Geology Reports⌕ Search

USGS · sir20105130

Pesticides in groundwater in the Anacostia River and Rock Creek watersheds in Washington, D.C., 2005 and 2008

Abstract

The U.S. Geological Survey (USGS), in cooperation with the District Department of the Environment, conducted a groundwater-quality investigation to (a) determine the presence, concentrations, and distribution of selected pesticides in groundwater, and (b) assess the presence of pesticides in groundwater in relation to selected landscape, hydrogeologic, and groundwater-quality characteristics in the shallow groundwater underlying the Anacostia River and Rock Creek watersheds in Washington, D.C. With one exception, well depths were 100 feet or less below land surface. The USGS obtained or compiled ancillary data and information on land use (2001), subsurface sediments, and groundwater samples from 17 wells in the lower Anacostia River watershed from September through December 2005, and from 14 wells in the lower Anacostia River and lower Rock Creek watersheds from August through September 2008. Twenty-seven pesticide compounds, reflecting at least 19 different types of pesticides, were detected in the groundwater samples obtained in 2005 and 2008. No fungicides were detected. In relation to the pesticides detected, degradate compounds were as or more likely to be detected than applied (parent) compounds. The detected pesticides chiefly reflected herbicides commonly used in urban settings for non-specific weed control or insecticides used for nonspecific haustellate insects (insects with specialized mouthparts for sucking liquid) or termite-specific control. Detected pesticides included a combination of pesticides currently (2008) in use, banned or under highly restricted use, and some that had replaced the banned or restricted-use pesticides. The presence of banned and restricted-use pesticides illustrates their continued persistence and resistance to complete degradation in the environment. The presence of the replacement pesticides indicates the susceptibility of the surficial aquifer to contamination irrespective of the changes in the pesticides used. A preliminary review of the data collected in 2005 and 2008 indicated that differences in the surficial geology, land use (as a surrogate for pesticide use), and above-average precipitation for most of 2004 through 2008, as well as differences in the number and performance of USGS laboratory methods used, could have led to more pesticides detected in groundwater samples collected in 2008 than in groundwater samples collected in 2005. Thus, although data from both years of collection were used for interpretive analysis, emphasis was placed on the analysis of the data obtained in 2008. The presence of pesticides in shallow groundwater (less than approximately 100 ft (feet), or 30 m (meters), below land surface) indicated at least the upper surficial aquifer in Washington, D.C. was susceptible to contamination. One or more herbicides or insecticides were detected in groundwater samples collected from 50 percent of the shallow wells sampled in 2005, and from 62 percent of the shallow wells sampled in 2008. Differences among types of pesticides in shallow groundwater were apparent. The most frequently detected class of herbicides was the s-triazine compounds—atrazine, simazine, or prometon, or the atrazine-degradate compounds—2-chloro-4-ethylamino-6-amino-s-triazine (desethylatrazine or CIAT) and 2-chloro-4-isopropylamino-6-amino-s-triazine (hydroxyatrazine or OIET). The next most frequently detected classes of herbicides were the chloroacetanilides, including metolachlor and acetochlor, and the ureic herbicides, including diuron (and degradate, 3,4-dichloroaniline), fluometuron, metsulfuron methyl, sulfameturon, bromacil, and tebuthiuron. Insecticides also were detected, but less frequently than herbicides, with one or more insecticides present in groundwater samples from 38 percent of shallow wells sampled in 2008. Detected insecticides included parent or degradate compounds commonly used for either nonspecific or haustellate (sucking) insects, including chlorpyrifos and dichlorodiphenyldichloroethane (p,p’-DDD; a degradate of dichlorodiphenyltrichloroethane, DDT), and for termite control, including dieldrin, chlordane, heptachlor epoxide, (a degradate of heptachlor), fipronil, and the sulfone and sulfide degradates of fipronil. The concentrations of individual pesticides in shallow groundwater in both years were low. Maximum concentrations were no greater than a few tenths of a microgram per liter (μg/L); typical concentrations often were less than 0.1 μg/L. Multiple pesticides, however, commonly were present in groundwater. For example, in 2008, approximately 88 percent (7 of 8) of the wells that yielded a sample with at least one detectable pesticide contained five or more pesticides. The highest number of detections occurred in a groundwater sample from well WE Ca 32, which is located in a highly developed urban area; this sample contained 15 different pesticide residues. In relation to human and aquatic health, no pesticide concentration in either 2005 or 2008 exceeded Federal drinking-water standards. Groundwater samples from a few sites, however, contained levels of chiefly banned or restricted-use pesticides that exceeded other human-health and (or) aquatic-health guidelines. For example, concentrations of dieldrin in 2008 groundwater samples from three wells—WE Ca 32 (0.028 μg/L), WE Ba 11 (0.016 μg/L), and WW Ac 8 (0.014 μg/L)—fell within the range of concern for 2004 Federally approved non-regulatory USGS Health-Based Assessment benchmarks (0.002 to 0.2 μg/L), and exceeded earlier (1999) Federal criteria for drinking water (0.000052 μg/L). Other individual compounds whose concentrations exceeded 1999 Federal guidelines for samples from one or more of these three sites, or another site, included p,p’-DDD, dichlorodiphenyldichloroethylene (p,p’-DDE; another degradate of DDT), chlordane, and heptachlor epoxide. Pesticide concentrations in groundwater also were compared to three aquatic-health guidelines for freshwater (United States, Great Lakes, or Canada). One or more of these guidelines were exceeded in groundwater samples obtained in 2005 or 2008 for one or more of the compounds chlordane, dieldrin, heptachlor epoxide, p,p’-DDE, p,p’-DDD, and chlorpyrifos. The spatial distribution of pesticides in the shallow groundwater appeared to be related, in part, to land use, a surrogate for pesticide use. Although most of the wells sampled in this study are in parklands or other relatively open and accessible space, multiple pesticides most often were detected in 2008 groundwater samples collected from wells where a considerable percentage (in excess of 60 percent) of the land within a 500-m radius is developed space (residential, commercial, or other urban infrastructure). Insecticides were detected in wells surrounded by at least 50 percent, and most commonly by more than 80 percent, development. Well WE Ca 32, the site associated with the highest number of pesticide residues in groundwater (8 herbicides and 7 insecticides), is in a small residential park, where 99 percent of the surrounding land is well-maintained residential and commercial development. The vertical distribution of detected pesticides in shallow groundwater appeared to be related, in part, to depth below land surface, surficial-bedrock type, and differences in the chemistry of shallow groundwater. Pesticides were detected at relatively shallow depths in wells that may not have fully penetrated the shallow aquifer. For wells in which at least one pesticide was detected, the median depth below land surface to the top of the well screen was 5.8 m, and the maximum depth was 8.5 m. Among the types of surficial materials in which wells were completed—alluvium, terrace deposits, or Potomac Formation sub- or outcrops in the Coastal Plain Province, and saprolite or fractured bedrock (Laurel and Sykesville Formations) underlying saprolite in the Piedmont Province—no pesticides were detected in groundwater associated with wells completed in the alluvium or fractured bedrock. Detections occurred in some but not all wells completed in the other surficial materials. Overall, the pattern in occurrence appeared related to the local permeability of these sediments and groundwater chemistry. Groundwater with multiple pesticide detections tended to occur in permeable sediments (absent any appreciable overlying clay, silt, or clay-silt layers), in conjunction with other common urban contaminants (elevated chloride in excess of tens to hundreds of milligrams per liter (mg/L), and oxic, rather than reduced, groundwater as evidenced by elevated (in excess of 5 mg/L) concentrations of nitrate). The results of this investigation were compared to results from two other similar and recent studies on pesticide occurrence in the shallow aquifer. These included a study in the nearby Maryland and Delaware Coastal Plain Physiographic Province and one in the Maryland and Virginia Piedmont Physiographic Province. Results from these studies were similar to the current study in relation to (a) the types, frequencies, concentrations, and mixtures of pesticides detected; (b) compounds that exceeded human-and aquatic-health criteria; and (c) the occurrence and distribution of pesticides within the surficial aquifer in relation to depths, sediment types, and groundwater chemistries.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 38.833333333333336° to 39° latitude; -77.11666666666666° to -76.9° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Michael T. Koterba, Cheryl A. Dieter, Cherie V. Miller. 2010. Pesticides in groundwater in the Anacostia River and Rock Creek watersheds in Washington, D.C., 2005 and 2008. https://doi.org/10.3133/sir20105130

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Baseline water-quality inventory and summary for the Paterson Great Falls National Historical Park, New Jersey

The Paterson Great Falls National Historical Park (PAGR), established in 2011 in the City of Paterson, New Jersey, contains many cultural, historical, and natural resources. Because of the PAGR’s young age and limited resources, a long record of natural resource data is not available for use to guide future park management and planning decisions. A detailed natural resource inventory was identified as an immediate need in the “Foundation Document—Paterson Great Falls National Historical Park,” given the history of extensive industrial activity throughout the PAGR and the Passaic River Basin. The U.S. Geological Survey, in cooperation with the National Park Service and the Urban Waters Federal Partnership for the Lower Passaic River, inventoried water-quality monitoring efforts and compiled historical water-quality data from secondary data sources to define baseline conditions in the PAGR and the surrounding study area. This report documents the methods used to harmonize water-quality data aggregated from multiple sources for the PAGR study area. Procedures implemented during data harmonization include compiling data from multiple sources, assessing the dataset for completeness, addressing metadata concerns, and creating a consistent and quality-assured dataset for future analysis. The harmonized dataset contains 14 aggregated surface-water sites, 1,103 individual sampling days, and 32,000 water-quality records throughout the period of record defined for this study (1952–2021). Summary statistics and comparison to water-quality criteria are provided for focus parameters that can support PAGR management, including field properties, suspended material, total dissolved solids, specific conductance, chloride, sulfate, Escherichia coli, nutrients, contaminants of concern related to fish consumption advisories, and litter and floatable debris. A spatial data gap was identified for the recreational area near the base of the Great Falls and immediately downstream from a known combined sewer overflow discharge location. Analytic data gaps were identified for continuous streamflow and water-quality parameters, floatable debris characterization, and harmful algal blooms identification. Continuous collection of contaminants of concern was identified as a temporal data gap, as these parameters were not consistently collected within the study area. The water-quality data synthesis and summary presented in this report can assist PAGR staff in understanding the complex baseline water resources within the study area and can serve as a baseline to design future water-quality monitoring efforts and evaluate changes in water quality over time. The harmonized dataset, as well as future New Jersey Department of Environmental Protection and New Jersey Harbor Discharge Group monitoring data and assessments, can also be used to examine the status and trends in surface-water quality, support compliance with the Clean Water Act (33 U.S.C. 1251 et seq.), and further investigate changes to park water resources that can affect ecological and human health.

New Jersey↗

Slip tendency and dilation tendency of Quaternary faults in the Great Basin region, Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming

This report presents the results of slip tendency and dilation tendency analysis of Quaternary faults in the Great Basin region, in the states of Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming. This effort was undertaken as part of two studies: the U.S. Department of Energy Geothermal Technologies Office-funded Innovative Geothermal Exploration through Novel Investigations of Undiscovered Systems (INGENIOUS) project, which is a multidisciplinary, multi-institution effort to develop new methodologies and best practices to accelerate the discovery of new, commercially viable hydrothermal resources; and the U.S. Geological Survey Geothermal Resources Investigations Project. The goal of this work is to identify faults and fault segments that are appropriately oriented to be stress-loaded for slip or to dilate under the ambient stress conditions. Both conditions may make such faults more likely to host permeability and fluid flow relative to other faults in the region. Slip tendency and dilation tendency were calculated for all fault segments in the study area from the U.S. Geological Survey Quaternary Fault and Fold Database. Results demonstrate that faults with high slip tendency and dilation tendency are common in the Great Basin region. The areas containing many high slip tendency and dilation tendency fault segments are associated with high strain rates. These areas also host a relatively high proportion of the known hydrothermal systems. This indicates that faults with high slip tendency and dilation tendency in areas with high strain-rate are potentially most prospective for hosting hydrothermal systems. The database published in coordination with this report contains the slip tendency and dilation tendency results data, including the fault geometry and stress data used to calculate these quantities, for both the Great Basin study area and the smaller INGENIOUS study area.

Arizona, California, Idaho, Nevada, Oregon, Utah, ↗

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York, and coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York, and nearby coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater emergence flooding. Groundwater emergence fooding refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As a part of a comprehensive study of compound flood hazards in the coastal areas of Long Island and Long Island Sound, a spatial analysis was completed by the U.S. Geological Survey, in cooperation with the Environmental Protection Agency’s Long Island Sound Partnership, formerly called the Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 grid cells that were 900 meters by 900 meters (approximately 3,000 feet by 3,000 feet), for the purpose of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard score was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percentage of area within each cell with slow infiltrating soils. A scenario with a higher sea-level position was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard score was reviewed in conjunction with the National Land Cover Database to identify developed areas and associated infrastructure that may be at risk of potential groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface waterbodies are not likely to be exposed to groundwater emergence flooding. For Long Island, in the scenario with higher sea-level position, a greater groundwater emergence flood hazard is calculated for some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea-level condition and the higher sea-level position scenario.

Connecticut, New York, Rhode Island↗