Simulation of proposed increases in ground-water withdrawals on the Atlantic City 800-foot sand, New Jersey Coastal Plain

Daryll A. Pope

doi:10.3133/sir20065114

Home/Archive/USGS

USGS · sir20065114

Simulation of proposed increases in ground-water withdrawals on the Atlantic City 800-foot sand, New Jersey Coastal Plain

Daryll A. Pope

View original source ↗Export metadata ↓

Abstract

The confined Atlantic City 800-foot sand and the unconfined Kirkwood-Cohansey aquifer system (surficial aquifer) are major sources of water for southeastern New Jersey. Because of recent concerns about streamflow depletion resulting from ground-water withdrawals and the potential ecological effects on stream habitat in the area, the focus on future withdrawals has been shifted away from the surficial aquifer to the confined Atlantic City 800-foot sand until the effects of increased withdrawals from the surficial aquifer can be investigated. A study was conducted to evaluate the effects of seven proposed increases in ground-water withdrawals from the Atlantic City 800-foot sand and the Kirkwood-Cohansey aquifer system on the Atlantic City 800-foot sand. The proposed withdrawals are increases above the 2004 allocated rates (full allocation). The effects of full-allocation ground-water withdrawals and the cumulative effect of withdrawals for each of seven proposed increases in withdrawals were simulated using three previously published ground-water flow models: the New Jersey Coastal Plain Regional Aquifer System Analysis model, the Coastal Plain Optimization model, and a model of the Atlantic City 800-foot sand in Atlantic County, New Jersey. These models were used to simulate changes in water levels, the source supplying the increased ground-water flow, and the effects on saltwater movement towards production wells in Cape May County as a result of the proposed increased withdrawals at proposed or existing wells. The results of the simulations represent the effects of the proposed increase from full-allocation withdrawals to an additional 1,825 Mgal/yr (million gallons per year) from the Atlantic City 800-foot sand and an additional 1,045 Mgal/yr from the deep part of the Kirkwood-Cohansey aquifer system near the updip limit of the Atlantic City 800-foot sand. Most of the simulated decline in water levels in Atlantic County occurred as the result of the proposed increased withdrawals simulated for the New Jersey American Water Company wells. Simulated declines in water levels in Cape May were caused mainly by the simulated increased withdrawals for the Cape May City Desalination Plant wells. The additional water to supply the proposed increases in the scenarios was primarily horizontal flow from the unconfined updip part of the Kirkwood-Cohansey aquifer system, which accounted for 63 percent of the inflow, and flow from the overlying Kirkwood-Cohansey aquifer system into the Atlantic City 800-foot sand, which supplied 27 percent of the additional water. Because the withdrawals were made from the confined aquifer and the deeper part of the unconfined aquifer, the effect on streamflow was substantially less than would have occurred had the withdrawals been made directly from the shallower parts of the unconfined aquifer. The travel times from the 250-mg/L isochlor to production wells in Stone Harbor were longer as a result of all the additional withdrawals. For some scenarios, withdrawals in Atlantic County caused the saltwater to move slightly faster towards the production wells. These effects were offset by the increase in travel time caused by the potential increased withdrawals simulated for the Cape May City desalination wells, which either diverted water towards the desalination wells or increased the travel time towards production wells.

Explore related subjects

Scientific Investigations Report Report

Source-reported bounding extent: 38.893325795375034° to 39.811384165634934° latitude; -74.97379758829241° to -74.19635824404139° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Daryll A. Pope. 2006. Simulation of proposed increases in ground-water withdrawals on the Atlantic City 800-foot sand, New Jersey Coastal Plain. https://doi.org/10.3133/sir20065114

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Analysis of groundwater geochemistry in the Lansing, Michigan, area

Groundwater resources in the Lansing, Michigan, area are protected by a wellhead protection plan, but previous studies have indicated that groundwater in this area may be susceptible to surface contamination. The U.S. Geological Survey, in cooperation with the Lansing Board of Water & Light, analyzed geochemical and aquifer characteristics to assess the potential for contamination of groundwater resources. Recharge age categories were determined from tritium concentrations for some wells, and by using ternary diagrams and principal component analysis for other wells. These age classifications, combined with hydrogeologic and geochemical data, were analyzed by using statistical methods to identify trends that may indicate areas of increased groundwater susceptibility. Wells with modern recharge tended to have higher sodium, chloride, and chloride:bromide ratios than did wells with mixed recharge, suggesting greater surface connectivity and potential influence from anthropogenic sources such as road salt. In contrast, wells in the mixed age category exhibited more stable geochemistry and lower constituent concentrations. Classification and regression tree models identified aquifer geometry—particularly the thickness of the uppermost bedrock unit and presence of confining layers—as key predictors of recharge age and geochemical indicators. The trends identified from these analyses could help to reveal locations in the Lansing area that are among the most susceptible to contamination.

Scientific Investigations Report↗

USGS2026

Evaluating the number of realizations (train-test splits) necessary to ensure robust estimates of conventional hydrothermal resource favorability using Monte Carlo cross-validation, the Great Basin, Western USA

Supervised machine learning approaches used to produce favorability maps in resource assessments commonly partition an input dataset into training and testing subsets (that is, through train-test splits). However, if a single split is not representative of underlying resource conditions, the resulting favorability map may be biased, particularly with sparse or heterogeneous datasets. To mitigate the potential for unrepresentative favorability maps, recent works by U.S. Geological Survey researchers have used Monte Carlo cross-validation to implement a large number ( n) of randomized train-test splits to produce n realizations. The realizations are then aggregated using cell-wise median predictions to produce the resulting final favorability map, recognizing that the median will remove extreme values that might have been estimated from a comparatively few unrepresentative realizations. Theoretically, the median prediction at every cell converges to a single estimate as n approaches infinity, and the question addressed herein is: How many realizations are necessary to get a robust estimate (that is, an estimate unaffected by additional realizations)? Therefore, convergence metrics are described to identify the number of train-test splits and realizations needed to make a reliable map using the data and supervised machine learning workflow for conventional hydrothermal resource assessment of the Great Basin of the Western United States. For this study, robust prediction occurs with n approximately equal to 600 realizations, and smaller ensembles (for example, n is approximately equal to 200 or even 100) may be suitable during preliminary or exploratory analyses. Although the resulting threshold numbers will vary depending on the data and modeling approach used, the convergence metrics proposed and applied herein are applicable to other supervised machine learning studies that use Monte Carlo cross-validation.

California, Idaho, Nevada, Oregon, Utah↗

USGS2026

Groundwater budget for the Portneuf River Basin, southeastern Idaho

The U.S. Geological Survey, in cooperation with the Idaho Department of Water Resources, developed the first groundwater budget for the upper Portneuf River Basin in southeastern Idaho, a tributary of the Snake River. A groundwater budget for the Portneuf River Basin supports water resource and administrative management decisions within the basin and for downstream users of the eastern Snake River Plain aquifer. The analysis quantifies inflows, outflows, and residuals for an aquifer system defined by the Idaho Department of Water Resources under three recent precipitation conditions: an average year (2016), a dry year (2021), and a wet year (2023). The budget was calculated for the basin and for two subbasins delineated by the U.S. Geological Survey streamgage Portneuf River at Topaz, Idaho (13073000): the above Topaz subbasin, which includes the Portneuf-Gem valley, and the below Topaz subbasin, which includes Marsh Valley. Aquifer inflows include mountain-front recharge; areal recharge; recharge from applied water, including recharge from irrigation, canal seepage, and effluent returns; groundwater flow into the basin; and reservoir seepage. Outflows include groundwater pumping for agricultural, municipal, and domestic uses; subsurface outflow through the Portneuf gap; and discharge to streams as base flow. Estimated annual inflows for the full basin ranged from 116,880 acre-feet in 2021 to 154,880 acre-feet in 2023, and outflows ranged from 132,190 acre-feet in 2016 to 158,490 acre-feet in 2023. Basinwide residuals, the change in storage plus uncertainty, were −2,410 acre-feet in 2016, −18,410 acre-feet in 2021, and −3,610 acre-feet in 2023, and each subbasin had a mixture of negative and positive residuals. These basinwide results, interpreted as change in storage plus water-budget uncertainty, indicate minor net losses that increase with dry conditions, consistent with well depth-to-water measurements indicating gradual multi-decadal declines. Patterns in subbasin residuals are driven by irrigation practices and surface-water management; for example, the above Topaz subbasin relies more on groundwater for irrigation, resulting in more negative residuals during dry years. In contrast, the below Topaz subbasin depends more on surface water, producing positive residuals during dry years because of irrigation losses and canal seepage. The analyses for both subbasins indicate decades-long groundwater declines, which agree with the overall negative residuals calculated. The largest sources of uncertainty include climate inputs (precipitation and evapotranspiration) and poorly constrained components such as groundwater inflow and tributary stream infiltration. These findings provide insight into how climatic variables and irrigation practices affect groundwater inflows and outflows within the Portneuf River Basin.

Idaho↗