Geology Reports⌕ Search

USGS · ofr79729

Preliminary report on the Pierre Shale in North Park, Colorado, and its correlation to Boulder, Middle Park, and Northwest Colorado

Abstract

The Pierre Shale consists of interbedded marine shale and sandstone representing nearly continuous marine sedimentation during Late Cretaceous time. The Pierre Shale and time-equivalent marine units in the western interior United States contain 28 ammonite range zones. The ammonites show such rapid evolution and such wide geographic extent that their range zones are useful for time-stratigraphic correlation of marine rocks. The Pierre Shale is exposed around the margins of the North Park basin in Colorado where its maximum thickness is about 5,500 feet. The formation overlies the Upper Cretaceous Niobrara Formation and is unconformably overlain by the Paleocene and Eocene Coalmont Formation. The Pierre Shale, which consists of an upper sandy member and a lower shaly member, is primarily marine in origin; however, the sandy member includes minor amounts of coal. Twelve ammonite range zones can be recognized in North Park, including ammonites as old as the early Campanian Baculites obtusus and as young as the early Maestrichtian Baculites eliasi. Zonal distribution indicates that the contact between members becomes older to the northwest. Comparison of the biostratigraphy of the Pierre Shale in North Park with that of the Pierre Shale near Boulder, Colorado, and in Middle Park, and of time-equivalent units in northwestern Colorado, indicates the following: (1) the Pierre Shale in North Park correlates to the upper Mancos Shale, lies Formation, and the lower Williams Fork Formation in northwestern Colorado; (2) two of the three strandlines, represented by nonmarine deposits in the sandy member, correlate to regionally recognized regressions of the Pierre sea; (3) parts of the North and Middle Park structural basin were eroded 1,900-2,300 feet deeper than the Boulder area during the Laramide orogeny; and (4) northwestern North Park was eroded 2,000 feet deeper than northeastern North Park and the area of the stratigraphic section in Middle Park.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Dawn H. Madden. 1979. Preliminary report on the Pierre Shale in North Park, Colorado, and its correlation to Boulder, Middle Park, and Northwest Colorado. https://doi.org/10.3133/ofr79729

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗

Special Contributing Area Loading Program user’s manual

Information on the Special Contributing Area Loading Program execution and functions are presented in this user’s manual. An appendix presents a potential improvement for the user to consider. The hydrologic routing simulation method to model flow through multiple reservoirs, or sewer system components, is described. The use of Special Contributing Areas is described to run a successful simulation, which includes user input of hydrologic time series of flow components and the necessary formats. Upon completion of a successful Special Contributing Area Loading Program simulation, the program outputs hydrologic time series and a descriptive text file containing the model results for each defined sub-unit, or Special Contributing Area. The output time series contain flows through, and overflows from, the three reservoirs in the series, and the text file contains input and output path locations.

Open-File Report↗

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report↗