Geology ReportsSearch

USGS · ofr76776

Groundwater from Lower Cretaceous rocks in Kansas

Abstract

Sandstones in Lower Cretaceous rocks contain supplies, of water that may be adequate to meet increasing present and future demands for supplemental municipal and domestic use in central and western Kansas. An estimated 70 to 80 million acre-feet (86,000 to 99,000 cubic hectometers) of water containing less than 1,000 milligrams per liter dissolved solids may be acceptable for use at the present (1976). An additional 10 to 15 million acre-feet (12,000 to 18,000 cubic hectometers) containing 1,000 to 3,000 milligrams per liter dissolved solids is estimated to be available for use in the future with appropriate desalinization. Lower Cretaceous rocks crop out from Washington County on the north to Comanche County on-the south. The rocks dip from a structural high in the southwest part of the State to structural lows in the northwest and north-central part. Depth below land surface increases generally northwestward to about 2,600 feet (790 meters); thickness of the rocks increases westward, nearly zero to about 850 feet (260 meters). The rocks consist chiefly of marine to nonmarine shale and silt- stone interbedded with coastal to deltaic sandstone. The interbedded sandstone, which composes about one-third of the rocks, consists of one or more lenses that thicken westward to about 400 feet (120 meters) in the central part of western Kansas. The yield of water to individual wells is related to areal extent, thickness, and interconnection of the sand lenses and to grain size and cementation of the sand. Large amounts of water may be pumped by wells where loosely cemented sand lenses are interconnected. Wells commonly yield adequate supplies for domestic and stock use; reported yields from municipal and irrigation wells range from about 100 to 2,000 gallons per minute (6 to 125 liters per second). Recharge to the Lower Cretaceous-rocks occurs in the area of outcrop and from hydraulically connected saturated Cenozoic rocks, especially in the southern part of the State. Movement of water is principally northeastward from areas of recharge to areas of discharge where streams intersect the sandstone outcrops. Water in the sandstone aquifers commonly is confined between beds of relatively impermeable shale, causing water in wells to rise above the top of the aquifer. Water levels fluctuate in response to changes in atmospheric pressure, recharge, and discharge; greatest fluctuations result from discharge to wells for municipal and irrigation use. Progressive declines in water levels have occurred where irrigation withdrawals exceed recharge. Calcium bicarbonate water is dominant near recharge areas; mixed sodium and calcium bicarbonate water and sodium chloride water become successively dominant as the water moves downgradient from the recharge areas. The quality of water ranges from fresh to very saline (less than 1.000 to 35,000 milligrams per liter dissolved solids). In the areas of generally fresh water, localized areas of calcium sulfate water result from solution of gypsum in the Kiowa Formation, and areas of sodium chloride water result from contamination by oil-field brines.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Katherine M. Keene, Charles Knight Bayne. 1976. Groundwater from Lower Cretaceous rocks in Kansas. https://doi.org/10.3133/ofr76776

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report

End-user needs for remote sensing wetlands of the Prairie Pothole Region of North America

The Prairie Pothole Region (PPR) of North America comprises globally important grassland and wetland ecosystems critical for numerous populations of migratory birds. Due to the importance of this region for migratory birds, and particularly waterfowl, and the threats of habitat loss due to intensifying agriculture, there is a mature and diverse system of conservation organizations, agencies, and partnerships that spends hundreds of millions of dollars annually on habitat conservation to support migratory bird populations. Remote sensing can be a powerful tool for observing and evaluating global change at large scales as well as expanding inferences from field studies to the broader landscape with statistical models. However, development and utilization of these tools has lagged behind their demand for several reasons, including concerns over spatial and temporal resolution and accuracy of products; perception of a misalignment with decision-maker needs; technological barriers such as skill sets of conservation professionals, computing resources, data access, and usability. In this report, we summarize the needs of conservation professionals and scientists who use or want to use remote sensing data products to inform science about wetland change and conservation of wetlands in the PPR. We assembled this information through several methods leading up to, during, and following a January 2026 PPR Wetland Remote Sensing Workshop. The workshop included United States and Canadian scientists, conservation professionals, and policy experts. Our goal was to bring together end-users and remote sensing product developers jointly to explore reducing the lag between product development and utilization of products to inform science and conservation. Specifically, we aimed to identify gaps in wetland remote sensing that limit effective monitoring, management, and conservation in the PPR, and to develop a framework that outlines pathways to address these gaps by fostering collaboration, improving communication networks, encouraging discussion, and building on existing and ongoing efforts. This report summarizes our participants’ descriptions of end-user needs and the outcomes of the workshop.

Prairie Pothole region

Bathymetric survey and storage capacity of Upper Lake Mary near Flagstaff, Arizona in 2024

The U.S. Geological Survey (USGS), in cooperation with the city of Flagstaff, collected bathymetric, light detection and ranging (lidar), and land-survey data of Upper Lake Mary in Arizona during the months of April and October 2024. The city of Flagstaff uses a combination of groundwater from well fields throughout the Flagstaff area and surface water, mainly from Upper Lake Mary, for its potable water supply. The purpose of the survey is to update previous surveys using new technology and compare the results to previous surveys to determine if there was a decrease in storage capacity that could affect the city’s water supply. The lakebed was mapped in April 2024 using a vessel equipped with a multibeam echosounder (MBES) and mobile lidar scanner with positioning captured using a real-time kinematic global navigation satellite system (RTK GNSS) base and receivers. In October 2024, areas of the reservoir that were too shallow for the boat and shoreline that were not captured by the vessel-based lidar were surveyed on foot using hand-held RTK GNSS receivers. At full pool (spillway elevation of 6,831.82 feet above NAVD 88 [2,082.34 meters (m)], Upper Lake Mary has a storage capacity of 16,449.80 acre-feet (20,290,611.73 cubic meters) and a surface area of 953.57 acres (3,860,926.075 square meters). The reservoir is 5.7 miles (9.7 kilometers) long and varies in width from 326 feet (99.36 m) near the central, narrow portion of the reservoir to 2,613 feet (796.44 m) in the upper portion. Comparisons between this survey and the previous two surveys from the 1950s and 2006 indicate no apparent decrease in reservoir area or storage capacity. Results of the 2024 survey indicate that Upper Lake Mary’s storage capacity increased by 0.9 percent from the 2006 survey and a 1.6 percent increase in surface area from the 2006 survey.

Arizona