Geology Reports⌕ Search
Home/Archive/USGS

USGS · sim3084

Terrestrial ecosystems - Isobioclimates of the conterminous United States

Jill J. Cress·Roger G. Sayre·Patrick Comer·Harumi Warner
View original source ↗Export metadata ↓

Abstract

As part of an effort to map terrestrial ecosystems, the U.S. Geological Survey has generated isobioclimate classes to be used in creating maps depicting standardized, terrestrial ecosystem models for the conterminous United States, using an ecosystems classification developed by NatureServe . A biophysical stratification approach, developed for South America (Sayre and others, 2008) and now being implemented globally, was used to model the ecosystem distributions. Bioclimate regimes strongly influence the differentiation and distribution of terrestrial ecosystems, and are therefore one of the key input layers in this biophysical stratification. The Rivas-Martínez methodology is based on the concept of establishing a quantifiable classification system which would closely relate the distribution of vegetation to climatic parameters and indices. This method first establishes bioclimatic indices calculated from various ranges of temperature and precipitation data, compares these indices to defined thresholds, and finally applies sets of decision rules to identify the climate classes. The climate classification is hierarchical with four levels: macrobioclimates, bioclimates, thermotypes, and ombrotypes. Thermotypes, which represent thermoclimatic belts, are identified using the positive annual temperature (Tp) thresholds or the compensated thermicity index (Itc) thresholds. Ombrotypes, which represent ombroclimatic belts, are based on the ombrothermic index (Io) which is calculated as a function of both the total positive precipitation and temperature . For this national implementation the source data used for establishing the bioclimatic indices was Daymet. Daymet temperature and precipitation data were developed from 18 years (1980–1997) of climatological records and is available at a spatial resolution of 1 kilometer . This implementation of the Rivas-Martínez methodology resulted in the generation of four climate layers for the conterminous United States: macroclimates, bioclimates, thermotypes, and ombrotypes. However, the biophysical stratification approach used for the ecosystems modeling effort required a single climate layer that accurately reflected regional variation in wet/dry gradients and hot/cold gradients, with a manageable number of classes. Therefore, the data layers for thermotypes and ombrotypes were combined, yielding 127 unique thermotype-ombrotype combinations.The isobioclimates image shows ombrotypic regions (dry/wet gradients) for each thermotypic (warm/cold) region. Additional information about this map and any of the data developed for the ecosystems modeling of the conterminous United States is available online at http://rmgsc.cr.usgs.gov/ecosystems/ .

Explore related subjects

Scientific Investigations MapReport
90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 24.856534339310674° to 49.38237278700955° latitude; -124.69482421875° to -66.961669921875° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jill J. Cress, Roger G. Sayre, Patrick Comer, Harumi Warner. 2009. Terrestrial ecosystems - Isobioclimates of the conterminous United States. https://doi.org/10.3133/sim3084

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2024

Potentiometric-surface and depth-to-water maps for spring 2024 were created for the Mississippi River Valley alluvial aquifer using groundwater-altitude data from 1,151 wells completed in the Mississippi River Valley alluvial aquifer and from the altitude of the top of the water surface in area rivers from 160 U.S. Geological Survey and U.S. Army Corps of Engineers streamgages. The potentiometric-surface and depth-to-water maps for 2024 were created to support investigations to characterize the Mississippi River Valley alluvial aquifer as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the Mississippi River Valley alluvial aquifer for spring 2024 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 330 feet (ft) above the North American Vertical Datum of 1988. The regional direction of the groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient direction was into the depression, and near rivers, where the groundwater gradient direction was either from the aquifer to the river or from the river into the aquifer. Groundwater depressions in the potentiometric-surface map are in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions. Depth to water by well in the Mississippi River Valley alluvial aquifer in spring 2024 ranged from 0.27 ft above land surface to 145.65 ft below land surface.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗
USGS2026

Color-Shaded Relief Bathymetry of Lake Chelan, Washington

In 2023, the U.S. Geological Survey (USGS) completed a 3-week field operation in Lake Chelan, Washington, the third deepest lake in the conterminous United States, to acquire sediment cores, high-resolution bathymetry data, and chirp sub-bottom profiles. The high-resolution bathymetry displayed in this map publication was collected using a Norbit Winghead i67-curved array multibeam system; raw data were cleaned and gridded (3 by 3 meters [m]) in the Teledyne CARIS software. In some locations where the slopes of Lake Chelan are near-vertical, multibeam returns were sparse, resulting in artifacts resembling holes that appear as grey dots within the color-shaded bathymetric relief. Although the 2023 bathymetric mapping of Lake Chelan resulted in similar morphometric characteristics to previous hydrographic campaigns (table 1; Kendra and Singleton, 1987; Pelletier and others, 1989), these new data provide a much more detailed understanding of the two physiographic basins that comprise Lake Chelan: the deeper (as deep as 445.8 m [fig. 1]; previously reported as 453 m) and narrower (1–2 kilometers [km] wide) Lucerne Basin to the north, and the shallower (as deep as 127.8 m [fig. 1]), and wider (2–3 km wide) Wapato Basin to the south. With this detailed imaging of Lake Chelan, we find pervasive morphological evidence of slope failure and mass-transport deposits (MTDs) in at least 89 locations within the lake and 63 subaqueous deltas (fig. 2). The deeper Lucerne Basin is dominated by steep slopes and numerous subaqueous deltas fed by steep fluvial catchments, whereas the Wapato Basin contains numerous landslide scarps, scars, and debris aprons along the more gently sloping lake margins, and abundant relict kettle structures from the Pleistocene deglaciation. Lake Chelan’s geomorphic, geophysical, and sediment data contain important records of glacial retreat and advance, regional volcanic eruptions, and earthquakes that generate ground motions severe enough to induce landslides recorded in the sediment as MTDs. The epicenter of the 1872 Washington State Earthquake (M 6.5–7.2; Bakun and others, 2002; Brocher and others, 2017; Sherrod and others, 2021) is along the Spencer Canyon Fault, near the southern end of Lake Chelan. Shaking from this earthquake was strong enough to affect local aquifers, induce liquefaction of unconsolidated sediments, produce large seiches (Brocher and others, 2018), and likely cause landslides within Lake Chelan.

Washington↗