Geology Reports⌕ Search

USGS · ofr7620

Physical constraints on sounds generated by very small earthquakes

Abstract

Vertical vibrations of the ground surface due to elastic waves from an earthquake will generate acoustic pressure waves in the overlying atmosphere. Sufficiently intense vibrations of the ground at frequencies greater than about 20 HZ can produce pressure waves that are within the audible range of many animals, including humans. People in the epicentral region of moderate to large earthquakes, for instance, commonly relate hearing sounds accompanying individual earthquakes (here we exclude sounds associated with mechanical resonances in structures such as houses). Descriptions of these sounds range from the report of distant guns to the rumble of thunder or the rushing of a wind (Davison, 1938; Lanchow Seismological Brigade, Appendix II). In many instances, the sounds are described as starting several seconds before the earthquake is felt. Experimental and theoretical verification that such earthquake sounds are generated by high-frequency ground motion from local earthquakes is based on simultaneous acoustic and seismic recordings recently obtained during a swarm of earthquakes in the Imperial Valley, California (Hill and others, 1976). These results show that for local earthquakes in the magnitude range 2 to-3, audible sounds are generated by the first arriving compressional (P) wave while perceptible shaking begins with the larger but slower shear (S) wave, explaining the reports that "earthquake sounds" are frequently heard several seconds before the earthquake is felt. A commonly proposed explanation for alleged anomalous animal behavior hours to days prior to large earthquakes suggests that animals with acute, high-frequency hearing respond to weak '''ultrasonic" sounds generated by small earthquakes occurring in the epicentral region of the impending event. Such earthquakes are presumably too small to be either felt or heard by humans in the region and too small to be routinely recognized as earthquakes on seismograms recorded on a local seismograph network. Evidence that such "popping and cracking" may occur in the region of an impending earthquake comes from laboratory experiments in which the rate of microfracturing in a rock sample subjected to large stress differences increases dramatically before catastrophic failure of the sample (Scholz, 1968; Stesky, 1975). In this paper we investigate the following question: What are the constraints on earthquake size (fault dimension and displacement) and hypocentral distance (distance from the earthquake focus to a point on the Earth's surface) such that animals noted for their acute hearing might react to the sound generated by the event while the same event would go undetected by humans (either by feeling, hearing, or routine identification on a local seismograph network)? Factors to be considered include: 1) the nature of the displacement spectral amplitudes of elastic waves radiated from an earthquake, 2) the effects of attenuation on the spectral components of elastic (seismic) waves over propagation paths from the focus to the Earth's surface, 3) the appropriate scaling of spectral amplitudes from moderate to very small earthquakes, 4) the coupling of elastic waves in the Earth to acoustic waves in the atmosphere, and 5) the threshold-of-hearing characteristics for various animals, including man. In considering these factors, we will find that, except for extremely small, shallow "earthquakes" (fracture dimension on the order of 10 cm and focal depths on the order of 10 m), acoustic emissions from premonitory fracturing ought to be equally audible to both people and animals in the immediate area of the fracturing.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

David P. Hill. 1976. Physical constraints on sounds generated by very small earthquakes. https://doi.org/10.3133/ofr7620

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗