Geology Reports⌕ Search

USGS · sir20045148

Water-use trends in the desert southwest: 1950-2000

Abstract

The population of the Desert Southwest is among the fastest growing in the country. In this area, ground-water supplies have been developed, surface-water resources have been fully appropriated, and conservation and conjunctive water-use measures are being used to meet water-resource needs. Complex networks of water-distribution systems have been developed to deliver surface-water supplies, and interstate agreements, such as the Colorado River Compact of 1922, help manage the distribution of water among many States in the Western United States, including Arizona, California, Nevada, New Mexico, and Utah. The Colorado River, which lies on the borders of Arizona, California, and Nevada, plays an important role in supplying water to the Southwest. Water from the Colorado River is used to irrigate extensive farmland in the southern California deserts and is delivered to southern and central Arizona through the Central Arizona Project canal for domestic and agricultural uses. It is also the source of much of the water used for domestic purposes in southern Nevada. Estimated water-withdrawal and related data were compiled from various sources to identify trends in Arizona, California, Nevada, New Mexico, and Utah. More water is used for agriculture than domestic and industrial use in these five States. From 1950 to 2000, however, the percentage increase in withdrawal for domestic water use exceeded that for agricultural use. The estimated amount of water withdrawn for domestic, agricultural, and industrial purposes in Arizona, California, Nevada, New Mexico, and Utah increased 58 percent, from 39.6 to 62.8 million acre-feet, from 1950 to 2000. During this period withdrawals for domestic water use, which included self-supplied domestic and public supply (all deliveries to residential, commercial, and some industrial users), increased 410 percent from 2.0 million to 10.2 million acre-feet and the population in these five Southwestern States increased 250 percent. From 1965 to 2000, water withdrawals for agriculture, which were primarily for irrigation of crops and livestock uses, increased 14 percent in the five States, from 44.0 to 50.2 million acre-feet, while irrigated acreage increased 12 percent from 12.6 to 14.1 million acres. Water-use trends in the Southwest are dominated by water use in California where crop acreage is more than twice as large as the combined crop acreages in Arizona, Nevada, New Mexico, and Utah, and the population in 2000 was more than three times larger than the combined population of these States. Withdrawals for agriculture in California accounted for 62 percent of the water withdrawals for agriculture in the five States in 1950 and 68 percent in 2000. Water withdrawals for domestic-water use in California declined from 82 percent of the total domestic-water withdrawals in all five States in 1950 to 70 percent in 2000, indicating that the need for domestic withdrawals increased more in Arizona, Nevada, New Mexico, and Utah combined than in California. The population of California is larger than the combined population of Arizona, New Mexico, Nevada, and Utah, but the combined population of these smaller States grew faster than the population of California. From 1950 to 2000 the California population increased 220 percent, but the combined population of the four other States increased 390 percent. From 1960 to 2000, public supply per-capita use increased in Arizona, New Mexico, and California, and decreased in Nevada and Utah. Crop-application rates (water withdrawal for irrigation of crops divided by the irrigated crop acreage) from 1965 to 2000 ranged from 2.32 acre-feet per acre in Utah in 1975 to 6.21 acre-feet per acre in Arizona in 2000. More water is used per acre of irrigated land in Arizona than in the other four States. This could be due to several reasons, including differences in climate, conveyance losses, length of growing season, and type of crops grown. Trends in water withdrawals for industrial use are difficult to identify because of differences in data reporting from year to year. From 1950 to 2000, withdrawal for industrial use in the five States was generally less than 6 percent of the total withdrawal. Withdrawal for industrial use was less than 4 percent of the total withdrawal in Arizona, except in 1990; industrial withdrawal was less than 6 percent in California and less than 7 percent in Nevada, New Mexico, and Utah, except in 1980 when in Utah it was almost 12 percent of the total withdrawal. From 1950 to 2000, ground-water withdrawals increased 324 percent in Nevada, 147 percent in New Mexico, 208 percent in Utah, and 52 percent in California. Ground-water withdrawal decreased 15 percent in Arizona. For all five States, ground-water withdrawals increased 62 percent.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 31.3314° to 41° latitude; -120° to -103° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Alice D. Konieczki, Julie A. Heilman. 2004. Water-use trends in the desert southwest: 1950-2000. https://doi.org/10.3133/sir20045148

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Karst hydrologic processes in carbonate fensters of the western Great Smoky Mountains, Tennessee, 2017–18

The geology of the Great Smoky Mountains in Tennessee and North Carolina is dominated by metamorphic strata. Along the western extent of the range, however, several carbonate fensters expose the Ordovician Jonesboro Limestone along the western edge of the Great Smoky Fault. The fensters (Cades Cove, Tuckaleechee Cove, and Wear Cove) create opportunities for allogenic recharge at the contact between the surrounding, relatively insoluble, strata and the underlying soluble formations, resulting in the development of karst systems. Karst environments have a high degree of connectivity between surface streams and groundwater systems; thus, karst aquifers are inherently vulnerable to contamination from surface activities. Karst environments also provide a specific environment for sensitive biota. Protection of the unique resources of karst environments requires an understanding of the behavior of karst aquifers, knowledge of karst recharge areas, and the mapping of groundwater flow paths. A study began in 2017 to characterize the hydrologic behavior of the karst systems in Great Smoky Mountains National Park through hydrologic monitoring, dye tracing, and seepage investigations. Hydrologic monitoring equipment was installed at several karst hydrogeologic features: two in-cave sites, two major springs, Abrams Creek in Cades Cove, and a karst depression wetland. Dye tracing was conducted to determine resurgences for the cave systems, to delineate spring recharge areas, and to estimate karst groundwater velocities. Seepage investigations along Abrams Creek helped determine if streams were sinking into the Jonesboro Limestone, either at the contact with insoluble strata or as streams flowed across the carbonate fenster. Study results indicate considerable differences in groundwater behavior between the conduit-dominated flow systems in Tuckaleechee Cove compared to the lower-gradient, colluvium-covered karst systems in Cades Cove. Study results also indicate that contaminants in the area of Bull sink and Whiteoak Sink could be rapidly transported through karst groundwater towards springs in Tuckaleechee Cove. Karst resources in Cades Cove are most likely to be affected by local events or activities taking place within the cove itself or in upper Abrams Creek upstream of the Great Smoky Fault. This study provides information on the vulnerability and uniqueness of the karst systems in the western Great Smoky Mountains, which are characterized by complex geology, high-gradient subterranean streams, deep caves, and carbonate fensters.

Tennessee↗

Analysis of groundwater geochemistry in the Lansing, Michigan, area

Groundwater resources in the Lansing, Michigan, area are protected by a wellhead protection plan, but previous studies have indicated that groundwater in this area may be susceptible to surface contamination. The U.S. Geological Survey, in cooperation with the Lansing Board of Water & Light, analyzed geochemical and aquifer characteristics to assess the potential for contamination of groundwater resources. Recharge age categories were determined from tritium concentrations for some wells, and by using ternary diagrams and principal component analysis for other wells. These age classifications, combined with hydrogeologic and geochemical data, were analyzed by using statistical methods to identify trends that may indicate areas of increased groundwater susceptibility. Wells with modern recharge tended to have higher sodium, chloride, and chloride:bromide ratios than did wells with mixed recharge, suggesting greater surface connectivity and potential influence from anthropogenic sources such as road salt. In contrast, wells in the mixed age category exhibited more stable geochemistry and lower constituent concentrations. Classification and regression tree models identified aquifer geometry—particularly the thickness of the uppermost bedrock unit and presence of confining layers—as key predictors of recharge age and geochemical indicators. The trends identified from these analyses could help to reveal locations in the Lansing area that are among the most susceptible to contamination.

Michigan↗

Evaluating the number of realizations (train-test splits) necessary to ensure robust estimates of conventional hydrothermal resource favorability using Monte Carlo cross-validation, the Great Basin, Western USA

Supervised machine learning approaches used to produce favorability maps in resource assessments commonly partition an input dataset into training and testing subsets (that is, through train-test splits). However, if a single split is not representative of underlying resource conditions, the resulting favorability map may be biased, particularly with sparse or heterogeneous datasets. To mitigate the potential for unrepresentative favorability maps, recent works by U.S. Geological Survey researchers have used Monte Carlo cross-validation to implement a large number ( n) of randomized train-test splits to produce n realizations. The realizations are then aggregated using cell-wise median predictions to produce the resulting final favorability map, recognizing that the median will remove extreme values that might have been estimated from a comparatively few unrepresentative realizations. Theoretically, the median prediction at every cell converges to a single estimate as n approaches infinity, and the question addressed herein is: How many realizations are necessary to get a robust estimate (that is, an estimate unaffected by additional realizations)? Therefore, convergence metrics are described to identify the number of train-test splits and realizations needed to make a reliable map using the data and supervised machine learning workflow for conventional hydrothermal resource assessment of the Great Basin of the Western United States. For this study, robust prediction occurs with n approximately equal to 600 realizations, and smaller ensembles (for example, n is approximately equal to 200 or even 100) may be suitable during preliminary or exploratory analyses. Although the resulting threshold numbers will vary depending on the data and modeling approach used, the convergence metrics proposed and applied herein are applicable to other supervised machine learning studies that use Monte Carlo cross-validation.

California, Idaho, Nevada, Oregon, Utah↗