Geology Reports⌕ Search

USGS · ofr69202

Cretaceous sedimentation and tectonism in the southeastern Kaiparowits region, Utah

Abstract

Upper Cretaceous strata in the southeastern Kaiparowits region of south-central Utah consist of approximately 3,500 feet of interfingering sandstone, mudstone, shale, and coal in the Dakota Formation (oldest), Tropic Shale, Straight Cliffs Formation, and Wahweap Formation (youngest). The formations consist of several depositional facies that can be recognized by characteristic lithologies bedding structures, and fossils; these are the alluvial plain, deltaic plain, lagoonal-paludal, barrier sandstone, and offshore marine facies. The distribution of facies clearly defines the paleogeography of the region during several cycles of marine transgression and regression. The nonmarine beds were deposited on a broad alluvial coastal plain that was bordered on the west and southwest by highlands and on the east and northeast by the Western Interior seaway. The marine beds were deposited whenever the seaway advanced into or across the region. The Dakota Formation and the lower part of the Tropic Shale were deposited in nonmarine and marine environments, while the shoreline advanced generally westward across the region. The middle and upper part of the Tropic Shale and the Tibbet Canyon and Smoky Hollow Members of the Straight Cliffs Formation were deposited in marine and nonmarine environments when the seaway had reached its greatest areal extent and began a gradual northeastward withdrawal. An unconformity at the top of the Smoky Hollow represents a period of erosion and possibly nondeposition before deposition of the John Henry Member of the Straight Cliffs. The John Henry Member grades from nonmarine in the southwest to predominantly marine in the northeast, and was deposited during two relatively minor cycles of transgression and regression. The Drip Tank Member at the top of the Straight Cliffs Formation is a widespread sandstone unit deposited mainly in fluvial environments. Some of the beds in the northeastern part of the region were probably deposited in marine waters during the final incursion of the seaway into the Kaiparowits region. The overlying Wahweap Formation was deposited in nonmarine environments. Slight but continued tectonism during Late Cretaceous time is indicated by lateral changes of facies and thickness variations that coincide at least partly with present structures. These criteria indicate that Laramide tectonism consisted of two phases. An early phase that lasted from about late Albian to late Campanian time included regional subsidence, basin downwarping, and movement on local folds and faults. A later phase that lasted from late Campanian to about late Paleocene time included regional uplift, monoclinal flexing, and probable new faulting, as well as continued basin downwarping and movement on local folds and probably on the older faults. The principal economic resource in the Kaiparowits region is bituminous or subbituminous coal in the john Henry Member. Because basin downwarping and movement on local folds occurred during deposition, the thicker and more continuous coal beds are in the ancestral synclines and tile deeper part of the structural basin. Presently indicated resources total 7.3 billion tons, but considerably larger quantities are probably present in the unexplored parts of the region. Several potential resources include ground water, titaniferous sandstone, and possibly oil and gas.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 37° to 37.5° latitude; -111.75° to -110.957° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Fred Peterson. 1969. Cretaceous sedimentation and tectonism in the southeastern Kaiparowits region, Utah. https://doi.org/10.3133/ofr69202

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗