Geology ReportsSearch

USGS · ofr791570

Stratigraphy and paleoenvironment of Miocene phosphatic rocks in the East San Francisco Bay region, California

Abstract

A stratigraphic study of the Monterey Group in the East San Francisco Bay Region, California, indicates that a depositional basin began to subside in early to middle Miocene time. The Miocene sea transgressed from the west or southwest, and the area subsided to a possible water depth of 500 to 2,500 m. The Monterey Group within the study area is a time-transgressive sequence of six sandstone and shale formations. Stratigraphic cycles of interbedded sandstone and shale formations are related to the amount of terrigenous sediment input into the basin as well as the depositional environment. During periods of low terrigenous sedimentation, biogenetic sedimentation in the form of diatomite layers were interbedded with hemipelagic muds and thin turbidite sands. These diatom-rich sediments were probably deposited within the upper bathyal zone (180 to 500 m) and, during lithification, diagenetically altered to form siliceous shales and cherts. As terrigenous sedimentation increased, probably due to periodic uplift east of the study area, biogenetic sedimentation was masked until finer grained sediment at a lower rate of deposition reoccurred. As the basin filled and a higher energy environment prevailed; coarse-grained sediment was again deposited until a lower energy environment resumed. Three types of inorganic phosphate are present within the study area: nodular, Pelletal, and pebbles of sandy phosphatic mudstone. The nodular phosphate is associated with the siliceous shale formations and formed within diatomite layers before compaction and lithification. The other two types of phosphate are found within the sandstone formations and probably originated in a shallower, higher energy environment than the siliceous shales. Faulting was active during middle to late Miocene time. The change in stratigraphic thickness across the Mission fault is 350 m which may approximate the vertical (?) displacement along this fault. This displacement took place in middle to upper Miocene time and apparently caused erosion of the upper formations of the Monterey Group on the west side of the Mission fault before the Briones Formation was deposited in late Miocene time. Depositional thinning of the Monterey Group in the southern portion of the study area may imply that the Hayward and Calaveras faults were also active at this time.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

James M. Hill. 1979. Stratigraphy and paleoenvironment of Miocene phosphatic rocks in the East San Francisco Bay region, California. https://doi.org/10.3133/ofr791570

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report

End-user needs for remote sensing wetlands of the Prairie Pothole Region of North America

The Prairie Pothole Region (PPR) of North America comprises globally important grassland and wetland ecosystems critical for numerous populations of migratory birds. Due to the importance of this region for migratory birds, and particularly waterfowl, and the threats of habitat loss due to intensifying agriculture, there is a mature and diverse system of conservation organizations, agencies, and partnerships that spends hundreds of millions of dollars annually on habitat conservation to support migratory bird populations. Remote sensing can be a powerful tool for observing and evaluating global change at large scales as well as expanding inferences from field studies to the broader landscape with statistical models. However, development and utilization of these tools has lagged behind their demand for several reasons, including concerns over spatial and temporal resolution and accuracy of products; perception of a misalignment with decision-maker needs; technological barriers such as skill sets of conservation professionals, computing resources, data access, and usability. In this report, we summarize the needs of conservation professionals and scientists who use or want to use remote sensing data products to inform science about wetland change and conservation of wetlands in the PPR. We assembled this information through several methods leading up to, during, and following a January 2026 PPR Wetland Remote Sensing Workshop. The workshop included United States and Canadian scientists, conservation professionals, and policy experts. Our goal was to bring together end-users and remote sensing product developers jointly to explore reducing the lag between product development and utilization of products to inform science and conservation. Specifically, we aimed to identify gaps in wetland remote sensing that limit effective monitoring, management, and conservation in the PPR, and to develop a framework that outlines pathways to address these gaps by fostering collaboration, improving communication networks, encouraging discussion, and building on existing and ongoing efforts. This report summarizes our participants’ descriptions of end-user needs and the outcomes of the workshop.

Prairie Pothole region

Bathymetric survey and storage capacity of Upper Lake Mary near Flagstaff, Arizona in 2024

The U.S. Geological Survey (USGS), in cooperation with the city of Flagstaff, collected bathymetric, light detection and ranging (lidar), and land-survey data of Upper Lake Mary in Arizona during the months of April and October 2024. The city of Flagstaff uses a combination of groundwater from well fields throughout the Flagstaff area and surface water, mainly from Upper Lake Mary, for its potable water supply. The purpose of the survey is to update previous surveys using new technology and compare the results to previous surveys to determine if there was a decrease in storage capacity that could affect the city’s water supply. The lakebed was mapped in April 2024 using a vessel equipped with a multibeam echosounder (MBES) and mobile lidar scanner with positioning captured using a real-time kinematic global navigation satellite system (RTK GNSS) base and receivers. In October 2024, areas of the reservoir that were too shallow for the boat and shoreline that were not captured by the vessel-based lidar were surveyed on foot using hand-held RTK GNSS receivers. At full pool (spillway elevation of 6,831.82 feet above NAVD 88 [2,082.34 meters (m)], Upper Lake Mary has a storage capacity of 16,449.80 acre-feet (20,290,611.73 cubic meters) and a surface area of 953.57 acres (3,860,926.075 square meters). The reservoir is 5.7 miles (9.7 kilometers) long and varies in width from 326 feet (99.36 m) near the central, narrow portion of the reservoir to 2,613 feet (796.44 m) in the upper portion. Comparisons between this survey and the previous two surveys from the 1950s and 2006 indicate no apparent decrease in reservoir area or storage capacity. Results of the 2024 survey indicate that Upper Lake Mary’s storage capacity increased by 0.9 percent from the 2006 survey and a 1.6 percent increase in surface area from the 2006 survey.

Arizona