bacterially safe for public use, and to eliminate or minimize certain undesirable characteristics of the water; Of the supplies for the places in this report, a total of 117 (3 surface supplies and 114 ground supplies) receive no treatment; 393 supplies receive no treatment other than chlorination; and the remainder receive treatment in addition to chlorination. The supplies for 171 cities are softened. Rapid sand filter plants are in use for 533 cities, exclusive of those in use at places where the water is softened. Slow sand-filter plants are in use at 35 places. A population of about 40, 000, 000 is served with water from these filter plants. The total number of treatment plants, exclusive of facilities for chlorination, for most of the places in this report is 660. The total capacity of these plants in millions of gallons per day is 10, 694. A total of 693 places report raw-water storage facilities having a total capacity of 2, 460, 346 millions of gallons; a total of 1,081 places report finished-water storage facilities having a total capacity of 24, 557 millions of gallons. Investigations by others have shown that a definite relationship exists between fluoride in drinking water and the incidence of dental caries in the teeth of children. A total of about 85 percent of the population served from the large public supplies receive water having a fluoride concentration in the range of 0.0 to 0. 5 part per million. Few large public supplies contain fluoride in concentrations in excess of 3 parts per million. A total of 155 places of those included in the report received fluoridated water in 1955.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

E. W. Lohr, S. K. Love. 1954. The industrial utility of public water supplies in the United States, 1952, part 1, States east of the Mississippi River. https://doi.org/10.3133/wsp1299

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper

Sediment-quality assessment of Franklin D. Roosevelt Lake and the upstream reach of the Columbia River, Washington, 1992

Elevated concentrations of trace elements were found in bed sediment of Lake Roosevelt and the Columbia River, its principal source of inflow. Trace-element concentrations in whole water samples did not exceed criteria for freshwater organisms. Bed sediments of Lake Roosevelt were analyzed for organic compounds associated with wood-pulp waste. Dioxins and furans were found in suspended sediment and water of the Columbia River. Abundance and diversity of benthic invertebrate communities were analyzed.

Water Supply Paper