Stratigraphic framework and depositional sequences in the Lower Silurian regional oil and gas accumulation, Appalachian Basin: From Licking County, Ohio, to Fayette County, West Virginia

Robert T. Ryder

doi:10.3133/sim2916

Home/Archive/USGS

USGS · sim2916

Stratigraphic framework and depositional sequences in the Lower Silurian regional oil and gas accumulation, Appalachian Basin: From Licking County, Ohio, to Fayette County, West Virginia

Robert T. Ryder

View original source ↗Export metadata ↓

Abstract

The Lower Silurian regional oil and gas accumulation was named by Ryder and Zagorski (2003) for a 400-mile (mi)-long by 200-mi-wide hydrocarbon accumulation in the central Appalachian basin of the Eastern United States and Ontario, Canada. From the early 1880s to 2000, approximately 300 to 400 million barrels of oil and eight to nine trillion cubic feet of gas have been produced from the Lower Silurian regional oil and gas accumulation (Miller, 1975; McCormac and others, 1996; Harper and others, 1999). Dominant reservoirs in the regional accumulation are the Lower Silurian "Clinton" and Medina sandstones in Ohio and westernmost West Virginia and coeval rocks in the Lower Silurian Medina Group (Grimsby Sandstone (Formation) and Whirlpool Sandstone) in northwestern Pennsylvania and western New York. A secondary reservoir is the Upper Ordovician(?) and Lower Silurian Tuscarora Sandstone in central Pennsylvania and central West Virginia, a more proximal eastern facies of the "Clinton" sandstone and Medina Group (Yeakel, 1962; Cotter, 1982, 1983; Castle, 1998). The Lower Silurian regional oil and gas accumulation is subdivided by Ryder and Zagorski (2003) into the following three parts: (1) an easternmost part consisting of local gas-bearing sandstone units in the Tuscarora Sandstone that is included with the basin-center accumulation; (2) an eastern part consisting predominantly of gas-bearing "Clinton" sandstone-Medina Group sandstones that have many characteristics of a basin-center accumulation (Davis, 1984; Zagorski, 1988, 1991; Law and Spencer, 1993); and (3) a western part consisting of oil- and gas-bearing "Clinton" sandstone-Medina Group sandstones that is a conventional accumulation with hybrid features of a basin-center accumulation (Zagorski, 1999). With the notable exception of the offshore part of Lake Erie (de Witt, 1993), the supply of oil and (or) gas in the hybrid-conventional part of the regional accumulation continues to decline because of the many wells drilled there since the late 1880s. However, new gas and local oil continues to be discovered in the deeper basin-center part (Zagorski, 1991; Pees, 1994; Petroleum Information Corporation, 1994). In general, only small quantities of gas have been produced from the Tuscarora Sandstone fields because of their generally poor reservoir quality and because of the low energy (Btu) content of the gas (Avary, 1996). Although fracture porosity is the dominant porosity type in the Tuscarora Sandstone gas reservoirs (Avary, 1996), there are several fields, such as Indian Creek, where intergranular porosity seems to be important (Bruner, 1983; Castle and Byrnes, 2005). In order to better understand the character and origin of the Lower Silurian regional oil and gas accumulation and its component parts, six cross sections were drawn through the Lower Silurian strata in parts of New York, Ohio, Pennsylvania, and West Virginia. The locations of all six cross sections are shown on sheet 2 (figs. 1 and 2) of this report. Each cross section shows the stratigraphic framework, depositional setting, sequence stratigraphy, and hydrocarbon-producing intervals of the Lower Silurian sandstone reservoirs and adjoining strata. Cross section F–F′ presented here is about 215 mi long and trends northwestward, approximately normal to the depositional strike of the Lower Silurian sandstone system, and extends through large stretches of the basin-center and hybrid-conventional parts of the Lower Silurian regional oil and gas accumulation.

Explore related subjects

Scientific Investigations Map Report

Source-reported bounding extent: 37.8333° to 40.25° latitude; -81.6667° to -80.9167° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Robert T. Ryder. 2006. Stratigraphic framework and depositional sequences in the Lower Silurian regional oil and gas accumulation, Appalachian Basin: From Licking County, Ohio, to Fayette County, West Virginia. https://doi.org/10.3133/sim2916

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2024

Potentiometric-surface and depth-to-water maps for spring 2024 were created for the Mississippi River Valley alluvial aquifer using groundwater-altitude data from 1,151 wells completed in the Mississippi River Valley alluvial aquifer and from the altitude of the top of the water surface in area rivers from 160 U.S. Geological Survey and U.S. Army Corps of Engineers streamgages. The potentiometric-surface and depth-to-water maps for 2024 were created to support investigations to characterize the Mississippi River Valley alluvial aquifer as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the Mississippi River Valley alluvial aquifer for spring 2024 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 330 feet (ft) above the North American Vertical Datum of 1988. The regional direction of the groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient direction was into the depression, and near rivers, where the groundwater gradient direction was either from the aquifer to the river or from the river into the aquifer. Groundwater depressions in the potentiometric-surface map are in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions. Depth to water by well in the Mississippi River Valley alluvial aquifer in spring 2024 ranged from 0.27 ft above land surface to 145.65 ft below land surface.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗

USGS2026

Color-Shaded Relief Bathymetry of Lake Chelan, Washington

In 2023, the U.S. Geological Survey (USGS) completed a 3-week field operation in Lake Chelan, Washington, the third deepest lake in the conterminous United States, to acquire sediment cores, high-resolution bathymetry data, and chirp sub-bottom profiles. The high-resolution bathymetry displayed in this map publication was collected using a Norbit Winghead i67-curved array multibeam system; raw data were cleaned and gridded (3 by 3 meters [m]) in the Teledyne CARIS software. In some locations where the slopes of Lake Chelan are near-vertical, multibeam returns were sparse, resulting in artifacts resembling holes that appear as grey dots within the color-shaded bathymetric relief. Although the 2023 bathymetric mapping of Lake Chelan resulted in similar morphometric characteristics to previous hydrographic campaigns (table 1; Kendra and Singleton, 1987; Pelletier and others, 1989), these new data provide a much more detailed understanding of the two physiographic basins that comprise Lake Chelan: the deeper (as deep as 445.8 m [fig. 1]; previously reported as 453 m) and narrower (1–2 kilometers [km] wide) Lucerne Basin to the north, and the shallower (as deep as 127.8 m [fig. 1]), and wider (2–3 km wide) Wapato Basin to the south. With this detailed imaging of Lake Chelan, we find pervasive morphological evidence of slope failure and mass-transport deposits (MTDs) in at least 89 locations within the lake and 63 subaqueous deltas (fig. 2). The deeper Lucerne Basin is dominated by steep slopes and numerous subaqueous deltas fed by steep fluvial catchments, whereas the Wapato Basin contains numerous landslide scarps, scars, and debris aprons along the more gently sloping lake margins, and abundant relict kettle structures from the Pleistocene deglaciation. Lake Chelan’s geomorphic, geophysical, and sediment data contain important records of glacial retreat and advance, regional volcanic eruptions, and earthquakes that generate ground motions severe enough to induce landslides recorded in the sediment as MTDs. The epicenter of the 1872 Washington State Earthquake (M 6.5–7.2; Bakun and others, 2002; Brocher and others, 2017; Sherrod and others, 2021) is along the Spencer Canyon Fault, near the southern end of Lake Chelan. Shaking from this earthquake was strong enough to affect local aquifers, induce liquefaction of unconsolidated sediments, produce large seiches (Brocher and others, 2018), and likely cause landslides within Lake Chelan.

Washington↗

USGS2026

Spectral characteristics and mapping of lithium-rich playas in the Basin and Range Province, western United States

This report presents a comprehensive set of prospectivity maps for lithium in brines located within the playas of the Basin and Range Province of western United States. The prospectivity assessment is based on criteria established in the descriptive deposit model outlined in a previous U.S. Geological Survey report, with a focus on regional remote sensing methodologies. The playas within the study area have been systematically ranked according to several key factors, including size, the presence and abundance of source rocks, vegetation as an indicator of water availability, documented prospects, and data products derived from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor. Notably, the deposits in the playa of Clayton Valley make it stand out as the sole lithium brine-producing playa in the United States. The ASTER sensor provides optimal regional coverage, characterized by a 60-kilometer swath width and unique multispectral capabilities that are not available with other remote sensing instruments. This report and the accompanying maps are intended to serve as resources for further multidisciplinary assessments of lithium or other elements or commodities where prospectivity can be inferred from the presence of proxies such as alteration minerals.

Arizona, Baja California, California, Chihuahua, I↗